Spare parts Pipesystems / Pre-Wall Installation Catalogue 01/2018.

Transcription

1 Spare parts Pipesystems / Pre-Wall Installation Catalogue 01/2018

2 Informationen Content Product Discount Range Range Page Information 3 Spare parts Piping systems FRIATHERM rigid Bonding system for drinking water networks FRIATHERM multi Push-fit system for drinking water and heating networks FRIATHERM uni Press-fit system for drinking water and heating networks Spare Parts Spare Parts Spare Parts Spare parts Pre- and In-Wall installation Spare Parts 16 Product overview and measures Toilet flushing cisterns For front operation date of production before 12/2007, for large toilet operation panel: Model F 100, F 101, F 104 For front operation date of production since 09/2007, for large toilet operation panel: Model F 102, F 106, F 500, F 502 For front operation, small toilet operation panel: Model F 300, F 301, F 302, F 303, F 400, F 401, F 402 Electrical and pneumatic toilet operation panels for front operation For top operation, large toilet operation panel: Model F 200, F 201 Urinal elements Urinal elements /2004; lower valve part made of plastic Exchange Set for reparation of urinal operation units, edition /2004 Urinal elements date of production 08/ /2009; lower valve part made of metal Urinal elements date of production since 08/2009 for cartridge valve technology Article overview 54 * In general: The first two figures of the Ref.-No always shows to which product range the product belongs.(e.g.: = product range 55).. 2

3 Informationen Terms of Delivery FRIATEC AG - Division Technische Kunststoffe 1. Scope 1.1 Terms and conditions as listed below apply to all deliveries. Other conditions do not automatically become contractual, even if not expressly contradicted by us. 1.2 Our delivery and payment terms apply only to companies as defined under 13 BGB [German civil code], public law entities, and separate public estates. 2. Conclusion of a Contract 2.1. Our quotations are not binding. A contract is made only when we confirm an order in writing. Our written order confirmation controls content and size of the order Alterations to the technical execution of ordered goods are acceptable unless they constitute essential functional changes or the customer proves that the alterations are unacceptable We will accept liability for the quality of an item only if this has been expressly stated in our order confirmation or in our advertisements. 3. Delivery 3.1. Delivery dates and deadlines are subject to ourselves being supplied appropriately and in good time Delivery deadlines are determined by the date of our order confirmation. They are regarded as fulfilled once the goods have left the factory or been released for shipment The deadline is extended if the customer desires changes retrospectively or if events occur for which we are not responsible. 4. Prices and Payment Conditions 4.1. Our prices are ex factory or ex warehouse, plus VAT. Insurance, packaging, shipment and customclearance charges are invoiced separately, unless expressly stated otherwise in our current pricelist If not agreed otherwise in writing, our invoices are payable immediately on receipt without deductions. The statutory rules apply in the event of default We reserve the right to accept bills of exchange and cheques in individual cases. No discount is offered when paying by bill of exchange. Bills of exchange and cheques are accepted only on account of performance. The claim is regarded as fulfilled only once payment has been cashed or credited. All expenses which may arise must be met by the customer We are authorised to demand immediate cash payment for all deliveries, if payment conditions are not adhered to, or in circumstances causing the credit worthiness of a customer to be questioned. A possible deferral caused by the acceptance of bills of exchange becomes null and void. The customer is obliged to pay cash immediately on returning the bill of exchange. In addition we are authorised to carry out any remaining deliveries against advance or warranty payment or to rescind the contract and demand compensation. We are furthermore authorised to stop the onward sale of goods to be delivered and to retrieve the goods at the customer s expense if we have rescinded the contract. 5. Passage of Risk The risk is transferred to the customer at the moment of the goods being ready for shipment and the notification thereof. This applies even if shipment is delayed due to circumstances not in our control. If there is no notification of readiness for shipment, the risk is passed to the transport company, and on to the customer no later than at the point of the goods leaving the factory or warehouse. This applies also if our own transport is used or carriage is paid. 3

4 Informationen 6. Formal Complaints, Claims, Limitation Period 6.1. The customer must immediately check goods received for any defects. Formal complaints must be lodged immediately on receipt of the goods, and no later than a fortnight after receipt, in writing. The same timeframe applies to hidden defects after discovery. There can be no claims for defects which have not been notified within the appropriate period When a claim is justified, we will choose either to repair or replace the goods. If we do not rectify the defect or provide a substitute within an appropriate period, or following no more than two attempts, the customer is authorised to rescind the contract or demand a reduction in the purchasing price. It is not possible to rescind if there is only an insignificant violation on our pari The limitation period for claims is a) 5 years for building materials which have been installed and have caused defects within a pipe system. b) 1 year for delivery of other new goods to contractor c) 2 years for all others d) For delivery of second-hand goods to companies, there is no liability for defects. e) By way of derogation from b) - d) the statutory periods shall apply for claims for compensation due to a defect for which we are responsible for - damages due to physical injury to life, body or health, which are based on gross negligence by us or deliberate or gross negligence by one of our legal representatives or one of our agents or - damages, which are based on gross negligence by us or deliberate or gross negligence by one of our legal representatives or one of our agents The limitation period for claims for compensation commences on delivery of the goods; where an acceptance is required, then from acceptance The statutory period of limitation for replaced or subsequently rectified merchandise does not recommence even in cases of goodwill. Should defects be acknowledged in exceptional cases, such acknowledgments shall only apply to those defects that were the subject of a request for subsequent fulfilment. 7. Reservation of Ownership 7.1. Our deliveries are all subject to reservation of ownership. The goods remain in our ownership until payment of all claims arising from our business relationship with the customer is made. With an account current the reserved ownership constitutes the security for our balance claim The customer is authorised to resell delivered goods within the framework of his or her ordinary business procedures. He or she may not however pledge or transfer the conditional commodity by way of security In the event of resale the customer assigns to us all claims including all subsidiary rights which arise from the resale. This applies without taking into consideration whether he or she resells the conditional commodity unaltered, unprocessed, or in conjunction with other items. If the resale takes place including goods not owned by us, the assigning applies only up to the value of the conditional commodity. The value is determined according to our sales prices Processing of the conditional commodity always occurs according to 950 BGB for us as manufacturers, but without obligation. The processed goods constitute the conditional commodity as part of these conditions. If the conditional commodity is processed together or is irretrievably mixed up with other items not owned by us, we will gain co-ownership of the new item at a ratio of conditional commodity invoice value to the invoice value of other used goods at the time of processing and mixing. The co-ownership rights thus created apply as conditional commodity in the context of these conditions. The customer is obliged, if requested by us, to point out our ownership rights to the prospective buyer The customer is authorised to collect the claim from the resale notwithstanding our own collection authorisation. While the customer meets his payment obligations appropriately, we will not put the claim into force. The customer has to inform us of the debtors of the assigned claims and to notify the assignment to them. Our right of informing third-party debtors of the assignment will not be affected by this. The customer is not allowed to assign the claim against third-party debtors to third parties or to negotiate an assignment ban with the third-party debtor. 4

