Advantages Compact Quiet No moving parts Fits standard hose or tube Aluminum or stainless steel Eleven sizes High throughput capability

Transcription

1 MOBILE VIEW Convey parts, materials, waste - with no moving parts! High Conveying Rates! Ideal For Long Distance! Mounting Brackets Available! able! What Is The? A fast, low cost way to convey: Plastic pellets Scrap trim Textiles Bulk solids Food products Chips Paper Pills/tablets Small parts Shavings Sawdust Granules Watch the demo! Why The? EXAIR s compressed air operated connects to standard hose or tube to create a powerful in-line conveyor. The compact design features large throat diameters for maximum throughput capability. Eleven sizes in aluminum and ten in stainless steel are suited to a wide variety of transfer applications. conveyors are ideal for moving large volumes of material over long distances. A small amount of compressed air is injected through directed nozzles to produce a vacuum on one end and high output flows on the other, with instantaneous response. The material flow rate is easily controlled with a pressure regulator. An optional bracket permits easy mounting. No moving parts or electricity assures maintenance free operation. A " (51mm) transports scrap cellophane trim to a waste barrel. Applications Hopper loading Fiber tensioning Material conveying Waste/trim removal Chip removal Part transfer Filling operations Advantages Compact Quiet No moving parts Fits standard hose or tube Aluminum or stainless steel Eleven sizes High throughput capability The /2" (38mm) conveys plastic granules to the gravity feed hopper on an extruder. 141

2 How The Works Compressed air flows through the inlet (1) into an annular plenum chamber (2). It is then injected into the throat through directed nozzles (3). These jets of air create a vacuum at the intake (4) which draws material in and accelerates it through the unit (5) for conveying over long vertical or horizontal distances. Conveying Rates s are available in a number of styles, materials, and sizes. Each has a large, smooth, straight bore that allows as much material to pass through as possible. Infi nite control of the flow rate through the can be controlled by a pressure regulator. Kits include a pressure regulator that is sized properly for flow. The actual conveying rate is affected by the size, mass and geometry of the part to be conveyed along with the length, lift and number of bends in the hose, tube or pipe. These variables make it difficult to determine the exact conveying rate for any product, however, our Application Engineers can assist you by comparing the material you want to convey with something that has already been tested. s are available in many sizes in both aluminum and stainless steel. s Alum. St. St. Heavy Duty , N/A , N/A 6060, , HT6060, HT , , HT6061, HT , , HT6062, HT , , HT6063, HT , , HT6064, HT , , HT6065, HT , , HT6066, HT N/A 6088 N/A N/A Hose Size Dimensions A B C D E F G H I J K L M N O P in /8 mm in /8 mm in /4 mm in mm in mm in mm in mm in mm in mm in mm in mm /4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 142 For Technical Assistance, Call An EXAIR Application Engineer Toll Free FAX (866) techelp@exair.com

3 Performance 80 PSIG Air Vacuum (5.5 BAR) Consumption SCFM SLPM "H 2 0 kpa 6058, 6058-, , 6059-, , HT6060, 6060-, HT6060-, , HT6061, 6061-, HT6061-, , HT6062, 6062-, HT6062-, , HT6063, 6063-, HT6063-, , HT6064, 6064-, HT6064-, , , 6065-, HT6065, HT6065-, , , 6066-, HT6066, HT6066-, , , , , Kits include a, mounting bracket, filter separator and pressure regulator (with coupler). Sound levels for the individual units are not provided. The length, bends and confi guration of the hose, tube or pipe used in conjunction with the to form the complete conveying system will determine the actual sound levels (which can vary greatly). Selecting The Right is available in a wide range of sizes to fit your application. Some of the criteria used to select the proper model are: Diameter of parts being conveyed Diameter of hose or tube Rate (weight or volume) Stainless steel ( and ) or aluminum Aluminum is the economical choice for general purpose conveying. Our standard stainless steel models () offer good corrosion resistance and are ideal for food service, abrasive or corrosive applications. For critical applications including certain foods and pharmaceutical products, stainless steel models provide excellent corrosion resistance. Warning: Do not use with any material that can become an explosive mixture. Comparison Material Type Temperature Corrosion Rating Resistance Aluminum 275 F (135 C) Fair () 400 F (204 C) Good () 400 F (204 C) Excellent Stainless Steel () 900 F (482 C) Good Stainless Steel () 900 F (482 C) Excellent Heavy Duty Hardened Alloy Construction 400 F (204 C) Good Flanged () 400 F (204 C) Excellent The models are suited for temperatures up to 900 F (482 C). Frequently used for sampling hot flue gases, this Line Vac can resist back pressure from long pipe lengths with numerous bends. The Heavy Duty shown on page 150 moves the highest volumes and resists wear. A is used by a pharmaceutical company to convey pills and tablets to a packaging station. s can resist temperatures to 900 F (482 C) and are available from stock in hose or threaded models. For assistance with product selection, contact an Application Engineer at

