MineDuct. Engineered Performance Ventilation Systems is a world leader in mine ventilation. quality makes a difference
|
|
- Brittany Edwards
- 5 years ago
- Views:
Transcription
1 FlexLine Flexible fabric products manufactured for mine and tunnel ventilation. Lightweight, flexible, histrength, durable, easy to handle and capable of quick installation.
2 MineDuct EP Ventilation s MineDuct Spiral is an extremely durable flexible ducting product used in negative pressure ventilation or as elbows in positive pressure ventilation systems. MineDuct is manufactured in diameters from 8 to 72 (200mm to 1800mm) in standard section lengths of 25ft (7.5 metres). The diameter of MineDuct and distance between the spiral wire helix (pitch) determine the negative pressure capacity. MineDuct is offered in a range of pitch options from 2 to 6 (50mm to 150mm).
3 MineVent q u a l i t y m a ke s a d i f f e r e nc e Engineered Performances MineVent high pressure ventilation ducting is used worldwide to supply positive pressure ventilation for mines and tunnels. MineVent is produced in standard diameters from 12 to 120 (300mm to 3050mm) in section lengths up to 1,640ft (500 metres). EP Ventilation s extensive line of PVC extrusion coated fabrics are designed and produced in -house to meet the demands of underground ventilation. Our PVC fabrics offer exceptional pressure capability, abrasion and tear resistance (see Fabric Specifications). Engineered Performances entire line of products meet international Flame Resistance standards such as NRC, DIN, MSHA. Anti -Static coated fabrics are also produced and certified to international standards for low surface resistivity as required by coal mines and gaseous tunnels. EP Ventilation s MineVent is complimented with a selection of hanging accessories and levelling wires for Drill & Blast mines and tunnels. Our fabric suspension design is integral to the MineVent and provides consistent linear support along the entire specified length. This design prevents sagging from weight and provides improved airflow as a result. A-4 Suspension Hook Suspension EP Ventilation also offers MineVent vertical shaft ducting that is fully supported on cables with hardware engineered to minimize install time.
4 MineVent q u a l i t y m a ke s a d i f f e r e nc e Engineered Performance s MineVent high pressure ducting is designed to perform in the world s most technical ventilation applications. Our experience is consistent with international standards such as SIA196 in recommending a safety factor of 10 for the ventilation duct s maximum working pressure relative to the duct s burst pressure. Working pressures beyond the safety factor of 10 are possible but not recommended due to increase in leakage, power consumption and the capital cost Engineered Performance s MineVent PRESSURE CHART EP Ventilation can assist in the design of your mine ventilation system and provide recommendations on a complete system including Fan s, Ducting and accessories. Our system design recommendations are focused on worker safety, maximized air flow to the face, low leakage at ducting joints, minimized power costs, as well as optimized fan arrangements and sound attenuation.
5 TwinDuct EP Ventilation s TwinDuct oval ventilation ducting is suitable for shorter runs up to 1000 metres (3,280ft). TwinDuct is designed to replace MineVent round flexible ducting in tight headings that require additional headroom with maximum air flow. TwinDuct offers 20% improvement in headroom with its unique design that decreases damage to the ducting and allows engineers to maximize the size of underground equipment with out decreasing the size of ventilation ducting. A full range of oval to round transitions are available to accommodate your specific needs. Refer to EP Ventilation s Accessories information for more details. TwinDuct is available in diameters ranging from 18 to 60 (450mm to 1500mm) and standard section lengths up to 100ft (30 metres). Nominal Diameter Equivalent to Round TwinDuct Dimensions A B 18 / 460mm / 600mm / 750mm / 800mm / 900mm / 1100mm / 1220mm / 1400mm / 1500mm EP Ventilation s TwinDuct is complimented with our fabric suspension design that is integrally welded to the Twin Duct and provides consistent linear support along the entire specified length. This design prevents sagging from weight and provides improved airflow as a result. Grommet with Carabiner Suspension TwinDuct Suspension Configurations T 1 Suspension: Two suspension seams at 11 and 1 o clock position T 2 Suspension: Two suspension seams at 12 and 3 o clock position T 3 Suspension: One suspension seams at 12 o clock position