5 Informationen 7. Eigentumsvorbehalt (Fortsetzung) 7.6. The customer is obliged to notify us immediately and in the quiekest way possible about a pledge or any other infringement of our security rights by third parties. The customer is obliged to hand over to us all documents required to preserve our rights, and to compensate us for any costs arising from a possible Intervention We pledge to release existing securities of our choice up to the point where their value exceeds the claims to besecured by more than 10% The customer is obliged to insure the goods for the duration of our reservation of ownership. 8. Acts of God Right to Rescind If we are prevented from fulfilling our terms of delivery by acts of God or other circumstances not within our control, or if the fulfilment of our obligations becomes too great a burden for these reasons, we are authorised to rescind the contract. Compensation claims by the customer in such circumstances are not permitted. The right to rescind is effective also if the delivery period was initially extended. 9. Other Limitations of Liability 9.1. We are liable for any violations of life, body or health for which we are accountable in accordance with legal requirements For other damages the following applies: a) We are liable for damages based on gross negligence by us or deliberate or gross negligence by our legal representatives or assistants in accordance with legal requirements. b) For damages based on the violation of essential contractual obligations based on negligence by us, our legal representatives or assistants, our liability is limited to the predictable contractual damage up to a maximum of the value of the delivered item. c) Claims for other damage on violating subsidiary obligations or inessential obligations based on negligence are excluded. d) Claims for damages for delay caused by negligence are excluded. The customer s legal rights on completion of an appropriate period of time remain unaffected Liability exclusions or limitations do not apply if a defect has been deliberately concealed by us or if we have offered warranty on the quality of the item A customer s claim for compensation of time or costs invested in vain instead of compensation in place of time or costs, and the liability according to the product liability law remain unaffected. 10. Non-assignment clause Unless something different has been expressly agreed with the customer, the customer is not authorised to transfer rights from the contract to third parties without our agreement. 11. Applicable rights, Place of Jurisdiction Only German law applies under the exclusion of UN purchasing rights Exclusive place of jurisdiction for disagreements between contract parties is Mannheim, if the customer is a merchant, a legal person of public law or a special asset, or if the customer does not have a place of jurisdiction in Germany. We do however reserve the right to proceed against a customer who does not have a general place of jurisdiction in Germany within other courts of our choice. September 2016 FRIATEC Aktiengesellschaft Division Technische Kunststoffe Steinzeugstraße Mannheim Telefon

6 Informationen Notes to this price list W Pictures shown may deviate from actual product W This price list can be requested from us in DATANORM format (4.0) or in PDF format ( info-gebaeudetechnik@friatec.de) W This pricelist supersedes all pricelists so far released W All prices indicated in this pricelist are recommended retail prices in EURO, exclusive of VAT W All articles listed may be obtained from specialised wholesalers only W Technical modifacations as well as alterations in terms of dimensions and/or measurements excepted W All articles may be obtained in package units only W For misprints we accept no liability Terms of delivery: All transactions are subject to our General Terms and Conditions of Delivery and Payment. These are available for inspection, download and printing at: -> Technical Plastics -> Seminars -> Terms of Delivery. Internet Product documents From our website FRIATEC AG you can download for the product ranges Piping systems and Pre- and In- Wall installation descriptions, novelties as well as brochures and technical manuals. 6

7 Informationen 7

8 FRIATHERM rigid fittings FRIATHERM rigid Bonding system for drinking water networks Fittings and accessories 9 Transitions, external thread, short 9 Union couplings, external thread 9 Flanges 9 FRIATHERM Component+ adhesive 10 Transition sleeves 11 Pipes - 20 cm 11 FRIATHERM transitions flexible, external thread 12 Flat gaskets 13 Assembly instructions 13 FRIATHERM multi / FRIATHERM uni Push-fit system / Press-fit system for drinking water and heating networks Fittings and tools 14 Transitions, external thread 14 Tools for press-fit connections 14 8

9 P P Bonding system for drinking water FRIATHERM rigid FRIATHERM rigid fittings Transitions, external thread, short for drinking water pipelines; produced according to DIN 8080 and 8079; with bonded connection for FRIATHERM rigid. Pipe Ref.No. d PN/SDR Type PU Order qty dimension d 16 x 2, x R ½ 25/9,0 tin-coated brass 1 d 20 x 2, x R ½ 25/9,0 tin-coated brass 1 d 25 x 2, x R ¾ 25/9,0 tin-coated brass 1 d 32 x 3, x R 1 25/9,0 tin-coated brass 1 Union couplings, external thread for transitions from threaded connections of valves, equipment and pipes in drinking water pipelines; produced according to DIN 8080 and 8079; consisting of bonding sleeve, union nut (tin-coated brass), flat gasket (EPDM) and threaded nipple (tin-coated brass). Pipe dimension Ref.No. d PN/SDR Thread union nut Type PU Order qty d 40 x 4, x R 1 ¼ 25/9,0 R 2 tin-coated brass 1 d 50 x 5, x R 1 ½ 25/9,0 R 2 ¼ tin-coated brass 1 d 63 x 7, x R 2 25/9,0 R 2 ¾ tin-coated brass 1 Flanges for transitions from threaded connections to valves, equipment and pipes in drinking water pipelines; produced according to DIN 8080 and 8079; consisting of standard flange, backing ring with bonding sleeve and flat gasket (fiber). Pipe dimension Ref.No. d PN/SDR Holes Type PU Order qty d 40 x 4, /9,0 4 flat gasket 1 d 50 x 5, /9,0 4 flat gasket 1 d 63 x 7, /9,0 4 flat gasket 1 d 75 x 5, /13,6 4 flat gasket 1 d 90 x 6, /13,6 8 flat gasket 1 9

