EXPECT SUPREME PE BALL VALVES
|
|
- Clementine Daniel
- 5 years ago
- Views:
Transcription
1 AVK MAGNUS BALL VALVES EXPECT SUPREME PE BALL VALVES
2 AVK MAGNUS RANGE ACCESSORIES & OPTIONS The AVK MAGNUS Series 85/50 is an extensive range of PE ball valves up to OD180mm, which have been extensively and independently type tested against worldwide leading standards such as EN and EN The AVK MAGNUS ball valves have undergone additional testing over and above that required in the specification. This ensures that the valve is suitable for distribution systems and environments anywhere in the world. The extensive AVK MAGNUS ball valve range consists out of multiple sizes starting as of OD25 up to OD180mm. Depending on the requested pressure rating the valves are available with SDR11 or SDR17.6 spigot ends. The valves are UNIVERSAL, meaning the same valve can be used for multiple application areas. The selected materials are tested and approved for both GAS and WATER applications. When used in GAS applications the valves are rated as MOP 10 and in case of WATER applications PN 16. As with all valves, best practice techniques should be used during installation and operation. To aid this process a series of recommended accessories is available, this includes a reliable installation and access system, retro fit extension spindles and lever operation. The valve access system consists of a support base, down pipe, surface box adaptor and surface box. The support base creates stability for the valve and avoids twisting of the pipe, but it also absorbs high loads and centres the down pipe installed on top of the valve ensuring valve operation at all times. The adaptor and surface box complete the valve access system. Besides giving access to the lower buried valve the surface box can bear media identification for easy recognition and, if required, customer specific logos. The AVK MAGNUS range is also available with purge and bypass points to enable them to be used for the safe isolation of pipe sections between strategic valves. The purge and bypass points are fully welded and pressure rated the same as the main valve. The purge valve is sealed off with a pressure retaining plug and can be operated with a stainless steel lever. Stem extension and purge points Lever Valve access system Support base 2 AVK MAGNUS BALL VALVES AVK MAGNUS BALL VALVES 3
3 FEATURES & BENEFITS All spigot ends can be delivered with the double spigot length option allowing for a second electro fusion weld if the first one fails. The spigots are butt welded to the body. Visual beads reassuring joint quality for each weld in complete pipe line. A The valves are equipped with two weather seals avoiding ingress of ground water and dirt into the operating mechanism. The stem is of the anti blow-out type and has a double O-ring seal to guarantee safety at all times. A Due to the internal and external drive the valves can be operated by all standardised spindles. B B If the valve is over torqued during opening or closing, the connector is designed to fail before the valve seals, thus preventing a leak to atmosphere. The safety connector can be replaced under live conditions. C D C The flexible spindle shaft ensures equal compression around the O-rings when loaded by internal pressure. At the same time the groove will adapt to any deformation as a result of upstream pressure on the ball when the valve is in the closed position. Body and spigots manufactured from high performance PE100-RC. This material is extremely resistant to slow crack propagation and can be welded to all PE100 and PE80 pipes. All AVK MAGNUS valves are designed with a full bore ensuring a low pressure drop and greater flow through the valve for the same pressure. The large bore allows for pigging of pipes. The spigot ends are machined on the inside as well as on the outside, guaranteeing a uniform wall thickness, allowing for optimal welding of electro fusion couplers and the smooth inner surface prevents deposits and will minimise flow resistance. 4 AVK MAGNUS BALL VALVES The floating ball principle and special shaped ball seat with large sealing surface are designed to ensure sealing at all times and be less affected by dirt or debry that might be in the pipeline. D The seat retainer and support ring design ensure the ball seat is kept in place at all times. This optimal design prevents the ball seat from being dislodged, which guarantees a good functionality throughout the years. AVK MAGNUS BALL VALVES 5
