Mono-Control Venetian Blind (UMC), Auto-Descending Venetian Blind (UTC) Slat Color Options by Model

Size: px
Start display at page:

Download "Mono-Control Venetian Blind (UMC), Auto-Descending Venetian Blind (UTC) Slat Color Options by Model"

Transcription

1 Mono-Control Venetian Blind (UMC), Auto-Descending Venetian Blind (UTC) Slat Color Options by Model Mono-Control Venetian Blind (UMC) Auto-Descending Venetian Blind (UMC) 25 mm slat 35 mm slat 50 mm slat Air Tight Model 50 mm slat 25 mm slat 35 mm slat Solid Color Two-Tone Color Heat Shield Slat: Solid Color Heat Shield Slat: Two-Tone Color TiO2 Coated Heat Shield Slat Fluoride-coated Heat Shield Slat TiO2 Coated Slat Punch Dot Pattern Slat *TiO2 coated slats for the UMC 25 model are offered in 14 color options marked with indicated in the color chart. *Slats for the UMC 50 and UMC 50 Air Tight models are offered in 7 color options marked with indicated in the color chart. *TiO2 coated slats for the UTC 25 model are offered in 14 color options marked with indicated in the color chart.

2 Solid Color: 38 variations 7 colors marked with *Slats for the UMC 50 and UMC 50 Air Tight models are offered in 7 color options marked with. Two-Tone Color: 4 variations Convex : C011 Concave : C042 Convex : C042 Concave : C011 Convex : C043 Concave : C011 Convex : C011 Concave : C043 Convex face Concave face For two-toned heat shield slats, the head rail and bottom rail come in the same color or the same tone with the concave face of the slats. (This may not apply to some models.)

3 Heat Shield Slat: 42 variations 6 colors marked with *Slats for the UMC 50 and UMC 50 Air Tight models are offered in 6 color options marked with. Heat Shield Solid Color: 37 variations Heat Shield Color: 1 variations As the coating is designed to retain the color of the aluminum base, the actual color may not exactly be the same as that shown left, depending on individual products. - Application of heat shield coating is limited to slat faces. - Heat shield slats come in the same hue as used in the solid color variation. However, impressions provided may differ due to the effects from coating.

4 Heat Shield Two-Tone Color: 4 variations Convex : C059S Concave : C063 Convex : C063 Concave : C059S Convex : C059S Concave : C407S Convex : C407S Concave : C059S Convex face Concave face For two-toned heat shield slats, the head rail and bottom rail come in the same color or the same tone with the concave face of the slats. (This may not apply to some models.)

5 TiO2-coated heat shield slats: 15 variations As the coating is designed to retain the color of the aluminum base, the actual color may not exactly be the same as that shown left, depending on individual products. - Application of TiO2 coating and heat shield coating is limited to slat faces. - TiO2 coat may cause perceptible light interference (rainbow hues) in some locations of the slat faces. - TiO2 -coated heat shield slats come in the same hue as used in the solid color variation. However, impressions provided may differ due to the effects from coating. Fluoride-coated heat shield slats: 15 variations As the coating is designed to retain the color of the aluminum base, the actual color may not exactly be the same as that shown left, depending on individual products. - Application of fluoride coating and heat shield coating is limited to slat faces. - Fluoride-coated heat shield slats come in the same hue as used in the solid color variation. However, impressions provided may differ due to the effects from coating.

6 TiO2 coated slats: 25 variations *Slats for the UMC 25 are offered in 14 color options marked with. - Application of TiO2 coating is limited to slat faces. - TiO2 coat may cause perceptible light interference (rainbow hues) in some locations of the slat faces. - TiO2 coated slats have the property of becoming a ttracted to each other when wet. Please note this when using in kitchens, bathrooms and other places in which water is frequently used. Punch Dot Pattern: 8 variations

CUSTOM VENTILATED AWNINGS

CUSTOM VENTILATED AWNINGS CUSTOM VENTILATED AWNINGS FASHION AWNINGS offer you a variety of styles. They are priced differently, they are designed differently both from appearance and from the purpose for which they are to be used.

More information

MAXPRO200 Instruction Manual Revision 2 99 Estimated kerf-width compensation The kerf widths in the following charts are for reference. Differe

MAXPRO200 Instruction Manual Revision 2 99 Estimated kerf-width compensation The kerf widths in the following charts are for reference. Differe Hypertherm Dross Low-speed dross forms when the torch s cutting speed is too slow and the arc shoots ahead. It forms as a heavy, bubbly deposit at the bottom of the cut and can be removed easily. Increase

More information

Fully Automatic Slat Cutting Punching and Threading Machine

Fully Automatic Slat Cutting Punching and Threading Machine OPL 300 Fully Automatic Slat Cutting Punching and Threading Machine Fully Automatic, High speed, Slat cutting, Punching and Threading machine for Venetian Blind production. 1 OPL 300 FEATURES Easy setting

More information

F8/FB8 Series Ball Valves IOM-F8/FB8

F8/FB8 Series Ball Valves IOM-F8/FB8 !!!CAUTION! Safety Precautions!!! Before removing valve from pipeline NOTE that: Media flowing through a valve may be corrosive, toxic, flammable, or a contaminant of harmful nature. Where there is evidence

