Technical Specifications

Transcription

1 a & m sales, inc. p.o. box 171 chagrin falls, ohio 44 (44) Cable Lasher Aerial Equipment Cable Lasher The Condux Lasher is designed for bare strand and over-lashing applications and can facilitate single lashing and double lashing. Because the lasher is wire driven, actual lashing remains consistent in spacing and tension throughout the span, Lasher slippage is no longer a problem. The Condux Lasher is equipped with a contoured protective cover to prevent damage from tree branches and other obstacles. The lasher is weather resistant, with all components either plated, coated or made from non-corrosive materials. Condux International offers in-stock replacement parts and kits to keep the lasher productive. The Condux Lasher also comes in a reusable container for storage and shipping. The lasher is precision manufactured in the USA by Condux International with over years of technical experience. Every Condux Lasher is backed by the Condux commitment to reliable customer service. Condux International also provides detailed product information, as well as handson product training at the Condux training facility in Mankato, Minnesota. Comprehensive product literature, user-guides and safety manuals on the Condux Lasher are also available. Durable & weatherproof User-friendly design High level customer service Large lashing capacity. Up to 4" (1 MM) diameter bundle. Bare strand lashing & over-lashing Lightweight Technical Specifications Height: 1-3/8" (64 mm) Physical Length: -1/" (51 mm) Specifications Width: 13-1/" (343 mm) Weight: 37 lbs. (17 kg) 5-1/" (14 mm) to 6-1/" (165 mm) Outside Diameter Spool 1-5/8" (41 mm) to 1-7/8" (48 mm) Inside Diameter Wire Spool 1-11/16" (43 mm) to 1-13/16" (46 mm) Thick Geometry &.38(1 mm) to.8"(mm) wire diameter range Characteristics Wire Example:.45"(1.14 mm) diameter wire = 1 ft. (366 m) on spool Example:.38"(.97 mm) diameter wire = 16 ft. (488 m) on spool The wire length/spool relationship is comparable for other wire diameters up to.8" ( mm). Strand Sizes Runs on 1/4" (6 mm), 5/16" (8 mm), and 3/8" (1 mm) diameter strand Lashing Capacity 4" (1 mm) diameter bundle or 3-1/" (89 mm) diameter single cable/duct lasher opening capacity Protective cover & brush guards add longevity & productivity to the lasher The lasher can facilitate single or double lashing on bare strand or over-lashing applications. Manual drum locking mechanism adds safety to every job. Call A&M TOLL FREE or FAX (888) Lasher wire spool installation is fast & easy - 1

2 Single Roller Support a single coaxial, fiber optic or copper cable or aerial innerduct up to.75" (7 mm) outside diameter with the Single Roller s. A built-in strand lock fits up to 3/8" (1 mm) strand to prevent creeping. The lock will be released when struck by a cable block pusher ahead of a cable lasher. Frame is high-impact lightweight molded plastic with steel inserts on strand contact surfaces. Roller is high-impact plastic. Single Roller s may be equipped with a steel cable retainer to keep the cable or innerduct on the roller, even in low-tension situations Roller/Cable Config. 186 Single roller cable block (7 mm) 181 Single roller cable block (7 mm) with cable retainer Pole Mount Single Roller The Pole Mount Single Roller is specially designed for easy mounting and free-rolling required in figure 8 cable construction. Quickly mounts to a 3-bolt strand clamp on a pole and allows pulling from pole to pole. Support a single coaxial, fiber optic or copper cable or aerial innerduct up to.75" (7 mm) outside diarneter. Steel frame, with high-impact plastic roller. Pole Mount Single Roller s may be equipped with a steel cable retainer to keep the cable or innerduct on the roller, even in low-tension situations Roller/Cable Config Single roller cable block (7 mm) 186 Single roller cable block (7 mm) with cable retainer - Fiber Optic Overlash Block 7189 Mini Block This versatile, economical block supports any cable up to 1-1/4" inch in diameter, including coaxial, so you can use it for CATV cabling. There is a lifting ring for easy strand placement, a molded rubber roller for smooth motion, and a steel sleeve and shaft for durability. The hot rolled steel frame is brightcoated for extra visibility and corrosion resistance. Weight 1315 Mini Block lbs. Fiber Optic Overlash Block This block lets you overlash to cable bundles up to inches accross and its affordability lets you use more blocks for smoother, neater lashing on new or rebuilt construction. Ideally suited for messenger strands from 1/4" to 3/8". Easy to raise and attach. The keeper retains the block on the messenger and the fiber cable is positively retained in the block. This block has a gritty non-skid surface that rests against the strand to keep it from sliding during the pulling in of cable. The frame is made of electro-galvanized steel and is designed for the optimum strength to weight ratio and is equiped with and anti-friction roller and lever actuated keeper bar which encloses the cable in the block. Weight 7189 Fiber Optic Overlash Block 3 lbs. 1 oz. Call A&M TOLL FREE or FAX (888)

