SuperEvac LCD Vacuum Gauge Full Range. Digital LCD Vacuum Gauge. Digital Vacuum Gauge

Transcription

1 SuperEvac LCD Vacuum Gauge Full Range Full range model reads atmosphere to 1 micron without recalibration. No adjustments or warm-up. Normal handling and jarring will not affect the LCD reading Case protects electronic circuitry and sensor Calibration standards traceable to NIST Automatic shut-off 20 minutes after power up and no change Precision circuitry controls sensor and translates sensor input into micron readings Made in the USA Part # Description Full range vacuum gauge complete in case. Digital LCD Vacuum Gauge Connect this easy to read bar graph gauge directly to the system, pump, or in line, and know where you are in the evacuation process. Track down 14 increments from atmosphere to 25 microns to know that the system is clean and your vacuum pump is performing properly Part # Description Vacuum gauge w/battery hook and case Digital Vacuum Gauge Replaceable, cleanable, plug-in sensor (Part #69087) handles 450 psi positive pressure Displays 7 different units of vacuum (microns, millitorr, Torr, millimeters of mercury 12" coiled sensor cord stretches to 24" for easy reach, connectivity and readability of display Automatic shut-off after 20 minutes 32 to 122 F (0 to 50 C) operating temperature range 14 oz. (392 g) with battery Accuracy: +/- 20% of reading Made in the USA Part # LED vacuum gauge kit complete with case Gas Pressure Test Kit Easier to use than a manometer, this compact kit helps you accurately set manifold pressure for natural or L.P. gas. # 78060

2 Digital Electronic Charging Scales Eliminates refrigerant transfer from tank to cylinder to system. The cylinder with refrigerant is weighed before and after charging. Charge directly into the system or recover from the system. # Electronic scale 110 lbs. # {rogrammable electronic scale 110lbs. Digital Psychrometer Quickly measure humidity, dry bulb, dew point and wet bulb. No need to whirl a meter or refer to a chart for results. F/ C switchable Data hold Auto power off Display relative humidity and temperature simultaneously Response time of 60 seconds to changes in humidity #69008 Heat Gun 600 and 1000 F settings. Shockproof and tough housing is durable and lightweight. Coil defrosting Faster vacuums Drying out condensation in motors, clutches, etc. # Kit includes gun, adapters and case. Pistol-Grip Infrared Thermometer With wide measurement of -40 to 932 F, this easy-to-use tool is the effective choice for high or low temperature and refrigeration applications. For accuracy and resolution, the focal point is a tight 10:1 ratio with laser sighting. Selectable 3-point emissivity for simple set-up Backlight for dark area use F/ C switchable ±2% or 2 C accuracy 0.1 F resolution at -40 to 212 F (-40 to 100 C) Fast response time of 500 msec # Infrared Thermometer Target a surface and press the power key to take a fast and safe non-contact laser sighting temperature reading. 95 percent response in 500 msec at -4 to 788 F (-20 to 420 C). To take readings in low light, the large LCD features a switchable backlight. Real time temperature of surface measured Highest and lowest temperature taken Average temperature from the time the power key was first pressed Determines net temperature difference between two surfaces or readings of the same surface to calculate net heating or cooling # 69235

