Wire Mesh Grip Families
|
|
- Philip Conley
- 5 years ago
- Views:
Transcription
1 Wire Mesh Grip Families Complete offering of wire mesh grips built tough for industrial applications Arrow Hart supplies a broad selection of strain relief, pulling and support grips in a wide range of styles and sizes to serve all of your cable protection needs Strain Relief Grips Strain Relief Grips are used to connect cable enclosures and industrial equipment. These grips prevent cable or conduit pull-out at the point of termination due to tension. Strain Relief Grips also distribute strain throughout the length of the mesh during bending, prolonging the life of the cable. distribute the weight of vertical drops and sloping runs over the length of the grip to protect the cable from damage. A variety of hanging styles are available to service numerous cable support installations. Pulling Grips Pulling Grips serve as reusable tools for pulling cables, wires and/or rope in overhead and underground cable pulls. These grips protect the cable from abrasion and ease the cable through bends and rough surfaces. 4
2 Quick Reference Selection Guide Strain Relief Grips Prevent cable pullout Reduce stress and strain on conductors at point of wire termination Deluxe Cord Grips Dust Tight Wide Range I-Grips Flexible Metallic Conduit Grips Indoor and outdoor use where cord is subjected to moisture. Wiring of pendant stations, processing equipment and hand tools. Indoor use. Connects flexible cord to electrical enclosures. Indoor and outdoor use. Provides heavy duty strain relief on plug and connector cord assemblies and portable equipment. DC Series TC Series I Series LT Series Connects liquidtight conduit to electrical enclosures. Provides a liquidtight seal and protects against cable damage caused by vibration, flexing and strain. Hold and support cables, metal rods, hose and tubing Standard Duty Support Heavy Duty Support Service Drop Support Bus Drop Support Indoor and outdoor use. Supports vertical cable runs up to 99 feet and loads up to 600 pounds. Available in various mesh styles and attachment means. Indoor and outdoor use. Support vertical cable runs over 100 feet and loads over 600 pounds. Closed mesh only, single and double eye. Indoor and outdoor use. Supports light duty cable, fiber optic cable and service entrance cable. SG Series SGT Series SD Series BD Series Indoor use. Light duty support for overhead flexible cables or bus drop cables. Pulling Grips Reusable cable installation tool Junior Pulling Light Duty Medium Duty Heavy Duty Multi-Weave Slack Indoor use. Low tension pulls of insulated building wire through conduit. Indoor and outdoor use. Light pulls in general underground electrical construction. Recommended for heavy or rugged applications and ideal for overhead and underground pulling applications. Handle longer or heavier pulling jobs such as installation of underground cables, communication lines and service lines. Designed for pulling aluminum or copper bare conductor, wire rope and insulated cables. LPJ Series LP Series UP Series PH Series PM Series SK Series Indoor and outdoor use. Pulls slack for final placement of underground cable and removes old cable. 5
