Efficient automation. Order T. +49 (0) for an efficient flow of material and information

Transcription

1 Publication date 12/2012. Subject to technical modification at our products regarding material, construction as well as dimensioning without notice. S T O P a n d G O Order T. +49 (0) info@asutec.eu Efficient automation ASUTEC component technology for an efficient flow of material and information Asutec GmbH Küferstr. 11 D Köngen T (0) F (0)

2 OUR PROMISE Die Schatzgräber. Gottfried August Bürge A winemaker, upon his death, summoned all his children, said: In our vineyard there s a treasure. Go, dig it out. Where shall we dig? they cried out loud. Just dig. Alas. The old man died. As soon as he was in the ground They started digging all around. With hoe, pick, and spade The sons their efforts made. No lump remained unturned The soil was sieved and churned, Their rakes moved back and forth. But no treasure did they find A bad deceit seemed to unwind. Yet, early in the following year To their amazement it was clear That every vine bore triple fruit. And only then the sons got wise; And so they dig, year after year More of the treasure out from here. The journey is the reward. With creativity, quality made in Germany and the utmost in customer-oriented partnership, our employees apply their experience of over 20 years in the field of component technology for their customers. Companies from many different industries place their trust in our philosophy. We are committed to maintaining a fair partnership with our customers and suppliers - one that is beneficial for all parties. Consistent customer orientation and groundbreaking innovations, high quality and comprehensive consulting competence make ASUTEC a competitive partner in the field of automation technology.

3 TABLE OF CONTENTS TABLE OF CONTENTS 2 3 Page 4 ABOUT ASUTEC Focus sector Data & Facts Requirement on function Quality Network Service Market Automized Material Flow Key Elements of Asutec Components Page 10 Page 24 Page 50 Page 56 Page 62 SEPARATOR WITHOUT DAMPING SEPARATOR WITH DAMPING RETURN STOPS POSITIONING UNIT Stop precise one or more accumulated workpiece pallets at a defined stop plate of the workpiece pallet in conveyor systems (for example Bosch Rexroth TS2). Upper and lower position of the stop plate can be detected by inductive or electronic proximity switch. The lowering speed or the start-up of the stop plate in its initial position can be set up by a throttle. Therefore the separating function has a very low noise level. Accessories can be selected as required. The more ambitious the problem specification the more working processes can be simplified by ASUTEC components. In this product line you will find damped separators specialized for shock-sensitive parts tailored to individual requirements. Damping modules will be used for vibrationfree damping of workpiece pallets up to the end position. They guarantee an optimal stability of the working pieces. The stop plate will remain in end position without counterforce. Therefore the workpiece pallets can be positioned exactly without additional indexing. The pneumatical damping can easily be adjusted to the weight of the pallet holder. Accessories can be selected as required. Return stops prevent the pallet holder from rebounding after the stopping procedure of the separator. Primarily in connection with undamped separators. Recommended for conveyor systems with low friction. Spring-loaded safety catch. Accessories can be selected as required. Fast positioning and lifting unit for precise, vertical lifting and indexing of workpiece holders. Attachment of electronic switches in t-slots, which indicate upper and lower position of piston rod. Bores for variable indexing bolt depending on application and workpiece holder. Indexing function pneumatically. Accessories can be selected as required. SEPARATORS FOR ROLLER CONVEYOR SYSTEMS Stop or damp precisely one or more accumulated workpiece pallets at a defined stop plate of workpiece pallet in roller conveyor systems. Suitable for cramped mounting spaces between the rolls. New ASUTEC development of stoppers with high stablility and resistance against contamination. High conveyor speeds and dynamic acceleration after the stopping procedure allow short cycle times. Accessories can be selected as required.

4 FOCUS SECTOR DATA & FACTS 4 5 FOCUS SECTOR As an international company with outstanding products and services, we provide groundbreaking solutions to our customers across a range of industries. We inspire our customers wherever production processes can improve efficiency by means of component technology in conveyor systems. In assembly lines or by interlinking assembly positions. We offer solutions for conveyor systems in following sectors: Food and packaging industry Automotive industry and components suppliers Medical technology Cleanroom conveyor systems ASUTEC DATA & FACTS PASSIONATELY DYNAMIC Headquarter: Asutec GmbH, Kueferstrasse 11, D Koengen Foundation: 2010 Employees: ASUTEC s employees apply their experience of over 20 years in the field of component technology for their customers Market significance: ASUTEC is a leading partner for component solutions for conveyor systems for linear motion and assembly technologies Business segments: damping, stopping and positioning modules, rotary and clamping modules, assembly modules and lifting units for conveyor systems Distribution partner: as an international company ASUTEC serves important business segments in the process automation and has a continuously increasing international network Certification: DIN EN ISO 9001:2008 (Quality management) since 12/2011 Photovoltaic and semiconductor industry High-speed conveyor systems Electronics industry

5 FUNCTIONAL REQUIREMENTS quality network service 6 7 Carriage 3000 kg 6m/min Sunroof Heat 9 m/min 12 m/min Transmission 1900 kg Dirt Washing machine 18 m/min 250 kg Oil Dust Universal-joint shaft 36 m/min 24 m/min Solar panel TV Sensors Mounting the assembly 100 kg Water 0,7 kg Cold Hearing instrument Circuit board Cardiac pacemaker 0,25 kg Mobile phone Clean room 50 m/min FUNCTIONAL REQUIREMENTS ON ASUTEC COMPONENTS Four key factors significantly affect the selection of the right components and define the functional requirements of the ASUTEC components: The velocity of the conveyor system The ambient conditions The goods to be transported with their various sensitivities The different weights of the goods to be transported PROVEN QUALITY ASUTEC components for material and information flow systems are produced in compliance with the quality-assurance guidelines under DIN ISO 9001:2008. This requires the creation, documentation, realization (application), maintenance and constant improvement of a standard-compliant quality management system (QMS). That means that we have to identify all processes that are necessary for the creation and operation of our QMS. Processes have to be measurable and influenceable. The company results have to be achieved through targeted guidance. Careful analysis and derived measures enable a continuous improvement of the QMS is possible. INTERNATIONAL PARTNERSHIP As an internationally active company ASUTEC serves important segments in the field of process automation and has a continuously increasing international network enabling projects of different dimensions to be realized. At the same time we keep a quick and professional service in mind. SERVICES ASUTEC accompanies and supports you across all phases of the value-added chain. We will assist you from the planning phases, through production up to the integration and adjustment of the components for your conveyor system. We carry projects, through strategically, competently and successfully. Consulting Services Professional project planning and expert realization of your individual solution - benefit from ASUTEC s expertise. Procurement Attractive terms and reliable delivery service ASUTEC provides security for all your purchases. We reduce the time spent on procurement. Commissioning We support you during the start of operation and assist you throughout the entire process. Operation Service technicians optimize the performance capability of your conveyor system by adjusting the components correctly. Repair Service Experienced employees are at your service and can cater for special requests and modifications.

