TECHNICAL BULLETIN. Argus TM. FK 76 Metal Seated Ball Valve. Experience In Motion FCD ARENTB0011-US-00 A4 8/16
|
|
- Primrose Robbins
- 5 years ago
- Views:
Transcription
1 TECHNICAL BULLETIN Argus TM FK 76 Metal Seated Ball Valve FCD ARENTB0011-US-00 A4 8/16 Experience In Motion
2 Ball Valve FK 76C Designed to meet ASME B16.34 (PED 97/23/EC optional) requirements, the FK76C ball valve represents the highest standards in valve technology. Its super-fine finished trunnion-mounted ball design is just one of many innovative design features. Sizes Sizes DN 6 DN 12 ASME Pressure Classes Class Ends Technical Design Features Design to ASME B16.34 (PED 97/23/EC optional) Materials: ASME Section II; Pressure / Temperature rating: ASME B16.34 / B16.15; Wall thickness ASME B16.34; face to face dimensions: ASME B16.10, flange connection ASME B16.5 Split body, floating ball design, full bore, ends ASME B16.5 Fire-safe according to ISO Bi-directional, metal to metal sealing, ANSI B FCI 70-2 class VI Anti-blow out stem, long life double stem seal system and stem supported in bearings to ensure seals are free form operation loads Stem sealing system according to EN ISO Anti-static design according to DIN EN ISO 17292, chapter RF Materials Description DN 3 in 8 in ASTM Material DN 3 in 8 in Material DIN EN DN 10 in 12 in ASTM Material Body A352LCB LCS Casting DIN EN A216 WCB A351 Gr.CF8M SS DIN EN SS DIN EN Ball A351 CF8M Crabide HVOF SS DIN Crabide HVOF SS DIN Crabide HVOF Stem A182 F51 Duplex DIN EN A182 F51 Stem seals Graphite Graphite Graphite Ball seats ASTM A182 F51 Crabide HVOF Duplex DIN Crabide HVOF Duplex DIN Crabide HVOF Body seals Spiral-wound-gasket A316L/Graphite Spiral-wound-gasket A316L/Graphite Spiral-wound-gasket A316L/Graphite Bolts A193 B7; A193 B8M CL2 A193 B7; A193 B8M CL2 Nuts A194 Gr. 4; A194 Gr. 8M A194 Gr. 4; A194 Gr. 8M 2 Materials note: Crabide HVOF coating to perform ANSI B VCI 70-2 Class VI (high demand)
3 Metal Coatings CRABIDE (ball and ball seats) CRABIDE is a hard metal alloy based on Chromium-Crabide and Nickel/Chromium. Composition Cr2C2/Ni-Cr 75/25 Hardness HV0,3 (>67 HRC) Temperature limit Max. 970 (depending upon base material and process conditions) Thickness µm (usual) Chemical properties Resistance versus media in the range of ph 5 and ph 12, as well under high temperature conditions Mechanical properties High resistance, especially against abrasion adhesive wear and sliding abrasion Note: Additional metal coating systems on request 3
4 Dimensions Schaltwellendichtung STEM-SEALING h h11 d0 56 Kugeldichtungen-metallisch BALL-SEATS METAL SYSTEM l2 FK 76C ASME Class 150, Investment Casting l1 Inch Flange l1 l2 h2 h11 d0 Topwork DIN/ ISO RF , RF , RF RF , ,6 10 RF ,5 446, RF , FK 76C ASME Class 300, Investment Casting Inch Flange l1 l2 h2 h11 d0 Topwork DIN/ ISO RF , RF ,5 237, RF , RF RF , RF ,
5 Pressure / Temperature Rating Class VI low demand chrome/crabide Type DN Class Ends Body Material Code Sectional Assembly Topwork DIN ISO Order Number 76C RF CS 1B4BD2D202 4M1153 4M5102 3Z C RF CS 1B4BD2D202 4M1154 4M5104 3Z C RF CS 1B4BD2D202 4M0985 4M4839 3Z C RF CS 1B4BD2D202 4M0986 4M4841 3Z C RF CS 1B4BD2D202 4M1022 4M4904 3Z C RF CS 1B4BD2D202 4M1023 4M4906 3Z C RF CS 1B4BD2D202 4M1153 4M5103 3Z C RF CS 1B4BD2D202 4M1154 4M5105 3Z C RF CS 1B4BD2D202 4M1153 4M0840 3Z C RF CS 1B4BD2D202 4M1154 4M4842 3Z C RF CS 1B4BD2D202 4M1153 4M4905 3Z C RF CS 1B4BD2D202 4M1154 4M4907 3Z C RF SS 4B4BD2D202 4M1153 4M5102 3Z C RF SS 4B4BD2D202 4M1154 4M5104 3Z C RF SS 4B4BD2D202 4M1153 4M4839 3Z C RF SS 4B4BD2D202 4M1154 4M4841 3Z C RF SS 4B4BD2D202 4M1153 4M4904 3Z C RF SS 4B4BD2D202 4M1154 4M4906 3Z C RF SS 4B4BD2D202 4M1153 4M5103 3Z C RF SS 4B4BD2D202 4M1154 4M5105 3Z C RF SS 4B4BD2D202 4M0985 4M0840 3Z C RF SS 4B4BD2D202 4M0986 4M4842 3Z C RF SS 4B4BD2D202 4M1022 4M4905 3Z C RF SS 4B4BD2D202 4M1023 4M4907 3Z
