AC Switches. AC Switches Index

Transcription

1 SECTION INDEX Industrial Grade Switches Overview Back and Side Wired Toggle Locking Canadian 347V AC Pilot Light Lighted Handle Maintained Contact Momentary Contact Side Wired Toggle Locking AC Manual Motor and Welder Starting Safety Disconnect Switches , 9 Key Lock Power Commercial Grade Switches Overview Back and Side Wired Toggle Side Wired Toggle Hospital Call Canadian 120/277V AC Lighted Toggle Canadian 347V AC ramed Toggle Surface Mount Residential Grade Switches Quickwire and Sidewire Illuminated Toggle CO/ALR Index

2 AC SWITCH EATURES Industrial Grade LEVITON OERS A ULL LINE O 15, 20 AND 30 AMP AC SWITCHES, AVAILABLE IN INDUSTRIAL, COMMERCIAL AND RESIDENTIAL GRADE, WITH A WIDE VARIETY O COLORS, WIRING OPTIONS AND OTHER EATURES. Levitons AC switches for controll resistive and inductive loads and motors. A full selection of ratings is available in Industrial Grade, Commercial Grade and Residential Grade. The following pages provide a comprehensive overview of the complete Leviton AC Quiet Switches product line. Ordering information will help you select the switches best suited to meet your application requirements. Leviton s Industrial Grade AC switches for heavy-duty applications represent top-of-the-line quality and peak performance. Leviton uses the finest materials available and the highest production standards to produce industrial switches of unmatched versatility and reliability. eatures and Benefits Top-of-the-line industrial-grade quality for peak performance and rugged, long-lasting service All screws are double-drive and accept Standard and Phillips screwdrivers External clamp-type wiring terminals provides secure connection of solid or stranded wire for back or side wiring Back or side-wired grounding terminal offers wiring flexibility Sturdy, long-lasting thermoplastic toggles provide smooth switching action and long life UL 20 Listed; meets latest ederal Specifications WS-896, CSA Specification C No. 11 Certified; NOM Certified; complies with NEMA and ANSI requirements Backed by a Limited 10-Year Warranty Back and Side Wired External clamp-type terminals for maximum wiring versatility I shown Thermoplastic toggle has high-impact strength and withstands elevated operating temperatures ully enclosed switch mechanism in rugged thermoplastic housing for strength, tracking and arc resistance Break-off plaster ears for use as shims Pilot Light Toggle is illuminated when load is on for visual confirmation PLC shown Color-coded covers: 15 Amp-blue; 20 Amp-red; 30 Amp-green I Back or side-wired grounding terminal for quick installation Large head, double-drive combination screws for speedy wiring and installation Large silver cadmium-oxide contacts for long life, prevent sticking, welding and excessive pitting Locking Designed to prevent tampering and unauthorized switching L shown Heavy-gauge copper alloy, one-piece contact and toggle cam arm provides smooth, firm toggle action for fast-make and slow-break operation 2 Heavy gauge, anti-corrosive mounting strap with steel grounding screw and selfgrounding clip External clamp-type terminal provides secure connection for back and side wiring Shallow 3 /4" deep body for more wall box room Maintained and Momentary Contact Positive switching action with center-off position shown To learn more about Leviton s outstanding offering of devices visit our Website at:

3 15, 20 and 30 AMP 120/277V 15 and 30 AMP CANADIAN 347V Industrial Grade AC Quiet Switches Back and Side Wired 120/277V AC Quiet Switches UR DESCRIPTION 15 AMP 20 AMP 30 AMP COLOR* LEVSPEC Single-Pole Toggle A: I, W, GY, R 20A: I, W, A, T, GY, R, E 30A: I, W Single-Pole Locking L L L 15A: I; 20A: I, W, G, R Double-Pole Toggle A: I, W, GY 20A: I, W, GY, R, E 30A: I, W Double-Pole Locking L L L 20A: I 3-Way Toggle A: I, W, GY, R 20A: I, W, GY, R, E 30A: I, W 3-Way Locking L L L 15A: I; 20A: I, W, G 4-Way Toggle A: I, W, GY 20A: I, W, GY, R, E 4-Way Locking L L 20A: I, G, W SPECCLASS General Duty Switches Single Pole Toggle 1221-S 20A: I, W, R, GY Double Pole Toggle 1222-S 20A: I, W, GY 3-Way Toggle 1223-S 20A: I, W, R, GY 4-Way Toggle 1224-S 20A: I, W, GY Key for Locking Switch: Cat. No PRT. Back and Side Wired Canadian 347V AC Quiet Switches R DESCRIPTION 15 AMP 20 AMP COLOR** See Canadian Color Single-Pole Toggle A & 20A: I, W, B, R, G Double-Pole Toggle A: I only 20A: I, B 3-Way Toggle A & 20A: I, W, B, R, G 4-Way Toggle A: I, B, R, G 20A: I, B NOTE: Cat. Nos. 1201, 1221, 18201, 18221, 1203, 1223, and feature external clamp-type wiring termination for back and side wiring 0.95 (24.3) IL I (25.1) (26.1) KEY Wallplates THERMOPLASTIC EMERGENCY 302 STAINLESS STEEL 2.1 (53.9) I E W or complete wallplate selection, see Section E E (26.1) W SPECIICATIONS AND EATURES Top-of-the-line industrial quality Heavy gauge copper alloy one-piece arm for top performance Large silver cadmium-oxide contacts for long life, prevent sticking, welding and excessive pitting Color-coded covers: 15 Amp-blue;20 Amp-red; 30 Amp-green ully enclosed switch mechanism in rugged housing for strength, tracking and arc resistance Brass combination-head terminal screws on LEVSPEC devices, steel combination head terminal screws on other devices Self-grounding clip on LEVSPEC devices (selfgrounding when used with a metal wallbox) Meets all NEMA WD 1 & 6, and ANSI requirements Meets ederal Specification WS-896 UL Listed (ile #E-7458) CSA Certified (ile #152105) Backed by a Limited 10-Year Warranty SPECCLASS devices backed by a Limited 2-Year Warranty *COLOR Basic Cat. Nos. shown above denote Brown color. Other color available as listed, add suffix to catalog number as follows: Ivory (-I), White (-W), Gray (-GY or -G), Red (-R), Black/Ebony (-E), Almond (-A) and Light Almond (-T). or locking switch colors, use the following suffixes: Ivory (-2IL), White (-2WL), Gray (-2GL), Red (-2RL). ** CANADIAN COLOR or color selection, add suffix to catalog number as follows: Ivory (-I), White (-W), Brown (-B), Red (-R), and Gray (-G). 15A 20A 30A V 120V 240V 240V 240V Environmental: lammability, Rated V2 or answers to technical questions, call Leviton s Techline at

4 15, 20 and 30 AMP 120V and 20 AMP 277V Industrial Grade 4.06 (103,2) (26.1) 1201-PLC Pilot Light and Lighted Handle Back and Side Wired Pilot Light UR DESCRIPTION* 15 AMP 20 AMP 30 AMP 20 AMP 120V 120V 120V 277V Single-Pole 1201-PL 1221-PL 3031-PL P Double-Pole 1202-PL PL 3032-PL P+ 3-Way 1203-PL 1223-PL P+ Note: Pilot light switches require a neutral wire; lighted handle switches do not require a neutral wire. *Available toggles for these devices: Clear (-PLC), Red (-PLR), Green (-PLG). +Available in red toggle only. Available in ivory or red toggle only. Back and Side Wired Lighted Handle UR DESCRIPTION 15 AMP 20 AMP 30 AMP 20 AMP 120V 120V 120V 277V Single-Pole 1201-LH 1221-LH 3031-LH* L 3-Way 1203-LH 1223-LH L Note: Pilot light switches require a neutral wire; lighted handle switches do not require a neutral wire. Available toggles for these devices: Clear (-LHC), Ivory (-LHI), White (-LHW). *Available in ivory toggle only. Wallplates THERMOPLASTIC EMERGENCY 302 STAINLESS STEEL (26.1) 1201-LHI I I W or complete wallplate selection, see Section E E (26.1) 1222-PLR (26.1) 1223-LHW SPECIICATIONS AND EATURES Pilot light and lighted handle switches provide top performance in punishing industrial applications Lighted handle illuminated when load is O. Pilot light toggle illuminated when load is ON. 120 and 277V versions in single pole and 3-way ully enclosed switch mechanism in rugged housing for strength, track and arc resistance Self-grounding clip (self-grounding when used with a metal wallbox) Meets all NEMA WD 1 & 6, and ANSI requirements Meets ederal Specification WS-896 UL Listed (ile #E-7458) CSA Certified (ile #152105) Backed by a Limited 10-Year Warranty 15A 20A 30A V 120V Environmental: lammability, Rated V2 To learn more about Leviton s outstanding offering of devices visit our Website at:

5 15, 20 and 30 AMP 120/277V Industrial Grade Maintained and Momentary Contact Back and Side Wired Maintained Contact 120/277V AC UR DESCRIPTION 15 AMP 20 AMP 30 AMP COLOR* Single-Pole, A: I, W Double Throw, 20A: I, W, GY Center Off 30A: I Single-Pole, 1281-L 1285-L 1287-L 15, 20 & 30A: Black only Double Throw, Center Off, Locking Double-Pole, A: I, W Double Throw, 20A: I, W Center Off 30A: I Double-Pole, 1288-L 30A: Black only Double Throw, Center Off, Locking Key for Locking Switch: Cat. No PRT 1.37 (34.9) 0.95 (24.3) 1281-L 1.26 (32.0) 2.75 (69.8) Back and Side Wired Momentary Contact 120/277V AC UR DESCRIPTION 15 AMP 20 AMP 30 AMP COLOR* Single-Pole, : I, W, GY Double-Throw, 20A: I Center Off 30A: Brown only Single-Pole, 1257-L 20A: Black only Double-Throw, Center Off, Locking Double-Pole, A: Brown only Double-Throw, Center Off Key for Locking Switch: Cat. No PRT. CSA Certified except where indicated by Wallplates THERMOPLASTIC EMERGENCY 302 STAINLESS STEEL 1.37 (34.9) (34.9) 1.26 (32.0) 2.75 (69.8) I E W or complete wallplate selection, see Section E E (83.30) 2.75 (69.8) SPECIICATIONS AND EATURES Single-Pole and Double-Pole versions, toggle or locking Positive switching action with center-off position Large silver cadmium-oxide contacts for long life, prevent sticking, welding and excessive pitting Clamp-type terminals accept up to #10 CU wire ull rated current capacity on fluorescent, tungsten and resistive loads; motor load capacity up to 80% switch current rating Meets all NEMA WD 1 & 6, and ANSI requirements UL Listed (ile #E-7458) CUL (ile #E-63969) Backed by a Limited 10-Year Warranty *COLOR Basic Cat. Nos. shown above denote Brown color except for Locking Devices (Black). Other colors available as listed, add suffix to catalog number as follows: Ivory (-I), White (W-) and Gray (-GY). 15A 20A 30A V 120V 240V 240V 240V Environmental: lammability, Rated V (34.9) 0.95 (24.3) 1257-L or answers to technical questions, call Leviton s Techline at (32.0) 2.75 (69.8) 1.26 (32.0) 5

6 15 and 20 AMP 120/277V Industrial Grade AC Quiet Switches 2.19 (55.6) 0.92 (23.4) GY Side Wired 120/277V AC Quiet Switches UR DESCRIPTION 15 AMP 20 AMP COLOR* Single-Pole Toggle A: I, W, GY 20A: I, W, GY, R Single-Pole Locking L L 15A & 20A: Brown Only Double-Pole Toggle A: I 20A: I, W, GY Double-Pole Locking L L 15A & 20A: Brown Only 3-Way Toggle A: I, W, GY 20A: I, W, GY, R 3-Way Locking L L 15A & 20A: Brown Only 4-Way Toggle A: Ivory only 20A: I, W, GY, R 4-Way Locking L L 15A & 20A: Brown Only Key for Locking Switch: Cat. No PRT. Wallplates THERMOPLASTIC 302 STAINLESS STEEL EMERGENCY 2.19 (55.6) I W or complete wallplate selection, see Section E E (24.1) L 0.92 (23.4) 2.19 (55.6) (23.4) W SPECIICATIONS AND EATURES Rugged construction for trouble-free service in industrial environments Heavy-gauge copper alloy one-piece arm for smooth, quiet, firm toggle action Large silver cadmium-oxide contacts for long life, prevent sticking, welding and excessive pitting Large head, deep-slotted terminal screws for fast, easy wiring; accept up to #10 copper and copperclad wire Self-grounding clip (self-grounding when used with a metal wallbox) Meets all NEMA WD 1 & 6, and ANSI requirements UL Listed (ile #E-7458) to meet the latest ederal Specification, WS-896 CSA Certified (ile #152105) Backed by a Limited 10-Year Warranty *COLOR Basic Cat. Nos. shown above denote Brown color. Other colors available as listed, add suffix to catalog number as follows: Ivory (-I), White (-W), Gray (-GY), Red (-R), Black/Ebony (-E). 15A 20A V 240V 240V Environmental: lammability, Rated V2 To learn more about Leviton s outstanding offering of devices visit our Website at:

7 30, 40 and 60 AMP 600V Industrial Grade AC Manual Motor and Welder Starting Switches Back and Side Wired AC Manual Motor Starting Switches 30 AMP 600V AC UR DESCRIPTION MAX. HP IN NEMA IN NEMA SWITCH RATING 1 ENCL. 3R ENCL. ONLY Double-pole, single-throw AC 2HP 120V AC N1302 N3302 MS302 manual motor starting switch, 5HP 240V AC without overload protection. 10HP 480V AC Color: Black 15HP 600V AC Same as above Short Toggle MS302-S Three-pole, single-throw AC 3HP 120V AC N1303 N3303 MS303 manual motor starting switch, 7.5HP 240V AC without overload protection. 15HP 480V AC Color: Black 20HP 600V AC Same as above Short Toggle MS303-S Back and Side Wired AC Manual Motor Starting Switches 40 AMP 600V AC UR DESCRIPTION MAX HP RATING CAT. NO. Double-pole, single-throw AC manual 2HP 120V AC MS402 motor starting switch, without overload 5HP 240V AC protection. 10HP 480V AC Color: Black 15HP 600V AC Three-pole, single-throw AC manual 3HP 120V AC MS403 motor starting switch, without overload 7.5HP 240V AC protection. 15HP 480V AC Color: Black 20HP 600V AC Back or ront Wired AC Manual Motor Starting Switches 60 AMP 600V AC UR DESCRIPTION MAX. HP IN NEMA SWITCH RATING 3R ENCL. ONLY Double-pole, single-throw AC manual 10HP 240V AC N3602 MS602-BW motor starting switch, without overload 15HP 480V AC protection. Back Wired. Color: Black 20HP 600V AC Same as above except ront Wired MS602-W Three-pole, single-throw AC manual 10HP 240V AC N3603 MS603-BW motor starting switch, without overload 25HP 480V AC protection. Back Wired. Color: Black 30HP 600V AC Same as above except ront Wired MS603-W Side Wired AC Manual Welder Starting Switches 40 AMP 600V AC UR DESCRIPTION MAX. HP RATING CAT. NO. Double-pole, single-throw AC manual 5HP 250V AC WS402 welder starting switch. Color: Black 5.60 (142.2) 3.75 (95.3) 3.11 (78.7) 2.40 (61.0) N (51.6) 0.90 (22.9) 2.97 (75.4) 1.51 (38.3) MS302-S 1.20 (35.0) Enclosures and Wallplates TYPE 1 STEEL TYPE 3R 302 STAINLESS STEEL LOCKOUT TYPE 1 ENCLOSURES TYPE 3R ENCLOSURE ENCLOSURE ENCLOSURE WALLPLATE w/tamper-resistant w/thermoplastic WITHOUT SWITCH WITHOUT SWITCH WITHOUT SWITCH SCREWS and SPANNER TOOL COVER and or 40 or 60A or 30A MS Switches or 30A MS Switches w/30a 2-P (N1302-T) or MS Switches 30A 3-P (N1303-T) Switch 2 Knockouts 2 Bottom 2 Bottom 1/2"and 3 /4" Knockouts Knockouts Top #1 Allows: both allow: Bottom 1/2", 3 /4", 1/2", 3 /4", 1", 1 1 /4" 1", 1 1 /4" #2 Allows: N13NC 1/2", 3 /4" N33NC LOK (Lock purchased separately) N1303-T N13NC-T (w/30a Switch) (Cover Only) Note: or Type 3R Enclosure lockout, padlock with 5 /16" or equivalent shackle recommended (min. 1 /4" Dia.). or complete wallplate selection, see Section E. N36NC 2.19 (55.6) 1.14 (29.0) WS402 MS Switches All molded parts are thermoplastic to resist impacts, chemicals, temperature, tracking and arcing Positive-contact design enhances fast-make/ slow-break Silver-alloy contacts for maximum conductivity and service life Back and side wire terminals accept up to #10 AWG solid copper wire. or stranded #8 AWG wire, remove terminal clamp and use ring terminal Oversized #10 triple-combination terminal screws are vibration resistant Insulating barrier between terminals provide isolation from each phase SPECIICATIONS AND EATURES Nickel-plated brass mounting yoke for superior corrosion resistance Large toggle provides positive actuation, even with gloved hand WS Switches Capable of accommodating bus bar termination in multi-gang applications Hole for mounting hardware supports panel mounting with self-threading fasteners or pop rivets Terminal screws accept up to # 10 AWG solid copper wire. or stranded # 8 AWG wire, remove terminal clamp and use ring terminal ast-threading, corrosion-resistant brass triplecombination screws for fast, easy installation MS devices: UL & CUL Listed (ile #E-63969) WS devices: UL Recognized Component (ile #E-63969) MS & WS devices comply with UL 508 Backed by a Limited Ten-Year Warranty UL94 VO lammability Rating Operating Temperature: -40 C to 65 C or answers to technical questions, call Leviton s Techline at

