Exploded Parts Manual SG14, SG14T, SG18, SG14R, SGC, SG18F, SGM1824, SGM24, SGM34 Gas Fryer Models Built after 11/1999

Transcription

1 IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment: Model #: Serial #: Date Purchased: ENGLISH Exploded Parts Manual SG4, SG4T, SG8, SG4R, SGC, SG8F, SGM824, SGM24, SGM34 Gas Fryer Models Built after /999 L20-22 Rev 4 (06/06)

2 Post in a prominent location the instructions to be followed in the event that an operator smells gas. Obtain this information from your local gas supplier. WARNING DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WARNING Improper installation, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this appliance. WARNING Installation, maintenance and repairs should be performed by a Pitco Authorized Service and Parts (ASAP) company technician or other qualified personnel. Installation, maintenance or repairs by unauthorized or unqualified personnel will void the warranty. WARNING Installation and all connections must be made according to national and local regulations and codes in force. WARNING During the warranty period if a customer elects to use a nonoriginal part or modifies an original part purchased from Pitco and/or its Authorized Service and Parts (ASAP) companies, this warranty will be void. In addition, Pitco and its affiliates will not be liable for any claims, damages or expenses incurred by the customer which arises directly or indirectly, in whole or in part, due to the installation of any modified part and/or received from an unauthorized service center. WARNING This appliance, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable. WARNING Adequate means must be provided to LIMIT the movement or this appliance without depending on the gas or electrical cord connection. Single appliances equipped with legs must be stabilized by installing anchor straps. All appliances equipped with casters must be stabilized by installing restraining chains. WARNING An appliance equipped with casters and a flexible gas line must be connected to the gas supply with a quick disconnect device. This quick disconnect must comply with ANSI Z24.4. WARNING DO NOT alter or remove structural material on the appliance to accommodate placement under a ventilation hood. WARNING This appliance is intended for professional use only and should be operated by fully trained and qualified personnel. WARNING If the appliance is equipped with a power cord and it is damaged, it must be replaced by a Pitco Authorized Service and Parts (ASAP) company technician, or a similarly qualified person in order to avoid a hazard. WARNING The power supply must be disconnected before servicing, maintaining or cleaning this appliance. WARNING The appliance is NOT jet stream approved. DO NOT clean the appliance with a water jet. WARNING DO NOT attempt to move this appliance or transfer hot liquids from one container to another when the unit is at operating temperature or filled with hot liquids. Serious personal injury could result if skin comes in contact with the hot surfaces or liquids. WARNING DO NOT sit or stand on this appliance. The appliance s front panel, tank, splash back, tank cover, workshelf, drain board is not a step. Serious injury could result from slipping, falling or contact with hot liquids. WARNING NEVER use the appliance as a step for cleaning or accessing the ventilation hood. Serious injury could result from slips, trips or from contacting hot liquids. WARNING The oil/shortening level should NOT fall below the minimum indicated level line at any time. The use of old shortening can be dangerous as it will have a reduced flash point and be more prone to surge boiling. WARNING The particles, crumbs and cracklings from the crumb tray/catch (if supplied) in a filtering system must be emptied into a fireproof container at the end of the frying operation each day. Some food particles can spontaneously combust into flames if left soaking in certain oil/shortening materials. WARNING Completely shut the appliance down when shortening/oil is being drained from the appliance. This will prevent the appliance from heating up during the draining and filling process. Serious injury can occur. WARNING This appliance is intended for indoor use only. WARNING DO NOT operate appliance unless all panels and access covers are attached correctly. WARNING It is recommended that this appliance be inspected by a qualified service technician for proper performance and operation on a yearly basis. WARNING There is an open flame inside this appliance. The unit may get hot enough to set nearby materials on fire. Keep the area around the appliance free from combustibles. WARNING DO NOT supply the appliance with a gas that is not indicated on the data plate. If you need to convert the appliance to another type of fuel, contact your dealer. WARNING DO NOT use an open flame to check for gas leaks! WARNING If gas flow to appliance is interrupted, or pilots extinguish, wait 5 minutes before attempting to relight the pilot to allow any residual gas in appliance to dissipate. WARNING Ensure that the appliance can get enough air to keep the flame burning correctly. If the flame is starved for air, it can give off a dangerous carbon monoxide gas. Carbon monoxide is a clear odorless gas that can cause suffocation. 2 L20-22 Rev 4 (06/06)

3 This Page Left Intentionally Blank L20-22 Rev 4 (06/06) 3

4 TABLE OF CONTENTS FRYER EXPLODED VIEWS... 6 FRYER EXPLODED VIEW PARTS LIST...6 FRYER EXPLODED VIEW...7 FRYER EXPLODED VIEW 2 PARTS LIST...8 FRYER EXPLODED VIEW A) TANK & FLUE... 0 TANK & FLUE DRAWING A PARTS LIST...0 TANK & FLUE DRAWING A... B) BURNER ASSEMBLY... 2 BURNER ASSEMBLY DRAWING B PARTS LIST B(A)...2 BURNER ASSEMBLY DRAWING B...3 BURNER ASSEMBLY DRAWING B PARTS LIST B(B)...4 C) GAS TRAIN... 5 GAS TRAIN DRAWING C PARTS LIST...6 GAS TRAIN DRAWING C...7 GAS TRAIN DRAWING C2 PARTS LIST...8 GAS TRAIN DRAWING C2...9 D) GAS CONVERSION KITS GAS CONVERSION KITS QUICK REFERENCE...20 GAS CONVERSION KITS SIMPLE INSTRUCTIONS DRAWING D...2 GAS CONVERSION KITS SLOT FACE BURNERS PARTS LIST D...22 GAS CONVERSION KITS WIRE FACE BURNERS PARTS LIST D GAS CONVERSION KITS SGC PARTS LIST D GAS CONVERSION KITS SGM PARTS LIST D GAS CONVERSION KITS SLOT FACE BURNERS (CE) PARTS LIST D GAS CONVERSION KITS WIRE FACE BURNERS (CE AND AUSTRALIA) PARTS LIST D GAS CONVERSION KITS SGC (CE) PARTS LIST D GAS CONVERSION KITS SGM (CE) PARTS LIST D E) FRYER CABINET MODULAR CABINET DRAWING E PARTS LIST E(A)...30 MODULAR CABINET DRAWING E...3 MODULAR CABINET DRAWING E PARTS LIST E(B)...32 MODULAR CABINET DRAWING E PARTS LIST E(C)...33 STANDARD CABINET DRAWING E2 PARTS LIST...34 STANDARD CABINET DRAWING E F) ENTRANCE BOX ENTRANCE BOX DRAWING F PARTS LIST...36 ENTRANCE BOX DRAWING F...37 G) CONTROL BOX CONTROL BOX PRE 8/00 DRAWING G PARTS LIST...38 CONTROL BOX PRE 8/00 DRAWING G...39 CONTROL BOX POST 8/00 DRAWING G2 PARTS LIST...40 CONTROL BOX POST 8/00 DRAWING G2...4 H) SMALL ASSEMBLIES SMALL ASSEMBLIES DRAWING H PARTS LIST...42 SMALL ASSEMBLIES DRAWING H...43 I) DRAIN LINE DRAIN LINE DRAWING I PARTS LIST...44 DRAIN LINE DRAWING I...45 J) FILTER PAN FILTER PAN DRAWING J PARTS LIST...46 FILTER PAN DRAWING J...47 K) WASTE OIL MANAGEMENT WASTE OIL MANAGEMENT DRAWING K PARTS LIST...48 WASTE OIL MANAGEMENT DRAWING K L20-22 Rev 4 (06/06)

5 L) PUMP ASSEMBLY PUMP ASSEMBLY PRE 3/04 DRAWING L PARTS LIST...50 PUMP ASSEMBLY PRE 3/04 DRAWING L...5 PUMP ASSEMBLY POST 3/04 DRAWING L2 PARTS LIST...52 PUMP ASSEMBLY POST 3/04 DRAWING L PUMP ASSEMBLY SFSG DRAWING L3 PARTS LIST...54 PUMP ASSEMBLY SFSG DRAWING L M) PUMP BOX PUMP BOX DRAWING M PARTS LIST...56 PUMP BOX DRAWING M...57 N) RETURN LINE RETURN LINE DRAWING N PARTS LIST...58 RETURN LINE DRAWING N...59 O) FLUSH HOSE ASSEMBLY FLUSH HOSE ASSEMBLY DRAWING O PARTS LIST...60 FLUSH HOSE ASSEMBLY DRAWING O...6 P) FLUSH HOSE (HOSE) ASSEMBLY FLUSH HOSE (HOSE) ASSEMBLY DRAWING P PARTS LIST...62 FLUSH HOSE (HOSE) ASSEMBLY DRAWING P...63 Q) BASKET LIFT BASKET LIFT DRAWING Q PARTS LIST...64 BASKET LIFT DRAWING Q...65 R) BASKET LIFT COMPONENTS BASKET LIFT COMPONENTS DRAWING R PARTS LIST...66 BASKET LIFT COMPONENTS DRAWING R...67 S) ACCESSORIES ACCESSORIES DRAWING S PARTS LIST S(A)...68 ACCESSORIES DRAWING S...69 ACCESSORIES DRAWING S PARTS LIST S(B)...70 T) BNB BNB DRAWING T PARTS LIST...72 BNB DRAWING T...73 U) DROP INS DROP INS DRAWING U PARTS LIST...74 DROP INS DRAWING U...75 L20-22 Rev 4 (06/06) 5

6 FRYER EXPLODED VIEWS Fryer Exploded View Parts List ITEM # PART # PART DESCRIPTION B C FILTER PAN COVER ASSEMBLY SFD B C FILTER PAN COVER ASSEMBLY SFSG8 B C FILTER PAN COVER ASSEMBLY SFSG4* B C FILTER PAN COVER ASSEMBLY SGM824 B C FILTER PAN COVER ASSEMBLY SGM24 B C FILTER PAN COVER ASSEMBLY SGM34 B C REAR-TEE MANIFOLD WELDMENT SG4/SG8 B C REAR-TEE MANIFOLD WELDMENT SGM824/SGM24 B C REAR-TEE MANIFOLD WELDMENT SGM24-2 B C REAR-TEE MANIFOLD WELDMENT SGM824/SGM34 B C REAR-TEE MANIFOLD WELDMENT SGM24/SGM34 B C REAR-TEE MANIFOLD WELDMENT SGM34-2 B C REAR-TEE MANIFOLD WELDMENT SG4-2/SG8 B C REAR-TEE MANIFOLD WELDMENT SG4/SG8/SG4,SG8/SG4/SG8 B C REAR-TEE MANIFOLD WELDMENT SG4/SG8/SG8 B C REAR-TEE MANIFOLD WELDMENT SG4-3/SG8 B C REAR-TEE MANIFOLD WELDMENT SG4-2/SG8/SG4 B C REAR-TEE MANIFOLD WELDMENT SG4-2/SG8-2 2 B C REAR-TEE MANIFOLD WELDMENT SG8/SG4/SG8/SG4 B C REAR-TEE MANIFOLD WELDMENT SG4/SG8-2/SG4 B C REAR-TEE MANIFOLD WELDMENT SG8/SG4-2/SG8 B C REAR-TEE MANIFOLD WELDMENT SG8-3/SG4 B C REAR-TEE MANIFOLD WELDMENT SG8-2/SG4/SG8 B8034-C REAR-TEE MANIFOLD WELDMENT SG4-2/SGBNB4/SG4-2 (CRACKER BARREL) B80342-C REAR-TEE MANIFOLD WELDMENT SGM824-3/SGM34 B REAR-TEE MANIFOLD WELDMENT SG4-2 B REAR-TEE MANIFOLD WELDMENT SG8-2 B REAR-TEE MANIFOLD WELDMENT SG4-3 B REAR-TEE MANIFOLD WELDMENT SG8-3 B REAR-TEE MANIFOLD WELDMENT SG4-4 B REAR-TEE MANIFOLD WELDMENT SG GAS RESTRICTOR FITTING UNREGULATED 3/4 M/F NPT 4.83mm SG GAS RESTRICTOR FITTING UNREGULATED 3/4 M/F NPT 5.8mm SG4R GAS RESTRICTOR FITTING UNREGULATED 3/4 M/F NPT 5.6mm SG8 4 P SCREW 8-32 X /4 INDENTED HEX HEAD ZN 5 P60756 CHROME HANDLE 3" 6 P BUSHING REDUCER -/4 MNPT X FNPT HEX BLACK IRON (366,000 BTU MAX) 7 P UNION 3/4 NPT BLACK IRON 8 P PIPE NIPPLE CLOSE NPT SCHED-40 BLACK STEEL CE P PIPE NIPPLE CLOSE -/4 NPT SCHED-40 BLACK STEEL CE 9 PP0023 SCREW 0-24 X 3/8 SELF TAPPING 0 PP0479 PLUG -/4 NPT HEX HEAD BLACK IRON PP0964 GAS SUPPLY ADAPTOR FITTING -/4 BSPT X -/4 FNPT CE PP0966 GAS SUPPLY ADAPTOR FITTING BSPT X FNPT CE PP292 GAS SUPPLY ADAPTOR FITTING 3/4 BSPT X 3/4 FNPT CE 6 L20-22 Rev 4 (06/06)

7 Fryer Exploded View L20-22 Rev 4 (06/06) 7

8 Fryer Exploded View 2 Parts List ITEM # PART # PART DESCRIPTION B FILTER PICKUP BLOCK WELDMENT (NOT USED PRIOR TO 0/3/04) 2 A84400-C CABINET CABLE RETAINER A C FRONT PANEL BOTTOM RAIL SG8,SG8F A C FRONT PANEL BOTTOM RAIL SG4,SG4R,SG4T 3 A C FRONT PANEL BOTTOM RAIL SGM824 A C FRONT PANEL BOTTOM RAIL SGM24 A C FRONT PANEL BOTTOM RAIL SGM34 4 A FILTER PICKUP BLOCK (PRIOR TO 0/3/04) 5 A FILTER PUMP PLATE MOUNTING ROD 6 A C FILTER PUMP PLATE MOUNTING ROD HOLDER O-RING VITON NEWMAN # (NOT USED PRIOR TO 0/3/04) POWER CORD JUMPER 3-WIRE 6A 34" IEC-320 MALE/FEMALE POWER CORD 3-WIRE 6A 96" IEC-320 FEMALE, NEMA 5-5P MALE STRAIN RELIEF LAY-IN P PIPE NIPPLE 3/4 NPT SCHED-40 X 4-/2 LG BLACK IRON (PRIOR TO 0/3/04) 2 PP0023 SCREW 0-24 X 3/8 SELF TAPPING SCREW 0-24 X 5/8 HEX HEAD MACHINE WITH PATCH-LOC ZN 4 PP04 O-RING VITON NEWMAN # (PRIOR TO 0/3/04) 8 L20-22 Rev 4 (06/06)

9 Fryer Exploded View 2 L20-22 Rev 4 (06/06) 9

10 A) TANK & FLUE Tank & Flue Drawing A Parts List ITEM # PART # PART DESCRIPTION B33250-C TANK WELDMENT STANDARD SST SG4 B33260-C TANK WELDMENT STANDARD SST SG4R B33270-C TANK WELDMENT STANDARD SST SG4T B33280-C TANK WELDMENT STANDARD SST SG8 B C TANK WELDMENT MODULAR SST SG4 B C TANK WELDMENT MODULAR SST SG4R B C TANK WELDMENT MODULAR SST SG4T B C TANK WELDMENT MODULAR SST SG8 B C TANK WELDMENT STANDARD CRS SG4 B C TANK WELDMENT STANDARD CRS SG4R B33230-C TANK WELDMENT STANDARD CRS SG8 B C TANK WELDMENT STANDARD CRS SG4T B C TANK WELDMENT SGC B C TANK WELDMENT SG8F B C TANK WELDMENT SGM824 B33280-C TANK WELDMENT SGM24 B C TANK WELDMENT SGM34 B35030 FLUE WELDMENT SG4 B FLUE WELDMENT SG4R B FLUE WELDMENT SG4T B FLUE WELDMENT SG8 2 B35040 FLUE WELDMENT LONG SGC (BEFORE 5/03) B FLUE WELDMENT SG8F B FLUE WELDMENT SHORT FLUE SGC B FLUE WELDMENT SGM824 B FLUE WELDMENT SGM24 B FLUE WELDMENT SGM BALL VALVE -/4 FULL PORT REVERSIBLE LUG LEFT HAND SG4T BALL VALVE -/4 FULL PORT REVERSIBLE LUG RIGHT HAND BALL VALVE -/4 FULL PORT REVERSIBLE LUG LEFT HAND LOCKING SG4T BALL VALVE -/4 FULL PORT REVERSIBLE LUG RIGHT HAND LOCKING BALL VALVE -/4 FULL PORT REVERSIBLE LUG RIGHT HAND LOCKING SGM PP0368 BALL VALVE -/4 FULL PORT STANDARD PP0962 BALL VALVE -/4 FULL PORT LOCKING STANDARD 4 5 A B C DRAIN LINE PIPING ADAPTER SG, SGM (NON-FILTER) WIRING PROBE SERVICE KIT SG A B C DRAIN LINE PIPING ADAPTER SG8F WIRING PROBE SERVICE KIT (BACK UP THERMOSTAT) 6 B WIRING RETURN OR HOSE JUMPER 24V SGM 7 A40200-C DRAIN VALVE INTERLOCK MOUNTING PLATE 8 B DRAIN VALVE INTERLOCK SENSOR 9 PP0263 PROXIMITY ACTUATOR SWITCH 0 A FLUE GASKET SG4T P STEEL TANK PLUG /4NPT TANK REAR ADAPTER 37.5 FLARE SWIVEL X /2NPT P STEEL TANK PLUG /2NPT A CLAMP PROBE THERMISTOR COMPUTER/DIGITAL/SOLID STATE A CLAMP HIGH LIMIT THERMOSTAT SG MILLIVOLT 3 A CLAMP TEMPERATURE PROBE SG4T I-2/3300/SS THERMOSTAT A40202-C CLAMP THERMOSTAT BULB SG4T MILLIVOLT A CLAMP HIGH LIMIT SG4T 4 PP0266 SCREW 4-40 X /4 ROUND HEAD ZN 5 PP0686 SCREW 6-32 X /4 ROUND HEAD PHILLIPS ZN 6 PP366 SCREW 0-24 X 5/8 PAN HEAD SST THREAD FORMING 7 PP0023 SCREW 0-24 X 3/8 SELF TAPPING 8 P SCREW 0-24 X 3/4 SELF TAPPING 9 P NUT HEX 0-24 KEP ZN 20 A35270-C FLUE DEFLECTOR SGC 0 L20-22 Rev 4 (06/06)

