Rotary vane vacuum pump(dry-running) Type T 4.4 T T V T /400V TS V

Size: px

Start display at page:

Download "Rotary vane vacuum pump(dry-running) Type T 4.4 T T V T /400V TS V"

Evan Baldwin
5 years ago
Views:

Operation Manual Rotary vane vacuum pump(dry-running) Type T 4.4 T 4.500 TF 4.4-24V TF 4.6-24V T 4.4-230V T 4.4-230/400V T 4.8-230V T4.8-230/400V T 4.8-500V T4.16-230/400V TS4.16-230V T 4.16-230V TS4.

1 Operation Manual Rotary vane vacuum pump(dry-running) Type T 4.4 T TF V TF V T V T /400V T V T /400V T V T /400V TS V T V TS /400V T /400V TS /400V T /400V TS /400V T /400V TS /400V T 4.60-Europa-230/400V T4.60-Brasilien-200/350V T4.60-USA-230/460V T 4.80-Europa-230/400V T4.80-Brasilien-200/350V T4.80-USA-230/460V T Europa-230/400V T4.100-Brasilien-200/350V T4.100-USA-230/460V T Europa-230/400V T4.140-Brasilien-200/350V T4.140-USA-230/460V T Europa-400/690V T4.250-Brasilien-200/350V T4.250-USA-230/460V T Europa-400/690V T4.360-Brasilien-200/350V T4.360-USA-230/460V T Europa-400/690V T4.500-Brasilien-200/350V T4.500-USA-230/460V Read carefully before starting the vacuum pump! Albert Fezer Maschinenfabrik GmbH Hauptstraße D Esslingen) Tel: (0711) Fax (07 11) fezer.com Internet: BA-Nr.:

6 DC T4.16, T4.25, T4.40, T4.50 T4.60, T4.

500 Dry-running compressors are used for

Their characteristics apply up to a height

Inlet air must be standard dry atmospheric

2 1 Safety Regulations Please comply with Accident Prevention Regulations VBG 16, Compressors, in particular Section III Installation and IV Operation plus VBG 4 Electrical equipment and tools. Pumps may only be converted or modified after approval by the manufacturer. 2 Application T4.4, T4.8 TF4.4 DC, TF4.6 DC T4.16, T4.25, T4.40, T4.50 T4.60, T4.80, T4.100, T4.140 T4.250, T4.360 T4.500 Dry-running compressors are used for generating a vacuum. Their characteristics apply up to a height of 800 m above sea level. Inlet air must be standard dry atmospheric air. The pumps are dry-running. The inlet air should not include any oil mist. BA T4.4-T4.500, Issue 06/2014 page 2/39

3 Transport and storage T 4.4: 7 kgs T 4.

3 3 Transport and storage T 4.4: 7 kgs T 4.8: 11,5 kgs TF4.4 DC TF4.6 DC T4.60: 69 kgs T4.80: 69 kgs T4.100: 101 kgs T4.140: 111 kgs T4.16: T4.25: T4.40, T4.50: 22,4 kgs 26 kgs 39 kgs. T4.250: 270 kgs T4.360: 280 kgs T4.500:500kgs BA T4.4-T4.500, Issue 06/2014 page 3/39

4 Connection and installation T4.4, TF4.4 DC, TF4.6 DC: A>100mm T4.8, T4.

50: A>100mm Ensure correct dimensions (see Table) and clean pipelines.

Minimum pipeline diameters should be suitable for threaded connections.

It is recommended to install the pump with ample access for maintenance.

air ventilation. For installation under acoustic canopies revert to Fa. Fezer.

