Complete Lift Design Solutions 2012 From Global Lift Equipment Ltd

Transcription

1 Complete Lift Design Solutions 2012 From Global Lift Equipment Ltd Global Lift Equipment Ltd H42/H43 Ashmount Enterprise Park, Flint, Flintshire, CH6 5YL. Tel: Fax:

2 THE GLOBAL RANGE OF LIFTS Global Lift Equipment are a well established supplier within the UK Lift Industry Specialising in design and supply of complete lifts and lift components Our in house UK Design Team work alongside Lift Companies/Architects/Specifiers and End Clients from conception to completion of a project to ensure that the ultimate customer receives the lift to their bespoke requirements. Working closely with our Notified Body (Bureau Veritas) gives us flexibility to accommodate difficult existing parameters which require specialist design. In addition to Machine Roomless Lifts, our wide range includes: Traction/Hydraulic with Machine Room Vehicle Lifts Scenic Lifts Lorry Lifts Bespoke Lifts To compliment our complete lifts we can offer internal or external Structures, both semi supported and free standing, along with various standard cladding options and finishes. Page 1

3 INTRODUCTION The OPTIMA - E is the ultimate lift system for traction lifts as it removes the need for a motor room above or adjacent to the lift shaft. We have developed and improved the OPTIMA product significantly over many years and now have a solution which is a market leader in the UK, the new OPTIMA E. The machine system is Gearless which makes the running costs very attractive, gives a very good ride quality and makes recovery under power failure and emergency conditions very easy and cost effective. Gearless Systems remove the need for complex remote handwinding systems or large banks of back-up batteries for power supply - a simple emergency recovering system controlling the brake on the machine is all that is needed. We only use high quality equipment for the OPTIMA - E: Machine: The Machine is manufactured by CEG as standard with option for a ZA Machine at extra cost if required. Controller: The Controller is a Lester Controls Panel manufactured in the UK with a Control Techniques Drive or at extra cost a Ziehl Abegg Drive. Doors: The Door Systems are Fermator with options for Anti-Vandal Doors or the new Heavy Duty Fermator Door System designed for the Local Authority Market - The Robusta. Rucksack Arrangement The Machine is located in the head of the lift shaft and mounted over guides. The standard design is a Rucksack Arrangement therefore loads are only applied to one wall and also allowing 3 sides lifts to be provided. Inverted Rucksack Arrangement Maximise small shaft space by having the car & counterweight guides in line providing a solution to install a Traction MRL in place of a Hydraulic Lift. Conventional Arrangement For larger loads or at your request, a Conventional Type Arrangement can be supplied with Lift Car Guides on the horizontal axis. The Controller is located as standard at the top floor in a cabinet size 450mm Wide x 250mm Deep x 2100mm High. The Drive is located within the cabinet unless high capacity requiring large Drive sizes then the Drive has to be located in larger cabinet on the landing or within the lift shaft. Alternatively the Controller can be located at any other location within the building, up to a maximum of 20m away from the machine on request at additional cost. Page 2

4 INTRODUCTION We have an extensive range of finishes available however should these finishes not suit your customers requirements we can provide at extra costs finishes tailored to suit your own customer needs. The OPTIMA-E is the complete answer to the increasing demand for compact space saving and environmentally conscious lifts. Standard pit 1150mm Standard headroom 3550mm Special headrooms of 3000mm and pits down to 1000mm with conventional guided arrangements, can be accommodated with additional safety features approved and certified with our notified body Bureau Veritas at extra cost. Installation is quick and easy equipment has been designed in close association with lift installers to reduce on site installation times. Page 3