10 Bonding system for drinking water FRIATHERM rigid FRIATHERM rigid fittings FRIATHERM Component+ adhesive for high-strength FRIATHERM rigid bonded joints, fittings and adapters. Pipe Ref.No. Type PU Order qty dimension d g tin (125 ml) 1 d g tin (400 ml) 1 FRIATHERM fittings and TECEquickpipe pipes Establishing a press-fit welding joint Glued connections of TECEquickpipe pipes and FRIATHERM rigid fittings in dimensions d16 to d90 can be made. For that the following conditions are to be fulfil: W our FRIATEC Component+ solvent cement is used exclusively W appropriate tools and materials are used W the pressure levels specified in the planning documentation of the installed TECEquickpipe network are observed at all times. Note: Combinations of TECEquickpipe fittings with FRIATHERM rigid pipes are not allowed. W Pipe cutting W Deburring W Surface and adhesive must be kept at 0 C during gluing process W Surface to be cleanded with grease-free cloth W Apply Component+ 10 W Push parts together, adjust and hold in place for at least 5 seconds W Allow to set for 2 minutes W 10 C 6 bar after 30 min W 10 C 15 bar after 120 min W 10 C 15 bar after 240 min

11 P Bonding system for drinking water FRIATHERM rigid FRIATHERM rigid fittings Transition from FRIATHERM rigid pipes d 15, d 22, d 28 to d 16, d20, d 25 d d Ref.No. 15/ / / d Ref.No d Ref.No. 16 x ½ x ½ x ¾ FRIATHERM rigid pipe from 1982 to 1989 FRIATHERM rigid transition sleeve FRIATHERM rigid pipe as from 1990 FRIATHERM rigid transitions, external thread, short Transition sleeves for outer diameters d 15, d 22, d 28 for transition to FRIATHERM rigid pipes produced until the year These pipes have had, compared to today's range (d 16, d 20, d 25), different outer diameters (d 15, d 22, d 28). Pipe dimension Ref.No. d PU Order qty d 16 x 1, /16 1 d 22 x 2, /20 1 d 28 x 3, /25 1 Pipes - 20 cm FRIATHERM rigid pipe sections 20 cm. Pipe dimension Ref.No. DN d PN/SDR PU Order qty d 16 x 2, /9,0 1 d 20 x 2, /9,0 1 d 25 x 2, /9,0 1 11

12 Bonding system for drinking water FRIATHERM rigid FRIATHERM transitions flexible FRIATHERM flexible (Polybuten-pipes) up to 1999 d d 16 x 2,0 20 x 2,3 16 x 2,2 20 x 2,8 FRIATHERM transitions flexible, external thread for transition to FRIATHERM flexible pipe Polybuten (PB); consisting of: d 16 mm transition 16 x ½; support bush 16 x 2,0 mm and 16 x 2,2 mm d 20 mm transition 20 x ½; support bush 20 x 2,3 mm and 20 x 2,8 mm Pipe dimension d 16 x 2,0 d 16 x 2,2 d 20 x 2,3 d 20 x 2,8 Ref.No. d PU Order qty x ½ x ½ 1 Assembly instruction for FRIATHERM transitions flexible, external thread Note: A preparation of the pipe ends is not necessary due to the design of the support bush. 12

13 Bonding system for drinking water FRIATHERM rigid FRIATHERM rigid spare parts Flat gaskets suitable for union couplings and valve connectors. Ref.No. d PU Euro/ unit ½ (da = 18, di = 14, s = 2) ¾ (da = 24, di = 17, s = 2) (da = 30, di = 21, s = 3) ¼ (da = 38, di = 27, s = 3) ½ (da = 44, di = 32, s = 3) (da = 55, di = 42, s = 3) ¼ (da = 62, di = 46, s = 3) ¾ (da = 78, di = 60, s = 3) 1 Classification flat gaskets Ref.No. Fitting connectors with Fitting connectors with Union couplings, external thread nal thread Union couplings, inter- bonded nipple bonded socket d 16 x R ½ d 20 x R ¾ d 16 x ¾ d 16 x R ½ d 16 x R ½ d 25 x R d 20 x R d 20 x R ½ d 20 x R ½ d 32 x R 1 ¼ d 25 x R 1 ¼ d 25 x R ¾ d 25 x R ¾ d 32 x R 1 ½ d 32 x R d 32 x R d 40 x R d 40 x R 1 ¼ d 40 x R 1 ¼ d 50 x R 2 ¼ d 50 x R 1 ½ d 50 x R 1 ½ d 63 x R 2 ¾ d 63 x R d 63 x R 2 FRIATHERM rigid assembly instructions Pipe cutting Pipe cutting Pipes are generally cut by means of a roller pipe cutter or by a mitre saw. Only use roller pipe cutters suitable for plastic pipes. Do not use pipe scissors. Deburring Deburring Use reamers depending on the relevant dimensions W Inside and outside chamfering tool d mm W Chamfering tool d mm Standard reamers/chamfering tools suitable for plastic pipes can be used 13

14 P Press-fit/Push-fit system drinking water / heating systems FRIATHERM multi / FRIATHERM uni FRIATHERM multi fittings and tools No push-fit fittings are available for FRIATHERM multi pipes. Transitions, external thread Existing FRIATHERM multi pipes can be further processed with the following transitions to the FRIATHERM uni press system. for drinking water and heating lines composed of FRIATHERM uni and FRIA- THERM multi pipes; material: tin-coated brass, pre-assembled press-fit bush made of stainless steel, with inspection window Pipe dimension Ref.No. d Product PU Order qty d 16 x 2, x R ½ multi/uni 1 d 20 x 2, x R ½ multi/uni 1 d 26 x 3, x R ¾ multi/uni 1 d 32 x 3, x R 1 uni 1 d 40 x 3, x R 1 ¼ uni 1 d 50 x 4, x R 1 ½ uni 1 d 63 x 4, x R 2 uni 1 Loan tools for press connections Processing the loan tool for press connections Chamfering and calibration tools The tools are provided on loan for a maximum of 14 days and must be returned to FRIATEC AG after work has been completed. After the loan period, a rental fee / day will be charged. The tools can not be purchased. Note for FRIATHERM multi: In dimensions d 16 and d 20 the FRIATHERM multi tube can be pressed directly with the FRIATHERM uni transitions. To prepare a FRIATHERM multi tube d 25 for a press connection with a FRIA- THERM uni transition d 26, the special calibration and deburring tool (part no ) must be used. Pipe dimension Ref.No. Figure d Product Type PU Euro/ unit Chamfering and calibration tool with handle 1 d a 16/20/26 multi/uni d b 25/26 multi d b 32 uni d b 40 uni d c 50/63 uni Chamfering and calibration tool without handle Chamfering and calibration tool without handle Chamfering and calibration tool without handle Chamfering and calibration tool with handle