3 Catalog Numbering System Standard Duty, Heavy Duty, Service Drop & Bus Drop Sample Number: SGS250 Grip Type Eye Type/Weave Type Cord Diameter Reference SG = Standard Support S = Closed Mesh Single Eye OR = Split Rod Offset Eye 22 = " 75 = " SD = Service Drop Support D = Closed Mesh Double Eye UR = Split Rod Locking Bale 23 = " 82 = " BD = Bus Drop Support O = Closed Mesh Offset Eye TS = Closed Mesh Single Eye (Heavy Duty) 30 = " 96 = " U = Closed Mesh Locking Bale TD = Closed Mesh Double Eye (Heavy Duty) 32 = " 100 = " SL = Split Lace Single Eye TSL = Split Lace Single Eye (Heavy Duty) 41 = " 125 = " DL = Split Lace Double Eye TDL = Split Lace Double Eye (Heavy Duty) 43 = " 150 = " OL = Split Lace Offset Eye S = Closed Mesh Service Drop (Bus Drop) 50 = " 175 = " UL = Split Lace Locking Bale U = Closed Mesh Locking Bale (Bus Drop) 53 = " 200 = " SR = Split Rod Single Eye 56 = " 250 = " DR = Split Rod Double Eye 63 = " 300 = " 70 = " 350 = " 73 = " 400 = " 12
4 Bus Drop Closed Mesh Single Eye & Locking Bale Grips - Bus Drop - Closed Mesh Features & Applications Bus drop grips are woven of galvanized steel wire Relieve any direct tension from the critical connection and absorb vibration and flexing Offered with either the single eye or locking bale attachment Bus drop grips are used as cable support from bus duct Optional bus drop safety spring can be used with single eye type of disassembling draw bar from coil, placing through eye loop and replacing draw bar Single eye for use when cable is vertical and for applications where cable bends Locking bale attachment fits around beam or pipe and can be locked in place BDS53 BDU53 Single Eye Grips Cord Approx. Diameter Bale Length Mesh Length Break Strength Catalog No.* " ( mm) 9" (228.6mm) 3.5" (88.9mm) 1,100 lbs. BDS " ( mm) 9" (228.6mm) 4.5" (114.3mm) 1,100 lbs. BDS " ( mm) 9" (228.6mm) 5.0" (127.0mm) 1,100 lbs. BDS " ( mm) 9" (228.6mm) 6.5" (165.1mm) 1,100 lbs. BDS " ( mm) 9" (228.6mm) 8.5" (215.9mm) 1,900lbs. BDS " ( mm) 9" (228.6mm) 8.5" (215.9mm) 1,900lbs. BDS " ( mm) 9" (228.6mm) 11.0" (279.4mm) 1,900lbs. BDS96 Locking Bale Grips Cord Approx. Diameter Bale Length Mesh Length Break Strength Catalog No.* " ( mm) 12" (304.8mm) 3.5" (88.9mm) 1,100 lbs. BDU " ( mm) 12" (304.8mm) 4.5" (114.3mm) 1,100 lbs. BDU " ( mm) 12" (304.8mm) 5.0" (127.0mm) 1,100 lbs. BDU " ( mm) 15" (381.0mm) 6.5" (165.1mm) 1,100 lbs. BDU " ( mm) 16" (406.4mm) 8.5" (215.9mm) 1,900lbs. BDU " ( mm) 16" (406.4mm) 8.5" (215.9mm) 1,900lbs. BDU " ( mm) 17" (431.8mm) 11.0" (279.4mm) 1,900lbs. BDU96 Accessories for : Service Drop & Bus Drop, Closed Mesh Grips Description Safety Spring, 40 lbs. load B2001 Safety Spring, 80 lbs. load B2002 B2001 B2002 * For stainless steel support grips, add SS" suffix to the catalog number (example, SGS50SS). To determine workload safety factor, divide approximate break strength by 10. See Page 34 for strength information. Consult Factory for price and availability. Icon Key NAFTA Compliant 22
5 Wire Mesh Grip Reference Strength Information The approximate breaking strength of any Arrow Hart wire mesh cable grip is based on working load information established in laboratory testing. In making these determinations, it is not possible to cover all applications and operating conditions. Variables such as diameters, gripping surfaces, number of items gripped, tension, movement, attachment, abrasion, corrosion, prior use, or abuse must be assessed by the user. Greater safety factors should be utilized when the conditions of application are vague or unknown. Wire mesh grips should never be used to the approximate breaking strength. For specific applications where strength and holding power are important, consult the manufacturer. To determine the recommended working load safety factor for listed cable grips, divide the approximate breaking strength by 5 for pulling grips and 10 for support grips. Arrow Hart maintains a 6 sigma safety factor for pulling grips and a 5 sigma safety factor for support grips for these recommended working loads (using average break strengths obtained on new grips under lab test conditions). Example: For pulling grips 33,000 5=6,600 lbs. which is the workload factor. Example: For support grips 10,080 10=1,008 lbs. which is the workload factor. Grip Cable Range Conversion Inches (Fractional) Inches (Decimal) Metric (mm) 1/4-23/64" " mm 3/8-31/64" " mm 1/2-39/64" " mm 5/8-47/64" " mm 3/4-63/64" " mm /64" " mm 1 1/4-1 31/64" " mm 1 1/2-1 63/64" " mm /64" " mm 2 1/2"-2 63/64" " mm /64" " mm 3 1/2-3 63/64" " mm AWG or MCM Wire Sizes This table to be used as guide only. Sizes may vary by manufacturer. Grip Cable Range Conversion AWG or MCM Approximate Diameter THHM Approximate Diameter THW " 0.162" " 0.179" " 0.199" " 0.259" " 0.323" " 0.372" " 0.401" " 0.433" " 0.508" 1/ " 0.549" 2/ " 0.595" 3/ " 0.647" 4/ " 0.705" " " 0.843" " 0.895" " 0.942" " 1.03" " 1.14" " 1.21" " 1.25" " 1.40" Diameter 34
Wire Mesh Grip Families
Wire Mesh Grip Families Complete offering of wire mesh grips built tough for industrial applications Arrow Hart supplies a broad selection of strain relief, pulling and support grips in a wide range of
More informationTCI5125 Dusttight Grip " 1.50"NPT Ins
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 TCI5125 Dusttight Grip 1.20-1.50" 1.50"NPT Ins Eaton Wiring Devices Catalog Number Manufacturer Description Weight per
More informationWire Mesh Safety Grips
Pulling Grips PS Series S PS Series grips feature a double weave of galvanized steel strands for greater strength and added mesh contact with the cable. Leviton Double Weave Pulling Grips are designed
More informationWire Mesh Safety Grips
Straight Male 90 Male Straight Female L7901 L7915 L7951 Liquid-Tight Grips U* R* Liquid-Tight Grips are woven stainless steel mesh with an anodized aluminum body for corrosion-resistance. They are used
More informationCABLE GRIPS Strain-Relief Grips Pulling Grips Support Grips
Tough and dependable, Woodhead cable grips and cord grip bodies are reliable workhorses in any plant environment. They serve as flexible holding devices used to pull cable, rope, or tubing into place,
More informationSECTION Wire Mesh Safety Grips
SECTIN Pulling Grips Low Tension Junior Duty Series Grips are indispensable tools for electricians with small job requirements. They are used to connect insulated wire bundles to pull tape or to pull wire
More informationIndex. Flexcor Wire Mesh Grips K-1
Fittings available in male straight, female straight, 45 and 90 designs for fast installation in all kinds of applications. Corrosion-resistant, die cast aluminum fitting with watertight seal (Deluxe Cord
More informationIndex. Flexcor Wire Mesh Grips K-1
Fittings available in male straight, female straight, 45 and 90 designs for fast installation in all kinds of applications. Corrosion-resistant, die cast aluminum fitting with watertight seal (Deluxe Cord
More informationWire Mesh Safety Grips
Wire esh Safety Grips Leviton are built tough to provide the strength, reliability and gripping force required for today s demanding wire management applications. They are designed to distribute stress
More informationWire Mesh. Flexible Cord. Liquid Tight Mesh Grips for Flexible Metal Conduit STR GT Series
58 We have taken our excellence and combined quality steel mesh to create the best grips in the industry. American Fittings cable grip and cord grip bodies are safe and strong in any industrial environment.
