TOOLS & TEST EQUIPMENT

Transcription

1 HUMIDITY Kele Provides Handheld Solutions for Verifying Your Installation Accuracy. CVC p HM40A1AB p AMI300 Series p TOOLS & TEST EQUIPMENT

2 Products manufactured in the United States Products that are new to the catalog ASG p DT-1K p /SERIES PAGE Data Loggers EL-USB Series Data Logger Lascar Data Logger Hand Held Devices TK100 Series Digital Thermometer TM99A Digital Handheld Thermometer DT-1K Digital Temperature Probe HM40A1AB Vaisala RH / Temperature Meter BR200 Extech Video Borescope Extech Handheld Infrared Thermometer Infrared camera Amphenol Advance Systems Handheld CO2 / Temperature Meter BLD7800 Amphenol Advance Systems Handheld Digital Hygrometer AQ100, AQ200 Series Environmental IAQ Meters BTU1100 Series Combustion Analyzer PCA3 Series Hand-Held Combustion Analyzer Kits CO10 Extech Carbon Monoxide Meter HD400 Extech Light Meter SL100, SL200 Series Portable Solarimeters HD100 Series Thermo-hygrometers LV100, VT100, VT200 Series Thermo-Anemometer CT100 Series Hand-Held Tachometer MP100, MP200 Series Differential Pressure Meters FM Series Dwyer Handheld Digital Manometer Series Dwyer Wet/Wet Handheld Digital Manometer AMI300 Series Multifunctional IAQ Analyzer Magenepull XP1000 SERIES Cable Retrieval System TOOLS & TEST EQUIPMENT Signal Generators ASG Kele Handheld Portable Analog Signal Generator CVC Kele Handheld Portable Digital Display Signal Generator PCA3 Series p kele.com

3 KELE HANDHELD PORTABLE ANALOG SIGNAL GENERATOR ASG The Kele ASG is a handheld, battery- or plug-in power supply powered, pocket size analog signal generator. It generates a 0-10 VDC signal in increments of 1 volt or a 0-20 ma signal in increments of 2 ma. LED bar graph visually indicates analog signal level. The ASG can also continuously ramp to userdefined minimum or maximum values with user-defined ramptime settings. Powered by 9V battery or plug-in power supply Pocket size with carrying case Bar graph LED for signal display 0-20 ma (2 ma increments) 0-10 VDC (1 VDC increments) Ramp function to minimum and maximum values Variable ramp function timing Low battery indication User-defined auto shutoff times for battery conservation Separate milliamp and voltage output jacks 6' (1.83m) leads with alligator clips Perfect for loop-powered circuits and externally powered circuits Supply Voltage 9V battery or 120 VAC plug-in power supply 30 hours Output Impedance Voltage 1000Ω minimum Current 300Ω maximum Output 0-20 ma (2 ma increments) 0-10 VDC (1 VDC increments) Accuracy at 72 F Current ±0.5% FS or ±0.1 ma Voltage ±0.5% FS or ±0.05 VDC Auto Shutoff Times 2-20 minute (2-minute increments) Ramping Time Intervals 2-20 second (2-second increments) Resolution Current 2 ma Voltage 1 VDC Operating Temperature 32 to 1 F (0 to 50 C) Accessories included 6' (1.83m) wire leads, carrying case RoHS 0.66 lb (0.29 kg) with accessories APPLICATION Troubleshooting transmitters, transducers, and actuators Calibrating transducers, digital displays, and other analog signal devices DIMENSIONS in (cm) ma source output ma two-wire transmitter output 4.7 (11.9) ASG with accessories 2.4 (6.1) ASG Programming buttons External power Voltage output 0.85 (2.2) ASG ASG-CABLE ma/vdc handheld portable analog signal generator with accessories Replacement cable for ASG/CVC WE MAKE IT EASY. kele.com USA 1393

4 KELE HANDHELD PORTABLE DIGITAL DISPLAY SIGNAL GENERATOR CVC The Kele CVC is a handheld, battery or plug-in power supply powered, pocket size digital signal generator. It generates a 0-10 VDC signal in increments of 1 volt or a 0-20 ma signal in increments of 1 ma. A digital display visually indicates analog signal level. The CVC can also continuously ramp to user-defined minimum or maximum values with user-defined ramp-time settings. Pocket size with carrying case Digital signal display 0-20 ma (2 ma increments) 0-10 VDC (1 VDC increments) Ramp function to minimum and maximum values Variable ramp function timing Low battery indication User-defined auto shutoff times for battery conservation Separate milliamp and voltage output jacks Perfect for loop-powered circuits and externally powered circuits Supply Voltage 9V battery or 120 VAC plug-in power supply 30 hours Outpuy Impedance Voltage 1000Ω minimum Current 300Ω maximum Output 0-20 ma (1 ma increments) 0-10 VDC (1 VDC increments) Accuracy at 72 F Current ±0.5% FS ±0.1 ma ± 0.05 VDC Voltage ±0.5% FS or ±0.05 VDC Ramping Time Intervals 2-20 second (1-second increments) Resolution Current 1 ma Voltage 1 VDC Operating Temperature 32 to 1 F (0 to 50 C) Display 0.5" (1.3 cm) blue backlit LCD Low Battery Alerts below 7 VDC Auto Shutoff Times 1-20 minute (1-minute increments) Additional Specifications 6' (1.83m) wire leads, carrying case RoHS 0.92 lb (0.42 kg) with accessories APPLICATION Troubleshooting transmitters, transducers, and actuators Calibrating transducers, digital displays, and other analog signal devices DIMENSIONS in (cm) 5.5 (14.0) Front View CVC with accessories 1.4 (3.6) Display backlight switch Programming Buttons Battery (9V) compartment in back Top View 2.5 (6.4) All connection jacks on top of unit CVC ASG-CABLE ma/vdc handheld portable digital display signal generator with accessories Replacement cable for ASG/CVC USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.