5 GENERAL OVERVIEW Capacity: MRL Rucksack Arrangement - upto 1000kg MRL Conventional Arrangement - upto 4000kg MRL Inverted Guide Arrangement - upto 630kg Speed: Drive Unit: Power Supply: 1.0 m/s ACVVF - Options for 1.6m/s & 2m/s Compact Gearless & Purpose Designed Machine located above. 415v, 3 phase, 50hz Control System: Down Collective Microprocessor by Lester Controls Ltd Parameter Control and Fault Finding/Diagnostic Facility Programming and Real-Time Fault Logging Anti-nuisance Feature Car Preference Control Overload Indication Car and Landing Push Buttons and Hall Lanterns Power and Car Light Main Switch included Control Cabinet Located on Landing Autodialler with Intercom Option Illuminated Cabinet Fire Recall to Main Floor Entrances: Car Frame: Fixtures: VVVF Car Door Operator Complete with Set of Door Panels Complete Landing Entrances - Models 40/10 & 50/11 2 Hour UK Fire Rated Landings Aluminium Tracks Full Height Door Detector Fabricated Steel Structure with Fixed Sliding Guide Shoes and Lubricators Complete with Shaft Top Beams and Divertor Pulleys Counterweight Frame and Fillers Bi-directional Safety Device in Compliance with 95/16/EC Car Top Railing in Compliance with 95/16/EC Pit Screen (On Conventional Arrangement, support steels maybe required in headroom by others) Full Height COP complete with: Global standard Autodialler Unit Speech Unit Emergency Light Overload Display Gilda Landing Stations Complete with EN81-70 Compliant Buttons & Indicators - see options. Page 4

6 MRL DATA TABLE - RUCKSACK ARRANGEMENT MINIMUM PIT MINIMUM HEADROOM MINIMUM PIT MINIMUM HEADROOM Capacity Fully EN81.1 A3 Compliant Fully EN81.1 A3 Compliant With Design Certification & Approval from our Notified Body With Design Certification & Approval from our Notified Body 450KG 1060 mm 3405 mm 1060 mm 2900 mm 630KG 1110 mm 3405 mm 1110 mm 2900 mm 800KG 1110 mm 3405 mm 1110 mm 2900 mm 1000KG 1160 mm 3405 mm 1160 mm 2900 mm Pay Load Car Size Car Entrances Door Clear Opening Minimum Plumb Shaft (2PSO Door) Minimum Plumb Shaft (2PCO Door) 450 Kg 950X x x m/s 1:1 450 Kg 950X1300 2(180º) x x m/s 1:1 450 Kg 1000X x x m/s 1:1 450 Kg 1000X1250 2(90º) x1620 NO 1 m/s 1:1 450 Kg 1000X1250 2(180º) x x m/s 1:1 450 Kg 1000X x x m/s 1:1 450 Kg 1000X1250 2(180º) x x m/s 1:1 630 Kg 1100X x x m/s 2:1 630 Kg 1100X1400 2(90º) x1770 NO 1 m/s 2:1 630 Kg 1100X1400 2(180º) x x m/s 2:1 630 Kg 1100X x1920 NO 1 m/s 2:1 630 Kg 1100X x x m/s 2:1 630 Kg 1100X1400 2(90º) x1770 NO 1 m/s 2:1 630 Kg 1100X1400 2(180º) x x m/s 2:1 630 Kg 1100X x1920 NO 1 m/s 2:1 800 Kg 1350X x x m/s 2:1 800 Kg 1350X1400 2(90º) x1770 NO 1 m/s 2:1 800 Kg 1350X1400 2(180º) x x m/s 2:1 800 Kg 1350X x1920 NO 1 m/s 2:1 800 Kg 1350X x x m/s 2:1 800 Kg 1350X1400 2(90º) x1770 NO 1 m/s 2:1 800 Kg 1350X1400 2(180º) x x m/s 2:1 800 Kg 1350X x1920 NO 1 m/s 2: Kg 1100X x x m/s 2: Kg 1100X2100 2(90º) x2470 NO 1 m/s 2: Kg 1100X2100 2(180º) x x m/s 2: Kg 1100X x2620 NO 1 m/s 2: Kg 1400X x x m/s 2: Kg 1400X1600 2(90º) x1970 NO 1 m/s 2: Kg 1400X1600 2(180º) x x m/s 2: Kg 1400X x2120 NO 1 m/s 2:1 Information Not for Construction Purposes without prior approval on project basis. Speed Susp Page 5

