The Complete System of Pipe, Valves, and Fittings for Professional Plumbers. Catalog

Transcription

1 The Complete System of Pipe, Valves, and Fittings for Professional Plumbers. Catalog

2 THE FUTURE OF PLUMBING IS Watts means water. With 125 years of experience in plumbing and heating, you can count on Watts to deliver quality. Save labor and fittings with WaterPEX. The CrimpRing fitting system is the fastest and safest way to permanently install plumbing. If you re already using PEX, but have never tried the CrimpRing system, you ll be amazed at how much faster it is than the old-style PEX expansion systems. Dry fit the fittings for fit and appearance, and then crimp into place in seconds. Pressure test the connections immediately; no need to wait until the next day. THE PASTP VS. THE FUTURE WaterPEX Pipe is: Clean. WaterPEX has earned the toughest code listings from North America s leading sanitary and tubing rating agencies. Safe. WaterPEX won t leach copper, lead, or solvents into drinking water. WaterPEX and its fittings carry the NSF certification for drinking water. Reliable. Cross-linked polyethylene tubing (PEX) has been proving itself for decades and is becoming the state-of-the-practice choice for plumbing and heating systems. WaterPEX life expectancy exceeds any metal pipe and matches any tubing on the market. CrimpRing Fitting WaterPEX Manifold Finished WaterPEX connections are made without glues, solvents, or applied heat. Assembly is clean, safe, and swift. The WaterPEX system is simple and reliable. CrimpRing Fittings Offer: The Dry-Fit Advantage. Rough in the entire system, check it out for fit and appearance, then crimp each connection for permanence. Quick and Reliable Connections. CrimpRing connections are NSF-listed brass inserts with pure copper fastening rings. When crimped with a simple hand tool, these connections form a fast, reliable, and permanent seal. Immediate Pressure Testing. After crimping, you can immediately test each fitting to well over 100 psi. No need to wait hours for connections to set and seal. The Simplicity of the CrimpRing Connection 2. The WaterPEX material is uniformly compressed between the brass ribs using a CrimpRing tool. Copper CrimpRing 1. Ring is positioned 1/8" to 1/4" from end of the pipe, directly over the ribs of fitting. 3. The result is a quality, leak-free joint.

3 Table of Contents FOR PLUMBING PROS Note: This catalog supersedes all previous WaterPEX price sheets and catalogs. For pricing, see separate WaterPEX Price Guide. Tubing Red, Blue, and White Coils and Sticks Copper Manifolds Closed x Swedged Manifolds Closed x CrimpRing Manifolds CrimpRing x CrimpRing Flow-through Manifolds Open x Swedged Base Branch Manifolds CustomCut Manifolds PlumBloc Manifolds PlumBloc Manifolds (4, 5, 6, 8, and 10 port models) PlumBloc Unions, Swivel Adapters, End Caps Circuit Outlet Caps, Brass or Poly-Alloy Swivel Fittings Stops and Valves 1/4-Turn Chrome Stops /4-Turn PEX Stops, In-line Crimp x Crimp Full-Port Ball Valves In-line Crimp x Crimp Full-Port Ball Valves with Waste Drain Brass CrimpRing Fittings CrimpRing Sweat Adapters, Crimp x NPT Adapters, CinchClamps, CrimpRings Crimp Couplings, CinchClamp Coupling Kits, PEX Coupling Kits, PEX x PB Coupling Kits Brass Tees, Crimp x Crimp Elbows, Crimp x MPT Elbows, Crimp x Sweat Elbows Drop Ear Elbows, Brass Test Plugs Poly-Alloy CrimpRing Fittings Poly-Alloy CrimpRing Couplings, Poly-Alloy CrimpRing Elbows Poly-Alloy CrimpRing x MPT Adapters, Poly-Alloy CrimpRing x MPT Elbows Poly-Alloy CrimpRing Tees, Poly-Alloy Swivel Couplings, Poly-Alloy Test Plugs Stubout Brackets and Stubout Elbows PEX Stubout Brackets and Grommets Copper Stubout Brackets, Copper Stubout Elbows Bend Supports Mid-run Bend Supports, Terminal Bend Supports Supply Lines and Fittings WaterPEX Risers (Faucet/Water Closet) WaterPEX Riser Nuts (Faucet/Water Closet) Faucet/Water Closet Connections WaterPEX Tools Basic Tubing Cutter, Professional Tubing Cutter, PEX Unwinder, CinchTool RingMaster CrimpRing Tool, CrimpAll Tool Kit Replacement CrimpAll and RingMaster Parts, CrimpMaster CrimpRing Tool Electric Crimping Tool Kits and Accessories Go/No-Go Gauge WaterPEX Fasteners SnapClip StrapDown, ClipRail, ClipStop, Universal Manifold Bracket WaterPEX Accessories Washing Machine WaterOFF Control Center, Washing Machine Control Valve Washing Machine Valve and Enclosure, Ice Maker Valve and Enclosure