6 market automatized Material flow key elements of asutec components 8 9 Variety and adaptability - Key criteria for success in the market The industry is characterized by short innovation times and product life cycles. This requires conveyor systems that adapt quickly to change. It is essential to be able to produce a rising number of product versions in a smaller quantity cost-effectively. ASUTEC offers a cost-effective, needs-oriented solution for the flow of material and information for every conveyor system. automated Material flow At an assembly line the workpieces are transported from one workstation to another with the help of a conveyor system. The workpiece pallets pick up the workpiece. All operations are done on the workpiece pallet. The data store on the workpiece pallet carries all information about processing states and targets. In front of each workstation one or more workpiece pallets can be queued, so small buffers can be formed. After finalization of each working procedure on each station the workpiece is released for the next workstation. At the end of the assembly procedure the workpiece can be removed. KEY ELEMENTS OF ASUTEC COMPONENTS At different stations, such as manual workstations, robotic or automated stations, the workpiece pallet is stopped by ASUTEC components while the conveyor continues. One or more accumulated workpiece pallets are stopped at a precise position or transported to their final position without vibrations. The so-called damped separator guarantees optimal stability of the workpieces and allows the transport of sensitive workpieces. Meanwhile the stop, free of counterforce, remains in its terminal position. The pneumatic damping force can be adapted steplessly to the weight of the workpiece pallet. Integrated inductive and electronic sensing options provide information about position of the stop itself. station workpiece damping stroke lowering stroke transport level pallet holder stop plate mounting at distance profile transfer direction of the transfer system

7 overview product group Features product group optimized for process forces A high stability and stiffness compensates working loads. cost saving Long service life reduce operational costs. space saving Compact design reduce the demand of the space requirements and of the working space. broad Product range A high degree of adaptability with heat and cold resistand or cleanroom variants. ASu-400 Stop Module for pallet holder loads up to 400 kg ASu-600 Stop Module for pallet holder loads up to 600 kg ASu-800 Stop Module for pallet holder loads up to 800 kg Maximum product quality at high automation process Separator without damping Stop precise one or more accumulated workpiece pallets at a defined stop plate of the workpiece pallet in conveyor systems (for example Bosch Rexroth TS2). Upper and lower position of the stop plate can be detected by inductive or electronic proximity switch. The lowering speed or the start-up of the stop plate in its initial position can be set up by using a throttle. Therefore the separating function has a very low noise level. Accessories can be selected as required.

8 ASU-400 ASU Operating range allowed accumulated load Operating range v = (m/min) 2) ASU-400 Mass WT (kg) 1) 400 kg 300 kg 250 kg 200 kg 110 kg 65 kg 50 kg 30 kg 1) Allowed accumulated load 2) Allowed conveying velocity: This information applies to friction of μ = 0,07 between the pallet holder and the conveyor band, for a standard ASUTEC stop plate. lowering force (theoretic) at 6 bar model ASU-400- EW-09 ASU-400- DW-09 ASU-400- EW-15 ASU-400- DW-15- ASU-400- EW-25 Lowering force (N) ASU-400- DW-25 asu-400 STOP MODULE PALLET HOLDER LOADS UP TO 400 KG air consumption model Air consumption circa in litre ASU-400- EW-09 ASU-400- DW-09 ASU-400- EW-15 ASU-400- DW-15 ASU-400- EW-25 ASU-400- DW-25 ASU- 400-DW- I-09 ASU- 400-DW- I-15 0,035 0,09 0,06 0,14 0,1 0,25 0,087 0,135 0,24 ASU- 400-DW- I-25 TECHNICAL DATA key to product description APPLICATION Stop one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or directly at the working piece. Can also be used for positioning of for example pneumatic cylinders. TYPE Pneumatical separator. Housing hard-anodized aluminium. Stop plate hardened steel. Stop plate with screw thread unhardened steel. Allowed pallet holder load up to 400 kg (conveying speed 6 m/min). EW (SINGLE ACTING) When depressurized the separator goes into the lock position via spring and the pallet will be stopped. DW (DOUBLE ACTING) When depressurized the separator keeps its last position. The separator has no spring therefore the lowering force will be higher. WEIGHT DATA All weight data relates to the total weight of the pallet holder (pallet holder + working piece), not the axial force. MAX. RAM PRESSURE Dependent on friction between palett holder and conveyor system, pallet holder and stop plate, pneumatical pressure and ambient conditions. CONNECTION Pneumatic connection: M5 Working Pressure: treated compressed air 4-8 bar MAINTENANCE Maintenance-free Example Product classification Type: Separator without damping Maximum ram pressure conveyor speed from 6 m/min up to 400 kg Function EW = single acting DW = double acting Lowering stroke (mm) 09 mm 15 mm 25 mm Temperature range ( degree = normal - 20 bis + 80 H = heat resistant - 20 bis K = cold resistant - 50 bis + 80 Query = without sensor I = nductive sensor E = electronic sensor Stop plate = without thread G = with thread Customer specific QUERY ASU-400-EW/DW-E Version E upper and lower position can be detected via electronic sensor. ASU-400-EW/DW-I Version I upper and lower position can be detected via inductive sensor. ASu EW Separator without damping, up to 400 kg, single acting, lowering stroke 9 mm ASu EW - DW H - K - - I - E - - G - Customerspecific no. SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request.

9 ASU-400 ASU dimensioning type (mm) 9 stroke 15 stroke 25 stroke A B 38,5 38,5 50 C D E 30,5 37,5 63,5 stop plate with screw thread (mm) 9 stroke 15 stroke 25 stroke F 12,5 17, Position detection sensor (mm) 9 stroke 15 stroke 25 stroke G H 37,5 44,5 54,5 C E 34, ,5 Item no. order no.: accessory description Electronic sensor Connector M8x1 Length 5 m Clamping holder M16x1 short version Position detection 09 stroke Position detection 15 stroke Position detection 25 stroke Switch holder for inductive proximity switch M12x Inductive sensor ø 12 mm Connector M12x1 Length 5 m Air connection M5 for tubing outside diameter 6 mm Air connection M5 for tubing outside diameter 6 mm Delivery air connection M5 for tubing outside diameter 6 mm Fastening set with long slot nuts Fastening set B with short spacer sleeve Fastening set A with long spacer sleeve Heat and cold resistand upon request. Subject to technical modification.

10 ASU-600 ASU Operating range allowed accumulated load Operating range v = (m/min) 2) ASU-600 Mass WT (kg) 1) 600 kg 425 kg 360 kg 275 kg 150 kg 95 kg 70 kg 40 kg 1) Allowed accumulated load 2) Allowed conveying velocity: This information applies to friction of μ = 0,07 between the pallet holder and the conveyor band, for a standard ASUTEC stop plate. lowering force (theoretic) at 6 bar model ASU-600-EW-10 ASU-600-DW-10 Lowering force (N) asu-600 STOP MODULE PALLET HOLDER LOADS UP TO 600 KG air consumption model Air consumption circa in litre ASU-600- EW-10 ASU-600- DW-10 ASU-600- DW-10-I 0,076 0,176 0,172 TECHNICAL DATA key to product description APPLICATION Stop one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or directly at the working piece. It can also be used for positioning pneumatic cylinders, for example. Stop module ASU-600 can be approached from all 4 sides. Reversing operation is possible. TYPE Pneumatical separator. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 600 kg (see table). STOP PLATE The stop plate is spring-loaded, so that a return stop can be renounced. The pallet holder must be prepared for this. EW (SINGLE ACTING) When depressurized the separator goes into the lock position via spring and the pallet will be stopped. DW (DOUBLE ACTING) When depressurized the separator keeps its last position. The separator has no spring therefore the lowering force will be higher. WEIGHT DATA All weight data relates to the total weight of the pallet holder (pallet holder + working piece), not the axial force. MAX. RAM PRESSURE Dependent on friction between palett holder and conveyor system, pallet holder and stop plate, pneumatical pressure and ambient conditions. CONNECTION Pneumatic connection: M5 Working Pressure: treated compressed air 4-8 bar MAINTENANCE Maintenance-free Example ASu EW - 10 Separator without damping, up to 600 kg, single acting, lowering stroke 10 mm Product classification Type: Separator without damping ASu Maximum ram pressure conveyor speed from 6 m/min up to 600 kg EW - DW - Function EW = single acting DW = double acting 10 - Lowering stroke (mm) 10 mm I - Query = without sensor I = nductive sensor Customer specific Customerspecific no. QUERY ASU-600-EW/DW-I Version I upper and lower position can be detected via inductive sensor. SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request.

11 ASU-600 ASU dimensioning Item no. order no.: accessory description Connector M12x1 Length 5 m Inductive sensor M12x Clamping holder M16x1 Short version Air connection M5 for tubing outside diameter 6 mm Air connection M5 for tubing outside diameter 6 mm Delivery air connection M5 for tubing outside diameter 6 mm Heat and cold resistand upon request. Subject to technical modification.

12 ASU-800 ASU Operating range allowed accumulated load Operating range v = (m/min) 2) ASU-800 Mass WT (kg) 1) 800 kg 800 kg 800 kg 800 kg 450 kg 250 kg 200 kg 100 kg 1) Allowed accumulated load 2) Allowed conveying velocity: This information applies to friction of μ = 0,07 between the pallet holder and the conveyor band, for a standard ASUTEC stop plate. lowering force (theoretic) at 6 bar model ASU-800- EW-10 ASU-800- DW-10 ASU-800- EW-20 Lowering force (N) asu-800 STOP MODULE PALLET HOLDER LOADS UP TO 800 KG air consumption model Air consumption circa in litre ASU-800- EW-20- ASU-800- EW-10 ASU-800- DW-10 ASU-800- DW-10-I ASU-800- EW-20 ASU-800- DW-20 0,076 0,176 0,171 0,151 0,351 0,35 ASU-800- DW-20-I TECHNICAL DATA key to product description APPLICATION Stop one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or directly at the working piece. It can also be used for positioning pneumatic cylinders, for example. TYPE Pneumatical separator. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 800 kg (see table). EW (SINGLE ACTING) When depressurized the separator goes into the lock position via spring and the pallet will be stopped. DW (DOUBLE ACTING) When depressurized the separator keeps its last position. The separator has no spring therefore the lowering force will be higher. WEIGHT DATA All weight data relates to the total weight of the pallet holder (pallet holder + working piece), not the axial force. MAX. RAM PRESSURE Dependent on friction between palett holder and conveyor system, pallet holder and stop plate, pneumatical pressure and ambient conditions. CONNECTION Pneumatic connection: M5 Working Pressure: treated compressed air 4-8 bar MAINTENANCE Maintenance-free Example Product classification Type: Separator without damping Maximum ram pressure conveyor speed from 6 m/min up to 800 kg Function EW = single acting DW = double acting Lowering stroke (mm) 10 mm 20 mm Temperature range ( degree) = normal - 20 bis + 80 H = heat resistant - 20 bis K = cold resistant - 50 bis + 80 Query = without sensor I = nductive sensor E = electronic sensor Stop plate = without thread G = with thread Customer specific QUERY ASU-800-EW/DW-E Version E upper and lower position can be detected via electronic sensor. ASU-800-EW/DW-I Version I upper and lower position can be detected via inductive sensor. ASu EW Separator without damping, up to 800 kg, single acting, lowering stroke 10 mm ASu EW - DW H - K - - I - E - - G - Customerspecific no. SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request.