3 a & m sales, inc. p.o. box 171 chagrin falls, ohio 44 (44) Overlash Fit Overlash s over an existing cable bundle up to 3" (76 mm) in diameter and support one or two 1. 5" (3 mm) diameter cables or innerduct. Built-in cable retention system allows placement and removal from ground. High-impact plastic frame with steel cable retention mechanism and steel inserts on strand contact surfaces. Rollers are available in steel or plastic. Maximum Cable Part Diameter Roller Number Description (in) (mm) Material Overlash cable block Plastic with single rollers Overlash cable block Steel with 1 double roller Economy Overlash This alternative cable block may be placed over existing cable bundles up to 1.5" (38 mm) in diameter. Single rollers are available in plastic or steel and can accommodate cable or innerduct up to 1." (5 mm) diameter. Lightweight zinc-plated steel frame opens and closes for easy installation and ensures cable retention. Maximum Cable Part Diameter Roller Number Description (in) (mm) Material Economy overlash 1. 5 Plastic cable block Economy overlash 1. 5 Steel cable block Degree and 9 Degree Corner Blocks Ensure minimal drag is placed on the cable and that minimum bend radius is not exceeded. Pole-mounted blocks guide cable around an inside or outside corner. A crossover brace is added for mid-span corners. Corner blocks are available in 9 degree and 45 degree configurations and with a variety of cable carrying capacities. 9 Degree Large Diameter Corner Block A larger bend radius of 3" (584 mm), makes this block effective for larger diameter cable and innerduct up to.75" (7 mm) diameter. Welded and painted steel frame. Plastic rollers are durable and lightweight. Roller/Cable Config corner cable block (7 mm) Call A&M TOLL FREE or FAX (888)

4 Multiple Roller Support multiple cables on independent rollers with Multiple Roller Cable Blocks. All blocks have built-in cable retaining arms and a strand lock (up to 3/ 8" (1 mm) strand). Operate the open/close mechanism with just a quick pull by hand or from the ground with a lay-up stick. Frame is high-impact molded plastic with steel cable retention mechanism and steel inserts on strand contact surfaces. Rollers are high-impact plastic. A space saver model is available that requires only 9" (9 mm) of vertical clearance. All 4 rollers are on one axle. Roller/Cable Config roller cable 1.5" (3 (19 mm) roller cable block 1.5" (3 mm) (19 mm) Space saver multiple 1." (5 mm) roller cable block Space Saver Pole Mount Multi Block Hanger An excellent means of hanging s at the pole where strand is not available. Mounts directly on pole using existing 3-bolt clamp or on extension brackets Pole Mount Multi Block Hanger Economy Condux offers economical cable blocks for support of one or two cables or innerduct up to 1.5" (3 mm) outside diameter. Use on strand up to 5/16" (8 mm) diameter. Integrated cable retaining system with spring-loaded arm. Frames are made of high-impact plastic with steel inserts on strand contact surfaces. Rollers are high-impact plastic or steel Part# Description Roller/Cable Config. Material Overlash cable block, 1.5" (3 mm) Plastic single 1841 Economy cable block 1.5" (3 mm) Steel single 1841 Economy cable 1.5" (3 mm) Plastic double Call A&M TOLL FREE or FAX (888)

5 a & m sales, inc. p.o. box 171 chagrin falls, ohio 44 (44) Degree Corner Blocks With a bend radius of.5" (565 mm), these corner blocks feature a welded and painted steel frame with angular and vertical reinforcements. Plastic rollers are duable and lightweight. Adjustable rubber idler arm retains cable in position. Roller/Cable Config corner cable 1.5" (3 (19 mm) corner cable block 1.5" (3 mm) corner cable block 1.5" (3 mm) corner cable 1.5" (3 mm) 9 Corner Corner Corner Corner Degree Corner Blocks 45 Degree Corner Blocks are used to guide cable on inside or outside corners and are used as a cable chute in reel-to-strand spans, or mid-spans. These cable blocks ensure minimal drag is placed on cable and that the minimum bend radius is not exceeded. Mounts on Pole Bracket with or without Pole Bracket Mount Adapter, or with Set-Up Brackets, depending on the application. 45 Degree Large Diameter Corner Block Large bend radius of 3" (584 mm) can guide a single cable up to.75" (7 mm) diameter. Use in corners or as a cable chute. Welded and painted steel frame. Plastic rollers are durable and lightweight. Mounts on Pole Bracket with or without Pole Bracket Mount Adapter, or with Set- Up Brackets, depending on the application. Roller/Cable Config corner cable block (7 mm) Call A&M TOLL FREE or FAX (888)