4 Page 2 WaterPEX Tubing WaterPEX is a cross-linked polyethylene tubing manufactured without an oxygen barrier. All sizes are manufactured in accordance with American Standard Testing Methods F-876 and F-877 to SDR-9 dimensional standards. It is listed by the National Sanitation Foundation NSF-61 for use in potable water systems. WaterPEX labeled NSF CL-R meets the requirements for use in chlorinated domestic continuous recirculation systems. WaterPEX is also listed by the International Code Council Evaluation Service (ICC-ES, successor to ICBO), the International Association of Plumbing and Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code symbol. WaterPEX is tested and certified to the Canadian Standard Association (CSA) standard B WaterPEX Tubing Red, Blue, and White Coils DESCRIPTION MODEL NUMBER ORDER NUMBER WEIGHT Red and blue WaterPEX tubing, in both coils and sticks. White WaterPEX 3/8" WaterPEX x 100' Coil, Red P R lbs. 3/8" WaterPEX x 500' Coil, Red P R lbs. 1/2" WaterPEX x 100' Coil, Red P R lbs. 1/2" WaterPEX x 500' Coil, Red P R lbs. 1/2" WaterPEX x 1000' Coil, Red P R lbs. 3/4" WaterPEX x 100' Coil, Red P R lbs. 3/4" WaterPEX x 500' Coil, Red P R lbs. 3/4" WaterPEX x 1000' Coil, Red P R lbs. 3/8" WaterPEX x 100' Coil, Blue P B lbs. 3/8" WaterPEX x 500' Coil, Blue P B lbs. 1/2" WaterPEX x 100' Coil, Blue P B lbs. 1/2" WaterPEX x 500' Coil, Blue P B lbs. 1/2" WaterPEX x 1000' Coil, Blue P B lbs. 3/4" WaterPEX x 100' Coil, Blue P B lbs. 3/4" WaterPEX x 500' Coil, Blue P B lbs. 3/4" WaterPEX x 1000' Coil, Blue P B lbs. 1/4" WaterPEX x 100' Coil, White P W lbs. 3/8" WaterPEX x 100' Coil, White P W lbs. 3/8" WaterPEX x 500' Coil, White P W lbs. 1/2" WaterPEX x 100' Coil, White P W lbs. 1/2" WaterPEX x 500' Coil, White P W lbs. 1/2" WaterPEX x 1000' Coil, White P W lbs. 3/4" WaterPEX x 100' Coil, White P W lbs. 3/4" WaterPEX x 500' Coil, White P W lbs. 3/4" WaterPEX x 1000' Coil, White P W lbs. 1" WaterPEX x 100' Coil, White P W lbs. 1" WaterPEX x 500' Coil, White P W lbs. 1-1/4" WaterPEX x 100' Coil, White PO W lbs. 1-1/4" WaterPEX x 300' Coil, White PO W lbs. WaterPEX Tubing Red, Blue, and White 20' Sticks DESCRIPTION MODEL NUMBER ORDER NUMBER WEIGHT 1/2" WaterPEX x 20' Stick, Bundle of 50 Sticks, Red P R lbs. 3/4" WaterPEX x 20' Stick, Bundle of 25 Sticks, Red P R lbs. 1/2" WaterPEX x 20' Stick, Bundle of 50 Sticks, Blue P B lbs. 3/4" WaterPEX x 20' Stick, Bundle of 25 Sticks, Blue P B lbs. 1/2" WaterPEX x 20' Stick, Bundle of 50 Sticks, White P W lbs. 3/4" WaterPEX x 20' Stick, Bundle of 25 Sticks, White P W lbs. 1" WaterPEX x 20' Stick, Bundle of 5 Sticks, White PO W lbs. 1-1/4" WaterPEX x 20; Stick, Bundle of 5 Sticks, White PO W lbs.

5 Page 3 Copper Manifolds (with Brass Fittings and Ball Valves) Copper manifolds are available in five styles, with or without ball valves. The ends of the manifold trunks are either open, closed, or supplied with 3/4" crimp fittings. Manifolds are made of type L copper. All fittings are brass and are brazed to the copper trunk. Order copper CrimpRings separately. Closed Closed Brass fittings Brass Mini Ball Valves Swedged to 1" Closed End x 1" Swedged End Manifolds 1" diameter manifold trunks are closed at one end and swedged to accept 1" copper at the other. Available with 3/8" and 1/2" brass CrimpRing fittings, with or without 1/4-turn brass mini ball valves (MBV), in sizes from M-3 to M-12. Branches are 2" o.c. Manifolds are sold individually. Order one for hot and one for cold. Without Mini Ball Valves (MBVs) Copper M-3, Closed x Swedged, 3/8" CrimpRing Fittings 1 PL lbs. Copper M-4, Closed x Swedged, 3/8" CrimpRing Fittings 1 PL lbs. Copper M-6, Closed x Swedged, 3/8" CrimpRing Fittings 1 PL lbs. Copper M-8, Closed x Swedged, 3/8" CrimpRing Fittings 1 PL lbs. Copper M-10, Closed x Swedged, 3/8" Crimpring Fittings 1 PL lbs. Copper M-12, Closed x Swedged, 3/8" CrimpRing Fittings 1 PL lbs. With Mini Ball Valves (MBVs) Copper M-3, Closed x Swedged, 3/8" CrimpRing Fittings w/mbv 1 PL206223BV lbs. Copper M-4, Closed x Swedged, 3/8" CrimpRing Fittings w/mbv 1 PL206224BV lbs. Copper M-6, Closed x Swedged, 3/8" CrimpRing Fittings w/mbv 1 PL206226BV lbs. Copper M-8, Closed x Swedged, 3/8" CrimpRing Fittings w/mbv 1 PL206228BV lbs. Copper M-10, Closed x Swedged, 3/8" CrimpRing Fittings w/mbv 1 PL BV lbs. Copper M-12, Closed x Swedged, 3/8" CrimpRing Fittings w/mbv 1 PL BV lbs. Without Mini Ball Valves (MBVs) Copper M-3, Closed x Swedged, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-4, Closed x Swedged, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-6, Closed x Swedged, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-8, Closed x Swedged, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-10, Closed x Swedged, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-12, Closed x Swedged, 1/2" CrimpRing Fittings 1 PL lbs. With Mini Ball Valves (MBVs) Copper M-3, Closed x Swedged, 1/2" CrimpRing Fittings w/mbv 1 PL206233BV lbs. Copper M-4, Closed x Swedged, 1/2" CrimpRing Fittings w/mbv 1 PL206234BV lbs. Copper M-6, Closed x Swedged, 1/2" CrimpRing Fittings w/mbv 1 PL206236BV lbs. Copper M-8, Closed x Swedged, 1/2" CrimpRing Fittings w/mbv 1 PL206238BV lbs. Copper M-10, Closed x Swedged, 1/2" CrimpRing Fittings w/mbv 1 PL BV lbs. Copper M-12, Closed x Swedged, 1/2" CrimpRing Fittings w/mbv 1 PL BV lbs.

6 Page 4 Copper Manifolds (with Brass Fittings and Ball Valves) Closed Brass fittings Closed Brass Mini Ball Valves 3/4" CrimpRing fitting Closed End x 3/4" CrimpRing End Manifolds 1" diameter manifold trunks are closed at one end and have a 3/4" brass CrimpRing fitting at the supply end. Available with 1/2" brass CrimpRing fittings, with or without 1/4-turn brass mini ball valves (MBV), in sizes from M-3 to M-12. Branches are 2" o.c. Manifolds are sold individually. Order one for hot and one for cold. MODEL ORDER Without Mini Ball Valves (MBVs) Copper M-3, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-4, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-6, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-8, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-10, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-12, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. With Mini Ball Valves (MBVs) Copper M-3, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL154303BV lbs. Copper M-4, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL154304BV lbs. Copper M-6, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL154306BV lbs. Copper M-8, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL154308BV lbs. Copper M-10, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL154310BV lbs. Copper M-12, Closed x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL154312BV lbs. Brass fittings 3/4" CrimpRing fitting 3/4" CrimpRing fitting Brass Mini Ball Valves 3/4" CrimpRing End x 3/4" CrimpRing End Flow-Through Manifolds Flow-through manifolds have 3/4" brass CrimpRing fittings at both ends. This allows water supply to continue through the manifold to the next group of fixtures. Available with 1/2" brass CrimpRing fittings, with or without 1/4-turn brass mini ball valves (MBV), in sizes from M-3 to M-12. Branches are 2" o.c. Manifolds are sold individually. Order one for hot and one for cold. MODEL ORDER Without Mini Ball Valves (MBVs) Copper M-3, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-4, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-6, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-8, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-10, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. Copper M-12, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings 1 PL lbs. With Mini Ball Valves (MBVs) Copper M-3, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL153303BV lbs. Copper M-4, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL153304BV lbs. Copper M-6, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL153306BV lbs. Copper M-8, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL153308BV lbs. Copper M-10, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL153310BV lbs. Copper M-12, 3/4" Crimp x 3/4" Crimp, 1/2" CrimpRing Fittings w/mbv 1 PL153312BV lbs.