15 P Press-fit/Push-fit system drinking water / heating systems FRIATHERM multi / FRIATHERM uni Loan tools for press connections Tools for press-fit connections (rental basis) Notes: W d 16 - d 40 mm H-press contur have to be used W d 50 - d 63 mm TH-press contur have to be used MAP2L press jaws are only suitable for the mini battery press machine MAP2L Pipe dimension Ref.No. Figure d Type Type PU Euro/ unit d a Mini-batter-presser MAP2L 1 d b 16 Pressing jaws MAP2L H-Kontur 1 d b 20 Pressing jaws MAP2L H-Kontur 1 d b 26 Pressing jaws MAP2L H-Kontur 1 d b 32 Pressing jaws MAP2L H-Kontur 1 E/A Press jaws Pipe dimension Ref.No. Figure d Type Type PU Euro/ unit d b 16 Pressing jaws E/A H-Kontur 1 d b 20 Pressing jaws E/A H-Kontur 1 d b 26 Pressing jaws E/A H-Kontur 1 d b 32 Pressing jaws E/A H-Kontur 1 d b 40 Pressing jaws E/A H-Kontur 1 d b 50 Pressing jaws E/A TH-Kontur 1 d b 63 Pressing jaws E/A TH-Kontur 1 List of compatible pressing machines for E/A press jaws The FRIATHERM uni E/A pressing jaws are suitable for all standard, standard electrical radial presses / pressing machines with a constant pushing force of 32 to 40 kn. Manufacturer Machine CBC EUROPRESS 2001, Europress 98 Geberit / Mapress Holger Clasen PWH 75, MPF2 Akku-Presshandy APH Klauke UAP1, UAP2, UNP2, UP2EL14, UAP4L, HPU2, PKUAP3, UP75 EFP 1 (bis Ende 1995), EFP 2 (drehbarer Kopf ab Serie 30001), ECO 1 Pressboy 230V, Novopress Rems EFP 201, EFP 202, AFP 201, AFP 202, ECO 201, ACO 201, ECO 202, ACO 202, ACO 1 Pressboy 12V, ECO 203, ACO203 Akku-Press, Akku-Press ACC, Power-Press, Power-Press ACC, Power Press SE, Power Press XL ACC, Power Press 570, Akku-Press S403, Power-Press E, Power Press 2000 Ridgid PF 300, RP10S, RP10B, RP 10-S 230V, RP V, RP 300-B, RP 10-B Roller Multipress, Multipress ACC, Uni-Press, Uni-Press ACC, Uni-Press E, Uni-Press 2000 Rothenberger Romax 3000, Romax 4000, Romax Pressliner, Romax Eco, Romax AC ECO Uponor (Unicor) UP 63, UP 75, UP50EL Viega Typ 2, Typ 3, PT2-AH, PT2-EH, PT3-AH, PT3-EH, Pressgun 4E + 4B, Akku-Presshandy Virax P20+, P22+, P25+, P30+ 15

16 Spare Parts Pre- and In-Wall Installation Content Spare parts Pre- and In-Wall Installation Overview operation panels 18 Product overview and measures 18 Toilet flushing cisterns For front operation date of production before 12/2007, for large toilet operation panel: Model F 100, F 101, F Interior 20 Modernisation set with large toilet operation panel model F 102 white-alpine 21 Retrofit set for operation panel model F102, without operation panel 22 Flush pipe bend Repair kit, Inliner 23 Additional spare parts 24 For front operation date of production since 09/2007, for large toilet operation panel: Model F 102, F 106, F 500, F Interior 26 Flush pipe bend Repair kit, Inliner 27 Model F 102 large toilet operation panels for front-operation, two-button version 28 Model F 500 large toilet operation panels for front operation, two button version stainless steel 28 Accessories for model F 102, F 106, F 500, F Additional spare parts 29 For front operation, small toilet operation panel: Model F 300, F 301, F 302, F 303, F 400, F 401, F Interior 31 Flush pipe bend Repair kit, Inliner 32 Model F 300 small toilet operation panels for front-operation, two-button version 33 Model F 301 small toilet operation panels for front-operation, single-button version 33 Model F 302 small toilet operation panels for front-operation, two-button version 33 Model F 303 small toilet operation panels for front-operation, single-button version 34 Model F 401 small toilet operation panels for front-operation, single-button version stainless steel 34 Accessories for model F 300, F 301, F 302, F 303, F 304, F 400, F 401, F Additional spare parts 35 Electrical and pneumatic toilet operation panels for front operation 36 For top operation, large toilet operation panel: Model F 200, F Interior 39 Flush pipe bend, Inliner 40 Model F 200 large toilet operation panels for top-operation, two-button version 40 Accessories for model F 200, F Additional spare parts 41 16

17 Spare Parts Pre- and In-Wall Installation Content Spare parts Pre- and In-Wall Installation Urinal elements Spare part lists urinal elements /2004; lower valve part made of plastic: FRIABLOC /FRIASET/WIMO /FRIAPLAN 42 Urinal support plates: for manual actuation, IR actuation battery 6V and 230V 42 Water supply and outlet complete 43 Urinal operation panels for manual actuation Ref.No. 3360xx 44 Urinal operation panels for IR actuation, battery 6V Ref.No. 3365xx 45 Urinal operation panels for IR actuation, 230V Ref.No. 3370xx 46 Exchange Set for reparation of urinal operation units, edition / Exchange set for manual actuation 47 Exchange set for IR actuation, battery 6V 47 Exchange set for IR actuation 230V 47 Spare part lists urinal elements date of production 08/ /2009; lower valve part made of metal: FRIABLOC /FRIASET/WIMO /FRIAPLAN 48 Urinal support plates: for manual actuation, IR actuation battery 6V and 230V 48 Water supply and outlet complete 49 Urinal operation panel for manual actuation Ref.No xx 50 Urinal operation panel with IR actuation, battery 6V Ref.No xx 51 Urinal operation panel with IR actuation, 230V Ref.No xx 52 Spare part lists urinal elements date of production since 08/2009 for cartridge valve technology: FRIASET 53 Urinal support plates: for manual actuation, IR actuation battery 6V and 230V, relative conductivity 6V and 230 V 53 17