4 Clear PVC Hose EXAIR stocks 3/8" (10mm), 1/2" (13mm), 3/4" (19mm), 1" (25mm), 1-1/4" (32mm), 1-1/2" (38mm), 2" (51mm), 2-1/2" (64mm) and 3" (76mm) I.D. PVC hose in lengths up to 50' (15.2m). Ideal for conveying applications, the hose is very flexible and has a smooth internal bore that eliminates material build up. The reinforced, heavy wall of this clear hose provides visual confirmation that the material is moving when air is supplied to the. Temperature rating is -4 to 150 F (-20 to 66 C). Special s EXAIR manufactures special s suited to specific application requirements. Configurations and materials can be made to facilitate your requirements. If you have special requirements, please contact an Application Engineer to discuss the application. The can be engineered to retrofit existing machinery. The (shown below) has special fl anges that permit direct mounting to a machine used in the manufacturing of silicon wafers for the semiconductor industry. A special 3/4" (19mm) evacuates fumes from a silicon wafer etching operation. This flanged is used to remove acidic vapors resulting from surface etching of the silicon wafer. Ordinarily, EXAIR s Air Amplifier would have been used since it moves much higher volumes of air. In this case, the was the better choice since the exhaust piping was long with many bends that would have created high back pressure. The directed nozzles of the overcame this downstream resistance. This special 1-1/2" (38mm) is made of PVDF to withstand a chloride washdown. The special flanged (shown above) is made of PVDF, a plastic that has high chemical resistance. In this case, the 1-1/2" (38mm) was regularly exposed to a chloride wash, a chemical that would corrode stainless steel. QF flanges were provided on each end to allow easy removal of the conveying hoses for cleaning purposes. This special is used to fill small packets. Filling small packets with fine powders or granulated materials such as salt or sugar is done using small tubes that are gravity fed from a hopper. This works well when the material is dry, however, moist materials would often pack the tube, blocking the flow. The special funnel shaped (shown bottom center) created a suction on the existing tube to permit continuous product flow. A special miniature used to vacuum microscopic debris measures the same size as a penny! The special miniature with barb fittings (shown above) was designed for a manufacturer of integrated circuit chips. It was used to remove microscopic debris during the chip making process. This small generated high vacuum and was the perfect configuration for the confined working space. It has also been used by another manufacturer to vacuum liquid and chips from small drilled holes. 144 For Technical Assistance, Call An EXAIR Application Engineer Toll Free FAX (866) techelp@exair.com