More informationWire Management Products Index
Section T Wire Management Products Index Product Page Number Kellems Wire Mesh Grips T-2 3 Pulling Grips T-4 16 DUA-PULL Grips T-6 DUA-PULL Feed Tube T-6 Overhead Multiple Strength T-7 Underground Pulling
More informationManufacturers of Quality Wire Mesh and Accessories. Support Grips Pulling Grips Splicing Grips Strain Relief Grips Deluxe Cord Grips Accessories
CAT #09 Manufacturers of Quality Wire Mesh and Accessories Support Grips Pulling Grips Splicing Grips Strain Relief Grips Deluxe Cord Grips Accessories 30 Center Parkway Plainfield, CT 06374 800-893-8397
More informationKellems Wire Management Products
Section V Kellems Wire anagement Products Index Product Page Kellems Wire esh Grips Diagram..................................V-2 Quick Reference Selection Guide for Grip Applications.................V-4
More informationLiquid Tight. Liquid Tight Connectors Reusable Fittings. Straight Connectors. Straight Connectors with Insulated Throat
Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing washer Bonds conduit to box or enclosure Corrosion resistant
More informationPulling & Support Grips
DCD Pulling Grips DCD cable grips are hand-woven by experienced tradespeople guaranteeing a consistent level of high quality. DCD grips are reverse woven, creating a loop at the end of the grip instead
More informationcable installation AnD SuPPorT MADE A WHOLE LOT EASIER TRUSTED INNOVATION q4:17 v1.7
cable installation AnD SuPPorT MADE A WHOLE LOT EASIER q4:17 v1.7 www.slingco.com TRUSTED INNOVATION a global business built on quality, innovation, service...and real family ties Business partners and
More informationAluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas
1P Arktite Heavy Duty Circuit Breaking s and s Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically operated
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
1P Arktite Heavy Duty Circuit Breaking s and Receptacles Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically
More informationArktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
More informationTaxonomies, Classifications, and Categories CIRCUIT BREAKING, COMPRESSOR, CONVEYOR, MOTOR GENERATOR SET, POLARIZED, WELDER
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AP20467S22 3W-4P 200A Plug Cooper Crouse-Hinds Catalog Number AP20467S22 Manufacturer Cooper Crouse-Hinds Description
More informationCable Grips, Swivels and Accessories
Cable Grips, Swivels and Accessories For quick and efficient cable installation and support Swann & Associates 562.492.1394 562.492.1396 fax sales@swann-associates.com 1707-B East 28th Street Signal Hill,
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically operated devices
More informationDesign PTS6-XX SERIES
Design PTS6-XX SERIES Arm Mount to Pole with Disconnect Unit H E C B J I D F A K G A. HEAVY DUTY ELECTRICAL DISCONNECT UNIT WITH MULTI-CONTACT CONNECTOR. B. DISCONNECT UNIT FITTER WITH PULLEY AND U-BOLT
More informationNATURAL HIGH IMPACT STRENGTH COPPER FREE ALUMINUM Number of Wires VAC AT 50 TO 400 HZ/250 VDC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com AR331 30 Amp Pin & Sleeve Recpt 3-W 3-P 250VDC/600vac Cooper Crouse-Hinds Catalog Number
More informationFeatures. Track Length System Length Storage Length. Active Travel. System Depth Loop Depth Tow Trolley. Intermediate Trolley
Magnetek s Electromotive Systems Mill Duty I-Beam Festoon Systems efficiently and economically deliver power and control to cranes used in a variety of severe industrial environments. Features Capacity
More informationSECTION SECTION. EATON 2014 Arrow Hart Buyers Guide
F SECTION SECTION 1 EATON 2014 Arrow Hart Buyers Guide FSECTION Cam-lok Single Pole Connectivity Table of contents Product selector guide F-3 NEMA rating system F-4 F-series F-5 E1010 F-6 E1012 F-7 F-series
More informationTubeTrace Tubing Bundles
for Custom CEMS and Analytical Umbilicals English Units Receiving, Storing and Handling... 1. Inspect materials for damage incurred during shipping. Report damages to carrier for settlement. 2. Identify
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationDEMANDING CONDITIONS, DEMAND THE BEST!
DEMANDING CONDITIONS, DEMAND THE BEST! The Superior Connection for Industrial & Processing Environments OEM Equipment Infrastructure Projects Alternative Energy Data Centers LiquidTIGHT Alloy Steel Electrical
More informationFIBER OPTIC CABLE BLOWING METHOD
FIBER OPTIC CABLE BLOWING METHOD An Efficient Method Fiber optic cable blowing is one of the most efficient and safe means of installing fiber optic cable. A pressurized blowing system uses two forces
More informationARL2042 Receptacle. Long Description. Manufacturer Information PLUGS & RECEPTACLES GTIN Manufacturers Part Number UPC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 ARL2042 Receptacle Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Descriptions
More informationYOUR SPECIALIST AROUND CABLE AND WIRE. Catalog
Catalog "upi Cable- And wirestockings, Quality based on tradition The company rupi cologne is your perfect partner for anything in Cable and rope stockings. Since 1966 we have been the market leader in
More informationSBP2 Pendant Pushbutton Stations Installation Instructions
SBP2 Pendant Pushbutton Stations Installation Instructions P.O. Box 13615 Milwaukee, WI 53213-3615 Phone: 262-783-3500 Fax: 262-783-3510 Toll free Phone (in USA): 800-288-8178 Toll free Fax (in USA): 800-298-3503
More informationSECTION SECTION SECTION EATON 2016 Arrow Hart Buyers Guide
F SECTION SECTION SECTION 1 EATON 2016 Arrow Hart Buyers Guide www.arrowhart.com /arrowhart FSECTION Cam-Lok Single Pole Connectivity Table of contents Product selector guide F-3 NEMA rating system F-4
More informationYOUR FULL LINE SOURCE FOR PVC ELECTRICAL PRODUCT
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
More informationNew dimming drivers are compatible with most wall dimmers for % light control. For non-dimming
CONSTANT VOLTAGE POWER SUPPLIES CONSTANT VOLTAGE New dimming drivers are compatible with most wall dimmers for 10-100% light control. For non-dimming applications or for use with AL-PWM-6A, use LED-DR
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationDouble Hanger Only. Sheave Diameter " 3" Double Hanger Only
32000 Series Fiber Optic s & Quadrants For pulling fiber optic cable, DCD has a special series of sheaves and quadrants that will allow the maximum possible bend radius for the application. All the sheaves
More informationAMENDMENT ELECTRIC SERVICE MANUAL 2014
AMENDMENT (Pages 20,43,50,72,74,,76,78,83,86,99) ELECTRIC SERVICE MANUAL 2014 Effective April 1, 2015 18-7 6.0 SERVICE AND SERVICE ENTRANCES (General), Continued Conductor Sizing It is recommended that
More informationPSC Terminations. Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables.
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables. Sizes are available for all shielded cables in voltage classes from 15kV through 46kV.
More informationSERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING Obtain acceptance and specific details from the local Company office. 1. Service entrance duct (see Note 1). Company
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
P Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable
More informationCABLE GRIPS & ACCESSORIES
CABLE GRIPS & ACCESSORIES QUICK AND EFFICIENT CABLE INSTALLATION AND SUPPORT 2012 Welcome to Slingco America Inc. A business focused on your needs Nick Dykins, CEO (right) Matt Dykins, President (left)
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
More informationMaximum submersible power cable length (max. cable length in feet - starter to motor)
Cable sizing charts V and 0 V, ph V ph 0 V ph 0. 0. 0 (40) 00 (0) 0 (68) 00 0 (9) 90. (8) 0 (46) 0 (7) - 0 (64) 60 (49) 880 (68) (98) 480 (46) 0 90 (8) 0* (4*) 7. 40 (04) 90 (44) 00 () () 60 (9) 480 (46)
More informationConduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationAPJ Amp Pin & Sleeve Plug 3-W 4-P 250 VDC/600 Vac
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 APJ10487 100 Amp Pin & Sleeve Plug 3-W 4-P 250 VDC/600 Vac Cooper Crouse-Hinds Catalog Number Manufacturer Description
More informationOne Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
More informationHANGERS, STRUT, AND FITTINGS SUBMITTAL
HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam
More informationOptional Bullard Hook* with return latch, with or without return spring, for added safety.
Standard Top Hook with safety latch-rigid (standard) or swivel. Optional Bullard Hook* with return latch, with or without return spring, for added safety. Optional Shur-Loc Hook* with positive lock latch
More informationFiber Optic Above-Ground) Cross-Connect Enclosure (ACE) Model ACE-200DS Installation Guide)
Fiber Optic Above-Ground) Cross-Connect Enclosure (ACE) Model ACE-200DS Installation Guide) 13536-A Figure 1. ACE-200DS Enclosure With OCM-HD Panels Content Page INTRODUCTION... 2 1 PRODUCT DESCRIPTION...
More informationL 5 L 4 X 6 ( ) ( ) F A X ( ) R E M K E. C O M
REMKE.COM Bringing You Industrial-Strength Electrical Connectors with Personalized Service, Order Flexibility & Custom Solutions This is Why You Should Partner with Remke. Remke has been manufacturing
More informationCam-Lok Single Pole Connectors
Cam-Lok Single Pole Connectors Cooper Interconnect Cam-Lok Single Pole Connectors are specially designed to provide the ultimate in reliable service, even under the most severe operating conditions. These
More informationCam-Lok Single Pole Connectivity. The industry standard for reliable service under the most severe operating conditions.
Cam-Lok Single Pole Connectivity The industry standard for reliable service under the most severe operating conditions. Cam-Lok Single Pole Connectivity Cam-Lok connectors are the industry standard Cam-Lok
More informationConductor Size 18 TO 8 AWG, 6 TO 0 AWG, 2/0 TO 4/0 AWG, 4/0 AWG TO 750 MCM (ALUMINUM/COPPER CLAD, ALUMINUM/COPPER)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 DR20022 Cable Support Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category DR20022
More informationINDUSTRIAL SPRING REELS
INDUSTRIAL SPRING REELS ELECTRICAL CABLE REEL FEATURES Heavy duty steel construction Cable reeling via action of coil springs Suitable for indoor and outdoor usage Broad range for all lengths and sizes
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationCategory # 1 - Overhead, Primary, & Secondary Conductors
City of Alexandria Bid Proposal # 2214 Open Date - November 27, 2018 Page BF1of BF7 Category # 1 - Overhead, Primary, & Secondary Conductors 1. 2801602110 17,100 LB. CABLE, 477 MCM AAC CONDUCTOR, $ - $
More informationBUILT WITH INTEGRITY
WITH INTEGRITY Let us share our wealth of knowledge accumulated over three decades. We have equipped the material handling industry across North America with some of the most resilient cranes and crane
More informationCurrent Transformer, Termination & Disconnect Cabinets WE Energies Approved
Current Transformer, Termination & Disconnect Cabinets WE Energies Approved 2 TABLE OF CONTENTS Table of Contents Current Transformer Cabinets Overhead Entry... 4 Underground Entry and Underground Exit...
More informationDistributed by Tri-State Equipment Company Inc
Distributed by Tri-State Equipment Company Inc. sales@tsoverheadcrane.com 314-869-7200 www.tsoverheadcrane.com Harrington Manual hoist products CB Hand Chain Hoist 1 2 through 100 Ton capacity Harrington
More informationManufacturing quality. Delivering service. Single Conductors DESCRIPTION: Single copper conductor, tinned stranded insulated with moisture and heat resistant, chemically cross-linked polyethylene insulation
More informationFrom simple, straight shots to pulls with multiple bends
www.greenlee.com CABLE PULLING From simple, straight shots to pulls with multiple bends and offsets, Greenlee Cable Pulling equipment saves time, increases your efficiency and safely pulls cable where
More informationCable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
More informationEngineering Information. Solenoid Valves Principles of Operation. Solenoid Valves. Direct Acting Valves (Figures 1A, 1B)
4 Engineering Information Principles of Operation A solenoid valve is a combination of two basic functional units: A solenoid (electromagnet) with its core A valve body containing one or more orifices
More informationPower-Trex. Family of Products for Temporary & Emergency Power
Power-Trex Family of Products for Temporary & Emergency Power One Source Endless Possibilities At TPC Wire & Cable Corp. we re helping customers develop custom solutions for their temporary power strategies
More informationBRONCO PHILATRON. Brand. Premium Flexible Power Cable WIRE AND CABLE * USA MANUFACTURER
BRONCO Brand TM Premium Flexible Power Cable PHILATRON WIRE AND CABLE * USA MANUFACTURER WWW.PHILATRON.COM Table of Contents BRONCO-15 Cable & Cord Description To: Bronco-15 From: Bronco-66 History: To
More informationBESTEEL Model 170 Curtain Tracks BESTEEL Model 171-N Curtain Tracks BESTEEL Model 171-R Curtain Tracks
BESTEEL Model 170 Curtain Tracks - Curtain tracks shall be of 14 gauge galvanized steel construction entirely enclosed except for slot in bottom, each half to be in one continuous piece except where splicing
More informationShock/Vibration Control Switches
Shock/Vibration Control Switches Models: VS2, VS2C, VS2EX, VS2EXR, VS2EXRB and VS94 ` Installation Instructions 00-02-0185 2013-02-01 Section 20 Please read the following information before installing.
More informationA/C Disconnects. Only $7.99 each In cases of (6) B222-60NF In cases of (10)
A/C Disconnects 60 amps Non-fused. 240v A.C. Single Phase. UL Listed Three piece construction that opens up mounting and wiring areas, reduces installation time. Terminals approved for 60*C and 75*C wire.
More informationMechanical Hoists. Catalog 1100 July Hoists - Mechanical Phone: Web: hubbellpowersystems.
Mechanical Hoists Catalog 1100 Page 1101 RATCHET HOISTS User-friendly operation and construction. Experienced operators prefer CHANCE lever hoists for longterm, dependable performance. Light-weight for
More informationVersatility: SPECIFICATIONS. POWER CABLE INSTALLATION Standard Features:
WDR505 CABLE PULLER Versatility: POWER CABLE Standard Features: Closed hydraulic circuit for stepless speed variation in both rotating directions. Negative self-acting hydraulic brake. Hydraulic dynamometer
More informationEngineering Service Specifications. Commercial Single-Phase Current Transformer Metering Schemes
Engineering Service Specifications Commercial Single-Phase Current Transformer Metering Schemes Specifications for Commercial Underground Current Transformer Metering Requirements for a Single-Phase Customer
More informationProduct Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33
SECTION V INDEX Product Description Page Number Junction Boxes......................................V-V2 Meter and Instrument Enclosures.......................V24-V Control Centers.....................................V4-V9
More information00000 Series Clevis Pin Slotted Hexagon Hex Key Recommended Corresponding Part No. Part No. Size Torque Preload SLT* SLT* HEX
00000 Series Clevis Pin All clevis pins are manufactured from heat treated 416 stainless steel to provide superior strength and wear. Hardness is between 37-40 Rc. The DCD Clevis Pin is a shouldered type
More informationGeneral Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
More informationW Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications This table shows the optional items available on the different types of enclosures shown in this
More informationSplice Trays. features and benefits. specifications. A LANscape. Solutions Product. Splice Capacity
features and benefits Metal trays powder coated Clear plastic covers Fiber loop retention Positive holding action specifications SPECIFICATION SHEET LAN-331-EN PAGE 1 Ruggedness and durability Fiber visibility
More informationArrow Hart. environment devices. Watertight, severe duty and corrosion resistant devices for harsh industrial environments
Eaton's Arrow Hart Complex environment devices Complex environment devices, severe duty and corrosion resistant devices for harsh industrial environments Arrow Hart NEMA and Non-NEMA quick reference guide
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
More informationBESTEEL 170 SERIES CURTAIN TRACKS
BESTEEL 170 SERIES CURTAIN TRACKS BL = Black Finish 2XX Series Track Systems have a black finish. Parts Included 170 (270) 170 BESTEEL CWANA code CORD OPERATED/MOTORIZED 171 (271) 171-R (271-R) 260 172
More information3M Products for Electrical Networks Wind Farm Capabilities. Leading Edge. Electrical Solutions for. Wind Farms
3M Products for Electrical Networks Wind Farm Capabilities Leading Edge Electrical Solutions for Wind Farms 3M technologies for wind farms Wind farm projects are difficult enough without the risk of construction
More informationHorsepower Ratings 240V AC 1 Phase, 2 Phase, 3 Phase, Ampere Catalog List Ship Wt.* Catalog List Ship Wt.* Indoor Type 1 Outdoor Type 3R
Safety Switches Heavy Duty 240 Volt Indoor Type Outdoor Type 3R Horsepower Ratings 240V AC Phase, 2 Phase, 3 Phase, Ampere Catalog List Ship Wt.* Catalog List Ship Wt.* 2 Wire 4 Wire 3 Wire System Rating
More informationCable pulling technology
Cable pulling technology Fish tapes/pulling rods 556 Polyester 556 Perlon 556 Nylon 556 Steel 557 Flex-O-Twist speed flex leader 557 Fibreglass cable pulling rods 557 Cable pulling systems 55 With Polyester
More informationNT-300 Series Single Circuit Track System & Accessories
NT-300 Series Single Circuit Track System & Accessories Type Project Catalog No. Lamp/Wattage PRODUCT DESCRIPTION Low profile, extruded aluminum track with 20-Amp rated flat, solid integral copper conductors.
More informationElectric Submersible Pumps
Electric Submersible Pumps Versatile pumps with a wide variety of applications Construction Starts Here www.multiquip.com Electric Submersible Pumps Bolt-on discharge port allows easy replacement Cast
More informationAUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS
AUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS The original TOMMY GATE hydraulic lift Assembling the Auxiliary Battery Box 1. Remove the cover from the auxiliary battery box by removing the two nuts and
More informationControl Circuit and Industrial Interlock
Control Circuit Connectors Overview Defined Any application where electrical connections need protection from water and/or dust entering the contacts or the wiring compartment Russellstoll Line Selections
More informationRound & Oval Heavy-Duty Connectors
Round & Oval Heavy-Duty Connectors Solutions You Can Trust Table of Contents Introduction...3 Round Connectors...4 Round Receptacle Parts...9 Oval Connectors...10 Oval Receptacle Parts...14 2 Round & Oval
More informationEPIC. Pin & Sleeve Connectors PIN & SLEEVE CONNECTORS
PIN & SLEEVE CONNECTORS Reference Pin & Sleeve Overview 461 Pin & Sleeve Products Overview 462 CEE series, MULTIMAX series, ULYSSE series, ALUPRES series Pin & Sleeve Construction 464 MULTIMAX Installation
More informationACI Hoist & Crane. Festoon System. 689 S.W. 7th Terrace Dania, FL (954) Fax (954) Toll Free A-HOIST ( )
ACI Hoist & Crane Festoon System 689 S.W. 7th Terrace Dania, FL 33004 (954) 921-1171 Fax (954) 921-7117 Toll Free 1-888-4-A-HOIST (1-888-424-6478) www.acihoist.com 2 Standard Duty C-Track Index 1. General
More informationPlanning Low Voltage Layouts
Outdoor_ransformers_Outdoor_ransformers.qxd 11-11-10 3:40 PM Page 1 1850 Wilson Avenue, oronto, Ontario, anada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104 SEION H OUDOOR H1 OUDOOR Low Voltage ransformers
More informationIn This Section. and. Fittings & Non-Metallic Rigid Conduit Fittings and Accessories. Steel City Fittings
In This Section and Steel City Overview...F-2 F-3 Thinwall Conduit (EMT)...F-4 F-9 Rigid/Intermediate Grade Conduit...F-0 7 Flexible Cord and Power Cable Connectors...F-8 Liquidtight Flexible Metal Conduit
More informationSpec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
More informationSpring-Loaded MgO Thermocouple/ Thermowell Assemblies with Connection Heads (GP04, XP04, XP06)
Operating Instructions Connection Heads (GP04, XP04, XP06) Beyond Measure Speed, Service, Solutions PYROMATION P/N: -006-SL-8HN31 IOIGP04 08/14 Choosing the right temperature sensor for each application
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically operated devices
More informationAccessories. Introduction. Cable Hangers LINE PRODUCTS TRANSMISSION
Accessories Introduction While a number of cable related accessories are available on the market, RFS components are of the highest quality and are designed to provide years of trouble-free service. Together
More information