4 QUALITY IN EVERY STEP IDENTIFICATION & TRACEABILITY Construction & material selection The AVK MAGNUS ball valves are made out of PE100-RC offering excellent resistance to slow crack propagation and can be welded to all PE100 and PE80 pipes. The main internal construction of the AVK MAGNUS is based on a large ball seat arrangement for realiable sealing performance. By means of a seat retainer and dedicated support ring, the ball seat is firmly kept in place. The seat compression is accurately set by fixating the ball seat arrangement into the body, prior to welding. The spigots are butt welded to the body. Butt welding is chosen because of the long term practically proven reliability. For the welding, the leading DVS guidelines are strictly followed. The skimming and welding steps are performed by fully automated welding stations, guaranteeing ultimate consistency of the ball valves. For the sealing high quality and durable NBR rubber is used. The ball is made out of an engineering plastic that has very good scratch resistance and is carefully machined for lowest operating torque. Next to this, the chemical resistance to a very wide range of media is covered. The grease has been selected after numerous tests to achieve the maximum ease of operating. This universal grease has a very low wearing off from the lubricated surfaces, ensuring the long term performance of the valve. Approvals & testing AVK MAGNUS valves are fully type tested at an external worldwide reputable laboratory. The valves meet all the requirements of the EN1555-4, ISO4437-4, GB and EN During type testing, the valves are not only submitted to various long and short term leaktightness checks, but also to rigorous pulling, bending and thermal cycling tests. The operating mechanism and connector can withstand high prescribed torques at extreme temperatures. AVK Syntec is equipped with advanced test equipment, ensuring the highest quality of valves. Each valve is tested for operating torque and leaktightness at low and high pressure. Besides, per batch, valves undergo hydrostatic strength testing (at elevated temperatures) to confirm long term performance. Full traceability in a few simple steps... All AVK MAGNUS valves carry a unique serial number that is permanently dotmarked in the valve body directly after the welding process. Via this serial number all testing and production data for each individual valve can be retrieved. Also batch information of the raw material for every component is stored. In response to increasing demand on accurate and effective asset management, AVK has developed the AVIT system: AVK Valve Installation Tracker. With the AVIT system, key valve and installation data is stored together. DOWNLOAD THE APP This allows customers to fully record, track and identify exactly where their AVK valves are located. The AVK MAGNUS valve carries a QR code that can be scanned by using a simple app and smartphone. Next to the exact location data, a picture of the installed valve is saved. AVIT Web portal Via the AVIT Web portal the recorded valve data, including all the customer valve installation information gathered by the mobile application, can be accessed at a glance. This allows for easy and effective auditing of installed works. FULL TRACEABILITY AVIT PORTAL AVK VALVE INSTALLATION TRACKER SCAN THE QR CODE OF THE INSTALLED VALVE TAKE THE INSTALLATION PICTURE SET LOCATION 6 AVK MAGNUS BALL VALVES AVK MAGNUS BALL VALVES 7
5 AVK Syntec CO., LTD. Wujiang Industry Park, Hexian, Maanshan City, Anhui Province, P.R.China Copyright AVK Group A/S 2016 Tel.: +86(0) (0) Fax.: +86(0) Web:
EXPECT RELIABLE PE BALL VALVES
AVK CERTUS BALL VALVES EXPECT RELIABLE PE BALL VALVES AVK CERTUS RANGE RELIABLE VALVE ACCESS SYSTEM The AVK CERTUS Series 85/30 is an extensive range of PE ball valves up to OD180mm, which have been extensively
More informationSeries 85 Donkin Certus Range