4 4 Connection and installation T4.4, TF4.4 DC, TF4.6 DC: A>100mm T4.8, T4.16: A>100mm T4.25, T4.40, T4.50: A>100mm Ensure correct dimensions (see Table) and clean pipelines. Keep connections free from oil, grease, water and any other contamination. Minimum pipeline diameters should be suitable for threaded connections. Use next higher diameter for pipe lengths of 2 m and above. It is recommended to install the pump with ample access for maintenance. Install pump with a minimum clearance of 10 cm to adjacent walls for full cooling air ventilation. For installation under acoustic canopies revert to Fa. Fezer. Ensure clear inlet to the motor fan and clear exit of cooling air to avoid internal temperatures exceeding 45 C. T4.60, T4.80, T4.100, T4.140: T4.250, T4.360,T4.500: A>100mm A>400mm BA T4.4-T4.500, Issue 06/2014 page 4/39

5 5 Commissioning Remove caps. Do not connect to pipeline system. a SW BA T4.4-T4.500, Issue 06/2014 page 5/39 b T4.4, T4.8, TF4.4 DC, TF4.6 DC: a= 4mm SW=6mm b= T20 T4.16, T4.25, T4.40, a=6mm T4.50: SW=5mm b= 7mm

Have motor connected by a qualified electrician based on the circuit diagram (in connecting box):

Start motor briefly to check rotation (arrow on enclosure).

6 Have motor connected by a qualified electrician based on the circuit diagram (in connecting box): Check for correct voltage and frequency. Start motor briefly to check rotation (arrow on enclosure). Reverse phases in case of incorrect rotation. For single-phase a.c. motors including a temperature monitor check automatic restart after cooling in case of overtemperature. Connect inlet line. Set vacuum control valve (Attention: special accessories) to operating values. Do not exceed maximum values stated on rating plate. T4.4; T4.8 TF4.4 DC, TF4.6 DC: BA T4.4-T4.500, Issue 06/2014 page 6/39

7 T4.60. T4.80, T4.100, T4.140: T4.16, T4.25, T4.40, T4.50 T4.250,T4.360 T4.500 T4.4, T4.8, T4.16, T4.25, T4.40, T4.50, T4.60, T4.80, T4.100, T4.140: T4.250, T4.360, T4.500: BA T4.4-T4.500, Issue 06/2014 page 7/39

8 D1 D2 T4.4: D1=1/4, D2=1/2 T4.16: D1=1/2, D2=3/4 T4.8: D1=3/8, D2= ¾ T4.25, T4.40: D1=3/4, D2=1 T4.50: D1=1, D2=11/2 TF4.4 DC, TF4.6 DC D1 D2 T4.60, T4.80: D1=1, D2=11/2 T4.100, T4.140: D1=11/2, D2=2 BA T4.4-T4.500, Issue 06/2014 page 8/39

Harmful particles can be found in pores, grooves and gaps on the vacuum pump. Danger for health when disassembling the pump. Danger fort the environment.

9 T4.250 T4.360 T Taking out of circulation and disposal Disassembling and disposal GEFAHR If the pump was used for gases charged with harmful particles, then the filter is also contaminated with them. Harmful particles can be found in pores, grooves and gaps on the vacuum pump. Danger for health when disassembling the pump. Danger fort the environment. When disassembling the pump always wear safety clothing. The vacuum pump has to be decontaminated before disposal. ATTENTION The filter spring (125) can jump up when being release. Danger of injuring the eyes. When dealing with filter springs always wear safety goggles. Make sure, that materials and parts considered as special waste are separated from the vacuum pump. Make sure, that the pump is not contaminated by harmful substances. The parts being used for production of the pump do not contain harmful materials as far as can be determined when this manual was printed. Please dispose of special waste as per the current regulations The vacuum pump can be disposed as scrap metal BA T4.4-T4.500, Issue 06/2014 page 9/39

7 Maintenance Maintain pump regularly to achieve the best operating results. Maintenance intervals will depend on the pump s use and ambient conditions.

10 7 Maintenance Maintain pump regularly to achieve the best operating results. Maintenance intervals will depend on the pump s use and ambient conditions. Before commencing maintenance, remove mains plug from socket to avoid unintentional restarting. - The filter cartridges are inserted behind the side cover SD. Clean depending on dust accumulation. Blow out filterfrom inside to outside (do not rinse). - Replace blocked, oily or greasy cartridges. - Blow out dirt in cooling air channel KK by compressed air. - The vanes are subject to wear due to abrasion from the walls of the enclosure. - Check vane width every 3000 operating hours or annually (for minimum widths see Table). Remove side cover SD for this. - On replacement blow out enclosure by dry compressed air. - Roller bearings are prelubricated and will not require maintenance. Replace by original roller bearings only. T4.4, T4.8: BA T4.4-T4.500, Issue 06/2014 page 10/39

>11mm >12,5mm Amax. <11mm <12,5mm SET: No. 2.41.2.0169 No. 2.41.2.0170 BA T4.