7 MRL DATA TABLE - CONVENTIONAL ARRANGEMENT MINIMUM PIT MINIMUM HEADROOM MINIMUM PIT MINIMUM HEADROOM Capacity Fully EN81.1 A3 Compliant Fully EN81.1 A3 Compliant With Design Certification & Approval from our Notified Body With Design Certification & Approval from our Notified Body 450KG 940 mm 3405 mm 940 mm 2920 mm 630KG 940 mm 3405 mm 940 mm 2920 mm 800KG 940 mm 3405 mm 940 mm 2920 mm 1000KG 940 mm 3405 mm 940 mm 2920 mm Pay Load Car Size Car EntranceS Door Clear Opening Minimum Plumb Shaft (2PSO Door) Minimum Plumb Speed Susp Shaft (2PCO Door) 450 Kg 950X x x m/s 2:1 450 Kg 950X1300 2(180º) x x m/s 2:1 450 Kg 1000X x x m/s 2:1 450 Kg 1000X1250 2(180º) x x m/s 2:1 450 Kg 1000X x x m/s 2:1 450 Kg 1000X1250 2(180º) x x m/s 2:1 630 Kg 1100X x x m/s 2:1 630 Kg 1100X1400 2(180º) x x m/s 2:1 630 Kg 1100X x x m/s 2:1 630 Kg 1100X1400 2(180º) x x m/s 2:1 800 Kg 1350X x x m/s 2:1 800 Kg 1350X1400 2(180º) x x m/s 2:1 800 Kg 1350X x x m/s 2:1 800 Kg 1350X1400 2(180º) x x m/s 2: Kg 1100 x x x m/s 2: Kg 1100 x (180º) x x m/s 2: Kg 1100 x x x m/s 2: Kg 1100 x (180º) x x m/s 2: Kg 1400 x x x m/s 2: Kg 1400 x (180º) x x m/s 2: Kg 1400 x x x m/s 2: Kg 1400 x (180º) x x m/s 2:1 Information Not for Construction Purposes without prior approval on project basis. Page 6

8 MRL DATA TABLE - INVERTED RUCKSACK ARRANGEMENT MINIMUM PIT MINIMUM HEADROOM MINIMUM PIT MINIMUM HEADROOM Capacity Fully EN81.1 A3 Compliant Fully EN81.1 A3 Compliant With Design Certification & Approval from our Notified Body With Design Certification & Approval from our Notified Body 320KG 1200 mm 3660 mm 940 mm 3660 mm 375KG 1200 mm 3660 mm 940 mm 3660 mm 450KG 1200 mm 3660 mm 1010 mm 3660 mm 630KG 1200 mm 3660 mm 1060 mm 3660 mm Pay Load Car Size Car Entrances Door Clear Opening Minimum Plumb Shaft (2PSO Door) Minimum Plumb Shaft (3PSO Door) Information Not for Construction Purposes without prior approval on project basis. Speed Susp 320 Kg 800x N/A 1200x m/s 1:1 320 Kg 800x1000 2(90º) 700 N/A 1300x m/s 1:1 320 Kg 800x1000 2(180º) 700 N/A 1200x m/s 1:1 320 Kg 800x N/A 1300x m/s 1:1 375 Kg 900x x1400 N/A 1 m/s 1:1 375 Kg 900x1100 2(90º) x1450 N/A 1 m/s 1:1 375 Kg 900x1100 2(180º) x1460 N/A 1 m/s 1:1 375 Kg 900x x1500 N/A 1 m/s 1:1 450 Kg 1000x N/A 1400x m/s 1:1 450 Kg 1000x1200 2(90º) 800 N/A 1500x m/s 1:1 450 Kg 1000x1200 2(180º) 800 N/A 1400x m/s 1:1 450 Kg 1000x N/A 1500x m/s 2:1 630 Kg 1100x x1700 N/A 1 m/s 2:1 630 Kg 1100x1400 2(90º) x1700 N/A 1 m/s 2:1 630 Kg 1100x1400 2(180º) x1760 N/A 1 m/s 2:1 630 Kg 1100x x1800 N/A 1 m/s 2:1 Page 7