6 45 Degree Corner Block Excellent tool to guide up to 4 cables in corners or use as a cable chute. Offers a bend radius of.5" (565 mm). Welded and painted steel frame with adjustable rubber idler arms for cable retention. Plastic rollers are durable and lightweight. Mounts on Pole Bracket with or without Pole Bracket Mount Adapter, or with Set-Up Brackets, depending on the application. Roller/Cable Config corner cable 1.5" (3 (19 mm) corner cable block 1.5" (3 mm) corner cable block 1@ 1.5" (3 mm) corner cable 1.5" (3 mm) 45 Corner Corner Corner Corner Pole Bracket Use the Pole Bracket for all 9 Degree and 45 Degree Corner Blocks. A ratcheting strap design provides easy set-up, while offering a tight fit to the pole. Bracket is steel with a vertical shaft to receive Corner Block. A safety clip is provided to hang unit from strand while installing Pole Bracket Mount with ratcheting strap Pole Bracket Mount Adapter Installs easily on the Pole Bracket to provide a horizontal axis to mount 45 Degree Corner Blocks that are to be used as a reel-to-strand chute Pole Bracket Mount Adapter (requires Pole Bracket) - 6 Call A&M TOLL FREE or FAX (888)

7 a & m sales, inc. p.o. box 171 chagrin falls, ohio 44 (44) Set-Up Bracket A versatile tool that provides a mid-span mount for a 45 Degree Corner Block when a pole is not nearby. The Set-Up Bracket is secured to the strand with a strand clamp, safety snap, and tightening knob (all included). The strand attachment assembly swivels to ensure proper allignment with cable reel, allowing flexibility in cable reel and Set-Up Bracket positioning. Steel constructon. Part Description 1811 Set-Up Bracket Crossover Brace Provide support for a mid-span corner using a 9 Degree Corner Block. The Corner Block is secured to the strand with 3-bolt clamps (not included) and one end of the Crossover Brace is installed in the same position as a Pole Bracket would be. The other end is connected to the strand (parallel to the direction of the pull). This forms a secure corner in which cable may be pulled with proper support and without bending or kinking Crossover Brace Overhead Fiber Optic Cable Sheave Specially designed in cooperation with Alcoa Fujikura Ltd. for guiding fiber optic or CATV cable safely and efficiently, Cable Sheaves feature an innovative hanger arm that eliminates the possibility of cable coming off the sheave or binding against the support arm. With the removal of a pin, the hanger arm separates and allows cable to be slipped in easily, even at midpoints. A inch (559 mm) sheave diameter allows for a gentle cable arc. Aluminum sheave construction means durability with less weight. Maximum capacity is 1,5 lbs. (6,67 N). Replacement Sheaves are available. Diameter Overhead Fiber Optic Cable Sheave 1" Overhead Fiber Optic Cable Sheave " Cable Chute Essentially a Set-Up Bracket with a chute built-in, it creates a path from cable reel to strand. Used in less demanding applications where the reel and strand are aligned, eliminating the need for a Set-Up Bracket and 45 Degree Corner Block. The Cable Chute is secured to the strand with a strand clamp, safety snap, and tightening knob (all included). The strand attachment assembly swivels to ensure proper alignment with cable reel. Chute surface is a fricton-reducing high-impact synthetic Cable Chute with Bracket Call A&M TOLL FREE or FAX (888)

8 Lay-Up Sticks High-strength fiberglass poles are available in 3-foot (.9 m) and 6-foot (1.8 m) sections, Zinc-plated steel reinforced ends with spring-loaded button attachment ensure a positive lock when adding additional sections. Fits standard 1.5" (3 rnm) (inside diameter) attachments such as Wire Raising Tool and Lifter. Number of Length Sections (ft) (m) Lay-Up Stick Lay-Up Stick Lay-Up Stick set, 18' (5.4 m) Lay-Up Stick set, 1' (6.3 m) ' (1.8 m) Lay-Up Stick Set ' (.9 m) Lay-Up Stick Set Wire Raising Tools Raise cable and wire and place cable blocks onto a strand with these handy tools. Available with a single or double end fitting for use with all major manufacturers' Lay-Up sticks. Steel construction. Inside Outside Part Diameter Diameter Number Description (in) (mm) (in) (mm) Single End Wire Raising Tool Double End Wire Raising Tool Lifter Place and remove cable blocks onto strand safely and easily from the ground. Two end fittings are incorporated into the product to fit all major manufacturers Lay-Up Sticks. Steel constructon. Inside Outside Part Diameter Diameter Number Description (in) (mm) (in) (mm) Lifter Tree Pruning Kits - Ready To Use Each kit comes ready to use - just snap the factory assembled Pruner, Adapter, and Rope into any of the fiberglass handles to begin pruning. Three each, six foot handles are included in any one of the three kits. The handle can be used for: wire raising, cable lifting and in conjunction with leak detection devices. Handles are available in Hollow or Foam core. Ask about kits made to your specs. (Call for part numbers on your particular needs) - 8 Call A&M TOLL FREE or FAX (888)

