Call Toll Free GO ALTEC

Size: px
Start display at page:

Download "Call Toll Free GO ALTEC"

Transcription

1 presents A.B. Chance Call Toll Free /05

2 A. B. CHANCE Company Mechanical Hoists p 3 Powered Hoists p 3 Hoist Accessories p 4 Unit Accessories p 4 Gins p 6 Anchor Tools p 7 Torque Indicators p 10 Grounding Equipment p 10 Conductor Support Equipment p 11 2 Call Toll Free

3 Mechanical Hoists Easy and fast to operate, lightweight for simple handling, but rugged for reliable duty. Compact and portable, these hoists fit into and operate easily even in close-clearance work spaces. They quickly and easily perform repeated heavy lifts and pulls. All working parts are fully enclosed in the housing unit to protect the hoist mechanism and to cover the gearing for worker safety. Forged-steel load hooks at both ends swivel 360 for easy attachment and to help maintain axial alignment in use. Two-way handle swings to either side. Rounded stop at end helps keep hand on handle. Available in 3/4, 1, 1 1/2, 2, 3, 4 1/2, and 6-ton ratings Handle Pull Hook-to-Hook Weight Part Number Rating at Rating Minimum (lbs.) /4-ton 65 lb. 11 in ton 90 lb. 11 in /2-ton 60 lb. 16 in ton 90 lb. 11 in. 28 1/ ton 60 lb. 19 3/4 in. 30 1/ /2-ton 70 lb. 24 1/2 in ton 70 lb. 24 1/2 in. 50 Powered Hoists The design features a multiple-planetary drive/backstopclutch assembled on the center shaft of a steel gearcase with full-length internal teeth. This design handles more rugged jobs, extends service life and reduces maintenance. These lightweight yet powerful, portable hoists move many heavyweight tasks and can get into remote or difficult to access sites. Available electrically or hydraulically driven Available with 1,000 or 3,000 lb. load rating Hydraulic Driven P/N ,000-lb. Includes power hoist Rope speed for 1,000 lb. load - 93 feet per minute Source minimum: 8 gallons per minute & 1,000 psi Electric Driven P/N Volt DC 1,000-lb. Includes 25 #2 Cu Cable, four terminals, relay, foot switch Rope speed for 1,000 lb. load - 22 feet per minute Source minimum: 90 amperes motor current P/N ,000-lb. Includes power hoist Rope speed for 1,000 lb. load - 30 feet per minute Source minimum: 8 gallons per minute & 1,000 psi P/N Volt AC 1,000-lb. Includes power hoist and foot control switch Rope speed for 1,000 lb. load - 40 feet per minute Source minimum: 14 amperes motor current P/N Volt AC 3,000-lb. Includes power hoist and foot control switch Rope speed for 1,000 lb. load - 12 feet per minute Source minimum: 14 amperes motor current WARNINGS: Do Not: 1. Lift more than rated load 2. Operate with twisted or damaged chain 3. Use if damaged or malfunctioning 4. Lift people or loads over people 5. Use a handle extender 7.Operate and maintain per ANSI B

4 Hoist Accessories Bolt-Down Bracket for 1,000-lb. hoists P/N Bolt-Down Bracket for 3,000-lb. hoists P/N Swivel-Base Truck Mount Turntable design permits proper alignment without repositioning service vehicle. Heavy-gauge steel base bolts direct to truck body wherever convenient. P/N All-Purpose Bracket for 1,000-lb. hoists P/N All-Purpose Bracket for 3,000-lb. hoists P/N P/N The rope lock device includes two mounting bolts, washers & release lanyard. The device accepts 1/2, 5/8, and 3/4 rope. P/N Unit Accessories Single Phase Conductor Holder Single lifting wire holder may be rotated for alignment with the conductor. Plastic rollers offer protection to conductors while raising the conductor above the work area. The gate is held closed by a spring-loaded latch which must be manually opened. For this holder to fit on the Altec Jib P/N , adapter P/N must be used. Maximum side load: 100 lbs. 2 1/2 opening P/N Single Wireholder Seven plastic rollers offer protection to conductors while raising the conductor above the work area. Accommodates conductors up to and including 1.5 inches in diameter. The gate is held closed by a spring-loaded latch which must be manually opened. Jib Mounted w/ 2.5 (63 mm) opening. P/N Square Adapter This adapter is used to connect the jib extension to the arm clamp assembly. P/N x4 Square Adapter Wireholder/Sheave Combo 2 1/2 opening For 3.00 diameter round jib 800 lb. max load 19 x 8 x 8 x 2 1/2 Can be used in conjunction with material handler P/N P/N For 3.00 diameter round jib For 4.00 diameter square jib Jib Extension This 3 diameter heavy wall Altec jib extension is 36.7 long with 7 holes that allow the jib to be adjustable. P/N Call Toll Free 4

5 Unit Accessories, cont. Auxiliary Arm Assembly Support arm for 3 diameter mast with solid Epoxirod pole. Designed for use on light construction when handling multiple conductors. Roller Wireholder This roller wireholder offers protection to conductors while raising the conductor about the work area. Fits on 2 or 2 1/2 solid Epoxirod P/N Roller Wireholder, no insulator, 2 opening P/N Roller Wireholder, no insulator, 2.5 opening Arm Clamp Assembly Connects the adapter to the solid 2 1/2 x 10 epoxirod P/N Solid Epoxirod P/N Auxiliary Assembly, complete 1 Solid Epoxirod, 2 1/2 x Complete Assembly Includes: 3 Roller Wireholders, no insulator, 2 opening Arm Clamp Assembly Solid Epoxirod, 2 1/2 x Adapter Round Adapter This adapter is used to connect the jib extension to the arm clamp assembly. P/N Round Adapter 5

6 Gins Chain Binder Type Transformer Gin A versatile tool for hoisting distribution transformers and apparatus up the structure. Available with a standard base or 5 extended base. The standard base unit is for mounting on clear pole sections and the 5 extended base model allows mounting to bridge up to 4 x 5 crossarms. Gins are not intended for applications involving side pull on the hoist line, or with the lift load in a tagged out position. Strap-Type Transformer Gin Similar to the chain binder type transormer gin, but with a strap-type ratchet-action mounting mechanism. The 2 -wide polyester strap comes in 44 length to fit most structures. The strap also has a 10,000-lb. rated tensile strength. Wide handle opening on rapid-action ratchet permits easy operation, even with rubber gloves and leather protectors. Wheel tightener and 36 chain is a part of each unit 2,000 lb. maximum rating, including hand pull force Pole Length: 26 inches Wheel tightener and 36 chain is a part of each unit 2,000 lb. maximum rating, including load and fall-line pull Pole Length: 26 inches Pole Diameter: 3 inches P/N Standard Base P/N Extended Base P/N Standard Base P/N Extended Base Swivel-Top Gin This gin has the same application as the Transformer Gin, but the top eye casting can be swiveled to bypass secondary lines when necessary. The cap is not intended to swivel while under load. Gins are not intended for applications involving side pull on the hoist line or with the lift load in a taggedout position. That is, the load line should be parallel to the gin pole. Wheel tightener and 36 chain is a part of each unit 2,000 lb. maximum rating, including hand pull force Pole Length: 48 inches P/N Call Toll Free 6