13 ASU-800 ASU dimensioning (mm) 10 stroke ew/dw 20 stroke EW/DW 10 stroke EW/DW-E A B 38, ,5 45 C D ,5 E 14,5 24,5 14,5 24,5 F type 20 stroke EW/DW-E POS-NR: bestell-nr: zubehörteil ausführung Electronic sensor Connector M8x1 Length 5 m Connector M12x1 Length 5 m Inductive sensor ø 12 mm Clamping holder M16x1 Short version Position detection Stroke Position detection Stroke Switch holder for inductive proximity switch ø 12 mm Air connection M5 For tubing outside diameter 6 mm Air connection M5 For tubing outside diameter 6 mm Delivery air connection M5 For tubing outside diameter 6 mm Fastening set Heat and cold resistand upon request. Subject to technical modification.

14 overview product group Features product group ASM-15 ASm-20/60 ASm-100 ASm-160 ASm-260 ASM-500/1200 Damping module for pallet holder loads 0,25-15 kg Damping module for pallet holder loads 1-60 kg Damping module for pallet holder loads kg Damping module for pallet holder loads kg Damping module for pallet holder loads kg Damping module for pallet holder loads kg Medical technology handling and transportation of highly sensitive samples and liquids. Precise Intelligent Fulfills highest requirements regarding positioning accuracy of workpiece pallet. Self-adjusted within a wide weight rage. Reliable Comfortable 100% reliablility at considerable weight differences of working pieces. Damping force or damping velocity can be adjusted easily. Separator with damping Damping modules will be used for vibration-free damping of workpiece pallets up to the end position. They guarantee an optimal stability of the working pieces. The stop plate will remain in end position without counterforce. Therefore the workpiece pallets can be positioned exactly without additional indexing. The pneumatical damping can easily be adjusted to the weight of the pallet holder. Accessories can be selected as required.

15 ASM-15 ASM Operating range allowed accumulated load Operating range v = (m/min) 2) ASM-15 Mass WT (kg) 1) 0,25-15 kg 0,25-10 kg 0,25-9 kg 0,25-7 kg 0,25-6 kg 0,25-4 kg 0,25-2 kg 0,25-1 kg 1) Allowed accumulated load 2) Allowed conveying velocity: This information applies to friction of μ = 0,07 between the pallet holder and the conveyor band, for a standard ASUTEC stop plate. lowering force (theoretic) at 6 bar adjustment damping model ASM-15-EW-07 ASM-15-DW-07 Lowering force (N) asm-15 SEPARATOR WITH DAMPING for PALLET HOLDER LOADS 0,25-15 kg air consumption model ASM-15-EW-07 ASM-15-DW-07 Air consumption circa in litre 0,036 0,066 TECHNICAL DATA key to product description APPLICATION Stop and damp one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or directly at the working piece. It can also be used for positioning pneumatic cylinders, for example. TYPE Pneumatical separator. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 15 kg (see table). EW (SINGLE ACTING) When depressurized the separator goes into the lock position via spring and the pallet will be stopped. DW (DOUBLE ACTING) When depressurized the separator keeps its last position. The separator has no spring therefore the lowering force will be higher. CONNECTION Pneumatic connection: M5 Working Pressure: treated compressed air 4-8 bar WEIGHT DATA All weight data relates to the total weight of the pallet holder (pallet holder + working piece), not the axial force. MAX. RAM PRESSURE Dependent on friction between workpiece holder and conveyor system, workpiece holder and stop plate, pneumatical pressure and ambient conditions. MAINTENANCE Maintenance-free Example Product classification Type: Separator with damping Maximum ram pressure Conveyor speed from 6 m/min up to 15 kg Function EW = single acting DW = double acting Lowering stroke (mm) 07 mm Temperature range ( degree) = normal - 20 bis + 80 H = heat resistant - 20 bis K = cold resistant - 50 bis + 80 Customer specific Damping Self-adjusted damping in a special field can also be adjusted on the upper side of the separator. + = increase the damping force = reduce the damping force ASM EW - 07 Separator, with damping, up to 15 kg, single acting, lowering stroke 7 mm ASM EW - DW H - K - Customerspecific no. SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request.

16 ASM-15 ASM dimensioning Item no. order no.: accessory description Fastening set Air connection M5 for tubing external diameter Ø 6 mm Air connection M5 for tubing external diameter Ø 6 mm Delivery air connection M5 for tubing external diameter Ø 6 mm Heat and cold resistand upon request. Subject to technical modification.

17 ASM-20/60 ASM-20/ Operating range allowed accumulated load operating range v = (m/min) 2) ASM-20 Mass WT (kg) 1) 1-20 kg 1-10 kg 1-10 kg 1-10 kg 1-7 kg 1-5 kg 1-3 kg 1-1,5 kg ASM-60 Masse WT (kg) 1) 3-60 kg 3-40 kg 3-35 kg 3-30 kg 3-24 kg 3-18 kg 3-10 kg 3-5 kg 1) Allowed accumulated load 2) Allowed conveying velocity: This information applies to friction of μ = 0,07 between the pallet holder and the conveyor band, for a standard ASUTEC stop plate. lowering force (theoretic) at 6 bar model ASM-20- EW-08 ASM-60- EW-08 ASM-20- DW-08 ASM-60- DW-08 ASM-20- EW -13 ASM-60- EW -13 ASM-20- DW-13 Lowering force (N) ASM-60- DW-13 asm-20/60 DAMPING MODULE PALLET HOLDER LOADS 1-60 KG air consumption model Air consumption circa in litre ASM-20- EW-08 ASM-60- EW-08 ASM-20- DW-08 ASM-60- DW-08 ASM-20- EW-13 ASM-60- EW-13 ASM-20- DW-13 ASM-60- DW-13 ASM- 20/60- DW-08-I 0,08 0,08 0,125 0,125 0,1 0,1 0,176 0,176 0,122 0,175 ASM- 20/60- DW-13-I TECHNICAL DATA key to product description APPLICATION Stop, separate and damp one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or directly at the working piece. It can also be used for positioning pneumatic cylinders, for example. TYPE Pneumatical separator. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 60 kg (see table). EW (SINGLE ACTING) When depressurized the separator goes into the lock position via spring and the pallet will be stopped. DW (DOUBLE ACTING) When depressurized the separator keeps its last position the separator has no spring therefore the lowering force will be higher. CONNECTION Pneumatic connection: M5 Working Pressure: treated compressed air 4-8 bar WEIGHT DATA All weight data relates to the total weight of the pallet holder (pallet holder + working piece), not the axial force. MAX. RAM PRESSURE Dependent on friction between workpiece holder and conveyor system, workpiece holder and stop plate, pneumatical pressure and ambient conditions. MAINTENANCE Maintenance-free Example Product classification Type: Separator with damping Maximum ram pressure Conveyor speed from 6 m/min up to 60 kg Function EW = single acting DW = double acting Lowering stroke (mm) 08 mm 13 mm Temperature range ( degree) = normal - 20 bis + 80 H = heat resistant - 20 bis K = cold resistant - 50 bis + 80 Position sensor = without sensor I = inductive sensor E = electronic sensor Stop plate = Steel stop KU = plastic stop Query = without sensor S = query stop plate retracted Customer specific query ASM-20/60-EW-E Version E upper and lower position can be detected via electronic sensor. ASM-20/60-EW-I Version I upper and lower position can be detected via inductive sensor. ASM EW - 08 Separator, with damping, up to 60 kg, single acting, lowering stroke 8 mm ASM EW - DW H - K - - I - E - - KU - - S - Customerspecific no. Damping Self-adjusted damping in a special field can also be adjusted on the upper side of the separator + = increase the damping force = reduce the damping force adjustment damping SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request.

18 ASM-20/60 ASM-20/ Bore for position detection dimensioning M5 For air connection Damping stroke 6 A Lowering stroke B C With steel stop D With plastic stop , With inductive sensor Double acting With electronic sensor 13 mm lowering stroke C C C Item no. order no.: accessory description Inductive sensor 8x Electronic sensor Connector M8x1 Length 5 m Clamping holder M16x1 Short version E Position detection Stroke 8 M16x1 for clamping holder type (mm) ASM-20/60-EW-08 ASM-20/60-DW-08 ASM-20/60-EW-08-E ASM-20/60-EW-13 A B 38,8 38,8 38,8 44 C ,5 87 D ,5 E Position detection Stroke Switch holder for inductive proximity switch ø 12 mm Inductive proximity switch M12x Connector M12x1 Length 5 m Air connection M5 for tubing external diameter ø 6 mm Air connection M5 for tubing external diameter ø 6 mm Delivery air connection M5 for tubing external diameter ø 6 mm Fastening set A with long spacer sleeves Fastening set B with short spacer sleeves Fastening set with long slot nuts Heat and cold resistand upon request. Subject to technical modification.

19 ASM-100 ASM Operating range allowed accumulated load operating range v = (m/min) 2) ASM-100 Mass WT (kg) 1) kg 3-70 kg 3-60 kg 3-50 kg 3-40 kg 3-30 kg 3-17 kg 3-9 kg 1) Allowed accumulated load 2) Allowed conveying velocity: This information applies to friction of μ = 0,07 between the pallet holder and the conveyor band, for a standard ASUTEC stop plate. lowering force (theoretic) at 6 bar adjustment damping model ASM-100-EW-08 ASM-100-DW-08 Lowering force (N) asm-100 DAMPING MODULE PALLET HOLDER LOADS KG air consumption model ASM-100-EW-08 ASM-100-DW-08 Air consumption circa in litre 0,125 0,185 TECHNICAL DATA key to product description APPLICATION Stop, separate and damp one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or directly at the working piece. It can also be used for positioning pneumatic cylinders, for example. TYPE Pneumatical separator. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 100 kg (see table). EW (SINGLE ACTING) When depressurized the separator goes into the lock position via spring and the pallet will be stopped. DW (DOUBLE ACTING) When depressurized the separator keeps its last position the separator has no spring therefore the lowering force will be higher. CONNECTION Pneumatic connection: M5 Working Pressure: treated compressed air 4-8 bar WEIGHT DATA All weight data relates to the total weight of the pallet holder (pallet holder + working piece), not the axial force. MAX. RAM PRESSURE Dependent on friction between workpiece holder and conveyor system, workpiece holder and stop plate, pneumatical pressure and ambient conditions. MAINTENANCE Maintenance-free example Product classification Type: Separator with damping Maximum ram pressure Conveyor speed from 6 m/min up to 100 kg Function EW = single acting DW = double acting Lowering stroke (mm) 08 mm Query = without sensor I = inductive sensor upon Customer specific QUERY ASM-100-EW-I Version I upper and lower position can be detected via inductive sensor. Damping Self-adjusted damping in a special field can also be adjusted on the upper side of the separator + = increase the damping force = reduce the damping force ASM EW - 08 Separator, with damping, up to 100 kg, single acting, lowering stroke 8 mm ASM EW - DW I - Customer specific no. SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request.

20 ASM-100 ASM dimensioning Item no. order no.: accessory description Air connection M5 for tubing external diameter ø 6 mm Air connection M5 for tubing external diameter ø 6 mm Delivery air connection M5 for tubing external diameter ø 6 mm Connector M12x1 Length 5 m Inductive proximity switch M12x Clamping holder M16x1 short version Fastening set for tubing external diameter ø 6 mm Heat and cold resistand upon request. Subject to technical modification.

21 ASM-160 ASM Operating range allowed accumulated load operating range v = (m/min) 2) ASM-160 Mass WT (kg) 1) kg kg kg kg 5-60 kg 3-40 kg 3-27 kg 3-15 kg 1) Allowed accumulated load 2) Allowed conveying velocity: This information applies to friction of μ = 0,07 between the pallet holder and the conveyor band, for a standard ASUTEC stop plate. lowering force (theoretic) at 6 bar adjustment damping model ASM-160-EW-09 ASM-160-DW-09 Lowering force(n) asm-160 DAMPING MODULE PALLET HOLDER LOADS KG air consumption model ASM-160-EW-09 ASM-160-DW-09 Air consumption circa in litre 0,18 0,25 TECHNICAL DATA key to product description APPLICATION Protected against dust and liquids.stop, separateand damp one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or directly at the working piece. It can also be used for positioning pneumatic cylinders, for example. TYPE Pneumatical separator. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 100 kg (see table). EW (SINGLE ACTING) When depressurized the separator goes into the lock position via spring and the pallet will be stopped. DW (DOUBLE ACTING) When depressurized the separator keeps its last position. The separator has no spring therefore the lowering force will be higher. CONNECTION Pneumatic connection: M5 Working Pressure: treated compressed air 4-8 bar WEIGHT DATA All weight data relates to the total weight of the pallet holder (pallet holder + working piece), not the axial force. MAX. RAM PRESSURE Dependent on friction between workpiece holder and conveyor system, workpiece holder and stop plate, pneumatical pressure and ambient conditions. MAINTENANCE Maintenance-free Example Product classification Type: Separator with damping Maximum ram pressure Conveyor speed from 6 m/min up to 160 kg Function EW = single acting DW = double acting Lowering stroke (mm) 09 mm Query I = inductive sensor, Standard version E = electronic sensor Customer specific QUERY ASM-160-EW-E Version E upper and lower position can be detected via electronic sensor. ASM-160-EW-I Version I upper and lower position can be detected via inductive sensor. Damping Self-adjusted damping in a special field can also be adjusted on the upper side of the separator + = increase the damping force = reduce the damping force ASM EW E Separator, with damping, up to 160 kg, single acting, lowering stroke 9 mm, electronic sensor ASM EW - DW I - E - Customespecific no. SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request.

22 ASM-160 ASM dimensioning Item no. order no.: accessory description Electronic sensor Connector M8x1 Length 5 m Air connection M5 for tubing external diameter ø 6 mm Air connection M5 for tubing external diameter ø 6 mm Air connection M5 for tubing external diameter ø 6 mm Connector M12x1 Length 5 m Inductive proximity switch ø 12 mm Clamping holder M16x1 short version Fastening set A with long spacer sleeves Fastening set B with short spacer sleeves Heat and cold resistand upon request. Subject to technical modification.

23 ASM-260 ASM Operating range allowed accumulated load operating range v = (m/min) 2) ASM-260 Mass WT (kg) 1) kg kg kg kg kg 1) Allowed accumulated load 2) Allowed conveying velocity: This information applies to friction of μ = 0,07 between the pallet holder and the conveyor band, for a standard ASUTEC stop plate kg kg kg lowering force (theoretic) at 6 bar adjustment damping model ASM-260-EW-09 Lowering force (N) 413 asm-260 DAMPING MODULE PALLET HOLDER LOADS KG air consumption model Air consumption circa in litre ASM-260-EW-09 0,18 TECHNICAL DATA key to product description APPLICATION Protected against dust and liquids. Stop, separate and damp one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or directly at the working piece. It can also be used for positioning pneumatic cylinders, for example. TYPE Pneumatical separator. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 260 kg (see table). EW (SINGLE ACTING) When depressurized the separator goes into the lock position via spring and the pallet will be stopped. QUERY ASM-260-EW-E Version E upper and lower position can be detected via electronic sensor. ASM-260-EW-I Version I upper and lower position can be detected via inductive sensor. Damping self-adjusted damping in a special field can also be adjusted on the upper side of the separator + = increase the damping force = reduce the damping force CONNECTION Pneumatic connection: G1/8 Working Pressure: treated compressed air 4-8 bar WEIGHT DATA All weight data relates to the total weight of the pallet holder (pallet holder + working piece), not the axial force. MAX. RAM PRESSURE Dependent on friction between workpiece holder and conveyor system, workpiece holder and stop plate, pneumatical pressure and ambient conditions. MAINTENANCE Maintenance-free example ASM EW I Separator, with damping, up to 260 kg, single acting, lowering stroke 9 mm Product classification Type: Separator with damping Maximum ram pressure Conveyor speed from 6 m/min up to 260 kg Function EW = single acting ASM EW Lowering stroke (mm) 09 mm I - E - Query I = inductive sensor, Standard version E = electronic sensor Customer specific Customespecific no. SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request.

24 ASM-260 ASM dimensioning Item no. order no.: accessory description Electronic sensor Connector M8x1 Length 5 m Connector M12x1 Length 5 m Inductive Proximity switch M12x Clamping holder M16x1 short version Air connection G1/8 for tubing external diameter ø 6 mm Delivery air connection G1/8 for tubing external diameter ø 6 mm Heat and cold resistand upon request. Subject to technical modification.

25 ASM-500/1200 ASM-500/ Operating range allowed accumulated load operating range v = (m/min) 2) ASM-500 Masse WT (kg) 1) kg ASM-1200 Masse WT (kg) 1) kg kg kg kg kg kg kg kg kg kg kg kg 1) Allowed accumulated load 2) Allowed conveying velocity : This information applies to friction of μ = 0,07 between the pallet holder and the conveyor band, for a standard ASUTEC stop plate kg lowering force (theoretic) at 6 bar adjustment damping at ASM-500 model ASM-500/1200-EW-15 ASM-500/1200-DW-15 Lowering force (N) asm-500/1200 DAMPING MODULE PALLET HOLDER LOADS KG air consumption model ASM-500-EW-15 ASM-500-DW-15 ASM-1200-EW-15 ASM-1200-DW-15 Air consumption circa in litre 0,45 0,70 0,30 0,54 TECHNICAL DATA APPLICATION Protected against dust and luiquids. Stop, separate and damp one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or directly at the working piece. It can also be used for positioning pneumatic cylinders, for example. Damping (ASM-500) Self-adjusted damping in a special field can also be adjusted on the upper side of the separator + = increase the damping force = reduce the damping force key to product description example TYPE Pneumatical separator. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 1200 kg (see table). EW (SINGLE ACTING) When depressurized the separator goes into the lock position via spring and the pallet will be stopped. DW (DOUBLE ACTING) When depressurized the separator keeps its last position. The separator has no spring therefore the lowering force will be higher. QUERY ASM-500-EW/DW-E Version E upper and lower position can be detected via electronic sensor. ASM-500-EW/DW-I Version I upper and lower position can be detected via inductive sensor. ASM-1200-EW/DW-E Version E upper and lower position can be detected via electronic sensor. ASM-1200-EW/DW-I Version I upper and lower position can be detected via inductive sensor. CONNECTION Pneumatic connection: G1/8 Working Pressure: treated compressed air 4-8 bar WEIGHT DATA All weight data relates to the total weight of the pallet holder (pallet holder + working piece), not the axial force. MAX. RAM PRESSURE Dependent on friction between workpiece holder and conveyor system, workpiece holder and stop plate, pneumatical pressure and ambient conditions. MAINTENANCE Maintenance-free ASM EW - 15 Separator, with damping, up to 1200 kg, single acting, lowering stroke 15 mm Product classification Type: Separator with damping Maximum ram pressure Conveyor speed from 6 m/min up to 1200 kg ASM EW - DW - Function EW = single acting Lowering stroke (mm) 15 mm E - Query I = inductive sensor, Standard version E = electronic sensor Customer specific Customespecific no. SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request.