11 T4.4, TF4.4 DC, TF4.6 DC, T4.8: T T4.4, T4.8 TF4.4 DC, TF4.6 DC D: 25mm 30mm H: 24mm 32mm No.: T4.4, T4.8 TF4.4 DC, TF4.6 DC Amin. >11mm >12,5mm Amax. <11mm <12,5mm SET: No No BA T4.4-T4.500, Issue 06/2014 page 11/39

12 T4.16, T4.25, T4.40, T4.50: T4.16 T4.25, T4.40, T4.50 D: 58mm 64mm H: 40mm 70mm No.: T4.16 T4.25 T4.40, T4.60, T4.80: T4.50 Amin. >21mm >28mm >28mm Amax. <21mm <28mm <28mm SET: BA T4.4-T4.500, Issue 06/2014 page 12/39

T4.60, T4.80, T4.100, T4.140: T4.60, T4.80 T4.

13 T4.60, T4.80, T4.100, T4.140: T4.60, T4.80 T4.100, T4.140 F1 (Standard) F2 (Standard) F2* (Polyester) F G. BA T4.4-T4.500, Issue 06/2014 page 13/39

14 T4.60 T4.80 T4.100 T4.140 Amin. >21mm >26mm >26mm >31mm Amax. <21mm <26mm <26mm <31mm SET: BA T4.4-T4.500, Issue 06/2014 page 14/39

15 T4.60, T4.80: T4.100, T4.140: No No x7g BA T4.4-T4.500, Issue 06/2014 page 15/39

16 T4.250, T4.360: T4.250 BA T4.4-T4.500, Issue 06/2014 page 16/39

T4.250 No. 2.41.2.0105 F1 (Polyester) T4.

250 No. 2.41.2.0247 T4.360 No. 2.41.2.0505 BA T4.

17 T4.250 No F1 (Polyester) T4.250 No x No T4.250 No T4.360 No BA T4.4-T4.500, Issue 06/2014 page 17/39

18 No BA T4.4-T4.500, Issue 06/2014 page 18/39

19 T4.500: T4.500: No BA T4.4-T4.500, Issue 06/2014 page 19/39

20 No No No BA T4.4-T4.500, Issue 06/2014 page 20/39

21 BA T4.4-T4.500, Issue 06/2014 page 21/39

A SA SD KK B VR GD GB Housing Suction connection Lateral lid Cooling channel Ventilation wheel Vacuum regulation valve (special design) Housing lid Housing ground Techn. Data at 50 Hz T4.4 230V T4.

Vacuum (mbar) -850-850 -850-850 -850-850 -850-850 -700 Motor rating (kw) 0,18 0,18 0,35 0,35 0,55 0,55 0,75 1,25 1,25 Motor rpm (min -1 ) 2750 2800 2700 2800 1370 1420 1420 1420 1420 Pipework up to