7 Anchor Tools Power-Installed Screw Anchor (PISA ) Tooling System (Installing Torques up to 10,000 ft.-lb.) Kelly Bar Adapters w/bent Arm Pin - have six 1/2 diameter holes on a 5 1/4 bolt circle and include six 1/2 bolts, nuts, lock washers and bent arm pin with coil lock. P/N Square, 2 1/2 P/N Hex, 2 1/2 P/N Hex, 2 P/N Hex, 2 5/8 Locking Dog Assembly - has six 1/2 holes on 5 1/4 bolt circle and includes six 1/2 grade 5 bolts, nuts and lock washers. P/N K - 1 1/2 Core Anchor Hybrid Drive-End Wrenches Installs PISA 6,000 & 7,000 and 8,000 ft.-lb. (large hub) Tough One Anchors. P/N P/N K - 1 3/8 Standard Core Anchor Drive-End Wrenches P/N P/N Drive End Wrench 7 Drive End Wrench Fits 1 3/8 core anchors. Installs 8,000 ft.-lb. (small hub) Tough One Anchors, 10,000 ft.-lb. (small hub) Tough One Anchors, Standard-Strength and Mid-Strength Anchors. 3.5 Drive End Wrench 7 Drive End Wrench Anchor Drive End Extension Screw Anchor Kit This kit includes the kelly bar adapter (P/N ), locking dog assembly (P/N ), and the 7-ft. drive-end wrench (P/N ). Extends Core Anchor Drive-End Wrenches an additional 3.5 or 7.0 with a 10,000 ft. lb. torque rating. P/N , 42 Lbs., 10,000 Ft Lbs.Torque Rating P/N , 71 Lbs., 10,000 Ft Lbs.Torque Rating P/N P/N Screw Anchor Kit 1 3/8 core anchor Screw Anchor Kit 2 5/8 core anchor These wrenches will fit 15,000 ft.-lb. Tough One Anchors dimensionally, but MUST NOT be used for torques in excess of 10,000 ft.-lb. 7

8 Anchor Tools, cont. Tough One Kelly Bar Adapter with Bent Arm Pin Kelly bar adapters have twelve 5/8 holes on a 7 5/8 bolt circle and includes 5/8 bolts, nuts and lock washers and bent arm pin with coil lock. P/N Hex, 2 1/2 P/N Hex, 2 5/8 Tough One Locking Dog Assembly The Locking Dog Assembly has twelve 5/8 holes on a 7 5/8 bolt circle and includes twelve 5/8 grade 2 bolts, nuts and lockwashers. P/N Tough One 15K - 1 1/2 Core Anchor Drive-End Wrenches Fits Tough One Anchors, 1 1/2 core anchors. Installs 6,000 Ft Lbs, 7,000 Ft Lbs, 8,000 Ft Lbs (small hub), and Tough One Anchors, 15,000 Ft Lbs. (Large Hub) P/N P/N Drive End Wrench 7 Drive End Wrench Foundation Anchor Installing Tool This tool is used for installing flange-drive foundations. The drive tool has six 1/2-13 tapped holes on a 5 1/4 bolt circle and requires a Kelly Bar Adapter (sold separately). Includes six 1/2 grade 5 bolts Approximate weight 10 lbs. P/N Bolt Circle Adapter These adapters are used to connect two tools having incompatable bolt circles. The P/N is for use between two tools having tapped 5 1/4 bolt cicles. The P/N is for use between a tool having a 5 1/4 bolt circle and one having a 7 5/8 bolt circle. Both are limited to 10,000 ft.-lb. P/N P/N Bolt Circle Adapter w/two 1/2 x 5 1/4 bolt circles Bolt Circle Adapter w/one 1/2 x 5 1/4 bolt circle and one 5/8 x 7 5/8 bolt circle. Anchor Installing Tool Pin These plated-steel bent arm pins are designed to attach a kelly bar adapter to a kelly bar. Also used to secure SS, RR, and bumper post anchors to achor drive tools. Bent arm pins are included with new tools as required. Tough One Anchor Drive End Extension P/N Pin fits P/N s & & Kelly Bar Adapter; 4 1/2 x 1/2 P/N Pin fits P/N Kelly Bar Adapter; 5 x 3/4 P/N Pin fits P/N fits SS/RR tool; 3 x 5/8 P/N Coil Lock Assembly, 5 x 5/8 P/N Coil Keeper Extends Core Anchor Drive-End Wrenches an additional 3.5 or 7.0 with a 15,000 ft. lb. torque rating. P/N , 50 Lbs., 15,000 Ft Lbs.Torque Rating P/N , 87 Lbs., 15,000 Ft Lbs.Torque Rating Adapter for Installing SS or RR Anchors This tool slides into the locking dog adapter and is retained by a spring loaded dog. Weighs approximately 8 lbs. P/N Call Toll Free 8

9 Anchor Tools, cont. 9

10 Torque Indicators Mechanical Torque Indicator This indicator is for installing torques up to 20,000 ft.-lb. It offers an easy-to-read dial-giving the operator a direct read out of installation torque at all times. No shear pins to replace Includes six 1/2-13 tapped holes on a 5 1/4 bolt circle and twelve 5/8-11 tapped holes on a 7 5/8 bolt circle, each end Shear Pin Torque Indicator This indicator is for installing torques up to 10,000 ft.-lb. It offers protection for anchors and installing tools by disconnecting the power source from drive tools. This indicator is durable and does not require special storage or handling. P/N P/N Torque Ratings Use Bolt Circle ( Ft.-Lb.) *0-10,000 (6) 1/2 on 5 1/4 B.C. *0-15,000 (6) 5/8 on 7 5/8 B.C. *0-20,000 (12) 5/8 on 7 5/8 B.C. Useable in very rocky soil Includes six 1/2-13 tapped holes on a 5 1/4 bolt circle, both ends *Do not exceed torque rating on tooling. Mechanical Torque Indicator is not recommended in heavy-rock soil applications. (Kelly Bar Adapter and Locking Dog Assembly not included with P/N ) Grounding Equipment Truck Grounding Set This set provides means to drain off capacitance or static charges from winch trucks and aerial devices. A flat face clamp is for secure attachment to the truck bed at an area cleaned for electrical contact. C-type clamp is for secure attachment to ground rod. This grounding method should not be considered adequate protection to personnel against conductor contact. Assembly Includes: Screw Ground Rod Flat Face Ground Clamp C-Type Ground Clamp #2 Copper Grounding Cable Shrouded Aluminum Ferrules Storage Reel P/N Truck Grounding Set Call Toll Free