11 Tank & Flue Drawing A L20-22 Rev 4 (06/06)

12 B) BURNER ASSEMBLY Burner Assembly Drawing B Parts List B(A) ITEM # PART # PART DESCRIPTION SEE PARTS LIST B(B) BURNER MANIFOLD WELDMENT B SELF-CLEANING BURNER RUNNER TUBE SG4, SG4R 2 B SELF-CLEANING BURNER RUNNER TUBE SG8 B SELF-CLEANING BURNER RUNNER TUBE LEFT-HAND SG4T B SELF-CLEANING BURNER RUNNER TUBE RIGHT-HAND SG4T THERMAL-LIMIT SWITCH WITH MANUAL RESET A GASKET BURNER BRACKET SG4R,SGM824 A GASKET BURNER BRACKET SGM24 4 A GASKET BURNER BRACKET SGM34 3M SUPER 77 MULTIPURPOSE HIGH TACK SPRAY ADHESIVE (REQUIRED WHEN INSTALLING NEW ITEM #4) DO NOT SPRAY ADHESIVE ACROSS BURNER FACES A BURNER FLAME JUMPER SG4,SG4R,SG8,SG8F,SGC 5 A80360 BURNER CROSSOVER SGM824,SGM24,SGM34 B BURNER FLAME JUMPER WELDMENT SG4,SG4R,SG8,SG8F A80370 BURNER SHIELD NATURAL LEFT-HAND SGM824 A C BURNER COLLAR LP FULL LEFT-HAND SGM824 6 A BURNER SHIELD NATURAL LEFT-HAND SGM24 A C BURNER COLLAR LP FULL LEFT-HAND SGM24 A BURNER SHIELD NATURAL LEFT-HAND SGM34 A80349-C BURNER COLLAR LP FULL LEFT-HAND SGM34 A BURNER SHIELD NATURAL RIGHT-HAND SGM824 A C BURNER COLLAR LP FULL RIGHT-HAND SGM824 7 A BURNER SHIELD NATURAL RIGHT-HAND SGM24 A C BURNER COLLAR LP FULL RIGHT-HAND SGM24 A8037 BURNER SHIELD NATURAL RIGHT-HAND SGM34 A C BURNER COLLAR LP FULL RIGHT-HAND SGM34 B C BURNER SLOTTED-FACE NATURAL B C BURNER SLOTTED-FACE LP 8 BURNER INCONEL 60 WIRE-FACE SCREEN NATURAL SCB & LP B80490 (REPLACES B803000) FITTING ADAPTER FLARED 5/6-6 UN-2A X /2 FNPT BRASS FITTING /4 MNPT X UNS ORIFICE TIP BRASS A FITTING TEST PRESSURE PLUG /8-27 (CE) B N/A PLUG /8 NPT 3/6 HEX SOCKET STEEL 2 SEE PARTS LIST B(B) ORIFICE TIP 3 PP0023 SCREW 0-24 X 3/8 SELF TAPPING 4 PP0687 SCREW 6-32 X 5/6 TRUSS HEAD PHILLIPS ZN 5 SEE PARTS LIST B(B) BURNER BRACKET A C SELF-CLEANING BURNER HIGH-LIMIT BRACKET SG4, SG4R, SG8 6 A C SELF-CLEANING BURNER HIGH-LIMIT BRACKET LEFT-HAND SG4T A C SELF-CLEANING BURNER HIGH-LIMIT BRACKET RIGHT-HAND SG4T 7 P SCREW 0-6 X 5/8 HEX HEAD SELF-DRILLING 8 A BURNER SHROUD SGM34 B BURNER ASSEMBLY INCONEL 60 WIRE-FACE SG4 B BURNER ASSEMBLY SLOT FACE NATURAL SG4R 9 NOT SHOWN B BURNER ASSEMBLY INCONEL 60 WIRE-FACE SG4R (INCLUDES B BURNER ASSEMBLY INCONEL 60 WIRE-FACE SG8 ITEMS:, 5- B BURNER ASSEMBLY INCONEL 60 WIRE-FACE SG4T 0, B, 3, B BURNER ASSEMBLY INCONEL 60 WIRE-FACE SGM824 5, & 8) B BURNER ASSEMBLY INCONEL 60 WIRE-FACE SGM24 B BURNER ASSEMBLY INCONEL 60 WIRE-FACE SGM34 2 L20-22 Rev 4 (06/06)

13 Burner Assembly Drawing B L20-22 Rev 4 (06/06) 3

14 Burner Assembly Drawing B Parts List B(B) ITEM # PART # PART DESCRIPTION B BURNER MANIFOLD WELDMENT SG8F B BURNER MANIFOLD WELDMENT SG8 B BURNER MANIFOLD ASSEMBLY SG4T B BURNER MANIFOLD WELDMENT SGC B80390 BURNER MANIFOLD WELDMENT CENTER-TAP SG4, SG4R (REPLACES B802970) B BURNER MANIFOLD WELDMENT SGM824 B BURNER MANIFOLD WELDMENT SGM24 B BURNER MANIFOLD WELDMENT SGM34 A75370 ORIFICE TIP.45mm DIA P ORIFICE TIP /6 DIA P ORIFICE TIP #36 DIA P ORIFICE TIP #37 DIA P ORIFICE TIP #38 DIA P ORIFICE TIP #39 DIA P ORIFICE TIP #40 DIA 2 P60734 ORIFICE TIP #4 DIA P ORIFICE TIP #42 DIA P ORIFICE TIP #43 DIA P ORIFICE TIP #44 DIA P ORIFICE TIP #53 DIA P ORIFICE TIP #54 DIA P ORIFICE TIP #55 DIA PP0859 ORFICE TIP.5 mm DIA A BURNER BRACKET SG4 A BURNER BRACKET SG4R A80280 BURNER BRACKET SG4T A BURNER BRACKET SG8 5 A BURNER BRACKET SGC A BURNER BRACKET SG8F A BURNER BRACKET SGM824 A BURNER BRACKET SGM24 A BURNER BRACKET SGM34 4 L20-22 Rev 4 (06/06)

15 This Page Left Intentionally Blank Exploded Parts-SG Gas Models L20-22 Rev 4 (06/06) 5

16 C) GAS TRAIN Gas Train Drawing C Parts List ITEM# PART# PART DESCRIPTION TUBE, VENT GAS VALVE FITTING,ADAPTER FEMALE SWIVEL X /2 MPT 3 A C PIPING, VALVE SHIELD SG, SGC, SG8F A80320-C PIPING, VALVE SHIELD SGM 24V FITTING, ELBOW MALE FLARE X MPT 5 P SCREW, 8-32 X /4 HEX HEAD SLOTTED ZN 6 P NIPPLE, BLACK /2 NPT X FITTING, ADAPTER MALE FLARE X /2 FPT FITTING,GAS RESTRICTOR /2"NPT CE 3.25MM (UNREGULATED ONLY) 8 A80300 PIPING, VALVE SHIELD SG4T 9 A COUPLING, GAS SUPPLY SHORT SG, MKG (PRIOR TO 2/05: USE A802903) VALVE, GAS SUPPLY SHUTOFF TUBING, FLEXIBLE WITH FITTINGS 6 GAS SGC, (SG PRIOR TO 2/05) TUBING, FLEXIBLE WITH FITTINGS 22 GAS (SG AFTER 2/05) TUBING, FLEXIBLE WITH FITTINGS 28 GAS SGM, SG8F 2 P NIPPLE, BLACK /2 NPT CL 3 B PIPING, GAS INLET MANIFOLD WELDMENT SG4T 4 P ELBOW, BLACK STREET 90 /2 NPT 6 L20-22 Rev 4 (06/06)

17 Gas Train Drawing C L20-22 Rev 4 (06/06) 7

18 Gas Train Drawing C2 Parts List ITEM# PART# PART DESCRIPTION C VALVE, GAS VR V FAST NAT SG C VALVE, GAS VR V FAST LP SG C VALVE, GAS VR V FAST CE NAT SG C VALVE, GAS VR V FAST CE LP SG C VALVE, GAS VR V FAST CE UNREGULATED NAT SG C VALVE, GAS VR8304M 24V FAST NAT SGM C VALVE, GAS VR8304M 24V FAST LP SGM C VALVE, GAS VS820 NAT SG, SGC, SG8F C VALVE, GAS VS820 LP SG, SGC, SG8F C VALVE, GAS U7000 CE NAT SG, SGC, SG8F C VALVE, GAS U7000 CE LP SG, SGC, SG8F C VALVE, GAS U7000 CE UNREGULATED SG, SGC, SG8F FITTING, TEST PRESSURE PLUG 5 6 A A PIPING, PILOT BRACKET SG4 SG4R SG8 PIPING, PILOT BRACKET WITH TAB SG4 SG4R SG8 A A PIPING, PILOT BRACKET SG4T PIPING, PILOT BRACKET WITH TAB SG4T 7 A PIPING, PILOT BRACKET MOUNT SGM PILOT, INLINE EI NAT.5 PILOT, INLINE EI NAT 2.98 PILOT, REVERSE STANDING NAT SG PILOT, INLINE EI LP.5 PILOT, INLINE EI LP 2.98 PILOT, REVERSE STANDING LP SG TUBE, FLEXIBLE WITHOUT FITTINGS 8 X /4 OD SG, SG8F, SGC 6090 TUBE, FLEXIBLE WITHOUT FITTINGS 8 X /4 OD 3/4 STR SGM TUBE, FLEXIBLE WITHOUT FITTINGS 30 X /4 OD 3/4 STR SGM24/ SCREW, 0-32 X /4 HEX HEAD SST SCREW, 0-32 X /2 HEX HEAD SST THERMOPILE, MILLIVOLT 5 P THERMOCOUPLE T A PIPING, PILOT BRACKET ADD-ON SG CE 7 PP373 NUT, HEX KEP 0-32 ZN VALVE, SOLENOID 24VAC 9 A PIPING, TUBING SCB SG 20 P FITTING, COMPRESSION ELBOW BRASS /4TU X /8MPT 2 PP0934 FITTING, COMPRESSION BRASS STRAIGHT /4TU X /8MPT TUBE, FLEXIBLE WITHOUT FITTINGS 6 X /4 OD ORIFICE, PILOT RUNNER TUBE #52 NAT SG4, SG4R, SG4T ORIFICE, PILOT RUNNER TUBE #68 LP SG ORIFICE, PILOT RUNNER TUBE #50 NAT SG8 24 A C CONTROL BOX, PILOT ORIFICE RETAINING BRACKET SG4 25 A C CONTROL BOX, PILOT ORIFICE RETAINING BRACKET SG4T LH 26 A C CONTROL BOX, PILOT ORIFICE RETAINING BRACKET SG4T RH 27 PP0023 SCREW, 0-24 X 3/8 SELF TAPPING 28A B WIRING, IGNITION CABLE WITH GROUND WRAP 20" SG* 28B B WIRING, IGNITION CABLE WITH GROUND WRAP 23" SGM* 8 L20-22 Rev 4 (06/06)

19 Gas Train Drawing C2 L20-22 Rev 4 (06/06) 9

20 D) GAS CONVERSION KITS Gas Conversion Kits Quick Reference COVERING ALL COUNTRIES EXCEPT: Turkey, Switzerland, Slovenia, Slavakia, Spain, Romania, Bulgaria, Czech Republic, England, Scotland, Wales, Hungary, Ireland, Luxembourg, Poland, Portugal, France, Germany, South Korea, Australia, Belgium, Cyprus, Malta, Austria, Denmark, Estonia, Finland, Greece, Italy, Latvia, Lithuania, Norway, Sweden For these countries see parts lists D5, D6, D7, or D8 BURNER TYPE WIRE FACED BURNERS SLOT FACED BURNERS NAT TO LP PARTS LIST LP TO NAT PARTS LIST NAT TO LP PARTS LIST LP TO NAT PARTS LIST SG4 B C D2 B75008-C D2 B C D B C D SG4R B C D2 B C D2 B C D B C D SG4T B C D2 B C D2 B C D B80432-C D SG8 B C D2 B75008-C D2 B C D B C D SG4 DI B C D2 B75008-C D2 N/A N/A SG4R DI B C D2 B C D2 B C D B C D SG4T DI B C D2 B C D2 N/A N/A SG8DI B C D2 B75008-C D2 N/A N/A SGC SHORT FLUE N/A N/A B C D3 B C D3 SGC TALL FLUE (PRIOR TO 5/03) SG8F N/A N/A N/A N/A B C B C D3 D B C B C D3 D BURNER TYPE MILLIVOLT SYSTEM, HONEYWELL VS820 GAS VALVE 24VAC SYSTEM, HONEYWELL VR8204 GAS VALVE (VR8304M MEGA) SLOT FACED BURNERS WIRE FACED OR SCB BURNERS NAT TO LP PARTS LIST LP TO NAT PARTS LIST NAT TO LP PARTS LIST LP TO NAT PARTS LIST SG4 B C D2 B C D2 B C D B C D SG4R B75009-C D2 B C D2 B C D B C D SG4T B C D2 B C D2 B C D B C D SG8 B C D2 B C D2 B C D B C D SGM824 B C D4 B C D4 N/A N/A SGM24 B C D4 B C D4 N/A N/A SGM34 B C D4 B C D4 N/A N/A 20 L20-22 Rev 4 (06/06)

21 Gas Conversion Kits Simple Instructions Drawing D L20-22 Rev 4 (06/06) 2

22 Gas Conversion Kits Slot Face Burners Parts List D SLOT FACED BURNERS NATURAL TO LP ITEM # MODELS VALVE PART # PART DESCRIPTION QTY SG4,SG8F VS820 B C GAS CONV KIT SLOT FACED NAT TO LP VS820 SG4 SG4R, SG4RDI VS820 B C GAS CONV KIT SLOT FACED NAT TO LP VS820 SG4R SG4T VS820 B C GAS CONV KIT SLOT FACED NAT TO LP VS820 SG4T SG8 VS820 B C GAS CONV KIT SLOT FACED NAT TO LP VS820 SG8 SG4 VR8204 B C GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG4 SG4R VR8204 B C GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG4R SG4T VR8204 B C GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG4T SG8 VR8204 B C GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG8 SG4, SG8F VS820/VR8204 P ORIFICE TIP #53 DIA 4 A SG4R, SG4RDI VS820/VR8204 P ORIFICE TIP /6 DIA 4 SG4T VS820/VR8204 A75370 ORIFICE TIP.45mm DIA 4 SG8 VS820/VR8204 P ORIFICE TIP #53 DIA 5 B SG4, SG8F, SG8, SG4R, SG4RDI SG4T VS820 VS GAS VALVE CONV KIT VS820 NAT TO LP GAS VALVE CONV KIT VS820 NAT TO LP 2 SG4, SG8, SG4R VR8204 PP4 GAS VALVE CONV KIT VR8204 NAT TO LP SG4T VR8204 PP4 GAS VALVE CONV KIT VR8204 NAT TO LP 2 SG4, SG8F, SG8, C SG4R, SG4RDI SG4T VS820/VR8204 VS820/VR8204 P P ORFICE PILOT SPUD LP.06 DIA ORFICE PILOT SPUD LP.06 DIA 2 D SG4, SG8F, SG4T SG4R, SG4RDI, SG8 VS820/VR8204 PP0426 GAS CONV NOTICE LABEL NAT TO LP SG4, SG8F, SG4T, E SG4R, SG4RDI SG8 VS820/VR8204 B C VS820/VR8204 B C BURNER SLOTTED-FACE 304-SST LP BURNER SLOTTED-FACE 304-SST LP 4 5 SLOT FACED BURNERS LP TO NATURAL ITEM # MODELS VALVE PART # PART DESCRIPTION QTY SG4,SG8F VS820 B C GAS CONV KIT SLOT FACED LP TO NAT VS820 SG4 SG4R, SG4RDI VS820 B C GAS CONV KIT SLOT FACED LP TO NAT VS820 SG4R SG4T VS820 B80432-C GAS CONV KIT SLOT FACED LP TO NAT VS820 SG4T SG8 VS820 B C GAS CONV KIT SLOT FACED LP TO NAT VS820 SG8 SG4 VR8204 B C GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG4 SG4R VR8204 B C GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG4R SG4T VR8204 B C GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG4T SG8 VR8204 B C GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG8 SG4, SG8F VS820/VR8204 P60734 ORIFICE TIP #4 DIA 4 A SG4R, SG4RDI VS820/VR8204 P ORIFICE TIP #38 DIA 4 SG4T VS820/VR8204 P ORIFICE TIP #43 DIA 4 SG8 VS820/VR8204 P60734 ORIFICE TIP #4 DIA 5 B SG4, SG8F, SG8, SG4R, SG4RDI SG4T VS820 VS GAS VALVE CONV KIT VS820 LP TO NAT GAS VALVE CONV KIT VS820 LP TO NAT 2 SG4, SG8, SG4R VR8204 PP39 GAS VALVE CONV KIT VR8204 LP TO NAT SG4T VR8204 PP39 GAS VALVE CONV KIT VR8204 LP TO NAT 2 SG4, SG8F, SG8, C SG4R, SG4RDI SG4T VS820/VR8204 VS820/VR8204 P P ORFICE PILOT SPUD NAT.022 DIA ORFICE PILOT SPUD NAT.022 DIA 2 D SG4, SG8F, SG4T SG4R, SG4RDI, SG8 VS820/VR8204 PP0427 GAS CONV NOTICE LABEL LP TO NAT SG4, SG8F, SG4T, E SG4R, SG4RDI VS820/VR8204 B C BURNER SLOTTED-FACE 304-SST NAT 4 SG8 VS820/VR8204 B C BURNER SLOTTED-FACE 304-SST NAT 5 22 L20-22 Rev 4 (06/06)