22 A SA SD KK B VR GD GB Housing Suction connection Lateral lid Cooling channel Ventilation wheel Vacuum regulation valve (special design) Housing lid Housing ground Techn. Data at 50 Hz T V T /400V T V 500V T /400V T V T /400V T /400V T /400V T /400V Suction capacity (m³/h) 4,1 4,1 8,0 8, Max. Vacuum (mbar) Motor rating (kw) 0,18 0,18 0,35 0,35 0,55 0,55 0,75 1,25 1,25 Motor rpm (min -1 ) Pipework up to 2m ¼ ¼ 3/8 3/8 ½ ½ ¾ ¾ 1 Pipework from 2m ½ ½ ¾ ¾ ¾ ¾ 1 11/2 11/2 Acoustic level (db(a)) Protection class IP54 IP54 IP54 IP54 IP54 IP54 IP54 IP54 IP54 Efficiency class IE1 IE1 IE1 IE1 IE1 IE1 IE1 IE1 IE1 T4.4 T4.8 T4.16 T4.25 T4.40 T4.50 Techn. Data at 60 Hz 230/400V 230/400V 230/400V 230/400V 230/400V 230/400V Suction capacity (m³/h) --- 4, , Max. Vacuum (mbar) Motor rating (kw) --- 0, , ,70 0,90 1,5 1,50 Motor rpm (min -1 ) Pipework up to 2m --- ¼ --- 3/8 --- ½ ¾ ¾ 1 Pipework from 2m --- ½ --- ¾ --- ¾ 1 11/2 11/2 Acoustic level (db(a)) Protection class --- IP IP IP54 IP54 IP54 IP54 Efficiency class --- IE1 --- IE1 --- IE1 IE1 IE1 IE1 Measurement / Weight: T4.4 T4.4 T4.8 T4.8 T4.16 T4.16 T4.25 T4.40 T4.50 Length (mm) Width (mm) Height (mm) Weight (kg) ,5 11,5 22,5 22, BA T4.4-T4.500, Issue 06/2014 page 22/39

23 Vacuum pumps with silencer: Techn. Data at 50 Hz TS4.16 TS4.16 TS4.25 TS4.40 TS V 230/400V 230/400V 230/400V 230/400V Suction capacity (m³/h) Max. Vacuum (mbar) Motor rating (kw) 0,55 0,55 0,75 1,25 1,25 Motor rpm (min -1 ) Pipework up to 2m ½ ½ ¾ ¾ 1 Pipework from 2m ¾ ¾ 1 11/2 11/2 Acoustic level (db(a)) Protection class IP54 IP54 IP54 IP54 IP54 Efficiency class IE1 IE1 IE1 IE1 IE1 Techn. Data at 60 Hz TS /400V TS /400V TS /400V TS /400V Suction capacity (m³/h) Max. Vacuum (mbar) Motor rating (kw) --- 0,70 0,90 1,5 1,50 Motor rpm (min -1 ) Pipework up to 2m --- ½ ¾ ¾ 1 Pipework from 2m --- ¾ 1 11/2 11/2 Acoustic level (db(a)) Protection class --- IP54 IP54 IP54 IP54 Efficiency class --- IE1 IE1 IE1 IE1 TS4.16 TS4.16 TS4.25 TS4.40 TS4.50 Measurement / Weight: 230V 230/400V 230/400V 230/400V 230/400V Length (mm) Europe: Width (mm) Height (mm) Weight (kg) Techn. Data at 50 Hz T4.60 T4.80 T4.100 T4.140 T4.250 T4.360 T4.500 Suction capacity (m³/h) Max. Vacuum (mbar) Motor rating (kw) 2,2 2,2 3,0 4,0 5,5 11,0 15,0 Motor rpm (min -1 ) Pipework up to 2m /2 21/2 21/2 4 Pipework from 2m 11/ Acoustic level (db(a)) Protection class IP54 IP54 IP54 IP54 IP54 IP54 IP54 Efficiency class IE2 IE2 IE2 IE2 IE2 IE2 IE2 Techn. Data at 60 Hz T4.60 T4.80 T4.100 T4.140 T4.250 T4.360 T4.500 Suction capacity (m³/h) 66 78, Max. Vacuum (mbar) Motor rating (kw) 2,5 2,5 3,6 4,8 6,4 13,2 18,0 Motor rpm (min -1 ) Pipework up to 2m /2 21/2 21/2 4 Pipework from 2m 11/ Acoustic level (db(a)) Protection class IP54 IP54 IP54 IP54 IP54 IP54 IP54 Efficiency class IE2 IE2 IE2 IE2 IE2 IE2 IE2 Measurement / Weight: T4.60 T4.80 T4.100 T4.140 T4.250 T4.360 T4.500 Length (mm) Width (mm) Height (mm) Weight (kg) BA T4.4-T4.500, Issue 06/2014 page 23/39

