THE INTEGRATED LED LIGHTING RANGE

Transcription

1 THE INTEGRATED LED LIGHTING RANGE

2 THE RANGE EVO INTEGRATED LED BULKHEAD Available in two designs; circular and eyelid. Both utilise opal opticalgrade polycarbonate diffusers and a reinforced, impact-resistant polycarbonate body. The product is double insulated and an earth-loop terminal is provided for convenience. OMNI TRICOLOUR FIRE RATED LED DOWNLIGHT switch, allowing the selection of colour NANO 5 COMPACT FIRE RATED LED DOWNLIGHT model, both feature a compact, highpowered driver which is designed to be as small as possible whilst remaining suitable PICO FIXED LED DOWNLIGHT and where the void depth is limited. Producing excellent light output for the power utilised. PICO FG FIRE RATED FIXED LED DOWNLIGHT Ideal for installations where the void depth is limited and

3 The Inceptor Range is perfect for all types of installations... TM Easy Connections All products within the Inceptor lighting range*, come pre-wired with both male and female Flow TM connectors, creating a range of lighting which is quick and easy to install as well as to remove and replace for the purpose of circuit testing. *excluding the Pico and Pico FG. The Inceptor lighting range combines a number of key features which we believe sets it apart from competitor products. Firstly each product within the range comes with integrated LED and driver... Complete Control The Click Smart system makes it easy to adapt and upgrade your home, offering a smart solution that has at its core, accessibility and simplicity for the end user. All products within the Inceptor lighting range are compatible with Scolmore s range of Click Smart wiring accessories, providing simple, flexible installation and complete control. Product Warranties The Inceptor lighting range are covered by the individual warranties shown below... Fire Rated Products which incorporate our award-winning FlameGuard system technology, benefit from a 30, 60 & 90 minute fire rating and are acoustic and airflow compliant. Complies with Part B, P, E, C, L Acoustic tested to BS EN ISO : 2010 & BS EN ISO : 2010+A1: 2015 whilst satisfying Robust Details Appendix F requirements Fire rated in accordance with EN : 2014, BS 476: Part 21: YEAR WARRANTY (Registered) 2 YEAR WARRANTY 2 YEAR WARRANTY 2 YEAR WARRANTY 3 YEAR WARRANTY 30 minutes Tested and compliant using I Joist, metal web joist and solid timber joist. 60 minutes Tested and compliant using I Joist, metal web joist and solid timber joist. 90 minutes Tested and compliant using solid timber joists. For individual constructions see the designated test reports available on request.

4 Inceptor Omni Tricolour Construction Pre-wired Connector TM Fire -Rat ated Mi nutes Switchable Colour Temperature Cut-Out: 65-70mm Removable Insulation Support Bracket helps create an air space allowing heat to dissipate and reduce temperatures. The key feature on the Omni is a built-in three position switch. This switch grants the ability to change the colour temperature instantly to suit the installation. Compact Driver The Inceptor Omni s high powered compact driver has been designed to be as 4200K 50 O BEAM ANGLE COOL WHITE 580LM 2700K 40 O BEAM ANGLE WARM WHITE 500LM 6500K 65 O BEAM ANGLE DAYLIGHT 550LM Trademark Intumescent Strip Removable Insulation Support Bracket Our trademark blue strip of intumescent adds an extra barrier of protection against Multiple Moisture Seals User Changeable Fixed & Adjustable Bezels The Omni comes with a fixed bezel as standard. The adjustable Omni bezel can be purchased separately. The bezels have a twist and lock feature so that they can be quickly and easily replaced as required. Improved Cooling Our Patented, multifunctional heat sink not only channels heat away from the LED Chip, it also grants the unit s ability Ensures that water does not enter ceiling void through or the unit making it suitable for kitchens and bathrooms. Dual-phosphor Chip-On-Board Our dual-phosphor COB architecture has been colour temperatures from a single-point light source. Faceted Lens (Halogen Effect) The custom-built, multifaceted lens gathers the natively broad beam of beam angles to best replicate a traditional halogen lamp (at 2700K). FIXED FIXED