5 Refilling A Vibratory Bowl The Problem: A manufacturer of metal products deburrs aluminum sleeves in a vibratory bowl fi lled with abrasive media. As the parts complete the deburring cycle, they are discharged to a screened bed. The abrasive media drops through the bed and the fi nished parts roll into a box. Refi lling the bowl was a back breaking operation that required repetitious lifting of heavy buckets. The Solution: A " (51mm) was installed on the vibratory bowl. In minutes, the media was conveyed back up to the bowl through a hose, without the heavy lifting. Conveying Plastic Pellets Comment: The ability to convey the abrasive media with air was the key to success. The is easy to use, and in this case, was the best choice since it will hold up better to the abrasive media conveyed through it. The Problem: Injection molding machines transform plastic pellets into various plastic products. The pellets are gravity fed from a hopper on top of the machine. The bucket and ladder method of replenishing the hopper was inefficient and expensive. The Solution: A /4" (32mm) Kit was used to convey the pellets up to the hopper. The mounting bracket included with the kit was used to secure the to the machine. A filter assured no contamination of the plastic material and a regulator controlled the plastic flow rate. Comment: Unlike mechanical transfer systems that break down or wear out, the has no moving parts. This low cost method of conveying also gives precise control of material flow into the hopper. for Matrix Removal from Labelling Application The Problem: A manufacturer applies labels to their products. After they have been applied, there is a waste stream that is referred to as the matrix. The matrix is the release liner that labels are affi xed to in bulk format prior to being used. The normal method for taking up this waste stream was to use a winder. However, after some amount of time, the winder inevitably becomes filled. Once full, the line is stopped and the winder is manually emptied. They needed a better way to dispose of the matrix. The Solution: The presents a unique advantage in that it can pull the matrix from the machine and convey it out to a waste receptacle. This requires no winder, no stopping the line and no emptying. This solution freed up personnel for other tasks and increased production. The compact design and powerful operation of the allowed it to be placed close to the generation of scrap, trim, or waste. Its powerful conveying capacity allowed it to transport the material to a remote and central location. Comment: This application illustrates the versatility of the product line. Commonly used for hopper loading products in the plastics industry, a is also a strong performer for applications like waste/ trim removal, assembly parts conveyance, blasting media recovery, gas sampling and chip removal. Its large variety of materials and sizes makes it well suited for industrial, pharmaceutical, laboratory, high temperature and corrosive environments. No moving parts or electricity assures maintenance free operation. 1" (25mm) s remove and discard a label matrix. 145

6 Inlet/Outlet Diameter Kit s Kits - include the, mounting bracket, filter separator and pressure regulator (with coupler). Inlet/Outlet Diameter Aluminum Aluminum Kit Only s Kit Kit Kit 3/8" (10mm) N/A N/A 1/2" (13mm) N/A N/A 3/4" (19mm) HT6060 HT6060-1" (25mm) HT6061 HT /4" (32mm) HT6062 HT /2" (38mm) HT6063 HT6063-2" (51mm) HT6064 HT /2" (64mm) HT6065 HT6065-3" (76mm) HT6066 HT6066-4" (102mm) N/A N/A N/A 5" (127mm) 6088 N/A N/A N/A N/A Kit 3/8" (10mm) N/A N/A 1/2" (13mm) N/A N/A 3/4" (19mm) HT6960 HT6960-1" (25mm) HT6961 HT /4" (32mm) HT6962 HT /2" (38mm) HT6963 HT6963-2" (51mm) HT6964 HT /2" (64mm) HT6965 HT6965-3" (76mm) HT6966 HT6966-4" (102mm) N/A N/A N/A # Accessories Description Mounting Bracket for 3/8" (10mm) and 1/2" (13mm) Units Mounting Bracket for 3/4" (19mm) and 1" (25mm) Units Mounting Bracket for 1-1/4" (32mm) and 1-1/2" (38mm) Units Mounting Bracket for 2" (51mm), and 2-1/2" (64mm) Units Mounting Bracket for 3" (76mm) and 4" (102mm) Units Mounting Bracket for 5" (127mm) Unit Auto Drain Filter Separator, 3/8, 65 SCFM (1,841 SLPM) Auto Drain Filter Separator, 1/2, 90 SCFM (2,549 SLPM) Auto Drain Filter Separator, 3/4, 220 SCFM (6,230 SLPM) Oil Removal Filter, 3/8, SCFM (425-1,048 SLPM) Oil Removal Filter, 3/4, SCFM (1,416-4,248 SLPM) 1/4, 50 SCFM (1,416 SLPM) 1/2, 100 SCFM (2,832 SLPM) 3/4, 220 SCFM (6,230 SLPM) Hose is available in 10', 20', 30', 40' and 50' lengths. Select the hose model number (diameter) and indicate the length with a dash. Example: A is 1" ID Hose x 20' long Hose 3/8" ID Hose 1/2" ID Hose 3/4" ID Hose 1" ID Hose 1-1/4" ID Hose 1-1/2" ID Hose 2" ID Hose 2-1/2" ID Hose 3" ID 5" (127mm) 6988 N/A N/A N/A N/A (2) /2" (38mm) s convey rejected metal caps from a fluorescent lamp operation to a scrap bin. 1-1/4" (32mm) is mounted on a burr removal tool to suction the plastic shavings and transport them to a waste container. 146 For Technical Assistance, Call An EXAIR Application Engineer Toll Free FAX (866) techelp@exair.com