23 Gas Conversion Kits Wire Face Burners Parts List D2 Exploded Parts-SG Gas Models ITEM # MODELS VALVE PART # PART DESCRIPTION QTY SG4, SG4DI, SG8, SG8DI VS820 B C GAS CONV KIT NAT TO LP VS820 SG4,SG8 SG4R, SG4RDI VS820 B C GAS CONV KIT NAT TO LP VS820 SG4R SG4T, SG4TDI VS820 B C GAS CONV KIT NAT TO LP VS820 SG4T SG4, SG8 VR8204 B C GAS CONV KIT NAT TO LP VR8204 SG4,SG8 SG4R VR8204 B75009-C GAS CONV KIT NAT TO LP VR8204 SG4R SG4T VR8204 B C GAS CONV KIT NAT TO LP VR8204 SG4T SG4, SG4DI, SG8, SG8DI VS820/VR8204 P ORIFICE TIP #53 DIA 5 A SG4R, SG4RDI VS820/VR8204 P ORIFICE TIP /6 DIA 4 SG4T, SG4TDI VS820/VR8204 A75370 ORIFICE TIP.45mm DIA 4 B SG4, SG4DI, SG4R, SG4RDI, SG8, SG8DI SG4T, SG4TDI VS820 VS GAS VALVE CONV KIT VS820 NAT TO LP GAS VALVE CONV KIT VS820 NAT TO LP 2 SG4, SG8, SG4R VR8204 PP4 GAS VALVE CONV KIT VR8204 NAT TO LP SG4T VR8204 PP4 GAS VALVE CONV KIT VR8204 NAT TO LP 2 SG4, SG4DI, SG4R, C SG4RDI, SG8, SG8DI SG4T, SG4TDI VS820/VR8204 VS820/VR8204 P P ORFICE PILOT SPUD LP.06 DIA ORFICE PILOT SPUD LP.06 DIA 2 D SG4, SG4DI, SG4R, SG4T SG4TDI, SG4RDI, SG8, SG8DI VS820/VR8204 PP0426 GAS CONV NOTICE LABEL NAT TO LP ITEM # MODELS VALVE PART # PART DESCRIPTION QTY A B C D WIRE FACED OR SCB BURNERS NATURAL TO LP WIRE FACED OR SCB BURNERS LP TO NATURAL SG4, SG4DI, SG8, SG8DI VS820 B75008-C GAS CONV KIT LP TO NAT VS820 SG4,SG8 SG4R, SG4RDI VS820 B C GAS CONV KIT LP TO NAT VS820 SG4R SG4T, SG4TDI VS820 B C GAS CONV KIT LP TO NAT VS820 SG4T SG4, SG8 VR8204 B C GAS CONV KIT LP TO NAT VR8204 SG4,SG8 SG4R VR8204 B C GAS CONV KIT LP TO NAT VR8204 SG4R SG4T VR8204 B C GAS CONV KIT LP TO NAT VR8204 SG4T SG4, SG4DI, SG8, SG8DI VS820/VR8204 P60734 ORIFICE TIP #4 DIA 5 SG4R, SG4RDI VS820/VR8204 P ORIFICE TIP #38 DIA 4 SG4T, SG4TDI VS820/VR8204 P ORIFICE TIP #43 DIA 4 SG4, SG4DI, SG4R, SG4RDI, SG8, SG8DI SG4T, SG4TDI VS820 VS GAS VALVE CONV KIT VS820 LP TO NAT GAS VALVE CONV KIT VS820 LP TO NAT 2 SG4, SG8, SG4R VR8204 PP39 GAS VALVE CONV KIT VR8204 LP TO NAT SG4T VR8204 PP39 GAS VALVE CONV KIT VR8204 LP TO NAT 2 SG4, SG4DI, SG4R, SG4RDI, SG8, SG8DI SG4T, SG4TDI VS820/VR8204 VS820/VR8204 P P ORFICE PILOT SPUD NAT.022 DIA ORFICE PILOT SPUD NAT.022 DIA 2 SG4, SG4DI, SG4R, SG4T SG4TDI, SG4RDI, SG8, SG8DI VS820/VR8204 PP0427 GAS CONV NOTICE LABEL LP TO NAT L20-22 Rev 4 (06/06) 23

24 Gas Conversion Kits SGC Parts List D3 SGC SLOT FACED BURNERS NATURAL TO LP ITEM # FLUE TYPE PART # PART DESCRIPTION QTY TALL/SHORT B C GAS CONVERSION KIT SLOT FACED NAT TO LP SGC A P ORIFICE TIP #53 DIA 3 B GAS VALVE CONVERSION KIT VS820 NAT TO LP C P ORFICE PILOT SPUD LP.06 DIA D PP0426 GAS CONVERSION NOTICE LABEL NAT TO LP E B C BURNER SLOTTED-FACE 304-SST LP 3 SGC SLOT FACED BURNERS LP TO NATURAL ITEM # FLUE TYPE PART # PART DESCRIPTION QTY SHORT B C GAS CONVERSION KIT SLOT FACED LP TO SHORT FLUE NAT SGC TALL (PRIOR TO 05/03) B C GAS CONVERSION KIT SLOT FACED LP TO TALL FLUE NAT SGC A SHORT P ORIFICE TIP #43 DIA 3 TALL (PRIOR TO 05/03) P ORIFICE TIP #42 DIA 3 B TALL/SHORT GAS VALVE CONVERSION KIT VS820 LP TO NAT C TALL/SHORT P ORFICE PILOT SPUD NAT.022 DIA D TALL/SHORT PP0427 GAS CONVERSION NOTICE LABEL LP TO NAT E TALL/SHORT B C BURNER SLOTTED-FACE 304-SST NAT 3 24 L20-22 Rev 4 (06/06)

25 Gas Conversion Kits SGM Parts List D4 SGM WIRE FACED BURNERS NATURAL TO LP Exploded Parts-SG Gas Models ITEM # MODELS PART # PART DESCRIPTION QTY SGM824 B C GAS CONVERSION KIT NAT TO LP WITH SCB SGM824 SGM24 B C GAS CONVERSION KIT NAT TO LP WITH SCB SGM24 SGM34 B C GAS CONVERSION KIT NAT TO LP WITH SCB SGM34 SGM824 P ORIFICE TIP /6 DIA 4 A SGM24 P ORIFICE TIP #53 DIA 6 SGM34 P ORIFICE TIP #53 DIA 8 B SGM824, SGM24, SGM34 PP4 GAS VALVE CONVERSION KIT VR8204 NAT TO LP C SGM824, SGM24, SGM34 P ORFICE PILOT SPUD LP.06 DIA D SGM824, SGM24, SGM34 PP0426 GAS CONVERSION NOTICE LABEL NAT TO LP SGM824 A C BURNER COLLAR LP FULL RIGHT-HAND SGM824 F SGM24 A C BURNER COLLAR LP FULL RIGHT-HAND SGM24 SGM34 A C BURNER COLLAR LP FULL RIGHT-HAND SGM34 SGM824 A C BURNER COLLAR LP FULL LEFT-HAND SGM824 G SGM24 A C BURNER COLLAR LP FULL LEFT-HAND SGM24 SGM34 A80349-C BURNER COLLAR LP FULL LEFT-HAND SGM34 SGM WIRE FACED BURNERS LP TO NATURAL ITEM # MODELS PART # PART DESCRIPTION QTY SGM824 B C GAS CONVERSION KIT LP TO NAT WITH SCB SGM824 SGM24 B C GAS CONVERSION KIT LP TO NAT WITH SCB SGM24 SGM34 B C GAS CONVERSION KIT LP TO NAT WITH SCB SGM34 SGM824 P ORIFICE TIP #40 DIA 4 A SGM24 P ORIFICE TIP #42 DIA 6 SGM34 P ORIFICE TIP #42 DIA 8 B SGM824, SGM24, SGM34 PP39 GAS VALVE CONVERSION KIT VR8204 LP TO NAT C SGM824, SGM24, SGM34 P ORFICE PILOT SPUD NAT.022 DIA D SGM824, SGM24, SGM34 PP0427 GAS CONVERSION NOTICE LABEL LP TO NAT SGM824 A BURNER SHIELD NAT RIGHT-HAND SGM824 F SGM24 A BURNER SHIELD NAT RIGHT-HAND SGM24 SGM34 A8037 BURNER SHIELD NAT RIGHT-HAND SGM34 SGM824 A80370 BURNER SHIELD NAT LEFT-HAND SGM824 G SGM24 A BURNER SHIELD NAT LEFT-HAND SGM24 SGM34 A BURNER SHIELD NAT LEFT-HAND SGM34 L20-22 Rev 4 (06/06) 25

26 Gas Conversion Kits Slot Face Burners (CE) Parts List D5 SLOT FACED BURNERS NATURAL TO LP (CE) Covering countries: Turkey, Switzerland, Slovenia, Slovakia, Spain, Romania, Bulgaria, Czech Republic, England, Scotland, Wales, Hungary, Ireland, Luxembourg, Poland, Portugal, France, Germany, Belgium Countries not covered:. Country does not use natural gas: Cyprus, Malta 2. Not Approved for use with LP: Austria, Denmark, Estonia, Finland, Greece, Italy, Latvia, Lithuania, Norway, Sweden 3. Not Approved for use with Slot Faced Burners: Australia, South Korea ITEM # MODELS COMMENTS VALVE PART # PART DESCRIPTION QTY SG4, SG4DI, SG8F U7000/VR8204 P ORIFICE TIP #53 DIA 4 A SG8, SG8DI U7000/VR8204 P ORIFICE TIP #53 DIA 5 SG4R, SG4RDI U7000/VR8204 P ORIFICE TIP /6 DIA 4 SG4T, SG4TDI U7000/VR8204 A75370 ORIFICE TIP.45mm DIA 4 B SG4, SG4DI, SG4R, SG4RDI, SG8F, SG8, SG8DI SG4T, SG4TDI NOT BELGIUM NOT BELGIUM U7000 U7000 P P REGULATOR KIT U7000 LP REGULATOR KIT U7000 LP 2 SG4, SG4R NOT BELGIUM SG8 NOT BELGIUM VR8204 PP4 GAS VALVE CONV KIT VR8204 NAT TO LP SG4T NOT BELGIUM VR8204 PP4 GAS VALVE CONV KIT VR8204 NAT TO LP 2 SG4, SG4DI, SG4R, C SG4RDI, SG8F, U7000/VR8204 P ORFICE PILOT SPUD LP.06 DIA SG8, SG8DI SG4T, SG4TDI U7000/VR8204 P ORFICE PILOT SPUD LP.06 DIA 2 SG4, SG8F, SG4T E SG4R, SG4RDI U7000/VR8204 B C BURNER SLOTTED-FACE 304-SST LP 4 SG8 U7000/VR8204 B C BURNER SLOTTED-FACE 304-SST LP 5 SG4, SG4DI, SG4R, SG4RDI, SG8F, BELGIUM ONLY U GAS VALVE, U7000 MILLIVOLT CE LP H SG8, SG8DI SG4T, SG4TDI BELGIUM ONLY U GAS VALVE, U7000 MILLIVOLT CE LP 2 SG4, SG8, SG4R BELGIUM ONLY VR C GAS VALVE, VR V FAST CE LP SG4T BELGIUM ONLY VR C GAS VALVE, VR V FAST CE LP 2 SLOT FACED BURNERS LP TO NATURAL (CE) Covering countries: Turkey, Switzerland, Slovenia, Slovakia, Spain, Romania, Bulgaria, Czech Republic, England, Scotland, Wales, Hungary, Ireland, Luxembourg, Poland, Portugal, France, Germany, Belgium Countries not covered:. Country does not use natural gas: Cyprus, Malta 2. Not Approved for use with LP: Austria, Denmark, Estonia, Finland, Greece, Italy, Latvia, Lithuania, Norway, Sweden 3. Not Approved for use with Slot Faced Burners: Australia, South Korea ITEM # MODELS COMMENTS VALVE PART # PART DESCRIPTION QTY SG4, SG4DI, SG8F U7000/VR8204 P60734 ORIFICE TIP #4 DIA 4 A SG8, SG8DI U7000/VR8204 P60734 ORIFICE TIP #4 DIA 5 SG4R, SG4RDI U7000/VR8204 P ORIFICE TIP #38 DIA 4 SG4T, SG4TDI U7000/VR8204 P ORIFICE TIP #43 DIA 4 SG4, SG4DI, SG4R, NOT BELGIUM SG4R, SG4RDI U7000 P60755 REGULATOR KIT U NAT SG8, SG8DI NOT BELGIUM B SG4T, SG4TDI NOT BELGIUM U7000 P60755 REGULATOR KIT U NAT 2 SG4, SG4R NOT BELGIUM SG8 NOT BELGIUM VR8204 PP39 GAS VALVE CONV KIT VR8204 LP TO NAT SG4T NOT BELGIUM VR8204 PP39 GAS VALVE CONV KIT VR8204 LP TO NAT 2 SG4, SG4DI, SG4R, C SG4R, SG4RDI U7000/VR8204 P ORFICE PILOT SPUD NAT.022 DIA SG8, SG8DI SG4T, SG4TDI U7000/VR8204 P ORFICE PILOT SPUD NAT.022 DIA 2 SG4, SG8F, SG4T E SG4R, SG4RDI U7000/VR8204 B C BURNER SLOTTED-FACE 304-SST NAT 4 SG8 U7000/VR8204 B C BURNER SLOTTED-FACE 304-SST NAT 5 H SG4, SG4DI, SG4R, SG4RDI, SG8, SG8DI SG4T, SG4TDI BELGIUM ONLY BELGIUM ONLY U7000 U GAS VALVE, U7000 MILLIVOLT CE UNREGULATED GAS VALVE, U7000 MILLIVOLT CE UNREGULATED 2 SG4, SG8, SG4R BELGIUM ONLY VR C GAS VALVE, VR V FAST CE UNREGULATED SG4T BELGIUM ONLY VR C GAS VALVE, VR V FAST CE UNREGULATED 2 SG4, SG4DI BELGIUM ONLY U7000/VR FITTING,GAS RESTRICTOR 3/4"NPT 4.83MM I SG4R, SG4RDI BELGIUM ONLY U7000/VR FITTING,GAS RESTRICTOR 3/4"NPT 5.8MM SG8, SG8DI BELGIUM ONLY U7000/VR FITTING,GAS RESTRICTOR 3/4"NPT 5.6MM SG4T, SG4TDI BELGIUM ONLY U7000/VR FITTING,GAS RESTRICTOR /2"NPT 3.25MM 2 SG4, SG4DI FRANCE, GERMANY ONLY U7000/VR8204 P ORIFICE TIP #37 DIA 4 J SG8, SG8DI FRANCE, GERMANY ONLY U7000/VR8204 P ORIFICE TIP #38 DIA 5 SG4R, SG4RDI FRANCE, GERMANY ONLY U7000/VR8204 P ORIFICE TIP #36 DIA 4 SG4T, SG4TDI FRANCE, GERMANY ONLY U7000/VR8204 P60734 ORIFICE TIP #4 DIA 4 26 L20-22 Rev 4 (06/06)