7 Open Copper Manifolds (with Brass Fittings and Ball Valves) Brass Base Branches Swedged to 1" Open End x 1" Swedged End Manifolds MODEL ORDER Copper M-2, Open x Swedged, 1/2" Base Branch Fittings 1 PL lbs. Copper M-3, Open x Swedged, 1/2" Base Branch Fittings 1 PL lbs. Copper M-4, Open x Swedged, 1/2" Base Branch Fittings 1 PL lbs. Page 5 These manifolds are swedged at one end and open at the other. They are supplied with 1/2" nominal brass base branch fittings to accept fittings or ball valves. Manifolds can be sweat together to make any combination needed. CustomCut Copper Manifolds (with Brass Fittings and Ball Valves) CustomCuts are designed to be cut up in the field. Cut off five branches for a 5-branch manifold, seven for a 7-branch manifold, etc. All CustomCuts are 4' long with 16 fittings spaced 3" apart, so a pipe cutter can fit between the branches. CustomCuts come with or without MBVs, with either 3/8" crimp fittings, 1/2" crimp fittings, or with 1/2" base branches to accept any type of 1/2" nominal crimp fitting or Watts Radiant Mini Ball Valve (MBV). All fittings are brass. MODEL ORDER Without Mini Ball Valves (MBVs) M-16, Open x Open, 3/8" CrimpRing Fittings 1 PL lbs. M-16, Open x Open, 1/2" CrimpRing Fittings 1 PL lbs. M-16, Open x Open, 1/2" Base Branch Fittings 1 PL lbs. With Mini Ball Valves (MBVs) M-16, Open x Open, 3/8" CrimpRing Fittings w/mbv 1 PL204237BV lbs. M-16, Open x Open, 1/2" CrimpRing Fittings w/mbv 1 PL204250BV lbs. M-16, Open x Open, 1/2" Base Branch Fittings w/mbv 1 PL205250BV lbs. Mini Ball Valve (MBV) Universal Manifold Mounting Brackets Hot water flow-through manifold 3/4" crimp fitting 1/4-turn Mini Ball Valves CrimpRings Cold water flow-through manifold Putting it Together. Manifolds are the heart of the WaterPEX plumbing system. Choosing the correct manifold is important. The photograph at left shows an example of a flowthrough manifold configuration and some of the WaterPEX components that make it work. NOTE: All Watts Radiant copper manifolds are made with brass fittings and brass ball valves. 1/4-turn Mini Ball Valves

8 Page 6 PlumBloc Manifolds PlumBlocs are a great alternative to standard copper manifolds. All PlumBlocs come with built-in circuit isolation valves, valve key, mounting brackets, and red and blue indicator disks for identifying either hot or cold water supply. Manifolds can be fitted with End Caps and either Crimp or NPT transitional fittings. PlumBlocs are made of engineered polysulfone (PLS) and are listed to NSF-pw. (Purchase CrimpRing fittings and other accessories separately.) Use the Valve Key to open or close individual PlumBloc circuits. Note: Do not use these manifolds for hydronic heating systems. Valve Key MODEL ORDER 3-Port PlumBloc, for 3/8" or 1/2" PEX 1 PV lbs. 4-Port PlumBloc, for 3/8" or 1/2" PEX 1 PV lbs. 5-Port PlumBloc, for 3/8" or 1/2" PEX 1 PV lbs. 6-Port PlumBloc, for 3/8" or 1/2" PEX 1 PV lbs. 8-Port PlumBloc, for 3/8" or 1/2" PEX 1 PV lbs. 10-Port PlumBloc, for 3/8" or 1/2" PEX 1 PV lbs. PlumBloc Transitional Fittings. For transitioning to supply lines and other PlumBlocs. Manifold Union MODEL ORDER Manifold Union, PlumBloc x PlumBloc (PLS) 1 PV lb. 3/4" PEX Crimp x PlumBloc Swivel Adapter (PLS) 1 PV lb. 3/4" MNPT x PlumBloc Swivel (brass) 1 PV lb. 1" MNPT x PlumBloc Swivel (brass) 1 PV lb. Manifold End Cap 1 PV lb. Circuit Outlet Cap, 1/2" FPT (for unused ports) 1 PV lbs. Valve Key (replacement) 1 PV lb. 3/4" Crimp x PlumBloc Swivel Adapter 3/4" MNPT x PlumBloc Swivel 1" MNPT x PlumBloc Swivel Manifold End Cap Circuit Outlet Cap Valve Key PlumBloc Circuit Outlet Brass Fittings. For connecting WaterPEX to PlumBlocs (purchase CrimpRings separately). MODEL ORDER 3/8" Brass CrimpRing x 1/2" FPT, Swivel 10 PFC lbs. 1/2" Brass CrimpRing x 1/2" FPT, Swivel 10 PFC lbs. PlumBloc Circuit Outlet Poly-Alloy Fittings. For connecting WaterPEX to PlumBlocs (purchase CrimpRings separately). MODEL ORDER 3/8" Poly-Alloy CrimpRing x 1/2" FPT, Swivel 10 PASC lbs. 1/2" Poly-Alloy CrimpRing x 1/2" FPT, Swivel 10 PASC lbs.

9 Page 7 Stops and Valves 1/4-Turn Chrome Stops. Ever snapped the stem off a plastic stop? These solid brass valves (even the stem is brass) open or shut in a 1/4 turn. Trusted Watts quality in a chrome plated ball valve. Best choice for longevity and frequent use. Sweat, compression, or crimp fittings provide for a quick, reliable connection. 1/2" Crimp x 3/8" OD Comp. 10 PCBC60SPEX lbs. Straight Stop 1/2" Crimp x 3/8" OD Comp. 10 PCBC60PEX lbs. Angle Stop 1/2" Crimp x 1/2" Crimp 10 PCSS lbs. Straight Stop 1/2" Copper Sweat x 3/8" OD Comp. 10 PCBC70SPEX lbs. Straight Stop 1/2" Copper Sweat x 3/8" OD Comp. 10 PCBC70PEX lbs. Angle Stop 5/8" OD Comp. x 3/8" OD Comp. 10 PCBC80SPEX lbs. Straight Stop 5/8" OD Comp. x 3/8" OD Comp. 10 PCBC80PEX lbs. Angle Stop 1/4-turn Crimp x Compression Chrome Angle Stops Risers Brass Tee Stubout Bracket with Grommet Putting it Together. The perfect bathroom setup. The photograph at left shows an example of a real-world PEX configuration for a bathroom sink and some of the WaterPEX components that make it work.