7 MOBILE VIEW Threaded Threaded 2017 Low cost conveyor uses ordinary pipe! Ideal for long distance conveying! What Is The Threaded? A fast, low cost way to convey: Plastic pellets Scrap trim Textiles Bulk solids Chips Paper Small parts Shavings Sawdust Granules Plastic color concentrate pellets are added to a plastic extrusion process. EXAIR s Threaded air operated conveyors convert ordinary pipe into a powerful conveying system for parts, scrap, trim and other bulk materials. The Threaded attaches easily to plumbing pipe couplers, making it easy to build a complete system using ordinary pipe and fittings available from any home center, hardware store or plumbers supply. Performance is the same as our standard shown on page 143. Threaded conveyors are ideal for conveying large volumes of material over long distances. They eject a small amount of compressed air to produce a vacuum on one end with high output flows on the other. Response is instantaneous. Regulating the compressed air pressure provides infi nite control of the conveying rate. s from 3/8 to 3 are available in aluminum and stainless steel, which are suited to a wide variety of conveying applications. An optional mounting bracket permits easy mounting. No moving parts or electricity assures maintenance free operation. A drawer slide manufacturer conveys ball bearings with the /4 Threaded to an assembly station. Applications Hopper loading Fiber tensioning Material conveying Waste/trim removal Chip removal Part transfer Filling operations Advantages Compact Quiet No moving parts Fits standard pipe Aluminum or stainless steel Available from stock High throughput capability A special Threaded has a smooth diameter for hose on the intake and threads on the exhaust that attach to PVC pipe. 147

8 Threaded Dimensions Threaded Performance 80 PSIG (5.5 BAR) Air Consumption Vacuum SCFM SLPM "H 2 0 kpa , , , , , , , HT141075, HT , , , HT141100, HT , , , HT141125, HT , , , HT141150, HT , , , HT141200, HT , , , , HT141250, HT , , , , HT141300, HT , s Alum. 303 St. St. St. St Heavy Duty s High Temp 303 SS High Temp SS HT HT HT HT HT HT HT HT HT HT HT HT HT HT A Pipe Size 3/8 1/2 3/ /4 1-1/ /2 Threaded Dimensions B C D E F1 F2 G H I J K L M N O P in /8 mm in /8 mm in /4 mm in /4 mm in /4 mm in /8 mm in /8 mm in /8 mm in /2 mm A Pipe Size 3/ /4 1-1/ /2 Threaded Dimensions B C D E F1 F2 G H I J K L M N O P in /4 mm in /4 mm in /4 mm in /8 mm in /8 mm in /8 mm in /2 mm For Technical Assistance, Call An EXAIR Application Engineer Toll Free FAX (866) techelp@exair.com