18 re- and In-Wall Installation Overview operation panels Product overview and measures Large toilet operation panels for front operation [cm] F 102 F 500 Small toilet operation panels for front operation F 300 F 301 F 302 F 303 F 304 F 401 Toilet operation panels for top operation F 200 Urinal operation panel for manual actuation, IR actuation (6V or 230V) Ref.No xx Manual actuation Ref.No xx IR actuation 6 V or 230 V 18

19 re- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /WIMO/FRIAPLAN Universal flushing cisterns for front operation date of production before 12/2007, for large toilet operation panel: Model F 100, F 101, F 104 Model F 100 Ref.No. 3310xx Model F 101 Ref.No Model F 104 Ref.No Ref.No Ref.No Model F 100 (ff.) is no longer available, see Modernisation set (Ref.No ) xx = Colourcode Ref.No / 90.A Ref.No / 95.A Ref.No Ref.No Ref.No Ref.No Ref.No Ref.No Ref.No Ref.No Ref.No Ref.No / 90.A Ref.No / 90.A Ref.No (1000 mm) Ref.No (1100 mm) Ref.No Ref.No / 95.A Ref.No Ref.No Ref.No / PB.A

20 9L 6L 9L 6L P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /WIMO/FRIAPLAN Interior Universal flushing cisterns date of production before 12/2007 Pos. 20 Pos. 26 Pos. 27 Pos. 22 Pos. 21 Pos. 24 Pos. 25 Pos. 29 Pos. 28 Pos. 23 Pos. 31 Pos. 30 Ref.No. Line Type PU Order qty Fixing flaps for control panel (1 set = 2 pieces) 1 21 Repair kit for flush pipe bend see following page Lip sealing for flush pipe d Hydraulic inlet valve Reinforced tube, 400mm, 3/8 x 3/8 union nut, bis Bj. 05/ Reinforced tube, 300 mm with knurled nut, ab Bj. 04/ Angle valve short ½, front operated (R ½) Actuation and fixing bridge for toilet outlet valve (front operated) Stiffening bridge with bracket for inlet valve for front operation (1 set = 2 pieces) Outlet valve with valve seat incl. bottom sealing and outlet gasket Spare outlet gasket (da = 61 mm, di = 30 mm, t = 3 mm) Rollring for bottom valve (45x4 mm) Extension set (8-18 cm) for model F 100, F 101, F

21 Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /WIMO/FRIAPLAN FRIATEC concealed flushing cisterns with operation unit model F 100 will be retrofit with the modernisation set (Ref.No ) into operation unit F 102 Model F 100 Ref.No alpine white Modernisation set Ref.No Model F 100 Ref.No. 3310xx Retrofit set Ref.No Model F 102 Ref.No. 3307xx + Modernisation sets for large toilet operation panel model F 102 alpine-white for front-operation, two button version consiting of: W operation panel F 102 colour alpin-white with two buttons for dual-volume flushing W installation frame, including anti-removal lock W cover panel for inspection opening with bell crank and threaded bush W outlet valve with valve seat W fixing material Ref.No. Type PU Order qty Toilet modernisation set with operation panel F 102, alpine-white 1 21

22 P P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /WIMO/FRIAPLAN Toilet retrofit set for operation panel model F 102, F 500, without operation panel consisting of: W cover panel for inspection opening W outlet valve with valve seat Note: The operation panel model F 102 (Ref.No. 3307xx) or F 500 (Ref.No ) need to be ordered separately. Ref.No. Type PU Order qty Toilet retrofit set without panel 1 Model F 102 large toilet operation panels for front-operation, two-button version consisting of: W operation panel with two buttons for dual-volume flushing W installation frame, including anti-removal lock W fixing material Ref.No. Type PU Order qty (set) silk gloss, chromium-plated pergamon manhattan bahamabeige 1 Model F 500 large toilet operation panels for front operation, two button version stainless steel consiting of: W operation panel with two buttons for dual-volume flushing W installation frame, including anti-removal lock W fixing material Ref.No. Type PU Order qty (set) Stainless steel, brushed 1 Further information about the electrical and pneumatic toilet operation see page 36 22

23 P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /FRIAFIX /FRIASET/ WIMO/FRIAPLAN Flush pipe bend Repair kit Flush pipe bend Repair kit flush pipe bend 06/ /1998 Pos. 23 Repair kit flush pipe bend 06/ /2000 Pos. 24 Repair kit flush pipe bend up to 11/2000 Pos. 25 Pos. 21 Pos Transition piece d 52/d Pipe d 52, 13 cm 1. Long couplers d 52 (shortend) 2. Transition seal 3. Transition piece d 52/d Transition piece d 52/d Transition piece d 52/d Transition seal 3. Transition seal 3. Transition seal 5. Short flush pipe bend 4. Short flush pipe bend 4. Short flush pipe bend Please note the assembly instructions Ref.No. Line Type PU Order qty Flush pipe bend since 11/2000 (= blue) Lip sealing for flush pipe d Repair kit flush pipe bend 06/1995 until 06/ Repair kit flush pipe bend 06/1998 until 10/ Repair kit flush pipe bend from 11/ Inliner Damage to the cistern body, regardless of what caused it, can be corrected promptly and without interfering with the existing tiling. Ref.No. Type PU Order qty Inliner Outlet valve for Inliner 1 23

24 Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /WIMO/FRIAPLAN Additional spare parts Universal flushing cisterns date of production before 12/2007 Ref.No. Line Type PU Order qty ) 40 Toilet outlet bend d 90/110 with protective plug - not for FRIAPLAN ) 41 Toilet outlet bend clip with fastening clip (= black) since 08/ not for FRIAPLAN ) 42 Toilet outlet bend - only for FRIAPLAN Lip sealing d 90 for outlet bend and connection bend 1 1) to be discontinued 24

25 re- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /FRIASET/WIMO Universal flushing cisterns for front operation date of production since 09/2007, for large toilet operation panel: Model F 102, F 106, F 500, F 502 Model F 102 Ref.No. 3307xx Model F 106 Ref.No Model F 500 Ref.No Model F 502 Ref.No xx = Colourcode Ref.No / 90.A Ref.No / 95.A Ref.No / 90.A Ref.No Ref.No Ref.No Ref.No / PB.A Ref.No / 90.A Ref.No