27 Gas Conversion Kits Wire Face Burners (CE and Australia) Parts List D6 Exploded Parts-SG Gas Models WIRE FACED OR SCB BURNERS NATURAL TO LP (CE, AUSTRALIA, SOUTH KOREA) Covering countries: Turkey, Switzerland, Slovenia, Slovakia, Spain, Romania, Bulgaria, Czech Republic, England, Scotland, Wales, Hungary, Ireland, Luxembourg, Poland, Portugal, France, Germany, South Korea, Australia, Belgium Countries not covered:. Country does not use natural gas: Cyprus, Malta 2. Not Approved for use with LP: Austria, Denmark, Estonia, Finland, Greece, Italy, Latvia, Lithuania, Norway, Sweden ITEM # MODELS COMMENTS VALVE PART # PART DESCRIPTION QTY SG4, SG4DI U7000/VR8204 P ORIFICE TIP #53 DIA 4 SG8, SG8DI NOT SOUTH KOREA U7000/VR8204 P ORIFICE TIP #53 DIA 5 A SG4R, SG4RDI U7000/VR8204 P ORIFICE TIP /6 DIA 4 SG4T, SG4TDI NOT SOUTH KOREA, AUSTRALIA U7000/VR8204 A75370 ORIFICE TIP.45mm DIA 4 SG4T, SG4TDI AUSTRALIA ONLY U7000/VR8204 P ORIFICE TIP #55 DIA 4 SG4, SG4DI, NOT BELGIUM SG4R, SG4RDI U7000 P REGULATOR KIT U7000 LP SG8, SG8DI NOT SOUTH KOREA, BELGIUM B SG4T, SG4TDI NOT SOUTH KOREA, BELGIUM U7000 P REGULATOR KIT U7000 LP 2 SG4, SG4R NOT BELGIUM SG8 NOT SOUTH KOREA, BELGIUM VR8204 PP4 GAS VALVE CONV KIT VR8204 NAT TO LP SG4T NOT SOUTH KOREA, BELGIUM VR8204 PP4 GAS VALVE CONV KIT VR8204 NAT TO LP 2 SG4, SG4DI, C SG4R, SG4RDI U7000/VR8204 P ORFICE PILOT SPUD LP.06 DIA SG8, SG8DI NOT SOUTH KOREA SG4T, SG4TDI NOT SOUTH KOREA U7000/VR8204 P ORFICE PILOT SPUD LP.06 DIA 2 H SG4, SG4DI, SG4R, SG4RDI, SG8, SG8DI SG4T, SG4TDI BELGIUM ONLY BELGIUM ONLY U7000 U GAS VALVE, U7000 MILLIVOLT CE LP GAS VALVE, U7000 MILLIVOLT CE LP 2 SG4, SG8, SG4R BELGIUM ONLY VR C GAS VALVE, VR V FAST CE LP SG4T BELGIUM ONLY VR C GAS VALVE, VR V FAST CE LP 2 WIRE FACED OR SCB BURNERS LP TO NATURAL (CE, AUSTRALIA, SOUTH KOREA) Covering countries: Turkey, Switzerland, Slovenia, Slovakia, Spain, Romania, Bulgaria, Czech Republic, England, Scotland, Wales, Hungary, Ireland, Luxembourg, Poland, Portugal, France, Germany, South Korea, Australia, Belgium Countries not covered:. Country does not use natural gas: Cyprus, Malta 2. Not Approved for use with LP: Austria, Denmark, Estonia, Finland, Greece, Italy, Latvia, Lithuania, Norway, Sweden ITEM # MODELS COMMENTS VALVE PART # PART DESCRIPTION QTY SG4, SG4DI U7000/VR8204 P60734 ORIFICE TIP #4 DIA 4 SG8, SG8DI NOT SOUTH KOREA, AUSTRALIA U7000/VR8204 P60734 ORIFICE TIP #4 DIA 5 A SG8, SG8DI AUSTRALIA ONLY U7000/VR8204 P ORIFICE TIP #42 DIA 5 SG4R, SG4RDI U7000/VR8204 P ORIFICE TIP #38 DIA 4 SG4T, SG4TDI NOT SOUTH KOREA, AUSTRALIA U7000/VR8204 P ORIFICE TIP #43 DIA 4 SG4T, SG4TDI AUSTRALIA ONLY U7000/VR8204 P ORIFICE TIP #44 DIA 4 SG4, SG4DI, NOT BELGIUM SG4R, SG4RDI U7000 P60755 REGULATOR KIT U NAT SG8, SG8DI NOT SOUTH KOREA, BELGIUM B SG4T, SG4TDI NOT SOUTH KOREA, BELGIUM U7000 P60755 REGULATOR KIT U NAT 2 SG4, SG4R NOT BELGIUM SG8 NOT SOUTH KOREA, BELGIUM VR8204 PP39 GAS VALVE CONV KIT VR8204 LP TO NAT SG4T NOT SOUTH KOREA, BELGIUM VR8204 PP39 GAS VALVE CONV KIT VR8204 LP TO NAT 2 SG4, SG4DI, C SG4R, SG4RDI U7000/VR8204 P ORFICE PILOT SPUD NAT.022 DIA SG8, SG8DI NOT SOUTH KOREA SG4T, SG4TDI U7000/VR8204 P ORFICE PILOT SPUD NAT.022 DIA 2 H SG4, SG4DI, SG4R, SG4RDI, SG8, SG8DI SG4T, SG4TDI BELGIUM ONLY BELGIUM ONLY U7000 U GAS VALVE, U7000 MILLIVOLT CE UNREGULATED GAS VALVE, U7000 MILLIVOLT CE UNREGULATED 2 SG4, SG8, SG4R BELGIUM ONLY VR C GAS VALVE, VR V FAST CE UNREGULATED SG4T BELGIUM ONLY VR C GAS VALVE, VR V FAST CE UNREGULATED 2 SG4, SG4DI BELGIUM ONLY U7000/VR FITTING,GAS RESTRICTOR 3/4"NPT 4.83MM I SG4R, SG4RDI BELGIUM ONLY U7000/VR FITTING,GAS RESTRICTOR 3/4"NPT 5.8MM SG8, SG8DI BELGIUM ONLY U7000/VR FITTING,GAS RESTRICTOR 3/4"NPT 5.6MM SG4T, SG4TDI BELGIUM ONLY U7000/VR FITTING,GAS RESTRICTOR /2"NPT 3.25MM 2 SG4, SG4DI FRANCE, GERMANY ONLY U7000/VR8204 P ORIFICE TIP #37 DIA 4 J SG8, SG8DI FRANCE, GERMANY ONLY U7000/VR8204 P ORIFICE TIP #38 DIA 5 SG4R, SG4RDI FRANCE, GERMANY ONLY U7000/VR8204 P ORIFICE TIP #36 DIA 4 SG4T, SG4TDI FRANCE, GERMANY ONLY U7000/VR8204 P60734 ORIFICE TIP #4 DIA 4 L20-22 Rev 4 (06/06) 27

28 Gas Conversion Kits SGC (CE) Parts List D7 SGC SLOT FACED BURNERS NATURAL TO LP (CE) Covering countries: Turkey, Switzerland, Slovenia, Slovakia, Spain, Romania, Bulgaria, Czech Republic, England, Scotland, Wales, Hungary, Ireland, Luxembourg, Poland, Portugal, France, Germany, Belgium Countries not covered:. Country does not use natural gas: Cyprus, Malta 2. Not Approved for use with LP: Austria, Denmark, Estonia, Finland, Greece, Italy, Latvia, Lithuania, Norway, Sweden 3. Not Approved for use with Slot Faced Burners: Australia, South Korea ITEM # COMMENTS PART # PART DESCRIPTION QTY A P ORIFICE TIP #54 DIA 3 B NOT BELGIUM P REGULATOR KIT U7000 LP C P ORFICE PILOT SPUD LP.06 DIA E B C BURNER SLOTTED-FACE 304-SST LP 3 H BELGIUM ONLY GAS VALVE, U7000 MILLIVOLT CE LP SGC SLOT FACED BURNERS LP TO NATURAL (CE) Covering countries: Turkey, Switzerland, Slovenia, Slovakia, Spain, Romania, Bulgaria, Czech Republic, England, Scotland, Wales, Hungary, Ireland, Luxembourg, Poland, Portugal, France, Germany, Belgium Countries not covered:. Country does not use natural gas: Cyprus, Malta 2. Not Approved for use with LP: Austria, Denmark, Estonia, Finland, Greece, Italy, Latvia, Lithuania, Norway, Sweden 3. Not Approved for use with Slot Faced Burners: Australia, South Korea ITEM # COMMENTS PART # PART DESCRIPTION QTY A P ORIFICE TIP #43 DIA 3 B NOT BELGIUM P60755 REGULATOR KIT U NAT C P ORFICE PILOT SPUD NAT.022 DIA E B C BURNER SLOTTED-FACE 304-SST NAT 4 H BELGIUM ONLY GAS VALVE, U7000 MILLIVOLT CE UNREGULATED I BELGIUM ONLY CONTACT FACTORY FITTING,GAS RESTRICTOR 3/4"NPT 4.00MM J FRANCE, GERMANY ONLY P ORIFICE TIP #40 DIA 3 28 L20-22 Rev 4 (06/06)

29 Gas Conversion Kits SGM (CE) Parts List D8 SGM WIRE FACED BURNERS NATURAL TO LP (CE) Exploded Parts-SG Gas Models Covering countries: Turkey, Switzerland, Slovenia, Slovakia, Spain, Romania, Bulgaria, Czech Republic, England, Scotland, Wales, Hungary, Ireland, Luxembourg, Poland, Portugal, France, Germany Countries not covered:. Country does not use natural gas: Cyprus, Malta 2. Not Approved for use with LP: Austria, Denmark, Estonia, Finland, Greece, Italy, Latvia, Lithuania, Norway, Sweden 3. Models not Approved for use with LP or Natural gas: Australia, South Korea 4. No Gas Valve available for Unregulated Natural gas: Beglium ITEM # MODELS COMMENTS PART # PART DESCRIPTION QTY SGM824 P ORIFICE TIP /6 DIA 4 A SGM24 A75370 ORIFICE TIP.45mm DIA 6 SGM34 PP0859 ORIFICE TIP.5mm DIA 8 B SGM824, SGM24, SGM34 PP4 GAS VALVE CONV KIT VR8204 NAT TO LP C SGM824, SGM24, SGM34 P ORFICE PILOT SPUD LP.06 DIA SGM824 A C BURNER COLLAR LP FULL RIGHT-HAND SGM824 F SGM24 A C BURNER COLLAR LP FULL RIGHT-HAND SGM24 SGM34 A C BURNER COLLAR LP FULL RIGHT-HAND SGM34 SGM824 A C BURNER COLLAR LP FULL LEFT-HAND SGM824 G SGM24 A C BURNER COLLAR LP FULL LEFT-HAND SGM24 SGM34 A80349-C BURNER COLLAR LP FULL LEFT-HAND SGM34 SGM WIRE FACED BURNERS LP TO NATURAL (CE) Covering countries: Turkey, Switzerland, Slovenia, Slovakia, Spain, Romania, Bulgaria, Czech Republic, England, Scotland, Wales, Hungary, Ireland, Luxembourg, Poland, Portugal, France, Germany Countries not covered:. Country does not use natural gas: Cyprus, Malta 2. Not Approved for use with LP: Austria, Denmark, Estonia, Finland, Greece, Italy, Latvia, Lithuania, Norway, Sweden 3. Models not Approved for use with LP or Natural gas: Australia, South Korea 4. No Gas Valve available for Unregulated Natural gas: Beglium ITEM # MODELS COMMENTS PART # PART DESCRIPTION QTY SGM824 P ORIFICE TIP #40 DIA 4 A SGM24 P ORIFICE TIP #44 DIA 6 SGM34 P ORIFICE TIP #42 DIA 8 B SGM824, SGM24, SGM34 PP39 GAS VALVE CONV KIT VR8204 LP TO NAT C SGM824, SGM24, SGM34 P ORFICE PILOT SPUD NAT.022 DIA SGM824 A BURNER SHIELD NAT RIGHT-HAND SGM824 F SGM24 A BURNER SHIELD NAT RIGHT-HAND SGM24 SGM34 A8037 BURNER SHIELD NAT RIGHT-HAND SGM34 SGM824 A80370 BURNER SHIELD NAT LEFT-HAND SGM824 G SGM24 A BURNER SHIELD NAT LEFT-HAND SGM24 SGM34 A BURNER SHIELD NAT LEFT-HAND SGM34 SGM824 FRANCE, GERMANY ONLY P ORIFICE TIP #37 DIA 4 J SGM24 FRANCE, GERMANY ONLY P60734 ORIFICE TIP #4 DIA 6 SGM34 FRANCE, GERMANY ONLY P ORIFICE TIP #39 DIA 8 L20-22 Rev 4 (06/06) 29

30 E) FRYER CABINET Modular Cabinet Drawing E Parts List E(A) ITEM # PART # PART DESCRIPTION SEE PARTS LIST E(B) BASKET HANGER 2 SEE PARTS LIST E(B) CABINET FRONT BOTTOM BRACE A50902-C CABINET SIDE LEFT-HAND SG8F 3 A502-C CABINET SIDE LEFT-HAND SGC A5202-C CABINET SIDE LEFT-HAND SG4,SG4R,SG4T,SG8 A53602-C CABINET SIDE LEFT-HAND SGM824,SGM24,SGM34 A50904-C CABINET SIDE RIGHT-HAND SG8F 4 A504-C CABINET SIDE RIGHT-HAND SGC A5204-C CABINET SIDE RIGHT-HAND SG4,SG4R,SG4T,SG8 A53604-C CABINET SIDE RIGHT-HAND SGM824,SGM24,SGM34 A5020-C CABINET SIDE SUPPORT MODULAR SG4,SG4R,SG4T,SG8 5 A500-C CABINET SIDE SUPPORT SG8F A530-C CABINET SIDE BRACE SGC A53620-C CABINET SIDE SUPPORT MODULAR SGM824,SGM24,SGM34 6 SEE PARTS LIST E(B) CABINET BACK TOP 7 SEE PARTS LIST E(B) CABINET BACK BOTTOM A630-C CABINET FRONT SPACER SG8,SG8F,SGM824 A84600-C CABINET FRONT SPACER SG4,SG4R,SG4T 8A A84680-C CABINET FRONT SPACER SGC A85050-C CABINET FRONT SPACER SGM34 A85060-C CABINET FRONT SPACER SGM24 8B A C CABINET UPPER SUPPORT PAN HOLDER SG8F 8C A C CABINET LOWER SUPPORT PAN HOLDER SG8F 9 A C CABINET REAR JOINING STRIP TOP REAR SG TO SG 0 A C CABINET REAR JOINING STRIP REAR SGC TO SGC A C CABINET REAR JOINING STRIP BOTTOM REAR SG TO SG A BRACKET MAGNETIC CATCH A8470-C CABINET SLAM ACTION DOOR CATCH A C BRACKET MAGNETIC CATCH SGM24,SGM34 2 A C CABINET BOTTOM BRACE JOINING STRIP SGC 3 A C CABINET UPPER FRONT JOINING TAB SGC 4 A C CABINET CHANNEL JOINING STRIP SG TO SG, SGM TO SGM A C CABINET CHANNEL JOINING STRIP SGC TO SGC 5 A C FLUE REAR HEAT DEFLECTOR SG4*,SG8 6 SEE PARTS LIST E(B) FRONT PANEL HEAT SHIELD DEFLECTOR 7 A36702-C FRONT PANEL END CAP LH/RH SG*, SGM* A C FRONT PANEL END CAP LH/RH SG8F 8 SEE PARTS LIST E(B) SPLASH BACK 9 A C PAN HOLDER UPPER COVER SG8F 20 A66302-C FILTER DRAIN LINE CABINET COVER SST 2 SEE PARTS LIST E(B) DOOR ASSEMBLY 22 SEE PARTS LIST E(C) FRONT PANEL TOP DECK ASSEMBLY B38080 B HINGE WELDMENT LOWER RIGHT HAND SG* HINGE WELDMENT UPPER RIGHT HAND SG* B B HINGE WELDMENT LOWER LEFT HAND SG* HINGE WELDMENT UPPER LEFT HAND SG* 25 B C PAN HOLDER SHELF WELDMENT SG8F B FILTER PAN GUIDE LEFT HAND SFD 26 B FILTER PAN GUIDE LEFT HAND SFSG4,SFSG8 B FILTER PAN GUIDE LEFT HAND SGM824 B FILTER PAN GUIDE LEFT HAND SGM24,SGM34 B FILTER PAN GUIDE RIGHT HAND SFD 27 B FILTER PAN GUIDE RIGHT HAND SFSG4,SFSG8 B FILTER PAN GUIDE RIGHT HAND SGM824 B FILTER PAN GUIDE RIGHT HAND SGM24,SGM STUD SPLASH BACK SCREW ON LATCH SLAM ACTION SG4,SG4R,SG4T,SG8 PP006 HANDLE DOOR RECESSED PLASTIC 30 P MAGNETIC CATCH STANDARD 3 P HOLE PLUG -/2" CHROME PLATED 32 SEE DRAWING S FRONT CASTERS/LEGS 33 SEE DRAWING S REAR CASTERS/LEGS 34 PP0023 SCREW 0-24 X 3/8 SELF TAPPING 35 P SCREW 0-24 X /2 SELF TAPPING 36 P SCREW /4-20 X 5/8 HEX HEAD CAP ZN BOLT /4-20 X 3/8 HEX FLANGE HEAD SCREW 0-24 X 3/8 TRUSS HEAD SLOTTED LOCKING SST 39 P NUT HEX (KEP) 0-24 ZN 40 NOT SHOWN SEE PARTS LIST E(C) CABINET ASSEMBLY 30 L20-22 Rev 4 (06/06)

