Machine Roomless Lifts

Transcription

1 Machine Roomless Lifts Complete Lift Design Solutions From Global Lift Equipment Ltd Global Lift Equipment Ltd H42/H43 Ashmount Enterprise Park, Flint, Flintshire, CH6 5YL. Tel: Fax:

2 INTRODUCTION The OPTIMA-E is the ultimate lift system. The concept removes the need for a machine room either above or adjacent to the lift shaft. The OPTIMA-E is the answer to the increasing demand for compact space saving and environmentally conscious lifts. 1:1 Roping, Rucksack Sling with Geared or Gearless Machine above. Rucksack Design: All loadings are on one wall which allows for 3 car openings Minimum Pit: 1150mm Minimum Headroom: 3550mm Drive has adjustable speed cooling fan to make installation quieter High Quality Material and Reliable Operation Cost Effective Energy Efficient Time Saving and Simple Installation Minimal Maintenance Costs Page 2

3 GENERAL OVERVIEW Capacity: 320 kg - 4 Persons 480 kg - 6 Persons 630 kg - 8 Persons 800 kg - 10 Persons Speed: Drive Unit: Power Supply: 1.0 m/s ACVVF Compact & purpose designed machine located above. 415v, 3 phase, 50hz Control System: Dow n Collective Microprocessor Parameter control and fault finding/diagnostic facility Programming and real-time fault logging Anti-nuisance feature Car preference control Overload indication Pre-loomed (plug- in system) electrical w iring material for w inding machine, car top, Car and landing push buttons and hall lanterns Pow er and car light main sw itch included Control cabinet located to the side of the low est landing entrance Autodialler w ith intercom option Illuminated cabinet Fire recall to main floor Entrances: Car Frame: Fixtures: VVVF car door operator complete w ith set of door panels Complete Landing Entrances - models 40/10 & 50/11 2 hour UK fire rated Landings Aluminium Tracks Full Height Door Detector Fabricated steel structure w ith sw ivelling sliding guide shoes and lubricators Complete w ith shaft top beams and divertor pulleys Pit screen Counterw eight frame and fillers Bi-directional safety device in compliance w ith 95/16/ EC Car top railing in compliance w ith 95/16/EC Full height Venus COP w ith Autodialler & Speech, Emergency Light, Overload Display Gilda Landing Stations Complete w ith EN81-70 Compliant Buttons & Indicators Page 3

4 DATA TABLE Lift Code Payload/ Persons Car Size (WxDxH) Car Entrance Door Type Size (WxD) Shaft (WxD) Shaft Pit Shaft Headroom OPTIMA 320E/1/ x1100x PSO 700x X OPTIMA 320E/2/ x1100x PSO 700x x OPTIMA 320E/1/ x1000x PSO 800x X OPTIMA 320E/2/ x1000x PSO 800x x OPTIMA 480E/1/ x1300x PSO 800x X OPTIMA 480E/2/ x1300x PSO 800x x OPTIMA 630E/1/ x1400x PSO 800x X OPTIMA 630E/2/ x1400x PSO 800x x OPTIMA 800E/1/ x1400x PSO 800x X OPTIMA 800E/2/ x1400x PSO 800x x ALL SHOWN DIMENSIONS ARE IN mm UNLESS STATED OTHERWISE LIFT SPEED 1.0 M/S, GEARED OR GEARLESS, MAXIMUM LIFT TRAVEL 35M LIFT SHAFT DIMENSIONS +25mm -0mm tolerance Page 4

5 LIFT CAR FINISHES The wide selection of wall and floor finishes offered in our cars should meet the demands of Architects, Lift Consultants and Lift Users. The quality of the material will ensure durability throughout the years. SKINPLATE PLASTIC LAMINATE DOTTED RUBBER STAINLESS STEEL LINOLEUM Subject to change - please enquire for specific lead times. Page 5

6 DURABLITY & ECONOMY VENUS LIFT CAR The VENUS range of materials are aimed at durability and economy yet offer a variety of designs and finishes. LIFT CAR WALLS Self Supporting Skinplate FRONT RETURNS Standard: Dark Grey P8 Skinplate DOOR PANELS Standard: Dark Grey P8 Skinplate SKIRTING Standard: Dark Grey P8 Skinplate CAR OPERATING PANEL Standard: Dark Grey P8 Skinplate CEILING & LIGHTING Painted White w ith Direct Lighting by Halogen Spotlights FLOORING PVC HANDRAIL One off 40mm Diameter Tubular Stainless Steel Handrail located on rear w all VENTILATION Natural The car construction complies w ith the requirements of Directive 95/16/ EC The car & landing buttons w ith position/ movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply w ith DDA and Part M Building Regulations are available as an option. Page 6