6 Standard Topwork Drawing FK 76C (Topwork drawing 3Z2128) Standard Topwork Drawing FK 76C (Topwork drawing 3Z2095) 22 ~ 22 ~ 160 ` 0,1 160 ` 0,02 SW36-4kt. KEY SIZE 36 ( SOUARE ) Ă122 Ă47 d9 M12 45 ~ Key Size 36 d ` 0, ` 0,1 Ă120 Ă16 H7 M
7 Standard Topwork Drawing FK 76C (Topwork drawing 3Z2102) 7
8 Torque Tables FK 76C Pressure (bar) DN 80 / Nm DN 100 / Nm DN 150 / Nm DN 200 / Nm DN 250 / Nm DN 300 / Nm , Values torque includes: Metal seated: Chrome / Crabide resp. ARGULOY 40 / Crabide Stem sealing system: ISO15848 Additional Multiplication Factors Application Daily operation 1,0 Operation after longer periods of disuse ( 2 days) 1,1 Operation after longer periods of disuse ( 5 days) 1,2 Media Lubricating 1,0 Non-lubricating 1,3 Example: DN 200 / differential pressure 32 bar / operation every three days / lubricating media Md = 1253 Nm x 1,1 x 1,0 = 1378 Nm 8
9 Europe Flowserve Flow Control GmbH Rudolf-Plank-Straße 2 D Ettlingen, Germany Phone: Fax: USA Flowserve Corporation 3993 W. Sam Houston Parkway North Suite 100 Houston, TX Tel: Flowserve Corporation Beijing office Room 22A1 & A2, HanWei Plaza, No. 7 GuangHua Road, ChaoYang District, Beijing, China Tel: Fax: (FPD) Your contact: All data subject to change without notice Flowserve Corporation. Flowserve and Argus are registered trademarks of Flowserve Corporation. flowserve.com
TECHNICAL BULLETIN. NAF Trunnball DL Ball Valves. Experience in Motion FCD NFENTB A4 09/14
NAF Trunnball DL Ball Valves FCD NFENTB468-00-A4 09/4 TECHNICAL BULLETIN Experience in Motion Primary Characteristics The NAF Trunnball DL is a full-bore trunnion-mounted ball valve, developed by Flowserve
More informationBALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
More informationTECHNICAL BULLETIN. NAF Duball DL Ball Valves. Experience in Motion FCD NFENTB A4 12/14
NAF Duball DL Ball Valves FCD NFENTB467-0-A4 /4 TECHNICAL BULLETIN Experience in Motion Primary Characteristics NAF Duball DL is a full-bore ball valve which is equally suitable for isolation, on/off and
More informationNELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationTECHNICAL BULLETIN. Valtek ShearStream SB Control Valves. Segmented V-port Ball Valves. Experience In Motion VLEETB
TECHNICAL BULLETIN Valtek ShearStream SB Control Valves Segmented V-port Ball Valves VLEETB4152-03 11.02 Experience In Motion Primary characteristics ShearStream SB is a ball sector valve with metal-to-metal
More informationTECHNICAL BULLETIN. Valdisk TX3 Triple Offset Butterfly Control Valve. Experience In Motion FCD VLENTB A4 1/16
TECHNICAL BULLETIN Valdisk TX3 Triple Offset Butterfly Control Valve FCD VLENTB0061-00-A4 1/16 Experience In Motion Contents Triple Offset Butterfly Valve 3 Product Specifications 3 About Triple Offset
More informationNELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationGWC Valve International
GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE QUALITY VALVE PRODUCTS: BALL CAST STEEL FORGED STEEL BUTTERFLY PLUG WAFER CHECK NEEDLE & GAUGE F L O A T I N G B A L L
More informationNELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationTECHNICAL BULLETIN. Audco Ball Valve. Reduced Bore Fire safe Flanged Ball Valves 51/52 Series. Experience In Motion
Audco Ball Valve Reduced Bore Fire safe Flanged Ball Valves 51/52 Series TECHNICAL BULLETIN Experience In Motion With the Series 51/52 designed to BS EN ISO 17292 / API 6D, AUDCO brings to the market a
More informationHSV SERIES 2-PIECE BALL VALVES
HSV SERIES 2-PIECE BALL VALVES Split Body metal seated ball valves for the Pulp and Paper and Power Industry. Design Pressure Rating 150# Available in Sizes 3 to 8 300# Available in Sizes 3 to 8 Valve
More informationEngineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
More informationDM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
More informationTECHNICAL BULLETIN. Segmented V-port Ball Valves. Experience In Motion FCD VLENTB