9 Threaded Threaded s Threaded Only Inlet/Outlet Thread Size Aluminum Threaded Only Threaded Only Threaded Only Threaded Only Threaded Only 3/ N/A N/A 1/ N/A N/A 3/ HT HT HT HT / HT HT / HT HT HT HT / HT HT HT HT Threaded Kit s Threaded Kits - include the, mounting bracket, filter separator and pressure regulator (with coupler). Inlet/Outlet Thread Size Aluminum Threaded Kit Threaded Kit Threaded Kit Threaded Kit Threaded Kit 3/ N/A N/A 1/ N/A N/A 3/ HT HT HT HT / HT HT / HT HT HT HT / HT HT HT HT Accessories # Description 6994 Mounting Bracket for 3/8 and 1/2 Threaded Units 6995 Mounting Bracket for 3/4 and 1 Threaded Units 6996 Mounting Bracket for 1-1/4 and 1-1/2 Threaded Units 6997 Mounting Bracket for 2 and 2-1/2 Threaded Units 6998 Mounting Bracket for 3 Units 9001 Auto Drain Filter Separator, 3/8, 65 SCFM (1,841 SLPM) 9005 Oil Removal Filter, 3/8, SCFM (425-1,048 SLPM) /4, 50 SCFM (1,416 SLPM) Threaded Kits include the Threaded, mounting bracket, filter separator and pressure regulator (with coupler). 149

10 Heavy Duty Heavy Duty MOBILE VIEW Our most powerful moves high volumes of material and resists wear! What Is The Heavy Duty? The Heavy Duty is EXAIR's most powerful conveyor. The appearance is similar to the standard but performance has been boosted dramatically. The Heavy Duty has been engineered to convey materials over longer vertical and horizontal distances. The hardened alloy construction helps prevent premature wear that could occur with ordinary aluminum or stainless steel s. Why The Heavy Duty? Many applications require that materials be transported over longer distances. The Heavy Duty can move more material over longer lengths. They have been designed for rugged, industrial applications. The table below gives a quick comparison of our Light Duty, standard, and the Heavy Duty models. For comparison, the test shows the 2" (51mm) model of each style conveying the same material over various lengths. Heavy Duty conveys more material in less time. Rock Salt Conveying Rate Comparison 100 Feet (30.5m) 200 Feet (61m) " (51mm) Light Duty 166 lbs/hr. (75.3 kg/hr.) N/A " (51mm) 334 lbs/hr. (151.5 kg/hr.) 85 lbs/hr. (38.6 kg/hr.) " (51mm) Heavy Duty 524 lbs/hr. (237.7 kg/hr.) 200 lbs/hr. (90.7 kg/hr.) Horizontal conveying tested at 80 PSIG (5.5 BAR) The hardened alloy construction of the Heavy Duty Threaded resists wear when conveying abrasive steel shot. Applications Hopper loading Fiber tensioning Material conveying Waste/trim removal Chip removal Part transfer Filling operations Advantages Hardened alloy construction Highest throughput capability Compact Quiet No moving parts Fits standard hose, tube and pipe Available from stock Metal parts are conveyed with the " (51mm) Heavy Duty as they drop off the edge of the conveyor. 150 For Technical Assistance, Call An EXAIR Application Engineer Toll Free FAX (866) techelp@exair.com

11 Heavy Duty Heavy Duty Performance 80 PSIG (5.5 BAR) Size Air Consumption Vacuum in mm SCFM SLPM "H 2 0 kpa Heavy Duty Threaded EXAIR s Heavy Duty Threaded air operated conveyors convert ordinary pipe into a powerful conveying system for parts, scrap, trim and other bulk materials. The engineered Heavy Duty Threaded attaches easily to ordinary pipe and fittings available from any home center, hardware store or plumbers supply. With its hardened alloy construction, the Heavy Duty Threaded withstands premature wear which could occur with aluminum and stainless steel , , , , , , , , , , , , Dimensions For Heavy Duty Dimensions, see: pg 142 Threaded pg 148 Heavy Duty Only Heavy Duty s Heavy Duty Kits - include the, mounting bracket, filter separator and pressure regulator (with coupler). Inlet/Outlet Diameter Heavy Duty Only Heavy Duty Kit Inlet/Outlet Thread Size Heavy Duty Threaded Only Heavy Duty Threaded Kit 3/4" (19mm) / " (25mm) /4" (32mm) / /2" (38mm) / " (51mm) /2" (64mm) / " (76mm) An automotive manufacturer vacuums chips from drive train differentials with a " (51mm) Heavy Duty. Heavy Duty Kits include a Heavy Duty, mounting bracket, filter separator and pressure regulator (with coupler). If you have special requirements, please contact an Application Engineer to discuss the application. # Accessories Description Mounting Bracket for 3/4" (19mm) and 1" (25mm) Units Mounting Bracket for 1-1/4" (32mm) and 1-1/2" (38mm) Units Mounting Bracket for 2" (51mm) and 2-1/2" (64mm) Units Mounting Bracket for 3" (76mm) Units Auto Drain Filter Separator, 3/8, 65 SCFM (1,841 SLPM) Auto Drain Filter Separator, 1/2, 90 SCFM (2,549 SLPM) Auto Drain Filter Separator, 3/4, 220 SCFM (6,230 SLPM) Oil Removal Filter, 3/8, SCFM (425-1,048 SLPM) Oil Removal Filter, 3/4, SCFM (1,416-4,248 SLPM) 1/4, 50 SCFM (1,416 SLPM) 1/2, 100 SCFM (2,832 SLPM) 3/4, 220 SCFM (6,230 SLPM) Hose is available in 10', 20', 30', 40' and 50' lengths. Select the hose model number (diameter) and indicate the length with a dash. Example: A is 1" ID Hose x 20' long Hose 3/4" ID Hose 1" ID Hose 1-1/4" ID Hose 1-1/2" ID Hose 2" ID Hose 2-1/2" ID Hose 3" ID 151