31 Modular Cabinet Drawing E L20-22 Rev 4 (06/06) 3

32 Modular Cabinet Drawing E Parts List E(B) ITEM # PART # PART DESCRIPTION A05402-C BASKET HANGER SG4,SG4R,SG4T A05404-C BASKET HANGER SG8 A05406-C BASKET HANGER EXTENDED SG4,SG4R,SG4T A05408-C BASKET HANGER EXTENDED SG8 A05502-C BASKET HANGER EXTRA HIGH SG4,SG4R,SG4T A05504-C BASKET HANGER EXTRA HIGH SG8 A05802-C BASKET HANGER SGC A06502-C BASKET HANGER SGM824 A06504-C BASKET HANGER SGM24 A06506-C BASKET HANGER SGM34 A2340-C CABINET FRONT BOTTOM BRACE SGC A23430-C CABINET FRONT BOTTOM BRACE SG4,SG4R,SG4T A23440-C CABINET FRONT BOTTOM BRACE SG8,SG8F 2 A23450-C CABINET FRONT BOTTOM BRACE SFSG4,SFSG4R,SFSG4T A23460-C CABINET FRONT BOTTOM BRACE SFSG8 A23560-C CABINET FRONT BOTTOM BRACE SGM34 A23570-C CABINET FRONT BOTTOM BRACE SGM24 A23580-C CABINET FRONT BOTTOM BRACE SGM824 A6350-C CABINET BACK TOP SGC TALL FLUE (PRIOR TO 05/2003) A6390-C CABINET BACK TOP SG4,SG4R,SG4T A63903-C CABINET BACK TOP SGBNB4 FLAT-TOP A63220-C CABINET BACK TOP SG8,SG8F 6 A C CABINET BACK TOP SGBNB8 FLAT-TOP A63290-C CABINET BACK TOP SGC SHORT FLUE (AFTER 05/2003) A63580-C CABINET BACK TOP SGM34 A C CABINET BACK TOP SGM24 A C CABINET BACK TOP SGM824 A6380-C CABINET BACK BOTTOM SG4,SG4R,SG4T A6320-C CABINET BACK BOTTOM SG8 A63250-C CABINET BACK BOTTOM SFSG4,SFSG4R,SFSG4T 7 A63260-C CABINET BACK BOTTOM SFSG8 A63270-C CABINET BACK BOTTOM SG8F A63590-C CABINET BACK BOTTOM SGM34 A63600-C CABINET BACK BOTTOM SGM24 A6360-C CABINET BACK BOTTOM SGM824 A C FRONT PANEL HEAT SHIELD DEFLECTOR SG4,SG4R,SG4T A C FRONT PANEL HEAT SHIELD DEFLECTOR SG8 6 A36720-C FRONT PANEL HEAT SHIELD SG8F A C FRONT PANEL HEAT SHIELD DEFLECTOR SGM824 A C FRONT PANEL HEAT SHIELD DEFLECTOR SGM24 A C FRONT PANEL HEAT SHIELD DEFLECTOR SGM34 A C SPLASH BACK SG4,SG4R,SG4T A C SPLASH BACK SG8,SG8F A C SPLASH BACK SGBNB4 A C SPLASH BACK SGBNB8 8 A40802-C SPLASH BACK SGC TALL FLUE (PRIOR TO 05/2003) A C SPLASH BACK SGC SHORT FLUE A C SPLASH BACK SGM824 A C SPLASH BACK SGM24 A C SPLASH BACK SGM34 B23040-C DOOR ASSEMBLY SG4,SG4R,SG4T B C DOOR ASSEMBLY SG8,SGM824 B C DOOR ASSEMBLY SG8F 2 B C DOOR ASSEMBLY SGC B C DOOR ASSEMBLY SGM24 B23046-C DOOR ASSEMBLY SGM34 B C DOOR ASSEMBLY SLAM ACTION SG8 B C DOOR ASSEMBLY SLAM ACTION SG4,SG4R,SG4T 32 L20-22 Rev 4 (06/06)

33 Modular Cabinet Drawing E Parts List E(C) ITEM # PART # PART DESCRIPTION B C FRONT PANEL TOP DECK WELDMENT SG4,SG4R,SG4T B C FRONT PANEL TOP DECK WELDMENT SG8 B C FRONT PANEL TOP DECK WELDMENT SGC B C FRONT PANEL TOP DECK WELDMENT SG8F B C FRONT PANEL TOP DECK ASSEMBLY SG4-2 B C FRONT PANEL TOP DECK ASSEMBLY SG8-2 B C FRONT PANEL TOP DECK ASSEMBLY SG4/SG8 B C FRONT PANEL TOP DECK ASSEMBLY SG8/SG4 B C FRONT PANEL TOP DECK ASSEMBLY SGM824 B C FRONT PANEL TOP DECK ASSEMBLY SGM24 B C FRONT PANEL TOP DECK ASSEMBLY SGM34 B36336-C FRONT PANEL TOP DECK ASSEMBLY SGM824-2 B C FRONT PANEL TOP DECK ASSEMBLY SGM24-2 B C FRONT PANEL TOP DECK ASSEMBLY SGM34-2 B C FRONT PANEL TOP DECK ASSEMBLY SGM824/SGM24 B C FRONT PANEL TOP DECK ASSEMBLY SGM824/SGM34 B C FRONT PANEL TOP DECK ASSEMBLY SGM24/SGM34 B C FRONT PANEL TOP DECK ASSEMBLY SGM24/SGM824 B C FRONT PANEL TOP DECK ASSEMBLY SGM34/SGM824 B C FRONT PANEL TOP DECK ASSEMBLY SGM34/SGM24 B C FRONT PANEL TOP DECK ASSEMBLY SG4-3 B C FRONT PANEL TOP DECK ASSEMBLY SG4-2/SG8 22 B C FRONT PANEL TOP DECK ASSEMBLY SG4/SG8/SG4 B C FRONT PANEL TOP DECK ASSEMBLY SG8/SG4-2 B C FRONT PANEL TOP DECK ASSEMBLY SG4/SG8-2 B C FRONT PANEL TOP DECK ASSEMBLY SG8/SG4/SG8 B C FRONT PANEL TOP DECK ASSEMBLY SG8-2/SG4 B C FRONT PANEL TOP DECK ASSEMBLY SG8-3 B C FRONT PANEL TOP DECK ASSEMBLY SGM824-3 B C FRONT PANEL TOP DECK ASSEMBLY SG4-4 B C FRONT PANEL TOP DECK ASSEMBLY SG4-3/SG8 B C FRONT PANEL TOP DECK ASSEMBLY SG4-2/SG8/SG4 B C FRONT PANEL TOP DECK ASSEMBLY SG4/SG8/SG4-2 B C FRONT PANEL TOP DECK ASSEMBLY SG8/SG4-3 B C FRONT PANEL TOP DECK ASSEMBLY SG4-2/SG8-2 B C FRONT PANEL TOP DECK ASSEMBLY SG4/SG8/SG4/SG8 B C FRONT PANEL TOP DECK ASSEMBLY SG8/SG4-2/SG8 B C FRONT PANEL TOP DECK ASSEMBLY SG4/SG8-2/SG4 B C FRONT PANEL TOP DECK ASSEMBLY SG8/SG4/SG8/SG4 B36338-C FRONT PANEL TOP DECK ASSEMBLY SG8-2/SG4-2 B C FRONT PANEL TOP DECK ASSEMBLY SG8-3/SG4 B C FRONT PANEL TOP DECK ASSEMBLY SG8-2/SG4/SG8 B C FRONT PANEL TOP DECK ASSEMBLY SG8/SG4/SG8-2 B C FRONT PANEL TOP DECK ASSEMBLY SG4/SG8-3 B C FRONT PANEL TOP DECK ASSEMBLY SG8-4 B C FRONT PANEL TOP DECK ASSEMBLY SGM824-3/SGM34 B82270-C CABINET ASSEMBLY MODULAR ALL OPTIONS SG4,SG4R,SG4T B C CABINET ASSEMBLY MODULAR ALL OPTIONS SG8 B C CABINET ASSEMBLY MODULAR ALL OPTIONS SGBNB4 FLAT-TOP B C CABINET ASSEMBLY MODULAR ALL OPTIONS SGBNB8 FLAT-TOP 40 B C CABINET ASSEMBLY MODULAR ALL OPTIONS SGF4,SGF4R,SGF4T NOT SHOWN B C CABINET ASSEMBLY MODULAR ALL OPTIONS SGF8 (INCLUDES B82276-C CABINET ASSEMBLY MODULAR SGM34 ITEMS: 2-8 & B82277-C CABINET ASSEMBLY MODULAR SGM24 34) B82278-C CABINET ASSEMBLY MODULAR SGM824 B82440-C CABINET ASSEMBLY SGC TALL FLUE (PRIOR TO 05/2003) B C CABINET ASSEMBLY SGC SHORT FLUE B82450-C CABINET ASSEMBLY SG8F STANDARD B C CABINET ASSEMBLY SG8F ARTHUR TREACHER'S L20-22 Rev 4 (06/06) 33

34 Standard Cabinet Drawing E2 Parts List ITEM # PART # PART DESCRIPTION A52002-C CABINET SIDE LEFT-HAND SG4,SG4R,SG4T,SG8 2 A52004-C CABINET SIDE RIGHT-HAND SG4,SG4R,SG4T,SG A6350-C A63503-C A63520-C A C A84960-C A C A23520-C A C A05402-C A05404-C CABINET BACK SG4,SG4R,SG4T CABINET BACK SG8 CABINET BACK BOTTOM SG4,SG4R,SG4T CABINET BACK BOTTOM SG8 CABINET FRONT SPACER SG4,SG4R,SG4T CABINET FRONT SPACER SG8 CABINET FRONT BOTTOM BRACE SG4,SG4R,SG4T CABINET FRONT BOTTOM BRACE SG8 BASKET HANGER SG4,SG4R,SG4T BASKET HANGER SG8 8 A C FLUE REAR HEAT DEFLECTOR SG4*,SG8 A C SPLASH BACK SG4,SG4R,SG4T 9 A C SPLASH BACK SG8 0 2 B23040-C B C B C DOOR ASSEMBLY SG4,SG4R,SG4T FRONT PANEL TOP DECK WELDMENT SG4,SG4R,SG4T FRONT PANEL ASSEMBLY SG4,SG4R,SG4T B C B C B C DOOR ASSEMBLY SG8 FRONT PANEL TOP DECK WELDMENT SG8 FRONT PANEL ASSEMBLY SG8 3 B38080 HINGE WELDMENT LOWER RIGHT HAND SG* 4 B HINGE WELDMENT UPPER RIGHT HAND SG* 5 A BRACKET MAGNETIC CATCH STUD SPLASH BACK SCREW ON 7 P MAGNETIC CATCH STANDARD 8 PP006 HANDLE DOOR RECESSED PLASTIC 9 SEE DRAWING S CASTER SWIVEL 9" NON-LOCKING 20 SEE DRAWING S CASTER SWIVEL 9" LOCKING N/A SEE DRAWING S LEG SET W/HARDWARE 9" (4-PACK) 2 PP0023 SCREW 0-24 X 3/8 SELF TAPPING 22 P SCREW 0-24 X /2 SELF TAPPING 23 P SCREW /4-20 X 5/8 HEX HEAD CAP ZN SCREW 0-24 X 3/8 TRUSS HEAD SLOTTED LOCKING SST BOLT /4-20 X 3/8 HEX FLANGE HEAD 26 P NUT HEX (KEP) 0-24 ZN 27 NOT SHOWN (INCLUDES ITEMS: -6 & 2) B C B C CABINET ASSEMBLY STAND ALONE SG4,SG4R,SG4T CABINET ASSEMBLY STAND ALONE SG8 34 L20-22 Rev 4 (06/06)

35 Standard Cabinet Drawing E2 L20-22 Rev 4 (06/06) 35

36 F) ENTRANCE BOX Entrance Box Drawing F Parts List ITEM # PART # PART DESCRIPTION B WIRING HARNESS ELECTRONIC IGNITION MODULE RIGHT-HAND SG* B WIRING HARNESS ELECTRONIC IGNITION MODULE LEFT-HAND SG*, SGM* B WIRING HARNESS ELECTRONIC IGNITION MODULE LEFT-HAND CE SG*, SGM* B WIRING HARNESS ELECTRONIC IGNITION MODULE RIGHT-HAND CE SG* 2 B VOLTAGE SELECTOR SWITCH ASSEMBLY 20/208/ V 3 B WIRING HARNESS ENTRANCE BOX TRANSFORMER (AFTER 08/2000) B WIRING HARNESS ENTRANCE BOX TRANSFORMER (PRIOR TO 08/2000) WIRING HARNESS SPINAL TAP LOWER SG* B (USED PRIOR TO 08/2000) 4 B67470 WIRING HARNESS SPINAL TAP LOWER WITH RELAY BOARD SG* B WIRING HARNESS SPINAL TAP LOWER WIRE-REDUCTION-BOARD SGM* 5 A C ENTRANCE BOX IGNITION MODULE BRACKET LEFT-HAND SG*, SGM* A C ENTRANCE BOX IGNITION MODULE BRACKET RIGHT-HAND SG* A ENTRANCE BOX SWITCH COVER 20V 6 A ENTRANCE BOX SWITCH COVER 208V A ENTRANCE BOX SWITCH COVER 220/240V A C A C A C A C A C ENTRANCE BOX POWER SUPPLY LEFT-HAND ENTRANCE BOX WIRE COVER INNER LEFT-HAND SG*, SGM* (NOT USED PRIOR TO /200, REQUIRES NEW ITEM #0 ON PRIOR UNITS) ENTRANCE BOX SUPPORT BRACKET LEFT-HAND SG*, SGM* ENTRANCE BOX WIRE COVER OUTER LEFT-HAND SG*, SGM* ENTRANCE BOX IGNITION MODULE SPLASH SHIELD LEFT-HAND ELECTRONIC IGNITION MODULE 24VAC CE SG*, SGM* A C A C A C A C A C ENTRANCE BOX POWER SUPPLY RIGHT-HAND ENTRANCE BOX WIRE COVER INNER RIGHT-HAND SG* (NOT USED PRIOR TO /200, REQUIRES NEW ITEM #0 ON PRIOR UNITS) ENTRANCE BOX SUPPORT BRACKET RIGHT-HAND SG* ENTRANCE BOX WIRE COVER OUTER RIGHT-HAND SG* ENTRANCE BOX IGNITION MODULE SPLASH SHIELD RIGHT-HAND CONTROLLER IGNITION SPARK 24VAC 90SEC SG*, SGM* POWER CONNECTOR INLET & OUTLET IEC-320 (REPLACES , REQUIRES NEW ITEM #7 PRIOR TO 6/05) BUSHING.52 HOLE DIA 5 PP0023 SCREW 0-24 X 3/8 SELF TAPPING 6 PP0429 TRANSFORMER 80VA 20/208/240V TO 24V 7 PP0686 SCREW 6-32 X /4 ROUND HEAD PHILLIPS ZN 8 PP0689 SCREW 6-32 X /2 ROUND HEAD PHILLIPS ZN 9 P SCREW 6-32 X ROUND HEAD ZN (USED WITH ONLY) PP0690 SCREW 6-32 X /2 TRUSS HEAD PHILLIPS ZN (USED WITH ONLY) 20 PP337 RECEPTACLE 0A-250V IEC-320 SNAP-IN 36 L20-22 Rev 4 (06/06)

37 Entrance Box Drawing F PRE 08/2000 DETAIL L20-22 Rev 4 (06/06) 37

38 G) CONTROL BOX Control Box Pre 8/00 Drawing G Parts List ITEM # PART # PART DESCRIPTION STRAIN RELIEF, LAY IN TERMINAL BLOCK, BARRIER TERMINAL BLOCK, BARRIER END PLATE FUSE CERAMIC 2.5A FAST-ACTING /4 X -/ A C A C A C CONTROL BOX, SG4, SG4T, SG4R CONTROL BOX, HEAT SHIELD SG4, SG4T, SG4R CONTROL BOX, CABLE RETAINER SG4* WITH BACK-UP T-STAT A C A C A C CONTROL BOX, SG8 CONTROL BOX, HEAT SHIELD SG8 CONTROL BOX, CABLE RETAINER SG8 WITH BACK-UP T-STAT 8 A C CONTROL BOX, CABLE RETAINER SG4* WITHOUT BACK-UP T-STAT A C 9 A C CONTROL BOX, CABLE RETAINER SG4, SG4R 0 A C CONTROL BOX, RELAY BRACKET SG* B67460 WIRING HARNESS, SPINAL TAP UPPER 24V SG* 2 P SCREW, 6-32 X 3/8 ROUND HEAD PHILLIPS 3 PP0023 SCREW 0-24 X 3/8 SELF TAPPING 4 PP0686 SCREW, 6-32 X /4 ROUND HEAD PHILLIPS 5 PP0689 SCREW, 6-32 X /2 ROUND HEAD PHILLIPS 6 PP24 RELAY, 24VDC SPDT WITH MOUNTING TABS 7 P NUT, 0-24 HEX (KEP) DIGITAL T-STAT SG4, SG4R, SG8 8 CONTROL BOX, CABLE RETAINER SG8 WITHOUT BACK-UP T-STAT COMPUTER SG4, SG8, SG4R COMPUTER SG4T DIGITAL T-STAT SG4T B C FRONT PANEL BEZEL SG4, SG4T,SG4R (COMPUTER CONTROL) 9 B C FRONT PANEL BEZEL SG8 (COMPUTER CONTROL) B36380-C FRONT PANEL BEZEL SG4, SG4T, SG4R (BLANK) B C FRONT PANEL BEZEL SG8 (BLANK) 20 PP0690 SCREW, 6-32 X /2 TRUSS HEAD PHILLIPS 38 L20-22 Rev 4 (06/06)