9 RUCKSACK ARRANGEMENT Page 8

10 CONVENTIONAL ARRANGEMENT Page 9

11 INVERTED GUIDE ARRANGEMENT Page 10

12 DURABLITY & ECONOMY Skinplate VENUS LIFT CAR The VENUS range of materials are aimed at durability and economy yet offer a variety of designs and finishes. LIFT CAR WALLS Modular Skinplate from range FRONT RETURNS Modular Skinplate from range DOOR PANELS Primed Epoxy Doors (Option: linished stainless steel) SKIRTING Modular Skinplate from range CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range HANDRAIL One off 40mm Diameter Stainless Steel Tubular Handrail located on rear wall VENTILATION Natural The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option. Page 11

13 ELEGANCE & STYLE Laminate The JUPITER design offers an attractive, flexible theme by way of a large selection of finishes and options LIFT CAR WALLS Laminate (on Wood) from range FRONT RETURNS Laminate (on Wood) from range (Option: Linished Stainless Steel) DOOR PANELS Linished Stainless Steel SKIRTING Linished Stainless Steel CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range JUPITER LIFT CAR HANDRAIL One off 40mm Diameter Tubular Stainless Steel Handrail located on any wall VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option. Page 12

14 MARS LIFT CAR PRACTICALITY & SIMPLICITY Linished Stainless Steel LIFT CAR WALLS Self Supporting Linished Stainless Steel FRONT RETURNS Linished Stainless Steel DOOR PANELS Linished Stainless Steel SKIRTING Linished Stainless Steel CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range HANDRAIL One off 40mm Diameter Stainless Steel Tubular Handrail located on any wall VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option. Page 13

15 STAR LIFT CAR ROBUSTNESS & VARIETY OF DESIGN Patterned Stainless Steel The STAR design features stainless steel finishes with a choice of different patterns. LIFT CAR WALLS Patterned Stainless Steel FRONT RETURNS Patterned Stainless Steel DOOR PANELS Patterned Stainless Steel SKIRTING Linished Stainless Steel (option for Patterned Stainless Steel) CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range HANDRAIL One off 40mm Diameter Tubular Stainless Steel Handrail located on any wall VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option. Page 14

16 OPTIMA E - Options Available Option for ZA Machine Option for Windcrest Autodialler Option for Dewhurst Pusbuttons Car Ventilation Fan Natural Mirror on Rear/Side Wall Car Body with Side & Rear Wall in Framed Toughened & Laminated Glass Car Floor Recess (Max 20mm) Car and Landing Doors with Increased Height of 2100mm Anti Vandal Door Panels available or Heavy Duty ROBUSTA doors designed for Local Authorities Landing Door Panels and Frames in Linished, Mirror Polish or Patterned Stainless Steel Framed Glass Car and Landing Doors Landing Entrance Infill Panels Landing Entrance Infill Panels in Linished, Mirror Polish or Patterned Stainless Steel Indicator at all other Floors - see range Braille and Tactile Embossing (Ceasar Tags) Duplex Control System Controller Cabinet in Linished Stainless Steel or Patterned Stainless Steel Alternative Location for Controller Available Power Supply with 60hz Rescue Device DDA and Part M Compliance Pack Tip Up Seat Option - 2 models available Continuous Handrails Page 15

17 OPTIMA E - Options Available Options for BREAAM Credit Two Requirements: (any three) Lift to operate in a standby mode during off peak and idle periods VVVF drive is supplied as standard Lift will be supplied with Regenerative Drive, so the energy generated by the lift is returned back to the grid or used elsewhere The Lift Car will be supplied with energy efficient lighting Fire Fighting Control or Evacuation Control to EN81-72 Includes: IPX rated switches on all doors and stop switches Models Panzer or Sherman pushbuttons IP rated D43 Indicators Ladder outside the car Fireman s hatch in roof Windcrest autodialler with Evacuation system Flush mounted speaker and back box for Evacuation Page 16