24 Brazil: Techn. Data at 50 Hz T4.60 T4.80 T4.100 T4.140 T4.250 T4.360 T4.500 Suction capacity (m³/h) Max. Vacuum (mbar) Motor rating (kw) 2,2 2,2 3,0 4,0 5,5 11,0 15,0 Motor rpm (min -1 ) Pipework up to 2m /2 21/2 21/2 4 Pipework from 2m 11/ Acoustic level (db(a)) Protection class IP54 IP54 IP54 IP54 IP54 IP54 IP54 Efficiency class IE2 IE2 IE2 IE2 IE2 IE2 IE2 Techn. Data at 60 Hz T4.60 T4.80 T4.100 T4.140 T4.250 T4.360 T4.500 Suction capacity (m³/h) 66 78, Max. Vacuum (mbar) Motor rating (kw) 2,5 2,5 3,6 4,8 6,4 13,2 18,0 Motor rpm (min -1 ) Pipework up to 2m /2 21/2 21/2 4 Pipework from 2m 11/ Acoustic level (db(a)) Protection class IP54 IP54 IP54 IP54 IP54 IP54 IP54 Efficiency class IE2 IE2 IE2 IE2 IE2 IE2 IE2 Measurement / Weight: T4.60 T4.80 T4.100 T4.140 T4.250 T4.360 T4.500 Length (mm) Width (mm) Height (mm) Weight (kg) USA: Techn. Data at 50 Hz T4.60 T4.80 T4.100 T4.140 T4.250 T4.360 T4.500 Suction capacity (m³/h) Max. Vacuum (mbar) Motor rating (kw) 2,2 2,2 3,0 4,0 5,5 11,0 15,0 Motor rpm (min -1 ) Pipework up to 2m /2 21/2 21/2 4 Pipework from 2m 11/ Acoustic level (db(a)) Protection class IP54 IP54 IP54 IP54 IP54 IP54 IP54 Efficiency class IE2 IE2 IE2 IE2 IE2 IE2 IE2 Techn. Data at 60 Hz T4.60 T4.80 T4.100 T4.140 T4.250 T4.360 T4.500 Suction capacity (m³/h) 66 78, Max. Vacuum (mbar) Motor rating (kw) 2,5 2,5 3,6 4,8 6,4 13,2 18,0 Motor rpm (min -1 ) Pipework up to 2m /2 21/2 21/2 4 Pipework from 2m 11/ Acoustic level (db(a)) Protection class IP54 IP54 IP54 IP54 IP54 IP54 IP54 Efficiency class IE2 IE2 IE2 IE2 IE2 IE2 IE2 Measurement / Weight: T4.60 T4.80 T4.100 T4.140 T4.250 T4.360 T4.500 Length (mm) Width (mm) Height (mm) Weight (kg) BA T4.4-T4.500, Issue 06/2014 page 24/39

25 24V-Pumps: Techn. Data TF4.4-24V TF4.6-24V Suction capacity (m³/h) 4,1 6,0 Max. Vacuum (mbar) Motor rating (kw) 0,17 0,25 Motor rpm (min -1 ) Pipework up to 2m ¼ ¼ Pipework from 2m ½ ½ Acoustic level (db(a)) Protection class IP 44 IP 44 Measurement / Weight: TF4.4-24V TF4.6-24V Length (mm) Width (mm) Height (mm) Weight (kg) Scale drawings: TF4.4-24V, TF4.6-24V: BA T4.4-T4.500, Issue 06/2014 page 25/39

26 T4.4-T4.8: T4.16-T4.50: mm a b d1 e f f1 g g1/g2 h h1 h2 h3 I k k1 o q T G1/ , ,5 151,5 T G3/ ,5 173 T G3/ ,5 192 T G ,5 192 BA T4.4-T4.500, Issue 06/2014 page 26/39

T4.60-T4.140: a b b1 c d1 e1 f g g1 G2 h h1 h3 h4 i k k1 k2 km kl o p T4.60 326 190 95 30 G1 85 250 353 195 T4.60 326 190 95 30 96 397 415 448 312 709 46 289 T4.80 326 190 95 30 G1 85 250 353 195 T4.