6 Couplings EP Ventilation offers the industry s most complete line of coupling options for MineVent, Twinduct, Oval, MineDuct Spiral and Accessories. High efficiency, leakproof couplings are critical to the successful installation of ventilation systems. EP Ventilation has soft coupling options for the ultimate in low resistance and leakage, and numerous options compatible with End Rings on the air inlet and air outlet of the ducting. EP Ventilation couplings are precisely engineered to reduce installation time and minimize air leakage at the joint. LOW RESISTANCE SOFT COUPLINGS: Zipper Coupling QuickSnap Coupling Hook & Loop Coupling END RING COUPLING WITH REINFORCING OPTIONS: B Flex PVC R Flex PVC Multi Clip Interlocking End Rings SD Metal Clamp High Pressure Metal Clamp
7 Accessories EP Ventilation offers a variety of accessories to complement our MineVent, MineDuct and TwinDuct product lines. Standard length accessories are engineered according to best practices for underground ventilation. Manufactured with Yellow Hi Strength X45 fabric (21 oz/yd2), standard length accessories are designed to provide smooth airflow within the accessory, reducing turbulence and damage to the accessory caused by potential flutter. Standard length accessories offer premium performance and product life in the most challenging underground environments. MineVent Tee MineVent Lateral Wye MineVent Wye TwinDuct Lateral Wye TwinDuct Wye
Mine and Tunnel. Ventilation Products
Mine and Tunnel Ventilation Products Brattice VentaTex & VentaLene Series Fabrics Strength in construction. Strength in quality. Strength in experience. Brattice by ABC Industries, Inc. offers mine and
More informationSERPENT. A complete ventilation system for successful tunneling and mining operations, including system design, fan station, ducting and installation.
SERPENT A complete ventilation system for successful tunneling and mining operations, including system design, fan station, ducting and installation. CONTROL THE AIR. CONTROL YOUR BUSINESS. THE SERPENT
More informationventilation for mines and tunnels The art of transporting fresh air into mines
ventilation for mines and tunnels The art of transporting fresh air into mines Our history could fill an entire book The foundations for Protan s business were laid between the wars and the production
More informationFlowCon Fabric Air Diffusers
FlowCon Fabric Air Diffusers 204 Hallberg St. PO BOX 507 Delavan, WI. 53115 Installation, Operation and Maintenance Manual Project Title: Location Name: Date: Service Contractor: Telephone Number: CONTENTS
More informationOS10 OIL SUCTION AND DELIVERY HOSE
OS10 OIL SUCTION AND DELIVERY HOSE RECOMMENDED FOR OIL, HYDRAULIC AND PETROLEUM BASED FLUID, SUCTION AND DELIVERY WITH UP TO 55% AROMATIC CONTENT. Tube : Black, smooth conductive NBR compound. Reinforcement
More informationPRODUCT CATALOGUE FLEXIBLE DUCTING
PROUCT CATALOGUE FLEXIBLE UCTING Serpent underground ventilation system Version 1.3 CONTENTS INTROUCTION UCTING 4 SYSTEM PARTS 5 SYSTEM INSTALLATION 6 PROUCTS TITAN / ZIP Straight uct 8 uct Adapter 9 uct
More informationSINGLE DUCT TERMINAL UNITS
www.igcaire.com SINGLE DUCT TERMINAL UNITS Direct Digital Control, Pressure Independent FEATURES 22 Gauge Galvanized Steel Casing Construction with a 20 Gauge Casing Option that Provides Strength and Product
More informationDUCTING: U-01 MATERIAL HANDLING ANTI STATIC CUSTOM MADE DUST FUMES
MATERIAL HANDLING CUSTOM MADE ANTI STATIC FUMES DUST 228 230... PVC CLEAR PVC BLUE 231... TPR FRS FLEXAUST HT 232... VOLCANO PU-R VOLCANO PU-M VOLCANO PU-H 233... EOLO PU EOLO PU A/S 234... EOLO TR TUFLEX
More informationInstallation Guide U-Track
Installation Guide U-Track Thank you for selecting a DuctSox System. This guide will be helpful for the installation of a U-Track System. Sections of fabric will be labeled, assembled, bagged, and boxed
More informationHOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)
HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.
More informationVANEAXIAL & TUBEAXIAL FANS
BULLETIN 482 July 2008 VANEAXIAL & TUBEAXIAL FANS Type "S" Belt Driven Featuring Welded Steel Propellers Models VSBD & TSBD Model TSBD Belt Driven Tubeaxial Type "S" Vaneaxial & Tubeaxial Fans For applications
More informationAXIFAN VANEAXIAL FANS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS AXIFAN VANEAXIAL FANS MODEL TCVA CATALOG AX100 JUNE 2013 VANEAXIAL FANS Model TCVA The heart of the TCVA AXIFAN fan lies in its wheel.
More informationFounded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers
More informationTwin City Fan & Blower
Twin City Fan & Blower BULLETIN AX100-A October 2008 AXIFAN VANEAXIAL FANS TYPE TCVA TCVA Vaneaxial Fans The heart of the TCVA AXIFAN fan lies in its wheel. Cast of high strength aluminum alloy, the one-piece
More informationDefining Innovation. turbo pressure blowers. Twin City Catalog 1200
Defining Innovation. turbo pressure blowers MODEL TBA TBR 1 Twin City Catalog CATALOG -A May 11 Model TBA/TBR Turbo Pressure Blowers Model TBA and TBR fans from Twin City Fan & Blower are constant pressure,
More informationLightweight protection with safety at the forefront
Lightweight protection with safety at the forefront As you know, protecting your employees can be expensive. How can you ensure your workers are safe without significant additional expense to the company?
More informationTECHNICAL BULLETIN PRODUCT INQUIRY
TECHNICAL BULLETIN PRODUCT INQUIRY Air-Tight Butterfly Valves GENERAL NuAire air-tight Butterfly Valves are available in a wide variety of sizes and configurations to direct and control airflow in heating,
More informationC2-2. Table of Contents DUAL DUCT TERMINAL UNITS
C2 UA UCT TERINA UNITS Table of Contents UA UCT TERINA UNITS This unit features a compact design for variable volume applications where blending of hot and cold air is not required. T This unit features
More informationTURBO PRESSURE BLOWERS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS TURBO PRESSURE BLOWERS TBA TBR CATALOG 10 APRIL 13 TURBO PRESSURE BLOWERS Models TBA TBR TBR Arrangement 8 Model TBA and TBR fans from
More informationTRELLEBORG ENGINEERED PRODUCTS. Electrical Safety Products
Electrical Safety Products Highest standard of protection. A safe working environment is important in all industries, but in the electrical generation and supply industry, it is paramount. Trelleborg specifically
More informationVOLU-probe/SS. Stainless Steel Pitot Airflow Traverse Probes
Stainless Steel Pitot Airflow Traverse Probes The VOLU-probe/SS Stainless Steel Pitot Airflow Traverse Probe is ideally suited for new installations or retrofit applications requiring accurate airflow
More informationC5 SLP Blackwing Induction System
PART #21110 E/L 21114 E/L 1997-2004 C5 SLP Blackwing Induction System PACKING LIST Before installation, use this check list to make sure all necessary parts have been included. 21110E 1. 1 200326002 Filter,
More informationNon Return Damper, Type RK-E20
Non Return Damper, Type RK-E20 Page 1/9 Page 2/9 Non Return Damper, Type RK-E20 Self acting non return dampers will close at reverse airflows in HVAC systems and will lock ducts or air handling units automatically.
More informationPneumatic Products st»
» Pneumatic Products » Industry Standouts for Over 50 Years The benefits of an innovative, pneumatic coupling design were solid enough to single-handedly launch CEJN in 1955. This reliable, easy-to-handle
More informationSINGLE DUCT TERMINAL UNITS 30X/HQX SERIES
30X/HQX SERIES 30X SERIES EXHUST 30HQX SERIES EXHUST HOSPITL GRDE QUIET TYPE WITH DISSIPTIVE SILENCER PRODUCT OVERVIEW Nailor Single Duct Exhaust Terminal Units are used to modulate exhaust flow from an
More informationHOSE - OIL/CHEMICAL & GENERAL PURPOSE
HOSE - OIL/CHEMICAL & ENERAL PURPOSE A430 - Oil Suction and Delivery Hose 10 bar Rubber: Lining: Reinforcement: Cover: Temperature range: - DB15 Designed for suction and discharge use on various petroleum
More informationManufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations;
Corporate Headquarters SHEET METL CONNECTORS, INC. 5850 MIN STREET N.E. MINNEPOLIS, MINNESOT 55432 Toll Free: 800-328-1966 Local: 763-572-0000 Fax: 763-572-1100 www.smcduct.com Manufacturing Facilities
More informationBULLETIN 456. July 1997 VANEAXIAL FANS. Type W Direct Drive/Belt Driven. Model VW Direct Drive. Model VWBD Belt Driven
BULLETIN 456 July 1997 VANEAXIAL FANS Type W Direct Drive/Belt Driven Model VW Direct Drive Model VWBD Belt Driven Aerovent certifies that the Type W Vaneaxial Fans shown herein are licensed to bear the
More informationGood, Better, & Best Duct Design. An Overview for ASHRAE Bi State Chapter March 14, 2012
Good, Better, & Best Duct Design An Overview for ASHRAE Bi State Chapter March 14, 2012 Introduction Why Duct Design? How to Design? Design Process (8 steps) Fundamentals Design Methods Introduction Ductwork
More informationBlower Specifications
Lab These charts are arranged by increasing CFM. All lab blowers are 0Hz. See the preceding Four Steps To Blower Selection. 0 to CFM to / inch Static Pressure SIZE CODES -000/00 / () 0-00 / /0-0 () 0-000
More informationUniversity of Delaware
SECTION 23 36 00 _ SUMMARY PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Constant/Variable volume supply terminal units. 2. Fan powered terminal units. 3. Exhaust valves B. Related Sections: Section
More informationTube Axial Inline Fans
Tube Axial Inline Fans Models TDI & TBI-CA Level 3 with Cast Aluminum Propeller Direct & Belt Drive Clean Air or Fume Exhaust July 2011 Features Tube Axial Inline Fans Greenheck s tube axial fans are the
More informationAL-Maraj Central A/C Systems Accessories Mfg Co.
AL-Maraj is one of the renowned Manufacturer, Stockist and Supplier of all kinds of HVAC products, Ducting accessories, Pipe support system, Electro-mechanical and A/C Accessories in U.A.E since 2000.
More informationHORD HOSPITAL OPERATING ROOM AIR CURTAIN
HORD HOSPITAL OPERATING ROOM AIR CURTAIN The Hospital Operating Room Diffuser (HORD) air curtain system is engineered specifically for the demanding needs of operating room environments. The HORD air curtain
More informationDUST, FUME, TRIM & WASTE REMOVAL
METFLO DUCT COMPONENTS DUST, FUME, TRIM & WASTE REMOVAL H-P Products, Inc. 800.860.TUBE (8823) Fax: 330.875.7155 www.metflo.com 1 Services INDEX SERVICES.... 2 SPECIAL PARTS.... 3 ROLLED LIP DUCT Straight
More informationFan s venturi opening uses innovative curvature design for efficient air performance.
G R A I N C O N D I T I O N I N G E Q U I P M E N T G U A R D I A N S E R I E S : A C O Axial Fans High-Spe Fan s venturi opening uses innovative curvature design for efficient air performance. 10-mil
More informationFAN POWERED SERIES FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT SPECIFIABLE FEATURES
FAN TERMINAL UNIT SPECIFIABLE FEATURES Galvanized steel casing, mechanically sealed for low leakage construction NEMA TYPE 1 rated hinged control enclosure with standoff to prevent penetration of casing
More information2.6. Air Flow Control Valve Type PRD
2.6. Air Flow Control Valve Type PRD Page 1/10 Air Flow Control Valve, Type PRD Page 2/10 Air Flow Control Valve Type PRD Description and Design The PRD remains the air valve of choice for critical heating,
More informationSealing Technologies & Solutions
Sealing Technologies & Solutions Save weight, space, time and money! High Integrity Sealing Vector Techlok Clamp Connector A radially-bolted mechanical pipe connection which allows quick make-up and break-out
More informationCentrifugal Cabinet Fans Model BDF. Belt Drive Duct Fan
Centrifugal Cabinet s BDF Belt Drive Duct July 007 BDF Belt Drive Duct s Greenheck s Belt Drive Duct s, BDF, provide the industry s best performance and durability. BDF is carefully engineered for efficiency
More informationQUALITY GOLDENISO EXCELLENCE ISOBARIC HOSE RANGE PARTNERSHIP INTELLIGENT DESIGN INTEGRATED SOLUTIONS
GOLDENISO ISOBARIC HOSE RANGE QUALITY INTEGRATED SOLUTIONS INTELLIGENT DESIGN EXCELLENCE PARTNERSHIP Why Manuli? Manuli Hydraulics is focused on achieving excellence in the design, manufacture and supply
More informationMÜPRO. One-piece pipe clamps. Sprinkler pipe clamps. Refrigerant pipe clamps. Two-piece pipe clamps. Heavy-duty pipe support/din pipe clamps
0. MÜPRO 1. Vibration control 2. Fire protection 3. Pipe clamps 4. Support channels 5. Accessories 6. Anchor points/expansion points 7. Heavy-duty pipe support 8. MPT-Support system 9. Ventilation 10.
More informationWater Suction Hose. Temperature Range: -32 C to +82 C (-25 F to +180 F)
Industrial Hose : Page: Flow MAXX Water Suction 1 EDPM Water Suction 1 PVC Water Suction & Discharge Heavy Duty 2 PVC Water Suction & Discharge Standard Duty 2 Tigerflex Type J PVC Hose 3 Tigerflex Type
More informationTURNING AIR INTO SOLUTIONS. LOW PROFILE HOODED PROPELLER ROOF VENTILATORS. LHD/LHB (Exhaust/Supply) LHDF/LHBF (Filtered Supply)
TURNING AIR INTO SOLUTIONS. LOW PROFILE HOODED ROOF VENTILATORS LHD/LHB (Exhaust/Supply) LHDF/LHBF (Filtered Supply) CATALOG 4860 April 17 ROOF VENTILATORS Overview Propeller Roof Ventilators LHB with
More informationInstallation Instructions
Installation Instructions TrailView Soft Top Important Safety Information For proper installation and best possible fit, please read all instructions BEFORE you begin. Periodically check all components
More informationVANEAXIAL FANS. DUCT FANS Capacities to 60,000 CFM Static pressures to 2 WG. TUBEAXIAL FANS Capacities to 86,000 CFM Static pressures to 3 WG
BULLETIN 671 AUGUST, 2016 VANEAXIAL FANS DUCT FANS Capacities to 60,000 Static pressures to 2 WG TUBEAXIAL FANS Capacities to 86,000 Static pressures to 3 WG Capacities to 0,000 Static pressures to 5 WG
More informationDuct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ
Duct mounted fans axial flow Pacific HVAC Engineering 215 www.pacifichvac.com Tel. Australia 13 733 833 NZ 8 1 326 6 5 4 3 2 1 5 1 15 2 7 6 5 4 3 2 1 3 2.5 2 1.5 1.5 1 15.5 1 1.5 2 2.5 3 3.5 Volume m 3
More informationUNLEASH THE POWER REAL-WORLD SOLUTIONS
FLUID POWER UNLEASH THE POWER The fluid power industry is not only solidifying a hold on current applications, it is unleashing its knowledge into everincreasing frontiers. Excessive temperature and diverse
More informationFlexible Hose Ducting Accessories
Flexible Hose Ducting Accessories Dependable. Anywhere. QUALITY HOSES FOR OVER 70 YEARS Flexaust has manufactured durable, long lasting, flexible hose and ducting solutions for industrial and commercial
More informationInstallation Instructions I - Sheet Number I-TVR-01 Rev. A
Installation Instructions I - Sheet Number I-TVR-01 Rev. A TrailView Soft Top For proper installation and best possible fit, please read all instructions BEFORE you begin. For technical assistance or to
More informationsales@plascorp.com.au www.plascorp.com.au Plascorp Pty Ltd is one of Australia s leading privately owned Manufacturing and Distribution Companies. Our product range comprises PlasticoatTM Industrial ducting,
More informationCompleting Your Fume Removal System
Once a laboratory hood has been selected, the next step is to select the proper blower and ductwork. It is important that these be sized correctly depending on hood size, application, CFM, and distance
More informationAdd face and hearing protection to any hard hat with ELVEX QuickSnap System in just four easy steps!
Add face and hearing protection to any hard hat with ELVE QuickSnap System in just four easy steps! 1. Hard Hat Select your current hard hat from adjacent chart. YOUR HARD HAT HERE a. QuickSnap TM Slot
More informationIntroduction to Johnson Controls Dampers
Damper and Actuator Product Guide 268.1 Damper Engineering Section Product Bulletin Issue Date 1297 Introduction to Johnson Controls Dampers For over 100 years, Johnson Controls has been the industry leader
More informationLeading the way for clean air in the new millennium. S o u r c e C a p t u r e
Leading the way for clean air in the new millennium. S o u r c e C a p t u r e Market Driven Product Solutions Driven by technological innovations and responsive customer service, Airflow Systems, Inc.
More informationMODELS FF & FFC CEILING AND INLINE/CABINET VENTILATORS
Model FF Model FFC MODEL FF FEATURES Exhaust air up to 1500 CFM Forward curve centrifugal wheel for high static pressure capabilities to 1 w.g. Resilient mount, low RPM motor for quiet operation Speed
More informationHORD HOSPITAL OPERATING ROOM AIR CURTAIN
HORD HOSPITAL OPERATING ROOM AIR CURTAIN The Hospital Operating Room Diffuser (HORD) air curtain system is engineered specifically for the demanding needs of operating room environments. The HORD air curtain
More informationVELAN TRUNNION-MOUNTED
VELAN TRUNNION-MOUNTED Velan s standard trunnion-mounted ball valves offer increased value by incorporating advanced design features. TRUNNION-MOUNTED BALL The ball is fixed and the seat rings are floating,
More informationWATER WATER DISCHARGE. MULTIPURPOSE General Purpose Heavy Duty Push-on CHEMICAL TRANSFER. CLEANING EqUIPMENT. Transfer Washdown MARINE
DISCHARGE Air & Temp Coupled Lay-flat Page Rubber Thermoplastic MSHA Range Lengths Construction Brigade Mine 137 Yes Yes -10 F to 150 F Yes Fire Engine Booster 223 Yes 0 F to 180 F Yes Pathfinder Garden
More informationSINGLE DUCT AIR TERMINAL UNITS
AIR terminal units AIR TERMINAL UNITS MODEL NUMBER LEGEND XXXXX XXX -XXXX Model TH TL THECO Inlet Size (04, 05, 06, etc.) Generation 5, 6, 7 The METALAIRE single duct terminal units are at the core of
More informationIssue 4 (Record Only) Job #: Innovent Submittal Date: October 30, 2012 Project: Location: Columbus, OH Innovent Job #: Submittal Issue: 4 (Record Only) Engineer: Contractor: Tag Innovent Model # AHU-BG-01
More informationMODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS
MODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS APPLICATION The extremely quiet FF and FFC ventilators are used to exhaust air from a variety of commercial and institutional applications, such as restrooms,
More informationOverfill Prevention Valve
Overfill Prevention Valve The Guardian A1100 Materials Description Body: Aluminum Floats: HDPE Seals: Viton Specifications Weight: 4.3 lbs. Diameter: 3.76 Length: 18.0 Approvals CARB ULC City of New York
More informationThe Industrial Choice. Model BSHD Direct Drive LOW PROFILE HOODED PROPELLER ROOF VENTILATORS. Models BSHD / BSHB
The Industrial Choice. Model BSHD Direct Drive LOW PROFILE HOODED ROOF VENTILATORS Models BSHD / BSHB CATALOG 632 November 12 Hooded Roof Ventilators Models BSHD BSHB Aerovent Low Profile Hooded Roof Ventilators
More informationJ-FLEX HYDRAULIC HOSE SOLUTIONS
Your Hose & Fitting Connection J-FLEX HYDRAULIC HOSE SOLUTIONS ww.jgbhose.com JGB Headquarters 115 Metropolitan Dr. Liverpool, NY 13088 (315) 451-2770 Buffalo Branch 2540 Walden Ave. Cheektowaga, NY 14225
More informationFor installation into ductwork
X X testregistrierung Non-return dampers Type For installation into ductwork Non-return dampers prevent unwanted airflows against the intended airflow direction when the system is not in operation Maximum
More informationFiberGuide Fibre Management Systems
FiberGuide Fibre Management Systems Table of Contents Introduction...................................................................... 1 Features and Benefits..............................................................
More informationFIXED PITCH PROPELLER FANS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS FIXED PITCH PROPELLER FANS MODEL TCWP CATALOG AX500 DECEMBER 2012 PROPELLER FANS Model TCWP Fixed Pitch Heavy-Duty Construction Twin
More informationInstallation Instructions
Installation Instructions Speedcook Oven Read carefully. Keep these Instructions. INSTALLATION INSTRUCTIONS Electrical Requirements Product rating is 240/208 volts AC, 60 Hertz, 30 amps and 6.5 kilowatts.