Donkin Certus Range 2 Series 85 - Donkin Certus Range AVK group manufacture The AVK Group is dedicated to providing quality products which exceed local standards into the gas, water, waste water, fire
More informationHDPE FUSIBLE VALVES EXPECT INNOVATION
AVK HDPE FUSIBLE VALVES HDPE FUSIBLE VALVES EXPECT INNOVATION AVK HDPE VALVES SERIES 89 FUSIBLE BUTTERFLY VALVE Series 89 fusible butterfly valves are designed for quick, direct heat butt-fusion or electrofusion
More informationDONKIN ASSET PROTECTION SYSTEM WARRANTY UP TO 20 YEARS* DONKIN ASSET PROTECTION SYSTEM
DONKIN ASSET PROTECTION SYSTEM WARRANTY UP TO 20 YEARS* DONKIN ASSET PROTECTION SYSTEM THE DONKIN ASSET PROTECTION SYSTEM FOR VALVES As part of AVK s commitment to provide our customers with solutions,
More informationAVK VALVES FOR UNCONVENTIONAL GAS PROJECTS AVK FLOW CONTROL WE GUARANTEE SAFETY STANDARDS ARE MET SO CAN YOU
AVK VALVES FOR UNCONVENTIONAL GAS PROJECTS AVK FLOW CONTROL WE GUARANTEE SAFETY STANDARDS ARE MET SO CAN YOU AVK ONE OF THE WORLD S LEADING VALVE MANUFACTURERS The AVK Group, with its more than 100 companies
More informationPRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
More informationPBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
More informationAVK SERIES 55 AND 06 GATE VALVES, DN 450/500/600
AVK SERIES 55 AND 06 GATE VALVES, DN 450/500/600 1. Introduction The valve has a full and straight bore corresponding to the nominal diameter and can be installed independently of the flow direction. Although
More informationMCF BALL VALVES OVERVIEW
MCF BALL VALVES OVERVIEW ISSUED JULY 2014 MCF BALL VALVES OVERVIEW THE CENTER OF MCF MODULAR THREE-PIECE VALVE CONSTRUCTION, ISO 5211 TYPE BODY CONFIGURATION, ACCOMMODATES A WIDE CHOICE OF SEATS, SEALS,
More informationINSTALLATION - MAINTENANCE MANUAL Severe Service Series M4 Ball Valve
INSTALLATION - MAINTENANCE MANUAL Severe Service Series M4 Ball Valve Date: May 2016/ Page 2 of 12 Table of Contents 1. Safety Information - Definition of Terms..........................2 2. Bill of Materials....................................
More informationRare Plastics Rare SAPPMA IFPA
Rare Plastics manufacture and distribute HPE pipe & fittings from our factory in Meyerton, Gauteng. Pipes are manufactured to SANS ISO 4427 standards and sizes range from 110mm to 1000mm. The PE100 raw
More informationPE 100-RC ball valve THE MAINTENANCE-FREE HIGH-PERFORMANCE VALVE
PE 100-RC ball valve THE MAINTENANCE-FREE HIGH-PERFORMANCE VALVE EN The Plastics Experts. The AGRU isolation valve makes it possible to install continuous PE 100-RC pipelines without the extra effort of
More informationPlasson Solutions for Large Bore Pipes
Plasson Solutions for Large Bore Pipes Innovative Design Simpler Installation Plasson Quality and Reliability Plasson Large Bore PE Fitting Systems The use of PE has become well established in pipeline
More informationIMO-200EN 09/2010. Trunnion mounted forged ball valves Model FF and GG. Installation, Maintenance and Operating Instructions IMO-200EN 09/2010
IMO-200EN 09/2010 Trunnion mounted forged ball valves Model FF and GG Installation, Maintenance and Operating Instructions IMO-200EN 09/2010 2 IMO-200EN Table of Contents I GENERAL INFORMATION...................
More informationWATER APPLICATION POLYTEC POLYETHYLENE BALL VALVES
WATER APPATON POYTE POYETYENE BA VAVES 1-262-784-8180 or FAX 1-262-287-0086 Visit: www.rwlyall.com yall Polytec Ball Valves provide high performance applications to the following areas: Water Agriculture
More informationValves and accessories for gas
Valves and accessories for gas When safety counts! AVK INTERNATIONAL A/S When safety counts, you can count on products from AVK! It s all about safety Safety comes first. Therefore AVK does not compromise
More informationHDPE piping systems offer many benefits when compared to most other materials; which typically include the following:
Rare Plastics manufacture and distribute HPE pipe & fittings from our factory in Meyerton, Gauteng. Pipes are manufactured to SANS ISO 4427 standards and sizes range from 110 to 1000. The PE100 raw material
More informationBritish Standard institute-bs Valve Standards