5 Inceptor Nano 5 Construction Pre-wired Connector TM Fire -Rat ated Mi nutes Compact Driver Cut-Out: 60mm (FIXED) 75mm (ADJUSTABLE) The Nano 5 has a custom-built, high-powered and extremely compact driver, designed to deliver maximum power in the smallest possible space. Engine The engine combines a 4.8W driver, Cast Aluminium Heat Sink and SMD LED chip together with a Flow Connector for straight-to-mains connection. SMD LED Technology Available in Fixed or Adjustable versions Nano 5 has a choice of a fixed or an adjustable model, both feature a compact, high-powered driver. The driver is designed to be as small as possible, whilst remaining suitable for installation into a fire rated ceiling. Fire-Rated Body The steel body, together with the Intumescent band, provides the Ratings. The unique twin-section bracket has been optimised to for the lowest possible weight.. Trademark Intumescent Strip SMD LED s require lower current and create less heat than standard LEDs, perfect when space is at a premium. Faceted Lens (Halogen Effect) The custom-built, multifaceted lens gathers the natively broad beam of the SMD LED and focuses the emitted light into a 40 beam angle to provide a clean, crisp light that rivals a traditional halogen lamp. Two Colour Temperatures Our trademark blue strip of intumescent adds an extra barrier Optics Platform Moisture Seals Both versions of the Nano 5 (fixed and adjustable) are available as either Cool White or Warm White The optics platform comprises an aluminium body which holds the Lens creating a 40 o beam angle. Ensures that water does not enter ceiling void making it suitable for kitchens and bathrooms. Bezel 4000K 40 O BEAM ANGLE COOL WHITE 450LM 2700K 40 O BEAM ANGLE WARM WHITE 400LM Insulation Support Clip Available The bezels are available in white, chrome and satin chrome for both 5 FIXED ISC1020

6 Inceptor Evo Construction Pre-wired Connector TM 4200K 120 O BEAM ANGLE COOL WHITE Circular and Eyelid Designs Circular Diameter: Ø308mm Recess Bracket Surface Mount Adaptor Ring Evo has a choice of a circular or eyelid design. Both utilises opal optical-grade polycarbonate diffusers and a reinforced, impact resistant polycarbonate body (IK08). A + energy rating and an L70 LED lifetime of 50,000 hours, the fitting affords excellent opportunities for cost savings compared to traditional lamp types. Fast-Fit Installation The Evo twist and lock installation process saves time and simplifies the maintenance and servicing of the luminaire. Evo also has one rear and four side entry points. Rear cable access is achieved via the rubber grommet in the centre. Suitable for use with 20mm and 25mm conduit fixings. Anti-Tamper Screw Eyelid 95mm Depth 93mm Depth mounted or for installing within the metal enclosure. Base Includes moisture seal to achieve IP65 rating. Multiple base mounting options entry points and one rear entry point. Driver The driver converts mains AC voltage input to DC voltage output to the LED array. Double insulated and an earth-loop terminal is provided for convenience. Flow Pre wired 4 pole Flow connector to aid installation and future maintenance. Microwave Sensor Saves energy by switching bulkhead on when presence is detected. Time adjustment from 8 secs 20 minutes. Daylight sensor adjustment from lux. Detection adjustment from 1 10 meters. Suitable for switching loads of up to 1000W. Microwave sensor controls orientated to allow easy adjustment during installation. Battery - 3 Hour Emergency Operation Provision for over three hours reduced light output in the event of mains power failure. The emergency luminaire looks the same as that of the mains only luminaires, for consistency throughout installation. LED Array Contains up to 170 LED s to create a uniform spread of light. The energy saving LED s provide a cool white output whilst achieving up to 1370 lumens, a perfect replacement for a traditional Diffuser The anti-tamper feature prevents unauthorised access, removal or theft of the luminaire. Creates an even spread of light which eliminates bright spots and reduces glare from LED array. Circular Style Fascia Secures the diffuser in position. Attaches to base using twist and lock mechanism.