TECHNICAL BULLETIN Valtek ShearStream SB Control Valves Segmented V-port Ball Valves FCD VLENTB4152-01 07.09 Experience In Motion Primary characteristics ShearStream SB is a ball sector valve with metal-to-metal
More informationbutterfly valves high performance TRIPLE OFFSET HP-TRI REV0
high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only
More informationISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design
TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through
More informationThree Piece Forged Trunnion Mounted Ball Valve
International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320 Houston, Texas 77041 713-983-7600 TM Three Piece Forged Trunnion Mounted Ball Valve 2 through 56 ASME Class 150-1500 Bolted or Welded
More informationFLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 600 VERSION
FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 6 VERSION 1 MBV 27 Issue 12/98 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Liquids. Water. Power plants. Suitable
More informationRef FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:
FIRE SAFE BALL VALVE ISO PN50 ANSI 300 Model/Ref: 768-769 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN50 ANSI300 R.F. Flanges -50 C in
More information2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 756-757 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN20 ANSI150 R.F. Flanges -50 C in SS and -29 C
More informationSize : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled
More informationNELES TRUNNION MOUNTED BALL VALVE SERIES D
NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience
More informationBall Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
More informationTECHNICAL BULLETIN. Valtek Torex TX Control and Shut-off Valves Butterfly Valves. Experience In Motion VLENTB
Valtek Torex TX Control and Shutoff Valves Butterfly Valves VLENTB414302 01.11 TECHNICAL BULLETIN Experience In Motion Primary characteristics Valtek Torex TX, HighPerformance butterfly valve is available
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
More informationFlowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB
Flowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB0400-00 1 TABLE OF CONTENTS PAGE Theory of Operation.. 3 General Ordering Information 4 Torque values ASME Cl. 150. 5 Torque values
More informationTM SERIES Engineered Valves For Pipeline Service Application
Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationBall Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)
3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API
More informationItem 501M. 3-Way Metal Seated Ball Valve. ASME 150/ 300 & 800 psi SIZE: 1/2"-2"
Item M 3-Way Metal Seated Ball Valve ASME / 300 & 800 psi : -" ZIPSON'S M type, 3-way metal seated ball valve is a totally unique valve design for critical working condition of high working temperature
More informationNAF Duball DL Pocket Ball Valves TECHNICAL BULLETIN FCD NFENTB A4 11/17
NAF Duball DL Pocket Ball Valves TECHNICAL BULLETIN FCD NFENTB463-00-A4 /7 NAF Duball DL Pocket Ball Valves FCD NFENTB463-00-A4 /7 Primary characteristics The NAF Duball DL Pocket Valve is the pulp and
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationTRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
More informationControl Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
More informationTECHNICAL BULLETIN. NAF Setball SF Ball Sector Valves. Experience In Motion. flowserve.com. NAF Setball FCD NFENTB A4 02/16
TECHNICAL BULLETIN NAF Setball SF Ball Sector Valves FCD NFENTB4156-00-A4 02/16 Experience In Motion flowserve.com 1 Primary Characteristics The NAF Setball SF from Flowserve is a highly versatile and
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Class 150 (PN20) R.F. Flanges -50 C in SS and -29 C in carbon steel + 230 C Max Pressure : 20 Bars
More informationKeystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationEMISSION-PAK SERIES 7000 AND 9000 BALL VALVES