9 a & m sales, inc. p.o. box 171 chagrin falls, ohio 44 (44) Aerial Cable Puller Pull multiple cables easily and safely prior to lashing. Cables attach to quickconnect links and pulling eyes that swivel during pulling to avoid tangles and possible cable damage. A spring-loaded strand brake holds the unit in place when pulling is stopped and tension is reduced. The brake releases when tension is increased and pulling is resumed Multiple Cable Puller for 1/4" (6 mm) and 5/16" (8 mm) strand Multiple Cable Puller for 5/16" (8 mm) and 3/8" (1 mm) strand Overlash Aerial Cable Puller Designed to pull up to 4 new cables over existing bundles. The Overlash Aerial Cable Puller uses large high-irnpact plastic rollers that roll easily and safely over existing bundles of up to.75" (7 mm) in diameter. Cables attach to quick-connect links and pulling eyes that swivel during pulling to avoid tangles and possible cable damage Overlash Aerial Cable Puller Cable Positioners Keep multiple cables uniformly positioned in front of the lasher with a Cable Positioner. Three models are available in configurations to accept two, three, or five cables. The five-cable model positions the trunk cables on top, keeping the distribution cables at the bottom of the bundle for easier access later. Fits 1/4" (6 mm) and 5/16" (8 mm) strand. Maximum Hole Cable (number) (in) (mm) Cable Positioner, -Hole Cable Positioner, 3-Hole (top) Cable Positioner, 5-Hole 3 (bottom) Cable Positioner Cable Positioner Cable Positioner Pusher Non-conductive polyethylene shotgun wraps over strand to provide a safe distance between cable positioners, cable blocks, and cable lasher during lashing operations. Available in " (58 mm) and 4" (1,16 mm) lengths Cable block pusher, " (58 mm) Cable block pusher, 4" (1,16 mm) Call A&M TOLL FREE or FAX (888)

10 Coaxial Cable Benders Designed specifically for coaxial cable. The Coaxial Cable Bender offers an excellent means for forming long-life expansion loops into cable. It is essential for the cable to maintain its roundness during the bending process in order to assure proper signal transmission. This is especially important in today s multimedia digital systems. Cable bending with this equipment also assures proper bend radius for specific diameter cables. These Cable Benders meet or exceed cable manufacturer recommendations for length, depth and radius of the loop and are available in mechanical form and hand-form products. Bend cables one at a time or in multiples with single, double and quad bender configurations. Accomodate cable diameters of.75" (19 mm), 1." (5 mm) and 1.5" (3 mm). Mechanical benders offer a 5-year loop life minimum, while UltraBend products deliver a loop life of 5 plus years and are available in standard steel frame or lightweight aluminum. Select a Cable Bender using cable diameter, number of cables, loop life, and frame material as guidelines. Ultrabend Cable Bender The finest mechanical cable bender forms expansion loops with a life exceeding 5 years. Extended length nylon shoes allow easier set-up and a more sure fit to your cable. Includes ratchet handle. Available in steel frame and lightweight aluminum frame construction. Maximum Maximum Loop Loop Loop Loop Part Number Cable Diameter Frame Depth (D) Length (L) Radius (R) Bottom (B) Number of Cables (in) (mm) Material (in) (mm) (in) (mm) (in) (mm) (in) (mm) Steel Aluminum Steel Aluminum Standard Cable Bender Standard Coaxial Cable Benders provide mechanical wrenching action to form expansion loops with a life of over 5 years. Four nylon shoes provide cable support and assure minimal stress during the bending process. Quality-built with a steel frame, hardened on rack and gear. Achieve consistent performance, and do no additional hand forming with Standard Cable Benders. Double Standard Cable Bender Quad Standard Cable Bender Maximum Maximum Loop Loop Loop Loop Part Number Cable Diameter Depth (D) Length (L) Radius (R) Bottom (B) Number of Cables (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) Call A&M TOLL FREE or FAX (888)