39 Control Box Pre 8/00 Drawing G L20-22 Rev 4 (06/06) 39

40 Control Box Post 8/00 Drawing G2 Parts List ITEM # PART # PART DESCRIPTION STRAIN RELIEF, LAY IN 2 B WIRING RELAY BOARD NO BACK-UP OPTION 3 B WIRING HARNESS SCB FUSE CERAMIC 2.5A FAST-ACTING /4 X -/4 A C CONTROL BOX, SG4, SG4T, SG4R 5 A C CONTROL BOX, SG8, SGM824 A C CONTROL BOX, SGM24, SGM34 A C CONTROL BOX, HEAT SHIELD SG4, SG4T, SG4R 6 A C CONTROL BOX, HEAT SHIELD SG8, SGM824 A C CONTROL BOX, HEAT SHIELD SGM24, SGM A C A C CONTROL BOX, CABLE RETAINER SG4* WITH BACK-UP T-STAT CONTROL BOX, CABLE RETAINER SG4* WITHOUT BACK-UP T-STAT A C A C CONTROL BOX, CABLE RETAINER SG8,SGM WITH BACK-UP T-STAT CONTROL BOX, CABLE RETAINER SG8,SGM WITHOUT BACK-UP T-STAT 9 A C CONTROL BOX, CABLE RETAINER SG4, SG4R RELAY BOARD INSULATION RELAY BOARD 24V CLASS RELAY BOARD INSULATION SCB RELAY BOARD 24V CLASS 2 SCB AND SGM 2 PP0023 SCREW 0-24 X 3/8 SELF TAPPING SCREW 4-40 X 3/8 ROUND HEAD SLOTTED ZN 4 B WIRING HARNESS, RELAY BOARD TO CONTROL 5 B WIRING HARNESS, SCB JUMPER SGM 6 P NUT, 0-24 HEX (KEP) DIGITAL T-STAT SG4, SG4R, SG COMPUTER SG4, SG8, SG4R COMPUTER SG4T DIGITAL T-STAT SG4T B C FRONT PANEL BEZEL SG4, SG4T,SG4R (COMPUTER CONTROL) B C FRONT PANEL BEZEL SG8 (COMPUTER CONTROL) B C FRONT PANEL BEZEL SGM824 (COMPUTER CONTROL) B C FRONT PANEL BEZEL SGM24 (COMPUTER CONTROL) 8 B C FRONT PANEL BEZEL SGM34 (COMPUTER CONTROL) B36380-C FRONT PANEL BEZEL SG4, SG4T, SG4R (BLANK) B C FRONT PANEL BEZEL SG8 (BLANK) B C FRONT PANEL BEZEL SGM824 (BLANK) B C FRONT PANEL BEZEL SGM24 (BLANK) B C FRONT PANEL BEZEL SGM34 (BLANK) 9 A C CONTROL BOX, FRONT PANEL BEZEL SUPPORT SGM24 A C CONTROL BOX, FRONT PANEL BEZEL SUPPORT SGM34 20 PP0690 SCREW, 6-32 X /2 TRUSS HEAD PHILLIPS 40 L20-22 Rev 4 (06/06)

41 Control Box Post 8/00 Drawing G2 L20-22 Rev 4 (06/06) 4

42 H) SMALL ASSEMBLIES Small Assemblies Drawing H Parts List ITEM# PART# PART DESCRIPTION PP0084 SWITCH, HI-LIMIT LCM A C PIPING, BRACKET HI-LIMIT-THERMOSTAT SG MILLIVOLT THERMOSTAT, RX MILLIVOLT F THERMOSTAT, RX MILLIVOLT F 4 P CLIP, CANOE FASTEX 5 PP0539 KNOB, THERMOSTAT WITH OFF, F & C 6 PP0687 SCREW, 6-32 X 33 THRUSS HEAD PHILLIPS ZN 7 P SCREW, 8-32 X 250 HEX HEAD ZN 8 A C PIPING, BRACKET HI-LIMIT SG 24VAC 9 A C PIPING, BRACKET HI-LIMIT & THERMOSTAT SGC 0 B WIRING, MILLIVOLT HI-LIMIT & THERMOSTAT SG B WIRING, MILLIVOLT THERMOSTAT SG CE 2 B WIRING, RADIX ASSEMBLY 3 B WIRING, HI-LIMIT 24VAC SG 4 B CONTROL BOX, ASSEMBLY SM SG SSTC CONTROL, SOLID STATE WITH MELT + DVI PRIMARY 24V CONTROL, SOLID STATE WITH MELT + DVI BACKUP 24V STANDOFF, THREADED MALE TO FEMALE 6-32 UNC X P00900 NUT, HEX KEP 6-32 ZN GROMMET,.250ID,.500OD,.375GR KNOB,COLLET WITH CAP + POINTER.250 (REPLACES ) 20 A LABEL, SOLID STATE CONTROLLER SG A60840 LABEL, SOLID STATE BACKUP CONTROLLER 2 B WIRING, RELAY BOARD TO BACKUP CONTROL (NOT USED PRIOR TO 8/00) STRAIN RELIEF, LAY IN 23 B CONTROL BOX, ASSY SSTC PRIMARY SG (REPLACES B C) B CONTROL BOX, ASSY SSTC BACKUP SG (REPLACES B C) 24 B WIRING, CONTROL REMOTE EXTERNAL (HOOD) 25 B WIRING, CONTROL REMOTE INTERNAL 42 L20-22 Rev 4 (06/06)

43 Small Assemblies Drawing H L20-22 Rev 4 (06/06) 43

44 I) DRAIN LINE Drain Line Drawing I Parts List ITEM# PART# PART DESCRIPTION A FILTER DRAIN FLANGE 2 A70220 FILTER DRAIN SEAL FERRULE 3 B66650 FILTER DRAIN ELBOW /8-6 X -/4 SCREW 5A TEFLON O-RING, 3" X 3.25 OD (WHITE) 5B VITON O-RING (BLACK) B FILTER DRAIN LINE DOWN SPOUT SG4-4, SG4-8, SG4-4R B FILTER DRAIN LINE DOWN SPOUT SG8-8, SG8-4* 6 B FILTER DRAIN LINE DOWN SPOUT SG4T-4, SG4T-4R B FILTER DRAIN LINE DOWN SPOUT SG4T-8 B FILTER DRAIN LINE DOWN SPOUT SGM , SGM824-24, SGM B FILTER DRAIN LINE DOWN SPOUT SGM824-34, SGM24-34, SGM STEEL PLUG, /2NPT INTERNAL HEX 8 B FILTER DRAIN TEE DRAINLINE GASKET QUICK RELEASE BAND CLAMP A DRAIN LINE TUBE SG8-8, SGM A DRAIN LINE TUBE SG8-4 A DRAIN LINE TUBE SG4-8 A DRAIN LINE TUBE SG4-4 A DRAIN LINE TUBE SG4T-4, SG4-4T A70224 DRAIN LINE TUBE SG4T-4T A DRAIN LINE TUBE SG4T-8 A DRAIN LINE TUBE SG8-4T A DRAIN LINE TUBE SGM824-24, SGM A DRAIN LINE TUBE SGM24-24 A DRAIN LINE TUBE SGM824-34, SGM A DRAIN LINE TUBE SGM34-24, SGM24-34 A DRAIN LINE TUBE SGM A70270 FILTER, NIPPLE ADAPTER 3 B FILTER DRAIN OUTLET SG4T/4T, SFSG4T 4 B FILTER DRAIN OUTLET LH B FILTER DRAIN OUTLET RH SG4/BNB 5 B FILTER DRAIN OUTLET RH SG4T/BNB B FILTER DRAIN OUTLET RH SG8/BNB 6 B B-N-B DRAIN LINE 7 B FILTER DRAIN ELBOW SG4T, SGSG4T LH/RH 8 B FILTER DRAIN TEE SG4T 9 B66740 FILTER DRAIN FIXED ELBOW SFSG4, SFSG8 20 B FILTER DRAIN TEE SFSG4, SFSG8 2 B FILTER DRAIN LINE DOWN SPOUT SFSG4 B FILTER DRAIN LINE DOWN SPOUT SFSG8, SFSGM* 22 A C FILTER DRAIN OUTLET SUPPORT BRACKET 23 A C FILTER DRAIN OUTLET SUPPORT MOUNTING BRACKET INNER 24 A C FILTER DRAIN OUTLET SUPPORT MOUNTING BRACKET OUTER 25 P SCREW, 0-24 X /2 SELF TAPPING 26 A C FILTER DRAIN LINE SUPPORT SGBNB4 A C FILTER DRAIN LINE SUPPORT SGBNB8 27 P03300 SCREW, /4-20 X 3/8 28 PP0668 ACORN NUT, / P WASHER, FLAT /4 30 P WASHER, 3/8 SPLIT LOCK 3 PP077 VINYL SCREW PROTECTION CAP 44 L20-22 Rev 4 (06/06)

45 Drain Line Drawing I L20-22 Rev 4 (06/06) 45

46 J) FILTER PAN Filter Pan Drawing J Parts List ITEM# PART# PART DESCRIPTION B66720 FILTER, STRAINER CAP SFD B FILTER, PICKUP TUBE SFD 2 B FILTER, PICKUP TUBE SGM* B FILTER, PICKUP TUBE SFSG4 B66700 FITLER, PICKUP TUBE SFSG O-RING, VITON " ID X.375" OD B FILTER, SUPPORT CLIP SFD PAPER B FILTER, SUPPORT CLIP SFD PAPERLESS 4 B6670 FILTER, SUPPORT CLIP SFSG8 PAPER (PRIOR TO 2/0/04) B66702 FILTER, SUPPORT CLIP SFSG4 PAPER B66703 FILTER, SUPPORT CLIP SFSG8, SGM* PAPER (POST 2/0/04) B FILTER, SUPPORT CLIP SFSG*, SGM* PAPERLESS B FILTER, SUPPORT SFD PAPER B FILTER, SUPPORT SFSG8 PAPER (PRIOR TO 2/0/04) 5 B FILTER, SUPPORT SFSG4 PAPER B FILTER, SUPPORT SFSG8, SGM* PAPER (POST 2/0/04) B FILTER, SUPPORT SFD, SFSG8, SGM* PAPERLESS B FILTER, SUPPORT SFSG4 PAPERLESS B FILTER, PAN SFSG4 B FILTER, PAN SFSG8 B FILTER, PAN SFD 6 B FILTER, PAN SFD FOR 36" CABINET (" LEGS/CASTERS) B FILTER, PAN SGM824 B FILTER, PAN SGM24 B FILTER, PAN SGM RIGID 2.5" CASTER 8 PP208 LOCK WASHER #0 SST (SPLIT) 9 P00300 SCREW, 0-24 X 3/ EXTERNAL RETAINING RING -7/6" B FILTER, PAPERLESS WIRE MESH ENVELOPE B FILTER, PAPERLESS WIRE MESH ENVELOPE SFSG4* 2 B40040 FILTER, PAN HANDLE (HARDEES) 3 PP2000 SCREW, 0-24 X /2 4 B66780 FILTER, PICKUP TUBE SFD (PRIOR TO 3/26/04) 5 B FILTER, PAN SFD (PRIOR TO 3/26/04) 46 L20-22 Rev 4 (06/06)

47 Filter Pan Drawing J L20-22 Rev 4 (06/06) 47

48 K) WASTE OIL MANAGEMENT Waste Oil Management Drawing K Parts List ITEM# PART# PART DESCRIPTION B HANDLE WELDMENT WASTE OIL 2 A C VALVE BRACKET REAR HANDLE WELDMENT WASTE OIL 3 P WASHER FLAT 5/6 ZINC WASHER SPRING 5/8 WITH 5/6 HOLE 5 P COTTER PIN /6 X 3/4 ZINC 6 A C FILTER PAN COVER WASTE OIL 7 A C VALVE BRACKET FRONT HANDLE WELDMENT WASTE OIL 8 B ELECTRICAL ASSEMBLY DVI 9 PP0266 SCREW 4-40 X /4 ROUND HEAD ZINC 0 A C BRACKET WASTE OIL ASSEMBLY TO CABINET P REDUCER HEX 3/4 X /2 NPT BLACK TEE STEEL /2NPT M X M X F 3 P ELBOW /2NPT 90 DEGREE 4 B WIRING JUMPER 24V CHECK VALVE /2NPT 5GAL/MIN 25PSI MIN 6 P NIPPLE BLACK /2NPT X 2 /2" 7 P NIPPLE BLACK /2NPT X 3 /2" TEFLON HOSE SWIVEL ENDS 9.5" 9 A80330 TEE 2X 5/6 MALE FLARE X /2FNPT END CAP FITTING 5/6 FLARE 2 A ELBOW 5/6 FLARE MALE X FEMALE 22 PP0574 BALL VALVE /2NPT STAINLESS STEEL 23 P NIPPLE BLACK /2NPT X 5 /2" 24 A C BRACKET WASTE OIL ASSEMBLY SUPPORT TO CABINET 25 PP0023 SCREW 0-24 X 3/8 SELF TAPPING SCREW 0-24 X 3/8 ROUND HEAD STAINLESS PHILLIPS 27 PP0263 POXIMITY SWITCH ACTUATOR 28 A60900 LABEL WASTE OIL FRONT 29 A6090 LABEL WASTE OIL REAR 30 P SPLIT LOCK WASHER #0 ZINC CAP BLACK 3/4NPT 32 A C BRACKET PIPING EXTENSION TO CABINET WASTE OIL 33 A C BRACKET MANIFOLD REAR WASTE OIL 34 A C BRACKET MANIFOLD FRONT WASTE OIL 35 P COUPLING 3/4NPT CRS NIPPLE BLACK 3/4NPT X " 37 P UNION BLACK 3/4NPT NIPPLE BLACK 3/4NPT X 7" 39 P NIPPLE BLACK 3/4NPT X 3 /2" 40 P ELBOW BLACK 3/4NPT 4 P NIPPLE BLACK 3/4NPT X 4" 42 P SCREW 0-6 X 5/8 HEX SELF DRILLING 48 L20-22 Rev 4 (06/06)

49 Waste Oil Management Drawing K L20-22 Rev 4 (06/06) 49

50 L) PUMP ASSEMBLY Pump Assembly Pre 3/04 Drawing L Parts List ITEM# PART# PART DESCRIPTION " FLEX TUBE WITH 5/6 FLARE FITTINGS (PRIOR TO 4/0) SEAL KIT HAIGHT 8GPM TEFLON HOSE W/5/6 FLARE FITTINGS (AFTER 4/0, NOT USED W/ ITEM 6) SEAL KIT VIKING 8GPM 3 P STREET ELBOW BLACK IRON 90 3/4NPT NIPPLE 3/4NPT X 0.5 BLACK IRON PUMP ASSEMBLY VIKING 8GPM.3HP 5/230V (50/60HZ) 5A PUMP ASSEMBLY VIKING 8GPM.3HP 208/240V (50/60HZ) NOT PUMP MOTOR ONLY VIKING 8GPM.3HP 5/230V (50/60HZ) SHOWN PUMP MOTOR ONLY VIKING 8GPM.3HP 208/240V (50/60HZ) PUMP HEAD ONLY VIKING 8GPM (NO MOTOR) B C PUMP ASSEMBLY SERVICE 5/230V (VIKING PUMP) B C PUMP ASSEMBLY SERVICE 208/240V (VIKING PUMP) PUMP MOTOR ONLY HAIGHT 8GPM.3HP 5/220V (50/60HZ) PUMP MOTOR ONLY HAIGHT 8GPM.3HP 240V (50HZ) PUMP HEAD ONLY HAIGHT 8GPM (NO MOTOR) PUMP MOTOR ONLY HAIGHT 8GPM.3HP 208V (50/60HZ) MALE FLARE FITTING 5/6 X 3/4NPT (NOT USED AFTER 4/0) 7 P ELBOW BLACK IRON 90 3/4NPT 8 A FILTER RESET LABEL 9 A FILTER RESET PLATE 0 PP0687 SCREW 6-32 X 5/6 A C FILTER RESET BRACKET 2 B FILTER RESET HANDLE 3 PP0784 ROLL PIN 3/32 DIAMETER X P SPRING.39 ID X.48 OD X 2.00 STAINLESS 5 B PUMP BOX WIRING HARNESS 20V B PUMP BOX WIRING HARNESS 220/240V HEATER TAPE 50W 20V /2 X HEATER TAPE 50W 240/220V /2 X HEATER TAPE 50W 208V /2 X 72 7 P KEP NUT / A C FILTER PUMP MOUNTING PLATE (SFD) 9 PP206 SCREW /4-20 X P WASHER FLAT 5/6 2 A C PUMP CONTROL BOX COVER 22 PP069 SCREW 0-24 X TRANSFORMER 5VA (5V) RELAY DPST 30A 24VAC ( V) PP058 TRANSFORMER 5VA ( V) RELAY SPST 30A 24VAC (5V) 25 A70240-C PUMP CONTROL BOX BODY 26 PP092 STRAIN RELIEF RIGHT ANGLE STRAIN RELIEF RIGHT ANGLE 3/4 DIAMETER CIRCUIT BREAKER ROCKER SPST 0A 250V (5V) CIRCUIT BREAKER ROCKER DPST 5A 250V ( V) 29 PP0023 SCREW SELF TAPPING 0-24 X NIPPLE 3/4NPT X 9 BLACK IRON 3 A FILTER PICK UP BLOCK VITON O-RING.00 ID X.38 OD 33 A C FILTER PUMP RESET BRACKET 34 A C FILTER DEFLECTOR OIL PICK UP BLOCK (SFD) 35 PP0693 SCREW 0-24 X P WIRENUT YELLOW FUSE CERAMIC.20A TIME DELAY.25 X P QUICK DISCONNECT.25 BLUE INSULATED 39 B C FILTER PUMP ASSEMBLY 5V W/O HEAT TAPE (SG) NOT B C FILTER PUMP ASSEMBLY 230V W/O HEAT TAPE (SG) SHOWN B C FILTER PUMP ASSEMBLY 240V W/O HEAT TAPE (SG) (INCLUDES B C FILTER PUMP ASSEMBLY 5V WITH HEAT TAPE (SG) ALL ITEMS EXCEPT 34 B C FILTER PUMP ASSEMBLY 230V WITH HEAT TAPE (SG) & 35) B C FILTER PUMP ASSEMBLY 240V WITH HEAT TAPE (SG) 50 L20-22 Rev 4 (06/06)