27 T4.60-T4.140: a b b1 c d1 e1 f g g1 G2 h h1 h3 h4 i k k1 k2 km kl o p T G T T G T T ,5 30 G11/ T , T ,5 30 G11/ T , BA T4.4-T4.500, Issue 06/2014 page 27/39

T4.250-4.500 a b c5 d d1 e e1 g h h1 h2 h3 i k km o r s T4.250 645 380 40 G 2 G 2 ½ 423 216 612 225 388,5 426 508 125 714 <1192 171,5 50 M10 T4.

28 T a b c5 d d1 e e1 g h h1 h2 h3 i k km o r s T G 2 G 2 ½ , < ,5 50 M10 T G 2 G 2 ½ , < ,5 50 M10 T G 2 G 2 ½ < M12 BA T4.4-T4.500, Issue 06/2014 page 28/39

29 Spare parts list for pumps T4.4-T4.8, TF4.4-24V, TF4.6-24V: Pos. Description: T4.4 T4.8 1 motor washer locking screw gasket gasket pump body stud rotor felt circular plate carbon vanes filter cartridge lid socket head screw nozzle vacuum regulating valve blow-off valve If you place an order please indicate type and pos.-no. BA T4.4-T4.500, Issue 06/2014 page 29/39

30 Spare parts list for pumps T4.16 T4.50 Pos Description: T4.16 T4.25 T4.40 Pos Description: T4.16 T4.25 T sealing rotor O-ring clamping disc protecting hood star-tolerance-ring rubber element toothed spring 88 protecting hood washer socket head screw rubber buffer pump body socket head screw socket head screw socket head screw carbon vanes edge protection locating peg foot lid rubber element socket head screw spacing collar gasket socket head screw fan washer key valve disc washer 102 rubber bushing shaft end bold spacer tube filter cover ring screw 67 leaf spring 124 vacuum regulating valve filter cartridge silencer socket head screw 132 locking screw BA T4.4-T4.500, Issue 06/2014 page 30/39

31 If you place an order please indicate type and pos.-no. Spare parts list for pumps T4.60-T4.80: BA T4.4-T4.500, Issue 06/2014 page 31/39

32 Spare parts list for pumps T4.60 T4.80: Pos. Description T4.60 T4.80 Pos. Description T4.60 T gasket set cover pump body gasket rotor socket-head screw. M6x15 11 carbon vanes (KIT) washer lid handle lid cooler bearing cover gasket bearing cover gasket gasket gasket seal socket-head screw.. M6x80 26 compensating disc socket-head screw. M6x45 27 shaft sealing ring DF 35x45x socket-head screw. M6x15 28 ball bearing RS C3 TA stud 29 ball bearing NU 205/ZS cover set distance disc 25x33x0, connecting piece hexagon head bolt 146 gasket clamping disk 148 socket-head screw. M6x65 39 clamping disk 149 rubber buffer hexagon head bolt M 6x washer hexagon head bolt M 6x covering hood close tolerance grooved pin 5x20 DIN air guide hood key A 8x7x ventilator hood connection flange socket-head screw M6x20 52 washer 171 socket-head screw M6x75 53 socket-head screw M8x socket-head screw 57 washer A 13x40x5 173 countersunk bolt 58 shaft end bolt spring disk 61 filter housing rubber buffer gasket threaded pin 8x20 64 stud 178 rring nut M 10 Din stud 182 flanges silencer tube rubber bushing WN filter cartridge C1112/2 (1x) ² pipe rivet leaf spring washer A15 DIN filter-cover socket-head screw 75 gasket washer 76 gasket stud M 10x25 DIN filter holder washer 10,5 DIN socket-head screw M6x hex. nut M 10 DIN washer 195 coupling (Mot) spiral pin coupling disk filter cartridge C 713 (1x)² coupling with fan stud 210 lüfterhaube, komplett hex. nut M ventilator hood, compl washer 288 sealing ring lock washer 293 blow-off valve socket-head screw. M6x grease, Ambligon TA15/2 (tube 8g) If you place an order please indicate type and pos.-no. 1 Seal kit: Pos.:20,24,62,75,76,104,125,126,127,146,288 BA T4.4-T4.500, Issue 06/2014 page 32/39