BS 341-1:1991 Transportable gas container valves. Specification for industrial valves for working pressures up to and including 300 bar (REPLACED by BS EN 14189:2003), BS 341-3:2002), BS EN 849:1997),
More informationAVK SAUDI VALVES MANUFACTURING COMPANY
AVK SAUDI VALVES MANUFACTURING COMPANY AVK SERIES 24 - HIGH PRESSURE, WET BARREL HYDRANT FIELD MAINTENANCE AND INSTRUCTION MANUAL TABLE OF CONTENTS EXPLODED ASSEMBLY / PARTS LIST INTRODUCTION / DESCRIPTION
More informationFULL PORT STANDARD PORT COMPLETE SIZE RANGE. Superior Flow Easy Operation Full Traceability State-of-the-Art Manufacturing
FULL PORT STANDARD PORT COMPLETE SIZE RANGE Superior Flow Easy Operation Full Traceability State-of-the-Art Manufacturing An Employee-Owned Total Quality Management Company Made in America The Polyball
More informationVKD DN PP-H. DUAL BLOCK 2-way ball valve
VKD DN 65 100 PP-H DUAL BLOCK 2-way ball valve VKD DN 65 100 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball
More informationUNIJOINT is a company of. UNIJOINT Dismantling Joints
UNIJOINT is a company of UNIJOINT Dismantling Joints Essential for straightforward and secure installation Source: ABB Dismantling joints play a decisive role in the design and layout of pipelines and
More informationCEPEX PLASTIC VALVES EXTREME SERIES
CEPEX PLASTIC VALVES EXTREME SERIES Technical Product Presentation Cepex presentation Cepexis one of the leading European (Spanish) manufacturers of plastic valves and fittings. For more than 30 years
More informationVSI INDUSTRIAL BALL VALVES SERIES 7100 SERIES 8100 SERIES 7200 SERIES 8300 SERIES 7400 SERIES 8400 SERIES 8000 SERIES 8500
VSI INDUSTRIAL BALL BUTTERFLY VALVES VSI INDUSTRIAL BALL VALVES SERIES 7100 SERIES 8100 SERIES 7200 SERIES 8300 SERIES 7400 SERIES 8400 SERIES 8000 SERIES 8500 INSTALLATION, OPERATION AND MAINTENANCE MANUAL
More informationSB UNDERGROUND AIR VALVE ASSEMBLY INTRODUCTION FEATURES INSTALLATION
MAINTENANCE Installation, Operation INSTRUCTIONS and Maintenance SB UNDERGROUND AIR VALVE ASSEMBLY INTRODUCTION The A.R.I. Underground Air Valve System for water conveyance systems is a complete package
More informationIndustrial Turbo Meters, Sizes 2" through 6"
Industrial Turbo Meters Sizes 2" through 6" TUR-UM-00530-EN-19 (October 2014) User Manual Industrial Turbo Meters, Sizes 2" through 6" User Manual CONTENTS Scope of the Manual 5 Specifications 5 Product
More informationElectrofusion fittings
Systems Electrofusion fittings For gas, water and wastewater applications June 2018 Systems Maximum fusion integrity for pipeline longevity With 50 years expertise in the innovation, design and manufacture
More informationPush-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented
Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented PE-100 / PVC-U pull-out resistant long type Push-Fit Transition Coupling for PE-100 and PVC-U water pipes up to 16 bar d90
More informationPOLYTEC POLYETHYLENE BALL VALVES
WATER APPATON POYTE POYETYENE BA VAVES alifornia Office 2665 Research r. orona, A 92882 Wisconsin Office 16875 West Ryerson Rd. New Berlin, W 53151 RWyall.com ustomer Service (800) 535-9255 Polytec Ball
More informationTM SERIES Engineered Valves For Pipeline Service Application
Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt
More informationTRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
More informationKeystone Series GR resilient seated butterfly valves GRW/GRL Installation and operation manual
Before installation these instructions must be fully read and understood Important Before valves are installed or used the following actions are recommended. 1. Valves/parts have to be inspected and thoroughly
More informationTHERMOSTATIC INLINE CONTROL SHOWER VALVES Installation & aftercare instructions
THERMOSTATIC INLINE CONTROL SHOWER VALVES Installation & aftercare instructions Please retain for future reference DUAL INLINE CONCEALED VALVE SV2204 / SV4404 / SV5504 / SV6604 SV7704 / SV8804 / SV9904
More informationBUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More informationDK/CP DN PVC-U / PVC-C / PP-H / PVDF. Pneumatically actuated 2-way diaphragm valve
PVC-U / PVC-C / PP-H / PVDF Pneumatically actuated 2-way diaphragm valve DK/CP DN 15 32 The new DK/CP diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids.