11 Conductor Support Equipment The Epoxiglas extension arm is designed for use on voltages up to and including 15kV where reconduction or insulator replacement is necessary. The extension arm is suspended under the crossarm by brackets to enable the conductor to be removed from the original crossarm and placed in the wireholder mounted on the Epoxiglas extension arm. The corner restraint bracket tool helps control each phase conductor while insulators are changed. It also acts as a load restraint for the hoist to pull the conductor back in for reconnection to the insulator string. P/N Arm Diameter & Length: 2 1/2 x 5 1 Wireholder Maximum Cross arm Size: 3 3/4 x 4 3/4 Max. Vertical Loading per Wireholder: 150 lbs. P/N Arm Diameter & Length: 2 1/2 x 6 2 Wireholder Maximum Cross arm Size: 3 3/4 x 4 3/4 Max. Vertical Loading per Wireholder: 150 lbs. 2,000 lb. maximum load rating 2 1/2 diameter, 6 clear length P/N For 34.5 kv or when a tool is used to support an energized conductor overnight or during periods of expected rain these insulators should be added to the wireholders. P/N Temporary Conductor Supports These Epoxiglas temporary conductor supports are used to hold energized distribution conductors during replacement of poles or repair or replacement of pole top and stand-off insulators; they are furnished with wheel tightener for poles up to 14 in diameter. Working load is 150 lbs. per wireholder. P/N Single Conductor Support P/N Two Conductor Supports

12 Contact your nearest Altec location for assistance with all part and accessory needs.

Powered Hoists. Catalog 1150 July Hoists - Powered Phone: Web: hubbellpowersystems.

Powered Hoists. Catalog 1150 July Hoists - Powered Phone: Web: hubbellpowersystems. Powered Hoists Catalog 1150 Page 1151 1,000-lb. & 3,000-lb. Load Ratings 12V, 115V, 230V, Hydraulic, Gasoline Powerful design for tough jobs. Improved design features a multiple-planetary drive/backstop

More information

Mechanical Hoists. Catalog 1100 July Hoists - Mechanical Phone: Web: hubbellpowersystems.

Mechanical Hoists. Catalog 1100 July Hoists - Mechanical Phone: Web: hubbellpowersystems. Mechanical Hoists Catalog 1100 Page 1101 RATCHET HOISTS User-friendly operation and construction. Experienced operators prefer CHANCE lever hoists for longterm, dependable performance. Light-weight for

More information

Mechanical Hoists. NOTICE: For latest revision of our Catalog and Literature, please visit our web site:

Mechanical Hoists. NOTICE: For latest revision of our Catalog and Literature, please visit our web site: Section 1101 1100 Mechanical Hoists Warranty - Material Hubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be

More information

Anchor Tools. Catalog 4A December Phone: Web: hubbellpowersystems.com December 2014.

Anchor Tools. Catalog 4A December Phone: Web: hubbellpowersystems.com December 2014. Anchor Tools Catalog 4A Page 4A-1 Page 4A-3 4A-4 4A-5 4A-6 4A-7 4A-8 4A-9 4A-10 4A-11 4A-12 4A-13 4A-14 4A-15 TABLE OF CONTENTS Subject How to match Chance PISA Anchors with Installing Wrenches PISA Drive

More information

STRAIN LINK STICK ROLLER LINK STICK ADJUSTABLE STRAIN POLES SPIRAL LINK STICK TRANSMISSION TOOLS

STRAIN LINK STICK ROLLER LINK STICK ADJUSTABLE STRAIN POLES SPIRAL LINK STICK TRANSMISSION TOOLS 172 Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com STRAIN LINK STICK Used as insulation between rope blocks and a hot line wire grip For deadend structures and running corners Attached to conductor

More information

Convertible - Rated 3 4-Ton /2-Ton Nylon Strap Hoists Refer to any questions about the use, application, repair or testing of this hoist to:

Convertible - Rated 3 4-Ton /2-Ton Nylon Strap Hoists Refer to any questions about the use, application, repair or testing of this hoist to: Operating and Servicing Instructions for Convertible - Rated 3 4-Ton - 1 1 /2-Ton Nylon Strap Hoists Refer to any questions about the use, application, repair or testing of this hoist to: Hubbell / Chance

More information

MINING PRODUCTS FOR HOISTS & RIGGING. Manual Hoists. Chain & Rigging Attachments. Specialized Attachments. Liner Bolts. for THE MINING INDUSTRY

MINING PRODUCTS FOR HOISTS & RIGGING. Manual Hoists. Chain & Rigging Attachments. Specialized Attachments. Liner Bolts. for THE MINING INDUSTRY A Complete Line of Products & Solutions for THE MINING INDUSTRY HOISTS & RIGGING PRODUCTS FOR MINING Manual Hoists Chain & Rigging Attachments Specialized Attachments Liner Bolts Columbus McKinnon Family

More information

CHANCE NEW ADDITIONS

CHANCE NEW ADDITIONS CHANCE NEW ADDITIONS h u b b e l l p o w e r s y s t e m s. c o m CHANCE 2017 NEW ADDITIONS ABS Pole Covers Added January 2017 In-line Rubber Blanket Clamp Added June 2017 ASTM 5H and 6H Rated Cluster

More information

Transmission Tools. Catalog 2250 May Transmission Tools Phone: Web: hubbellpowersystems.

Transmission Tools. Catalog 2250 May Transmission Tools Phone: Web: hubbellpowersystems. Transmission Tools Catalog 2250 May 2016 Transmission Tools 2250 May 2016 Page 2251 STRAIN LINK STICK Tested per OSHA & ASTM F711 Used as insulation between rope blocks and a hot line wire grip For deadend

More information

B L A C K R AT 4 W D 11

B L A C K R AT 4 W D 11 11 Recreational 4 wheel driving should be challenging and enjoyable and for the professional it can be a necessity to get across some wild and difficult terrain, so when you get into a jam you need to

More information

TRANSPORT & 4WD EQUIPMENT

TRANSPORT & 4WD EQUIPMENT 6 TRANSPORT & 4WD EQUIPMENT TIRFOR WIRE ROPE WINCHES...133 LOAD CHOKER LOAD RESTRAINTS...134 SYNTHETIC TOW SLINGS...134 TRANSPORT CHAIN & FITTINGS...135 LOAD RESTRAINT KITS...135 RATCHET LOAD BINDERS...135

More information

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70 Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile

More information

Jumpers & Load Pickup Tools

Jumpers & Load Pickup Tools Jumpers & Load Pickup Tools Catalog 2300 May 2016 Jumpers & Load Pickup Tools 2300 May 2016 Page 2301 All Chance Insulated Jumpers meet ASTM F 2321 Standard Specification. G4758 15kV 5 5 / 8 " G4765 25kV

More information

77 Ton Tele-Boom Crawler Crane. mantiscranes.com

77 Ton Tele-Boom Crawler Crane. mantiscranes.com 15010 77 Ton Tele-Boom Crawler Crane mantiscranes.com VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel

More information

BRENCO. Aerial Tools & Equipment

BRENCO. Aerial Tools & Equipment BRENCO 81 C2 Cable Lasher For cables or cable bundles up to 1.87 in. (4.7 cm) on strands 1/4 in. to 3/8 in. Positive mechanical brake prevents lasher back-up until brake is released. Built to last, the

More information

Lineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips

Lineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips Lineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips Extra Measure of Reliability Fiberglass Handle and Polyester Webbing Provides added nonconductive material when using proper hot line handling

More information

Felco Industries, Ltd Grant Creek Road P.O. Box Missoula, Montana (406) Fax (406)

Felco Industries, Ltd Grant Creek Road P.O. Box Missoula, Montana (406) Fax (406) Bedding Conveyor - Model 60 Serial Number Bedding Conveyor Patent Number: 4,462,747 Felco Industries, Ltd. 3660 Grant Creek Road P.O. Box 16750 Missoula, Montana 59808-6750 (406) 728-9103 1-800-221-5427

More information

POLE HANDLING TONGS, PIKES & CANT HOOKS

POLE HANDLING TONGS, PIKES & CANT HOOKS 40218 Lifting Tong LIFTING (RATED FOR LIFTING) & SKIDDING TONGS (NOT FOR LIFTING) Made of round high carbon steel and have heavy upset, hammer-forged points or hooks. The sides are flattened evenly where

More information

Felco Industries, Ltd Grant Creek Road P O Box Missoula, Montana (406) Fax (406)

Felco Industries, Ltd Grant Creek Road P O Box Missoula, Montana (406) Fax (406) Standard Slider Bedding Conveyor Model Number: STD 10-20 Serial Number: Bedding Conveyor Patent Number: 4,462,747 Felco Industries, Ltd. 3660 Grant Creek Road P O Box 16750 Missoula, Montana 59808-6750

More information

Custom Sizing Available

Custom Sizing Available wheel bonnets ratchet & direct snap P/N 80399-7G-32 P/N 80399-7C-32 TWIST SNAP HOOK FLAT HOOK REPLACEMENT BONNET TOP P/N 80099-7G-32 P/N 80099-7C-32 TWIST SNAP HOOK FLAT HOOK auto tie-down straps M&R Auto

More information

Shipping Systems Division

Shipping Systems Division Shipping Systems Division Keeping you and your load secure is our job! We do this by manufacturing a blend of field-proven products to developing some of the industry s most innovative new systems for

More information

ARTICULATING WORK STATION JIB CRANES

ARTICULATING WORK STATION JIB CRANES ARTICULATING WORK STATION JIB CRANES CAPACITIES: SPANS: APPLICATIONS: Up to 2000 lbs Up to 16' Reaching around or under obstructions Reaching through doorways Articulating Jib Cranes Versatile enough to

More information

model PROVISIONAL product guide features contents 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment

model PROVISIONAL product guide features contents 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment features 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment 89 m (292') Heavy-Lift Boom 98,4 m (323') Fixed Jib on Heavy-Lift Boom 113,8 m (373') Luffing Jib on Heavy-Lift Boom 253

More information

JACKS & LIFTS JACKS & LIFTS BOTTLE JACKS JACK STANDS JACKS & LIFTS JACK PACKS JACKS & LIFTS UNDER HOIST STANDS. Bottle Jacks - Stands

JACKS & LIFTS JACKS & LIFTS BOTTLE JACKS JACK STANDS JACKS & LIFTS JACK PACKS JACKS & LIFTS UNDER HOIST STANDS. Bottle Jacks - Stands BOTTLE JACKS TEQ Correct Professional 12 Ton Short Professional Bottle Jack EQP 3113 JACK STANDS Low Height: 12 3/16" Raised Height: 18 7/8" TEQ Correct Professional 3 Ton Ratcheting Professional Series

More information

HOISTS RATCHET LEVER HOISTS

HOISTS RATCHET LEVER HOISTS Yale HOISTS RATCHET LEVER HOISTS Yale PE & RS Ratchet Lever Hoist / to ton capacities Link chain models Light and portable Weatherized load brake Requires less handle pull to lift full load Efficient Yale

More information

P Series Puller 1000 and 2000 lb Capacity

P Series Puller 1000 and 2000 lb Capacity P Series Puller 1000 and 2000 lb Capacity Features / Wire Puller: 4:1 design factor. Meets SM 30.21. Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. ll steel parts

More information

Lincoln Hoist. Web Hoist Operating Manual. Lincoln Hoist

Lincoln Hoist. Web Hoist Operating Manual. Lincoln Hoist Lincoln Hoist Web Hoist Operating Manual Lincoln Hoist Mfg. by Lincoln Precision Machining Company 121 Creeper Hill Road, P.O. Box 458, North Grafton, MA 01536 USA Toll Free (888) 306-7222 Phone (774)

More information

Fax Pac. Faxable Information Little Mule Products LMFP-1

Fax Pac. Faxable Information Little Mule Products LMFP-1 LMFP-1 Fax Pac Faxable Information Little Mule Products Publications LMC-2 and LMU-3 Cable Lineman s Strap Ratchet Lever Hand Chain Electric Chain Hoists Wire Grips Trolleys Beam Clamps Accessories Extra

More information

Coffing Hoists Series 2000 Hoists. Hook to Hook (Min.) (In.) Hook to Hook (Min.) (In.) Capacity (Lbs.) Lift (Ft.)