EMISSION-PAK SERIES 7000 AND 9000 BALL VALVES The Emission-Pak provides a simple and economical method to meet emissions standards. It is supplied as a factory mounted valve assembly. The Emission-Pak
More informationW SERIES 3-PIECE BALL VALVES
W SERIES 3-PIECE BALL VALVES In-Line repairable metal seated ball valves for industrial and process applications. Design Pressure Rating 3000 WOG Available In Sizes ¼ to 3/4 2250 WOG Available In Sizes
More informationTECHNICAL DATASHEET KROMBACH Soft Seated Ball Valves According to ASME Standard Type KH
rands you trust. TECHNICAL DATASHEET KROMBACH Soft Seated Ball Valves According to ASME Standard Type KH 10-10 Class 10 & 00 With Hand Lever Dimensions and Weights Soft-Seated Ball Valves According to
More informationBulletin: Floating Ball Valve. Tartarini Floating Ball Valve. Introduction. Features and Benefits
Tartarini Floating Ball Valve Bulletin: Floating Ball Valve May 2011 Figure 1. Tartarini Floating Ball Valve Introduction Tartarini Floating Ball Valve is a general-purpose valve. It is used for long range
More informationItem 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
More informationKEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire
More informationTECHNICAL BULLETIN. Valtek Multi-Z Anti-Cavitation Control Valve. Experience In Motion. Valtek Series Multi-Z FCD VLENTB /10
TECHNICAL BULLETIN Valtek Multi-Z Anti-Cavitation Control Valve FCD VLENTB1631-00 06/10 Experience In Motion 1 Index Section Features... 2 Specifications... 3 Principal design... 4 Principle of cavitation
More informationTriple Offset Valves
Triple Offset Valves FLOWSEAL MS Value Statement For the harsh conditions of critical process applications, steam isolation, high cycle frequency, and temperature extremes, the Flowseal MS triple-offset
More informationTwo-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationTwo-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
More informationSAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
More informationNELES RE-SERIES V-PORT SEGMENT VALVE
NELES RE-SERIES V-PORT SEGMENT VALVE Metso's Neles RE series V-port segment valve are economical high performance valves in a quarterturn design. They are offered with a variety of trim options from standard
More informationS6/S5-SERIES METAL-SEATED FULL- AND STANDARD-BORE MBV BALL VALVES, 1/2" 12"
S6/S5-SERIES METAL-SEATED FULL- AND STANDARD-BORE MBV BALL VALVES, 1/2" 12" Series MBV S6/S5 metal-seated ball valves meet a wide range of severe-service requirements. These valves are your best choice
More informationSV SERIES. Metal Seated Ball Valves
SV SERIES Metal Seated Ball Valves 1/2 THRU 12 ANSI 150# THRU ANSI 1500# FULL PORT AND REDUCED PORT UNI-DIRECTIONAL AND BI-DIRECTIONAL 316SS OR CARBON STEEL BODY LIVE LOADED STEM PACKING HIGH QUALITY CASTINGS
More informationJAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES
JAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES JT series angle stem tank bottom valves provide a compact assembly with additional space for actuator clearance on insulated vessels. Large port
More informationTECHNICAL DATASHEET XOMOX FK Ball Valves Type K21F - K23F
brands you trust. TECHNICAL DATASHEET XOMOX FK Ball Valves Type K21F - K23F Xomox FK Ball Valves Features and Benefits Soft-Seated Ball Valves According to ASME Standards Xomox FK Valves are designed in
More informationOne and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
More informationSection 25 Project Surplus Packages - Sales Item
Section 25 Project Surplus Packages - Sales Item 25010112 Project Unused Surplus Package. Valves, Pipe and Various Pipe Fittings in Carbon and Stainless Steel. All Certification available. Stored in Bulgaria
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
More informationK-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180
SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationSeries 30,000 Rotary Process Valve. Technical data API 609, DIN 3840.
Series 30,000 Rotary Process Valve The outstanding performance of triple offset, metal seated Vanessa Series 30,000 valve is the ideal solution to achieve perfect shutoff in any process. Features Torque
More informationVALVE WITH UV ELECTRIC ACTUATOR
762-763 VALVE WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 762-763+UV ball valve is dedicated to the automatic opening/shut-off of pipes carrying medium pressure unloaded industrial fluids. This full
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationNAF-Trunnball ball valves
NAF-Trunnball ball valves DN 150-800, Size 6-32 PN 10-40, ANSI Class 150-300 Fk 41.66(1)GB 07.12 Primary characteristics NAF-Trunnball is a trunnion ball valve with full-bore. It is designed to give a
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationNELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS
NELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS Metso's Neles BO series butterfly valve is designed for use in vacuum Pressure Swing Adsorption
More informationMETSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW Neles BW series metal seated high performance butterfly valve with one piece body design, for both control and tight shut-off applications. Multiple
More informationValves and manifolds
Process industry We offer a wide range of accessories for various applications Stopcocks DIN valves Ball valves Bonnet version needle valves are available in various options, materials and connections.
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationSeries FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
More informationNELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
More informationType 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.05-E 462.01-D Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring
More informationType 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.04-E Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring plate
More informationFlanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
More informationInternational Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas
- International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 TM Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc.
More informationCarbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
More informationNAF-Duball ball valves
NAF-Duball ball valves 25-400, Size 1-16 PN 10-40, ANSI Class 150-300 Fk 41.61(22)GB 07.12 Primary characteristics NAF-Duball is a full-bore ball valve which, due to its design and combination of materials,
More informationBUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
More informationKämmer Series Multi-Z FCD KMENTB /16 TECHNICAL BULLETIN. Kämmer Multi-Z Severe Service Valves FCD KMENTB /16. Experience In Motion
TECHNICAL BULLETIN Kämmer Multi-Z Severe Service Valves FCD KMENTB1631-05 02/16 Experience In Motion 1 Index Section Page Features... 2 Specifications... 3 Principal design... 4 Principle of cavitation
More informationType 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
More informationType 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
More informationWAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
More information310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
More informationBolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
More informationFLANGED REDUCED BORE BALL VALVE, SERIES MBV
FLANGED REDUCED BORE BALL VALVE, SERIES MBV 1 MBV 26 Issue 12/98 DESIGN FEATURES Size range 2" 8". ANSI Class 15 and. Pressure classes Tightness Separate ball and shaft assure low pressure tightness even
More informationThe bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
More informationK-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
A comprehensive range of ball valves to suit a wide variety of industrial applications FEAURES he range includes one, two and three piece ball valve designs with screwed, weld or flanged end connections.
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More information3Z Rising Stem Ball Valves
3Z Rising Stem Ball Valves 1 Plant - 3Z Manufacturing & Assembly 254, Sihwa Venture-Ro, Siheung-City, Gyeonggi-Do, Korea 2 Plant - 3Z Foundry 117, Hwanggeum 2-ro, Yangchon-eup Gimpo-city in Gyeonggi-Do,
More informationNAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class
NAF-Setball ball sector valves for MC-pulp DN 80-300, PN 16-40, ANSI Class 150-300 Fk 41.54(2)GB 11.02 Primary characteristics NAF-Setball for MC-pulp is a ball sector valve with metalto-metal seating
More informationØ 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300 Ø P. N h. 4x900=360. n x Øs Ø 5 Ø P Ø R Ø T. n x ØS BALL VALVES ØP ØR ØT
J H Ø T Ø R Ø 5 L2 DN-3 (12 ) to DN-4 (16 Class-1 & 3 DN-1 (6 ) to DN-3 ØI X B Y L Ø P M n x Øs B N h C 4x9=36 J Ø 5 Ø P I n x ØS ØP ØR ØT 1 J B C R3 BALL VALVES L M Ø T Ø R n x Øs I Ø5 5 R1 ØP Ø P L ISO
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
More informationflowserve.com Kämmer SmallFlow Low and Micro Flow Valves
flowserve.com Kämmer SmallFlow Low and Micro Flow Valves 1 Kämmer SmallFlow Valves For Flowserve a low flow valve is a valve with a C v value range between 0.012 and 4.7. Flowserve also manufactures Micro
More informationTwo-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationKämmer Series Low Flow Valves
flowserve.com Kämmer Series 030000 Low Flow Valves Description Kämmer series 030000 low flow valves are designed for precision controlling up to PN40. The body is a precision casting for high finishing
More information21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities
GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3
More informationVALVE WITH UV ACTUATOR
CHARACTERISTICS The 3-way stainless steel 783-5+AP (L-port) and 784-6 +AP (T-port) ball valves are dedicated to the mixing, diverting or automatic discharging of industrial unloaded fluids. The valves
More informationBALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
More information10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction
1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up
More information