12 Sanitary Flange Sanitary Flange MOBILE VIEW Convey materials, parts, waste - with easy disassembly and cleanup! What Is The Sanitary Flange? EXAIR s Sanitary Flange is the best way to convey materials in systems which require frequent or mandatory cleaning. The Sanitary Flange fits within your current sanitary flange piping system and converts it into a conveyor for waste, parts and bulk materials. Why The Sanitary Flange? When your piping system requires sanitary flanges, which make it easy to dismantle and clean its components, the Sanitary Flange will suit your needs. They are made from SS to provide superior corrosion resistance and cleanliness. These flanged s limit entrapment areas where bacteria can grow and the clamp style sanitary fl anges are compatible with ISO Sanitary Flange s are designed with the same performance characteristics of EXAIR's standard and Sanitary Flange Performance Threaded s which makes them a versatile solution for your conveying needs. Conveying rates are easy to control by regulating the compressed air supply pressure. The Sanitary Flange s are available from stock in four common flange sizes, 1-1/2" (38mm), 2" (51mm), 2-1/2" (64mm) and 3" (76mm). All metal parts are made from SS. No moving parts or electricity assures maintenance free operation. 80 PSIG (5.5 BAR) Size Air Consumption Vacuum in mm SCFM SLPM "H 2 0 kpa , , , Horizontal conveying tested at 80 PSIG (5.5 BAR) Applications Material conveying Part transfer Waste/trim removal Hopper loading Filling operations Chip removal Fiber tensioning Advantages ISO 2852 compatible SS Fits standard sanitary flanges Four sizes available from stock No moving parts Compact High throughput capability Quiet 152 For Technical Assistance, Call An EXAIR Application Engineer Toll Free FAX (866) techelp@exair.com

13 Sanitary Flange Dimensions Sanitary Flange Dimensions Sanitary Flange s A B C D E F G H (air inlet) I in mm / in mm / in mm / in mm / Sanitary Flange Only Sanitary Flange s Sanitary Flange Kits - include the, mounting bracket, filter separator and pressure regulator (with coupler). Inlet/Outlet Diameter Sanitary Flange Only Sanitary Flange Kit Accessories # Description 9001 Auto Drain Filter Separator, 3/8, 65 SCFM (1,841 SLPM) 9002 Auto Drain Filter Separator, 3/4, 220 SCFM (6,230 SLPM) 9005 Oil Removal Filter, 3/8, SCFM (425-1,048 SLPM) 1-1/2" (19mm) " (25mm) /2" (32mm) " (38mm) Oil Removal Filter, 3/4, SCFM (1,416-4,248 SLPM) /4, 50 SCFM (1,416 SLPM) /4, 220 SCFM (6,230 SLPM) Drum Cover Drum Cover EXAIR s fine mesh non-woven Drum Cover is built to fit over the top of 55 or 30 gallon drums. The breathable material allows the air from a air operated conveyor to circulate, whether moving material in or out of the drum. The cover prevents contamination of your material and keeps material from escaping the drum which keeps your work environment cleaner and safer. Since it is fabricated to fit 55 or 30 gallon drums, it is the simplest of solutions when needing a containment vessel for your transferred scrap, trim, waste, parts, chips or pellets. It is suitable for conveyance hoses from ¾" through 3.4" outside diameters and comes complete with hose clamps and a durable spring buckle strap for quick and easy installation. If you have special requirements, please contact an Application Engineer to discuss the application. # Description 6850 Drum Cover Drum Cover 153