51 Pump Assembly Pre 3/04 Drawing L L20-22 Rev 4 (06/06) 5

52 Pump Assembly Post 3/04 Drawing L2 Parts List ITEM# PART# PART DESCRIPTION TEFLON HOSE 3/4 NPT FEMALE SWIVEL X 3/4 MPT 2 B FILTER INLET COUPLING NIPPLE 3/4NPT X BLACK IRON 4 A C FILTER PUMP MOUNTING PLATE SFS* PUMP ASSEMBLY 8GPM.3HP 5/230V (50/60HZ) PUMP ASSEMBLY 8GPM.3HP 208/240V (50/60HZ) 5A PUMP MOTOR ONLY 8GPM.3HP 5/230V (50/60HZ) PUMP MOTOR ONLY 8GPM.3HP 208/240V (50/60HZ) PUMP HEAD ONLY 8GPM (NO MOTOR) B C PUMP ASSEMBLY SERVICE 5/230V (VIKING PUMP) B C PUMP ASSEMBLY SERVICE 208/240V (VIKING PUMP) 5B PUMP MOTOR ONLY 8GPM.3HP 5/220V (50/60HZ) PUMP MOTOR ONLY 8GPM.3HP 240V (50HZ) PUMP HEAD ONLY 8GPM (NO MOTOR) PUMP MOTOR ONLY 8GPM.3HP 208V (50/60HZ) 6 P WASHER 5/6 FLAT 7 PP0828 NUT HEX 5/6-8 (KEP) 8 PP26 BOLT 5/6 X 3/4 9 PP338 POWER CORD MALE IEC AWG 0 P ELBOW BLACK IRON 90 3/4NPT P NIPPLE 3/4NPT X 2 BLACK IRON 2 P STREET ELBOW BLACK IRON 90 3/4NPT HEATER TAPE 33W 20V /2 X HEATER TAPE 33W 240/220V /2 X HEATER TAPE 33W 208V /2 X HEATER TAPE 50W 20V /2 X 72 (AFTER 3/06) HEATER TAPE 50W 240/220V /2 X 72 (AFTER 3/06) HEATER TAPE 50W 208V /2 X 72 (AFTER 3/06) 4 A C FILTER PIPING CLAMP 5 PP0023 SCREW 0-24 X 3/8 SELF TAPPING SEAL KIT HAIGHT 8GPM SEAL KIT VIKING 8GPM 7 A ELBOW FEMALE X MALE 5/6 FLARE 8 NOT SHOWN (INCLUDES ALL ITEMS) B C B C B C B C B C B C B C B C FILTER PUMP ASSEMBLY 5V W/O HEAT TAPE (SG) FILTER PUMP ASSEMBLY 208V W/O HEAT TAPE (SG) FILTER PUMP ASSEMBLY 230V W/O HEAT TAPE (SG) FILTER PUMP ASSEMBLY 240V W/O HEAT TAPE (SG) FILTER PUMP ASSEMBLY 5V WITH HEAT TAPE (SG) FILTER PUMP ASSEMBLY 208V WITH HEAT TAPE (SG) FILTER PUMP ASSEMBLY 230V WITH HEAT TAPE (SG) FILTER PUMP ASSEMBLY 240V WITH HEAT TAPE (SG) 52 L20-22 Rev 4 (06/06)

53 Pump Assembly Post 3/04 Drawing L2 L20-22 Rev 4 (06/06) 53

54 Pump Assembly SFSG Drawing L3 Parts List ITEM# PART# PART DESCRIPTION TEFLON HOSE 3/4 NPT FEMALE SWIVEL X 3/4 MPT 2 P COUPLING 3/4NPT (PRIOR TO JANUARY 2004) B FILTER INLET COUPLING NIPPLE 3/4NPT X 2 BLACK IRON 4 A C FILTER PUMP PLATE (PRIOR TO JANUARY 2004) A C FILTER PUMP MOUNTING PLATE PUMP ASSEMBLY 8GPM.3HP 5/230V (50/60HZ) PUMP ASSEMBLY 8GPM.3HP 208/240V (50/60HZ) 5A PUMP MOTOR ONLY 8GPM.3HP 5/230V (50/60HZ) PUMP MOTOR ONLY 8GPM.3HP 208/240V (50/60HZ) PUMP HEAD ONLY 8GPM (NO MOTOR) B C PUMP ASSEMBLY SERVICE 5/230V (VIKING PUMP) B C PUMP ASSEMBLY SERVICE 208/240V (VIKING PUMP) 5B PUMP MOTOR ONLY 8GPM.3HP 5/220V (50/60HZ) PUMP MOTOR ONLY 8GPM.3HP 240V (50HZ) PUMP HEAD ONLY 8GPM (NO MOTOR) PUMP MOTOR ONLY 8GPM.3HP 208V (50/60HZ) 6 P WASHER 5/6 FLAT 7 PP0828 NUT HEX 5/6-8 (KEP) 8 PP26 BOLT 5/6 X 3/4 9 PP338 POWER CORD MALE IEC AWG 0 P ELBOW BLACK IRON 90 3/4NPT P NIPPLE 3/4NPT X 2 BLACK IRON 2 P STREET ELBOW BLACK IRON 90 3/4NPT HEATER TAPE 33W 20V /2 X HEATER TAPE 33W 240V /2 X HEATER TAPE 33W 208V /2 X HEATER TAPE 50W 20V /2 X 72 (AFTER 3/06) HEATER TAPE 50W 240/220V /2 X 72 (AFTER 3/06) HEATER TAPE 50W 208V /2 X 72 (AFTER 3/06) 4 A C FILTER PIPING CLAMP (NOT USED PRIOR TO JANUARY 2004) 5 PP0023 SCREW 0-24 X 3/8 SELF TAPPING 6 A ELBOW FEMALE X MALE 5/6 FLARE SEAL KIT HAIGHT 8GPM 7 8 NOT SHOWN (INCLUDES ALL ITEMS) SEAL KIT VIKING 8GPM B66830-C FILTER PUMP ASSEMBLY 5V W/O HEAT TAPE (SG) B C FILTER PUMP ASSEMBLY 208V W/O HEAT TAPE (SG) B C FILTER PUMP ASSEMBLY 230V W/O HEAT TAPE (SG) B C FILTER PUMP ASSEMBLY 240V W/O HEAT TAPE (SG) B C FILTER PUMP ASSEMBLY 5V WITH HEAT TAPE (SG) B C FILTER PUMP ASSEMBLY 208V WITH HEAT TAPE (SG) B C FILTER PUMP ASSEMBLY 230V WITH HEAT TAPE (SG) B C FILTER PUMP ASSEMBLY 240V WITH HEAT TAPE (SG) 54 L20-22 Rev 4 (06/06)

55 Pump Assembly SFSG Drawing L3 L20-22 Rev 4 (06/06) 55

56 M) PUMP BOX Pump Box Drawing M Parts List ITEM# PART# PART DESCRIPTION 2 A C B FILTER PUMP BOX HOUSING FILTER PUMP BOX WIRING A C B67560 FILTER PUMP BOX HOUSING SGM* FILTER PUMP BOX WIRING SGM* POWER INLET/OUTLET IEC320 (REPLACES , NEW A C REQUIRED PRIOR TO 6/05) 4 P NUT 0-24 (KEP) 5 PP058 RELAY SPST 30A 24VAC (5V) RELAY DPST 30A 24VAC (208/220/240V) 6 PP0693 SCREW 0-24 X 3/ TRANSFORMER 5VA 20V TRANSFORMER 5A 240VAC TRANSFORMER 5VA 208V CIRCUIT BREAKER, SPST 250V 0A (5V) CIRCUIT BREAKER, DPST 250V 5A (208/220/240V) FUSE, CERAMIC 0.2A TD.25 X.25 (208/220/240V) PP228 M-F JUMPER CORD IEC AWG X 34" SFSG* BUTT SPLICE BLUE (5V) PP0765 CORD NEMA 5-5P / IEC AWG X 96" FUSE HOLDER (208/220/240V) 2 A C CABLE STRAIN RELIEF AND RETAINER SGM* 3 A84400-C CABLE RETAINER LAY IN STRAIN RELIEF 5 P INSULATED QUICK DISCONNECT TERMINAL.250 BLUE B C FILTER PUMP CONTROL BOX ASSEMBLY 5V SGM* 6 NOT SHOWN (INCLUDES ALL ITEMS) B C FILTER PUMP CONTROL BOX ASSEMBLY 220/240V SGM* B C FILTER PUMP CONTROL BOX ASSEMBLY 5V B C FILTER PUMP CONTROL BOX ASSEMBLY 208V B C FILTER PUMP CONTROL BOX ASSEMBLY 220/240V B C FILTER PUMP CONTROL BOX ASSEMBLY 5V SFSG* B C FILTER PUMP CONTROL BOX ASSEMBLY 208V SFSG* B C FILTER PUMP CONTROL BOX ASSEMBLY 220/240V SFSG* 56 L20-22 Rev 4 (06/06)

57 Pump Box Drawing M L20-22 Rev 4 (06/06) 57

58 N) RETURN LINE Return Line Drawing N Parts List ITEM# PART# PART DESCRIPTION PP0263 PROXIMITY ACTUATOR SWITCH 2 A C FILTER RETURN HANDLE BRACKET CLAMP A C FILTER RETURN HANDLE BRACKET SG4, SG8 3 A C FILTER RETURN HANDLE BRACKET SG4R A C FILTER RETURN HANDLE BRACKET SGM34 A C FILTER RETURN HANDLE BRACKET SGM824, SGM24 4 PP0266 SCREW 4-40 X.250 B RETURN HANDLE SG4, SG4R 5 B RETURN HANDLE SG8 B RETURN HANDLE SG4T B RETURN HANDLE SGM824, SGM24, SGM34 6 PP0023 SCREW 0-24 X /2 SELF TAPPING 7 B DRAIN VALVE INTERLOCK ASSEMBLY RETURN VALVE HANDLE SG4T LH 9 P COTTER PIN /6 X 3/ FILTER RETURN BALL VALVE 3 WAY (W/ SG4, SG8, SG4T RH HANDLE) RETURN VALVE END CAP 2 A C FILTER RETURN BRACKET SGBNB 3 A C FILTER RETURN BRACKET FRONT SGBNB HOSE REINFORCED TEFLON SWIVEL X SWIVEL 4.5 (4-4) HOSE REINFORCED TEFLON SWIVEL X SWIVEL 9.5 (8-8) HOSE REINFORCED TEFLON SWIVEL X SWIVEL 7.5 (8-4) HOSE REINFORCED TEFLON SWIVEL X SWIVEL 5.0 (4-8) FLEXIBLE TUBING WITH FITTINGS 5.00 (INSIDE 4T-4T) FLEXIBLE TUBING WITH FITTINGS 8.50 (4T-4T) FLEXIBLE TUBING WITH FITTINGS 2.50 (4-4T, 4T-4, 4T-8) FLEXIBLE TUBING WITH FITTINGS 5.50 (4-4, 8-4T, 4-8) FLEXIBLE TUBING WITH FITTINGS 9.00 (8-8, 8-4, 4-8, ) FLEXIBLE TUBING WITH FITTINGS (24-824, ) FLEXIBLE TUBING WITH FITTINGS (34-824, 24-24, ) FLEXIBLE TUBING WITH FITTINGS (34-34, 34-24, 24-34) 5 A RETURN TEE FLARE X FLARE X FLARE SGBNB 6 P WASHER FLAT 5/6 7 PP0693 SCREW 0-24 X 3/8 TH PHILLIPS VENT TUBE PLUG FLEXIBLE TUBING WITH FITTINGS LH UNIT VENT TUBE SPRING WASHER 5/8 5/6 HOLE SWIVEL FITTING NPT TO MPT ADAPTER 22 A C RETURN ACTUATOR SWITCH PLATE SG4T 23 A70230-C RETURN BRACKET REAR SG4T 24 A C RETURN BRACKET FRONT SG4T 25 P GROMMET.25 ID X.88 OD 26 B RETURN HOSE WIRE JUMPER 27 A84440-C WIRE CLAMP 58 L20-22 Rev 4 (06/06)

59 Return Line Drawing N L20-22 Rev 4 (06/06) 59

60 O) FLUSH HOSE ASSEMBLY Flush Hose Assembly Drawing O Parts List ITEM# PART# PART DESCRIPTION B DVI ASSEMBLY 2 PP0266 SCREW 4-40 X /4 3 A C FLUSH HOSE OUTER BRACKET A C FLUSH HOUSE OUTER BRACKET SFSG4, SFSG4T, SGM24 4 PP074 CONNECTOR PUSH VALVE 5 P NIPPLE BLACK IRON, 3/8 NPT X 4-/2 P NIPPLE BLACK IRON, 3/8 NPT X 3-/2 SG4*, SG8, SGM824 6 P NIPPLE BLACK IRON, 3/8 NPT X 0-/2 SFSG4* P NIPPLE BLACK IRON, 3/8 NPT X 9-/2 SGM24, SGM34 P NIPPLE BLACK IRON, 3/8 NPT X 2-/2 W/ WASTE OIL REDUCING COUPLING 3/4 NPT X 3/8 NPT TEFLON HOSE 3/4 MPT FEMALE SWIVEL X 3/4 NPT TEFLON HOSE 9-/2" 3/4 MPT FEMALE SWIVEL X 3/4 MPT FEMALE SWIVEL (SGM*) 9 A C FLUSH HOSE INNER BRACKET 0 P VALVE, BALL 3/8NPT A C FLUSH HOSE VALVE SUPPORT BRACKET 2 P SCREW 0-24 X /2 SELF TAPPING WASHER 5/8 SPRING 5/6 HOLE 4 NUT (PART OF ITEM 0) 5 PP0263 PROXIMITY SWITCH 6 P COTTER PIN /6 X 3/4 7 B FLUSH HOSE HANDLE B A50620-C FLUSH HOSE VALVE HANDLE HEATER TAPE /2 X 33 (5V) HEATER TAPE /2 X 33 (208V) FLUSH HOSE HANDLE SFSG4, SFSG4T, SGM HEATER TAPE /2 X 33 (220/240V) HEATER TAPE /2 X 48 (5V) SGM24, SGM HEATER TAPE /2 X 48 (208V) SGM24, SGM HEATER TAPE /2 X 48 (220/240V) SGM24, SGM34 20 B HEAT TAPE WIRING "Y" SPLITTER 2 B67480 HEAT TAPE WIRING EXTENSION 22" B HEAT TAPE WIRING EXTENSION 40" B HEAT TAPE WIRING EXTENSION 59" 22 P COUPLING 3/4 NPT (ONLY USED ON SGM34 & SGM24) 23 P NIPPLE BLACK IRON, 3/8 NPT X 9-/2 (ONLY USED ON SGM34 & SGM24) ADAPTER MALE FLARE 45 X MPT (ONLY USED ON SGM*) 25 A ELBOW FEMALE X MALE 5/6 FLARE (ONLY USED ON UNITS W/O WASTE OIL) 26 NOT SHOWN (INCLUDES ALL ITEMS EXCEPT 20 OR 2) B50060-C B C B C B C B C B50060-C B50064-C B50065-C B50066-C B50067-C B50068-C B50069-C B C B50062-C B C B C B C B C B C B C B C FLUSH HOSE ASSEMBLY W/O HEAT TAPE FLUSH HOSE ASSEMBLY W/ HEAT TAPE (5V) FLUSH HOSE ASSEMBLY W/ HEAT TAPE (220/240V) FLUSH HOSE ASSEMBLY W/O HEAT TAPE W/ WASTE OIL FLUSH HOSE ASSEMBLY W/ HEAT TAPE (5V) W/ WASTE OIL FLUSH HOSE ASSEMBLY W/ HEAT TAPE (220/240V) W/ WASTE OIL FLUSH HOSE ASSEMBLY W/O HEAT TAPE SGM824 FLUSH HOSE ASSEMBLY W/ HEAT TAPE (5V) SGM824 FLUSH HOSE ASSEMBLY W/ HEAT TAPE (220/240V) SGM824 FLUSH HOSE ASSEMBLY W/ HEAT TAPE (208V) SGM824 FLUSH HOSE ASSEMBLY W/O HEAT TAPE SGM34 FLUSH HOSE ASSEMBLY W/ HEAT TAPE (5V) SGM34 FLUSH HOSE ASSEMBLY W/ HEAT TAPE (220/240V) SGM34 FLUSH HOSE ASSEMBLY W/ HEAT TAPE (208V) SGM34 FLUSH HOSE ASSEMBLY W/O HEAT TAPE SFSG4* FLUSH HOSE ASSEMBLY W/ HEAT TAPE SFSG4* (5V) FLUSH HOSE ASSEMBLY W/ HEAT TAPE SFSG4* (220/240V) FLUSH HOSE ASSEMBLY W/O HEAT TAPE SGM24 FLUSH HOSE ASSEMBLY W/ HEAT TAPE (5V) SGM24 FLUSH HOSE ASSEMBLY W/ HEAT TAPE (220/240V) SGM24 FLUSH HOSE ASSEMBLY W/ HEAT TAPE (208V) SGM24 60 L20-22 Rev 4 (06/06)