More informationInstallation, Operation and Maintenance Manual
Installation, Operation and Maintenance Manual for the MOGAS Improved RSVP Metal Seated Ball Valve How to Install the valve properly Stress relieve welds according to ASME B31.1 ASME 1500 CLASS Maintain
More informationapproved IGS Polyethylene Valves Fax:(9821)
IGS-M-PL-015(1) approved Feb.2013!"# $%& IGS '( )*+,-./# Polyethylene Valves. Fax:(9821)-8131-5679 == >?@# DE ن' A=B $EB= F'&/D*# نG.< H(I >J KL+ DE ن' A=B F=MDE NJ http://igs.nigc.ir igs@nigc.ir N.I.G.C.
More informationV-SEGMENT SERIES V-Port Segment Control Valves (VS/VV/VM) Installation & Maintenance Manual
CAUTION: 1. For your safety read this manual before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved, and any hazardous fluids have been drained
More informationMERIDIAN, 2 or 3 PIECE, TRUNNION MOUNTED BALL VALVES
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS MERIDIAN, 2 or 3 PIECE, TRUNNION MOUNTED BALL VALVES Size Range 2 48 ASME Classes 150-2500 *It is recommended that the valve installer is familiar with
More informationOperating, Installation and Maintenance Instructions
Version 03/2015 Technical modifications reserved Page 1 of 14 TABLE OF CONTENTS 1. Applicable documents 3 2. Information on intended use 3 3. Design / function 5 3.1 Ball valve 5 3.2 Sealant / lubrication
More informationGeneral information Gate valves
General information Gate valves In 1957, Hawle invented the resilient-seated gate valve with multiple O-ring sealing of the valve spindle and had it patented. Today, this type of gate valve is the standard
More informationAccumulator charging valves & kits
accumulator charging valves & kits HYDROTECHNIK UK LIMITED Accumulator charging valves & kits Minimess gas charging valves Nitrogen pressure regulators & charging devices Nitrogen accumulator gas charging
More informationVXE DN PVC-C. Easyfit 2-way ball valve
VXE DN 10 50 PVC-C Easyfit 2-way ball valve VXE DN 10 50 FIP and Giugiaro Design designed and developed VXE Easyfit, the innovative True union ball valve with union nut tightening control system that permits
More informationCATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More informationDO NOT INSTALL, OPERATE, OR MAINTAIN AN ATI PRODUCT UNLESS TRAINED AND QUALIFIED IN PRODUCT AND ACCESSORY INSTALLATION, OPERATION AND MAINTENANCE.
IOM Supplement IOMS003 ATI HO1/HO2 HYDRAULIC OVERRIDE Scope of Supplement This supplement is intended to assist those who are involved with the installation, operation and maintenance of ATI Linear Actuators
More informationTECHNICAL BULLETIN. Audco Ball Valve. Reduced Bore Fire safe Flanged Ball Valves 51/52 Series. Experience In Motion
Audco Ball Valve Reduced Bore Fire safe Flanged Ball Valves 51/52 Series TECHNICAL BULLETIN Experience In Motion With the Series 51/52 designed to BS EN ISO 17292 / API 6D, AUDCO brings to the market a
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationIMPORTANT!!!! Read this manual before attempting any installation, wiring or operation.
Industrial Turbo Meters Sizes 2" through 6" Installation & Operation Manual IMPORTANT!!!! Read this manual before attempting any installation, wiring or operation. BadgerMeter,Inc. IOM-003-15 Part No.
More informationInstallation and Operating Instructions
Original Installation and Operating Instructions Hawle E2 Valve with Flange Outlet, System 2000 or PE Spigot Ends Table of Contents A) General...... 2 A1 Symbols..... 2 A2 Intended use... 2 A3 Labeling...
More informationKEYSTONE OPTISEAL F14/16-15/17 AND BREWSEAL BUTTERFLY VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood 4. Ozone: storage rooms should not contain any equipment generating ozone. E.g. lamps, electric motors. IMPORTANT Before valves
More information485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More informationBlack Hills Energy Contractor Covered Task List Last updated 10/10/2018
007 Operate Valves 103 Non-destructive Testing (Other than testing of welds) -- Mag Particle 201 Abnormal Operating Conditions Related to Welding on Pipelines 195.452(h) 192.225 192.227 192.715 192.717
More informationFLOWSERVE CORPORATION NOBLE ALLOY VALVE BALL VALVE REPAIR INSTRUCTION
FLOWSERVE CORPORATION NOBLE ALLOY VALVE BALL VALVE REPAIR INSTRUCTION Cookeville Valve Operation 1978 Foreman Drive Cookeville, TN 38541 PH: 800-251-6761 931-432-4021 FAX: 931-432-5518 CONTENTS FLOWSERVE/NOBLE
More informationAim higher. Soil & Waste System
Aim higher Soil & Waste System Driven by durability FACT Trend towards prefabrication In most countries the labour costs are becoming an increasing part of the total installed cost of a project. To keep
More informationCOMMERCIAL. BV & BVM Series Installation Instructions 06/29/15
COMMERCIAL Bray Controls Commercial Division 13788 West Road, Suite 00A Houston, Texas 77041 BCDSales@Bray.com Phone: 1-888-41-79 Fax: 1-888-41-70 www.braycommercialdivision.com BV & BVM Series Installation
More informationCompoSeal butterfly valves, wafer style Installation & Maintenance Instructions
Please read these instructions carefully This symbol indicates important messages and safety instructions. Intended valve use The valve is intended to be used only in applications within the pressure/temperature
More informationKeystone Butterfly valves ParaSeal Installation and maintenance instructions
Before installation these instructions must be fully read and understood Please read these instructions carefully Hazard potentials: disregarding of instructions improper use of product insufficiently
More informationPERFECTION IS OUR STANDARD...
PERFECTION IS OUR STANDARD... WELCOME TO COLSON X-CEL LTD Providing Precision engineering solutions for the most demanding environments Colson X-Cel Ltd is a well established and most highly respected
More informationENGINEERING STANDARD
PAGE: 1 OF 31 SUBMITTED BY: J. JOSEPH APPROVED BY: ED PEARSON Overview Vendor: Cameron Valves and Measurement 3250 Briarpark Drive Houston, Texas 77041 U.S.A. Telephone: 281-499-8511 Fax: (281) 261-3635
More informationEngineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
More informationlarge diameter ElectroFusion fittings & tools for large diameter pipes
large diameter ElectroFusion fittings & tools for large diameter pipes Page 2 Couplers for Large Diameter Pipes Couplers PN10 and PN16 Why use Large Diameter ElectroFusion Couplers Narrow trenches and
More informationHOT TAPPING & PLUGGING SOLUTIONS
HOT TAPPING & PLUGGING SOLUTIONS STOPPLE Plus System Combined with a LOCK-O-RING Plus completion plug, the STOPPLE Plus fitting reduces installation time, simplifies the setting process, and eliminates
More informationVAG Non-Return Valves
VAG Non-Return Valves VAG SKR Slanted Seat Tilting disk Check Valve Shaft Bearing bush Disk Seat Nominal pressures PN 10, 16 Nominal diameters DN 200 1400 Fields of application: drinking water, preclarified
More informationFully Welded Ball Valves
Fully Welded Ball Valves API6D & API6D SS COMPANY PROFILE: Established: 1956, Family Owned and Operated Managing Director: Thomas Böhmer PhD Eng. (Dr. Ing.-Germany) Employees: 270 Annual Sales: Facilities:
More informationOperating & Maintenance Manual For Steam Conditioning Valve
For Steam Conditioning Valve 1 Table of Contents 1.0 Introduction 3 2.0 Product description 3 3.0 Safety Instruction 4 4.0 Installation and Commissioning 5 5.0 Valve Disassembly 6 6.0 Maintenance 6 7.0
More informationSKF Explorer angular contact ball bearings. Designed to run faster, cooler, smoother, longer
SKF Explorer angular contact ball bearings Designed to run faster, cooler, smoother, longer Improve performance and increase service life Screw compressors, pumps and gearboxes require bearing arrangements
More informationSFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 *
SFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 * PRODUCT: Heavy Duty Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards
More informationIntegral Ignition Coils For Shielded Applications
Integral Ignition Coils For Shielded Applications GAS ENGINE TECHNOLOGY reliable efficient worldwide Integral Ignition Coils Slim Design General Features Primary connector pole for ALTRONIC compatibility
More informationTHD-SERIES S11DA280 THRU S27DA1020 & S11SR280 THRU S27SR1020 DOUBLE ACTING & SPRING RETURN SCOTCH YOKE ACTUATORS
THD-SERIES S11DA280 THRU S27DA1020 & S11SR280 THRU S27SR1020 DOUBLE ACTING & SPRING RETURN SCOTCH YOKE ACTUATORS INTRODUCTION A-T Controls THD scotch yoke actuators have been designed and engineered to
More informationBall valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
More informationB kv T&D GAS INSULATED SWITCHGEAR
GAS INSULATED SWITCHGEAR B 105 170 300 kv The increasing demand for electrical power in cities and industrial centers necessitates the installation of a compact and efficient distribution and transmission
More informationDUCTILE IRON FLANGED GATE VALVES for gas distribution DN40 DN300 PN16 max operating pressure MOP 16 bar
DUCTILE IRON FLANGED GATE VALVES for gas distribution DN40 DN00 PN6 max operating pressure MOP 6 bar Opracował T.Włoch 7..206 Sprawdził M. Dyrlaga 7..206 Zatwierdził J.Karpiński 7..206 Ductile Iron Flanged
More informationA Quick reference guide to the installation of Uniflex. Oldham Seals Group. Uniflex installation Guide
A Quick reference guide to the installation of Uniflex. Oldham Seals Group Uniflex installation Guide Uniflex Guide From Oldham Seals Group Introduction: Uniflex systems provide a means of remote Valve
More informationAGN 076 Alternator Bearings
Application Guidance Notes: Technical Information from Cummins Generator Technologies AGN 076 Alternator Bearings BEARING TYPES In the design of STAMFORD and AvK alternators, the expected types of rotor
More informationFE DN PVC-U. Butterfly valve
FE DN 40 200 PVC-U Butterfly valve FE DN 40 200 The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling
More informationProduct Specifications
PE 100 Metric Piping System Specifications 1. Scope This specification covers requirements for the +GF+ Georg Fischer (later named only +GF+) PE 100 Piping System intended for a wide range of applications
More informationTEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
More informationMSC Manifolds - DIN for Steam Distribution and Condensate Collection Installation and Maintenance Instructions
1170650/3 IM-P117-17 ST Issue 3 MSC Manifolds - DIN for Steam Distribution and Condensate Collection Installation and Maintenance Instructions 1 General safety information 2 General product information
More informationPERFECTION IS OUR STANDARD... LARGE BORE AND METAL SEALED DOUBLE BLOCK AND BELEED VALVES
PERFECTION IS OUR STANDARD... LARGE BORE AND METAL SEALED DOUBLE BLOCK AND BELEED VALVES WELCOME TO COLSON X-CEL LTD Colson X-Cel Ltd range of Double Block and Bleed (DBB) large bore pipeline ball valves
More informationVXE DN PVC-U. Easyfit 2-way ball valve
VXE DN 10 50 PVC-U Easyfit 2-way ball valve VXE DN 10 50 FIP and Giugiaro Design designed and developed VXE Easyfit, the innovative True Union ball with union nut tightening control that permits simple
More informationSERVICE BULLETIN for Series HFC-134a BalLoc Coupler Model 87 (High Side)
Production Control Units, Inc. 2280 West Dorothy Lane, Dayton, Ohio 45439-1892 Phone (937) 299-5594 FAX: (937) 299-4843 Production Control Units, Inc. U.S.A. Web: www.pcuinc.com SERVICE BULLETIN for Series
More informationSFI SPECIFICATION 15.4 EFFECTIVE: JULY 20, 2010 * PRODUCT: Top Fuel and Funny Car Drag Race Drive Beadlock Wheels
SFI SPECIFICATION 15.4 EFFECTIVE: JULY 20, 2010 * PRODUCT: Top Fuel and Funny Car Drag Race Drive Beadlock Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures
More informationManual and Specialty Valves. Efficient Fluid Processing. ease and thoroughness of CIP incorporating new technology and innovation
Valves are important to any processing system. That s why many trust the experience and innovation of Alfa Laval. Manual and Specialty Valves Efficient Fluid Processing The key to efficient fluid processing
More informationPIPELINE PIGS types of mechanical pigs. Pig length (inches) = 1 and ½ pipeline diameters.