18 LIFT CAR FINISHES - Skinplate PPS-29 GREEN PPS-28 RED F-15 SILVER Subject to change - please enquire for specific lead times. Page 17

19 LIFT CAR FINISHES - Laminate U522 ST15 Powder Blue U514 ST15 Baltic Blue U323 ST15 Chilli Red U212 ST2 Cream U611 ST15 Turquoise Green H3389 ST24 Natural Light Oak H1951 ST15 Sienna Calvados H1883 ST15 Light Diamond Maple Subject to change - please enquire for specific lead times. Page 18

20 LIFT CAR FINISHES - Stainless Brushed 441 Stainless Steel Mirror Polish Stainless Steel Pattern - Linen Pattern - Squares Pattern - 5WL Pattern - 2WL Subject to change - please enquire for specific lead times. Page 19

21 LIFT CAR FLOORING - Rubber Grey Button Rubber Black Button Rubber HANDRAILS All handrails are round - 40mm to comply with EN81-70 PM - Chromium Plated (mirror polish) Handrail - extra cost PN - Black Painted Handrail - included PD - Gold Anodised Handrail - extra cost PR - Stainless Steel Handrail - included Continuous Handrails also available at extra cost Page 20

22 SUSPENDED CEILINGS Lift car ceilings and lighting are one of the most important aspects of the car interior decoration. They must provide functional light to meet required Lux levels whilst also being aesthetically pleasing. The standard GLE range includes all models shown below - T1,T2,T3,T4,T5 & T8 These Ceilings are available in Black or White. Other ceilings at extra cost: TC - Ice laminated Stadip glass 3+3 with a stainless Steel frame TD - White Dulaconcord ceiling with methacrylate on a stainless steel frame TE - Bronze Coloured lamiglas mirror with black-framed halogen lights on a black square frame TG - Black Primed sheet with black framed halogen lights Page 21

23 SAMPLE BESPOKE LIFT CARS Lift Car: Ceiling: Floor: Mirror: COP: Decorative Laminate with golden Stainless steel plates. Round Profiles in stainless steel AISI-304 on rear corners Suspended cork type with gold framed Halogen lights with gold stainless steel Square frame Castano Verdoso Granite Bronze colour half mirror lamiglas with A decorative gold stainless steel Handrail Gold stainless steel Lift Car: Ceiling: Floor: Mirror: COP: Decorative Laminate fixed with Stainless steel profile suspended painted black coat sheets with methacrylate Black button rubber Bronze colour half mirror lamiglas with A decorative stainless steel handrail Stainless steel Column Page 22

24 SAMPLE BESPOKE LIFT CARS Lift Car: Decorative Laminate Ceiling: Suspended Ice laminated glass Stadip 3+3 with a stainless steel frame Floor: Red Porrino Granite Mirror: Bronze colour half mirror lamiglas COP: Stainless steel Column Lift Car: Bronze coloured lamiglas mirror between stainless steel AISI-304 modules with vertical round profiles of stainless steel in the rear corners Ceiling: Bronze coloured lamiglas mirror with black frame halogen lights on a black square frame Floor: Negro Sudafrica granite COP: Stainless steel Page 23

25 PUSHBUTTONS - Standard Range PB01 - BL SINGLE ILLUMINATION Stainless steel pressel and stainless steel halo Simultaneous illumination of halo & tactile legend. Pressel backward compatible with original BF range EN81-70 compliant TECHNICAL FEATURES Structure Mounting Fixing Pushbutton Wiring Illumination Life Protection Contacts polycarbonate 3mm projecting through faceplate Frontal mounting fixed by screw-cut ring. Fixing thickness 0.8mm-5mm 1.8mm stroke Wires screwed on terminals 4 red LED operations IP51 (dust & vertical water fall) 1 or 2 contacts, 2 contact version N/O only 1 contact version N/O & N/C PB02 - BD DUAL ILLUMINATION Stainless steel pressel and stainless steel halo Illumination of halo & tactile legend in Red & Blue Pressel backward compatible with original BF range EN81-70 compliant TECHNICAL FEATURES Structure Mounting Fixing Pushbutton Wiring Illumination Life Protection Contacts polycarbonate 3mm projecting through faceplate Frontal mounting fixed by screw-cut ring. Fixing thickness 0.8mm-5mm 1.8mm stroke Wires screwed on terminals Acceptance 4 led / Legend 1 led operations IP51 (dust & vertical water fall) 2 changeover contacts NB for EN81-72 option, Panzer or Sherman pushbuttons will be supplied Page 24