26 ASM-500/1200 ASM-500/ dimensioning (mm) ASM-500-EW ASM-500-DW ASM-1200-EW ASM-1200-DW A B 57, ,5 46 C D E 13,5 13,5 type Item no. order no.: accessory description Electronic sensor Connector M8x1 Length 5 m Air connection G1/8 for tubing external diameter ø 6 mm Delivery air connection G1/8 for tubing external diameter ø 6 mm Clamping holder M16x1 short version Inductiver proximity switch M12x Connector M12x1 Length 5 m Heat and cold resistand upon request. Subject to technical modification.

27 overview product group Features product group Highest dynamic Assembly technique - ASUTEC supplies components for modular plants. ASR ASRP Return stop minimum weight of pallet holder 3 kg Return stop pneumatic Minimum load of pallet holder 3 kg Up to 95% shorter cycle times. Optimized process forces High stability and stiffness compensate process forces. Cost optimized Reversing operation Optimised for efficient and cost effective application. Pneumatical return stops can be applied in reversing operation. Return stop Return stops prevent the pallet holder from rebounding after the stopping procedure of the separator. Primarily in connection with undamped separators. Recommended for conveyor systems with low friction. Spring-loaded safety catch. Accessories can be selected as required.

28 ASR ASR dimensioning asr RETURN STOP MINIMUM WEIGHT OF PALLET HOLDER 3 KG TECHNICAL DATA APPLICATION AND TYPE The return stop is used to avoid rebounding of the workpiece pallet when using separators without damping. Housing hard-anodized aluminium. Stop hardened steel. Minimum weight of pallet holder: 3 kg Maximum weight of pallet holder: 1200 kg key to product description Example SPRING FORCE upper position: 2,2N lower position: 9,1 N SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request. SEQUENCE open: through overrun the pallet holder close: via spring force MAINTENANCE No maintenance is required. ASR Return stop Product classification Type: Return stop ASR - Customer specific Customerspecific no. 1 Item no. order no.: accessory description Fastening set Heat and cold resistand upon request. Subject to technical modification.

29 ASRP ASRP dimensioning asrp RETURN STOP PNEUMATIC MINIMUM WEIGHT OF PALLET HOLDER 3 KG Technical data APPLICATION AND TYPE The return stop is used to avoid rebounding of the workpiece pallet when using separators without damping. The ASRP return stop allows also a pneumatic lowering procedure for example in order to move the pallet by hand. Housing hard-anodized aluminium. Stop hardened steel. Minimum weight of pallet holder: 3 kg Maximum weight of pallet holder: 1200 kg key to product description example SPRING FORCE upper position: 2,2N lower position: 9,1 N SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request. SEQUENCE open: through overrun the pallet holder close: via spring force AIR CONSUMPTION in Liter 6 bar per Cycle ASRP approximately 0,013 CONNECTION M5 ASRP Return stop Product classification Type: Return stop ASRP - - I - Query = without sensor I = with inductive senso Customer specific Customerspecific no. Item no. order no.: accessory description Clamping holder M16x1 long version MAINTENANCE No maintenance is required Inductive proximity switch M12x1 Length 5 m Connector M12x1 Length 5 m Air connection M5 for tubing external diameter ø 6 mm Air connection M5 for tubing external diameter ø 6 mm Delivery air connection M5 for tubing external diameter ø 6 mm Fastening set Heat and cold resistand upon request. Subject to technical modification.

30 overview product Group Features product Group Precise Modular Fulfils highest requirements on positioning of workpiece holders. Indexing bolt standardized and fabricated in house expand the range of application and increase the modularity. Individual Extremely stable Stroke arresting in ever dimension can be supplied. For extremely high lateral load. ASP Lifting and positioning unit Operating pressure 4-8 bar Solar industry high dynamic, low breakage rate innovative solutions for the assembly of solar modules. Positioning unit Fast positioning and lifting unit for precise, vertical lifting and indexing of workpiece holders. Attachment of electronic switches in t-slots, which indicate upper and lower position of piston rod. Bores for variable indexing bolt depending on application and workpiece holder. Indexing function pneumatically. Accessories can be selected as required.

31 ASP ASP THEORETICAL PISTON FORCE betriebsdruck 4 bar 6 bar 8 bar Extend 320 N 490 N 670 N Retract 210 N 310 N 410 N Variants locating bolts Description order-nr: Locating bolt, round asp Lifting and positioning unit Operating pressure 4-8 bar Locating bolt, free milled TECHNICAL DATA key to product description APPLICATION Positioning unit for ASP 490 for indexing and positioning of workpiece holders. Differenz endexing bolts can be set in piston rod. CONNECTION Pneumatic connection: G 1/8 Working Pressure: treated compressed air 4-8 bar Example TYPE Pneumatic cylinder. Housing hard anodized aluminium. Stop plate hardened steel with Passborung for indexing bolts. QUERY ASP-490 Standard version upper and lower position can be detected via electronic sensor. ASP-490-I Version I upper and lower position can be detected via inductive sensor. INDEXING FUNCTION Double acting. Upper and lower position can be accessed pneumatically. MAINTENANCE Maintenance-free Product classification Type: Indexing cylinder Piston force (N) 6 bar operating pressure Stroke (mm) 31 mm Further strokes upon request Query - = electronic sensor, standard version I = inductive sensor Spacing dimension (see measure B) = 20,5 TS2 = 20,0 Customer-specific SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request. ASP Indexing Cylinder, piston force 490 N, lowering force 31 mm ASP I - - TS2 - Customerspecific no.