Coffing Hoists Series 2000 Hoists. Hook to Hook (Min.) (In.) Hook to Hook (Min.) (In.) Capacity (Lbs.) Lift (Ft.) Hook () Coffing Series 2000 Hook () Web Strap 2000A 0 11 17 1/2 2000 5 22 12 20 13 1/4 2000DA 0 11 17 1/2 2000 5 22 12 20 13 1/4 2000CA 0 11 20 1/2 2000 5 26 1/2 12 20 13 1/4 200DHA 0 11 19 1/2 2000 5

More information

TELESCOPIC BOOM CRAWLER CRANE 30 TON CAPACITY

TELESCOPIC BOOM CRAWLER CRANE 30 TON CAPACITY TELESCOPIC BOOM CRAWLER CRANE 6010 30 TON CAPACITY OPTIONAL EQUIPMENT ACCESS WALKWAYS VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive

More information

Winches & Capstans. Air Electric Custom

Winches & Capstans. Air Electric Custom Winches & Capstans Air Electric Custom Engineered Winches 203Series High-performance engineered winches meet demanding application requirements. Unlimited Capability Each 203 Series winch is specifically

More information

TELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY

TELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY TELESCOPIC BOOM CRAWLER CRANE 9010 45 TON CAPACITY VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel

More information

HYDRAULIC CRAWLER CRANE CK2500

HYDRAULIC CRAWLER CRANE CK2500 HYDRAULIC CRAWLER CRANE CK2500 WITH OPTIONAL JIB Max. Lifting Capacity: 250 US Tons Max. Boom Length: 300 ft Max. Boom + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500 CRAWLER CRANE The Kobelco

More information

Services. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains

Services. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains RENTAL DIVISION PRODUCT LINES In a continuing effort to give the customer the opportunity to get an assortment of equipment, services and products from one supplier, our rental division was established

More information

Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary

Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary 14B-2 Type M3 Hookstick Disconnect Switches Up to 38kV 0 or 900 Amp 40kA Momentary Application The Chance Type M3 Disconnect Switch is a single-phase hookstick operated switch. It is for manual switching

More information

Distributed by Tri-State Equipment Company Inc

Distributed by Tri-State Equipment Company Inc Distributed by Tri-State Equipment Company Inc. sales@tsoverheadcrane.com 314-869-7200 www.tsoverheadcrane.com Harrington Manual hoist products CB Hand Chain Hoist 1 2 through 100 Ton capacity Harrington

More information

Disconnect & ByPass Switches

Disconnect & ByPass Switches Disconnect & ByPass Switches Disconnect & Oil Circuit Recloser Bypass Switches; Regulator & Current Transformer Bypass Switches Electrical Apparatus K-SEC 060 & 090 Contents Type D-73 Distribution Class

More information

Ton Telescopic Boom Crawler Crane

Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 77 ton at 10 feet (70t at 3.0m) 4-section, 37 6 111 6 (11.4 m 34.0 m) DIMENSION Overall Length 48 3 (14.94 m) Overall Width (tracks extended) 18 8 (5.69 m) Overall Width

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE consolidatedcrane.com Houston, TX 713.641.3330 Max. Lift Capacity: 500,000 lbs Max. Length: 300 ft Max. + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500-II CRAWLER CRANE

More information

WORK STATION JIB CRANES CAPACITIES: TRACKS: PRODUCTIVITY: Up to 2000 lbs Steel, Aluminum & Stainless Steel Average 28% increase

WORK STATION JIB CRANES CAPACITIES: TRACKS: PRODUCTIVITY: Up to 2000 lbs Steel, Aluminum & Stainless Steel Average 28% increase WORK STATION JIB CRANES CAPACITIES: TRACKS: PRODUCTIVITY: Up to 2000 lbs Steel, Aluminum & Stainless Steel Average 28% increase Work Station Jib Cranes Versatile enough to perform a wide variety of local

More information

WORK STATION JIB CRANES CAPACITIES: TRACKS: PRODUCTIVITY: Up to 2000 lbs Steel, Aluminum & Stainless Steel Average 28% increase

WORK STATION JIB CRANES CAPACITIES: TRACKS: PRODUCTIVITY: Up to 2000 lbs Steel, Aluminum & Stainless Steel Average 28% increase WORK STATION JIB CRANES CAPACITIES: TRACKS: PRODUCTIVITY: Up to 2000 lbs Steel, Aluminum & Stainless Steel Average 28% increase Optional Accessories Festoon Clamps Festoon clamps anchor the festooning

More information

ISO9001 ISO14001 A3 FEM 1.001

ISO9001 ISO14001 A3 FEM 1.001 ISO9001 ISO14001 A3 FEM 1.001 High-performance, precise-control, very-reliable, energy-saving drive system Frequency-converter Hoist Drive system Most - reliable German made hoist drive system consists

More information

Distributed by Tri-State Equipment Company Inc

Distributed by Tri-State Equipment Company Inc COFFING LHH Models - Stamped steel hand chain hoists are an excellent low cost option in the Coffing line. The compact, lightweight design is ideal for construction and contractor applications where portability

More information

HORIZONTAL SYSTEMS SOME SAY WE OVER-ENGINEER LIFELINES. WE SAY YOU CAN T OVER-DO SAFETY.

HORIZONTAL SYSTEMS SOME SAY WE OVER-ENGINEER LIFELINES. WE SAY YOU CAN T OVER-DO SAFETY. SOME SAY WE OVER-ENGINEER LIFELINES. WE SAY YOU CAN T OVER-DO SAFETY. 90 You can always depend on our horizontal safety systems for mobility and fall protection when working at height. That s why safety

More information

Please make your selections below to view, search or print ACCO Material Handling Solutions WRIGHT SPEEDWAY and WRIGHT WORK-RATED product pages.

Please make your selections below to view, search or print ACCO Material Handling Solutions WRIGHT SPEEDWAY and WRIGHT WORK-RATED product pages. Contact Information Welcome! Please make your selections below to view, search or print ACCO Material Handling Solutions WRIGHT SPEEDWAY and WRIGHT WORK-RATED product pages. 1T to 5T THE NEW CENTURY SERIES

More information

Flexiguard Solutions. Unique solutions needs

Flexiguard Solutions. Unique solutions needs Flexiguard Solutions Unique solutions for unique needs THE ULTIMATE IN FALL PROTECTION Product Catalog Fall Protection You Can Trust Flexiguard is designed to meet the requirements of your specific application

More information

Force Control Switches

Force Control Switches Force Control Switches Simple and ultra-reliable passive sensors provide switch contacts that open or close at your specified loads. Overload protection Slack-line detection Up to four switches on a single

More information

BRACKETS, MOUNTS & HARDWARE

BRACKETS, MOUNTS & HARDWARE HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,

More information

CHAIN PRODUCTS FOR ALL-MAKES AGRICULTURAL AND CONSTRUCTION EQUIPMENT INDUSTRIAL HEAVY-DUTY FARM & AGRICULTURAL EQUIPMENT

CHAIN PRODUCTS FOR ALL-MAKES AGRICULTURAL AND CONSTRUCTION EQUIPMENT INDUSTRIAL HEAVY-DUTY FARM & AGRICULTURAL EQUIPMENT CHAIN PRODUCTS FOR ALL-MAKES AGRICULTURAL AND CONSTRUCTION EQUIPMENT INDUSTRIAL HEAVY-DUTY FARM & AGRICULTURAL EQUIPMENT CHAIN SPECIFICATIONS Table of Contents Chain Specifications Industrial Chain Proof

More information

TENSIONERS SPEED SIMPLE LOAD TO USE ACCURATE TENSIONER OPERATION DAMAGE. torqlite.com HYDRAULIC TENSIONER INTRO

TENSIONERS SPEED SIMPLE LOAD TO USE ACCURATE TENSIONER OPERATION DAMAGE. torqlite.com HYDRAULIC TENSIONER INTRO TENSIONERS HYDRAULIC TENSIONER INTRO SPEED SIMPLE TO USE ACCURATE LOAD TENSIONER OPERATION NO DAMAGE Hydraulic bolt tensioning provides a quick and easy method for tightening large diameter bolts to high

More information

Contents SPANSET XTIRPA CONFINED SPACE FALL ARREST AND RESCUE SYSTEMS

Contents SPANSET XTIRPA CONFINED SPACE FALL ARREST AND RESCUE SYSTEMS Contents of the SpanSet Xtirpa System 4 6-9 10-15 16-17 Fixed Davit Systems 18-23 Low Clearance Integrated Masr and Davit Arm 18 600mm Davit Mast and Base Kit 18-19 1200mm Davit Mast and Base Kit 20-21

More information

WARNING WARNING CAUTION. Warnings and Cautions MOVING PARTS ENTANGLEMENT HAZARD MOVING PARTS ENTANGLEMENT HAZARD CHEMICAL AND FIRE HAZARD

WARNING WARNING CAUTION. Warnings and Cautions MOVING PARTS ENTANGLEMENT HAZARD MOVING PARTS ENTANGLEMENT HAZARD CHEMICAL AND FIRE HAZARD Warnings and Cautions As you read these instructions, you will see S, S, NOTICES and NOTES. Each message has a specific purpose. S are safety messages that indicate a potentially hazardous situation, which,

More information

TECHNICAL MANUAL OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TECHNICAL MANUAL OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL TECHNICAL MANUAL OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL LANDING CRAFT UTILITY LCU 1667-1670 NSN 1905-00-168-5764 OPERATOR/CREW BOW RAMP AND ANCHOR HANDLING SYSTEM

More information

Overhead Products. Overhead Products Introduction. Model Q Lasher. Eagle Lasher Series Series

Overhead Products. Overhead Products Introduction. Model Q Lasher. Eagle Lasher Series Series Introduction In 2006, DCD Design took on the Spinning Equipment Company and began producing the Lineman and Eagle cable lashers. In doing so, DCD took on a long history of quality and innovation. These

More information

Operation and Maintenance Manual

Operation and Maintenance Manual Operation and Maintenance Manual Lineman s Hoist Models 250A 300A 250DA 300DA PUBLICATION PART NO. LM931A IMPORTANT! CAUTION This manual contains important information for the correct installation, operation

More information

CONTENTS ////////////////////////////////////////////////////////////////////////////////////////

CONTENTS //////////////////////////////////////////////////////////////////////////////////////// TC450 SERIES TELESCOPIC CRANE CONTENTS //////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Chassis Data... 5 Outrigger Extension... 6 Sub Frame...6

More information

30105F-D TECHNICAL SPECIFICATIONS 30105F-D SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height

30105F-D TECHNICAL SPECIFICATIONS 30105F-D SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height 30105F-D 30105F-D SIDE VIEW DIAGRAM Maximum Vertical Reach 162'/49 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 60,000 lbs/27 216 kg Boom Length 105 /32 m Crane Weight (Standard)

More information

Cable ratchet winch hoists

Cable ratchet winch hoists The Original Lever Ratchet Hoist Company Made in the USA ratchet winch hoists Hoist Configurations 1. Double line lift. Single line lift, straight lift LUG-ALL Corporation is a super-niche, USA manufacturer

More information

Overhead Crane Specification prepared by SVEDA CRANES SPECIFICATION. * (Top/Under) running * (single/double) girder crane

Overhead Crane Specification prepared by SVEDA CRANES SPECIFICATION. * (Top/Under) running * (single/double) girder crane SPECIFICATION * (Top/Under) running * (single/double) girder crane 1. SCOPE Crane vendor to provide a complete *-ton capacity * running * girder crane 2. REFERENCE DRAWING (Drawing number and description)

More information

JUMPERS & SWITCHING TOOLS

JUMPERS & SWITCHING TOOLS INSULATED JUMPER SETS 368 INSULATED JUMPER SETS FOR 15 KV, 25KV AND 35 KV Used for bypassing work areas when upgrading lines and when making temporary or emergency repairs Continuous-current ratings for

More information

STORAGE & MATERIAL HANDLING

STORAGE & MATERIAL HANDLING www.greenlee.com STORAGE & MATERIAL HANDLING Contractors the world over rely on Greenlee storage and material handling solutions to keep product safe. From small chests to large field offices, and now

More information

Max. Lifting Capacity: 100 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 190 ft + 60 ft

Max. Lifting Capacity: 100 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 190 ft + 60 ft HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 100 US Tons Max. Length: 200 ft Max. + Jib Length: 190 ft + 60 ft SPECIFICATIONS FOR CK1000-III CRAWLER CRANE The Kobelco CK1000-III Crawler Crane is designed

More information

Jib Cranes. Solutions for compact workstations. Ingersoll Rand offers:

Jib Cranes. Solutions for compact workstations. Ingersoll Rand offers: 12 Jib Cranes Solutions for compact workstations Ingersoll Rand offers: 220 or 360 rotation Floor or wall mount Standard or low profile Capacities to 2,000 lb 13 Floor-mounted Jib Crane The Ingersoll Rand

More information

FOLD-A-WAY BUMPER CRANES

FOLD-A-WAY BUMPER CRANES FOLD-A-WAY BUMPER CRANES ATERIAL HANDLING SOLUTIONS SINCE 1982 Much More Than Just A Crane! CRANE HITCH WINCH BUMPER MAN-LIFT WESTERN MULE CRANES HELPING YOU GET THE JOB DONE NOW YOU SEE IT... SINCE 1982

More information

FREE STANDING WORK STATION JIB CRANE

FREE STANDING WORK STATION JIB CRANE SECTION 14661 FREE STANDING WORK STATION JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and

More information

Tie Downs and Heavy Haul Equipment

Tie Downs and Heavy Haul Equipment Tie Downs and Heavy Haul Equipment Binder Chains Load Binders Web Straps Winches & Winch Bars Roll-Off s Winch Lines Crane & Wrecker Outrigger Pads Snatch Blocks SkyBlock ASSOCIA TED BUILDERS AND CONTRA

More information

CM170 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7

More information

P Series Puller 1000 and 2000 lb Capacity

P Series Puller 1000 and 2000 lb Capacity P Series Puller 1000 and 2000 lb apacity eatures / Wire Puller: 4:1 design factor. Meets SM 30.21. Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. ll steel parts

More information

CRANE TESTING REQUIREMENTS FOR PERFORMANCE TESTS

CRANE TESTING REQUIREMENTS FOR PERFORMANCE TESTS APPENDIX I CRANE TESTING REQUIREMENTS FOR PERFORMANCE TESTS 1. PERFORMANCE TESTING. a. Performance testing includes both operational performance testing and load performance testing. The following tables

More information

Roll Grooving ROLL GROOVING. Pipe Capacity. No. of Models. Type. Page

Roll Grooving ROLL GROOVING. Pipe Capacity. No. of Models. Type. Page Roll Grooving Designed to improve speed and efficiency for fire sprinkler and other industrial installations. Wide selection of mechanical and hydraulic units for applications up to 24" in diameter. Type

More information

Yale HOISTS. 414 West Broadway Ave. P.O. Box 769 Muskegon, MI PH: FX:

Yale HOISTS. 414 West Broadway Ave. P.O. Box 769 Muskegon, MI PH: FX: Yale HOISTS! To Avoid Injury: Do not exceed working load limit, load rating, or capacity. Do not use to lift people or loads over people. Read and follow all instructions. 44 West Broadway Ave. P.O. Box

More information

Panduit.com

Panduit.com Cones Barriers & Barricades 1 Cone Top Warning Signs Cones Temporarily and quickly direct facility traffic. Slips into top of any standard, flexible traffic cone Rugged, 0.060" plastic Same message both

More information

CZ Engineering, Inc. Pole Trailers The World's Safest Pole Trailers. CZ12KP & CZ15KP Retracted CZ12KP & CZ15KP Extended CZ30KP Retracted

CZ Engineering, Inc. Pole Trailers The World's Safest Pole Trailers. CZ12KP & CZ15KP Retracted CZ12KP & CZ15KP Extended CZ30KP Retracted CZ Engineering, Inc. Craftsmanship and Innovation Pole Trailers The World's Safest Pole Trailers. CZ12KP & CZ15KP Retracted CZ12KP & CZ15KP Extended CZ30KP Retracted Manufactured by: CZ Engineering, Inc.

More information

IC-20-G. Engineering Spec. View thousands of Crane Specifications on FreeCraneSpecs.com. Page 1 of 7 Date: June 2006

IC-20-G. Engineering Spec. View thousands of Crane Specifications on FreeCraneSpecs.com. Page 1 of 7 Date: June 2006 Engineering Spec IC-20-G Page 1 of 7 Replaces: Form BD104G Dated: May 2004 The IC-20-1G is a self-propelled industrial crane designed for in-plant lifting and material handling applications. It is powered

More information

Ladders & Platforms. NOTICE: For latest revision of our Catalog and Literature, please visit our web site:

Ladders & Platforms. NOTICE: For latest revision of our Catalog and Literature, please visit our web site: Section 350 35 Ladders & Platforms Warranty - Material Hubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be

More information

85-TON POWER SWIVELS. Gooseneck Trailer-Mounted Unit, side view

85-TON POWER SWIVELS. Gooseneck Trailer-Mounted Unit, side view Overview The hydraulic motor-driven, Logan 85-Ton Power Swivel provides smooth, shock-free torque. It is rated to support tensile pipe loads of 85 tons at zero rpm and 45 tons of dynamic load at 100 rpm.

More information

40142R TECHNICAL SPECIFICATIONS 40142R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height. 210'/64 m Working Area

40142R TECHNICAL SPECIFICATIONS 40142R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height. 210'/64 m Working Area 40142R 40142R SIDE VIEW DIAGRAM Maximum Vertical Reach 210'/64 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 41,700 lbs/18 915 kg Jib

More information

recognized as the best in the industry for over 115 years. Each component is designed with greater innovation and manufactured with higher

recognized as the best in the industry for over 115 years. Each component is designed with greater innovation and manufactured with higher 0-0_q_K //0 : PM Page C R A N E C O M P O N E N T S TM TM THERE S A CRANE SOURCE COMPONENT FOR EVERY JOB. CraneSource crane bridge components have been recognized as the best in the industry for over years.

More information

Choose the Specified Leader in Utility Products... Little Mule

Choose the Specified Leader in Utility Products... Little Mule Choose the Specified Leader in Utility Products... Little Mule Request the Lineman s Products Catalog Featuring Strap Hoists, Link or Roller Chain Lever Hoists, Wire Grips, and Cable Pullers. Ask For Publication:

More information

Series LS16K Hydraulic Cable Winches

Series LS16K Hydraulic Cable Winches Series LS16K Hydraulic Cable Winches Lift-Safe hydraulic winches are specifically designed for lifting applications and optimum load control. Engineered for enhanced safety with redundant braking systems,

More information

SPECIFICATIONS FOR TRUCK EQUIPPED WITH AERIAL LIFT AND SERVICE BODY Pennsylvania Department of Military and Veteran Affairs

SPECIFICATIONS FOR TRUCK EQUIPPED WITH AERIAL LIFT AND SERVICE BODY Pennsylvania Department of Military and Veteran Affairs Page 1 of 5 SPECIFICATIONS FOR TRUCK EQUIPPED WITH AERIAL LIFT AND SERVICE BODY Pennsylvania Department of Military and Veteran Affairs Insulated Telescopic Articulating type aerial lift with the following

More information

PART NUMBER POLE DIAMETER RANGE CARTON QTY " to 5" " to 6 3 4" " to 7 3 4" " to 8 3 4" 10

PART NUMBER POLE DIAMETER RANGE CARTON QTY  to 5  to 6 3 4  to 7 3 4  to 8 3 4 10 PH1 Offset Pole Band Bands Single Double Offset Pole Bands are used for dead-ending, guying, and mounting secondary racks on metal poles, pipe masts, or conduit. Each Pole Band Assembly contains two 1

More information

CHANCE HOIST INSTRUCTION MANUAL

CHANCE HOIST INSTRUCTION MANUAL CHANCE HOIST INSTRUCTION MANUAL OPERATING & SERVICING THE CHANCE ONE-TON CHAIN HOIST INDEX GENERAL SPECIFICATIONS... 2 OPERATING INSTRUCTIONS... 3 PARTS LIST... 4 EXPLODED VIEW... 4 DISASSEMBLY INSTRUCTIONS...