11 a & m sales, inc. p.o. box 171 chagrin falls, ohio 44 (44) Mullen (Hand) Cable Bender Hand-form expansion loops using the economical Mullen Cable Bender. Features steel frame with polymer cable guide and built-in hanging mount. Weighs only 5 lbs. (.3 kg). Maximum Maximum Loop Loop Loop Loop Part Number Cable Diameter Depth (D) Length (L) Radius (R) Bottom (B) Number of Cables (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) Strand Brake Minimize strand sagging during installation with the Strand Brake. Designed to allow strand to move in only one direction-the direction of the pull. Convenient mounting bracket is secured in a standard three-bolt strand clamp on a pole. Bracket swivels to allow slight offsets in pole alignment. A Strand Brake is a simple piece of safety equipment that can help avoid major problems associated with strand sagging. Available with ground wire clip that attaches to the ground wire of the first pole in series. Zinc-plated steel construction, Recommended use: Every 4 to 6 poles, and at every traffic crossing Strand Brake Strand Brake with Ground Throwing Weight A safer way to throw a pull line over obstacles. Three-inch (76 mm) diameter soft rubber outer shell encases a one pound (454 g) lead weight. Built-in eyelet Throw Weight Extension Brackets Maximize pole space efficiency and maintain minimum cable distance requirements by using the Extension Bracket. Supports strand and cable 1" (35 mm) to 36" (914 mm) away from existing lines on the same pole. Mounts on standard wood utility poles using 5/8" (16 mm) bolt hardware (not included), or mounts with banding straps (not included) on steel and concrete poles. Length Load (in) (mm) (lbs) (kg) Extension Bracket Extension Bracket Extension Bracket Extension Bracket Extension Bracket Call A&M TOLL FREE or FAX (888)

12 CR Collapsible Power Reel A 78 This reel is ideal for rapidly stringing or taking up wire or small diameter cable up to lbs. and can also be used as a capstan for taking up poly rope or tape. The reel mounts on any - 7/16" dia. winch extension shaft, and holds up to 1,6' of 1/4" dia. cable with a maximum allowable pull of 4, lbs. A half turn of the locking member collapses all six movable segments, so you can quickly mount or remove coils. The fixed spider, yokes and segments are all made of heat-treated aluminum, with a yellow enamel finish for extra safety. Specifications Length of Spindle 17" Diameter of Reel, expanded 8" Diameter of Reel, contracted 18-3/4" Inside diameter of Reel " Diameter of winch shaft -7/16" Weight 7 lbs. Fig. New No. Part No Description "CR" Collapsible Power Reel Repair Parts List Fig. New No. Part No Description 1 MV-3HO43 Sliding Spider (Steel) MV-3HO44 Fixed Spider (Aluminum) 3 MV-3HO53 Rim Segment (Saddles) 4 MV-3HO69 Sliding Pin, 4-11/16" Overall Length 5 MV-3HO7 Pin, 4-11/16" Overall Length 6 MV-3HO7 Pivot Pin, -7/8" Overall Length 7 MV-3HO73 Reel Arm Pin, " Overall Length 8 MV-3Hl38 Handle 9 MV-3Hl77 Link (Aluminum) 1 MV-3H18 Spindle Plug 11 MV-3Hl 9 Spacer 1 MV-3H55 Spring 13 MV-3H58 Spindle Spring 14 MV-3H74 Handle Bolt, 5/8" 18NF 3-1/4" 15 MV-3H83 Spindle Assembly 16 MV-3H91 Spindle Shims 17 5/8-18 CN Nut, Castle, 5/8" 18NF 18 5/8 W Washer, Plain, 5/8" SAE 19 3/ /8R Rivet, 3/8" x 3-1/8" 1/8 x 1 Pin, Cotter, 1/8" x 1" Handle and Plug Assembly - 1 Call A&M TOLL FREE or FAX (888)

13 a & m sales, inc. p.o. box 171 chagrin falls, ohio 44 (44) RS Power Reel Perfect for utility pole or underground work, this easy-to-use reel consists of a spool, driving and pole spindles, and two brake assemblies, one on each spindle. The spool is made of heavy-gage steel with a reinforced exterior facing. It will mount on either spindle, and has a 4-3/4" dia. wall and 6" dia. hub. The standard 6" wide spool can hold up to ' of 1/4" rope, while the new 1" wide version will hold up to 4'. The drive spindle will mount on any -7/16" dia. winch extension shaft, while the pole spindle can support the spool on a pole side if necessary. Placing the brake hub on the assembly (shown) holds the spool on the spindle. Manually pressing the brake hub against the spool also allows you to control spool free-wheeling. Inverting the brake hub will engage the spool and drive spindle in the driving position. A bright yellow enamel finish provides added safety. Driving spindle: 18-9/ 16" long. Pole spindle: 13-1/4" long Weight Complete Assembly. 16 lbs " Spool Only 5 lbs. 8366M 1" Spool Only 7 lbs Truck Spindle, Brake & Pin Only 9 lbs M Extra-Long Truck Spindle 33 lbs Pole Spindle, Brake, Pin & Binder 47 lbs M Extra-Long Pole Spindle 55 lbs Brake Assemby with Pin Only 7 lbs. Capstan This general-purpose capstan is just right for a wide variety of pulling and hoisting applications. It s cast from a high-strength alloy for low weight, and will fit on any -7/16' dia. winch extension shaft equipped with a bayonet mount. Working surface: 7-1/4" dia. x 8" wide. Wt. 38 Ibs. Weight G 177 Capstan 38 lbs. Reel Rollers - Style A This Reel Roller is designed for use in the warehouse or on the jobsite. A versatile tool that efficiently and easily handles reel sizes up to 7" wide. Designed for easy loading with the slanted ramp and full-width rollers. Style A Size (LxWxH) Weight Capacity Style A Reel Roller - Style A 8 x 31-1/ x 4 6 lbs. 1,5 7 HD - PR - PMS Reel Roller 9-1/ x 34 x 4-1/ 76 lbs. 3, Reel Rollers - Style B Built with four rollers... two effortlessly adjustable rear rollers and two rigidly aligned front rollers each equipped with separate spring-loaded roller locks. Accommodates individual operation of two reels of any diameter less than 4" (61 mm) wide on one platform or one reel of any diameter up to 48" (1 mm) wide. Style B Size (LxWxH) Weight Capacity Style B Reel Roller - Style B 8 x 5 x 4 11 lbs. 3, Call A&M TOLL FREE or FAX (888)