More information

Blinds and accessories

Blinds and accessories Blinds and accessories Complete light control VELUX blinds give you so many options you can choose between darkening, diffusing, or adjusting the light that enters the room. There are so many reasons for

More information

Pipe Flaring Tool Kit (for on-car use)

Pipe Flaring Tool Kit (for on-car use) 4850 Pipe Flaring Tool Kit (for on-car use) www.lasertools.co.uk Introduction Flaring Tool Kit Components 4850 Brake Pipe Flaring Tool Kit (for on-car use) 1: De-burr tool 2: Hydraulic ram 7 2 5 Designed

More information

INSTRUCTIONS 360 Y-DROP

INSTRUCTIONS 360 Y-DROP INSTRUCTIONS 60 Y-DROP INSTRUCTIONS 60 Y-DROP INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The 60 Y-DROP unit should be precisely

More information

INSTALLATION MANUAL PACK RAT DRAWER UNITS MODELS NOTICE DANGER WARNING CAUTION

INSTALLATION MANUAL PACK RAT DRAWER UNITS MODELS NOTICE DANGER WARNING CAUTION TRUCK STORAGE SOLUTIONS SECURING YOUR REPUTATION INSTALLATION MANUAL ALUMINUM STEEL & ALUMINUM & STEEL SIDE ALL WITH PURPOSE CHEST PACK RAT DRAWER UNITS MODELS ATTENTION: PLEASE READ AND UNDERSTAND ALL

More information

INSTRUCTIONS 360 Y-DROP

INSTRUCTIONS 360 Y-DROP INSTRUCTIONS 60 Y-DROP 60 Y-DROP REGISTRATION Please visit productregistration.60yieldcenter.com to complete the product registration for your 60 Y-DROP so we can better support our products from day one

More information

WELD PLATE GAUGE TOOL INSTRUCTIONS

WELD PLATE GAUGE TOOL INSTRUCTIONS WELD PLATE GAUGE TOOL INSTRUCTIONS Introduction The weld plate gauge tool has been developed in order to verify that upon reception and installation of the weld plate they are within acceptable tolerance.

More information

Your Steering Column Specialist

Your Steering Column Specialist Cable Shift Installation Instructions for: GM Column to GM Transmission GM Steering Column to: 350 Trans...Pg1 400 Trans...Pg5 700R4 & 4L60 Series Trans...Pg9 www.ididitinc.com ididit is... Your Steering

More information

Soltec Sliding and Folding Panels Sun protection with added value

Soltec Sliding and Folding Panels Sun protection with added value Soltec Sliding and Folding Panels Sun protection with added value Index page Soltec Sliding and Folding Panels 4, 5 Sliding Panels 6, 7 A41 Horizontal Folding Panels 8, 9 W63 Horizontal Folding Panels

More information

IOM-CleanFLOW TM. CleanFLOW Series Ball Valves. SV F Flow Controls I N C O R P O R A T E D

IOM-CleanFLOW TM. CleanFLOW Series Ball Valves. SV F Flow Controls I N C O R P O R A T E D !!!CAUTION! Safety Precautions!!! Before removing valve from pipeline NOTE that: Media flowing through a valve may be corrosive, toxic, flammable, a contaminant or harmful nature. Where there is evidence

More information

DESIGNER SERIES HINGED GLASS PANEL, GRILLE, BLIND AND SHADE INSTRUCTIONS

DESIGNER SERIES HINGED GLASS PANEL, GRILLE, BLIND AND SHADE INSTRUCTIONS 2016 Pella Corporation Part Number: 80ML0106 INSTRUCTION INSTRUCCIONES DE INSTALACIÓN DESIGNER SERIES HINGED GLASS PANEL, GRILLE, BLIND AND SHADE INSTRUCTIONS CAUTION: DO NOT remove or cut the white cord

More information

Read Chapter 8 Servicing Machine in the Manual for general guidelines

Read Chapter 8 Servicing Machine in the Manual for general guidelines Page 1 of 6 Read Chapter 8 Servicing Machine in the Manual for general guidelines The PlasmaCAM will not work on a GFI circuit. Earth ground the grates of the PlasmaCAM. Computer Configuration A. PlasmaCAM

More information

INSTALLATION INSTRUCTIONS UNIVERSAL HEADACHE RACK

INSTALLATION INSTRUCTIONS UNIVERSAL HEADACHE RACK INSTALLATION INSTRUCTIONS UNIVERSAL HEADACHE RACK PARTS LIST: 1 Headache Rack 2 Special 10mm "J" Bolts 1 Driver Mounting Base 6 10-1.5mm x 40mm Hex Bolts 1 Passenger Mounting Base 6 10mm x 34mm OD x 3mm

More information

External venetian blinds with interlocking slats E 73/93/90 A6, C 73/93/90 A6, E 90 A5, C 90 A5 Description

External venetian blinds with interlocking slats E 73/93/90 A6, C 73/93/90 A6, E 90 A5, C 90 A5 Description 2 3 1 Application For mounting on mullion/transom facades or conservatories, in the soffit or in ventilated facades, in double skin facades, in front of the facade as well as indoors. 4 5.1 7 5.2 6 Operation

More information

Disassembly Instructions hp. Dynafile II Models: 40352, 40353

Disassembly Instructions hp. Dynafile II Models: 40352, 40353 Disassembly Instructions - 0.4 hp. Dynafile II Models: 40352, 40353 Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever

More information

on the move guide

on the move guide on the move guide House Cleaning 14 house cleaning Allied Pickfords can arrange to have your old and new home professionally cleaned. Whether you use the general housecleaning service for a

More information

The VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications

The VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications The VATORC 50-SN Series 3/4/5-Way Sanitary Ball Valve The 50-SN is a true multi-way Ball valve with balanced seat construction. Porting and shut-off capabilities can reduce the number of process valves

More information

4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip

4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip 4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip Art # A-04203 Electrode Start Cartridge Tip Shield Cup Body Shield Cap, Deflector 9-8215 9-8213 9-8237 9-8243 Torch: SL100 with Exposed

More information

Installation Instructions for SINGLE COLOR 12V or 24V LINEAR LED

Installation Instructions for SINGLE COLOR 12V or 24V LINEAR LED Installation Instructions for SINGLE COLOR 12V or 24V LINEAR LED LLI-L1.5W (T300) LLI-L2.2W (TSHL2835-300) LLI-L2.5W (TSHL2835-600-2.5W) LLI-3.5W (TSHL2835-480) LLI-L4.4W (TSHL2835-600) LLI-L5.9W (TUB5630-560)

More information

Storm Doors. overview

Storm Doors. overview Storm Doors overview Pella s distinctive storm doors are designed to suit your personal tastes and complement your entryway. Each storm door is built from heavyduty materials that provide smooth, dependable

More information

Disassembly Instructions hp. Mini-Dynafile II

Disassembly Instructions hp. Mini-Dynafile II Disassembly Instructions - 0.4 hp. Mini-Dynafile II Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever to deplete the

More information

TL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information

TL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information Flat Inductive Standard Flat s in Many Different Variations Only 6 mm thick yet provides a sensing distance of mm (MC1). Aluminum die-cast models also available. Be sure to read Safety Precautions on page

More information

REVELATION / NAOS Model

REVELATION / NAOS Model REVELATION / NAOS Model The NAOS model, in its various arrangements, is available in swing and sliding versions, with matching pedestrian gates and railings. Minimum gate height 1,60 m. Large boards of

More information

CLiP 4X EXTERIOR IP67 LINEAR LED ACCENT LIGHTING, LOW-POWER

CLiP 4X EXTERIOR IP67 LINEAR LED ACCENT LIGHTING, LOW-POWER PROJECT: TYPE: CLiP 4X RIGID MOUNTING TRACK PROGRESS R e p o r t Selection APPLICATION The CLiP 4X exterior 24V linear LED lighting produces uniform illumination designed to accent and highlight spaces

More information

05/06 Gsxr 1000 Clutch Mod

05/06 Gsxr 1000 Clutch Mod By: Ali (Jetspeedz) 05/06 Gsxr 1000 Clutch Mod Parts: 21472-41G10 - WASHER, CLUTCH - $10.09 From 06 Gsxr 750 Opt: 11482-40F00 - GASKET, CL COVER - $8.29 Tools: 13/64 Drill bit, 30mm, 12mm, 10mm, 8mm sockets,

More information

C4S SERPENTINE LED LINEAR COVE LIGHTING, MID-POWER

C4S SERPENTINE LED LINEAR COVE LIGHTING, MID-POWER PROJECT: TYPE: APPLICATION LED linear lighting produces uniform illumination designed to accent and highlight spaces featuring curves and corners, such as coves and soffits. The 6 articulating modules

More information

V-HID Headlight Installation Instructions

V-HID Headlight Installation Instructions V-HID Headlight Installation Instructions Thank you for purchasing our New high quality easy to install Parts4PowerToys V-HID headlight kit for your Harley Davidson. The following installation instructions

More information

Blinds and accessories

Blinds and accessories Blinds and accessories Complete light control Choose a blind type VELUX offers many light control options for new or previously installed skylights. Choose between these blind options: Blackout, room darkening

More information

CLEAVELAND / PRICE INC. Type RL-C Side Break Switch kv A. Bulletin DB-104E12

CLEAVELAND / PRICE INC. Type RL-C Side Break Switch kv A. Bulletin DB-104E12 Bulletin DB-104E12 Type RL-C Side Break Switch 7.2-69 kv 600-2000 A. CLEAVELAND / PRICE INC. 14000 Rt. 993, Trafford, PA 15085 (724) 864-4177 FAX (724) 864-9040 Email: sales@cleavelandprice.com Type RL-C

More information

INSTRUCTIONS 360 Y-DROP

INSTRUCTIONS 360 Y-DROP INSTRUCTIONS 60 Y-DROP INSTRUCTIONS 60 Y-DROP RECOMMENDED TOOLS Ratchet wrench with /" and 9/6" deep well sockets /8" -point socket /" and 9/6" combination wrenches Impact driver # Philips screwdriver

More information

Wheel Arch Trim Set. Installation Manual. This section covers installation of the wheel arch trim set.