8 SAETY DISCONNECT SWITCH EATURES Industrial Grade Watertight Safety Disconnect Switches UL 98 & UL 508 Listed, CUL per CSA Specification, C22.2 No. 14 Certified 2 YEAR LIMITED Liquid-tight conduit fitting can be installed for top or bottom feed One fitting supplied: 30 Amp 3 /4" 60 Amp 1 1 /4" 100 Amp 1 1 /2" Red pistol grip handle provides visual confirmation of switch s status Integrated lockout handle meets OSHA safety regulations Stainless steel screws are captive and will not fall out when cover is opened Watertight Safety Disconnect Switches Include 30 Amp used, 60 & 100 Amp (used & Non-used) Watertight Safety Disconnect Switches Impact UV and chemical-resistant Valox enclosure rated to UL and IEC watertight standards Type 3R, 4X & 12K IP67 used Models Accept Class J Time-Delay uses Pre-wired grounding plates (top and bottom of enclosure) connect to metal conduit grounding system Brass threaded inserts will not strip, provide higher torque, and form tighter seal between back box and cover DS60-AX Meets 2002 NEC Requirements (A) and (B) Circuit identification pad for means of identifying specific equipment loads Generous wiring space for top to bottom wiring Handle with padlock installed Disconnect switch with integrated fuse holder offers proven performance in a compact package used cartridges accept Class J fuses (not included) 1 actory installed Auxiliary Contact (Normally Open 10 Amp) Additional Auxiliary Contact Available (Normally Closed 10 Amp) Easily accessible neutral and ground terminal blocks Rugged hinge mechanism pivots 180º for easy access during installation and maintenance Cover Screws: 1 1 /8" deep slotted. LG stainless steel. Mounting Screws: x 1 /2" deep slotted. LG stainless steel. by Leviton DS60-AX 8 STANDARDS & CERTIICATIONS Saftey Disconnect Switches UL 98 used UL 508 CSA C22.2 NOM CE IEC (Including 100A Non-used - DS) Non-used No E63969 To learn more about Leviton s outstanding offering of devices visit our Website at:

9 TECHNICAL INORMATION Industrial Grade Watertight Safety Disconnect Switches 2 YEAR LIMITED by Leviton Meets 2002 NEC Requirements (A) and (B) Engineered to UL & IEC Watertight Standards AMPS Current Interrupting Endurance Dielectric DS30-AX Engineered to IP65 Water Jetting Standards Ordering Information for Watertight Safety Disconnect Switches Ground Path Integrity MAX VOLTAGE INTERUPTED RATINGS RMS SYMMETTRICAL AMPERES CATALOG NO. NON-USED CATALOG NO. USED V AC DS30-AX DS30-AX V AC DS60-AX DS60-AX V AC DS100-AX ELECTRICAL Device Current Duration Applied 30 A 60 A 2 min 60 A 120 A 4 min 100 A 200 A 6 min Certified for current interrupting at full-rated current and voltage 6000 operations at rated current and voltage (Power factor ) 1000 V plus twice rated voltage for 1 minute MECHANICAL Mold Stress Relief 70 C for 7 hours Remains in place Knockout Test with 20 lb push Crush Impact Cold Impact Strength of Insulating Base and Support Pullout DS60-AX (used) Non-used are suitable for use on circuits capable of delivering not more than (see chart below for catalog no. and value) RMS symmetrical amperes. 100 lb 1.2 lb steel ball dropped from 5 ft Same as above, after conditioning to -35 C 110% of specified tightening torque on terminal screws 18 lb pull on internal wires DS100-AX (Non-used) used, when protected by Class J fuses, 600V AC maximum, are suitable for use on circuits capable of delivering not more than (see chart below for catalog no. and value) RMS symmetrical amperes. ENVIRONMENTAL V2 or better per UL 94 or CSA lammability 22.2 No 0.6; V-0 for watertight enclosure Rain (3R) Water per UL 50 5 psi from all sides for 1 hr Hosedown (4X) Water per UL gal/min for 5 minutes Cement Dust Dust (12K) per UL ft/minute for 5 minutes Gasket Aging 70 C for 168 hours Exposed plastic UV Resistance materials are UV stabilized Operating -40 C to +60 C Temperature (-40 to +140 ) Watertight Safety Disconnect Switches MAX. HP RATINGS PER UL508 VOLTS NON-USED SAETY DISCONNECT SWITCHES DS30-AX DS60-AX DS100-AX 120V AC V AC V AC V AC V AC NA Ø Y 120/208V AC Ø 240V AC Ø 480V AC Ø 600V AC NR = Not Rated NA = Not Available MAX. HP RATINGS PER UL508 USED SAETY DISCONNECT SWITCHES or answers to technical questions, call Leviton s Techline at VOLTS DS30-AX DS60-AX 120V AC 2 NR 208V AC V AC 3 NR 480V AC 15 NR 600V AC 20 NR 3Ø Y 120/208V AC Ø 240V AC Ø 480V AC Ø 600V AC

