DRIVING LAMP Lighting. General Lighting. Connector LIGHTING LIGHTING LED. LEDs EMERGENCY & WORK EMERGENCY & WORK LIGHTING LIGHTING LED DRIVING LIGHTS

Transcription

1 THE General DRIVING LAMP Lighting Unique Glare Shield Driving Lights 139 Driving Lights 144 Daytime Running Lights 17 Headlight Inserts & Convers ions 172 Sealed Beams 176 Forward & Side Lighting 176 Rear Lighting 18 Safety Lights 186 Workshop Lights 186 Interior Lights 187 Headlight Connectors 188 Globe Holders 192 Virtually Unbreakable Lens General Lighting >>>> Premium 1W Halogen Globe Advanced Free Form Reflectors 8mm Spacer Block Pre-Wired with Waterproof Connectors The Ultima 2 housing is constructed of an extra tough glass reinforced polymer with a proven heavy duty 4 position mounting system using all stainless steel hardware. Using advanced free form reflector technology protected by a virtually unbreakable polycarbonate lens, Ultima delivers performance, style and reliability making it the ultimate driving lamp. The complete kit includes lens protectors, mounting bracket spacer blocks plus the user friendly Plug n Play wiring harness. s 9 x 5W Light Output 3187 Lumens Current Mount Adjustable single stud Connector DT4-2P Environmental IP68 Accessories available on page mm mm Beam Pattern 45 17mm Great Whites Driving Light 18 Round Lens Material Multi Xenon H.I.D Great Whites Driving Lights Great Whites Driving Light 9 Round 9V-32V Halogen Blue Great Whites Driving Lights Beam Halogen Voltage Stainless Steel Bolts and Nuts From extensive research and development benchmarked against the world s best, the Narva Ultima 2 has evolved setting a new standard in driving lamps. Unrivalled in light output performance in Halogen or H.I.D, the Ultima 2 is stylish and modern in its design with a rugged construction that belies its looks. Visit Quantum Pro for a full, dynamic listing showcasing up to the minute new products from our Automotive Electrical Accessories range. 9 Round Internal Ballast (H.I.D lamps only) PERFORMANCE STYLE RELIABILITY Lighting Light i GWR591 4 Position Mounting Bracket Extra Tough Glass Reinforced Polymer Housing e al er GenLLiLighting i g al er en en G G e Lighting ULTIMATE 17mm GWR Round Voltage 9V-32V Beam Multi Lens Material s 18 x 5W Light Output 6375 Lumens Current Mount Adjustable single stud Connector DT4-2P Environmental IP68 Accessories available on page mm Beam Pattern mm Great Whites Driving Light 12 Round Voltage 9V-32V Beam Multi Lens Material s 12 x 5W Light Output 4 Lumens Current Mount Adjustable single stud Connector DT4-2P Environmental IP68 Accessories available on page mm 183mm Beam Pattern mm Round GWR Great Whites Driving Light 9 Bar Low Mount mm GWB591LM Bar Low Mount Voltage 9V-32V Beam Multi Lens Material s 9 x 5W Light Output 3187 Lumens Current Mount Dampened adjustable slide Connector DT4-2P Environmental IP68 Accessories available on page Can be used with Number Plate Bracket for late model vehicles Beam Pattern 5mm 6 79mm

2 Great Whites Driving Lights Great Whites Driving Lights Great Whites Driving Light 9 Bar GWB591 9 Bar Great Whites Driving Light 18 Bar GWB Bar Voltage Beam Lens Material s 9V-32V Multi 9 x 5W Voltage Beam Lens Material s 9V-32V Multi 18 x 5W Light Output 3187 Lumens Current Mount Side mount bracket with 36 movement Connector DT4-2P Environmental IP68 Accessories available on page mm Light Output 6375 Lumens Current Mount Side mount bracket with 36 movement Connector DT4-2P Environmental IP68 Accessories available on page Beam Pattern Great Whites Driving Light 12 Bar 79mm 6mm 64.2mm GWB5121 Voltage Beam 12 Bar 9V-32V Multi 79mm 6mm Beam Pattern Lens Material s Light Output 12 x 5W 4 Lumens Current Mount Side mount bracket with 36 movement Connector DT4-2P Environmental IP68 Accessories available on page Beam Pattern mm 6mm mm Great Whites Driving Light Accessories Lightforce Driving Lights Great Whites Number Plate Bracket Mount under the number plate Designed to hide under all number plates Perfect for mounting auxiliary lights to late model vehicles without the addition of a nudge or bullbar. 