COMMERCIAL SHOWERS ADA (COMMONWEALTH OF MASSACHUSETTS)

Transcription

1 COMMERCIAL SHOWERS ADA (COMMONWEALTH OF MASSACHUSETTS)

2 Curtain Rod Optional Peened s.s. grab bar 36" I.D. 41" O.D. 3/4" 25" 35" 48" 40" 75" 83" Model A3636 ADA-FUS-3/4 R: Valve right, seat left Model A3636 ADA-FUS-3/4 L: Valve left, seat right 36" I.D. 38" O.D. Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP226 Forward flange adaptor (consult representative) Collapsable water retaining strip #OP100 Drain relocation (see alt. drain position drawing) Semi-permanent threshold #OP305 Hand held shower w/ 60 flex hose & 24 slide bar Removable threshold #OP slide bar Halogen dome light #OP228 In-line vacuum breaker Pre-drilled for dome light #OP320 NOTE: Backing & bolts for fold-up seat may add up to 3/4 to overall dimensions. Pressure balanced shower valve 1 S.S Curtain rod #OP220 (Factory installed) 201/2" 161/2" 361/2 O.D. 24" 431/4" 40" 4" 5" 9" 3" Shower Enclosure shall be an ADA compliant Acryline, model number A 3636 ADA-FUS-3/4 R or L molded from a single sheet of cast acrylic resulting in no seams or joints. Unit shall have a 3/4 or less threshold lip with encapsulated steel reinforcement for level floor installation. Enclosure shall be certified ANSI Z124.2 with a backside flame spread of less than 30. Inside measures 36 x 36 x 80 1/2. Outside measures 41 x 36 1/2 x 83. Approximate weight 226 lbs. Enclosure equipped standard with HD white padded fold-up seat L/H #OP176 and 3 integral molded soap trays. Enclosure equipped with factory installed 18 gauge s.s.half wrap grab bars ; 1 half wrapped: 15 3/4 x 31 1/4 x 1 1/4 #OP215M & 1 vertical : 18 X 1 1/4 #OP212M (Grab bar to be peened). Grab bars to be installed with steel backing and shall be sealed to insure water tight integrity. Unit shall have 5/8 receiving flange, self-caulking brass drain with s.s. strainer #OP304 and the following options: ( HD White padded fold-up seat R/H #OP177 )

3 Curtain Rod Optional Peened s.s. grab bar 761/4" 491/4" Model A3636 ADA-FUS-2 R: Valve on right, seat on left Model A3636 ADA-FUS-2 L: Valve on left, seat on right 841/4" 36" I.D. 38" O.D. 161/2" 361/2 O.D. " 24" 4" 5" 9" 3" 41 1/4 " 411/4" 20 1/4 " 36" I.D. 41" O.D. 2" 36 1/4 " 261/4" 201/2" Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP226 Hand held shower w/ 60 flex hose & 24 slide bar Collapsable water retaining strip #OP100 Forward flange adaptor (consult representative) Semi-permanent threshold #OP305 Drain relocation (see alt. drain position drawing) Removable threshold #OP slide bar Halogen dome light #OP228 In-line vacuum breaker Pre-drilled for dome light #OP320 NOTE: Backing & bolts for fold-up seat may add up to 3/4 to overall dimensions. Shower Enclosure shall be an ADA compliant Acryline, model number A 3636 ADA-FUS-2 R or L molded from a single sheet of cast acrylic resulting in no seams or joints. Unit shall have a 2 or less threshold lip with MDF reinforcement for recessed installation. Enclosure shall be certified ANSI Z124.2 with a backside flame spread of less than 30. Inside measures 36 x 36 x 80 1/2. Outside measures 41 x 36 1/2 x 84 1/4. Approximate weight 226 lbs. Enclosure equipped standard with HD white padded fold-up seat L/H #OP176 and 3 integral molded soap trays. Enclosure equipped with factory installed 18 gauge s.s. grab bar; 1 half wrapped: 15 3/4 x 31 1/4 x 1 1/4 #OP215M & 1 vertical : 18 X 1 1/4 #OP212M (Grab bar to be peened).grab bars to be installed with steel backing and shall be sealed to insure water tight integrity. Unit shall have 5/8 receiving flange, self-caulking brass drain with s.s. strainer #OP304 and the following options: ( HD white padded fold-up seat R/H #OP177 ) Pressure balanced shower valve 1 S.S Curtain rod #OP220 (Factory installed) 441/2"