10 Page 8 Stops and Valves PEX Stops. These 1/4-turn Stops include insert stiffeners and compression rings for use with 1/2" WaterPEX. Brass or chrome sleeves (sold separately) slide over 1/2" WaterPEX to give a sleek, finished appearance all the way to the wall. Straight Stop Insert Stiffener Compression Ring Compression Nut Chromed or Brass Sleeve 1/2" WaterPEX Tubing (connects to 5/8" side of valve) Angle Stop 5/8" OD x 3/8" OD Comp. PEX Straight Stop 10 PCBC90SPEX lbs. 5/8" OD x 3/8" OD Comp. PEX Angle Stop 10 PCBC90PEX lbs. Chromed Sleeves (5" long x 19/32" OD) 10 PCS33X lb. Extra Insert Stiffeners (for 5/8" comp. fitting) 10 PIS33X lb. Extra Compression Rings (for 5/8" comp. fitting) 10 PCR33X lb. In-line Crimp x Crimp Full-Port Ball Valves. No soldering, no threading, and no waiting. Just slip a length of WaterPEX pipe over the barbs, and crimp into place. Solid, leak-proof connection completed in a matter of seconds. 1/2" Crimp x 1/2" Crimp Ball Valve 1 P lb. 3/4" Crimp x 3/4" Crimp Ball Valve 1 P lb. 1" Crimp x 1" Crimp Ball Valve 1 P lbs. In-line Crimp x Crimp Full-Port Ball Valves with Waste Drain. This valve is the same as the Crimp x Crimp full-port ball valve, but it includes a waste drain for draining with the valve in the closed position. Waste Drain WEIGHT 1/2" Crimp x 1/2" Crimp Ball Valve 1 P lb. with Waste Drain 3/4" Crimp x 3/4" Crimp Ball Valve 1 P lb. with Waste Drain

11 Page 9 Brass CrimpRing Fittings Brass CrimpRing Sweat Adapters. Sweat adapters onto a copper pipe to transition to WaterPEX supply lines. Male Sweat x Crimp Adapter Female Sweat x Crimp Adapter MODEL ORDER Adapter, 1/2" Male Sweat x 3/8" Crimp, Brass 10 PC637X lb. Adapter, 1/2" Male Sweat x 1/2" Crimp, Brass 10 PC650X lb. Adapter, 3/4" Male Sweat x 3/4" Crimp, Brass 10 PC675X lb. Adapter, 1" Male Sweat x 1" Crimp, Brass 10 PC700X lbs. Adapter, 1" Male Sweat x 1-1/4" Crimp, Brass 10 PC685X lbs. Adapter, 1/2" Female Sweat x 1/2" Crimp, Brass 10 PC750X lb. Adapter, 3/4" Female Sweat x 3/4" Crimp, Brass 10 PC775X lbs. Adapter, 1" Female Sweat x 1" Crimp, Brass 10 PC780X lbs. Adapter, 1" Female Sweat x 1-1/4" Crimp, Brass 10 PC785X lbs. Brass CrimpRing x Threaded Adapters. Thread adapters into the appropriate NPT fitting. Crimp x MPT Threaded Adapter Crimp x FPT Threaded Adapter Tab Adapter, 3/8" Crimp x 1/2" MPT, Brass 10 PCMC23X lb. Adapter, 1/2" Crimp x 1/2" MPT, Brass 10 PCMC33X lb. Adapter, 1/2" Crimp x 3/4" MPT, Brass 10 PCMC34X lbs. Adapter, 3/4" Crimp x 1/2" MPT, Brass 10 PCMC43X lb. Adapter, 3/4" Crimp x 3/4" MPT, Brass 10 PCMC44X lbs. Adapter, 3/4" Crimp x 1" MPT, Brass 10 PCMC45X lbs. Adapter, 1" Crimp x 3/4" MPT, Brass 10 PCMC54X lbs. Adapter, 1" Crimp x 1" MPT, Brass 10 PCMC55X lbs. Adapter, 1-1/4" Crimp x 1" MPT, Brass 10 PCMC75X lbs. Adapter, 1/2" Crimp x 1/2" FPT, Brass 10 PCUFC33X lb. Adapter, 3/4" Crimp x 3/4" FPT, Brass 10 PCUFC44X lbs. Stainless Steel CinchClamps. Perfect for connecting PEX to crimp-type fittings in hard-to-reach spaces. Simply pinch the tab closed with the CinchTool to make the connection. CinchClamps are made from corrosion-resistant annealed 304 stainless steel (meets ASTM F2098). 3/8" CinchClamps 10 PCCC2X lb. 3/8" CinchClamps 100 PCCC2X lb. 1/2" CinchClamps 10 PCCC3X lb. 1/2" CinchClamps 100 PCCC3X lb. 3/4" CinchClamps 10 PCCC4X lbs. 3/4" CinchClamps 100 PCCC4X lbs. 1" CinchClamps 10 PCCC5X lbs. 1" CinchClamps 100 PCCC5X lbs. Copper PEX CrimpRings. Proven by 20 years of experience, annealed copper CrimpRings provide a quick, safe, and reliable connection to WaterPEX SDR-9 pipe. Simply slide one of these CrimpRings over the WaterPEX pipe and crimp into place with the crimp tool. 3/8" CrimpRings 100 PCCR2X lb. 1/2" CrimpRings 100 PCCR3X lb. 3/4" CrimpRings 100 PCCR4X lbs. 1" CrimpRings 25 PCCR5X lb. 1" CrimpRings 100 PCCR5X lbs. 1-1/4" CrimpRings 25 PCCR7X lb. 1-1/4" CrimpRings 100 PCCR7X lbs.