3 The DM383B is a best seller among HVAC and appliance technicians. Upgraded with the new backlit EasyView Display makes reading the extra-large 4000-count display simple in dark work environment or bright sunlight, plus the range and function indicators provide more on-screen information. New EasyView Display 750 Volts AC and 1000 Volts DC 10 Amps AC and DC Resistance to 40 Mehohms Diode check function Continuity 3 3/4" Digit, 4000 count display Max capture mode Data hold On-screen range and function indicators CE and UL listed 600V CAT III Five year limited warranty The DM384 is a full-sized multimeter specifically upgraded to meet the needs of today s HVAC/R technicians, plant maintenance professionals, and electrician's. Like the DM383B, this also features the new backlit EasyView Display to allow superior viewing in either bright sunlight or dark work environments. Professional functions include MIN/MAX capture for unattended monitoring, capacitance for checking run/start capacitors, and frequency for quick verification of generators, inverters, and control circuit operation. New EasyView Display 750 Volts AC and 1000 Volts DC 10 Amps AC and DC.01 μa DC resolution for flame safeguard circuit testing Frequency to 400 Megahertz Capacitance to 20,000 Microfarad Diode check function MIN/MAX captures and data hold CE listed CAT III Five year limited warranty The DM393 is one of our safest industrial duty meters ever made. All inputs, ranges and functions protected to 1000 Volts CAT III. Perfect for HVAC and electrical technicians whose applications require higher accuracy measurements and True RMS precision. Built in temperature means one less instrument to bring to the job. All inputs, ranges and functions protected to 1000 V CAT III True RMS AC Volts and Amps Access to battery and fuses without breaking calibration Capacitance measurement from 40.00nF to 100.0μF 0.5% basic DC accuracy Frequency measurement to 10MHz 4,000 count backlit display Autoranging Temperature from -40 to 2372 F Five year limited warranty The DM200 ElectroMate will perform everyday basic electrical tests easily and economically. Connect the test leads, turn the DM200 on, set the function switch to the proper setting and you are ready to take AC/DC volt, continuity or resistant measurements. 600 Volts AC and DC Continuity Resistance to 200 ohms Manual ranging 3-1/2" digit, 2000 count display Protective rubber boot UL and CE listed CAT II One year limited warranty The DM5B offers the functions, ranges and accuracy typically found in full-sized multimeters. The meter, replaceable test leads, and manual are conveniently packaged in a pocket-sized case 750 Volts AC and DC 5 Amps AC and DC Continuity Resistance to 30 Megohoms Autoranging Analog bar graph Data hold Fuse protected current ranges One year limited warranty

4 G2PHOENIX PRIME: DL V AC/1000V DC 400A AC 2000μA AC/DC 40MΩ Resistance/Continuity 4000μF Capacitance Non-Contact Voltage 24~600V AC Frequency/Duty Cycle Diode Data Hold MIN/MAX Dual Display Low Battery Display Lock Test Lead Storage Test Lead Holder on Clamp Head Auto Off Three Year Limited Warranty CATIII 600V, CATII 1000V Test Leads Zippered Case 2AAA batteries G2PHOENIX PRO: DL379 All the DL369 PLUS ~ 752 F Temperature (K type) All the DL369 PLUS... Input Jack Lock Detachable Clamp Head Worklight Magnetic Mount User Temperature Calibration EasyView High Contrast Backlight Display Compatible with common Industry Accessories Heads Three Year Limited Warranty CATIII 600V, CATII 1000V Test Leads K type probe (no adapter required) Zippered Case 2AAA batteries G2PHOENIX PRO+: DL389 All the DL369 PLUS... TRUE-RMS(AC Volts & AC Amps) -40 ~ 752 F Temperature (K type) All the DL369 PLUS... Input Jack Lock Detachable Clamp Head Worklight Magnetic Mount User Temperature Calibration EasyView High Contrast Backlight Display Compatible with common Industry Accessories Heads Three Year Limited Warranty CATIII 600V, CATII 1000V Test Leads K type probe (no adapter required) Zippered Case 2AAA batteries G2PHOENIX HOOK Extended Clamp Head: CH3 Measures 100A AC Non-Contact Voltage in tip Worklight Patented Virtual Closed Core Accuracy Works exclusively with the PRO and PRO+* Three year limited warranty Specifications Range: 0 100A Resolution: 0.1A Accuracy: 2.0% ±20 dgts Interference from adjacent wires: A