26 Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /FRIASET/WIMO Interior Universal flushing cisterns, date of production since 09/2007 Ref.No. Line Type PU Order qty Fixing flaps for control panel (1 set = 2 pieces) 1 21 Repair kit for flush pipe bend see following page Lip sealing for flush pipe d Hydraulic inlet valve Reinforced tube, 400mm, 3/8 x 3/8 union nut, bis Bj. 05/ Reinforced tube, 300 mm with knurled nut, ab Bj. 04/ Angle valve short ½, front operated (R ½) Fixing rail with holding down clamp Stiffening bridge with bracket for inlet valve for front operation (1 set = 2 pieces) Cover panel for inspection opening with bell crank and threaded bush Outlet valve with valve seat incl. bottom sealing and outlet gasket Spare outlet gasket (da = 61 mm, di = 30 mm, t = 3 mm) Rollring for bottom valve (45x4 mm) 1 26

27 P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /FRIAFIX /FRIASET/ WIMO/FRIAPLAN Flush pipe bend Repair kit Flush pipe bend Repair kit flush pipe bend up to 11/2000 Pos. 23 Pos. 21 Pos Long couplers d 52 (shortend) 2. Transition piece d 52/d Transition seal 4. Short flush pipe bend Please note the assembly instructions Ref.No. Line Type PU Order qty Flush pipe bend since 11/2000 (= blue) Lip sealing for flush pipe d Repair kit flush pipe bend from 11/ Inliner Damage to the cistern body, regardless of what caused it, can be corrected promptly and without interfering with the existing tiling. Ref.No. Type PU Order qty Inliner Outlet valve for Inliner 1 27

28 P P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /FRIASET/WIMO Model F 102 large toilet operation panels for front-operation, two-button version consisting of: W operation panel with two buttons for dual-volume flushing W installation frame, including anti-removal lock W fixing material Ref.No. Type PU Order qty (set) alpine white, glossy silk gloss, chromium-plated pergamon manhattan bahamabeige Panel alpine white (without installation frame and fixing material) 1 Model F 500 large toilet operation panels for front operation, two button version stainless steel consiting of: W operation panel with two buttons for dual-volume flushing W installation frame, including anti-removal lock W fixing material Ref.No. Type PU Order qty (set) Stainless steel, brushed 1 Accessories for model F 102, F 106, F 500, F 502 Pos 1 Pos 2 Pos 3 Ref.No. Line Type PU Order qty Installation frame complete, 2-button version (for dual-volume) Kit for operation and fixing bolts (2 pieces of each) and self-tapping screws (1 piece) Extension set (8-18 cm) for model F 102, F 106, F 500, F

29 Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /FRIASET/WIMO Additional spare parts Universal flushing cisterns, date of production since 09/2007 Ref.No. Line Type PU Order qty ) 40 Toilet outlet bend d 90/110 with protective plug - not for FRIAPLAN ) 41 Toilet outlet bend clip with fastening clip (= black) since 08/ not for FRIAPLAN ) 42 Toilet outlet bend - only for FRIAPLAN Lip sealing d 90 for outlet bend and connection bend 1 1) to be discontinued Further information about the electrical and pneumatic toilet operation see page 36 29

30 re- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIAFIX /FRIASET/WIMO/FRIA- PLAN Universal flushing cisterns for front operation, small toilet operation panel: Model F 300, F 301, F 302, F 303, F 400, F 401, F 402 Model F 300 Ref.No. 3324xx Model F 301 Ref.No. 3319xx Model F 302 Ref.No. 3326xx Model F 303 Ref.No. 3329xx Model F 304 Ref.No. 3339xx Model F 400 Ref.No Model F 401 Ref.No Model F 402 Ref.No xx = Colourcode Ref.No / 95.A Ref.No / 95.A Ref.No Ref.No / 90.A Ref.No / 90.A Ref.No / 90.A Ref.No / 90.A Ref.No / 90.A Ref.No / PB.A Ref.No Ref.No / PB.A Ref.No / PB.A Ref.No / PB.A Ref.No Ref.No Ref.No Ref.No Ref.No Ref.No Ref.No / 90.A Ref.No / 90.A Ref.No Ref.No

31 9L 6L 9L 6L P P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIAFIX /FRIASET/WIMO/FRIA- PLAN Interior Universal flushing cisterns Ref.No Pos. 20 Pos. 26 Pos. 23 Pos. 28 Pos. 29 Pos. 30 Pos. 21 Pos. 27 Pos. 22 Pos. 31 Pos. 25 Pos. 24 Ref.No. Line Type PU Order qty ) 20 Fixing flaps for control panel (1 set = 2 pieces) 1 21 Repair kit for flush pipe bend see following page Lip sealing for flush pipe d Hydraulic inlet valve Reinforced tube, 400mm, 3/8 x 3/8 union nut, bis Bj. 05/ Reinforced tube, 300 mm with knurled nut, ab Bj. 04/ Angle valve short ½, front operated (R ½) Mounting bridge Cover panel for inspection opening with bell crank and threaded bushes Outlet valve with valve seat incl. bottom sealing and outlet gasket Spare outlet gasket (da = 61 mm, di = 30 mm, t = 3 mm) Rollring for bottom valve (45x4 mm) 1 The following positions are only for toilet flushing cisterns with pre-assembled water connection (Ref.No , , , ) Ref.No. Line Type PU Order qty Reinforced tube for front operated toilet modules with knurled nut 1 1) to be discontinued 31

32 P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /FRIAFIX /FRIASET/ WIMO/FRIAPLAN Flush pipe bend Repair kit Flush pipe bend Repair kit flush pipe bend up to 11/2000 Pos. 23 Pos. 21 Pos Long couplers d 52 (shortend) 2. Transition piece d 52/d Transition seal 4. Short flush pipe bend Please note the assembly instructions Ref.No. Line Type PU Order qty Flush pipe bend since 11/2000 (= blue) Lip sealing for flush pipe d Repair kit flush pipe bend from 11/ Inliner Damage to the cistern body, regardless of what caused it, can be corrected promptly and without interfering with the existing tiling. Ref.No. Type PU Order qty Inliner Outlet valve for Inliner 1 32

33 P P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIAFIX /FRIASET/WIMO/FRIA- PLAN Model F 300 small toilet operation panels for front-operation, two-button version consisting of: W operation panel with two buttons for dual-volume flushing W installation frame W fixing material Ref.No. Type PU Order qty (set) alpine white, glossy ) 21-silk gloss, chromium-plated 1 1) to be discontinued Model F 301 small toilet operation panels for front-operation, single-button version consisting of: W operation panel with single button for start/stop flushing W installation frame W fixing material Ref.No. Type PU Order qty (set) alpine white, glossy 1 Model F 302 small toilet operation panels for front-operation, two-button version consisting of: W operation panel with two buttons for dual-volume flushing W installation frame W fixing material Ref.No. Type PU Order qty (set) alpine white, glossy 1 33