4 Model A6030 ADA-FUS-3/4 R: Seat on right Model A6030 ADA-FUS-3/4 L: Seat on left OPTIONAL CURTAIN ROD 82 3/4" 63"OD 30" 75" 13" 70 3/4" 20" 30"ID 30 1/2" 48" 42" 3/4" 25" 60 1/4 "ID 65 "OD 18" 35" Anchoring Tabs 32 1/2" NOTE: Backing & bolts for fold-up seat may add up to 3/4 to overall dimensions. Shower Enclosure shall be an ADA compliant Acryline, model number A6030ADA-FUS-3/4 R or L molded from a single sheet of cast acrylic resulting in no seams or joints. Unit shall have a 3/4 or less threshold lip with anchoring tabs and encapsulated steel reinforcement for level floor installation. Enclosure shall be certified ANSI Z124.2 with a backside flame spread of less than 30. Inside measures 60 1/4 x 30 x 78. Outside measures 65 x 30 1/2 x 82 3/4. Approximate weight 243 lbs. Enclosure equipped standard with HD white padded fold-up seat R/H #OP175 and 3 integral molded soap trays. Enclosure equipped with a factory installed 18 gauge s.s. half wrap grab bar 15 3/4 x 31 1/4 x 1 1/4 #OP215M (Grab bar to be peened). Grab bar to be installed with steel backing and shall be sealed to insure water tight integrity. Unit shall have 5/8 receiving flange, self-caulking brass drain with s.s. strainer #OP304 and the following options: ( HD white padded fold-up seat R/H #OP174 ) Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP227 Hand held shower w/ 60 flex hose & 24 slide bar Collapsable water retaining strip #OP101 Forward flange adaptor (consult representative) Semi-permanent threshold #OP307 Pressure balanced shower valve Removable threshold #OP slide bar Halogen dome light #OP228 In-line vacuum breaker Pre-drilled for dome light #OP320 1 S.S Curtain rod #OP222 (Factory installed)

5 Model A6030 ADA-FUS-2 R: Seat on right Model A6030 ADA-FUS-2 L: Seat on left OPTIONAL CURTAIN ROD 84" 63"OD 30" 761/4" 13" 20" 72" 30"ID 30 1/2" 491/4" 44" 2" 261/4" 60 1/4 "ID 65 "OD 361/4" 191/4" 32 1/2" NOTE: Backing & bolts for fold-up seat may add up to 3/4 to overall dimensions. Shower Enclosure shall be an ADA compliant Acryline, model number A6030 ADA-FUS-2 R or L molded from a single sheet of cast acrylic resulting in no seams or joints. Unit shall have a 2 or less threshold lip with MDF reinforcement for recessed installation. Enclosure shall be certified ANSI Z124.2 with a backside flame spread of less than 30. Inside measures 60 1/4 x 30 x 78. Outside measures 65 x 30 1/2 x 84. Approximate weight 243 lbs. Enclosure equipped standard with HD white padded fold-up seat R/H #OP175 and 3 integral molded soap trays. Enclosure equipped with a factory installed 18 gauge s.s.half wrap grab bar: 35 x 25 1/4 x 1 1/4 #OP215M (Grab bar to be peened). Grab bars to be installed with steel backing and shall be sealed to insure water tight integrity. Unit shall have 5/8 receiving flange, self-caulking brass drain with s.s. strainer #OP304 and the following options: ( HD white padded fold-up seat L/H #OP174 ) Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP227 Hand held shower w/ 60 flex hose & 24 slide bar Collapsable water retaining strip #OP101 Forward flange adaptor (consult representative) Semi-permanent threshold #OP307 Pressure balanced shower valve Removable threshold #OP slide bar Halogen dome light #OP228 In-line vacuum breaker Pre-drilled for dome light #OP320 1 S.S Curtain rod #OP222 (Factory installed)

6 Model A6036 ADA-FUS-3/4 R: Seat on right Model A6036 ADA-FUS-3/4 L: Seat on left 102mm 63"OD 82 3/4" Curtain rod optional 30" 1905mm 75" 70 3/4" 36"ID 36 1/2" 20" Peened s.s. grab bar 48" Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP227 Pressure balanced shower valve Collapsable Water retainer strip #OP101 Hand held shower w/ 60 flex hose Removable threshold #OP slide bar Semi-permanent threshold #OP307 In-line vacuum breaker Halogen dome light #OP228 1 S.S Curtain rod #OP222 (Factory installed) Pre-drilled for dome light #OP320 3/4" 25" 660mm 457mm 60 1/4"ID 65"0D 1651mm 19mm 18" 36" Forward flange adaptor (consult factory) 42" Shower Enclosure shall be an ADA compliant Acryline, model number A6036ADA-FUS-3/4 -R or L molded from a single sheet of cast acrylic resulting in no seams or joints. Unit shall have a 3/4 or less threshold lip with anchoring tabs and encapsulated steel reinforcement for level floor installation. Enclosure shall be certified ANSI Z124.2 with a backside flame spread of less than 30.Inside measures 60 1/4 x 36 X 78. Outside measures 65 x 36 1/2 x 82 3/4. Approximate weight 255 lbs. Enclosure equipped standard with HD white padded fold-up seat R/H #OP177 and 3 integral molded soap trays. Enclosure equipped with factory installed 18 gauge s.s.half wrap grab bar: 35 x 31 1/4 x 1 1/4 #OP217M (Grab bar to be peened). Grab bars to be installed with steel backing and shall be sealed to insure water tight integrity. Unit shall have 5/8 receiving flange, self-caulking brass drain with s.s. strainer #OP304 and the following options: ( HD White padded fold-up seat L/H #OP176 ) Anchoring Tabs 32 1/2" NOTE:Backing & bolts for fold-up seat may add up to 3/4 to overall dimensions.

7 Model A6036 ADA-FUS-2 R: Seat on right Model A6036 ADA-FUS-2 L: Seat on left 102mm 63"OD 84" Curtain rod optional 30" 76 1/4" 20" 72" 36"ID 36 1/2" Peened s.s. grab bar 49 1/4" Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP227 Pressure balanced shower valve Collapsable Water retainer strip #OP101 Hand held shower w/ 60 flex hose Removable threshold #OP slide bar Semi-permanent threshold #OP307 In-line vacuum breaker Halogen dome light #OP228 1 S.S Curtain rod #OP222 (Factory installed) Pre-drilled for dome light #OP320 2" 27 1/4" 660mm 457mm 60 1/4"ID 65"0D 1651mm Integral padded Fold-up seat Left or Right 19mm 19 1/4" 361/4" Forward flange adaptor (consult factory) 44" Shower Enclosure shall be an ADA compliant Acryline, model number A6036ADA-FUS-2 -R or L molded from a single sheet of cast acrylic resulting in no seams or joints. Unit shall have a 2 or less threshold lip with MDF reinforcement for recessed installation. Enclosure shall be certified ANSI Z124.2 with a backside flame spread of less than 30.Inside measures 60 1/4 x 36 X 78. Outside measures 65 x 36 1/2 x 84. Approximate weight 255 lbs. Enclosure equipped standard with HD white padded fold-up seat R/H #OP177 and 3 integral molded soap trays. Enclosure equipped with a factory installed 18 gauge s.s.half wrap grab bar: 35 x 31 1/4 x 1 1/4 #OP217M (Grab bar to be peened). Grab bars to be installed with steel backing and shall be sealed to insure water tight integrity. Unit shall have 5/8 receiving flange, self-caulking brass drain with s.s. strainer #OP304 and the following options: ( HD White padded fold-up seat L/H #OP176 ) 32 1/2" NOTE:Backing & bolts for fold-up seat may add up to 3/4 to overall dimensions.

8 Model A6031 TS ADA-R Model A6031 TS ADA-L 60" 83 1/2" 55" 73" 13" 30 1/2" 18" 4" 60" 35" 48 " 60" 55" 9" 34 1/2" 18 5/8" 40 1/2" 8 1/4" 3" ICC/ANSI 117.1/ANSI Z /2" NOTE: Backing & bolts for grab bars may add up to 3/4 to overall dimensions. Tub Enclosure shall be an ADA compliant Acryline, model number A6031ADA-TS R or L with removable wood grain phenolic seat #OP201. Unit shall be molded from a single sheet of cast acrylic resulting in no seams or joints and have a full MDF reinforced base for level floor installation. Enclosure shall be certified ANSI Z124.1 with a backside flame spread of less than 30. Inside measures 55 x 29 x 77. Outside measures 60 x 30 1/2 x 83 1/2. Approximate weight 247lbs. Enclosure equipped standard with 4 integral molded shelves at 34 1/2 & 52 above floor. Enclosure will be equipped with 3 factory installed 18 gauge S.S. grab bars 2X (48 x 1 1/4 ) #OP214MS & 1X (18 x 1 1/4 ) #OP212MS grab bars to be peened & installed with steel backing and shall be sealed to insure water tight integrity. Unit shall have 5/8 receiving flange, and the following options. White phenolic removable seat (special order) Anti-Bacterial curtain w/hooks #OP227 Pressure balanced T/S valve w/diverter spout Halogen dome light #OP228 Hand held shower w/ 60 flex hose & 24 slide bar Pre-drilled for dome light #OP slide bar 1 S.S Curtain rod #OP222 (Factory installed) In-line vacuum breaker