More information

a. Air & hydraulic operated winches b. Manual operated winches c. Electric operated winches

a. Air & hydraulic operated winches b. Manual operated winches c. Electric operated winches 3. Winches a. Air & hydraulic operated winches b. Manual operated winches c. Electric operated winches 23 Ingersoll Rand winches Air or hydraulic operated winches. Suitable for EX environment. Product

More information

The Right Tool for Your Tough Job

The Right Tool for Your Tough Job SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications

More information

View thousands of Crane Specifications on FreeCraneSpecs.com

View thousands of Crane Specifications on FreeCraneSpecs.com 40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 201'/61.3 m 360 Degrees 80,000 lbs/36,287 kg 142

More information

10010Mx 50 Ton Telescopic Boom Crawler Crane

10010Mx 50 Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 50 ton at 10 feet (45t at 3.0m) 4-section, 37 6 111 6 (11.4 m 34 m) DIMENSION Overall Length 47 4 (14.43 m) Overall Width (tracks extended) 18 4 (5.59 m) Overall Width

More information

MANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING

MANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING MANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING CARE & SAFETY INSTRUCTIONS 114 CX & M3 SERIES CHAIN BLOCKS 115-117 C SERIES CHAIN BLOCKS 118 MINI II CHAIN BLOCKS 118 LX & L5 SERIES CHAIN BLOCKS

More information

The Right Tool for Your Tough Job

The Right Tool for Your Tough Job The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications MCH-3S/4S Cutting

More information

KEY. Hook block. Operator aids. Distance from hook to head sheave pin. Cab. Hook and ball. Heating / Air conditioning. Hydraulics.

KEY. Hook block. Operator aids. Distance from hook to head sheave pin. Cab. Hook and ball. Heating / Air conditioning. Hydraulics. KEY /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Operator aids Hook block Cab Distance from hook to head sheave pin Heating / Air conditioning

More information

TADANO MODEL TM TON CAPACITY

TADANO MODEL TM TON CAPACITY LIFTING CHARTS - Trucks TADANO MODEL TM-35100-35 TON CAPACITY WORKING RANGE 25 45 5 160ʼ 150ʼ 140ʼ 79.5 7 6 100ft + 28.2ʼ jib 100ft + 50.0ʼ jib 5 45 4 35 3 86.2ft 100ft 130ʼ 120ʼ 110ʼ 100ʼ 90ʼ 80ʼ 70ʼ

More information

Part Numbers for Brake Coils, Brake Assemblies, Rotors, Stators and Attaching Screws JJ-2, LL-2, RR-2, AND RRT-2. AA-2, C-2, F-2 and H-2

Part Numbers for Brake Coils, Brake Assemblies, Rotors, Stators and Attaching Screws JJ-2, LL-2, RR-2, AND RRT-2. AA-2, C-2, F-2 and H-2 5 627-250 627-259 627-30 627-43 627-45 Part Name Electric Brake Assembly - Complete Brake Coil Drive Shaft & Pinion S/A (items 627-3 thru 627-35, as applicable) Rotor & Shaft Assembly Stator 0--50 5--60

More information

6010LP 30 Ton Telescopic Boom Crawler Crane

6010LP 30 Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 30 ton at 10 feet (27t at 3.0m) 3-section, 32 8 80 0 (9.9 m 24.4 m) DIMENSION Overall Length 41 1 (12.52 m) Overall Width (tracks extended) 13 6 (4.12 m) Overall Width

More information

Mechanical Truck Crane 6350-TC

Mechanical Truck Crane 6350-TC Mechanical Truck Crane 6350-TC 47 1. GENERAL Type: Truck mounted, fully revolving Max. lifting capacity: 210,000 kg (21.34 m heavy duty boom, at operating radius 7.0 m) Working weight: Approx. 246 metric

More information

Design standards used : CMAA, CSA, AIST, AISE, OSHA, FEM, HMI, CWB, AWS, ANSI, ASME, ASTM, AGMA, NEC, NEMA, IEEE, UL, ISO

Design standards used : CMAA, CSA, AIST, AISE, OSHA, FEM, HMI, CWB, AWS, ANSI, ASME, ASTM, AGMA, NEC, NEMA, IEEE, UL, ISO Through innovation and cutting-edge technology, provide sound engineering solutions while improving equipment efficiency, reliability, and safety. Achieve the highest level of customer satisfaction throughout

More information

SNER Electric Chain Hoists With Hook and Lug Suspensions and Motorized, Push and Geared Trolleys

SNER Electric Chain Hoists With Hook and Lug Suspensions and Motorized, Push and Geared Trolleys SNER Electric Chain Hoists With Hook and Lug Suspensions and Motorized, Push and Geared Trolleys Our SNER Series of electric chain hoists furnishes single-phase operation in a heavy-duty, low-headroom

More information

D-25 Drill Rig. 700 Hicks Drive, Elburn, IL Phone:

D-25 Drill Rig. 700 Hicks Drive, Elburn, IL Phone: Power Source: Gasoline or Diesel Engine Maximum Gross Spindle Torque: 2320 ft. lbs. (3145 Nm) to 3066 ft. lbs. (4156 Nm) Spindle Bore: 2-3/8 (60mm) Spindle Travel: 66 (1,676mm) Spindle & Retract Force

More information

Cable and Hose Reels / Balancer Program 0402

Cable and Hose Reels / Balancer Program 0402 Cable and Hose Reels / Balancer Program 0402 Contents Spring Operated Cable Reels Cable Reel....5 Barrier Rope Reel....7 Spring Operated Hose Reels Hose Reel enclosed design....9 Hose Balancer....10 Installation

More information

WARNING WARNING WARNING. Warnings and Cautions MOVING PARTS ENTANGLEMENT HAZARD CHEMICAL AND FIRE HAZARD FALLING OR CRUSHING HAZARD

WARNING WARNING WARNING. Warnings and Cautions MOVING PARTS ENTANGLEMENT HAZARD CHEMICAL AND FIRE HAZARD FALLING OR CRUSHING HAZARD Warnings and Cautions As you read these instructions, you will see S, S, NOTICES and NOTES. Each message has a specific purpose. S are safety messages that indicate a potentially hazardous situation, which,

More information

POWER WINCHES 4HPF SERIES

POWER WINCHES 4HPF SERIES 4HPF SERIES Thern 4HPF series power winches feature helical/parallel, high efficiency gearing making them ideal for applications requiring long travel distances and faster line speeds. The enclosed, direct-drive

More information