PIPELINE PIGS A cleaning pig is any free traveling cleaning device that is sent through a pipeline by product flow to scrape and brush foreign deposits, rust and dirt and fluids from the inside surface
More informationSY-SERIES S04DA75 THRU S06DA180 & S04SR75 THRU S06SR180 DOUBLE ACTING & SPRING RETURN SCOTCH YOKE ACTUATORS
SY-SERIES S04DA75 THRU S06DA180 & S04SR75 THRU S06SR180 DOUBLE ACTING & SPRING RETURN SCOTCH YOKE ACTUATORS INTRODUCTION A-T Controls SY scotch yoke actuators have been designed and engineered to provide
More informationDKD/CP DN PVC-U. Direct action pneumatically actuated 2-way diaphragm valve
DKD/CP DN 15 65 PVC-U Direct action pneumatically actuated 2-way diaphragm valve DKD/CP DN 15 65 The DKD/CP diaphragm valve is particularly suitable for shutting off very dirty and/or highly viscous fluids.
More informationKEYSTONE SERIES 320 BUTTERFLY VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood HAZARD POTENTIALS disregarding of instructions improper use of product insufficiently qualified personnel Valve application to be
More informationMAINTENANCE INSTRUCTIONS VDL WEWELER HD & MBS-L/V/W/F AIR SUSPENSION SYSTEMS
MAINTENANCE INSTRUCTIONS VDL WEWELER HD & MBS-L/V/W/F AIR SUSPENSION SYSTEMS DOCUMENT: DATE: 05-2017 REVISION: - Contact Details For additional information contact VDL Weweler b.v. P.O. Box 142, 7300 AC
More informationPRODUCT CATALOGUE DOUBLE PREINSULATED PIPES
PN-EN 15698-1 ITB Technical Approval AT-15-7772/2008+ Annex no.1 Validity term: September 30, 2013 Issued by the Building Research Institute in Warsaw Preinsulated Pipe System To Be Used In Buried Thermal
More informationDesign specifications
Design specifications Design To relevant standards: IEC, VDE, DIN, ISO, EN With squirrel-cage or slipring rotor Degree of protection IP 55 / IP 65 Cooling method IC511, suitable for both indoor and outdoor
More informationDelayed Coking. Process Overview
Process Overview Page 1 of 6 History of the Delayed Coking Process Petroleum coke was first made by the pioneer oil refineries in Northwestern Pennsylvania in the 1860 s. Primitive distillation techniques
More informationMounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Type 3535 Three-way Valve with bellows seal and rod-type yoke (partial view) Mounting and Operating Instructions EB 8135/8136 EN Edition
More informationFRP Ball Valves INSTALLATION & MAINTENANCE MANUAL
FRP Ball Valves INSTALLATION & MAINTENANCE MANUAL FRP BALL VALVES TABLE OF CONTENTS MAINTENANCE AND INSTALLATION INSTRUCTIONS 1. 2. 2.1 2.2 2.3 2.4 GENERAL...Page 1 HANDLING...1 Receiving and Storing...1
More informationBall Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
More informationAir Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
More informationHYMAX GRIP Wide-Range Restraint Solutions
HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine
More informationFisher TBX Hydro Plug Fixture
Instruction Manual TBX Hydro-Plug Fixture Fisher TBX Hydro Plug Fixture Contents Introduction... 1 Scope of Manual... 1 Description... 2 Educational Services... 2 Principle of Operation... 2 Maintenance...
More informationOperation and Maintenance Model 89016
CABLE FLEETER Operation and Maintenance Model 89016 All rights reserved. No part of this publication may be copied, reproduced or transmitted in any form whatsoever without the written permission of General
More information