33 Spare parts list for pumps T T4.140 BA T4.4-T4.500, Issue 06/2014 page 33/39

34 Spare parts list for pumps T4.100-T4.140: Pos. Description T4.100 T4.140 Pos. Description T4.100 T seal kit 1 97 washer 6 pump body socket-head screw 9 rotor dust seperator cover carbon vanes(kit) gasket lid handle lid cooler gasket gasket bearing cover pressure connection box bearing cover gasket gasket gasket seal gasket compensating disk socket-head screw 26 shaft-sealing ring socket-head screw 27 ball-bearing 3205/C connection piece ball-bearing NU 205/ZS gasket Set distance disk socket-head screw 38 clamping disk 149 rubber buffer countersunk bolt 161 covering hood hexagon head bolt 163 air guide hood hexagon head bolt 165 ventilator hood close tolerance grooved pin 166 ventilator hood key 171 socket-head screw 50 connection flange socket-head screw 52 washer 173 countersunk bolt 53 socket-head screw 174 spring disk 55 distance disk rubber buffer coupling with fan threaded pin 57 washer 178 ring screw shaft end bolt flange filter housing rubber bushing gasket pipe rivet stud 186 washer 65 stud 188 socket-head screw 67 silencer tube Stud 68 filter cartridge C 1112/2 (2x)² washer 71 leaf spring hex. nut 72 blind rivet coupling (Mot) filter cover coupling disk gasket oil-pipe gasket connecting screw filter holder hollow holding screw socket-head screw 247 sealing ring washer 250 grease nipple spiral pin vacuum regulating valve filter cartridge C 718 (1x)² blow-off valve stud --- grease, Amblygon TA15/ (grease press, 50g) 94 hex. nut 95 washer If you place an order please indicate type and pos.-no. 1 seal kit Pos.: 17,20,24,62,75,76,86,104,122,125,146 2 necessary order quantity / maintenance BA T4.4-T4.500, Issue 06/2014 page 34/39

35 Spare parts list for pumps T : BA T4.4-T4.500, Issue 06/2014 page 35/39

36 Spare parts list for pumps T T4.360 Pos. Description T4.250 T4.360 Pos. Description T4.250 T seal kit Spacer set Connection flange Shaft sealing ring, DF45x62x Motorflange seal, 45x Covering hood (VT) gasket Covering hood (DT) Conduit graese Covering hood (DVT) Filter housing(vt + DVT) Air guide covering ring Filter housing(dt) Covering hoood Filter cartridge (1x) Socked head screw, DIN 912 M6x Socket head screw, DIN912 M10x30 8 Spring disk 209 Filter cover Socked head screw, DIN912, M10x Stud, DIN939 M8x50 10 Distance disk Stud, DIN939 M8x70 11 Rubber buffer Handle Shaft end bolt gasket Socked head screw, DIN912, gasket M6x40 14 Ring unit 219 Connecting flange Ventilator hood Socket head screw, DIN912 M8x35 20 Socked head screw, DIN912, M6x Grease nipple, DIN Coupling with fan Hose connector washer 228 Lubrication line Coupling ring Fixing sleeve Centring bush Flexible hose Hex.-head screw DIN439M10x Non return valve-optional Stud DIN 939 M10x gasket Rubber element Socked head screw DIN912 M8x50 35 washer 244 Rubber element Hex.-head screw DIN933 M10x Filter housing (VT) Stud DIN939 M16x Filter housing(dt+dvt) Grease pistol Filter cover Holder gasket Pump body Silencer rotor Socked head screw DIN912 M8x Rotor vanes-kit Blow-off valve (VT) key, DIN6885 B10x8x Pressure relief valve Lid right Vacuum relilef valve Lid left Cap - Optional Bearing cover Dust seperator- Optional Bearing cover Stud DIN939 M12x Socket head screw, DIN 912 M6x washer DIN Hex. head screw, DIN933 M8x Hex. Nut DIN934 M Straight pin, DIN1472 5x Spring disc, DIN137 A Grease distribution washer Coupling motor side, Ø38mm (B5/300) Coupling motor side, Ø42mm (5.5 11kW) Coupling motor side Ø48mm (15kW) Ball bearing Intermediate flange (B5/300) Ball bearing Socked head screw DIN 912 M10x25 If you place an order please indicate type and pos.-no. 1 seal kit: Pos.: 133,138,217,218,317 2 necessary order quantity / maintenance BA T4.4-T4.500, Issue 06/2014 page 36/39