32 ASP ASP dimensioning (mm) Standard TS2 A 45,5 45 B 20, Item no. order no.: accessory description Connector M12x1 Length 5 m Inductive proximity switch M12x Clamping holder M16x1 long version Air connection G1/8 for tubing external diameter ø 6 mm Delivery air connection G1/8 for tubing external diameter ø 6 mm Index bolts round Index bolts free milled Fastening set B with long spacer sleeves Fastening set A with short spacer sleeves Electronic sensor Connector M8x1 Length 5 m Heat and cold resistand upon request. Subject to technical modification.

33 overview product Group Features product Group Space -optimised Lean edition offers also an optimum of damping and stopping characteristics even in tight spaces. Robust and reliable Reliable working under extreme environmental conditions like dirt and dust. Laboratory automation cost-effective implementation of reproducible laboratory processes. ASur-400 ASmr-400 Stopping Module Maximum load of pallet holder 400 kg Damping module Maximum load of pallet holder 400 kg Rapid data exchange Integrated query technology gives information about final position. Adustment Simple change from stopping to damping module and viceversa. Geometries are optimally adjusted. Separator for roller conveyor system Stop or damp precisely one or more accumulated workpiece pallets at a defined stop plate of workpiece pallet in roller conveyor systems. Suitable for cramped mounting spaces between the rolls. New ASUTEC development of stoppers with high stablility and resistance against contamination. High conveyor speeds and dynamic acceleration after the stopping procedure allow short cycle times. Accessories can be selected as required.

34 ASur-400 ASur Operating range allowed accumulated load operating range v = (m/min) 2) ASUR-400 Mass WT (kg) 1) 400 kg 300 kg 250 kg 200 kg 110 kg 65 kg 50 kg 30 kg 1) Allowed accumulated load 2) Allowed conveying velocity: This information applies to friction of μ = 0,07 between the pallet holder and the conveyor band, for a standard ASUTEC stop plate. lowering force (theoretic) at 6 bar model ASUR-400-EW-15 ASUR-400-DW-15 Lowering force (N) asur-400 Separator for roller conveyor system Stopping Module Maximum load of pallet holder 400 kg air consumption model ASUR-400-EW-15 ASUR-400-DW-15 Air consumption circa in litre 0,24 0,49 TECHNICAL DATA key to product description APPLICATION Protected against dust and liquids. Stop and separate one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or directly at the working piece. It can also be used for positioning pneumatic cylinders, for example. TYPE Pneumatical separator. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 400 kg (see table). EW (SINGLE ACTING) When depressurized the separator goes into the lock position via spring and the pallet will be stopped. DW (DOUBLE ACTING) When depressurized the separator keeps its last position. The separator has no spring therefore the lowering force will be higher. WEIGHT DATA All weight data relates to the total weight of the workpiece pallet (pallet with material), not the axial force. MAX. RAM PRESSURE Dependent on friction between workpiece pallet and conveyor system, workpiece pallet and stop plate, pneumatical pressure and ambient conditions. CONNECTION Pneumatic connection: G 1/8 Working pressure: treated compressed air 4-8 bar MAINTENANCE No maintenance is required. example Product classification Type: Separator without damping, for roller conveyor systems Maximum ram pressure conveyor speed from 6 m/min up to 400 kg Function EW = single acting DW = double acting Lowering stroke(mm) 15 mm Customer specific QUERY ASUR-400-EW/DW Standard version upper and lower position can be detected via inductive sensor. SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request. ASuR ew - 15 Separator, without damping, up to 400 kg, for roller conveyor systems, lowering stroke 15 mm ASuR EW - DW Customer specific no.

35 ASur-400 ASur dimensioning Item no. order no.: accessory description Air connection G 1/8 for tubing external diameter ø 6 mm Delivery air connection G 1/8 for tubing external diameter ø 6 mm Clamping holder M16x1 long version Inductive proximity switch M12x Connector M12x1 Length 5 m Heat and cold resistand upon request. Subject to technical modification.

36 ASMr-400 ASMr Operating range allowed accumulated load operating range v = (m/min) 2) ASMR-400 Mass WT (kg) 1) 400 kg 300 kg 250 kg 200 kg 110 kg 65 kg 50 kg 30 kg 1) Allowed accumulated load 2) Allowed conveying velocity : This information applies to friction of μ = 0,07 between the pallet holder and the conveyor band, for a standard ASUTEC stop plate. lowering force (theoretic) at 6 bar adjustment damping model ASMR-400-EW-15 Lowering force (N) 1219 asmr-400 Separator for roller conveyor system Damping module Maximum load of pallet holder 400 kg air consumption model Air consumption circa in litre ASMR-400-EW-15 0,53 TECHNICAL DATA key to product description APPLICATION Protected against dust and liquids. Stop, separate and damp one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or directly at the working piece. It can also be used for positioning pneumatic cylinders, for example. TYPE Pneumatical separator. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 400 kg (see table). EW (SINGLE ACTING) When depressurized the separator goes into the lock position via spring and the pallet will be stopped. QUERY ASMR-400-EW-I Version I - upper and lower position can be detected via inductive sensor. WEIGHT DATA All weight data relates to the total weight of the workpiece pallet (pallet with material), not the axial force. MAX. RAM PRESSURE Dependent on friction between workpiece pallet and conveyor system, workpiece pallet and stop plate, pneumatical pressure and ambient conditions. CONNECTION Pneumatic connection: G 1/8 Working pressure: treated compressed air 4-8 bar MAINTENANCE No maintenance is required. example Product classification Type: Separator with damping for roller conveyor systems Maximum ram pressure conveyor speed from 6 m/min up to 400 kg Function EW = single acting DW = double acting on request Lowering stroke (mm) 15 mm Customer specific SCOPE OF SUPPLY The items will be delivered without. Accessories can be freely selected according to the ambient conditions. All supplied accessory parts are mounted by customer request. ASMR EW - 15 Separator, with damping, up to 400 kg, for roller conveyor systems ASMR EW - DW Customer specific no.