12 Page 10 Brass CrimpRing Fittings Brass PEX CrimpRing Couplings. For making field repairs or continuing a run. Order CrimpRings separately. PEX x PEX MODEL ORDER Coupling, 3/8" Crimp x 3/8" Crimp, Brass 10 PCC22X lb. Coupling, 1/2" Crimp x 3/8" Crimp, Reducer, Brass 10 PCC32X lb. Coupling, 1/2" Crimp x 1/2" Crimp, Brass 10 PCC33X lb. Coupling, 3/4" Crimp x 1/2" Crimp, Reducer, Brass 10 PCC43X lbs. Coupling, 3/4" Crimp x 3/4" Crimp, Brass 10 PCC44X lbs. Coupling, 1" Crimp x 3/4" Crimp, Reducer, Brass 10 PCC54X lbs. Coupling, 1" Crimp x 1" Crimp, Brass 10 PCC55X lbs. Coupling, 1-1/4" Crimp x 1-1/4" Crimp, Brass 10 PCC77X lbs. Coupling, 1" Crimp x 1-1/4" Crimp, Reducer, Brass 10 PCC57X lbs. PEX x PEX PEX CinchClamp Coupling Kits. For making WaterPEX repairs in the field. DESCRIPTION MODEL NUMBER ORDER NUMBER WEIGHT 3/8" Coupling Kit (2 Brass Couplings, 4 CinchClamps) PCCCA2K lb. 1/2" Coupling Kit (2 Brass Couplings, 4 CinchClamps) PCCCA3K lb. 3/4" Coupling Kit (2 Brass Couplings, 4 CinchClamps) PCCCA4K lb. 1" Coupling Kit (2 Brass Couplings, 4 CinchClamps) PCCCA5K lb. PEX x PEX PEX CrimpRing Coupling Kits. For making WaterPEX repairs in the field. DESCRIPTION MODEL NUMBER ORDER NUMBER WEIGHT 3/8" Coupling Kit (2 Brass Couplings, 4 Copper CrimpRings) PCCA2K lb. 1/2" Coupling Kit (2 Brass Couplings, 4 Copper CrimpRings) PCCA3K lb. 3/4" Coupling Kit (2 Brass Couplings, 4 Copper CrimpRings) PCCA4K lb. 1" Coupling Kit (2 Brass Couplings, 4 Copper CrimpRings) PCCA5K lb. 1-1/4" Coupling Kit (2 Brass Couplings, 4 Copper CrimpRings) PCCA7K lb. Brass PEX x Polybutylene (PB) Transition Couplings Kits. For transitioning from polybutylene pipe to WaterPEX. Polybutylene and PEX CrimpRings are included. PEX x PB Coupling Kit, 3/8" PB x 3/8" PEX 10 PCPB22X lb. Coupling Kit, 1/2" PB x 1/2" PEX 10 PCPB33X lb. Coupling Kit, 3/4" PB x 3/4" PEX 10 PCPB44X lb. Coupling Kit, 1" PB x 1" PEX 10 PCPB55X lb.

13 Page 11 Brass CrimpRing Fittings Run Run Branch Brass Tees (Run x Run x Branch). Used for making directional changes in potable systems. Run Run Branch Tee, 3/8" Crimp x 3/8" Crimp x 3/8" Crimp, Brass 10 PCT222X lb. Tee, 1/2" Crimp x 1/2" Crimp x 3/8" Crimp, Brass 10 PCT332X lb. Tee, 1/2" Crimp x 3/8" Crimp x 1/2" Crimp, Brass 10 PCT323X lb. Tee, 1/2" Crimp x 3/8" Crimp x 3/8" Crimp, Brass 10 PCT322X lb. Tee, 1/2" Crimp x 1/2" Crimp x 1/2" Crimp, Brass 10 PCT333X lb. Tee, 1/2" Crimp x 1/2" Crimp x 3/4" Crimp, Brass 10 PCT334X lb. Tee, 3/4" Crimp x 1/2" Crimp x 1/2" Crimp, Brass 10 PCT433X lb. Tee, 3/4" Crimp x 1/2" Crimp x 3/4" Crimp, Brass 10 PCT434X lbs. Tee, 3/4" Crimp x 3/4" Crimp x 3/8" Crimp, Brass 10 PCT442X lb. Tee, 3/4" Crimp x 3/4" Crimp x 1/2" Crimp, Brass 10 PCT443X lbs. Tee, 3/4" Crimp x 3/4" Crimp x 3/4" Crimp, Brass 10 PCT444X lbs. Tee, 3/4" Crimp x 3/4" Crimp x 1" Crimp, Brass 10 PCT445X lbs. Tee, 1" Crimp x 3/4" Crimp x 3/4" Crimp, Brass 10 PCT544X lbs. Tee, 1" Crimp x 1" Crimp x 1/2" Crimp, Brass 10 PCT553X lbs. Tee, 1" Crimp x 1" Crimp x 3/4" Crimp, Brass 10 PCT554X lbs. Tee, 1" Crimp x 1" Crimp x 1" Crimp, Brass 10 PCT555X lbs. Brass Elbows Crimp x Crimp. Used to make a 90 change between WaterPEX. Elbow, 3/8" Crimp x 3/8" Crimp, Brass 10 PCE22X lb. Elbow, 1/2" Crimp x 1/2" Crimp, Brass 10 PCE33X lb. Elbow, 3/4" Crimp x 1/2" Crimp, Brass 10 PCE43X lb. Elbow, 3/4" Crimp x 3/4" Crimp, Brass 10 PCE44X lbs. Elbow, 1" Crimp x 1" Crimp, Brass 10 PCE55X lbs. Brass Elbows Crimp x MPT. Used to make a 90 change between WaterPEX and threaded pipe. Elbow, 1/2" Crimp x 3/8" MPT, Brass 10 PCE32BTX lb. Elbow, 1/2" Crimp x 1/2" MPT, Brass 10 PCE33BTX lb. Elbow, 1/2" Crimp x 3/4" MPT, Brass 10 PCE34BTX lbs. Elbow, 3/4" Crimp x 3/4" MPT, Brass 10 PCE44BTX lbs. CrimpRing x Sweat Elbows. Use these elbows when making tight turns. Elbow, 1/2" Brass Crimp x 3/4" Fitting 10 PCE lbs. Elbow, 3/4" Brass Crimp x 3/4" Fitting 10 PCE lbs.