5 LASCAR DATA LOGGER EL-USB SERIES DATA LOGGER The Lascar USB Data Loggers measure and record a variety of parameters such as temperature, humidity, voltage, current and carbon monoxide. Simply insert any of these loggers into your computer's USB port, name it, choose your required samplinge rate and set high and low alarms. Logged data is displayed using Lascar's FREE configuration and analysis software. Compatible with Windows 2000, XP Vista 32-bit and Windows 7 64-bit Assign unique logger identity Set sample rate and alarm thresholds Choose delayed start time if required Download data in.txt format to be viewed as graph or exported to standard spreadsheet APPLICATION Food and pharmaceutical storage Temperature-controlled haulage Refrigerator or freezer monitoring HVAC monitoring Factory floors and warehousing Laboratory conditions Pressure monitoring Flow monitoring Level monitoring Power usage Gas detection ph level monitoring EL Series Supply Voltage EL-USB-RT LED Indication 3.6 Volt lithium battery (except EL-USB- RT) USB connection only (depending on sample rate, ambient temperature, and alarm LED use) Blinking for operation verification Model Type Measurement Range " dia. x 3.86" (2.59 x 9.8 cm) 2, 3, " dia. x 4.06" (2.64 x cm) 2-LCD, CO 0.90" dia. x 4.90" (2.28 x cm) RT 0.40" dia. x 3.03" (1.04 x 7.7 cm) 0. lb (0.1 kg) RoHS Reading Capacity EL-USB-1 Temperature -31 to 176 F (-35 to 80 C) 16,000 Samples EL-USB-2 EL-USB-2-LCD EL-USB-RT Temperature & humidity Temperature & humidity, 2-1/2 digit LCD display Real-time temperature and humidity -31 to 176 F (-35 to 80 C) 0 to 100% RH -31 to 176 F (-35 to 80 C) 0 to 100% RH -4 to 158 F (-20 to 70 C) 0 to 100% RH 16,000 Samples/ channel 16,000 Samples/ channel Sample Intervals 10 seconds to 12 hours 10 seconds to 12 hours 10 seconds to 12 hours 7 Days 1 second only Additional Features NEMA 4X, IP67 cap installed NEMA 4X, IP67 cap installed LCD status, latest log, no download required , sound and LED alarm, 7 days of data on HD EL-USB-3 Voltage input 0 to 30 VDC 32,000 Samples 1 second to 12 hours Alligator clip leads EL-USB-4 Current input 4 to 20 ma 32,000 Samples 1 second to 12 hours Alligator clip leads EL-USB-CO Carbon monoxide 0 to 1000 ppm 32,000 Samples 10 seconds to 5 minutes Audible alarm in cap BAT 3V6 1/2AA RELATED PRODUCTS 3.6 Volt lithium battery WE MAKE IT EASY. kele.com USA 1395

6 DIGITAL THERMOMETER TK100 SERIES The E Instruments TK100 Digitial Thermometer is a single-channel, hand-held digital thermometer with large 2-line display. The TK102 has dual channels for measuring differential temperature. A variety of probes are available for different temperature measurement applications. Selection of units for F or C display Hold function minimum and maximum values Adjustable automatic shut-off to save battery life Adjustable display for easy reading in varying light conditions Adjustable alarms for instant notification of extremes Delta T (TK102) for easy differential measurement TK100 Shown with Probe (sold seperately) Supply Voltage 9V alkaline 6LR61 battery included 9 hours approximately Measuring Element Thermocouple type K, J or T class 1 Accuracy Type K Max either ±1.1 F or ±0.4% of reading Type J Max either ±0.8 F or ±0.4% of reading Type T Max either ±0.5 F or ±0.4% of reading Auto Shutoff Times Adjustable 0 to 120 minutes Display 2 line LCD, 1.4"H x 2"W (3.5 x 5.0 cm) Measurement Range Units F or C Type K -328 to 2372 F (-200 to 1300 C) Type J -158 to 1382 F (-105 to 750 C) Type T -328 to 752 F (-200 to 400 C) Resolution 0.1 F Operating Temperature 0 to1 F (-18 to 50 C) Storage Temperature -4 to 176 F (-20 to 80 C) Cable Type Retractable, 18" to 95" (46 to 241 cm) Housing Type Shock-proof ABS, IP54 standard Keypad 5 metal-coated keys Housing 5.8"H x 2.8"W x 1.4"D (14.8 x 7.1 x 3.5 cm) Case 18"H x 8.5"W x 3"D Language (46 x x 7.6 cm) English, French CE 1.1 lb (0.5 kg) TK100 Digital thermometer, 1-channel (Probe sold seperately) TK102 Digital thermometer, 2-channel (Probe sold seperately) FK-PFA-05-MM Thermocouple K Wire Probe.5M SKA150 Thermocouple K Ambient Probe with Handle SKC150 Thermocouple K contact probe SKG150 Thermocouple K general use probe 150mm SKV150 Thermocouple K velcro pipe probe 1.5m cable SKP150 Thermocouple K pricking probe USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.

7 DIGITAL HANDHELD THERMOMETER TM99A This economical, all-purpose solid-state thermometer is perfect for field/factory use in a variety of applications in which a fast response is required. Fahrenheit/Centigrade switch selectable Large, illuminated LCD display Certified calibration Membrane keypad operation Supply Voltage (2) 1.5 V Alkaline AAA Battery included 1800 hours Accuracy ±0.3 F (±0.20 C) or ±0.5% of reading Display Units Four digits, one decimal point, F or C Probe 10K thermistor, detachable (#1075) Range -40 to 302 F (-40 to 151 C) Resolution 0.1 F or C Operating Humidity Maximum 90% Non-condensing TM99A Operating Temperature 0 to 130 F max (-18 to 54 F) Display Backlit 0.5" LCD 7.5"H x 4.0"W x 2.5"D (19.05 x x 6.35 cm) closed case Auto Shutoff Times 5 minutes CE, RoHS, Certificate of Calibration 0.63 lb (0.29 kg) Probe Instrument 5 year TM99A Digital probe thermometer The DT-1K Digital Thermometer Probe is easy to operate. Touch probe to the object and press the ON button to measure the temperature. Multi-usage High accuracy Pen-style digital Battery included DIGITAL TEMPERATURE PROBE DT-1K DT-1K Supply Voltage (1) 1.5V Button cell AG13 battery included Accuracy ±2 F or ±1 C Measurement Range -58 to 572 F (-50 to 300 C) Resolution 0.1 F or C Display Units F or C Low Battery Yes Memory Auto Shutoff Times Probe Length Probe Material Last measured temperature 45 minutes 6" pointed Stainless steel CE 0.10 lb (0.05 kg) DT-1K Digital thermometer probe WE MAKE IT EASY. kele.com USA 1397

8 VAISALA RH / TEMPERATURE METER HM40A1AB This handheld, pocket-sized Vaisala Model HM40A1AB RH/ Temperature Meter provides a fast and convenient way to accurately spot-check relative humidity and temperature. Measurement of humidity, temperature, dewpoint, wet bulb and enthalpy Large graphical display Multiple languages 2 x AA 1.5 Volt Battery Belt clip Supply Voltage 2 x AA Alkaline 1.5 Volt Battery Sensor Response Time 17 seconds Sensor Type Humidity HUMICAP 180R Temperature PT 1000 RTD Humidity Accuracy ±1.5% (0% to 90% RH) ±2.5% (90% to 100% RH) Humidity Range 0% to 100% RH HM40A1AB Temperature Accuracy ± 0.36 F ( ± 0. C) Temperature Range 14 to 140 F (-10 to 60 C) Display LCD 9.4"L x 2.8"W x 1.7"D (23.8 x 7.2 x 4.4 cm) CE, NIST Traceable certificate included 0.6 lb (0.3 kg) HM40A1AB RH / Temperature meter with F/C reading EXTECH VIDEO BORESCOPE BR200 The Extech BR200 Video Borescope Inspection Camera is ideal for inspecting hard to reach spaces. Battery-powered, light weight, and able to light up dark places. This easy-touse tool can capture images, date/time stamp them, and download to a PC. Captured video with date/time stamp is played back on a monitor via wireless/ video input jack connection Transfer Video and images to your PC via the microsd card (with included SD adaptor) or USB cable (included) and viewed using Windows Media Player NTSC or PAL operation with menus in 10 languages: English, Chinese, German, French, Spanish, Portuguese, Italian, Japanese, Dutch, and Russian Mini water-proof (IP67) camera for high resolution viewing Two bright LED lamps with dimmer to illuminate viewed object Glare-free, close-up field of view 39" (1m) flexible gooseneck retains configured shape BR200 Model Description BR200 Flexible video borescope with 39" cable 7.3" x 5.7" x 1.6" (18.6 x 14.5 x 4.1 cm) 3 lb (1.4 kg) BR200-EXT 38" Extension cable 38" (96.52 cm) x 0.5" (1.27 cm)ø 1 lb (0.5 kg) USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.