10 20 AMP 120/277V Industrial Grade AC Key Lock Power Switches 2.19 (55.6) Back and Side Wired Key Lock Power Switches 20 AMP 120/277V AC UR DESCRIPTION CAT. NO. Single-Pole Key Lock Power Switch, 2 keys provided KL Double-Pole Key Lock Power Switch, 2 keys provided KL 3-Way Key Lock Power Switch, 2 keys provided KL 4-Way Key Lock Power Switch, 2 keys provided KL Replacement Keys, 2 per pack 2KL 1.19 (30.2) KL w/two KEYS 1.68 (42.7) Wallplates and Wallboxes 302 STAINLESS STEEL D or DEEP WALLBOX ADAPTER EXTENDS SHALLOW COMES WITH TAMPER-RESISTANT RECOMMENDED MINIMUM INTERNAL WALLBOX, USE WITH STAINLESS SCREWS and SPANNER TOOL DEPTH 2 3 /4" SINGLE COVER/GANG WALLPLATE CAT. NO COLOR Brown Ivory White CAT. NO I 6197-W or complete wallplate selection, see Section E. Key Lock Power Switches are not recommended for use on Master or Emergency Power Systems. SPECIICATIONS AND EATURES Key-operated locking mechanism for maximum tamper-proof operation in schools, institutions, public housing, trailer parks, loading docks, freight yards and other areas Chrome lock dome with 2 keys provided per switch Back and side wire terminals accept up to #14 #10 AWG copper or copper clad wire Large, slotted terminal screws with clamp-type back-wire terminals Triple-combination mounting screws for fast, easy installation Heavy-gauge rust-resistant mounting strap with steel grounding screw and self-grounding clip (self grounding when used in a properly grounded metal wallbox) Key removable in ON or O positions Meets NEMA WD-1, WD-6 & ANSI requirements Meets ederal Specifications WS-896 UL Listed (ile #E-7458) CSA Certified (ile #152105) Backed by a Limited Ten-Year Warranty 20A 120V 240V. 16 Amp Max. Environmental: lammability, Rated V2 10 To learn more about Leviton s outstanding offering of devices visit our Website at:

11 AC QUIET SWITCH EATURES Commercial Grade AC Quiet Switches LEVITON OERS A LARGE SELECTION O 15 AND 20 AMP COMMERCIAL SWITCHES, AVAILABLE IN A WIDE VARIETY O COLORS, WIRING OPTIONS AND OTHER EATURES. Back and Side Wired External clamp-type terminals for maximum wiring versatility. CSB1-20 shown Leviton s Commercial Grade switches are designed to offer outstanding reliability and top performance in commercial settings. Ideal applications include municipal facilities, government buildings, malls, department stores, hospital and health care facilities, office buildings, schools, colleges, universities, houses of worship and cultural institutions. eatures and Benefits Listed UL ederal Specification, WS-896 Heavy-duty pre-plated steel mounting strap for maximum strength All screws are brass combination-head for fast installation with Standard and Phillips head screwdrivers External clamp-type wiring terminals provides secure connection of solid or stranded wire for back or side wiring (CSB1 and CSB3) Backed by a Limited 10-Year Warranty Side Wired Sturdy, rugged, cost effective. CS120-2W shown ramed Toggle or neater finished appearance I shown Heavy-duty pre-plated steel mounting strap Large, brass double-drive combination screws for fast wiring and installation Large switch contacts for maximum conductivity Lighted Toggle Lights up,when power is off, easy to locate in darkened rooms LHI shown CSB1-15I External clamp-type terminal provides secure connection for back and side wiring Hospital Call Switch Turns on when toggle is pulled down with cord (included) shown or answers to technical questions, call Leviton s Techline at