61 Flush Hose Assembly Drawing O L20-22 Rev 4 (06/06) 6

62 P) FLUSH HOSE (HOSE) ASSEMBLY Flush Hose (Hose) Assembly Drawing P Parts List ITEM# PART# PART DESCRIPTION B FILTER RETURN NOZZLE 2 A FILTER RETURN HOSE 3 PP0689 SCREW 6-32 X /2 4 A70640 COUPLING INSULATOR BODY 5 B C FILTER DISCONNET INSULATED COUPLING ASSEMBLY 6 NOT SHOWN (INCLUDES ALL ITEMS) B C FILTER FLUSH HOSE ASSEMBLY 62 L20-22 Rev 4 (06/06)

63 Flush Hose (Hose) Assembly Drawing P L20-22 Rev 4 (06/06) 63

64 Q) BASKET LIFT Basket Lift Drawing Q Parts List ITEM # PART # PART DESCRIPTION A BASKET LIFT MOUNT LEFT-HAND SIDE SG4,SG4R,SG4T A BASKET LIFT MOUNT LEFT-HAND SIDE SG8 2 A BASKET LIFT MOUNT BOTTOM SG 3 A BASKET LIFT MOUNT RIGHT-HAND SIDE SG4,SG4R,SG4T A BASKET LIFT MOUNT RIGHT-HAND SIDE SG8 4 PP0023 SCREW 0-24 X 3/8 SELF TAPPING 5 6 B B BASKET LIFT HANGER WELDMENT HINGED LEFT-HAND SG4,SG4R,SG4T (REPLACES B560420) BASKET LIFT HANGER WELDMENT HINGED RIGHT-HAND SG4,SG4R,SG4T (REPLACES B ) B B BASKET LIFT HANGER WELDMENT HINGED LEFT-HAND SG8 (REPLACES B560430) BASKET LIFT HANGER WELDMENT HINGED RIGHT-HAND SG8 (REPLACES B ) 7 A BASKET LIFT DRIP SHIELD SG 8 PP0668 NUT ACORN W/CENTERLOCK / A BASKET LIFT HANGER SUPPORT AXLE SG 0 A56780 BASKET LIFT HANGER SUPPORT WHEEL SG 2 A B BASKET LIFT HANGER SUPPORT SG4,SG4R,SG4T BASKET LIFT HANGER SUPPORT ASSY SG4,SG4R,SG4T (INCLUDES 8-) A56802 B BASKET LIFT HANGER SUPPORT SG8 BASKET LIFT HANGER SUPPORT ASSY SG8 (INCLUDES 8-) 3 B C BASKET LIFT HANGER AND MOUNTING KIT SG4,SG4R,SG4T (INCLUDES -) NOT SHOWN (INCLUDES ALL ITEMS) B C BASKET LIFT HANGER AND MOUNTING KIT SG8 (INCLUDES -) 64 L20-22 Rev 4 (06/06)

65 Basket Lift Drawing Q L20-22 Rev 4 (06/06) 65

66 R) BASKET LIFT COMPONENTS Basket Lift Components Drawing R Parts List ITEM # PART # PART DESCRIPTION B BASKET LIFT BOX ACTUATOR MODULAR WELDMENT 2 A BASKET LIFT BOX COVER ACTUATOR MODULAR CONTROL BASKET LIFT DRIVER BOARD ACTUATOR VDC IPS LEFT-HAND ACTUATOR VDC IPS RIGHT-HAND 6 PP0429-M TRANSFORMER 80VA 20/208/240V TO 24V A ENTRANCE BOX SWITCH COVER 20V 7 A ENTRANCE BOX SWITCH COVER 208V A ENTRANCE BOX SWITCH COVER 220/240V 8 B WIRING BASKET LIFT LIMIT SWITCH ACTUATOR 9 B WIRING VOLTAGE SELECT 20/208/ V 0 B WIRING HARNESS BASKET LIFT (SG4T) B WIRING BASKET LIFT MAIN ACTUATOR 2 B67790 WIRING BASKET LIFT TRANSFORMER ACTUATOR CLAMP BASKET LIFT LIMIT SWITCH 4 P60707 CLAMP WIRE 3/8 NYLON 5 PP0673 WASHER LOCK /4 SST SPLIT 6 N/A WASHER FLAT /4 SST 7 N/A HOLE PLUG KEYSTONE #760 OR EQUIVALENT 8 N/A SCREW 6-32 X 3/4 PHH PNH SST W/LK WASHER 9 P SCREW 0-24 X /2 SELF TAPPING 20 PP0693 SCREW 0-24 X 3/8 PHH TRH ZN 2 N/A SCREW 0-24 X 3/8 INDT HEX W/EXT WASHER 22 N/A SOCKET HEAD CAP SCREW /4-20 X -/2 SST 23 NOT SHOWN (INCLUDES ALL ITEMS) B C BASKET LIFT ACTUATOR BOX ALL VOLTAGES (NOT SHOWN) 66 L20-22 Rev 4 (06/06)

67 Basket Lift Components Drawing R L20-22 Rev 4 (06/06) 67

68 S) ACCESSORIES Accessories Drawing S Parts List S(A) ITEM # PART # PART DESCRIPTION A33000 CLEAN-OUT ROD 2 PP0056 CLEANING BRUSH NYLON 3 A2500 DRAIN EXTENSION 4 B50080 FRYER CRUMB SCOOP 5 B66820 FILTER CRUMB SCOOP A FILTER PAPER 4 X 22 SGM 6 PP063 FILTER PAPER 8.5 X 20.5 SFD, SFSG8 A FILTER PAPER 20.5 X 9.92 SFS4, SFSG4R, SFSG4T 7 CONTACT PITCO FRONT WORKSHELF 8 CONTACT PITCO SIDE WORKSEHELVE/DRAINBOARD 9 CONTACT PITCO REAR WORKSHELF 0 CONTACT PITCO REAR WORKSHELF INSERT CONTACT PITCO SPLASH GUARD SIDE " LEG B " LEG SET OF 4 WITH HARDWARE B " LEG ADJUSTABLE SFSG* 2 B " LEG ADJUSTABLE SGM* " LEG WITH BOTTOM BOLT FLANGE ADJUSTABLE " LEG WITH BOTTOM BOLT FLANGE ADJUSTABLE " LEG WITH BOTTOM BOLT FLANGE ADJUSTABLE " LEG ADJUSTABLE WITH FLANGED FOOT (SGC ONLY) PP084 9" CASTER NON-LOCKING B " CASTER SET OF 4 (2 LOCKING, 2 NON-LOCKING) " CASTER NON-LOCKING SGM* B " RIGID CASTER NON-LOCKING B " RIGID CASTER NON-LOCKING SFSG4*, SFSG8 B " RIGID CASTER NON-LOCKING SFSGM824 PP085 9" CASTER LOCKING " CASTER LOCKING SGM* 4 B " RIGID CASTER LOCKING B " RIGID CASTER LOCKING SFSG4*, SFSG8 B " RIGID CASTER LOCKING SFSGM824 P TWIN BASKET SG8 P TWIN BASKET FINE MESH SG8 P TWIN BASKET SG4, SG4R, SG4T P TWIN BASKET FINE MESH SG4, SG4R, SG4T P TRIPLE BASKET SG4, SG4R NOT FOR USE WITH BASKET LIFTS 5 P TRIPLE BASKET SG8 NOT FOR USE WITH BASKET LIFTS P SQUARE BULK BASKET FRONT HANDLE SG4, SG4R P SQUARE BULK BASKET FINE MESH FRONT HANDLE SG4, SG4R P60728 SQUARE BULK BASKET FRONT HANDLE SG8 P SQUARE BULK BASKET SIDE HANDLES SG8 A45470 SMALL BASKET SGM* A LARGE BASKET SGM* 6 SEE PARTS LIST S(B) TUBE RACK 7 SEE PARTS LIST S(B) CABINET BACK 8 SEE PARTS LIST S(B) TANK COVER ASSEMBLY 9 B C OUTLET BOX ASSEMBLY 25V 5A 20 SEE PARTS LIST S(B) FILTER CRUMB CATCH BASKET 2 A C TANK BACK STANDOFF SG4 22 SEE PARTS LIST S(B) FLUE EXTENSION WELDMENT 23 SEE PARTS LIST S(B) GAS HOSE QUICK DISCONNECT WITH VALVE 68 L20-22 Rev 4 (06/06)

69 Accessories Drawing S L20-22 Rev 4 (06/06) 69

70 Accessories Drawing S Parts List S(B) ITEM # PART # PART DESCRIPTION P TUBE RACK SG4, SG4R B4580 TUBE RACK SG4T A TUBE SCREEN SG4, SG4R, SFSG4 B4590 TUBE RACK SG8 6 P TUBE SCREEN SG8 P TUBE SCREEN SGM34 A45460 TUBE SCREEN SGM824 P TUBE SCREEN SGM24 B C FISH GRID SG4 B C FISH GRID SG8 A C CABINET BACK SKIN STANDARD SG4, SG4R, SG4T A C CABINET BACK SKIN STANDARD SG8 A C CABINET BACK SKIN MODULAR SG4, SG4R, SG4T 7 A C CABINET BACK SKIN MODULAR SG8 A84236-C CABINET BACK SKIN FLAT-TOP SGBNB4 A84238-C CABINET BACK SKIN FLAT-TOP SG8 A C CABINET BACK SKIN SHORT FLUE SGC (BEFORE 5/03) A C CABINET BACK SKIN TALL FLUE SGC B2050-C TANK COVER ASSEMBLY SG4, SG4R, SG4T B20502-C TANK COVER ASSEMBLY SG8 B20504-C TANK COVER ASSEMBLY SGC 8 B2052-C TANK COVER ASSEMBLY SGM24 B2053-C TANK COVER ASSEMBLY SGM34 B20603-C TANK COVER ASSEMBLY BASKET-LIFT SG4, SG4R, SG4T B20604-C TANK COVER ASSEMBLY BASKET-LIFT SG8 20 B FILTER CRUMB CATCH BASKET SFD B66740 FILTER CRUMB CATCH BASKET SFSG8 B C FLUE EXTENSION WELDMENT SG8-3 B C FLUE EXTENSION WELDMENT SG B C FLUE EXTENSION WELDMENT SG8 B C FLUE EXTENSION WELDMENT SG4-3 B C FLUE EXTENSION WELDMENT SG4-2 B C FLUE EXTENSION WELDMENT SG4 B GAS HOSE QUICK DISCONNECT WITH VALVE 3/4 NPT X 36" B GAS HOSE QUICK DISCONNECT WITH VALVE 3/4 NPT X 48" 23 B GAS HOSE QUICK DISCONNECT WITH VALVE NPT X 36" B GAS HOSE QUICK DISCONNECT WITH VALVE NPT X 48" B GAS HOSE QUICK DISCONNECT WITH VALVE -/4 NPT X 36" B GAS HOSE QUICK DISCONNECT WITH VALVE -/4 NPT X 48" 70 L20-22 Rev 4 (06/06)

71 This Page Left Intentionally Blank Exploded Parts-SG Gas Models L20-22 Rev 4 (06/06) 7

72 T) BNB 72 BNB Drawing T Parts List ITEM # PART # PART DESCRIPTION A C SCOOPED PAN LINER SGBNB4 A C SCOOPED PAN LINER SGBNB4 DIVIDED A C SCOOPED PAN LINER SGBNB8 A C SCOOPED PAN LINER SGBNB8 DIVIDED 2 A58240-C BNB BOTTOM SHELF SGBNB4 A C BNB BOTTOM SHELF SGBNB8 PP0907 FOODWARMER, BUILT-IN 5V PP0908 FOODWARMER, BUILT-IN 208V 3 PP0909 FOODWARMER, BUILT-IN 240V P FOODWARMER, FREE STANDING 5V P FOODWARMER, FREE STANDING 230V B A C B C A C BNB SCREEN SGBNB4 BNB FLUSH WORK TOP SGBNB4 BNB PAN SGBNB4 BNB PAN SGBNB4 FLAT TOP B A C B C A C BNB SCREEN SGBNB8 BNB FLUSH WORK TOP SGBNB8 BNB PAN SGBNB8 BNB PAN SGBNB8 FLAT TOP 8 A58004-C BNB HEAT LAMP COVER PLATE 9 PP0023 SCREW 0-24 X 3/8 SELF TAPPING SCREW 0-24 X 3/8 TH SLOT A C SCOOPED PAN LINER DIVIDER SG FOODWARMER, 0 X 8 5V MARSHALL 3 PP0995 SWITCH, ROCKER SPST (I-0) FITTING, /2 EMT X MALE NPT 5 A C CONDUIT, SGBNB EMT 6 A C SWITCH BOX, FRONT SGBNB MARSHALL HEAT LAMP 7 A C SWITCH BOX, BACK SGBNB MARSHALL HEAT LAMP 8 9 A C A C TOP WORKSHELF, ENTRANCE BOX SGBNB4 MARSHALL TOP WORKSHELF, COVER SGBNB4 MARSHALL A C A C TOP WORKSHELF, ENTRANCE BOX SGBNB8 MARSHALL TOP WORKSHELF, COVER SGBNB8 MARSHALL B C TOP WORKSHELF WELDMENT SGBNB4 20 B C TOP WORKSHELF TOP WELDMENT SGBNB4 WITH MARSHALL HEAT LAMP B C TOP WORKSHELF WELDMENT SGBNB8 B C TOP WORKSHELF WELDMENT SGBNB8 WITH MARSHALL HEAT LAMP 2 B WIRING HARNESS, TOP WORKSHELF MARSHALL HEAT LAMP 22 P BUSHING, STRAIN RELEIF - SCREW CABLE 23 P TERMINAL, RING BLUE #0 24 P60707 WIRE CLAMP, 3/8 NYLON 25 P GROMMET, RUBBER.50 ID 26 PP0693 SCREW, 0-24 X 3/8 THRUSS HEAD PHILLIPS 27 PP0699 SCREW, 0-24 X 3/4 ROUND HEAD PHILLIPS STAINLESS 28 A C TOP WORKSHELF BACK COVER SGBNB4 A C TOP WORKSHELF BACK COVER SGBNB8 29 P GROMMET, RUBBER.75 ID 30 P /4 HOLE PLUG 3 A BNB SPLASH BACK COVER WITH MARSHALL HEAT LAMP 32 NOT SHOWN B C TOP WORKSHELF ASSEMBLY SGBNB4 (INCL. ITEMS 9, 20, 28,29, & 30) B C TOP WORKSHELF ASSEMBLY SGBNB8 (INCL. ITEMS 9, 20, 28,29, & 30) B C TOP WK SHF ASSY SGBNB4 W/ HEAT LAMP (INCL. ITEMS 9, 2 THRU 27) B C TOP WK SHF ASSY SGBNB8 W/ HEAT LAMP (INCL. ITEMS 9, 2 THRU 27) L20-22 Rev 4 (06/06)

73 BNB Drawing T L20-22 Rev 4 (06/06) 73

74 U) DROP INS Drop Ins Drawing U Parts List ITEM # PART # PART DESCRIPTION 2 3 B C A40730-C A C FRONT PANEL TOP DECK, SG4DI, SG4RDI, SG4TDI SPLASH BACK, REAR SG4DI, SG4RDI, SG4TDI FRONT PANEL, SG4DI, SG4RDI, SG4TDI A C A C A C FRONT PANEL TOP DECK, SG8DI SPLASH BACK, REAR SG8DI FRONT PANEL, SG8DI 4 PP0023 SCREW 0-24 X 3/8 SELF TAPPING 74 L20-22 Rev 4 (06/06)

75 Drop Ins Drawing U L20-22 Rev 4 (06/06) 75