34 P P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIAFIX /FRIASET/WIMO/FRIA- PLAN Model F 303 small toilet operation panels for front-operation, single-button version consisting of: W operation panel with single button for start/stop flushing W installation frame W fixing material Ref.No. Type PU Order qty (set) ) 01-alpine white, glossy 1 1) to be discontinued Model F 401 small toilet operation panels for front-operation, single-button version stainless steel consisting of: W operation panel with single button for spring-mounted single volume flushing W installation frame, including anti-removal lock W fixing material Ref.No. Type PU Order qty (set) Stainless steel, brushed 1 Accessories for model F 300, F 301, F 302, F 303, F 304, F 400, F 401, F 402 Pos 1 Pos 3 Pos 2 Pos 4 Pos 5 Ref.No. Line Type PU Order qty ) 1 Installation frame FRIAFIX complete, two-button version (dual-volume flushing technology) ) 2 Installation frame FRIAFIX complete, single-button version (start/stop flushing technology) Operation bolt set (dual-volume flushing technology/ start-stop flushing technology) Set of quick release bolts with nuts (1 set = 2 pieces) Extension set (9-22 cm) for model F 300, F 301, F 302, F 303, F 304, F 400, F 401, F ) to be discontinued 34

35 Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIAFIX /FRIASET/WIMO/FRIA- PLAN Additional spare parts Universal flushing cisterns small toilet operation panel Ref.No. Line Type PU Order qty ) 40 Toilet outlet bend d 90/110 with protective plug - not for FRIAPLAN ) 41 Toilet outlet bend clip with fastening clip (= black) since 08/ not for FRIAPLAN ) 42 Toilet outlet bend - only for FRIAPLAN Lip sealing d 90 for outlet bend and connection bend 1 1) to be discontinued Further information about the electrical and pneumatic toilet operation see page 36 35

36 P P Pre- and In-Wall Installation Spare parts WC concealed cisterns for front operation The conversion of the pneumatic induction from model F 100 to model F 102 / F 500 is done with the following products: Pneumatic actuation kits for barriere-free areas for front operation, large toilet operation panel: model F 102, F 500 consisting of: W covering panel for inspection opening with pre-assembled pneumatic-actuation W air tube W blank tube W concealed wall-mounted push button, white W concealed socket Ref.No. Type PU Order qty Pneumatic kit 1 Outlet valve + for installation into all FRIATEC universal flushing cisterns with internal insulation against condensation, readjustable to 6-9 l at any time. Ref.No. Type PU Order qty Toilet outlet valve with bottom sealing (with valve seat) 1 + Model F 102 / F 500 large toilet operation panels for front-operation, two-button version consisting of: W operation panel with two buttons for dual-volume flushing W installation frame, including anti-removal lock W fixing material Ref.No. Type PU Order qty (set) alpine white, glossy Stainless steel, brushed silk gloss, chromium-plated pergamon manhattan bahamabeige 1 36

37 re- and In-Wall Installation Electric toilet induction für kleine Betätigungsplatten für große Betätigungsplatten Modell F 400 Art.Nr Modell F 402 Art.Nr Modell F 106 Art.Nr Modell F 502 Art.Nr Modell F 104 Art.Nr

38 re- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /FRIASET/WIMO/ FRIAPLAN Universal flushing cisterns for top operation, large toilet operation panel: Model F 200, F 201 Model F 200 Ref.No. 3320xx Model F 201 Ref.No xx = Colourcode Ref.No (850 mm) / 95.A Ref.No (1000 mm) Ref.No Ref.No Ref.No / 90.A Ref.No Ref.No Ref.No Ref.No / 90.A Ref.No / 90.A Ref.No Ref.No (1000 mm) Ref.No (850 mm) Ref.No / 95.A Ref.No Ref.No Ref.No / PB.A Ref.No / 90.A

39 9L 6L 9L 6L P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /FRIASET/WIMO/ FRIAPLAN Interior Universal flushing cisterns, top-operated Pos. 20 Pos. 23 Pos. 26 Pos. 31 Pos. 27 Pos. 25 Pos. 21 Pos. 24 Pos. 29 Pos. 28 Pos. 22 Pos. 32 Pos. 30 Ref.No. Line Type PU Order qty Fixing flaps for control panel (1 set = 2 pieces) 1 21 Repair kit for flush pipe bend see following page Lip sealing for flush pipe d Cap for inspection opening protector Hydraulic inlet valve Bracket for inlet valve for top operated toilet modules Operation for toilet outlet valve with threaded bush - top operated (1 set = 2 pieces) Outlet valve fixing kit, top operated (1 set = 2 pieces) Outlet valve with valve seat incl. bottom sealing and outlet gasket Spare outlet gasket (da = 61 mm, di = 30 mm, t = 3 mm) Rollring for bottom valve (45x4 mm) Retention strip Replacement: reinforced tube with knurled nut including hydraulic inlet valve and angle walve 1 39

40 P P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /FRIAFIX /FRIASET/ WIMO/FRIAPLAN Flush pipe bend Note: The flush pipe bend has to be shortened to the exact length. Ref.No. Line Type PU Order qty Flush pipe bend since 11/2000 (= blue) Lip sealing for flush pipe d 45 1 Inliner Damage to the cistern body, regardless of what caused it, can be corrected promptly and without interfering with the existing tiling. Ref.No. Type PU Order qty Inliner Outlet valve for Inliner 1 Model F 200 large toilet operation panels for top-operation, two-button version consisting of: W operation panel with two buttons for spring-mounted dual-volume flushing W installation frame, including anti-removal lock W fixing material Ref.No. Type PU Order qty (set) alpine white, glossy Special colours price-range I 1 40

41 P Pre- and In-Wall Installation Spare part lists concealed toilet flushing cisterns: FRIABLOC /FRIASET/WIMO/ FRIAPLAN Accessories for model F 200, F 201 Pos 1 Pos 2 Pos 3 Ref.No. Line Type PU Order qty Frame complete for top operated panel Kit of operation and fixing bolts and self-tapping screws for top operated panel (1 set = 2 pieces) Extension set (5-15 cm) for model F 200, F Additional spare parts Universal flushing cisterns Ref.No Ref.No. Line Type PU Order qty ) 40 Toilet outlet bend d 90/110 with protective plug - not for FRIAPLAN ) 41 Toilet outlet bend clip with fastening clip (= black) since 08/ not for FRIAPLAN ) 42 Toilet outlet bend - only for FRIAPLAN Lip sealing d 90 for outlet bend and connection bend 1 1) to be discontinued 41

42 re- and In-Wall Installation Spare part lists urinal elements /2004; lower valve part made of plastic: FRIABLOC /FRIASET/WIMO /FRIAPLAN Urinal support plates edition /2004: for manual actuation, IR actuation battery 6V and 230V Ref.No. 3360xx Ref.No. 3365xx Ref.No. 3370xx xx = Colourcode Ref.No Ref.No Ref.No Ref.No Ref.No Ref.No Ref.No Ref.No (1300 mm) 42

43 FRIATEC FRIATEC P Pre- and In-Wall Installation Spare part lists urinal elements /2004; lower valve part made of plastic: FRIABLOC /FRIASET/WIMO /FRIAPLAN Water supply and outlet complete edition /2004 Pos 21 Pos 20 Pos ,37 12,18 8,21 1,10,15, 19 2,16, ,25,26 22,34,38 20,28,33 27,29,35 7,11 6,14,31 30 Pos 20 Pos 21 FRIATEC Pos Pos. 29 Pos. 30 d 50 Pos 24 d 40 Pos. 28 Pos 25 FRIATEC Pos 26 Pos 27 Ref.No. Line Type PU Order qty O-ring 19 x 3 mm (2 pieces will be needed for installation of lower valve unit) Profile clamp for old version - no longer available; please see exchange set ) 22 Sieve with sealing ) 23 Self tapping screws for urinal (1 set = 2 pieces) ) 24 Urinal flush pipe with socket d 20 mm ) 25 Urinal flush pipe redirection device d 20 mm ) 26 Urinal flush pipe d 20 mm ) 27 Urinal flush pipe connector d 20 mm Urinal lower valve unit old version - no longer available; please see exchange set Rubber nipple d 52/d 40 mm for siphon angle for urinal modules Urinal siphon (final assembly kit) d 40 / d 50 mm 1 1) to be discontinued 43

44 Pre- and In-Wall Installation Spare part lists urinal elements /2004; lower valve part made of plastic: FRIABLOC /FRIASET/WIMO /FRIAPLAN Urinal operation panels for manual actuation Ref.No. 3360xx; edition /2004 Ref.No. Line Type PU Order qty Urinal upper valve unit for manual actuation old version - no longer available; reparation with exchange set Ref.No ) 2 Self tapping screws for urinal (1 set = 2 pieces) Operation bolts for urinal manual actuation Urinal operation panel for manual actuation 01-alpine white, glossy Installation wrench for operation panel ) 6 Urinal flush pipe d 20 mm ) 7 Urinal flush pipe connector d 20 mm Urinal siphon (final assembly kit) d 40 / d 50 mm Fixing screws for operation unit frame (1 set = 4 pieces), (M5x60) ) 10 Extension set, mm 1 1) to be discontinued 44

45 Pre- and In-Wall Installation Spare part lists urinal elements /2004; lower valve part made of plastic: FRIABLOC /FRIASET/WIMO /FRIAPLAN Urinal operation panels for IR actuation, battery 6V Ref.No. 3365xx; edition /2004 Ref.No. Line Type PU Order qty Upper valve unit for IR actuation old version - no longer available; reparation with exchange set Ref.No ) 21 Self tapping screws for urinal (1 set = 2 pieces) Urinal operation panel for IR actuation 01-alpine white, glossy Power supply unit with battery/ 6V old version - no longer available; reparation with exchange set Ref.No Installation wrench for operation panel V lithium DC photo battery CR P ) 26 Urinal flush pipe d 20 mm ) 27 Urinal flush pipe connector d 20 mm Urinal siphon (final assembly kit) d 40 / d 50 mm Fixing screws for operation unit frame (1 set = 4 pieces), (M5x60) IR actuation sensor old version - no longer available; reparation with exchange set Ref.No ) 31 Extension set, mm 1 1) to be discontinued 45

46 Pre- and In-Wall Installation Spare part lists urinal elements /2004; lower valve part made of plastic: FRIABLOC /FRIASET/WIMO /FRIAPLAN Urinal operation panels for IR actuation, 230V Ref.No. 3370xx; edition /2004 Ref.No. Line Type PU Order qty Upper valve unit for IR actuation old version - no longer available, reparation with exchange set Ref.No ) 41 Self tapping screws for urinal (1 set = 2 pieces) Urinal operation panel for IR actuation 01-alpine white, glossy Power supply unit 230V old version - no longer available; reparation with exchange set Ref.No Installation wrench for operation panel Adaptor for power supply unit 230V old version - no longer available; reparation with exchange set Ref.No ) 46 Urinal flush pipe d 20 mm ) 47 Urinal flush pipe connector d 20 mm Urinal siphon (final assembly kit) d 40 / d 50 mm Fixing screws for operation unit frame (1 set = 4 pieces), (M5x60) IR actuation sensor old version - no longer available, reparation with exchange set Ref.No ) 51 Extension set, mm 1 1) to be discontinued 46

47 P P Pre- and In-Wall Installation Exchange Set to repair urinal operation units, edition /2004 Exchange set for manual actuation for reparation purpose of urinal actuation version /2004; consisting of: W Urinal lower valve unit complete (metal version) W Fixing clips for urinal lower valve unit W Self tapping screws for urinal (1 set = 2 pieces) W Urinal upper valve unit for manual actuation (metal version) Ref.No. Type PU Order qty Manual actuation 1 Exchange set for IR actuation, battery 6V for reparation purpose of urinal actuation version /2004; consisting of: W Urinal lower valve unit complete (metal version) W Fixing clips for urinal lower valve unit W Self tapping screws for urinal (1 set = 2 pieces) W Urinal upper valve unit for lr actuation (metal version) W Power supply unit with battery/ 6 voltage W IR actuation sensor ready to connect (metal version) Ref.No. Type PU Order qty IR actuation battery / 6V V lithium battery 1 Exchange set for IR actuation 230V for reparation purpose of urinal actuation version /2004; consisting of: W Urinal lower valve unit complete (metal version) W Fixing clips for urinal lower valve unit W Self tapping screws for urinal (1 set = 2 pieces) W Urinal upper valve unit for lr actuation (metal version) W Adapter for 230V supply voltage W Power supply unit with 230 voltage W IR actuation sensor ready to connect (metal version) Ref.No. Type PU Order qty IR actuation 230V 1 47