7 ELEGANCE & STYLE JUPITER LIFT CAR The JUPITER design offers an attractive, flexible theme by way of a large selection of finishes and options LIFT CAR WALLS clad w ith Plastic Laminate FRONT RETURNS Standard: Dark Grey P8 Skinplate (Option: linished stainless steel) DOOR PANELS Standard: Dark Grey P8 Skinplate SKIRTING Standard: Dark Grey P8 Skinplate (Option: linished stainless steel) CAR OPERATING PANEL Standard: Dark Grey P8 Skinplate (Option: linished stainless steel) CEILING & LIGHTING Painted White w ith Direct Lighting by Halogen Spotlights (Option: suspended ceiling can be fitted) FLOORING PVC HANDRAIL One off 40mm Diameter Tubular Stainless Steel Handrail located on any w all VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car construction complies w ith the requirements of Directive 95/16/ EC The car & landing buttons w ith position/ movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply w ith DDA and Part M Building Regulations are available as an option. Page 7

8 PRACTICALITY & SIMPLICITY MARS LIFT CAR LIFT CAR WALLS Self Supporting Linished Stainless Steel FRONT RETURNS Linished Stainless Steel DOOR PANELS Linished Stainless Steel SKIRTING Linished Stainless Steel CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Painted White w ith Direct Lighting by Halogen Spotlights (Option: suspended ceiling can be fitted) FLOORING PVC HANDRAIL One off 40mm Diameter Tubular Stainless Steel Handrail located on any w all VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car construction complies w ith the requirements of Directive 95/16/ EC The car & landing buttons w ith position/ movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply w ith DDA and Part M Building Regulations are available as an option. Page 8

9 ROBUSTNESS & VARIETY OF DESIGN STAR LIFT CAR The STAR design features stainless steel finishes with a choice of 6 different patterns. LIFT CAR WALLS Pattern Stainless Steel FRONT RETURNS Pattern Stainless Steel DOOR PANELS Pattern Stainless Steel SKIRTING Linished Stainless Steel CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Painted White w ith Direct Lighting by Halogen Spotlights (Option: suspended ceiling can be fitted) FLOORING PVC HANDRAIL One off 40mm Diameter Tubular Stainless Steel Handrail located on any w all VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car construction complies w ith the requirements of Directive 95/16/ EC The car & landing buttons w ith position/ movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply w ith DDA and Part M Building Regulations are available as an option. Page 9

10 OPTIMA E OPTIONS Options Available: Car Ventilation Fan Natural Mirror on Rear/Side Wall Car Body w ith Side & Rear Wall in Framed Toughened & Laminated Glass Car Floor Recess (Max 20mm) Car and Landing Doors w ith Increased Height of 2100mm Landing Door Panels and Frames in Linished Stainless Steel Landing Door Panels and Frames in Polished Stainless Steel Framed Glass Car and Landing Doors Landing Entrance Infill Panels at all Floors Landing Entrance Infill Panels in Linished Stainless Steel Landing Entrance Infill Panels in Polished Stainless Steel Landing Entrance Infill Panels in Patterned Stainless Steel Digital Landing Position/Direction Indicator at all other Floors Braille and Tactile Embossing Fire Fighting Control to EN81-72 Duplex Control System Controller Cabinet in Linished Stainless Steel Pow er Supply w ith 60hz Rescue Device DDA and Part M Compliance Pack Option for UK Manufactured Controller Lester Control System s Page 10

11 LIFT CAR CEILINGS Lift car ceilings and lighting are one of the most important aspects of the car interior decoration. The y must provide functional light to meet required Lux levels whilst also being aesthetically pleasing. The standard GLE range includes direct lighting with halogen spot lights incorporated in the car ceiling. Other ornate arrangements available for bespoke cars. A selection of robust suspended ceilings are also available and can be selected from the range of options offered. These can be used across our full car range. CCL1 Direct Lighting HALOGEN SPOT LIGHTS CCL2 Suspended Ceiling HONEYCOMB GRILL CCL3 Suspended Ceiling STARS CCL4 Suspended Ceiling MORNING STARS CCL5 Suspended Ceiling RISING SUN Page 11

12 CAR CONTROLS COP - MODEL VENUS COP 01 COP 02 Full Height Car Operating Panel In stainless steel. DDA Compliant. Complete with Autodialler & Speech Unit COP 01 - Type LIP Indicator COP 02 - Type MPI Indicator Page 12