14 Page 12 Brass CrimpRing Fittings 3-eared Elbow 2-eared Elbow Drop Ear Elbows. For making 90 change between WaterPEX and threaded pipe. 3/8" Crimp x 1/2" FPT 2-ear 1 PCDE23BFX lb. 1/2" Crimp x 1/2" FPT 2-ear, Brass 1 PCDE33BFX lbs. 1/2" Crimp x 1/2" FPT 3-ear, Brass 1 PCDE33BFX lb. 3/4" Crimp x 1/2" FPT 2-ear, Brass 1 PCDE43BFX lb. 3/4" Crimp x 3/4" FPT 2-ear, Brass 1 PCDE44BFX lbs. Brass CrimpRing Test Plugs. Used for pressure-testing the system. Test Plug, 3/8" Crimp, Brass 10 PCP2X lb. Test Plug, 1/2" Crimp, Brass 10 PCP3X lb. Test Plug, 3/4" Crimp, Brass 10 PCP4X lbs. Test Plug, 1" Crimp, Brass 10 PCP5X lbs. Poly-Alloy Crimp Fittings Poly-Alloy CrimpRing fittings are a perfect match for Watts WaterPEX. These fittings are produced from an engineered thermoplastic polymer called ACUDEL. ACUDEL resin offers many improved performance characteristics that make it an excellent choice for molded components installed in the demanding environment of a hot and cold-water plumbing system. Poly-Alloy CrimpRing fittings are made to ASTM F2169 and F877 standards. They have the NSF-pw rating and are certified to Canadian Standard Association B Poly-Alloy CrimpRing Couplings. For making field repairs or continuing a run. Order CrimpRings separately. MODEL ORDER Coupling, PLS, 1/2" Crimp x 1/2" Crimp 10 PAC lb. Coupling, Poly-Alloy, Reducer, 3/4" Crimp x 1/2" Crimp 10 PAC lb. Coupling, PLS, 3/4" Crimp x 3/4" Crimp 10 PAC lb. Coupling, PLS, Reducer, 1" Crimp x 3/4" Crimp 10 PAC lb. Coupling, PLS, 1" Crimp x 1" Crimp 10 PAC lb. Poly-Alloy CrimpRing Elbows. Used to make a 90 change between WaterPEX. MODEL ORDER Elbow, Poly-Alloy, 1/2" Crimp x 1/2" Crimp 10 PAE lb. Elbow, Poly-Alloy, 3/4" Crimp x 1/2" Crimp 10 PAE lb. Elbow, Poly-Alloy, 3/4" Crimp x 3/4" Crimp 10 PAE lb. Elbow, Poly-Alloy, 1" Crimp x 1" Crimp 10 PAE lb.

15 Page 13 Poly-Alloy Crimp Fittings Poly-Alloy CrimpRing x MPT Adapters. Thread adapters into the appropriate NPT fitting. MODEL ORDER Adapter, Poly-Alloy, 1/2" Crimp x 1/2" MPT 10 PAMC lb. Adapter, Poly-Alloy, 1/2" Crimp x 3/4" MPT 10 PAMC lb. Adapter, Poly-Alloy, 3/4" Crimp x 3/4" MPT 10 PAMC lb. Poly-Alloy CrimpRing x MPT Elbows. Used to make a 90 change between WaterPEX and threaded pipe. MODEL ORDER Elbow, Poly-Alloy, 1/2" Crimp x 1/2" MPT 10 PAME lb. Elbow, Poly-Alloy, 3/4" Crimp x 1/2" MPT 10 PAME lb. Elbow, Poly-Alloy, 3/4" Crimp x 3/4" MPT 10 PAME lb. Run Branch Run Poly-Alloy CrimpRing Tees. Used for making directional changes in potable systems. MODEL ORDER Run Run Branch Tee, Poly-Alloy, 1/2" Crimp x 1/2" Crimp x 1/2" Crimp 10 PAT lb. Tee, Poly-Alloy, 1/2" Crimp x 1/2" Crimp x 3/4" Crimp 10 PAT lb. Tee, Poly-Alloy, 3/4" Crimp x 3/4" Crimp x 3/4" Crimp 10 PAT lb. Tee, Poly-Alloy, 3/4" Crimp x 3/4" Crimp x 1/2" Crimp 10 PAT lb. Tee, Poly-Alloy, 3/4" Crimp x 1/2" Crimp x 3/4" Crimp 10 PAT lb. Tee, Poly-Alloy, 3/4" Crimp x 1/2" Crimp x 1/2" Crimp 10 PAT lb. Tee, Poly-Alloy, Reducer, 3/4" Crimp x 3/4" Crimp x 1" Crimp 10 PAT lb. Tee, Poly-Alloy, Reducer, 1" Crimp x 1" Crimp x 1/2" Crimp 10 PAT lb. Tee, Poly-Alloy, Reducer, 1" Crimp x 3/4" Crimp x 3/4" Crimp 10 PAT lb. Tee, Poly-Alloy, Reducer, 1" Crimp x 1" Crimp x 3/4" Crimp 10 PAT lb. Tee, Poly-Alloy, 1" Crimp x 1" Crimp x 1" Crimp 10 PAT lb. Poly-Alloy Swivel Couplings. For connecting 3/8" or 1/2" WaterPEX supply lines directly from manifold or branch supply to faucet. (Not needed if using WaterPEX Risers or Flexible Risers.) MODEL ORDER Coupling, Swivel, Poly-Alloy, 3/8" Crimp x 1/2" FIP 10 PASC lb. Coupling, Swivel, Poly-Alloy, 1/2" Crimp x 1/2" FIP 10 PASC lb. Coupling, Swivel, Poly-Alloy, 3/4" Crimp x 3/4" FIP 10 PASC lb. Elbow, Swivel, Poly-Alloy, 1/2" Crimp x 1/2" FIP 10 PASE lb. Elbow, Swivel, Poly-Alloy, 3/4" Crimp x 3/4" FIP 10 PASE lb. Poly-Alloy Test Plugs. Used for pressure testing the system. MODEL ORDER Test Plug, Poly-Alloy, 3/8" Crimp 10 PAP lb. Test Plug, Poly-Alloy, 1/2" Crimp 10 PAP lb. Test Plug, Poly-Alloy, 3/4" Crimp 10 PAP lb. Test Plug, Poly-Alloy, 1" Crimp 10 PAP lb.

16 Page 14 Stubout Brackets and Stubout Elbows 1-hole elbow bracket 2-hole elbow bracket PEX Stubout Brackets and Grommets. PEX Stubout Brackets and Grommets are used to position and align PEX stubouts at fixtures, or along joists or studs. The bracket is secured to wood framing with nails. The grommet is inserted into the bracket, then the WaterPEX slides through the grommet. This creates a secure, stable stubout for attaching valve stops. Grommets are made of fire-retardant materials. Galvanized 1-hole PEX Elbow Bracket 10 PCGBE1H lbs. Galvanized 2-hole PEX Bracket, 7" 10 PCGB2H lbs. Galvanized 2-hole PEX Elbow Bracket, 7" 10 PCGBE2H lbs. Galvanized 7-hole Universal Bracket, 20" 10 PCGB lbs. 2-hole bracket 7-hole bracket 1/2" Insert Grommet for Galvanized Bracket 10 PCIG lb. 3/4" Insert Grommet for Galvanized Bracket 10 PCIG lb. 1" Insert Grommet for Galvanized Bracket 10 PCIG lb. Grommet CrimpRing CrimpRing Copper Stubout Riser Grommet PEX Stubout Bracket Putting it Together. Eared Stubout Elbow 1/4-turn Angle Stop Copper Stubout Bracket 1/4-turn Angle Stop Copper Stubout Brackets. Copper Stubout Brackets are used to position and align copper pipe and/or stubout elbows at plumbing fixtures (as an alternative to using PEX Stubouts, see below). The brackets are nailed to the wood framing, then the copper pipe or stubouts are soldered to the brackets. This creates a secure, stable stubout for attaching valve stops. 1/2", 3/4", and 1" Copper Bracket, 20" 10 PCCB lbs. Eared Strap Copper Stubout Elbows. 90 Barbed transition from WaterPEX supply piping to fixture supply piping. 1/2" Crimp x 1/2" Nom. Stubout Elbow, 8" 10 PCSTUBLXX lbs. 3/8" Crimp x 1/2" Nom. Stubout Elbow 10 PCSTUB lbs. w/eared Strap, 8" 1/2" Crimp x 1/2" Nom. Stubout Elbow 10 PCSTUB lbs. w/eared Strap, 8"