9 EXTECH HANDHELD INFRARED THERMOMETER The Extech Model makes non-contact measurements of surface temperatures that are difficult or dangerous to reach. It features laser sighting, has an accuracy of 2% and is powered by a 9V battery. Single-point laser sighting Maximum temperature display Backlit graphic display Carrying case Supply Voltage 9 V Alkaline Battery Accuracy ±2% + 2 <932 F (500 C) ±2.5% + 5 >932 F (500 C) Distance To Spot Ratio 16:1 Emissivity 0.1 to 1.00 adjustable Range -58 to 1400 F (-50 to 760 C) Operating Temperature 32-1 F (0-50 C) 3.9"H x 2.2"W x 9"D (10 x 5.6 x 23 cm) CE 0.63 lb (0.29 kg) Laser-sighted handheld infrared thermometer The Extech Infrared Camera is for identifying hot or cold spots in rooms, panels, and on equipment. Using high accuracy Infared Technology, the is lightweight and compact, perfect for inspecting thermally sensitive targets. High accuracy of 2% and thermal sensitivity of 0.1 C -4 F to 482 F (-20 C to 250 C) measuring range Focus-free lenses for convenient viewing 2.8 (71mm) high resolution color LCD 10, 000 pixels >5 hour continuous operation on a single charge for uninterrupted inspections Complete with 2G minisd Card, Li-Ion rechargeable battery with V AC adaptor/charger with EU, UK, US and Australian plugs, FLIR Tool reporting software with mini USB cable, built-in manual lens shutter, and hard case Type IP43 dust & splash proof housing : 2 years on camera, 5 years on battery, 10 years on detector INFRARED CAMERA DIMENSIONS WEIGHT Extech i5 thermal imaging camera 8.8" x 3.1" x 3.3" (.3 x 7.9 x 8.3 cm) 0.81 lb (0.54 kg) WE MAKE IT EASY. kele.com USA 1399

10 AMPHENOL ADVANCE SYSTEMS HANDHELD CO2 / TEMPERATURE METER 7001 The Amphenol Advanced Sensors Model 7001 uses dual-beam infrared technology for accuracy and stability. Convienent battery operation offers mobility and temperature is displayed in F or C with AC Adapter Supply Voltage Output (via RJ-45 jack) Accuracy CO2 Temperature Calibration Repeatability Pressure Dependence 120V/6V adapter (included) or Four AA alkaline batteries (not included) Up to 80 hours 0-4VDC = 100 Ωmin ppm 0-4VDC = 32 to 104 F (0 to 40 C) ±50 ppm or 5% of reading ±2 F (±1 C) every 12 months ±20 ppm 0.13% per mm Hg, user input for elevation correction Response Time Operating Temperature Display Range CO2 Temperature <60 sec CO2 32 to 1 F ( 0 to 50 C), 0% to 95% RH Four-digit 1/2" LCD, CO2, and temperature From 0-10,000 ppm 32 to 1 F (0 to 50 C) 6.5"H x 3.0"W x 1.5"D (16.5 x 7.6 x 3.8 cm) 2.1 lb (0.95 kg) 7001 Handheld digital CO2/Temperature meter AMPHENOL ADVANCE SYSTEMS HANDHELD DIGITAL HYGROMETER BLD7800 The Amphenol Advanced Sensors BLD Psyclone is an inexpensive, accurate hand held digital hygrometer that displays %RH, dry bulb, and dew point temperature (in F and C). Low cost handheld meter Displays RH, drybulb and dewpoint temperatures Carrying case Supply Voltage (2) 1.5V Alkaline AA Battery approximately Accuracy ±2% 10-90% 77 F (25 C) Measurement Range -4 to 185 F (20 to 85 C) Humidity Range 1.0 to 99.0% non condensing Operating Temperature 32 to 1 F (0 to 50 C) 6.5"H x 2.5"W x 1.2"D (16.5 x 6.5 x 3.0 cm) CE, RoHS 0.44 lb (0.2 Kg) 2 years limited BLD7800 with Carrying Case BLD7800 BLDCERT Handheld digital hygrometer and temperature meter with case Handheld digital hygrometer and temperature meter with case and NIST certificate USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.

11 ENVIRONMENTAL IAQ METERS AQ100, AQ200 SERIES The E Instruments AQ100 Series Environmental Meter is an economical, fixed probe, hand-held air quality sensor for ambient temperature and CO2 measurement. It uses NDIR (non dispersive infrared) technology and comes with a soft carrying case. The AQ200 Series has interchangeable measurement modules, as opposed to a fixed probe, and is available in popular "kits" with temperature/co2/humidity or temperature/co2/humidity/co, for example. The AQ200 Series also comes standard with a voltage/current module (0-10V, 4-20 ma), two Pt100 channels, and a PC output with software. Selection of units Minimum/maximum and hold functions Automatic shutoff Adjustable backlight Calibration certificate available with some models AQ100S AQ200 Supply Voltage AQ100 AQ200 Accuracy AQ100 CO2 Temperature Range AQ100 CO2 Temperature Resolution AQ100 CO2 1 ppm Temperature 0.1 F or C Sensor Type AQ100 (1) 9V alkaline 6LR61 included (4) 1.5 V alkaline AA included 9 hours continuous ±3% of reading or ±50 ppm ±0.4% of reading or ±0.3 F 0 to 5000 ppm -4 to 176 F (-20 to 80 C) CO2 Non-dispersive infrared (NDIR) Temperature Pt100 Class A AQ200 CO2 Non-dispersive infrared (NDIR) Temperature Pt100 Class A (AIQ probe) semiconductor (climatic probe) CO Electrochemical Humidity Capacitive Operating Temperature 0 to 1 F (-17.7 to 50 C) Storage Temperature Connection Type AQ100 AQ200 Keypads Housing Type Enclosure Rating AQ100 AQ200 Auto Shutoff Times Language AQ100 AQ200 AQ100 AQ200-4 to 176 F (-20 to 80 C) 18" (450 mm) to 8 (2.4m), retractable Top: 2 secured mini-din for SMARTplus probes Side: 1 USB port 5 keys, metal coated, (AQ200 Joystick) Shock-proof ABS Environmental IP54 Body only: 5.8"H x 2.8"W x 1.4"D (14.8 x 7.1 x 3.5 cm) Body only: 6.4"H x 3.2"W x 2.3"D (16.2 x 8.1 x 5.7 cm) Adjustable 0 to 120 minutes English, French English, French, Dutch, German, Italian, Spanish, Portuguese, Swedish, Norwegian, Finnish, Danish CE 0.42 lb (0.19 kg) 0.75 lb (0.34 kg) AQ100S AQ200 AQ200CO AQ200P Air quality tester, CO2 & temperature, fixed probe Air quality tester kit CO2, temperature Air quality tester kit CO, CO2, temperature, humidity Air quality tester kit CO2, temperature, humidity WE MAKE IT EASY. kele.com USA 1401