5 Universal Enterprises Inc. APOLLO II DT302 Dual Thermocouple input Differential T1-T2 Temp range -346 to F (J) Temp range -328 to F (K) Data logging 9,999 Memory positions USB interface (software included) Thermocouple temperature offset MIN, MAX, AVG & Hold Probe Storage Accepts J, K, T and E type probes 5 year limited warranty IP67 Water submersion (3 for 30 min.) High pressure dust resistance (max depression of 20 mbar for 8 hours) CAT 1 Overvoltage CE Certified 2 K type probes with lead wraps 2 AAA batteries Quick Start Guide Owners Manual APOLLO IV DT304 Quad Thermocouple input Differential T1-T2 and T3-T4 Temp range -346 to F (J) Temp range -328 to F (K) Data logging 9,999 Memory positions USB interface (software included) Thermocouple temperature offset MIN, MAX, AVG & Hold Probe Storage Accepts J, K, T and E type probes 5 year limited warranty IP67 Water submersion (3 for 30 min.) High pressure dust resistance (max depression of 20 mbar for 8 hours) CAT 1 Overvoltage CE Certified 4 K type probes with lead wraps 2 AAA batteries Quick Start Guide Owners Manual The DT20A has the following features: -58 to 571 F (-50 to 300 C) Dual probe inputs Dual display lets you monito any two of T1, T2 or differential (ΔT) MIN/MAX record High visibility backlit display Data hold Includes two replaceable, submersible metal probes Three year limited warranty Cooper Thermometer, Thermistor Instrument SH66A DT20A/STKIT is the ideal kit for the HVAC/R technician to measure super heat Also Includes: ATT58A (2) 15 Barrell Type Temperature Probes ATT55A (2) 4 Liquid Temperature Probes ACS1 (2) Pipe Clamp Straps Flashlight 6:1 Phillips/Standard Screwdriver and Nutdriver AC319 Soft Carrying Case Thermometer, Thermistor instrument Range: - 40 to 300F Ambient Temperatuure Range 0 to 130 F / -18 to 54 C (90% RH non-condensing) General surface probe # 1075 Air probe: # 2010 Surface probe # 4011

6 Universal Enterprises Inc. Eagle 1 (C75) Combustion Analyzer KMIRP2 Infrared Thermal Printer Flue Probe AACA4 AC adapter AC75 soft carrying case w/protective foam interior Particle filter Thermal printer paper roll Owners guide Carbon Monoxide Tester The CO71A NEW- CO sensor self test NEW- Long life CO sensor Preset alarms 3-color warning light Audible alert MAX capture Low battery indicator CO detection to 999 ppm Backlit display One button auto zero Three year limited warranty (Five year expected sensor life) Electronic Manometer EM201 Combustibile Leak Detector The CD100A Simple adjustable tic rate Easy one hand operation Long 18 gooseneck Tip light in sensor cover illuminates the area of the leak Sensor provides accurate detection Audio and visual tic rate Headphone jack One year limited warranty Dual input differential measurement to ±40 wg Triple Scale: inwg, mbar and PSI Ruggedized, including rubber boot with integral magnet Measures in inches water gauge and mbar Auto power-off after 20 minutes Min/Max value capture Data Hold Back-lit display 1 year limited warranty Super Heat/Sub Cool Meter # SSM1 Pressure from 0~500 psia Temperature from -40~400 F Calculates Superheat for low side Subcool for high side (TXV systems) Refrigerants included for calculations R22, R 134a, R404a, R410a Includes ATTPC2 Pipe Clamp Temperature Probe T fitting allows refrigerant to be added or removed with the SSM1 connected Specifications

7 TEMPERATURE AND HUMIDITY READINGS IN A CONVENIENT PEN-STYLE CASE Digital Thermo- Hygrometer Temperature from 14 to 122 F (-10 to 50 C) Humidity from 5 to 95% RH Fast, accurate electronic sensor Displays relative humidity and temperature at the same time MIN/MAX Record Data Hold Auto power-off # DT10 Digital Air Flow Meter Measures Air Velocity, Temperature and Relative Humidity Calculate Wet Bulb, Dew Point, and Air Volume (CFM, CMM) Protective twist cap for temperature/humidity sensor 8-Point Average for Air Velocity 60 Second Average for Air Volume Professional remote vane English/Metric scales Low battery indication Microprocessor circuitry for reliability Auto Power Off selectable Powered by 1 9V battery # DAFM3