26 PUSHBUTTONS - Optional Range Anti Vandal Solid Stainless Steel Pushbutton Suitable for hostile environments Front mounting without studs 3 profiles available - Moon, Disc & Classic 3 colours available - Blue, Amber & Red 2 tags available with/without Braille - Caesar & Brutus EN81-70 DDA Compliant EN81-71 DDA Compliant Suitable for Fire Fighting Lifts Brass PVD Button also available PB03 - PANZER BUTTONS PB04 - SHERMAN BUTTONS TECHNICAL FEATURES Operating Stroke Life Illumination Contacts 1.8mm activation operations min Red/Blue or Amber high density LED 12/24Vac/dc or 120Vac. Also available non illuminated. 1 or 2 microswitches, C-NO/NC each. Separate circuits for microswitches & illumination CAESAR TAG Tactile or Braille Tactile BRUTUS TAG Tactile or Braille Tactile Page 25

27 INDICATORS - Standard Range IND LIP D43 DOT MATRIX Size: 108mm x 75mm Available with or without Bi-tonal Gong Available with Red or Blue display IND LIP D43 7 SEGMENT Size: 108mm x 75mm Available with or without Bi-tonal Gong Available with Red or Blue display NB for EN81-72 IPX rated D43 indicators are supplied as standard Page 26

28 INDICATORS - Optional Range IND GL/TFT-LITE Using the latest technology, our TFT LITE series can illustrate vivid images with high color contrast and resolution At only 18.5mm in depth, the compact, ultra slim design makes it easy for installation when space is limited. With the new TFT LITE series, it enhances your building s image instantly at a reasonable price. Features: TFT Color LCD of color capability up to 262K colors Super bright with high contrast ratio Wide viewing angle Aesthetic display of basic lift information Ultra Slim of only mm depth Binary VDC supply Car Display Landing Display Displays are EN81-70 DDA Compliant. Portrait & Landscape displays Lift is at the Ground Floor waiting for a call Screens display sizes: 4.3, 5.6 & 7 Page 27

29 IND GL/TFT Full Colour LCD Displays for the Lift Car We have shown a typical layout. Background, position of lift data, time, Company details, font, colour etc is all to Client s choice. Presentation style programming via Windows CE based operating system. Images easily edited by copying to SD Card/USB or connection via LAN. Portrait or Landscape Display Screen Sizes Available: 8, 10.4, 12.1 (diagonally across) INDICATORS - Optional Range Display can include: Floor and Travel Directions of the Lift Time Based Information Floor Position Indication Warnings/Optional Information Date/Time Background Choice GLOBAL LIFT EQUIPMENT LTD Royal Hotel HOTEL BLUE Page 28

30 LANDING PLATES - Standard Range LF 001 H23 Gilda Surface Mount Stainless Steel Finish with single DDA compliant push button - see options Stainless Steel Halo With Comfort Tone Gilda plates also available in Mirror Polish or Brass Coloured Finish at extra cost LF 002 H23 Gilda Surface Mount Stainless Steel Finish with two DDA compliant push buttons - see options Stainless Steel Halo With Comfort Tone Gilda plates also available in Mirror Polish or Brass Coloured Finish at extra cost LF 003 H23 Gilda Surface Mount Stainless Steel Finish With LIP 7 Segment Indicator Or Dot Matrix Indicator With or without Gong Red or Blue illumination See Options Gilda plates also available in Mirror Polish or Brass Coloured Finish at extra cost NB for EN81-72 option, Panzer or Sherman pushbuttons & IPX rated D43 Indicators will be supplied Page 29