7 Inceptor Evo Metal Enclosures LED Cut-Out: 65-75mm Die-Cast Aluminium Body The Evo s robust polycarbonate construction can be enhanced further by encasing the body in a metal enclosure, this provides excellent vandal resistant protection (IK10). The die cast aluminium body ensures a high grade surface finish and a solid body to help keep the bulkhead protected from damage that may occur, especially in commercial areas. The circular Evo design fits within all three die-cast aluminium body options. Steel Base Plate With the same cable entry locations as the main body; the side entries are sealed with removable inserts. The steel base plate at the back of the enclosure keeps the luminaire secure and keeps damage to a minimum. A + energy saving rating and an L70 LED lifetime of 20,000 hours, resulting in zero maintenance and low energy consumption for the lifetime of the product. Two Colour Temperatures The Pico is available as either Cool White or Warm White 4000K 90 O BEAM ANGLE COOL WHITE 390LM 2700K 90 O BEAM ANGLE WARM WHITE 350LM Circular Grille Eyelid 96mm Depth 96mm Depth 98mm Depth No Visible LED Spots A high quality frosted polycarbonate lens provides improved beam angle resulting in a smoother distribution of light. Screw Down Cable-Grip A built-in cable-grip saves time and ensures that no strain is placed on the terminal connections. Loop In & Out Terminals Diameter: Ø348.5mm Loop in and out terminals allow easier connection of multiple fittings. Double insulated and no Earth is required.

8 Inceptor Construction Pico FG LED Fire -Rat ated Mi nutes Heightened Spring Brackets Height of spring brackets has been increased to allow the product to be installed in ceiling thicknesses of 36mm. Cut-Out: 70-75mm Intumescent Band Moisture Seal Driver PCB A + energy saving rating and an L70 LED lifetime of 20,000 hours, resulting in zero maintenance, low energy consumption for the lifetime of the product. Integrated Driver. 30cm Fly Lead The pre attached fly lead provides easier installation for contractors. Two Colour Temperatures Pico FG is available as either Cool White or Warm White. Diffuser Constructed from high quality polycarbonate. The frosted front provides an improved beam angle and results in smoother distribution of light so no visible LED spots. Screw Down Cable-Grip A terminal cover with built-in cable-grip both saves time and ensures that no strain is placed on the terminal connections. SMD LED Technology Surface mounted LED have high reliability performance and utilise very little power, resulting in low energy consumption which offers a cost saving solution against that of traditional lamps. IP65 Bezels To complement existing installations of the original Pico the Pico FG uses the same Bezel and Lens so once installed they look identical, this also means the Pico FG achieves the same IP65 rating. 4000K 90 O BEAM ANGLE COOL WHITE 390LM 2700K 90 O BEAM ANGLE WARM WHITE 350LM Insulation Support Clip Available ISC1020

9 Universal Emergency Pack ACCESSORIES Compatible with Inceptor Downlights Converter Plates Fit Inceptor products into larger apertures! SP4120 An internal diameter of 65mm, SP4120 allows Inceptor Pico and Nano 5 fittings to be installed into ceiling cut outs of up to 120mm. Clip Feature The clip feature demonstrated above allows flexibility for easy installation. The articulated, robust design allows easy installation through a ceiling cut-out of 65mm diameter. SP3120 An internal diameter of 75mm, SP3120 allows Inceptor Omni, Nano 5 Adjustable and Pico FG fittings to be installed into ceiling cut outs of up to 120mm. Internal Diameter 65mm: SP4120CH SP4120SC SP4120WH Converter Plate Internal Diameter 75mm: SP3120CH SP3120SC SP3120WH Emergency Pack EMCGLED2305M3 Insulation Support Clip Fits Both Versions of Nano 5 and Pico FG Fast Fit Attachment The installer can attach and remove the Inceptor Insulation Support Clip quickly and easily as required before installation. Made from Polycarbonate, the Clip only requires an additional 20mm ceiling void depth to be fitted. Integrated Flow Connectors nect o A 4-Pole Flow Connector is used on the incoming side, this additional pole is a Permanent Live, which is used to charge the batteries while the switched Live can be used to turn the light on & off. The 3-Pole Flow Connector on the outgoing side is connected to the downlight as per normal. Status Indicator LED A charge Status Indicator LED with 750mm lead and bezel are supplied to provide clear indication that the unit is working correctly. 20mm of Extra Air-Space Creates 20mm of extra air space above the fitting, helping the driver to dissipate heat more effectively and reduce the operating temperatures of the light fitting by allowing air to circulate and cool. Insulation Support Clip Pack of 10: ISC Hours of Output Allows the Luminaire to remain illuminated at a reduced output for 3 hours in the event of power loss.

10 Simple Connectivity and Control CT300 THE TM 4 Pin (1 in, 3 out) Hub Junction Box SYSTEM The hub can be connected directly to another Hub. Works perfectly with the Inceptor range making wiring a lighting circuit easy. CT Way Box Connect up to 8 lights (16 using the CT350), or you can connect another CT1008 to the output at the end: Additional output allows interlinking or provides additional way. CT1016 :D\ &RQÀJXUDEOH %R[ Take control of up to 16 lights (24 using the CT350), with three different VZLWFKLQJ FRQÀJXUDWLRQV (DVLO\ DGG D VZLWFKHG OLYH LQWR D )ORZ FLUFXLW TM 1 x 16 way (1 way switching) 1 x 16 way (2 way switching) 2 x 8 way (1 way switching) Additional 8 ways available using CT350 splitter Additional way allows interlinking. CT350 Key Features of the Lighting Management Boxes: Suitable for loads up to 20A which means it can be used for more than just lighting 'XUDEOH DQG KHDY\ GXW\ ÀQLVK WR withstand all installation requirements Can be controlled or dimmed using suitable PIR sensors or mains dimmers $PSOH À[LQJ SRLQWV WR VXLW any method of installation Can incorporate wireless switching and dimming using Click Smart products IP20 rated. 4 Pin (1 in 2 out) Junction Box 7KLV VSOLWWHU KDV EHHQ VSHFLÀFDOO\ GHVLJQHG WR EH VOLP OLQH VR WKDW LW FDQ be used with the CT1016 & CT1008: Allows up to double the amount of ways Easy lock and release mechanism Versatile, easy-connection system. CT1300 Flow is Scolmore s quick-connect system designed to speed up installation and allow the quick and simple removal of the unit when carrying out routine maintenance, circuit testing or replacing components. This means testing procedures can be carried out quickly, accurately and effectively, with minimum disruption. The Flow connector offers loop-in and out facility with large terminals accepting up to 3 x 2.5mm2. Plug-in Switch Adapter Easily adds a switched live into a Flow circuit: Pre-wired with earth and neutral links 250V~20A plug-in connector Large terminals with easy access Terminal screws supplied raised Easy lock and release mechanism Versatile, easy-connection system.

11 THE FULL PRODUCT RANGE BZ4605SC BZ4605CH BZ4605WH Fixed Tri Colour Fire-rated LED Downlight Fixed Downlight: LED4600SC7D LED4600CH7D LED4600WH7D Integrated LED Utility Bulkhead- Circular Integrated LED Utility Bulkhead - Eyelid 10W Standard 10W Standard LED9500WH9 LED9505WH9 12W Emergency 12W Emergency LED9500WH93EM 12W Microwave Sensor LED9505WH93EM 12W Microwave Sensor Fixed Compact Fire-rated LED Downlight LED Downlight LED9500WH9MS 17W Microwave Sensor & Emergency LED9500WH9MS3EM LED9505WH9MS 17W Microwave Sensor & Emergency LED9505WH9MS3EM Warm White LED5400WH5WD LED5400CH5WD LED5400SC5WD Cool White LED5400WH5CD LED5400CH5CD LED5400SC5CD Warm White LED5405WH5WD LED5405CH5WD LED5405SC5WD Cool White LED5405WH5CD LED5405CH5CD LED5405SC5CD IP65 Fixed Integrated LED Downlight IP65 Fire Rated Fixed Integrated LED Downlight Circular Housing LED9001BK Eyelid Housing LED9002BK Grille Housing LED90003BK Warm White LED3500CH5WD LED3500SC5WD LED3500WH5WD Cool White LED3500CH5CD LED3500SC5CD LED3500WH5CD Warm White LED3600WH5WD LED3600CH5WD LED3600SC5WD Cool White LED3600WH5CD LED3600CH5CD LED3600SC5CD

12 Omni TECHNICAL SPECIFICATIONS Nano 5 TECHNICAL SPECIFICATIONS EFFICACY UP TO 83LM/W PART L Acoustic Air-Flow Moisture EFFICACY UP TO 81LM/W PART L Acoustic Air-Flow Moisture General Information /Non Inceptor Omni LED Colour Temperatures available 2700K (Warm) 4200K (Cool) 6500K (Daylight) Bezel Finishes Available Adjustable Bezels Available Material composition Cut Out Ceiling Thickness Ceiling Void depth Dimensions Height Warranty Registered: Weight Light Output Information White (WH), Chrome (CH) or Satin Chrome (SC) BZ4605CH (Chrome), BZ4605SC (Satin Chrome), BZ4605WH (White) Steel, Aluminium, ABS, Nylon & Polycarbonate 65-70mm (Fixed & Adjustable) 5-40mm 65mm+, 85mm+ (With Insulation Support Bracket) Height 65mm, 85mm (With Insulation Bracket), Diameter 85mm Registered: 5 Years. Unregistered: 2 Years 0.325Kg Output Wattage (approx) 5.6W CRI >80 LED Lifetime (L70) 25,000 hours Total Luminous Flux (Useful) 500lm (430lm) 580lm (480lm) 550lm (450lm) Beam Angle (Effective) 71 lm/w (61 lm/w) 83 lm/w (69 lm/w) 79 lm/w (64 lm/w) Power Factor 0.9 Driver Information Connection Pre-wired Flow TM Connector Input Output Vac / Rated 7W 160mA / 35V DC Switching Cycles 20,000 Critical Temperature 80 C Part L1 Compliancy (as of 2014) Part L2 Compliancy (as of 2014) Regulation Ratings Fire Rating Ingress Protection Rating Acoustic Rating Air Flow Yes Yes 30, 60 & 90 minute IP65 (Zone 1), IP54 With Adjustable Bezel 0dB (zero impact on sound insulation) BS 5250: 2011 compliant (0.06M 3 /hr) General Information Inceptor Nano 5 / Non LED Colour Temperatures available 2700K (Warm) 4000K (Cool) Bezel Finishes Available Material composition Cut Out Ceiling Thickness Ceiling Void depth Dimensions Height (Fixed) Dimensions Height (Adjustable) Standard Warranty: Weight Light Output Information White (WH), Chrome (CH) or Satin Chrome (SC) Steel, Aluminium, ABS, Nylon & Polycarbonate 60mm Fixed 75mm Adjustable 5-40mm 45mm+, 54mm (Adjustable) Height 50mm, Diameter 80mm, 30cm Fly-lead Height 54mm, Diameter 90mm, 20 Adjustable Angle, 30cm Fly-lead 2 Years 0.208Kg (Fixed) 0.284Kg (Adjustable) Output Wattage (approx) 3.8W CRI >80 LED Lifetime (L70) 25,000 hours Total Luminous Flux 400lm 450lm Beam Angle lm/w 81 lm/w Power Factor 0.8 Driver Information Connection Pre-wired Flow TM Connector Input Output Vac / Rated 4.8WMAX 75mA / 50V DC Switching Cycles 20,000 Critical Temperature 80 C Part L1 Compliancy (as of 2014) Part L2 Compliancy (as of 2014) Regulation Ratings Fire Rating Ingress Protection Rating Acoustic Rating Air Flow Yes Yes 30, 60 & 90 minute IP65 zone 1 (Fixed), IP54 (Adjustable) 0dB (zero impact on sound insulation) BS 5250: 2011 compliant (0.06M 3 /hr) IEC TR 62778: 2014 EN 62493: 2010 EN 55015: 2013 EN 61547: 2009 EN : 2014 EN : 2013 EN : 2015 EN : /35/EU Fire, Acoustic & Airflow: BS 476: Part 21: 1987 EN : 2014 BS EN ISO : 2010 BS EN ISO : 2010+A1: 2015 BS 5250: 2011 Complies with Part B, P, E, C, L Acoustic tested to BS EN ISO : 2010 & BS EN ISO : 2010+A1: 2015 whilst satisfying Robust Details Appendix F requirements Air-flow tested to BS 5250: 2011 Fire rated in accordance with EN : 2014, BS 476: Part 21: 1987 IEC TR 62778: 2014 EN 62493: 2010 EN 55015: 2013 EN 61547: 2009 EN : 2014 EN : 2013 EN : 2015 EN : /35/EU Fire, Acoustic & Airflow: BS 476: Part 21: 1987 EN : 2014 BS EN ISO : 2010 BS EN ISO : 2010+A1: 2015 BS 5250: 2011 Complies with Part B, P, E, C, L Acoustic tested to BS EN ISO : 2010 & BS EN ISO : 2010+A1: 2015 whilst satisfying Robust Details Appendix F requirements Air-flow tested to BS 5250: 2011 Fire rated in accordance with EN : 2014, BS 476: Part 21: 1987

13 Pico TECHNICAL SPECIFICATIONS Pico FG TECHNICAL SPECIFICATIONS 65-75mm (cut-out) EFFICACY UP TO 70LM/W PART L Air-Flow Moisture EFFICACY UP TO 70LM/W PART L Acoustic Air-Flow Moisture 47mm 83mm General Information Inceptor Pico /Non- Bezel Finishes Available Chrome, Satin Chrome and White LED Colour Temperatures available 2700K (Warm) 4000K (Cool) Luminous Flux (typ) 350Lm 390Lm 63Lm/W 70Lm/W LED quantity 5 RA (min) >80 SDCM Lifetime (L70) 20,000 Safety Class Class II IP Rating IP65 Cut-Out 65mm - 75mm Ceiling Thickness 5mm-25mm Height 47mm Beam Angle 90 Driver Information Input Voltage V~ Input Current 32mA Input Frequency 50/60Hz Input Wattage 5.5W Power Factor 0.8 Output Voltage 45Vdc Output Current 100mA Tc (surface Temp) 80 C Ta (ambient max) 40 C General Information Inceptor Pico FG /Non- LED Type V-1W Bezel Finishes Available Chrome, Satin Chrome and White LED Colour Temperatures available 2700K (Warm) 4000K (Cool) Luminous Flux (typ) 350Lm 390Lm Luminous Flux (min) 351Lm 351Lm Useful Luminous Flux 230Lm 260Lm 63Lm/W 70Lm/W LED quantity 5 RA (min) >80 SDCM Lifetime (L70) 20,000 Safety Class Class II IP Rating IP65 Cut-Out 70mm - 75mm Ceiling Thickness 5mm-36mm Height 52mm Ceiling Void Depth >50mm Beam Angle 90 Driver Information Input Voltage V~ Input Current 32mA Input Frequency 50/60Hz Input Wattage 5.5W Power Factor 0.8 Output Voltage 45Vdc Output Current 100mA 82% Tc (surface Temp) 80 C Ta (ambient max) 40 C 2014/35/EU EN :2015 EN :2012 EN :2014 EN 62471:2008 EN 55015:2013+A1:2015 EN 61547:2009 EN :2014 EN :2013 EN 62493:2010 EN : 2014 EN : 2012 IEC : 2014 BS EN 60529: 1992+A2: /35/EU Fire, Acoustic & Airflow: BS 476: Part 21: 1987 EN : 2014 BS EN ISO : 2010 BS EN ISO : 2010+A1: 2015 BS 5250: 2011 Complies with Part B, P, E, C, L Acoustic tested to BS EN ISO : 2010 & BS EN ISO : 2010+A1: 2015 whilst satisfying Robust Details Appendix F requirements Air-flow tested to BS 5250: 2011 Fire rated in accordance with EN : 2014, BS 476: Part 21: 1987

14 Evo TECHNICAL SPECIFICATIONS Accessories TECHNICAL SPECIFICATIONS EFFICACY UP TO 121LM/W PART L Acoustic Air-Flow Moisture 180º 68mm 270mm 42mm 38mm 515mm 30mm 27mm 60mm Input Parameters Standard Emergency Microwave Sensor Emergency & Microwave Input Voltage 230V 230V 230V 230V Input Current 0.063A 0.090A 0.095A 0.133A Input Wattage Total Power: 10W Total Power: 12W Total Power: 12W Total Power: 17W Input Frequency 50Hz~60Hz 50Hz~60Hz 50Hz~60Hz 50Hz~60Hz Output Parameters No. of LED s 150 PCS 170 PCS 150 PCS 170 PCS Colour Temperature 4200K 4200K 4200K 4200K CRI lm/W 100.8lm/W 100.8lm/W 80.6lm/W LED Power 9W 9W 9W 9W Lumen Output (Mains) Lumen Output (Emergency) Without Diffuser (lm): 1790lm With Diffuser (lm): 1210lm 2m Without Diffuser (lux): 81lux 2m With Diffuser (lux): 56lux N/A Without Diffuser (lm): 1790lm With Diffuser (lm): 1210lm 2m Without Diffuser (lux): 81lux 2m With Diffuser (lux): 56lux Without Diffuser (lm): 494lm With Diffuser (lm): 349lm 2m Without Diffuser (lux): 38lux 2m With Diffuser (lux): 27lux Without Diffuser (lm): 1790lm With Diffuser (lm): 1210lm 2m Without Diffuser (lux): 81lux 2m With Diffuser (lux): 56lux N/A Without Diffuser (lm): 2080lm With Diffuser (lm): 1370lm 2m Without Diffuser (lux): 96lux 2m With Diffuser (lux): 75lux Without Diffuser (lm): 494lm With Diffuser (lm): 349lm 2m Without Diffuser (lux): 38lux 2m With Diffuser (lux): 27lux Light Beam Angle Area of Diffuser 490m² 490m² 490m² 490m² Warranty 3 Years 3 Years 3 Years 3 Years Operating Temperature C C C C Weight 1.43 kg 1.48 kg 1.78 kg 1.83 kg Fixture Parameters Fixture Class II II II II Mode of Mounting Ceiling Mount, Wall Mount Ceiling Mount, Wall Mount Ceiling Mount, Wall Mount Ceiling Mount, Wall Mount IP Rating IP65 IP65 IP65 IP65 UV Stabilised Yes Yes Yes Yes 2014/35/EU EN :2015 EN :2008+A2:2013 EN :2014 EN : 1989 EN : 2014 BS EN : 2014 BS EN : 2012 BS EN :2004+A2:2010 BS EN 62133: 2013 EN 55015:2013+A1:2015 EN :2014 EN :2013 EN 61547:2009 R&TTE General Information Mains Universal Remote 9 Cell 3 Hour Emergency Pack 2.2A Input: 4 Pole Male Connector (CT203M) pre-wired, 4 Pole Female Connector (CT203F) supplied Connection Output: 3 Pole Female Connector (CT101F) pre-wired Mains Voltage 230V~ 50/60Hz Power Consumption 4Va Input Current 25mA Max Charge Current mA Output Voltage V Output Current 50mA Output Power 5.2W Open Circuit Voltage 260V LED Voltage Range 9-200V Earth Leakage Current <0.5mA Ambient Temperature +5C - +40C 3HR Duration NiMH 10.8V 2.2Ah Charging Time 48 Hours Status Indicator Green LED (750mm leads and bezel supplied) Degree of Protection IP20 Maintained / Non Maintained Offers the facility to be wired as Maintained or Non-Maintained Compatible Products Nano 5, Nano 5 Adjustable, Omni, Pico FG, FlameGuard / Ovia GU10 LED Lamps EN : 2014, EN 61547: 2009 IEC : 2011, EN 55015: A1: 2015 General Information Converter Plate Product Code SP3120 SP4120 Finishes Available (Polished Chrome), SC (Satin Chrome) or WH (White) Material Composition Pressed Stainless Steel Plate Finish (White) Powder Coated Plate Finish (Chrome / Satin Chrome) Plated Max Hole Coverage 120mm Compatible Downlights General Information Product Code Additional Ceiling Void Depth Required Compatible Downlights Additional Information Omni, Nano 5 Adjustable, Pico FG Insulation Support Bracket ISC mm Nano 5, Nano 5 Adjustable, Pico FG Halogen Free Flame retardant to UL94-V2 Nano 5, Pico

15 United Kingdom Southern Ireland Scolmore Park, Landsberg, Tamworth, Staffordshire B79 7XB United Kingdom T: +44 (0) F: +44 (0) E: 18 Corrig Road, Sandyford, Dublin D18 WV79 Ireland T: +353 (1) F: +353 (1) E: MAR2044