14 LANCE Performance All Round (Twin Pk) RMDL14HT 12 Volt 75W Xenophot Halogen Compact performance for any size or vehicle type Adjustable 14mm Twin Pack GWA1 Great Whites Lens Covers with Dust Seals Part No. Lens Colour Lens Material Packaging GWA3 Clear with Gasket Box GWA4 Blue with Gasket Box GREAT WHITES ACC. 179mm 138mm 142mm 38mm Light weight polycarbonate, glass filled nylon composite contruction GL5 Globe 12 Volt 75W to suit standard 14 Series driving lights REFH14 14mm Reflector housing complete with reflector and lens HARMDL Replacement arm to suit RM and RMD lights ACX244 Quick fit driving light wiring harness GWA5 Yellow with Gasket Box 55mm 83mm Only showing side view spot pattern GWA6 Red with Gasket Box Great Whites Lock Nuts Security key included Part No. Dia. Packaging GWA9 8mm Blister 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m 17 STRIKER Striking Light Output (Twin Pk) RMDL17HT 12 Volt 1W Xenophot Halogen Compact performance but with optimum reflector size Adjustable GWA2 1mm Blister 17mm Twin Pack Great Whites Wiring Harness Rocker switch, able to be positive or negatively switched Part No. Volt Packaging GWA7 Blister GWA8 24V Blister 155mm 173mm 195mm 22mm 55mm 1mm GL2 Globe 12 Volt 1W suits standard 17 and 24 series driving lights GL13 Globe 24 Volt 1W suits standard 17 and 24 series driving lights HARMDL Replacement arm to suit RM and RMDL lights ACX244 Quick fit driving light wiring harness Only showing side view spot pattern 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m

3 Lightforce Driving Lights Lightforce Driving Lights 17 STRIKER Striking Light Output (Twin Pk) RMDL17HT2 24 Volt 1W Halogen 21 Genesis Offroad Light Dressed for the City DL21 12 Volt 1W Halogen Spot Compact performance but with optimum reflector size Adjustable 17mm Twin Pack Lightweight polycarbonate construction 21mm Single 24V GL2 Globe 12 Volt 1W suits standard 17 and 24 series driving lights GL13 Globe 24 Volt 1W suits standard 17 and 24 series driving lights HARMDL Replacement arm to suit RM and RMDL lights ACX244 Quick fit driving light wiring harness 195mm 155mm 173mm 22mm 21mm 233mm Wide beam pattern - DL21W GL2 Globe 12 Volt 1W to suit standard 21 halogen driving lights DL21MB Mounting Base Only showing side view spot pattern 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m 17 STRIKER Striking Light Output (Twin Pk) 55mm 1mm Only showing side view spot pattern 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m 21 Genesis Offroad Light Dressed for the City HID17T 12 Volt 35W HID 5K Compact performance but with optimum reflector size Adjustable DL21H 12 Volt 35W HID Spot Lightweight polycarbonate construction with internal ballast 21mm 17mm Twin Pack Focal point of bulb is optimised to suit the Lightforce parabolic reflectors 1.2m lead between the ballast and driving light Replacement 17mm Reflector HID housing bulb suits complete GL RM / RMDL with 5 K reflector - Super White HARMDL Replacement arm to suit RM and RMDL lights ACX244 Quick fit driving light wiring harness Only showing side view spot pattern 155mm 173mm 195mm 22mm 55mm 1mm 21mm 