12 COMBUSTION ANALYZER BTU1100 SERIES The E Instruments BTU combustion gas analyzer is the latest and most innovative all-in-one tool for complete boiler and burners set-ups, servicing and maintenance. The BTU measures O2, CO, CO2, efficiency, excess air, draft, pressure, and temperature. It has a large blue backlit digital display with zoom, heavy duty metal connections, a 10' dual hose with 12" probe, data memory, PC capabilities, and an integral non-thermal impact printer. Also included are a rechargeable battery and AC plug, vinyl case, calibration certificate, water trap and an extra roll of printer paper. The BTU has all those features plus smoke pump, smoke filter papers and comparison chart. CO sensor with NOx filter Built-in non-thermal printer Draft and differential pressure meter Two-channel thermometer Ambient CO monitor One-button operation Rechargeable battery and AC charger BTU1100 series Zoom function Immediate response time External condensation trap 600 test internal memory and PC capability Field replaceable sensors Supply Voltage Rechargeable battery with AC charger (8-9 hours single charge) Accuracy O2 ±0.2% of volume CO ±10 ppm (400ppm), ±5% range (400 to 2000ppm), ±10 range (>2000ppm) Tair 1 F Tgas ±2 F Pressure/Draft ±0.008"WC (up to 0.16" WC), ±5% (>0.16"WC) Range O2 0-25% CO ppm CO % Tair -10 to 212 F (-23 to 100 C) Tgas -10 to 1830 F (-23 to 1000 C) Tdifferential -10 to 1830 F (-23 to 1000 C) Pressure/Draft ±80" WC Excess Air 0-850% Efficiency 0-100% Resolution O2 0.1% CO 1ppm CO2 0.1% Tair 0.1 F Tgas 0.1 F Tdifferential 0.1 F Pressure/Draft 0.001" WC Excess Air 0.01 Efficiency 0.1 Sensor Type O2, CO electrochemical CO2, Tdifferential calculated Excess air, Efficiency calculated Tair PT100 Tgas TcK Pressure/Draft semi-conductor Operating temperature 23 to 104 F (-5 to 40 C) 12"H x 18"W x 10"D (30 x 46 x 25 cm) Type Fuels: Natural gas, #2 oil, #4 oil, heavy oil, propane, butane, biofuel 5%, coal, diesel, wood/pellets Unit: 2.4 lb (1.1 kg), Kit: 10 lb (4.5 kg) 2 years BTU BTU Combustion analyzer kit (O2, CO, CO2, draft, probes, case, printer) Combustion analyzer kit, includes smoke pump kit USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.

13 HAND-HELD COMBUSTION ANALYZER KITS PCA3 SERIES The Bacharach PCA3 Series Hand-Held Combustion Analyzer Kits are designed for on-demand sampling to determine combustion efficiency, excess air, stack gas O2 and CO levels, stack temperature, draft, and differential pressure. The analyzer can measure up to four gases simultaneously with standard O2, CO, and optional NO, NO2, or SO2. The units perform combustion calculations for ten preprogrammed fuels. The large backlit graphic display shows eight different measurements and calculated values. The kits include factory calibrated and installed sensors, probe and hose assembly, protection boot, USB cable, software, printer, batteries, hard carrying case, and manual. O2 and CO measurement standard Field replaceable pre-calibrated sensors Ten preprogrammed fuels Calculates combustion efficiency Backlit graphic LCD with zoom capability Datalogging stores 500 combustion test records Auto zero function PCPA3-275-KIT Supply Voltage Accuracy Ambient Air Four Alkaline AA batteries, optional VAC adapter ±2 F, (32 to 212 F), ±1 C, (0 to 100 C) Stack Temperatures ±4 F, (32 to 255 F), ±2 C, (0 to 124 C); ±8 F, (482 to 752 F), ±4 C, (250 to 400 C) O2 ±0.3% on flue gas CO, SO2 ±5% of reading or ±10 ppm between ppm NO ±5% of reading or ±5 ppm between ppm NO2 ±5% of reading or ±5 ppm between ppm Pressure / Draft ±2% of reading or ±0.02" W.C. Fuel Types Natural gas, oil #2, oil #4, oil #6, propane, coal, wood, kerosene, bagasse, and digester gas Measurement Range Ambient Air Temperature Ambient air temp -4 to 999 F (-20 to 537 C) Stack Temperature -4 to 2192 F (-20 to 1200 C) O2 0% to 20.9% CO ppm NO ppm NO ppm SO ppm Pressure / Draft -72" to 72" W. C. Display Graphic LCD alpha-numeric with zoom function Warm Up Time 60 seconds Calculated Range Combustion Efficiency 0.1% to 100% Excess Air 1.0% to 250% CO2 0 to fuel dependent maximum NOx (NO + NO2) ppm Memory 500 combustion test records plus 500 complete logged combustion test records 9.0"H x 3.0"W x 2.5"D (.9 x 7.6 x 6.3 cm) 2 lb (0.91 kg) WE MAKE IT EASY. kele.com USA 1403

14 HAND-HELD COMBUSTION ANALYZER KITS PCA3 SERIES FUNCTIONS F1/F2/F3 - Soft menu buttons, functions defined by labels appearing above them on LCD ENT: Selects a highlighted menu item or confirms data entry RUN/HOLD: Starts and stops combustion efficiency test USB - Connector Arrrow buttons - - Moves cursor up the display, or increments an alpha-numeric value Pressing during the 5 second turn-off period will keep the analyzer turned ON ESC: Displays previous menu or screen I/O: Turns unit ON/OFF Depress for 1-2 seconds Backlit ON/OFF T-STACK - Probe s stack gas thermocouple connector POWER - AC adapter connection Delta P reference pressure hose fitting T-STACK T-AIR - Moves cursor up the display, or increments an alpha-numeric value - Moves cursor left or moves to top of menu list - Moves cursor right or moves to bottom of menu list T-AIR - Ambient air T/C connector GAS - Probe s gas hose connector Delta P draft hose fitting PCA3-5-KIT PCA3-265-KIT PCA3-275-KIT Handheld combustion analyzer kit with O2 and CO Handheld combustion analyzer kit with O2, CO, NO, and NO2 Handheld combustion analyzer kit with O2, CO, NO, and SO2 ACCESSORIES AC power adapter, VAC, 50/60 Hz USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.

15 EXTECH CARBON MONOXIDE METER CO10 The Extech CO10 Carbon Monoxide Meter is for performing localized safety checks for CO. Offering fast response time and portability, it is a perfect tool for targeting troubled ventilation areas in parking garages, motor pools, and storage facilities. Ergonomic pocket size housing One button operation Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm Audible alarm starting at 35 ppm with continuous beeping when above 200 ppm Backlight for low light conditions Max Hold and Data Hold buttons Auto power off Complete with 9V battery, protective rubber holster and carrying case CO10 Model Description CO10 Carbon monoxide meter 6.3 x 2.2 x 1.57 (16.0 x 5.6 x 4.0 cm) 2 lb (0.9 kg) The Extech HD400 Heavy Duty Light Meter allows the user to take indoor and outdoor light level readings. It is ideal to make sure lighting requirements are being met, and to assist with fine tuning lighting control systems for optimum performance and efficiency. Wide range to 40,000Fc or 400,000 Lux Cosine and color corrected measurements Utilizes precision silicon photo diode and spectral response filter Peak mode (10µS) captures highest reading Relative mode indicates change in light levels Min/Max and Data Hold Large backlit LCD display with 40-segment bar graph Heavy Duty rugged double molded housing Built-in USB port Includes light sensor with 3' (0.91m) cable and protective cover, Windows compatible software with USB cable, hard carrying case, and 9V battery EXTECH LIGHT METER HD400 HD400 Model Description HD400 Heavy duty light meter 6.7 x 3.1 x 1.6 (17.0 x 8.0 x 4.0 cm) 2 lb (0.9 kg) WE MAKE IT EASY. kele.com USA 1405

16 PORTABLE SOLARIMETERS SL100, SL200 SERIES The E Instruments SL100 and SL200 Solar Meters are portable, easy to use hand-held solar energy meters that are perfect for verification of solar panel orientation or for spot checking solar energy where photovoltaic cells are being used to generate electricity. These tools measure instantaneous solar irradiance and irradiation over time, with the ability to average and record minimum/maximum values.the Model SL100 can measure continuous exposure for up to 3 days, the Model SL200 has memory to record and store data for up to 31 days, software for PC interface and calibration certificate. Both include an IP66 remote solar cell with 4.1 ft. (1.25m) cable and carrying case. Instantaneous, average, minimum/ maximum values and hold function Large adjustable graphic display for easy reading in varying light conditions Weatherproof (IP66) remote solar cell with plug-in cable Calibration Certificate - SL200 model USB port for trend data transfer to PC - SL 200 model SL100, SL200 Series Supply Voltage 3 LR3 Alkaline AAA batteries (included) Battery Life 72 hours minimum Accuracy 5% of measurement Measurement Range Irradiance 1 to 1300 W/m 2 (instantaneous) Irradiation 1 Wh/m2 to 500 kwh/m 2 (cumulative) Measurement Frequency 2 measurements per second Calculation Frequency 1 calculation per minute (W/m 2 ) Measurement Capacity Results are saved when unit is powered off SL100 3 days of cumulative data (Wh/m 2 ) SL days of cumulative data (Wh/m 2 ), 44,640 data points Operating Temperature Instrument 14 to 1 F (-10 to 50 C) Solar Cell - to 140 F (-30 to 60 C) Cable Length 4.1ft (1.25m), plug-in at instrument Housing Type Shock-proof ABS, IP40-SC200 Instrument 4.7"H x 2.3"W x 1.3"D (12 x 5.8 x 3.3 cm) Solar Cell 1.2" diameter x 1.3"H (3.0 x 3.2 cm) Solar Cell Specifications Sensor Photovoltaic Polycrystalline silicon Spectral Response 400 to 1100 nm Nominal Sensitivity 100 mv for 1000 W/m 2 Response in Cosine Corrected up to 80 Temp Coefficient +0.1%/ C Effective Area 1 cm2 Humidity 100% RH (IP66 housing) UV Performance Excellent (translucent PMMA filter) CE, RoHS Meter with case 0.5 lb (0.23 kg) Solar cell 0.13 lb (0.06 kg) SL100 SL200 Portable solarimeter, up to 3 days continuous measurement Portable solarimeter, up to 31 days continuous measurement, PC interface USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.

17 THERMO-HYGROMETERS HD100 SERIES The E Instruments HD100S Thermo-Hygrometer is a portable digital thermo-hygrometer with integral probe for measurement of relative humidity, dew point, and ambient temperature. The HD150S comes with an IP65 protective housing and a white case, making it acceptable for the food industry. Selection of units for both temperature and humidity/ dew point Hold function and minimum/maximum values Adjustable automatic shut-off for maximum battery life Large adjustable backlit display for easy reading in varying light conditions HD100S Supply Voltage 9V alkaline 6LR61 included 9 hours approximately Accuracy RH ±1.8% RH from 59 to 77 F (15 C to 25 C) drift <1% RH/year Dew point greater of ±0.6 F or ±0.8% of reading Ambient Temperature greater of ±0.3 F or ±0.4% of reading Auto Shutoff Times Adjustable 0 to 120 minutes Display 2 line LCD, 1.4 H x 2 W (3.5 x 5.0 cm) Measurement Range RH 5% to 95% RH Dew Point -40 to 158 F (-40 to 70 C) Ambient Temperature -40 to 158 F (-40 to 70 C) Resolution RH 0.1% RH Dew Point 0.1 F Ambient Temperature 0.1 F Operating Temperature Instrument 0 to 1 F (-18 to 50 C) Probe -4 to 158 F (-20 to 70 C) Cable Type Retractable, 18 to 95 (46 to 241 cm) Keypads 5 metal-coated keys Housing Type Shock-proof ABS, IP54 standard (IP65 model HD150S) Housing 5.8"H x 2.8"W x 1.4"D (14.8 x 7.1 x 3.5 cm) Case 18"H x 8.5"W x 3"D Language Measuring Element (46 x x 7.6 cm) English, French Capacitive (CMOS) sensor Measuring units RH % Dew point F or C Ambient temperature F or C CE 0.42 lb (0.19 kg) HD100S HD150S Portable digital thermo-hygrometer Portable digital thermo-hygrometer in white IP65 housing WE MAKE IT EASY. kele.com USA 1407

18 THERMO-ANEMOMETER LV100, VT100, VT200 SERIES The E Instruments LV100 Series Portable Thermo- Anemometers are available with either a 0.5" (14 mm), 2.7" (70 mm) or 4" (100 mm) fixed vane probe for measurement of air flow velocity and a thermistor for ambient temperature. The VT100S Series has a 0.3" (8 mm) diameter, 12" (305 mm) long stainless steel hot-wire probe for measurement of air flow and ambient temperature. The VT200 Series has interchangeable temperature and air flow velocity measurement modules for maximum flexibility; it is the ultimate meter for air flow/temperature needs. All are supplied with calibration certificate and soft carrying case. Selection of units Hold function with min/max values Automatic average Automatic shutoff Adjustable backlit digital display Supply Voltage LV100, VT100 LV200 LV100, VT100 LV200 Sensor Type LV100 Vane Probes (1) 9V alkaline 6LR61included (4) 1.5V alkaline LR6 included Life Up to 9 hours continuous Life Up to 9 hours continuous 0.5" (1.4 cm), 2.8" (7.0 cm) 4.0" (10.0 cm), hall effect Pt100 class A Temperature VT100 Hotwire, Air Velocity NTC Thermistor Temperature Pt100 Class 1/3 DIN VT200 Hotwire, Air Velocity NTC Thermistor Temperature Pt100 Class 1/3 DIN 70 mm, 100 mm Vane Hall effect 14 mm Vane Proximity Thermocouple Type K, J and T Class 1 PT100 Smart-plus Pt100 Class 1/3 DIN Operating Temperature 0 to 1 F (-17.7 to 50 C) Storage Temperature -4 to 176 F (-20 to 80 C) Cable Type LV100 18" (450 mm) to 8' (2.4 m), retractable VT ' (2 m) Connection Type VT 200 ONLY Instrument Connections Top 2 secured mini-din for SMART-plus probes Side 1 USB port for EIG cable only, 1 power supply plug Module Connections Thermocouple 4 inputs for compensated miniature plug thermocouple Current / Voltage Display LV100, VT100 VT200 Range LV101 VT100, VT200 Keypads Housing Type Enclosure Rating LV100, VT100 VT200 Auto Shutoff Times Language LV100, VT100 VT200 LV100, VT100 VT200 Two stereo jacks 2 line LCD, 1.4"H x 2"W (3.5 x 5.0 cm) Color graphic, 320 x 240 pixels, 2.8"H x 2.0"W (5.4 x 5.0 cm), 6 different measurements (4 simultaneously) 157 to 591 FPM (0.8 to 3 m/s) 610 to 7874 FPM (3.1 to 44 m/s) 29.5 to 591 FPM (0.15 to 3 m/s) 610 to 5906 FPM (3.1 to 30 m/s) 5 keys, metal coated (optional joystick VT200) Shock-proof ABS IP54 Body only: 5.8"H x 2.7"W x 1.4"D (14.8 x 7.1 x 3.5 cm) Body only: 6.4"H x 3.2"W x 2.3"D (16.2 x 8.1 x 5.7 cm) Adjustable 0 to 120 minutes English, French English, French, Dutch, German, Italian, Spanish, Portuguese, Swedish, Norwegian, Finnish, Danish CE 0.42 lb (0.19 kg) 0.75 lb (0.34 kg) LV101S LV107S LV110S LV120S LV130S VT100S VT200 VT200F VT200H VT200L VT200P VT200TF VT200TP Thermo-Anemometer 0.5 in. vane, fixed Thermo-Anemometer 2.7 in. vane, fixed Thermo-Anemometer 4.0 in. vane, fixed Thermo-Anemometer 4.0 in. vane, integral Thermo-Anemometer 4.0 in. vane, integral, rotating Thermo-Anemometer 12 in. Hotwire, fixed Thermo-Anemometer base unit, no probes Thermo-Anemometer includes Hotwire probe Thermo-Anemometer includes 2.7 in. vane probe Thermo-Anemometer includes 4.0 in. vane probe Thermo-Anemometer includes 0.5 in vane probe Thermo-Anemometer includes gooseneck hotwire probe Thermo-Anemometer includes telescopic 0.5 in. vane probe USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.

19 HAND-HELD TACHOMETER CT100 SERIES The E Instruments CT100OS Hand-Held Tachometer is a compact, hand-held tachometer with optical probe and reflective tape, for measuring revolutions per minute (RPM) on motor shafts or any rotating device. The CT100CS adds a contact tip for direct physical rotation measurement. Unit selection and English or French language selection Hold function and minimum, maximum values Optical or contact sensor to meet most applications CT100 Probes with contact tip and with optical tip Supply Voltage 9V alkaline 6LR61 included Up to 25 hours continuous Accuracy Optical ± (0.3% rdg ± 1 RPM) Contact ± (1% rdg ± 1 RPM) Measuring Elements Optical Phototransistor Contact ETC type adapter Measurement Range Optical 60-60,000 RPM (units Tr/min, RPM) Contact 30-20,000 RPM (units m/min, ft/min, 1n/min) Resolution Optical 1 RPM Contact 1 RPM Operating Temperature 32 to 1 F (0 to 50 C) Cable Type Display Keypads Housing Type Auto Shutoff Times Language Retractable, 18" to 95" Retractable, 18" to 95" (46 to 241 cm) 2 lines, 12 characters 0.5"H x 1.5"W (1.3 x 3.8 cm) 5 elastomer keys Shock-proof ABS 5.7"H x 3"W x 1.3"D (14.5 x 7.6 x 3.3 cm) Adjustable 0 to 120 minutes English, French CE 0.42 lb (0.19 kg) CT100CS CT100OS Portable tachometer with optical and contact sensor Portable tachometer with optical sensor WE MAKE IT EASY. kele.com USA 1409

20 DIFFERENTIAL PRESSURE METERS MP100, MP200 SERIES The E Instruments MP100 Series Differential Pressure Meter portable digital manometers have a built-in pressure sensor and come with tubing and a carrying case. The MP200 Series thermo-anemo-manometer comes in different pressure range models and has interchangeable measurement modules for temperature (thermo), air velocity (anemo), and air flow with pitot tube. The MP200 Series also includes one Thermocouple K/J/T channel, calibration certificate, and a PC output. Transport case included for protection Selection of units Automatic calibration Hold and min/max functions Adjustable automatic shutoff Adjustable backlit display MP105 MP200 Supply Voltage MP105, MP120 (1) 9V alkaline 6LR61 included MP200 (4) 1.5V alkaline LR6 included MP105, MP120 Up to 9 hours continuous MP200 Up to 9 hours continuous Pressure Piezoresistive Thermocouple Type K, J, and T Class 1 Current / Voltage 2 stereo jacks for V, ma Connector MP105 Pressure 0.18" (4.6mm) nickel-plated threads MP120 Pressure 0.24" (6.2mm) nickel-plated threads MP200 Pressure 0.24" (6.2mm) nickelplated barbs and 0.18" (4.6mm) nickel-plated barbs, and 1 input for compensated miniature plug thermocouple. Display MP105, MP120 2 line LCD, 1.4"H x 2"W (3.5 x 5.0 cm) MP200 Color display, 128 x 128 pixels 2.2"H x 2.0"W (5.4 x 5.0 cm) Keypads 5 keys, metal coated,(mp200 Joystick) Housing Type Shock-proof ABS Enclosure Rating IP54 Auto Shutoff Times Adjustable 0 to 120 minutes MP105, MP120 Body only: 6.1"H x 2.7"W x 1.4"D (15.6 x 7.1 x 3.5 cm) MP200 Body only: 6.6"H x 3.2"W x 2.3"D (16.9 x 8.1 x 5.7 cm) Operating Temperature 0 to 1 F (-17.8 to 50 C) Language MP105, MP120 English, French MP200 English, French, Dutch, German, Italian, Spanish, Portuguese, Swedish, Norwegian, Finnish, Danish CE 0.42 lb (0.19 kg) MP105 MP120 MP200G MP200H MP200HP MP200M MP200P Differential pressure micro-manometer -200 to 200 in. H2O (±0.5% accuracy) Differential pressure micro-manometer -4 to 4 in. H2O (±0.5% accuracy) Differential pressure micro-manometer -40 to 40 in. H2O (±0.2% accuracy) Differential pressure micro-manometer -200 to 200 in. H2O (±0.3% accuracy) Differential pressure micro-manometer -29 to 29 in. H2O (±0.3% accuracy) Differential pressure micro-manometer -10 to 10 in. H2O (±0.2% accuracy) Differential pressure micro-manometer -2 to 2 in. H2O (±0.2% accuracy) USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.