12 15 and 20 AMP 120/277V 15 and 20 AMP CANADIAN 120/277V Commercial Grade AC Quiet Switches Back and Side Wired 120/277V AC Quiet Switches UR DESCRIPTION 15 AMP 20 AMP COLOR* Single-Pole Toggle CSB1-15 CSB A & 20A: I, W, A, G Double-Pole Toggle CSB2-15 CSB A: I, W, G 20A: I, W, A, G 3-Way Toggle CSB3-15 CSB A & 20A: I, W, A, G 4-Way Toggle CSB4-15 CSB A: I, W, A 20A: I, W, A, G CSB (21.8) 86 (21.8) CSB3-20G Side Wired 120/277V AC Quiet Switches UR DESCRIPTION 15 AMP 20 AMP COLOR* Single-Pole Toggle CS115-2 CS A & 20A: I, W, A, T, GY Single-Pole Hospital Call Switch A: Ivory Only Double-Pole Toggle CS215-2 CS A: I, W, GY 20A: I, W, A, T, GY, E Double-Pole Hospital Call Switch A: Ivory Only 3-Way Toggle CS315-2 CS A: I, W, A, T, GY 20A: I, W, A, T, GY, E 4-Way Toggle CS415-2 CS A: I, W, A, T, GY 20A: I, W, A, T, GY, E Single-Pole, ramed Toggle A & 20A: I, W, GY Double-Pole, ramed Toggle A: I, W 20A: I, W, GY 3-Way, ramed Toggle A & 20A: I, W, GY 4-Way, ramed Toggle A: I, W, A, T, GY 20A: I, W, GY Hospital Call Switch turns on when toggle is pulled down with cord (3-ft braided cord included) Side Wired Canadian 120/277V AC Quiet Switches R Note: Cat. No series is identified in Canada by the following catalog numbers: DESCRIPTION 15 AMP 20 AMP COLOR** See Canadian Color Single-Pole, ramed Toggle 1101-C A: I, W, B, G Double-Pole, ramed Toggle 1102-C A: I, W, B, G 3-Way, ramed Toggle 1103-C A: I, W, B, G 4-Way, ramed Toggle 1104-C A: I, W, B, G Wallplates NOTE: Cat. Nos. CSB1 and CSB3 feature external clamp-type wiring termination for back and side wiring THERMOPLASTIC 302 STAINLESS STEEL EMERGENCY (23.3) CS120-2W (23.4) I W or complete wallplate selection, see Section E. SPECIICATIONS AND EATURES Large head double-drive combination screws (Standard, Phillips) for fast wiring Heavy-gauge, rust-resistant steel mounting strap Accepts #14 #12 AWG copper or copper-clad wire Convenient break-off plaster ears for best alignment Large switch contacts for maximum conductivity UL Listed to meet the latest ederal Specification, WS-896 (ile #E-748) Meets all NEMA WD 1 & 6, and ANSI requirements CSA Certified (ile #LR-3413) Backed by a Limited 10-Year Warranty E *COLOR Basic Cat. Nos. shown above denote Brown color. Other colors available as listed, add suffix to catalog number as follows: Ivory (-I), White (-W), Almond (-A), Light Almond (T), Gray (-GY), Black (-E). ** CANADIAN COLOR or color selection, add suffix to catalog number as follows: Ivory (-I), White (-W), Brown (-B), and Gray (-G). 15A 20A V 240V 240V Environmental: lammability, Rated V2 To learn more about Leviton s outstanding offering of devices visit our Website at:

13 15 AMP 120V 15 AMP CANADIAN 347V Commercial Grade AC Quiet Switches Side Wired Lighted Toggle 15 AMP 120V AC Only UR DESCRIPTION CAT. NO. COLOR* Single-Pole Lighted Toggle 5501-LH 15A: I, W 3-Way Lighted Toggle 5503-LH 15A: I, W Surface Mounting, Bottom Wired 10 AMP 125V 5 AMP 250V UR DESCRIPTION CAT. NO. COLOR* Single-Pole, Surface Mounting 1210 I, W Slotted cover snaps in place Wood screw furnished for surface mounting Side Wired Canadian 15 AMP 347V AC UR DESCRIPTION CAT. NO. COLOR** See Canadian Color Single-Pole, ramed Toggle C 15A: I, W, B, G Double-Pole, ramed Toggle C 15A: I, W, B, G 3-Way, ramed Toggle C 15A: I, W, B, G 4-Way, ramed Toggle C 15A: I, W, B, G 0.92 (23.3) 5501-LHI Wallplates THERMOPLASTIC 302 STAINLESS STEEL I I W or complete wallplate selection, see Section E. EMERGENCY E (26.1) 5503-LHW SPECIICATIONS AND EATURES Quiet, reliable mechanical action Large head double-drive combination screws (Standard, Phillips) for fast wiring installation Accepts #14 #12 AWG copper or copper-clad wire Large switch contacts for maximum conductivity UL listed to meet the latest ederal Specification, WS-896 (ile #E-748) Meets all NEMA WD 1 & 6, and ANSI requirements CSA Certified (ile #LR-3413) Backed by a Limited 10-Year Warranty *COLOR Basic Cat. Nos. shown above denote Brown color except for Lighted Toggle Switches. Other colors available as listed, add suffix to catalog number as follows: Ivory (-I), White (-W). ** CANADIAN COLOR ** CANADIAN COLOR or color selection, add suffix to catalog number as follows: Ivory (-I), White (-W), Brown (-B), and Gray (-G) 15A 1 Environmental: lammability, Rated V2 or answers to technical questions, call Leviton s Techline at

14 15 AMP 120V Residential Grade AC Quiet Switches 4.20 (106.7) (53.9) 1.01 (25.7) Quickwire and Side Wired ramed Toggle 15 AMP 120V AC Quiet Switches UR DESCRIPTION CAT. NO. COLOR* Single-Pole 1451 I, W 3-Way 1453 I, W Single-Pole with grounding screw I, W, A, T, E 3-Way with grounding screw I, W, A, T, E 4-Way with grounding screw I, W, A Single-Pole, less ears with grounding screw I, W 3-Way, less ears with grounding screw I, W Note: Available in Convenience Packs. Quickwire and Side Wired Illuminated Toggle 15 AMP 120V AC UR DESCRIPTION CAT. NO. COLOR* Single-Pole Illuminated 1461-LHC Clear Toggle 3-Way Illuminated 1463-LHC Clear Toggle Note: Illuminated switches do not require a neutral wire (106.7) 2.09 (53.2) CO/ALR Side Wired ramed Toggle 15 AMP 120V AC UR DESCRIPTION CAT. NO. COLOR* Single-Pole with grounding screw I, W 3-Way with grounding screw I, W CSA CERTIIED CO/ALR or use with Aluminum Copperclad Copper (26.6) Note: CO/ALR devices are for connection to 12 or 10 AWG aluminum conductors. Wallplates THERMOPLASTIC EMERGENCY 302 STAINLESS STEEL 4.20 (106.7) 2.09 (53.2) I W or complete wallplate selection, see Section E E (26.6) (106.6) 1461-LHC (60.3) 1.01 (26.7) SPECIICATIONS AND EATURES aster installation with combination of side wiring and Quickwire push-in wiring Quickwire accepts conductors up to #12 AWG; #14 AWG in Canada Side wire accepts conductors up to #12 AWG Large head triple-drive combination screws (Standard, Phillips, Robertson) for fast wiring installation Impact-resistant, durable thermoplastic toggle and frame UL Listed (ile # E-7458) CSA Certified (ile #LR-3413) Backed by a Limited Two-Year Warranty *COLOR Basic Cat. Nos. shown above denote Brown color. Other colors available as listed, add suffix to catalog number as follows: Ivory (-I), White (-W), Almond (-A), light Almond (T), Black/Ebony (-E), Clear Toggle & rame (-LHC) 15A 1 Environmental: lammability, Rated V2 To learn more about Leviton s outstanding offering of devices visit our Website at: