TECHNICAL DATASHEET KROMBACH Soft Seated Ball Valves According to ASME Standard Type KH

Transcription

1 rands you trust. TECHNICAL DATASHEET KROMBACH Soft Seated Ball Valves According to ASME Standard Type KH 10-10

2 Class 10 & 00 With Hand Lever Dimensions and Weights Soft-Seated Ball Valves According to ASME Standards Ball valves as per ASME B1., split ody design, with full-port, maintenance-free, gland packing and hand lever with locking possiility or with side-mounted operating gear and hand wheel. Features include: face-to-face dimension ASME B1.10 design full ore fire-safe-design anti-static conductance stem low-off proof, mounting flange for actuators according to DIN ISO 11 standard design maintenance-free stem sealing flanged ASME B1. RF TA-Luft design Option availale with locking pin. Standard hand lever with locking device. Scope of Supply Class 10 with Hand Lever - Dimensions and Weights Order No. Class Face-to-face dimension Body Material KH ASME B1.10 Tale 11-Column 18 Stainless steel casting A1 Grade CF8M KH ASME B1.10 Tale 1-Column Stainless steel casting A1 Grade CF8M KH ASME B1.10 Tale 11-Column 18 Steel casting A1 Grade WCB KH ASME B1.10 Tale 1-Column Steel casting A1 Grade WCB Build Measurement Flange Connection Ball Stem DIN ISO 11 Extension Measurement L1 L D k n x d g d1 d F Thread UNC h h1 h h L ls. ½" x F0 1/ ¾" x F0 1/ " x F0 1/ ½" x F0 / " x F0 / " x F10 / " x19 1. F10 / " x F1 / Class 00 with Hand Lever - Dimensions and Weights Build Measurement Flange Connection Ball Stem DIN ISO 11 Extension Measurement L1 L D k n x d g d1 d F Thread UNC h h1 h h L ls. ½" x F0 1/ ¾" x F0 1/ " x F0 1/ ½" x F0 / " x F0 / " x F10 / " x. 1. F10 / " x F1 / Wt Wt

3 Standard Design Materials of Construction KH 10/B-C ½" - " KH 10/B-C ½" - " KH 10/A-C " KH 10/A-C " 1 L h h h1 ød h 1 1 ød1 (DN) øg øk n x ød ød L Materials of Construction L1 Item Designation KH 10 KH 10 Material Materal 1 Body CF8M WCB Flange Part CF8M WCB Ball 1 Ti / CF8M Stem F1 Body Sealing PTFE Seat TFM Stem Sealing PTFE 8 Sealing PTFE / TFM 0 Conductive 9 Pressure Ring 1 Ti 10 Guide Bush PTFE, PTFE / GFK 11 Sliding Ring PTFE / Coal 1 Cup Spring 01 1 Locking Plate 1 1 Stem Nut A-0 / 1 1 Stud Bolt with Nut A19 Grade B8M CL / A19 Grade 8M 1 Hand Lever 1Ti / CF8M 1 Stop Screw B8M / A-0 18 Hand Lever Nut 1 Ti 19 Flange 1Ti / Cheese-Head Screw B8M / A-0 1 Guide Sleeve IGLIDUR 1

4 Class 10 & 00 With Gear Dimensions and Weights KH 10/A-C " - 8" KH 10/A-C " - 8" L Distance to pipe axis L h1 ød 1 10 h h 8 ød h h1 h ød ød1 øg øk (n x ød) ød ød1 øg øk (n x ød) ød L L1 " With Gear - Dimensions and Weights 1 Build Class Measurement Wt DIN ISO 11 Gearox L1 L L D k n x d g h h1 h D ls. F Thread UNC Pro-Gear 10 " x F1 /8-11 Q-100S/F1 00 " x F1 /8-11 Q-100S/F1 10 8" x F1 /8-11 Q-000S/F1 00 8" x F1 /8-11 Q-000S/F " x F1 /8-11 Q-000S/F " x F1 /-10 Q-000S/F1 10 1" x F1 /-10 Q-000S/F1 00 1" x F /8-11 Q-00S/F Possile Key Fitting Positions (Standard Option) L e safe L1 1 8" CRANE Open Open Closed Closed

5 Trunion Mounted Design Materials of Construction KH 10 10" - 1" KH 10 10" - 1" L ød h h1 h ød ød1 øg øk (n x d) ød Materials of Construction Item Designation KH 10 Material L L1 KH 10 Material Item Designation Material 1 Body CF8M WCB 1 Guide Sleeve IGLIDUR Flange Part CF8M WCB Pin 1Ti / 1.1 Ball 1 Ti / CF8M Slip Ring PTFE / GFK Stem F1 Sealing PTFE Body Sealing PTFE Stud Bolt with Nut A19 Gr. B8M CL / A19 Gr. 8M Seat TFM Cover 1Ti / 1.1 Stem Sealing PTFE Pressure Spring 1.10 / 01 8 Sealing PTFE / TFM 0 Conductive 8 Retaining Ring 1Ti / Pressure Ring 1 Ti 9 O-Ring Viton 10 Guide Bush PTFE, PTFE / GFK 0 Fitting Key 1Ti / Sliding Ring PTFE / Coal 1 O-Ring Viton 1 Cup Spring 10 galv. O-Ring Viton 1 Stem Nut A-0 / 1 Stuffing Box 1Ti / Stud Bolt with Nut A19 Gr. B8M CL / A19 Gr. 8M Stuffing Box-Ring PTFE 19 Flange 1Ti / 1.1 Fitting Key Stainless Steel 0 Cheese-Head Screw B8M / A-0 Viton is a registered trademark of DuPont Performance Elastomers L.L.C. e safe CRANE

6 Top Flange Dimensions Figure 1.0 Figure 1. Figure Figure 1.1 Figure 1. Figure Figure Figure Figure Top Flange Dimensions ½". ¾" 1" 1½" " " " " " 8" 8" 10" 10" 1" 1" Class 10/00 10/00 10/ Figure 1.0 and and and 1. DIN ISO 11 F0 F0 F10 F1 F1 F1 F1 F1 F1 F1 F d d nxm (UNC) x1/-0 x/1-18 x/8-1 x/8-11 x/8-11 x/8-11 x/8-11 x/8-11 x/-10 x/-10 8x/8-11 d SW M1 M1x1. M18x1. Mx M9x M9x h h h h h t Stem ends with Doule D Doule D Doule D Doule D Doule D Parallel Key 1 Parallel Key Parallel Key Parallel Key Parallel Key Parallel Key

7 Pressure / Temperature Range and Torque Values Maximum allowale pressure (PSI) on seats of TFM at listed temperatures. 0 Class 10 - Pressure Rating According to ASME B1., Tale -.A / A1 Grade CF8M Body Temperature 0 Class 10 - Pressure Rating According to ASME B1., Tale -1.1A / A1 Grade WCB Body Temperature Differential Pressure (PSI) Differential Pressure (PSI) Temperature F Temperature F 800 Class 00 - Pressure Rating According to ASME B1., Tale -.A / A1 Grade CF8M Body Temperature 800 Class 00 - Pressure Rating According to ASME B1., Tale -1.1A / A1 Grade WCB Body Temperature Differential Pressure (PSI) Differential Pressure (PSI) Temperature F Temperature F ½" - 1" 1½" - " " - " " - 8" 10" - 1" Torque Values DN P Up To: P Up To: P Up To: Max. Allowale 10 Bar 1 PSI Bar PSI 0 Bar 1 PSI Stem Torque mm inches Nm ft l(f) Nm ft l(f) Nm ft l(f) Nm ft l(f) 1 ½" ¾" " ½" " " " " " " " " These standard torque values are valid for luricating fluids (i.e water, oil at F) IMPORTANT! If Non-Lurication medias (i.e. Gases, Benzine) or adhesive medias are used, increasing torque values have to e considered.

8 CRANE Flow Solutions Friedrich Kromach GmH Armaturenwerke Marurger Straße Kreuztal, Germany D- Tel.: +9 (0) /0-00 Fax.: +9 (0) /0- CRANE Energy Gloal Headquarters Research Forest Drive, Suite 00 The Woodlands, Texas 81 U.S.A. Tel.: (1) Fax.: (1) CRANE ChemPharma Gloal Headquarters Cooper Road Cincinnati, Ohio Tel.: Fax.: CRANE Energy Flow Solutions manufactures and sells highly engineered valves focused on the Energy sector including Power Generation, Petroleum Refining, Oil & Gas Production & Transport, and Commercial Construction. Its trusted rands include: ALOYCO, CENTER LINE, COMPAC-NOZ, CRANE, DUO-CHEK, FLOWSEAL, JENKINS, KROMBACH, NOZ-CHEK, PACIFIC VALVES, STOCKHAM, TRIANGLE, UNI-CHEK, CRANE Valve Services and CRANE Nuclear. CRANE ChemPharma Flow Solutions designs and manufactures a variety of highly engineered products including: sleeved plug valves, lined valves, high performance utterfly valves, ellows sealed gloe valves, aseptic and industrial diaphragm valves, actuation, lined pipe, fittings and hoses, and air operated diaphragm and peristaltic pumps. Crane Co., and its susidiaries cannot accept responsiility for possile errors in catalogues, rochures, other printed materials, and wesite information. Crane Co. reserves the right to alter its products without notice, including products already on order provided that such alteration can e made without changes eing necessary in specifications already agreed. All trademarks in this material are property of the Crane Co. or its susidiaries. FS-KROMBACH-TD-EN-L AF 01 CRANE Co,