233mm Single Wide beam pattern - DL21HW. GL2 Globe 12 Volt 1W to suit standard 21 halogen driving lights DL21MB Mounting Base Only showing side view spot pattern 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m Lightforce Driving Lights Lightforce Driving Lights 21 Genesis Offroad Light Dressed for the City DL21H5W 12/24 Volt 5W HID Wide Cornering 24 BLITZ The Long Distance Performer (Twin Pk) HID24T 12 Volt 35W HID 5K Lightweight polycarbonate construction with internal ballast Adjustable 21mm Ideal long distance performance light Adjustable 24mm Single Twin Pack 12/24V Multi voltage balast GL27 Globe 5W 5K Super White to suit standard 21 HID driving lights DL21MB Mounting Base 21mm 233mm 242mm 177mm 242mm Replacement 17mm Reflector HID housing bulb suits complete GL RM / RMDL with 5 K reflector - Super white REFH24 24mm reflector housing complete with reflector and lens HARMDL Replacement arm to suit RM and RMDL lights ACX244 Quick fit driving light wiring harness Only showing side view spot pattern 55mm 122mm Only showing side view spot pattern 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m 24 BLITZ The Long Distance Performer (Twin Pk) 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m 24 BLITZ The Long Distance Performer (Twin Pk) RMDL24T 12 Volt 1W Xenophot Halogen Ideal long distance performance light Adjustable RMDL24T2 24V 1W Halogen Ideal long distance performance light Adjustable 24mm Twin Pack GL2 Globe 12 Volt 1W suits standard 17 and 24 series driving lights GL13 Globe 24 Volt 1W suits standard 17 and 24 series driving lights REFH24 24mm reflector housing complete with reflector and lens HARMDL Replacement arm to suit RM and RMDL lights ACX244 Quick fit driving light wiring harness Only showing side view spot pattern 177mm 242mm 55mm 122mm 242mm 177mm 242mm 55mm 122mm 242mm 24mm Twin Pack 24V Replacement 17mm Reflector HID housing bulb suits complete GL RM / RMDL with 5 K reflector - Super white REFH24 24mm reflector housing complete with reflector and lens HARMDL Replacement arm to suit RM and RMDL lights ACX244 Quick fit driving light wiring harness Only showing side view spot pattern 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m

4 Lightforce Driving Lights Lightforce HID Driving Lights 24XGT The Tough Off Road Light DL24XGT 12 Volt 1W Xenophot Halogen 24HID Truly Annihilating Light DL24HID 12 Volt 35W HID Ideal long distance performance light Spot (Optional ) 24mm Single Unit Ultimate long range driving light Spot (Optional ) 24mm Single Unit 24V GL2 Globe 12 Volt 1W suits standard 17 and 24 series driving lights GL13 Globe 24 Volt 1W suits standard 17 and 24 series driving lights HID24GKT 24HID and 24XGT - gasket to suit rear access cover HID24MT 24HID & XGT mount ACX244 Quick fit driving light wiring harness 247mm 265mm 247mm 265mm Focal point of bulb is optimised to suit the Lightforce parabolic reflectors GL Replacement HID bulb to suit RM / RMDL HID24DLLOOM 24HID / 24XGT - moulded 12 / 24 Volt input plug and wires HID24GKT 24HID and 24XGT - gasket to suit rear access cover HID24MT 24HID & XGT Mount ACX244 Quick fit driving light wiring harness Only showing side view spot pattern Only showing side view spot pattern 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m 24XGT The Tough Off Road Light 17mm 68mm 17mm 68mm 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m 24HID Truly Annihilating Light DL24XGT24 24 Volt 1W Halogen Ideal long distance performance light Spot (Optional ) DL24HID24 24 Volt 35W HID Ultimate long range driving light Spot (Optional ) 24mm Single Unit 24V 24mm Single Unit 24V Focal