17 Bend Supports Page 15 Mid-run Bend Supports. Mid-run Bend Supports help WaterPEX bend in walls and joist cavities. 1/2" Mid-run Bend Supports NEW! 10 PSBM33X lbs. 3/4" Mid-run Bend Supports 10 PSBM55X lbs. Supply Lines and Fittings WaterPEX Riser Nut (sold separately) Terminal Bend Supports. Terminal Bend Supports are plastic elbows that are used at the ends of the WaterPex to make smooth, clean transitions up to manifolds. 3/8" and 1/2" Terminal Bend Supports 10 PSB23X lbs. 3/4" Terminal Bend Supports 10 PSB45X lbs. WaterPEX Risers Faucet and Water Closet. Install 3/8" O.D. WaterPEX risers between the faucet or toilet connection and the compression side of a 1/4-turn straight or angle stop. Risers come complete with plastic Compression Ferrule. Order separately, Faucet Nut for Faucet Risers and Water Closet Nut for Water Closet Risers (below). 3/8" O.D. x 12" Faucet Riser 1 PRL lb. 3/8" O.D. x 20" Faucet Riser 1 PRL lb. 3/8" O.D. x 12" Water Closet Riser 1 PRC lb. 3/8" O.D. x 20" Water Closet Riser 1 PRC lb. 3/8" O.D. x 30" Water Closet Riser 1 PRC lb. WaterPEX Riser Nuts Faucet and Water Closet Connection Faucet Plastic Nut 10 PFCN lb. Water Closet Plastic Nut 10 PTCN lb. Plastic Ferrule, 1/4" Tube, 3/8" O.D. 10 PF14T lb. Faucet Nut Water Closet Nut Faucet Connection. For connecting 3/8" or 1/2" WaterPEX supply lines directly from manifold or branch supply to faucet. (Not needed if using WaterPEX Risers or Flexible Risers.) MODEL ORDER 3/8" WaterPEX Brass Crimp x 1/2" FPT Plastic Nut 10 PFC lbs. 1/2" WaterPEX Brass Crimp x 1/2" FPT Plastic Nut 10 PFC lbs. 3/4" WaterPEX Brass Crimp x 3/4" FPT Brass Nut 10 PFC lbs. Water Closet Connection. For connecting 3/8" or 1/2" WaterPEX supply lines directly from manifold or branch supply to water closet. (Not needed if using WaterPEX Risers or Flexible Risers.) MODEL ORDER 3/8" WaterPEX Brass Crimp x Plastic Closet Nut 10 PTC lbs. 1/2" WaterPEX Brass Crimp x Plastic Closet Nut 10 PTC lbs.

18 Page 16 WaterPEX Tools Basic Tubing Cutter. All-metal construction makes this cutter superior to the plastic kinds. Basic Tubing Cutter 1 PTC lb. Professional Tubing Cutter. Cuts WaterPEX to length. This ratchet-style cutter is made of all-metal, heavy-duty construction and designed for the rigor of daily jobsite use. Professional Tubing Cutter 1 PTC lb. PEX Unwinder. This is a must for any WaterPEX installation. The Unwinder works for both barrier and non-barrier PEX. It can handle all sizes of coils. The coil sits on the tripod and is held in place as it unwinds with four guide-bars. The WaterPEX is uncoiled through a guide-ring that sits at the top of the unwinder. PEX Unwinder 1 P lbs. CinchTool. Installs all sizes of CinchClamps. WaterPEX connections take only seconds. Ratchet design releases when the CinchClamp tab is properly pinched. Great for those hard-to-reach spaces. No calibration necessary. Meets ASTM F2098 specifications. CinchTool 1 PCCCT lbs. RingMaster Crimp Tool. Larger tool for more leverage. Includes RingMaster fitted with crimping jaws. Other jaws can be purchased separately (see next page). 3/8", 1/2", 5/8", and 3/4" jaws fit 15" tool; 1" jaws fit only in 19" tool. 15" RingMaster Crimp Tool, 3/8" 1 PCCRT2N lbs. 15" RingMaster Crimp Tool, 1/2" 1 PCCRT3N lbs. 15" RingMaster Crimp Tool, 3/4" 1 PCCRT4N lbs. 19" RingMaster Crimp Tool, 1" 1 PCCRT5N lbs. CrimpAll Tool Kit. Interchangeable crimping jaws make the CrimpAll the only tool in North America that crimps 3/8", 1/2", 5/8", and 3/4" CrimpRings. Tough plastic tool kit helps you keep track of all your crimping tools. Kit includes the 15" CrimpAll tool, interchangeable 3/8", 1/2", 5/8", and 3/4" crimping jaws, Go/No-Go crimp gauge, and adjustment tools. 1" jaws do not fit the 15" tool and are not included in this kit. CrimpAll Tool Kit 1 PCCRT lbs.

19 Page 17 WaterPEX Tools CrimpAll Tool Go/No-Go Gauge Interchangeable Jaws 3/8" 1/2" 5/8" 3/4" 1" Adjustment Tools Set Replacement CrimpAll and RingMaster Parts. Replace or enhance your arsenal of crimping tools. CrimpAll Tool 1 PCCRT lbs. 3/8" Crimping Jaws, for 15" tool 4 PCJ lb. 1/2" Crimping Jaws, for 15" tool 4 PCJ lb. 5/8" Crimping Jaws, for 15" tool 4 PCJ lb. 3/4" Crimping Jaws, for 15" tool 4 PCJ lb. 1" Crimping Jaws, for 19" tool 4 PCJ lb. Go/No-Go Gauge 4 PCGA lb. CrimpAll Adjustment Tools, Set 4 PCCRT lb. CrimpMaster Tool. Smaller, more compact for tight spaces. MODEL ORDER 3/8" CrimpMaster Tool 1 PCMT lbs. 1/2" CrimpMaster Tool 1 PCMT lbs. 3/4" CrimpMaster Tool 1 PCMT lbs. Batteries Cordless Kit Electric Cordless Crimp Tool Kit. This industrial tool uses forged steel jaws to crimp 3/8", 1/2", 3/4", 1", and 1-1/4" crimp fittings. Jaws change out in seconds on the jobsite. Kit includes battery-powered cordless tool, second battery, charger, and steel case. Jaws sold separately. Cordless tool with jaw inserted. MODEL ORDER Crimp Tool Kit, Cordless 1 PCRT lbs. Corded Kit Electric Corded Crimp Tool Kit. Kit includes corded crimp tool and steel case. Jaws sold separately. MODEL ORDER Crimp Tool Kit, Corded 1 PCRT2345C lbs. Corded crimping tool with jaw inserted. Tool Kit accessories for cordless and corded crimping tools. 3/8" Jaw 1/2" Jaw 3/4" Jaw MODEL ORDER 3/8" Crimping Jaw 1 PCRT lbs. 1/2" Crimping Jaw 1 PCRT lbs. 3/4" Crimping Jaw 1 PCRT lbs. 1" Crimping Jaw 1 PCRT lbs. 1-1/4" Crimping Jaw 1 PCRT lbs. Extra Battery for CrimpRing Tool 1 PCRTB lbs. 1" Jaw 1-1/4" Jaw