14 Style C Cable Reel Rollers The most versatile, most portable, space saving reel roller on the market today. Two separate roller assemblies accommodate any width reel.. of any diameter. Ideal for truck beds or any application where space is a factor. Easy to use... easy to handle... easy to store. Size (LxWxH) Weight Capacity 151 Cable Reel Rollers 17 x 7 x 4-1/ 3 lbs. 75 lbs. 15 Cable Reel Rollers 9-1/ x 9 x 4-1/ 54 lbs., lbs. 153 Cable Reel Rollers 9-1/ x 11 x 4-1/ 66 lbs. 3, lbs. Style C Cable Reel Rollers 8 x 9-1/4 x 4 7 lbs. 3, lbs. 156 Cable Reel Rollers 9-1/ x 1 x 4-1/ 7 lbs. 6, lbs. 151 SR Side Roller No Binding... Auxiliary Ball Bearing Side Rollers eliminate wedging of even the smallest of reels. Side slipping or creeping is controlled for easier, steadier reel handling regardless of size. All models predrilled (3 positions) for quick installation of side rollers. Set of two optional at modest extra cost. Part # SR Description SR Side Roller SR Side Roller Forklift Attachment for Reels Developed as a safe and efficient means for lifting, transport, or payout of materials stored on a reel (wire, cable, rope...). Entire assembly can be attached to fork tines in less than 1 minute. Features include 1/4" laser-cut steel construction and powder coated finish. Zinc plated T-Handle locking mechanism secures attachment onto fork tines. Models available for 4", 5" and 6" wide forks. (All Models include a 48" arbor support bar) Fork Width Weight 4 - ALF - PMS Forklift Attachment for Reels 4" 36 lbs. 5 - ALF - PMS Forklift Attachment for Reels 5" 37 lbs. 6 - ALF - PMS Forklift Attachment for Reels 6" 38 lbs. Cable Reel Turntables Engineered for horizontal pay-out of material stored on reels. Reel turntables are ideal for cable reels with flange or arbor hole damage. Features welded steel construction, removable hex-bore ball bearing reel rollers, solid steel hexagon roller axles and powder coated finish. Recommeded maximum Reel Diameters: 4 - SC - PMS = 4" Reel Diameter, 48 - SC - PMS = 48" Reel Diameter 48 HD - SC - PMS = 48" Reel Diameter Size Weight Capacity 4 - SC - PMS Cable Reel Turntable 19 x 19 x 3-1/ 3 lbs. 1, lbs SC - PMS Cable Reel Turntable 36 x 36 x 3-1/ 58 lbs. 3, lbs. 48 HD - SC - PMS Cable Reel Turntable 36 x 36 x 3-1/ 6 lbs. 6, lbs Call A&M TOLL FREE or FAX (888)