More informationRound Slings. SpanSets Supra Plus Magnum Plus Magnum Force Stage Slings 24-25
6 02.1 Round Slings 8-11 12-15 16-19 20-23 24-25 7 The Original SpanSet, Now a Generic Term for Round Slings Variable load bearing point for more even wear Ideal for choke lifting cylindrical objects Lifts
More informationMANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING
MANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING CARE & SAFETY INSTRUCTIONS 114 CX & M3 SERIES CHAIN BLOCKS 115-117 C SERIES CHAIN BLOCKS 118 MINI II CHAIN BLOCKS 118 LX & L5 SERIES CHAIN BLOCKS
More informationGeneral TAHVIEH HAMOON Airfoil Centrifugal Fans Utilize the latest design techniques to product a quiet highly efficient air mover.
General TAHVIEH HAMOON Airfoil Centrifugal Fans Utilize the latest design techniques to product a quiet highly efficient air mover. Aerodynamically designed blades and air passages allow more air to be
More informationSECTION AXIAL HVAC FANS
SECTION 233413 - AXIAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationCentrifugal Cabinet Fans Model BCF. Belt Drive Low-Profile
Centrifugal Cabinet s BCF Belt Drive Low-Profile November 204 BCF Centrifugal Cabinet Contents Standard Construction Features... 3 Options and Accessories... 4 Filter and Mixing Box Data... 5 Typical Installations...
More informationUniflex is the first in India to manufacture hose assemblies using pallet swage fittings.
Universal Flexibles Pvt. Ltd. is involved in the manufacture of top of the line quality Hydraulic Assemblies having commenced operations at Bangalore in 1987. Tradition of excellence Uniflex is the first
More informationConveyor Solutions. Trellex FLEXOPIPE
EN Trellex FLEXOPIPE 2 Trellex FLEXOPIPE flexible, unique, ecological! Conveyor belt systems of enclosed material transport are an excellent solution to various conveying problems. Metso is Europe s leading
More informationeasy duct - an investement in your future
easy duct easy duct - an investement in your future LOWER COST THAN CONVENTIONAL JOINING METHODS Easy Duct clamp-together ducting eliminates rivets, screws, welds and other time-consuming and costly joining
More informationNONHAZARDOUS LOCATION AIR VENTILATION BLOWERS
Help conform to confined work space regulations with General's air ventilation blowers. NONHAZARDOUS LOCATION AIR VENTILATION BLOWERS General s line of portable air blowers can accommodate most nonhazardous
More informationDesign Stress = 8 Mpa
hdpe Pipes HdPE Pipes Muna Noor Manufacturing & Trading LLC is a pioneer in the manufacture of plastic pipe systems in Oman. Today s modern polyethylene resins are highly engineered for rigorous applications
More informationSeries Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features
Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications
More informationMODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS
R MODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS APPLICATION The extremely quiet FF and FFC ventilators are used to exhaust air from a variety of commercial and institutional applications, such as
More informationH /J /K Series Standard Duty PVC Suction Hose
H /J /K Series Duty PVC Suction Hose Agricultural liquid fertilizer Air seeder lines Drain lines Irrigation lines Mining applications (MSHA) Rock dusting Water suction standard duty Construction: PVC tube
More informationINDUSTRIAL HOSES 1
INDUSTRIAL HOSES 1 WATER HOSES LONG-SU 6 BAR Gardening and general water discharge services. Temperature range: -25 C / +70 C. Tube: NBR/SBR / Natural and synthetic rubber. Cover: SBR, weather and abrasion
More informationMODELS FF & FFC CEILING AND INLINE/CABINET VENTILATORS
Model FF Model FFC Model ff Features Exhaust air up to 1500 CFM Forward curve centrifugal wheel for high static pressure capabilities to 1 w.g. Resilient mount, low RPM motor for quiet operation (except
More informationOrlando Supertop Supertop UHMWPE Real Everest Supertop LL Supertop LL UHMWPE Providence. Acid and chemical hose. Chem
Chem Orlando Supertop Supertop UHMWPE Real Everest Supertop LL Supertop LL UHMWPE Providence Acid and chemical hose Chem 236 Chem Orlando EPR :,,,. Ӏ,. IVG., 50 (+122 F),, IVG. : -40 (-40 F) +100 (+212
More informationHigh Performance Axial Fans
High Performance Axial Fans Model AX High Efficiencies Low Sound July 2014 High Performance Axial Fans Greenheck s High Performance Axials, Model AX, are direct driven axials designed for inline air ventilation
More informationB. Base occupied space sound level estimates on ARI 885. C. Terminal heating coils shall conform to ARI 410.