20 Page 18 WaterPEX Tools CrimpRing Go/No-Go Gauge. Used to check for a proper crimp connection. MODEL ORDER 3/8" 3/4" WaterPEX Go/No-Go Gauge 1 PCGA234P lb. 1" WaterPEX Crimp Gauge 1 PCGA5P lb. WaterPEX Fasteners StrapDowns SnapClips ClipStop Interlock Feature ClipRail Use this size SnapClip to mount 1" manifolds SnapClip. For holding WaterPEX tubing firmly in place. SnapClips can be used with or without ClipRails. They can be interlocked for a very tight arrangement. Anchor them with a single screw through base (screws not included). 3/8" WaterPEX SnapClip, 12 mm 100 P lb. 1/2" WaterPEX SnapClip, 15 mm 100 P lb. 3/4" WaterPEX SnapClip, 20 mm 100 P lbs. 1" WaterPEX SnapClip, 28 mm 100 P lbs. SnapClips PEX

21 Page 19 WaterPEX Fasteners StrapDown. For fastening WaterPEX when used as supply and return piping. StrapDowns can be used with or without ClipRails. They can be interlocked for a very tight arrangement. Anchor them with a single screw through base (screws not included). 3/8" 3/4" WaterPEX StrapDown Fastener, mm 10 P lb. 3/4" 1" WaterPEX StrapDown Fastener, mm 10 P lbs. StrapDowns PEX ClipRail and ClipStop. For spacing and organizing StrapDowns and SnapClips. ClipStop MODEL ORDER ClipRail, Galvanized Steel, 2 Meter (6.6') 10 P lbs. ClipStop for ClipRail 10 P lb. ClipRail with ClipStop Universal Manifold Bracket. This bracket will hold a pair of Watts Radiant Copper Manifolds one hot and one cold. This narrow bracket fits within a 3-1/2" wall or can be mounted external to the wall. Order manifold cabinets separately. MODEL ORDER Universal Manifold Bracket, 3/4" and 1" 1 Pair lbs.

22 Page 20 WaterPEX Accessories Washing Machine WaterOff Control Center. Protects all connections, and comes with a knockout for safety drain line. Shuts off all water pressure to washing machines with a single easy-lever handle. Prevents water damage when your customer is away. Fitted for standard washing machine hose connections, with swivel 1/2" CrimpRing WaterPEX connections to the house plumbing. Maximum temperature 180 F, maximum pressure 150 psi. (Hoses sold separately.) MODEL ORDER Washing Machine WaterOff Control 1 PDWB lbs. Center w/ Decorative Box Washing Machine WaterOff Valve, only 1 PDWBC lbs. WaterOff Control Valve only WaterOff Control Center Washing Machine Valve and Enclosure Package comes complete with two individual 1/4-turn brass valves and white protective enclosure with face plate. Valves are fitted for standard washing machine hose and 1/2" WaterPEX CrimpRing fittings. The design allows for left, center or right valve and waste mounting. The 6-1/2" x 7-5/8" x 3" enclosure comes complete with brackets for nailing to house framing. (Hoses sold separately.) MODEL ORDER Washing Machine Valve and Enclosure 1 PWM lbs. Washing Machine Valve, only 1 PWM lbs. Washing Machine Valve only. Specify red handle (hot water) or blue handle (cold water) when ordering. Ice Maker Valve and Enclosure Package comes complete with one 1/4-turn brass valve and white protective enclosure with face plate. Valves are fitted for standard 1/4" compression ice maker and 1/2" WaterPEX CrimpRing fitting. The 5-3/16" x 5-3/16" x 2-1/2" enclosure nails directly to house framing. MODEL ORDER Ice Maker Valve and Enclosure 1 PIM lbs. Ice Maker Valve, only 1 PIM lbs. Ice Maker Valve only.

23 Home Run Plumbing Method Use WaterPEX distribution manifolds to supply each fixture. Optional shut off valves give you on/off control of every fixture, ensuring easy service work and customer satisfaction. Home Run Advantages Faster hot water service to each fixture Centralized circuit control Balanced water flow to each fixture Fewer concealed fittings Hot/cold water manifolds Tub and shower piping and fixtures Hot/cold water faucet risers Water closet riser Why Professional Plumbers Love Leak-Proof Connections WaterPEX uses the Copper CrimpRing, the most popular and proven connection system in the world. Eliminates leaky solder joints. Maintenance-Free The smooth interior eliminates scale build-up and corrosive water damage. Guaranteed Backed up by the industry s best 25-year comprehensive, non-prorated warranty. Silent WaterPEX tubing eliminates water hammer and dampens the sound of flowing water. Freeze-Resistant While no tubing is freeze-proof, WaterPEX is amazingly freeze-tolerant because of its strength and flexibility. Flexible Lightweight, flexible WaterPEX coils and sticks requires fewer joints than rigid plumbing systems, so WaterPEX installs faster and easier.

24 Codes, Listings, and Standards WaterPEX is manufactured in accordance with American Standard Testing Methods F-876 and F-877 to SDR-9 dimensional standards. It is listed by the National Sanitation Foundation NSF-61 for use in potable water systems. WaterPEX labeled NSF CL-R meets the requirements for use in chlorinated domestic continuous recirculation systems. WaterPEX is also listed by the International Code Council Evaluation Service (ICC-ES, successor to ICBO), the International Association of Plumbing and Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code symbol. WaterPEX is tested and certified to the Canadian Standard Association (CSA) standard B A division of Watts Radiant, Inc. A subsidiary of Watts Water Technologies, Inc. In the United States: toll-free phone phone fax NYSE: WTS In Canada: Watts Industries Canada 5435 North Service Road Burlington, ON L7L 5H toll-free phone phone toll-free fax fax Watts Radiant Watts WaterPEX Catalog LIT#WPCAT0804 Effective 08/26/2004 Information in this catalog supersedes all previous WaterPEX catalogs and price sheets.