14 Light Duty Light Duty An effective way to convey small volumes of material over short distances! What Is The Light Duty? EXAIR s Light Duty is the ideal way to convey small volumes of materials over short distances. Like the shown on page 141, the Light Duty converts an ordinary hose or tube into a conveyor for scrap, trim and bulk materials. Why The Light Duty? When lower throughputs at short distances are desired, the Light Duty is a good choice. This simplified design utilizes a two-part threaded construction to provide effective conveying at a lower cost. Air consumption is reduced to a volume appropriate for moving small volumes of material at short distances. Conveying rates are easy to control by regulating the compressed air supply pressure. The Light Duty features inlet and outlet diameters common to hose and tube sizes. Eight sizes for diameters from 3/4" to 6" (19 to 152mm) are available. Standard construction is aluminum. (For corrosion resistant stainless steel models that are suitable for high temperature and food service, please see models on page 146.) No moving parts or electricity assures maintenance free operation. (If higher conveying rates or mounting brackets are desired, see the models on page 146.) The low cost " (51mm) Light Duty conveys fibers to fill pillows, stuffed animals, diapers, etc. Applications Hopper loading Fiber tensioning Material conveying Waste/trim removal Chip removal Part transfer Filling operations Advantages Compact Quiet No moving parts Fits standard hose or tube Aluminum Eight sizes Moderate throughput capability A /4" (32mm) Light Duty can fill or empty the packing peanuts from shipping cartons. 154 For Technical Assistance, Call An EXAIR Application Engineer Toll Free FAX (866) techelp@exair.com

15 Light Duty Light Duty s are available in eight sizes for diameters from 3/4" to 6" (19 to 152mm). Light Duty Dimensions # A B C D E F G in /4 mm in /4 mm in /4 mm in /8 mm in /8 mm in /8 mm in /2 mm in /2 mm Light Duty Systems Light Duty s Light Duty Only Light Duty Kits - include the Light Duty, filter separator and pressure regulator (with coupler). Inlet/Outlet Diameter Light Duty Only Light Duty Kit 3/4" (19mm) " (25mm) /4" (32mm) /2" (38mm) " (51mm) " (76mm) " (102mm) " (152mm) # Accessories Description Auto Drain Filter Separator, 3/8, 65 SCFM (1,841 SLPM) Auto Drain Filter Separator, 3/4, 220 SCFM (6,230 SLPM) Oil Removal Filter, 3/8, SCFM (425-1,048 SLPM) Oil Removal Filter, 3/4, SCFM (1,416-4,248 SLPM) 1/4, 50 SCFM (1,416 SLPM) 3/4, 220 SCFM (6,230 SLPM) Hose is available in 10', 20', 30', 40' and 50' lengths. Select the hose model number (diameter) and indicate the length with a dash. Example: A is 1" ID Hose x 20' long Hose 3/4" ID Hose 1" ID Hose 1-1/4" ID Hose 1-1/2" ID Hose 2" ID Hose 3" ID Kits include a Light Duty, filter separator and pressure regulator (with coupler). Light Duty Performance 80 PSIG (5.5 BAR) Air Consumption # SCFM SLPM , , ,270 PVC hose is available in lengths up to 50' (15.2m) and diameters up to 3" (76mm). Order EXAIR s EFC electronic flow control to minimize compressed air use. See page 7 for details. 155