15 a & m sales, inc. p.o. box 171 chagrin falls, ohio 44 (44) Reel Jacks Telescoping Reel Jacks are light and easy to use in the plant or in the field. Two jacks are required to support each reel and our high tensile steel spindles are grooved on each end to prevent shaft creep and to provide a smooth pay out of cable as it rolls on our heavy duty cam roller bearings. Options: Extension Stands Arbor Cones Various Size Shafts Custom Designed Units Screw Type Reel Stands Welded steel wide base for added stability Roller bearings fit to the spindle groove keep the spindle in place and turning freely For a complete set-up, stands and a spindle bar are required Shown with 656 JR Stands & 6 SJR Spindle 6964 JR 656 JR Ratchet Type Reel Stand Ratchet mechanism to easily raise or lower the height Roller bearings fit to the spindle groove keep the spindle in place and turning freely For a complete set-up, stands and a spindle are required Reel Stand Spindles Tempered steel with grooves to fit reel stand rollers 965 JRDH Reel Capacity Shaft Size Part # O. D. Min. O. D. Max. Weight Part # O. D. Length JR 6" 56" 5, lbs. 6 - SJR -3/8" 6" JR 46" 96" 5, lbs SJR -3/8" 76" JRDH 56" 9" 15, lbs. 1 - SJRDH 3-1/" 1" Reel Brakes Help control excess reel spinning when pulling tension stops. Reel Brakes slide onto the reel bar and feature asbestos brake pads and a friction adjustment knob. Heavy Duty Reel Brake features two adjustable friction surfaces for smooth, controlled braking. Reel Bar FrictionDiameter Surfaces (in) (mm) Reel Brake Heavy Duty Reel Brake Heavy Duty Reel Brake.5 64 Call A&M TOLL FREE or FAX (888)

16 Reel Buck Hold up to 48" (1,19 mm) diameter reels when a trailer is not available. Designed for one-person handling. 4" (1,67 mm) long Spool Bar included. Maximum Spool Width (in) (mm) 1811 Reel Buck and Spool Bar Hand Truck Wire Cart Easy to transport and excellent for feeding and storing wire Dual Heavy-duty wire guides for dispensing multiple wires in all directions Storage space for 3 spindles and clips eliminates loose parts when they are not in use Hand Truck Wire Cart SPECIFICATIONS Size 46" High x 3" Wide x -1/" deep (1168 mm x 584 mm x 57 mm) Capacity Fifteen 5 ft. (15 m) spools up to 7" (17 mm) diameter x 5-3/8" (137 mm) wide Weight 58 lbs. (6.3 kg) Wire Cart Large capacity, excellent for storing, transporting or feeding wire Saves space, use and store vertically or horizontally 5 strong reel axles with spring clip retainers plus positions for axle storage allows you to configure for large reels with no loose parts Strong yet lightweight, tubular steel welded constuction with rugged 8" (3 mm) wheels Built in wire guide for horizontal dispensing Will pass through a 8" (711 mm) door SPECIFICATIONS Size 54-1/" (1,461 mm) long, 7" (686 mm) wide, 6-1/" (673 mm) high when horizontal Capacity Six,5' (76 m) or fifteeen 5' (15.4 m) spools of wire Weight 6 lbs (8.1 kg) 911/31518 Wire Cart Cable Reel Transporter All steel welded frame with heavy duty wheels Unique design provides easy setup for cable payout Handle folds to save space when using as a dispenser 916/3935 Cable Reel Dispenser SPECIFICATIONS Size 63" (16 mm) long, 9-7/8" (759 mm) wide, 6-3/4" (679 mm) high when horizontal Capacity Reels of cable or BX up to 4" (61 mm) wide and 4" (116 mm) in diameter Weight 11 lbs. (49.9 kg) Wire Spool Caddy A convenient and practical means of carrying and dispensing small quantities of spooled wire. Spools are held in position by zinc-plated R-clips. Constructed from welded steel tubing, this rugged and reliable wire spool caddy features 1/" solid steel spool support bars and a durable powder coated finish. Wire spool caddy will hold four spools up to 8" diameter x 9" wide. Size (WxDxH) Weight Capacity CH - PMS Wire Spool Caddy 1 x 13 x 1 8 lbs. 1 lbs Call A&M TOLL FREE or FAX (888)

17 a & m sales, inc. p.o. box 171 chagrin falls, ohio 44 (44) Electrician's Caddy A must-have tool for every electrician. This versatile and rugged folding wire spool caddy is designed for years of reliable in field service. Constructed from welded steel tubing, the Electrician's Caddy features () 1/" diameter solid steel zinc-plated spool support bars and a durable powder coated finish. Spools are held in place by zinc-plated R-clips. This caddy has a unique folding mechanism which facilitates convenient transport and storage without removing spool support bars. The Electrician's Caddy will hold (1) spool up to 16-1/" wide x " diameter or (4) spools up to 8" wide x 8" diameter. Size (WxDxH) Weight Capacity 4 - CE - PMS Electrician's Caddy x 18-1/ x 1 9 lbs. 1 lbs. Pull-Rite Spool Guide Designed by an electrician, the Pull-Rite Toll saves time and labor on all wire pulling jobs. Features injection molded construction for durability and light weight. This tool eliminates wire spool tangles and can be transfered to new spools in seconds. Easily adjusts to fit spools up to 5-1/" wide x 6-1/" diameter. (Most #1 and #14 spools) Weight 1 - PRP - PMS Pull-Rite Spool Guide 1 lb. Wire Measurer with Floor Stand The Wire Measurer features a heavy-duty steel base with telescopic upright section. Adjustable-height measurer accomodates a wide variety of flexible materials from 1/64" to 7/8" diameter. Digital counter adds or subtracts, and resets to zero with one turn of the reset knob. (Measures in feet and inches up to 9,999'-11") Swiveling nylon roller guide and integrated wire cutter increase measuring accuracy and ease of use. Conforms to weights and measures specifications in USA and Canada. (Metric version available upon request) Size (LxWxH) Weight MW - PMS Wire Measurer with Floor Stand 8 x 8 x lbs. Collapsible Coiler with Floor Stand Collapsible coiler features a heavy-duty welded steel base with telescopic upright section. Adjustable-height coiler forms a 16" inside diameter round coil which can be tied before collapsing. When collapsed, the formed coil off-loads to the front of the machine. Ideal for re-coiling materials stored on a reel rack system. Size (LxWxH) Weight 16 - RC - PMS Collapsible Coiler with Floor Stand 8 x 8 x 44 7 lbs. Cord Caddy Ideal, safe, no clutter unit for efficient use of heavy electrical cords. Adjustable tensi-hold controls speed for winding up or supplying cord at the job. Use vertically or horizontally. Cord guide assures proper wind - up. COMES WITH 4 OUTLETS SEE CHART BELOW. Part # Cord Length Outlets (ea.) Weight KH-8-CY NO CORD AMP 15 lbs. KH-8-CY-GF NO CORD AMP GFI 15 lbs. KH-8-CY-1C-5 1/3 SO SEO 6V 5' AMP 4 lbs. KH-8-CY-1C 1/3 SO SEO 6V 15' AMP 36 lbs. KH-8-CY-GF-1C 1/3 SO SEO 6V 15' AMP GFI 36 lbs. KH-8-CY-14C 14/3 SO SEO 6V ' 15AMP 41 lbs. KH-8-CY-GF-14C 14/3 SO SEO 6V ' 15 AMP GFI 41 lbs. Call A&M TOLL FREE or FAX (888) Reel: 18 gauge, Yellow Epoxy Coated Steel Frame: 1/" Steel Tubing Dimensions: 19 1/" H X 18 1/" L X 1 1/" W Weight: 1 1/4 lbs - 17

18 Cable Caddy Cable Caddy products are designed for the proper dispensing of drop cables. These lightweight caddies are portable, durable and help keep cable from twisting or becoming over-tensioned during pay out. Available in 4 models, all featuring tubular steel frames. Cable Caddy 11 (A) Support one reel of drop cable wire. Cable Caddy 1 (B) Collapsible frame has foam floor protectors on bottom. Fold to just 4" (11 mm) wide. Supports one reel. Cable Caddy 13 (C) Large capacity carrier has 6" (15 mm) wheels and upright support bar. Supports one reel. Cable Caddy 14 (D) Double reel capacity carrier has 6" (15 mm) wheels and extrasupportive frame. (A) (B) (C) Maximum Maximum Gross Load Reel Diameter Reel Width Capacity (in) (mm) (in) (mm) (lb) (kg) 1811 Single Reel Cable Caddy (A) Collapsible Cable Caddy (B) Heavy-Duty Cable Caddy (C) Dual Reel Cable Caddy (D) (D) The Reel Thing The Reel Thing Reeling devices aren t new, but this is THE REEL THING for wire and cable. It s economical, easy to use and works on a swivel. That s the difference. THE REEL THING cuts costs. In the field, THE REEL THING allows one man to do the job instead of three or four. In your warehouse, THE REEL THING allows one man to move, stack, or spin heavy reels. THE REEL THING cuts time laying underground cable. Just suspend the reel over the trench and go. That s fast. THE REEL THING is easy to use. One man can carry it with one hand. Just slip it into the cable reel hole, tighten the boom line and the toggle on the bottom slips into place. You re set to unwind. Removal is just as easy. Any lifting equipment can become dereeling equipment with THE REEL THING. Changing reels only takes minutes. Like we said, THE REEL THING makes the difference. A B C D Here s how THE REEL THING pays off A. Drop THE REEL THING into the arbor hole. B. Apply lifting pressure to the top ring. C. Toggle engages under top flange. D. Now, you re all set to unwind, stack or lift. Removal is just as easy. By releasing pressure on the lifting ring, the toggle drops to a vertical position for quick removal of THE REEL THING. TWO MODELS AVAILABLE ARBOR HOLE DIAMETERS Model Min. Max. RT- (one ton capacity) " 4" RT-4 (two ton capacity) 3" 6" - 18 Call A&M TOLL FREE or FAX (888)