Rearview Mirror with 4" Color LCD Monitor and Camera Package Model: RVMPKG4 (V2.0) User s Manual

Transcription

1 Rearview Mirror with 4" Color LCD Monitor and Camera Package Model: RVMPKG4 (V2.0) User s Manual Features: Rearview Mirror with 4" LCD Monitor Built-In Speaker Rearview Camera Input Auxiliary Video Input Automatically Displays Backup Camera Image Camera

2 Warnings 1. The product is intended to assist in safe driving and to allow the driver to have a broader rearview while in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to the country and their local traffic regulations. Do not use any features of this system to the extent it distracts you from safe driving. Your first priority while driving should always be the safe operation of your vehicle. Audiovox Electronics Corp. cannot accept any responsibility whatsoever for accidents resulting from failure to observe these precautions or safety instructions. 2. You are advised not to display the auxiliary video input while driving. This product must be installed and used only in accordance with these instructions. Any alteration of this product that enables it to be used in ways other than those stated in this manual could distract the driver and result in an accident or injury. Audiovox Electronics Corp. disclaims any liability that may result from a failure to install and operate as indicated in this manuals. Warning: Backing up vehicle Do not back up vehicle while watching the mirror/monitor screen. Always look in the direction of vehicle motion. Use the mirror/monitor as an aid in safety confirmation. The actual distance is shorter than it looks in the monitor. The range of image is limited. Beware of blind spots. 1

3 TABLE OF CONTENTS Warnings 1 Product description 2 Functions & operations 3 Operations 4 Volume control 4 LCD monitor brightness control 4 Maintenance 5 Troubleshooting 5 Product Description This Backup Camera/Monitor Package is designed to assist the driver by providing a clear and wide image of the area behind the vehicle whenever the vehicle is shifted into reverse. Never rely solely on this product to insure the area is clear of children and or obstructions. Use your monitor and look both ways. This is not intended to replace existing safety procedures, but add another safety tool for your vehicle. 2

4 Figure 1 I. Function and Operations Figure1 shows the function of rearview mirror. A: Rearview mirror E: Speaker volume control B: 4" LCD panel F: Auxiliary input switch (see below) C: Brightness control knob G: Speaker in rear of mirror D: Power indicator (Red when ignition is on) Auxiliary Input Switch: Auxiliary input switch: To access the 2 nd A/V input press the switch. Note: The parking brake must be engaged in order to view the 2 nd input. 3

5 II. Operations 1. Normal operation: The monitor will automatically display the rear observation camera image whenever the vehicle is shifted into reverse gear. The rear observation camera image turns off automatically any time the gear selector is moved out of the reverse position. 2. How to play an auxiliary video/audio signal: To play the auxiliary input, press the auxiliary input switch after the vehicle s parking brake is engaged (the auxiliary video/audio will only work when the parking brake is engaged). III. Volume Control The volume adjustment control is on the right side of the bottom of the rearview mirror. Rotating the wheel to the right will decrease the sound level. Rotating the wheel to the left will increase the volume.. IV. LCD Monitor Brightness Control The brightness adjustment control is on the left side of the bottom of the rearview mirror. Rotating the wheel to the right will decrease the brightness. Rotating the wheel to the left will increase the brightness. 4

6 Maintenance Though your Rearview mirror requires little care, you can still maintain its condition and performance following the procedures below. Keep your system away from excessive moisture, extreme heat or cold and magnetic fields. Keep liquids away from the display mirror. To avoid damage, do not place auxiliary devices or other objects on the top of the mirror. Occasionally clean the surface of the mirror with soft cloth moistened with water or window cleaner. Troubleshooting Symptoms The ON/OFF signal light <D> is not on after the car is started? No video signal appears while reversing the car? Video image is not sharp enough? Solutions 1. Check the installation-wiring diagram. 2. Ensure that the parallel red and black line from the control box is connected properly. 1. Check the LCD Contrast (Brightness) control knob whether the contrast knob is set too low 2. Check the rearview Camera lens. 3. Check the rearview Camera wiring and connection. 4. Check the cable from the rearview mirror is connected properly. Clean the lens of the camera. 5

7 2007 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y