13 PUSHBUTTONS PB01 - BL SINGLE ILLUMINATION Stainless steel pressel and stainless steel halo Simultaneous illumination of halo & tactile legend. Pressel backw ard compatible w ith original BF range EN81-70 compliant TECHNICAL FEATURES Structure Mounting Fixing Pushbutton W iring Illumination Life Protection Contacts pol ycarbonate 3mm pr ojecting through faceplate Frontal mounti ng fixed byscrew-cut ring. Fixing thickness 0.8mm-5mm 1.8mm stroke Wires screwed on ter minals 4 red LED operations IP51 (dust & vertical water fall) 1 or 2 contacts, 2 contact version N/O onl y 1 contact version N/O & N/C PB02 - BD DUAL ILLUMINATION Stainless steel pressel and stainless steel halo Illumination of halo & tactile legend in Red & Blue Pressel backw ard compatible w ith original BF range EN81-70 compliant TECHNICAL FEATURES Structure Mounting Fixing Pushbutton W iring Illumination Life Protection Contacts pol ycarbonate 3mm pr ojecting through faceplate Frontal mounti ng fixed byscrew-cut ring. Fixing thickness 0.8mm-5mm 1.8mm stroke Wires screwed on ter minals Acceptance 4 led / Legend 1 led operations IP51 (dust & vertical water fall) 2 changeover contacts Page 13

14 PUSHBUTTONS Anti Vandal Solid Stainless Steel Pushbutton Suitable for hostile environments Front mounting withoutstuds 3 profiles available - Moon, Disc & Classic 3 colours available - Blue, Amber & Red 2 tags available with/without Braille - Caesar & Brutus EN81-70 DDA Compliant EN81-71 DDA Compliant Suitable for Fire Fighting Lifts Brass PVD Button also available PB03 - PANZER BUTTONS PB04 - SHERMAN BUTTONS TECHNICAL FEATURES Operating Stroke Life Illumination Contacts 1.8mm acti vation operations min Red/Blue or Amber high density LED 12/24Vac/dc or 120Vac. Also available non illuminated. 1 or 2 microswitches, C-NO/NC each. Separate circuits for microswitches & illumi nati on CAESAR TAG Tactile or Braille Tactile BRUTUS TAG Tactile or Braille Tactile Page 14

15 OPTIMA E INDICATOR OPTIONS IND LIP DOT MATRIX Size: 108mm x 75mm Available w ith or w ithout Bi-tonal Gong Available w ith Red or Blue display IND LIP 7 SEGMENT Size: 108mm x 75mm Available w ith or w ithout Bi-tonal Gong Available w ith Red or Blue display IND MPI DOT MATRIX Size: 134mm x 134mm Alarm, Overload, Pictogram & Indicators. Lift Data and Lift Company Logo can be displayed. Available w ith Red or Blue display IND MPI 7 SEGMENT Size: 134mm x 134mm Alarm, Overload, Pictogram & Indicators. Lift Data and Lift Company Logo can be displayed. Available w ith Red or Blue display Displa y Colour Options Red Display Blue Display Page 15

16 OPTIMA E INDICATOR OPTIONS IND GL/540 LCD Scrolling or Static Displayed Information Vertical or Horizontal Mounting Binary Coding or Ser ial Version EN81-70 Compliant Turquoise or Indigo Background Display Display Area: 105mm w ide x 58mm high Overall Size: 160mm w ide x 104mm high x 23mm deep The GL540 LCD Indicator can be easily programmed via a PC/laptop Changes can be made easily including changing the number of floors, floor names, w ay of mounting, text messages, appearance of arrows etc. IND GL/300 LCD Scrolling or Static displayed information Vertical or Horizontal Mounting Binary Coding or Ser ial Version EN81-70 Compliant Turquoise or Indigo Background Display Easy Programming via PC/Laptop Fits in a 100mm w ide Gilda surface mount landing plate Display Area: 36mm w ide x 67mm high Overall Size: 70mm w ide x 108mm high x 19mm deep Changes can be made easily including changing the number of floors, names of floors, way of mounting, text messages, appearance of arrows etc. Page 16

17 OPTIMA E INDICATOR OPTIONS IND GL/TFT Full Colour LCD Display. We have show n a typical layout. Background, position of lift data, time, Company details, font, colour etc is all to Client s choice. Presentation style programming via Window s CE based operating system. Images easily edited by copying to SD Card/USB or connection via LA N. Portrait or Landscape Display Screen Sizes Available: 8.4, 10, 12 (diagonally across) Display can include: Floor and Travel Directions of the Lift Time Based Information Floor Position Indication Warnings/Optional Information Date/Time Background Choice GLOBAL LIFT EQUIPMENT LTD Royal Hotel HOTEL BLUE Page 17

18 OPTIMA E LANDING FIXTURES LF 001 Gilda Surface Mount Stainless Steel Finish with single DDA compliant push button Stainless Steel Halo With or without Comfort Tone Gilda plates also available in Mirror Polish or Brass Coloured Finish LF 002 Gilda Surface Mount Stainless Steel Finish with two DDA compliant push buttons Stainless Steel Halo With or without Comfort Tone Gilda plates also available in Mirror Polish or Brass Coloured Finish LF 003 Gilda Surface Mount Stainless Steel Finish With LIP 7 Segment Indicator Or Dot Matrix Indicator With or without Gong Red or Blue illumination LF 004 Flat Plate Options available for all GLE Fixtures Stainless Steel, Mirror Polish or Brass Colour Finish Page 18