PART 1 - GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationCRITICAL ENVIRONMENT DIFFUSERS
READ COMPLETELY AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE CRITICAL ENVIRONMENT DIFFUSERS SSLF, SSLFHFD, FRD, FRD-HEPA, HRDP, HRDP- HEPA, SSHEMI, SSHEMI-HEPA INSTALLATION AND SERVICE MANUAL THESE
More informationB Style Electric Motors and Valves
Style Electric Motors and Valves Shutoff/ontrol Motors oom ontrol motors are 22 RPM for 344 series (0.7 second shutoff valves) and 25 RPM for 346 and 356 series (0.6 second shutoff valves) for 12 VD systems.
More informationVAV Terminal Units SDS
VAV Terminal Units SDS VAV Terminal Units SDS STEKON SDS; controls the volume of conditioned air into an occupied space in response to a thermostat or Building Management System control signal with minimal
More informationCentrifugal Cabinet Fans Model BCF Belt Drive Low-Profile
Centrifugal Cabinet s BCF Belt Drive Low-Profile May 2007 BCF Belt Drive Cabinet s Greenheck belt drive low-profile cabinet fans, BCF, are designed for efficiency and reliability in supply, exhaust or
More informationProduct Data. Features/Benefits. WEATHERMASTER 36S Water Control Induction Air Terminals to cfm (1770 to 8900 Btuh)
Product Data WEATHERMASTER 36S Water Control Induction Air Terminals 19.4 to 131.9 cfm (1770 to 8900 Btuh) Induction air terminals offer: Heating and cooling operation 2-pipe or 4-pipe system options Automatic
More informationEASY DUCT - AN INVESTMENT IN YOUR FUTURE
EASY DUCT EASY DUCT - AN INVESTMENT IN YOUR FUTURE LOWER COST THAN CONVENTIONAL JOINING METHODS Easy Duct clamp-together ducting eliminates rivets, screws, welds and other time-consuming and costly joining
More informationHIGH QUALITY AND RELIABLE HOSE AND FITTING PROTECTION
HIGH QUALITY AND RELIABLE HOSE AND FITTING PROTECTION Essential parts to safeguard the production, testing, storage and transportation of fluid handling components and equipment. CAPS AND PLUGS protect
More informationSECTION AIR TERMINAL UNITS
SECTION 23 36 00 AIR TERMINAL UNITS PART 1 - GENERAL 1.1 SUMMARY A. Section includes constant volume terminal units, variable volume terminal units, dual duct terminal units, fan powered terminal units,
More informationDC Duct & Sheet Metal LLC Office: 2520 Pennsylvania Avenue, SE Washington, DC 20020
SHEET METAL WORKERS LOCAL 100 Office: 2520 Pennsylvania Avenue, SE Washington, DC 20020 Shop: 3711 Wells Avenue Mount Rainier, MD 20712 Spiral Duct Material Options Our products are fabricated from a variety
More informationCyclone Custom Centrifugal Fans
Cyclone Custom Centrifugal Fans A L P H A I R Custom Engineered Centrifugal Fans ALPHAIR s line of custom engineered centrifugal fans is ideally suited for applications that involve moving air at higher
More informationTwin City Fan & Blower
BULLETIN 600 Twin City Fan & Blower September 2009 VENTILATING SETS TYPE BCV (Backward Inclined) TYPE BCVU5 (UL 705 Listed) TYPE BCVU2 (UL 762 Listed) TYPE BCVSH (UL Smoke & Heat) TYPE BAV (Airfoil) TYPE
More informationCONTROL DAMPERS. Models 1810 & Model Model Model 1370
CONTROL DAMPERS CONTROL DAMPERS MODELS 1810 & 1820 MANUAL ALANCING DAMPERS STEEL Models 1810 and 1820 have been engineering and designed for manual balancing applications in low to medium pressure and
More informationtable of contents PRODUCT SUMMARY 2
P R O D U C T C A T A L O G introduction Aire Technologies, Inc. is proud to present our line of air management and life safety products for integration into your HVAC system design, fabrication, or installation.
More information