LEDVANCE SUPERSTAR LED Downlight Gen 2

Transcription

1 DATA SHEET LEDVANCE SUPERSTAR LED Downlight Gen 2 Bright, robust and durable Integrated electronic control gear for direct power connection Downlight suitable for suspended as well as concrete ceilings Compatible with ceiling standard 90mm cut out Product Features & Benefits Direct connection to AC power supply thanks to integrated control gear Plug & play flex & plug included Replacement for halogen downlights. Energy saving up to 80% compared with 50W halogen lamps IP44 splash proof ideal for bathrooms IC-4 insulation rating can be covered be thermal insulation Available in 3 different colour temperatures: 3000K, 4000K & 5000K Best in class colour consistency: SDCM 5, superior quality LED chips Colour rendering: >80 Uniform illumination Long lifetime: up to 40,000 h (L70/B50) Mercury-free and RoHS compliant High power factor: PF >0.9 Dimmable with leading and trailing edge dimmers (see page 7 for compatible dimmers)

2 Product Features & Benefits (cont.) Robust and durable construction with aluminium heat sink and insert moulded PBT for optimal heat dissipation High efficacy up to 112.5lm/W High light output up to 900 lumens Wide 100 beam angle for uniform illumination Clean matt-white finish Brushed chrome trim available as an accessory (sold separately) Applications: Living areas Offices Bathrooms Corridors Entrances Foyers Stairwells Elevators Secondary rooms

3 General Specifications LEDVANCE SUPERSTAR LED Downlight Gen 2 Electrical Data Optical / Photometric Housing Wattage (W) 8 Voltage range Line frequency V AC 50/60Hz Power factor >0.9 Input current (max) Dimming Protection class Rated lumens CCT (K) 110mA Yes Class II 800lm(3000K)/ 850lm(4000K)/ 900lm(5000K) 3000K/ 4000K/ 5000K CRI >80 Color tolerance Rated lifetime Ambient temperature Ta Storage temperature Ts Case temperature max. Tc Cut out dimension Dimensions (diameter) Height Trim accessory material Ingress protection Mounting 5 SDCM 40,000 L70 (Ta=25 ) C C <90 C Φ92mm Φ115mm 61mm Stainless steel IP44 (exposed part), IP20 (back of downlight) Recessed mount

4 Ordering guide Model number Shipper box Shipper box Product description GTIN-13 configuration (EAN40) LDV-SSDL-8W-830 LED SS D/L WT 8W/ V KIT 12X1 LEDV 12 x single pack LDV-SSDL-8W-840 LED SS D/L WT 8W/ V KIT 12X1 LEDV 12 x single pack LDV-SSDL-8W-850 LED SS D/L WT 8W/ V KIT 12X1 LEDV 12 x single pack LDV-SSDL-8W-830 LED SS D/L WT 8W/ V KIT 6X4 LEDV 6 x 4 pack LDV-SSDL-8W-840 LED SS D/L WT 8W/ V KIT 6X4 LEDV 6 x 4 pack LDV-SSDL-8W-850 LED SS D/L WT 8W/ V KIT 6X4 LEDV 6 x 4 pack Polar intensity diagram:

5 Drawing/Dimensions: Diameter Cutout Height Weight Φ115mm Φ92mm 61mm 230g Trim accessory Diameter Height 1 Height 2 Weight Trim accessory Φ116mm 2.5mm 8.5mm 19g Accessory Trim accessory Description Shipping quantity IC GTIN-13, EAN10 EAN40 TRIM SS D/L SATIN CHROME 24X1 LEDV 24pcs AC

6 Installation instructions Please read the installation instructions supplied with the product in full before commencing installation of this product. WARNING: This product must be installed by a licensed electrician strictly in accordance with current revision of AS/NZS 3000 Electrical Installations (Australian/New Zealand Wiring Rules). If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. Insulation Rating IC-4: The LEDVANCE SUPERSTAR LED Downlight G2 has been tested in accordance with AS/NZS :2016, for an insulation classification of IC-4. IC-4 recessed luminaires can be abutted and covered by normally flammable materials including fixed building insulation (refer to figure 1 below). The temperature of the fitting does not exceed 90 C when building insulation abuts or covers the luminaire. Warning: This luminaire is not suitable for use with loose-fill insulation. 1. Disconnect mains power before assembly. 2. Cut a 92mm hole in the ceiling. 3. Insert the plug into a surface socket or hard wire the downlight depending on the installation requirements. 4. Push back the retaining clips and insert downlight into ceiling. Push back the retaining clips and insert downlight into ceiling.

7 Dimmer compatibility LEDVANCE has conducted compatibility testing on the following commercially available dimmers, as per table below. The downlights are design to operate on both leading and trailing edge phase dimmers, but for best performance, trailing edge or LED optimised dimmers are generally recommended. Compatibility performance with dimmer * Connect with up to 4 luminaires Brand Model Load Range [W] Type Dimming range (%) Flickering at low dim values 1 Sylvania Dimpala TM PEDIGREE 400 T 93.64% No 2 CLIPSAL R 32E450UDM 450 T 80.91% No 3 CLIPSAL R 32E450TM 450 T 82.73% No 4 CLIPSAL R 32E450LM 450 L 85.45% No 5 Legrand R Cat 400T 400 T 80.00% No 6 LUMEX R LT1D450LS SERIES 450 T 87.27% No 7 DIGINET LED SMART 400 T 92.73% No 8 CLIPSAL R 32ELEDM 400 T 85.45% No 9 SAL SDA T 83.64% No 10 ATOM AT9300/A 200 T 80.00% No 11 Legrand R Cat 400L 400 L 80.91% No Remarks: L Leading edge dimmer, T Trailing edge dimmer * Typical values. The test results reflect the measurement of the individual devices that were used in tests. LEDVANCE does not take over any responsibility, warranty or liability that this results can also be achieved by using the devices under other conditions or when using successor models of the tested devices or different models of the same manufacturer. The test results were achieved by using the above mentioned luminaires only. LEDVANCE does not take over any responsibility, warranty or liability that this results can also be achieved by using the devices under other conditions or when using other luminaires or lamp types. LED luminaires contain several electronic components. Under unfavorable conditions these can lead to acoustic noise. In case of resonance even low noise can cause audible effect. Possible factors influencing this are the installation as well as the dimmer or the transformer (harmonics or electronic resonance). LEDVANCE Pty Ltd PO Box 645 North Ryde BC NSW 2113 Ph: sales.au@ledvance.com