37 Spare parts list for pumps T4.500 BA T4.4-T4.500, Issue 06/2014 page 37/39

38 Spare parts list for pumps T4.500 Pos. Description T4.500 Pos. Description T Gasket set 1 96 Socket head screw 1 Pump body washer 5 Rotor Filter housing Rotor vanes (kit) Socket head screw 9 key cover lid Socket head screw 11 lid Filter cartridge C18133 (1x) Bearing cover gasket Bearing cover Filter cover Bearing cover Leaf spring Socket head screw 164 Coupling motor side, Ø48mm Socket head screw 164 Coupling motor side, Ø55mm Hex. head screw 164 Coupling motor sideg,ø60mm Grooved pin Threaded pin Grease distribution washer Coupling disk Shaft end bolt Motor flange, B5/ Distance disk Motor flange, B5/ bearing Motor flange, B5/ ball bearing Hex. nut 26 O-ring Stud Distance disk 45x55x0, washer Distance disk 45x55x0, Rubber buffer Distance disk 65x85x0, Stud Distance disk65x85x0, Hex. Head screw 31 Compensating disk Pressure relief valve, 1-1,7bar Locking ring Blow-off valve, 0,15bar Shaft sealing ring Pressure relief valve, <1bar seal Vacuum relief valve Conduit-grease Silencer housing Grease nipple Socket head screw. M8x gasket Socket head screw M8x Protective hood Sieve-tube dompener Silencer sponge Socket head screw 453 gasket Spacing collar Connecting flange Foot Socket head screw 57 Socket head screw Grease, Ambligon TA 15/2 (Grease press, 50g) 58 Ring screw Connection flange Socket head screw 68 washer Coupling with fan Filter housing Connection flange gasket Socket head screw 94 gasket Filter cover If you place an order please indicate type and pos.-no. 1 seal kit Pos.: 26,35,40,89,94,119 2 necessary order quantity / maintenance BA T4.4-T4.500, Issue 06/2014 page 38/39

39 EC Declaration of Conformity as per enclosure II A In accordance with the Machines 2006/42 EC CE-Regulations for: Low voltage 2006/95/EC Electromagnetic compatibility 2004/108/EC Construction of Machine: Vacuum pump T 4.4 T TS 4.16 TS 4.50 TF V TF V Is developed, constructed and manufactured in accordance with the above-mentioned CE-Regulations, in exlusive responsibility of: Albert Fezer Maschinenfabrik GmbH Hauptstrasse D Esslingen The following harmonized standards are applied: Document-No. Description Issue DIN EN Compressors and vacuum pumps, safety requirements DIN EN Compressors and vacuum pumps, safety requirements DIN EN ISO 3744 Acoustics- Determination of sound power levels and sound energy levels of noise sources The technical documentation and original manuals are available through Albert Fezer Maschinenfabrik GmbH. Name of the undersigned: Georg Komposch Berthold Eger Address: Alber Fezer Maschinenfabrik GmbH Albert Fezer Maschinenfabrik GmbH Place of issue: Esslingen Esslingen Date of issue: Task of the undersigned: general manager person in charge for documentation When integrating the vacuum pump into a higher-ranking machine or equipment the manufacturer (who can also be the operator) of the higher-ranking machine or equipment has to carry out the conformity test process for the higher-ranking machine or equipment as per the regulations machines 2006/42/EC, fill in the declaration of conformity and attach the CE label. BA T4.4-T4.500, Issue 06/2014 page 39/39

RVDRT & RVVRT Model 404 to 408

RVDRT & RVVRT Model 404 to 408 All-Star 00% Oil Free Rotary Vane Pump & Compressor RVDRT & RVVRT Model 0 to 08 0 0 0 ( version RVDRT* pcs ) 30 3 3 33 3 35 0 (version RVVRT ) 3 ( version RVDRT ) 50 60 ( version RVDRT ) 70 ( version RVVRT