21 DWYER HANDHELD DIGITAL MANOMETER 475-FM SERIES The Dwyer 475-FM Series Mark III handheld digital manometer is ideal for field-calibrating, monitoring, or troubleshooting HVAC systems, clean rooms, and a wide range of other low-pressure applications. This handy instrument measures positive, negative, or differential pressures of air and natural gases. The 475-FM Series is approved and intrinsically safe for hazardous locations, Class 1, Division 1, Groups A, B, C, D, and T4. Measures positive, negative or differential pressure Handheld and battery powered Intrinsically safe for hazardous locations FM-1 C FM APPROVED US AV Kit Device Type Supply Voltage Battery Accuracy Pressure Range FM Service of Air and some combustible gases 9V alkaline battery Life Up to 100 hours ±0.5% FS, 60 to 78 F (15.6 to 25.6 C); ±1.5% FS from 32 to 60 F (0 to 15.6 C) and 78 to 104 F (25.6 to 40 C) " W.C. ( kpa)/ 5 psig (35 kpa) maximum FM-AV " W.C. ( kpa)/5 psig (35 kpa) maximum FM-AV " W.C. ( kpa)/5 psig (35 kpa) maximum FM " W.C. ( kpa)/5 psig (35 kpa) maximum FM " W.C. ( kpa)/10 psig (69 kpa) maximum Operating Temperature 32 to 104 F (0 to 40 C) Connection Type Two barbed for use with 1/8" (3.18 mm) or 3/16" (4.76 mm) ID tubing Display 0.5" liquid crystal, 3-1/2 digits 6.6" x 2.8" x 0.9" (16.8 x 7.1 x 2.3 cm) Air Velocity Kit Air velocity kit includes the 475- FM Manometer, (2) A303 Static Pressure tips, (2) 9' lengths of 3/16" ID rubber tubing, (1) CF Pitot Tube, (1) A-397 Step Drill bit, A532 Air Velocity slide chart, Instructions, and a molded plastic Carrying Case, Air velocity kit includes the 475-FM manometer, (2) static pressure tips, (2) 9' lengths of 3/16" ID rubber tubing, (1) CF pitot tube, (1) A-397 step drill bit, air velocity slide chart, instructions, and a molded plastic carrying case FM, CE Unit 0.3 lb (0.14 kg) Kit 0.6 lb (0.27 kg) FM Handheld digital manometer, 0-10" W.C FM-AV Handheld digital manometer, 0-10" W.C. with air velocity kit FM Handheld digital manometer, 0-4" W.C FM Handheld digital manometer, 0-1" W.C FM-AV Handheld digital manometer, 0-1" W.C. with air velocity kit FM Handheld digital manometer, " W.C. WE MAKE IT EASY. kele.com USA 1411

22 DWYER WET/WET HANDHELD DIGITAL MANOMETER 490 SERIES The Dwyer 490 Series wet/wet digital manometers are versatile, handheld, and battery operated. Units are highly accurate (±0.5% FS) for positive or positive-differential pressure measurement,and they can tolerate most liquid media compatible with 316L stainless steel. There are seven common English and metric pressure units (psi, "H2O, "Hg, mm Hg, kpa, Bar, or mbar), so conversions are not necessary. Measures either positive or positive differential pressure High accuracy (±0.5% FS) Tolerant of most liquid media compatible with 316L stainless steel Seven English and metric pressure units (psi,"h2o, "Hg, mm Hg, kpa, Bar, or mbar) Two 1/8" female NPT connections 490 Device Type Service of compatible, noncombustible gases and liquids Supply Voltage 9V alkaline included Up to 100 hours Accuracy ±0.5% FS from 60 to 78 F (15.6 to 25.6 C) ±1.5% FS from 32 to 60 F (0 to 15.6 ), 78 to 104 F (25.6 to 40 C) Wetted Materials Type 316L stainless steel Pressure Range psid (0-103 kpa)/30 psig max (207 kpa) psid (0-207 kpa)/60 psig (413 kpa) maximum psid (0-345 kpa)/100 psig (689 kpa) maximum Operating Temperature 32 to 104 F (0 to 40 C) 9"H x 4.7"W x 0.9"D (27.9 x 11.9 x 2.3 cm) Connection Type Two 1/8" (3.18 mm) female NPT Display 0.42" (10.6 mm), 4-1/2 digit LCD CE 0.88 lbs (0.4 kg) Wet/Wet digital manometer, 0-15 psid Wet/Wet digital manometer, 0-30 psid Wet/Wet digital manometer, 0-50 psid A-402A Gray nylon carrying case USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.

23 MULTIFUNCTIONAL IAQ ANALYZER AMI300 SERIES The E Instuments AMI300 Series Multifunctional IAQ Analyzer is an all-in-one tool for measurement and verification of air quality including temperature and differential temperature, humidity, dewpoint, wet bulb, enthalpy, air pressure and air velocity, CO2, CO, current and voltage. Includes PC software and USB cable allowing full datalogging, trend reporting, and data management. Backlit digital color display Calibration certificate and transport case included Manometer probes for pressure, air velocity, and air flow (using pitot tubes or other sensing elements) Vane probes for direct air velocity and air flow Thermo-hygrometer probes for dew point, wet bulb and enthalpy AMI300 Air quality probes for CO2, CO, temperature, and humidity Tachometry probes with optical only or optical plus contact sensor Supply Voltage Measurement Range Sensor Type CO2 CO Temperature (4) 1.5V alkaline LR6 AA batteries included 9 hours aproximately Refer to AMI300 brochure Non-dispersive infrared (NDIR) Electrochemical Pt100 Class A (Semiconductive in Climatic module) Capacitive Piezoresistive NTC thermistor Hygrometry Air Pressure Hotwire, Air Velocity 70 mm, 100 mm Vane Hall effect 14 mm Vane Proximity Thermocouple Type K, J and T Class 1 Tachometry Optical sensor, ETC adapter for connect Operating Temperature 32 to 1 F (0 to 50 C) Cable Type 18" (450 mm) to 8 (2.4 m), retractable Connection Type Instrument Connections Top: 2 secured mini-din for AMI300 ETC FC300 FC900 HE100 HE14 HE70 HET14 HR110 HRI300 MDP10000 MDP2000M MDP2500 MDP500 MDP500M RTO SCO2T SCO2TH SCOT SVTH TOP Module Connections Thermocouple Pressure Current / Voltage Display Keypads Housing Type Enclosure Rating Auto Shutoff Times Language SMARTplus probes Side: 1 USB port for EIG cable only 1 power supply plug 4 inputs for compensated mini plug thermocouple Two 1/4" (6.2 mm) diameter Two stereo jacks Color graphic, 320 x 240 pixels, 2.8"H x 2.0"W, 6 different measurements (4 simultaneously) 5 keys, metal-coated, 1 joystick Shock-proof ABS IP54 Analyzer only: 6.8"H x 3.4"W x 2.2"D (17.2 x 8.5 x 5.7 cm) Adjustable 0 to 120 minutes English, French, Dutch, German, Italian, Spanish, Portuguese, Swedish, Norwegian, Finnish, Danish CE 0.84 lb (0.38 kg) Air quality analyzer, base unit, no probes, includes MDP500M pressure module Tachometry probe contact adapter, 30 to 20,000 RPM Hotwire probe for AMI300, 12" (30 cm) length, 5/16" (0.8 cm) diameter Hotwire gooseneck probe for AMI300, 36" (90 cm) length, 3/8" (1.0 cm) diameter Vane probe for AMI300, 4.0" (10.0 cm) vane diameter Vane probe for AMI300, 0.5" (1.4 cm) vane diameter Vane probe for AMI300, 2.7" (7.0 cm) vane diameter Vane probe for AMI300, telescopic, 0.5" (1.4 cm) vane diameter Hygrometry probe, plastic, 4.3" (11 cm) length, 1/2" (1.3 cm) diameter Hygrometry probe, stainless, 11.8" (30 cm) length, 1/2" (1.3 cm) diameter Pressure module -40 to 40" H2O Pressure module -29 to 29 psid Pressure module -10 to 10" H2O Pressure module -2 to 2" H2O Pressure module -200 to 200" H2O Tachometry probe optical tape, 3.3 ft (1m) tape IAQ probe for AMI300, CO2, temperature IAQ probe for AMI300, CO2, temperature, humidity IAQ probe for AMI300, CO, temperature IAQ probe for AMI300, telescopic, velocity, temperature, humidity Tachometry probe for AMI300, optical, 60 to 50,000 RPM, includes 3.3 ft (1m) tape WE MAKE IT EASY. kele.com USA 1413