Wheel Arch Trim Set. Installation Manual. This section covers installation of the wheel arch trim set. Wheel Arch Trim Set FORESTER Wheel Arch Trim Set EN PART # E20SSG000 This section covers installation of the wheel arch trim set. Installation Manual Note: Before performing installation, be sure to read

More information

ASSEMBLY INSTRUCTIONS FOR DYNALITE DRAG RACE FRONT HUB KIT WITH DIAMETER SOLID ROTOR PINTO / MUSTANG II

ASSEMBLY INSTRUCTIONS FOR DYNALITE DRAG RACE FRONT HUB KIT WITH DIAMETER SOLID ROTOR PINTO / MUSTANG II ASSEMBLY INSTRUCTIONS FOR DYNALITE DRAG RACE FRONT HUB KIT WITH 0.75 DIAMETER SOLID ROTOR 97-978 PINTO / MUSTANG II (FIVE LUG CONFIGURATION ONLY)* PART NUMBER GROUP 0-03-B DISC BRAKES SHOULD ONLY BE INSTALLED

More information

740G Double Disc Check. Valve. Operation / Maintenance Manual. General Information 2. Installation/Operation 3

740G Double Disc Check. Valve. Operation / Maintenance Manual. General Information 2. Installation/Operation 3 Operation / Maintenance Manual 740G Double Disc Check table of contents PAGE General Information 2 Installation/Operation 3 Troubleshooting & Disassembly/Reassembly 4 Parts Information 5 Valve! WARNING:

More information

INSTALLATION INSTRUCTIONS RECESSED EXTRUSIONS WITH LED TAPE

INSTALLATION INSTRUCTIONS RECESSED EXTRUSIONS WITH LED TAPE LLI-XR-CRV LLI-XR-ELF LLI-XR-IFL LLI-XR-IGR LLI-XR-SQF LLI-XR-THF **DANGER: Prior to installation, disconnect power at the source.** Make sure you have all components listed below: LED tape 24VDC Power

More information

INSTALLATION INSTRUCTIONS SURFACE EXTRUSIONS WITH LED TAPE

INSTALLATION INSTRUCTIONS SURFACE EXTRUSIONS WITH LED TAPE LLI-XS-30D LLI-XS-60D LLI-XS-90D LLI-XS-ANG LLI-XS-AUR LLI-XS-DEP LLI-XS-DOM LLI-XS-ELT LLI-XS-FLX LLI-XS-GEN LLI-XS-GZR LLI-XS-ICN LLI-XS-SQR LLI-XS-THN LLI-XS-WID LLI-XS-ZEN **DANGER: Prior to installation,

More information

Watch thevideo! dead end pressures that can result in serious or fatal injuries if blocked.

Watch thevideo! dead end pressures that can result in serious or fatal injuries if blocked. MOBILE VIEW Guns Guns use engineered air nozzles for high performance! Guns Why EXAIR Guns? Inexpensive air guns are sold through many catalogs and industrial supply companies. Most have triggers or other

More information

Introduction. Rocky Mountain Westy Subaru Conversion Airbox Installation Instructions

Introduction. Rocky Mountain Westy Subaru Conversion Airbox Installation Instructions Rocky Mountain Westy Subaru Conversion Airbox Installation Instructions Introduction Thank you for purchasing the Rocky Mountain Westy Subaru Conversion Airbox. We pride ourselves in the products we develop

More information

1 Safety instructions. 2 Device components. Blinds Management Motor control insert Universal AC 230 V ~ Art. No. 232 ME. Operating instructions

1 Safety instructions. 2 Device components. Blinds Management Motor control insert Universal AC 230 V ~ Art. No. 232 ME. Operating instructions Art. No. 232 ME Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Serious injuries, fire or property damage possible. Please

More information

DIAGNOSING AND REPAIRING TOP END NOISE IN VE30DE ENGINES

DIAGNOSING AND REPAIRING TOP END NOISE IN VE30DE ENGINES Classification: Reference: Date: EM93-005 NTB93-189 December 21, 1993 DIAGNOSING AND REPAIRING TOP END NOISE IN VE30DE ENGINES APPLIED VEHICLE(S): 1992-93 Maxima SE SERVICE INFORMATION Some VE30DE engines

More information

The TeleControl Series Technical Drawings

The TeleControl Series Technical Drawings The TeleControl Series Technical Drawings TeleControl TeleControl Enclosures Dimensions SIZE ID NUMBER OVERALL H X W X D INSIDE A X B X C E X F J K L M N HOLE DIA. SHIPPING WEIGHT PANEL NUMBER J1407TC

More information

Push-Pull Slide Gate - Series E

Push-Pull Slide Gate - Series E Push-Pull Slide Gate - Series E For Gravity Flow Applications and Vacuum LSP Flanged Top View Available in sizes 2" to 12" Side View Bolt Thru Pipe Flange Connection Top View Stainless steel material contact

More information

Hillside Cultivator Co. LLC Operators Manual. Model NH

Hillside Cultivator Co. LLC Operators Manual. Model NH Hillside Cultivator Co. LLC Operators Manual Model NH Table of Contents Page Safety 3 Unpacking a Shipped Cultivator 4 Cultivator Parts and Description 6 Using Rolling Spider Cultivators 7 Adjustments

More information

Model ES-660-HF High Flow Spring-Loaded Hatch

Model ES-660-HF High Flow Spring-Loaded Hatch Instruction Manual Model ES-660-HF February 2015 Model ES-660-HF High Flow Spring-Loaded Hatch Table of Contents Introduction...1 Specifications...2 Principle of Operation...2 Tagging Information...2 Installation

More information

3 Year Warranty. heavy duty Wiper systems. Heavy Duty Motor NEW!!! AFI 2.5 Wiper Motor Waterproof Wiper Motor. AFI Ph:

3 Year Warranty. heavy duty Wiper systems. Heavy Duty Motor NEW!!! AFI 2.5 Wiper Motor Waterproof Wiper Motor. AFI Ph: .53 (13.5mm) D = 3.02 (76.8mm) heavy duty Wiper systems Heavy Duty Motor AFI 2.5 Wiper Motor Waterproof Wiper Motor NEW!!! 1 Shaft Length 2 Shaft Length 82081 82181 82082 82182 82011 82111 82012 82112

More information

FLEXTOOL FLEXTOOL OTPIMIZATION PARTS

FLEXTOOL FLEXTOOL OTPIMIZATION PARTS OTPIMIZATION PARTS The AED platform is a comprehensive toolbox allowing the adaption of the tool setup to all known process setups. The high level of alignment of the spraying tool and the corresponding

More information

Ford Fabricated Steel Products

Ford Fabricated Steel Products Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas

More information

35-kV Thru-Bushings F Series (bolt-in) for Air-Insulated to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp

35-kV Thru-Bushings F Series (bolt-in) for Air-Insulated to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp Page 1 2018 Equipment Connection Bus Bar, or Grounded Metal Equipment Plate F Series Mounting Holes ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric

More information

IF YOU RE READING THIS, THERE S A GOOD CHANCE

IF YOU RE READING THIS, THERE S A GOOD CHANCE TECH intro by Tyler Greenblatt captions and photos by Chris Maida BASSANI VICTORY SLIP-ONS We got a 2 hp and 7 ft-lbs. of torque gain with this simple bolt-on and some tuning! Our brand-new and 1 completely

More information

CLUTCH 6-1 CLUTCH CONTENTS

CLUTCH 6-1 CLUTCH CONTENTS TJ CLUTCH 6-1 CLUTCH CONTENTS page GENERAL INFORMATION CLUTCH COMPONENTS... 1 INSTALLATION METHODS AND PARTS USAGE... 1 DESCRIPTION AND OPERATION CLUTCH OPERATION... 1 DIAGNOSIS AND TESTING DIAGNOSTIC

More information

Part # Mustang Tru-Turn Suspension Package

Part # Mustang Tru-Turn Suspension Package 350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 12099599 64-66 Mustang Tru-Turn Suspension Package Front Components: 1 12093699 Upper Strong Arms 1 12092899

More information

HD 7700 Setup & Operator Manual

HD 7700 Setup & Operator Manual HD 7700 Setup & Operator Manual Issue 1 December, 01 Performance Design Inc. The Heavy Duty Ultima (HD 7700) electric punch has been designed to punch most any job that may pass through your bindery or

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publication No. PUSH TO TALK SWITCH P/N 08E96-MCA-101B GL1800 MII 13574 Issue Date February 2011 Honda Dealer: Please give a copy of these instructions to

More information

BDT Product Sales & Support (951) (800)

BDT Product Sales & Support (951) (800) BDT Product Sales & Support (951)530-3360 (800)325-0380 support@bdtenergygroup.com BDT Product Sales & Support (951)530-3360 BOW LX LED Dimensional Drawings A C B The new BOW LX LED Series continues the

More information

Installation Instructions Skylight FlexShades by Draper

Installation Instructions Skylight FlexShades by Draper Caution 1 Read entire procedure before installing. Keep instructions for future reference. 2 Tools needed for installation: Cordless drill/screwdriver, with flathead, phillips, and 1 /4" nut driver attachments

More information

Recommended Torque Setscrews D-LOK Mounting Bolts Recommended Torque Standard Ball Bearing Insert. EZ-KLEEN Recom. Torque. Recom.

Recommended Torque Setscrews D-LOK Mounting Bolts Recommended Torque Standard Ball Bearing Insert. EZ-KLEEN Recom. Torque. Recom. Bearing Reference ULTRA KLEEN E-Z KLEEN Extreme Duty Setscrew Ball Bearing GRIP TIGHT D-LOK Ball Bearing SELECTION Setscrew Ball Bearings Setscrew Key Hex Across Flats Recommended Setscrews D-LOK Mounting

More information

Parts Bulletin. We are pleased to inform you the introduction of Genuine Accessories for Swish125

Parts Bulletin. We are pleased to inform you the introduction of Genuine Accessories for Swish125 Parts Bulletin Model: UP125 (SWISH125) Ref: SMIPL/SPD/11-12/002 Date: 18 th Jan 2012 Subject: Part List of Genuine Accessories and Genuine Accessories Manual We are pleased to inform you the introduction

More information

Installation Instructions

Installation Instructions page 1 of 7 Description These feeds are designed for installation in shielded standard types of parabolic antennas. The feed is designed for positive metal-to-metal contact between the feed and the reflector,

More information

12 Watt LED Signal Light - Colored LED Warning Light - NEMA 4X - Audible Horn

12 Watt LED Signal Light - Colored LED Warning Light - NEMA 4X - Audible Horn 12 Watt LED Signal Light - Colored LED Warning Light - NEMA 4X - Audible Horn Part #: WAL-TL-1X12W-C-PA Made in the USA The WAL-TL-1X12W-C-PA LED Signal Light with Audible Horn from Larson Electronics

More information

AIR SPRING TYPES 1B SINGLE CONVOLUTE BELLOWS 2B DOUBLE CONVOLUTE BELLOWS 3B TRIPLE CONVOLUTE BELLOWS 1S SLEEVE TYPE ROLLING LOBE

AIR SPRING TYPES 1B SINGLE CONVOLUTE BELLOWS 2B DOUBLE CONVOLUTE BELLOWS 3B TRIPLE CONVOLUTE BELLOWS 1S SLEEVE TYPE ROLLING LOBE AIR SPRING TYPES 1B SINGLE CONVOLUTE BELLOWS 2B DOUBLE CONVOLUTE BELLOWS 3B TRIPLE CONVOLUTE BELLOWS 1S SLEEVE TYPE ROLLING LOBE 1R CONVENTIONAL ROLLING LOBE PRODUCT IDENTIFICATION SYSTEM Elements of the

More information

TELESCOPIC DROP ARM MAX DROP 3.0m MAX LOAD 40kg

TELESCOPIC DROP ARM MAX DROP 3.0m MAX LOAD 40kg TELESCOPIC DROP ARM MAX DROP 3.0m MAX LOAD The Telescopic Drop Arm is a simple and economic suspension for installations in which frequent variations in height are not required (i.e.: for cyclorama lighting,

More information

Kitchen Taps - Designer

Kitchen Taps - Designer Kitchen Taps - Designer Our stunning designer kitchen taps add a statement to any modern kitchen. Yet design does not come at the expense of practicality, with ceramic disc technology incorporated for

More information

TEST CHART. Voltage Supply

TEST CHART. Voltage Supply ALL MEASUREMENTS ARE MADE ON THE TERMINALS OF THE DISCONNECTED WIRING HARNESS PLUG TO THE CONTROL UNIT (ECU) WITH IGNITION OFF UNLESS OTHERWISE INDICATED. Voltage Supply Ignition Voltage supply to the

More information

An ISO/TS 16949:2009 Certified Company. CalAct Fall Conference 2011

An ISO/TS 16949:2009 Certified Company. CalAct Fall Conference 2011 CalAct Fall Conference 2011 Make sure glass is flush with mirror shell Driver should tell you where to align mirror head Small adjustment of glass Flat should see top of 3ft cone 15 ft back Overlap convex

More information

4. SHIELDS. 4.1 Power Cable. 4.2 Electronic Cable Conductor Shield (Strand Shield) Outer Shield (Insulation Shield) 60

4. SHIELDS. 4.1 Power Cable. 4.2 Electronic Cable Conductor Shield (Strand Shield) Outer Shield (Insulation Shield) 60 4. SHIELDS 4.1 Power Cable 4.1.1 Conductor Shield (Strand Shield) 60 4.1.2 Outer Shield (Insulation Shield) 60 4.2 Electronic Cable 4.2.1 Foil Shield 62 4.2.2 Copper Braid Shield 63 4.2.3 Spiral (Serve)

More information

WJ 6.5" Long Travel PART #: RK-605LT-WJ APPLICATION: WJ

WJ 6.5 Long Travel PART #: RK-605LT-WJ APPLICATION: WJ Rusty s Off-Road Products 7161 Steele Station Road Rainbow City, AL 35906 Phone: (256) 442-0607 FAX: (256) 442-0017 Web Site: www.rustysoffroad.com WJ 6.5" Long Travel PART #: RK-605LT-WJ APPLICATION:

More information

Your Steering Column Specialist

Your Steering Column Specialist Cable Shift Installation Instructions for: ididit Column to GM Trans www.ididitinc.com ididit Column to 350 Trans...PG1-4 ididit Column to 400 Trans...PG5-8 ididit Column to 700R4 & 4L60 Series Trans...PG9-12

More information

Maintenance Instructions. World Leader in Modular Torque Limiters. JSE AEA Extruder Clutch

Maintenance Instructions. World Leader in Modular Torque Limiters. JSE AEA Extruder Clutch World Leader in Modular Torque Limiters PROTECTING EQUIPMENT& MACHINERYYEARSInstallation and Maintenance Instructions JSE.5-0234AEA Extruder Clutch 1304 Twin Oaks Street Wichita Falls, Texas 76302 (940)

More information

LCT Shielded Primary UD EPR LCT Shielded Primary UD EPR Cable

LCT Shielded Primary UD EPR LCT Shielded Primary UD EPR Cable ed Primary UD EPR ed Primary UD EPR Cable Aluminum or Copper Conductor. EPR Insulation. Copper Longitudinal Corrugated Tape (). Low Density Polyethylene Jacket. APPLICATIONS Predominantly used for primary

More information

The Industrial Choice. Model AHX All Aluminum LARGE ADJUSTABLE PROPELLERS. Heat Exchangers & Industrial Ventilation

The Industrial Choice. Model AHX All Aluminum LARGE ADJUSTABLE PROPELLERS. Heat Exchangers & Industrial Ventilation The Industrial Choice. Model AHX All Aluminum LARGE ADJUSTABLE ELLERS Heat Exchangers & Industrial Ventilation CATALOG 524 March 203 Adjustable Propellers Model AHX All Aluminum Model AHX is an all-aluminum

More information

Zoneflow Engineering Installation and Maintenance Manual

Zoneflow Engineering Installation and Maintenance Manual Zoneflow Engineering Installation and Maintenance Manual Introduction The Cadexair ZoneFlow is designed to be installed in a commercial kitchen NFPA-96 central exhaust fan duct system up stream of each

More information

15 kv and 25 kv Thru-Bushings

15 kv and 25 kv Thru-Bushings Page 1 2001 ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric strength, dielectric loss and power factor Choice of shapes allows design innovation

More information

Width (inch) Max PSI Diameter (inch) Part Number Weight (lbs.) Rim Range (inch) Load Range Max Load (lbs.)

Width (inch) Max PSI Diameter (inch) Part Number Weight (lbs.) Rim Range (inch) Load Range Max Load (lbs.) Fuel Tires GRIPPER A/T TIRES The Gripper A/T features a bold off-road look that instantly transforms any vehicle. The aggressive, high-void all-terrain tread features a stiff sidewall to help prevent punctures

More information

740G Double Disc Check Valve

740G Double Disc Check Valve OPERATION/MAINTENANCE MANUAL 740G Double Disc Check Valve TABLE OF CONTENTS PAGE General Information 2 Installation / Operation 3 Troubleshooting / Assembly 4 Parts Information 5 WARNING: 1. Read all applicable

More information

INSTRUCTIONS 360 Y-DROP

INSTRUCTIONS 360 Y-DROP INSTRUCTIONS 60 Y-DROP JOHN DEERE 60 60 Y-DROP REGISTRATION Please visit productregistration.60yieldcenter.com to complete the product registration for your 60 Y-DROP so we can better support our products

More information

WARNING: Only perform this installation if you are experienced, fully equipped mechanic.

WARNING: Only perform this installation if you are experienced, fully equipped mechanic. DYNATRAC V3.2 2005-Present Ford Super Duty 250/350-4x4, Front Axle, Free Spin Conversion Kit Some of the less common tools, which will be required: 6 point Spanner socket (OTC #7090-A or equivalent). These

More information

INSTALLATION INSTRUCTIONS WHITE / SINGLE COLOR 24V LED TAPE

INSTALLATION INSTRUCTIONS WHITE / SINGLE COLOR 24V LED TAPE LLI-L1.5W LLI-L2.2W LLI-L2.5W LLI-L3.5W LLI-L4.4W LLI-LHE3.5W LLI-LHE4.4W LLI-LHE5.9W LLI-LTP2.5W LLI-LTP5.0W LLI-LSE3.0W LLI-LWF5.5W LLI-LC4.4W **DANGER: Prior to installation, disconnect power at the

More information

0.4 hp. Right Angle Tools

0.4 hp. Right Angle Tools 0.4 hp. Right Angle Tools Models: 50210, 50211, 50561, 50570 Lubricants: 95842 Dynabrade Air Lube 10W/NR 95848 Gear Oil Lubricant Gun: 95541 Push-Type Gun 0.4 hp. Right Angle Tools Models: 50210, 50211,

More information

Half-pitch and Multi-function Two Piece Connector

Half-pitch and Multi-function Two Piece Connector Half-pitch and Multi-function Two Piece Connector FX2 Series Sttacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various

More information

ASSEMBLY INSTRUCTIONS FOR WILWOOD FRONT D8-6 CALIPER, BRAKE PAD, AND FLEX LINE REPLACEMENT KIT CHEVROLET CORVETTE

ASSEMBLY INSTRUCTIONS FOR WILWOOD FRONT D8-6 CALIPER, BRAKE PAD, AND FLEX LINE REPLACEMENT KIT CHEVROLET CORVETTE ASSEMBLY INSTRUCTIONS FOR WILWOOD FRONT D8-6 CALIPER, BRAKE PAD, AND FLEX LINE REPLACEMENT KIT 965-98 CHEVROLET CORVETTE PART NUMBER GROUP 40-857 DISC BRAKES SHOULD ONLY BE INSTALLED BY SOMEONE EXPERIENCED

More information

SP30 - BJ - FCF50 - PU

SP30 - BJ - FCF50 - PU SMART Plungers SP-FCF Series Features Always return back to original position (wide angle 42 ) No need tool for pad replacement Less friction for Level compensator Light weight and long life time Compact

More information

SEATING. tropitone.com 1

SEATING. tropitone.com 1 SEATING tropitone.com 1 cast and aluminum seating 311424 BelMar Cast X-Back 34"H x 25.5"W x 25.5"D Weight: 24.5 lb Nest Qty: 4 31142405 BelMar Cast X-Back 34"H x 25.5"W x 25.5"D Seat 19"H Arm 24.5"H Weight:

More information

INSTRUCTIONS 360 Y-DROP

INSTRUCTIONS 360 Y-DROP INSTRUCTIONS 0 Y-DROP 0 Y-DROP REGISTRATION Please visit productregistration.0yieldcenter.com to complete the product registration for your 0 Y-DROP so we can better support our products from day one and

More information

LCT Shielded Primary UD TRXLP LCT Shielded Primary UD TRXLP Cable

LCT Shielded Primary UD TRXLP LCT Shielded Primary UD TRXLP Cable ed Primary UD TRXLP ed Primary UD TRXLP Cable Aluminum or Copper Conductor. TRXLP Insulation. Copper Longitudinal Corrugated Tape (). Low Density Polyethylene Jacket. APPLICATIONS Predominantly used for

More information

SESAMO REVOLVING DOOR 4 WINGS

SESAMO REVOLVING DOOR 4 WINGS SESAMO REVOLVING DOOR 4 WINGS SYSTEM: Four leaves automatic or manual revolving door which is available in various design options. Executions with night shutters in manual or automatic version, with electric

More information

Tires. We recommend that you visually check your tires every day. If you think a tire might be low, check it immediately with a tire gauge.

Tires. We recommend that you visually check your tires every day. If you think a tire might be low, check it immediately with a tire gauge. To safely operate your vehicle, your tires must be the proper type and size, in good condition with adequate tread, and correctly inflated. The following pages give more detailed informationonhowandwhento

More information

ASE Practice Test A3 Manual Drive Train

ASE Practice Test A3 Manual Drive Train Clutch Diagnosis and Repair ASE Practice Test A3 Manual Drive Train 1) Which of the following are the three critical clutch pedal measurements? a. Pedal height, apply pressure, and free play b. Pedal free

More information

Rear Side Under Spoiler

Rear Side Under Spoiler 00 Rear Side Under Spoiler Installation Manual Genuine part number : E560FL00 Applicable model : IMPREZA 4D (7MY~) - This manual describes how to install and handle the Rear Side Under Spoiler. - Read

More information

NEEDLE ROLLERS. Polígono Indutrial O Rebullón s/n Mos - España -

NEEDLE ROLLERS. Polígono Indutrial O Rebullón s/n Mos - España - NEEDLE ROLLERS Needle rollers In certain applications, the limited amount of space available for bearings and the loads to be supported require the use of a full complement of needles independent of any

More information

INSTRUCTIONS 360 Y-DROP

INSTRUCTIONS 360 Y-DROP INSTRUCTIONS 60 Y-DROP 60 Y-DROP REGISTRATION Please visit productregistration.60yieldcenter.com to complete the product registration for your 60 Y-DROP so we can better support our products from day one

More information

MMR20. Instruction Manual for Operation & Maintenance. IB International. Ph:

MMR20. Instruction Manual for Operation & Maintenance. IB International.  Ph: MMR20 Instruction Manual for Operation & Maintenance IB International www.ibinternational.com.au Ph: 07 3399 1288 Contents Introduction... 2 Identification Data... 2 Machine Controls & Components... 3

More information

INSTRUCTIONS 360 Y-DROP

INSTRUCTIONS 360 Y-DROP INSTRUCTIONS 60 Y-DROP 60 Y-DROP REGISTRATION Please visit productregistration.60yieldcenter.com to complete the product registration for your 60 Y-DROP so we can better support our products from day one

More information

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT WITH.9 DIAMETER VENTED ROTOR (. OFFSET) 005 - PRESENT MUSTANG 8.8 (5 LUG) PART NUMBER GROUP 0-98 INSTALLATION OF THIS KIT SHOULD ONLY

More information

KEMPPI K5 WELDING EQUIPMENT. MinarcMig Evo 200 ULTIMATE ENERGY PERFORMANCE WITH PORTABLE COMFORT

KEMPPI K5 WELDING EQUIPMENT. MinarcMig Evo 200 ULTIMATE ENERGY PERFORMANCE WITH PORTABLE COMFORT KEMPPI K5 WELDING EQUIPMENT MinarcMig Evo 200 ULTIMATE ENERGY PERFORMANCE WITH PORTABLE COMFORT 6.04.2018 MinarcMig Evo 200 EASY MIG/MAG WELDING FOR THE MOBILE WELDER MinarcMig Evo 200 is a portable MIG/MAG

More information

18. KSP 18. KSP 18.1 1200016 1200016 18.2 18.3 1200016 1200016 18.4 18.5 1200016 1200016 18.6 18.7 1200016 1200016 18.8 18.9 1200016 DARLEY BASIC ASSEMBLING TECHNIQUES Work with clean tools in clean surroundings

More information

Maximum submersible power cable length (max. cable length in feet - starter to motor)

Maximum submersible power cable length (max. cable length in feet - starter to motor) Cable sizing charts V and 0 V, ph V ph 0 V ph 0. 0. 0 (40) 00 (0) 0 (68) 00 0 (9) 90. (8) 0 (46) 0 (7) - 0 (64) 60 (49) 880 (68) (98) 480 (46) 0 90 (8) 0* (4*) 7. 40 (04) 90 (44) 00 () () 60 (9) 480 (46)

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Product: Quicker Disconnects Part Number: JKS2030 - JKS2034 INSTALLATION INSTRUCTIONS Applications: Wrangler JK, 2007+ 517-278-1226 jks@sporttruckusainc.com www.jksmfg.com 491 W. Garfield Avenue, Coldwater,

More information

Strikeplates for Locks

Strikeplates for Locks Strikeplates for Locks STONE 2/₄ 3 Bright Brass 5 Antique Brass /₂ 3/₄ 2 2/₂ 3 4 P Vintage Bronze NOTE: width of lip strikes measured from center of screw holes to end of lip Jeske no. 5 Satin Nickel 26

More information