24 CABLE RETRIEVAL SYSTEM MAGNEPULL XP1000 SERIES Magnepull is the most advanced cable retrieval system on the market today. Using powerful rare earth magnets, Magnepull works through drywall, insulation, and carpet to pull wire more quickly and easily than the old fish-tape method. Magnepull is designed for commercial or residential installation of HVAC and building automation cable, satellite TV, home theater, security, thermostat or telecom wire and makes a wiring project a one-man job. The XP bullet drop magnet with leader and drop chain comes with the XP1000-LC system. Other drop magnets such as the XP (without leader, for confined spaces), XP (with 8/32" threaded stud), and XP (1/2" diameter bullet for smaller wires, also has the 8/32" threads) are also available. The MS800-1 Magnespot is used to locate a reference marker through sheetrock, ceilings or floorings. Revolutionary time-saving tool Smooth rolling design prevents wall damage Easy to use in tight places XP1000-LC XP XP XP XP MS800 MS800-1 XP1000-LC-MS Magnepull cable retrieval system w/ Magnespot XP1000-LC Magnepull cable retrieval system w/o Magnespot XP Drop magnet with leader, 0.75 in. diameter XP Drop magnet with eye fitting, 0.75 in. diameter XP Drop magnet with threaded bullet, 0.75 in. diameter XP Drop magnet with leader, 0.50 in. diameter MS800 Magnespot reference point locator with marker MS800-1 Magnespot reference marker USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.

25 COMBUSTION WHAT IS COMBUSTION? Combustion takes place when fuel, most commonly a fossil fuel, reacts with the oxygen in air to produce heat. The heat created by the burning of a fossil fuel is used in the operation of equipment such as boilers, furnaces, kilns, and engines. Along with heat, CO2 (carbon dioxide) and H20 (water) are created as byproducts of the exothermic reaction. CH4 + 2O2 CO2 + 2H2O + Heat C + O2 CO2 + Heat 2H2 + O2 2H2O + Heat By monitoring and regulating some of the gases in the stack or exhaust, it is easy to improve combustion efficiency, which conserves fuel and lowers expenses. Combustion efficiency is the calculation of how effectively the combustion process runs. To achieve the highest levels of combustion efficiency, complete combustion should take place. Complete combustion occurs when all of the energy in the fuel being burned is extracted and none of the Carbon and Hydrogen compounds are left unburned. Complete combustion will occur when the proper amounts of fuel and air (fuel/air ratio) are mixed for the correct amount of time under the appropriate conditions of turbulence and temperature. Although theoretically stoichiometric combustion provides the perfect fuel to air ratio, which thus lowers losses and extracts all of the energy from the fuel; in reality, stoichiometric combustion is unattainable due to many varying factors. Heat losses are inevitable thus making 100% efficiency impossible. Oxygen Heat Fuel In practice, in order to achieve complete combustion, it is necessary to increase the amounts of air to the combustion process to ensure the burning of all of the fuel. The amount of air that must be added to make certain all energy is retrieved is known as excess air. In most combustion processes, some additional chemicals are formed during the combustion reactions. Some of the products created such as CO (carbon monoxide), NO (nitric oxide), NO2 (nitrogen dioxide), SO2 (sulfur dioxide), soot, and ash should be minimized and accurately measured. The EPA has set specific standards and regulations for emissions of some of these products, as they are harmful to the environment. Combustion analysis is a vital step to properly operate and control any combustion process in order to obtain the highest combustion efficiency with the lowest emissions of pollutants. BTU00 series BTU1100 series WE MAKE IT EASY. kele.com USA 1415

26 PNEUMATIC TRANSDUCERS CONSUMPTION & CAPACITY CONSUMPTION & CAPACITY Selecting the proper E/P transducer for an application involves more than choosing the input signal and output pressure range. Air consumption and capacity are important specifications when considering the best transducer for the job. AIR CONSUMPTION An E/P transducer is designed to vary air pressure to a pneumatic load like an actuator based on a varying electronic signal from some sort of controller. The source of air pressure used by E/P transducers originates at the air compressor and makes its way to pneumatic devices throughout the building via tubing. Different types of E/P transducers use different techniques to vary the air pressure to their output or branch line. Some transducers incorporate a design that is similar to pneumatic thermostats and controllers with a nozzle and flapper, for example the UCP-242 and UCP-4. These transducers will allow a small amount of air to escape to the atmosphere (air consumption), measured in units of scfm (standard cubic feet per minute). Actual air consumption can be affected by the amount of main air pressure but is normally specified as an average value such as scfm. Since there is a given amount of air available in the main air lines and the air compressor s storage tank, the number of pneumatic devices that consume air will affect how often the air compressor runs as well as the size of its storage tank. If the available pneumatic air supply will not support numerous air consuming E/P transducers, there is another type of transducer design that uses two solenoid valves to increase and decrease pressure in the branch line and does not constantly bleed air, other than what is exhausted from the branch line during normal operation. The UCP-7 and UCP-8, for example, consume no air in steady state. AIR CAPACITY A pneumatic transducer s air capacity specification defines how much air volume can flow through the transducer in a given amount of time. Air capacity is usually specified in units of scim (standard cubic inches per minute) or scfm at a particular main air pressure with a minimal pressure drop across the transducer. A typical air capacity specification for a pneumatic transducer might be 500 scim at 20 psi with a 1 psi pressure drop. Calculating the exact time it would take an E/P transducer to completely fill an actuator to full pressure is more than dividing the total volume connected to the E/P transducer s output (including the actuator and tubing) by the E/P transducer s air capacity. You must also consider the force of the internal actuator spring and the load connected to the actuator. These act against the pressure building in the actuator as opposing forces and slow the rate at which pressure builds in the actuator. Depressurizing a given volume of air actually takes longer than it does to pressurize. When building up pressure, the transducer allows main air to flow into the branch line. When depressurizing, the E/P transducer opens the branch line to the atmosphere allowing air to escape from the actuator and tubing. Selecting the proper E/P transducer for an application is important. Kele stocks a complete selection of electronic to pneumatic transducers that will meet the requirements of most any application. UCP-4 UCP USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.