point of bulb is optimised to suit the Lightforce parabolic reflectors GL2 Globe 12 Volt 1W suits standard 17 and 24 series driving lights GL13 Globe 24 Volt 1W suits standard 17 and 24 series driving lights HID24GKT 24HID and 24XGT - gasket to suit rear access cover HID24MT 24HID & XGT mount ACX244 Quick fit driving light wiring harness Only showing side view spot pattern 247mm 265mm 17mm 68mm 247mm 265mm 17mm 68mm GL Replacement HID bulb to suit RM / RMDL HID24DLLOOM 24HID / 24XGT - moulded 12 / 24 Volt input plug and wires HID24GKT 24HID and 24XGT - gasket to suit rear access cover HID24MT 24HID & XGT Mount ACX244 Quick fit driving light wiring harness Only showing side view spot pattern 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m 15m 3m 45m 6m 75m 9m 15m 12m 135m 15m 165m 18m Lightforce Driving Light Accessories Lightforce Driving Light Accessories Filter Covers Colour Used for 14 Lance TM 17 Striker TM 21 Genesis TM XGT/HID 24 Blitz TM / Upgrade RMKIT42 Light Force HID Upgrade 12 Volt 42K Clear Standard Use FCLD FCSD F21C FCBD Crystal Blue Increased Clarity FBLUCLD FBLUCSD F21CB FBLUCBD Yellow Fog, silt, haze and dust FYLD FYSD F21Y FYBD HID upgrade kit to suit single RMDL 42K natural white 35W Amber Off road, silt, haze and dust FALD FASD - FABD Blue Snow, rain and sea spray FBLULD FBLUSD - FBLUBD Black Protective cover CBLKLD CBLKSD - CBLKBD Clear Standard use FCLWD FCSWD F21WC - Crystal Blue Increased clarity FBLUCLWD FBLUCSWD F21WCB - Yellow Fog, silt, haze and dust FYLWD FYSWD F21WY - Clear Standard Use - FCSWSD F21CC FCBWD Crystal Blue Increased clarity - FBLUCSWSD F21CCB FBLUCBWD Yellow Fog, silt, haze and dust - FYSWSD F21CY FYBWD Amber Offroad, silt, haze and dust - FASWSD - FABWD Blue Snow, rain and sea spray - FBLUSWSD - FBLUBWD Spot Wide Combo LIGHTFORCE ACC LIGHTFORCE ACC RMKIT5 Lock Nuts ATN1MM Greatly increases light output Fully sealed external ballast with long lead, heavy duty harness and weather proof connectors Light Force HID Upgrade 12 Volt 5K HID upgrade kit to suit single RMDL 5K natural white 35W Greatly increases light output Fully sealed external ballast with long lead, heavy duty harness and weather proof connectors Security Nuts Lightforce Anti Theft Lock Nuts Each kit consists of two half dome coded nuts and one keyed socket requiring a 21mm, or These nuts will fit all Lightforce driving lights and other lights using a 1mm bolt (M1 x 1.5) Replacement Globes Part No. GL2 Globe 12 Volt 1W to suit standard 17 and 24 series driving lights GL13 Globe 24 Volt 1W to suit standard 17 and 24 series driving lights GL5 Globe 12 Volt 75W to suit standard 14 series driving lights GL14 Globe- Handheld 12 Volt 3W to suit Enforcer lights GL1 Globe- Handheld 12 Volt 35W IR higher wattage upgrade to suit Enforcer lights GL23 Replacement - Ion yellow HID bulb to suit RMDL HID 32 K GL24 Replacement - Natural white HID bulb to suit RM / RMDL 42 K GL Replacement - Super white HID bulb to suit RM / RMDL 5 K HIDBULBASS HID-Colour bulb temperature and starter kit 42 K (replaced as an assembly)

5 Hella HID Driving Light Hella HID Driving Light Predator ix Series XGD W High Boost ix XGD Integrated Ballast Pencil Beam W High Boost ix XGD Integrated Ballast Spread Beam V 24V 35W High Boost ix XGD Integrated Ballast Spread Beam To suit heavy duty applications 12/24V Predator Series XGD High Boost 1367HB 35W High Boost XGD Pencil Beam 1368HB 35W High Boost XGD Spread Beam 1368HB-24V 24V 35W High Boost XGD Spread Beam Suitable for heavy duty applications 42W Total (includes ballast) Supplied with allen keys and protective cover, Part No mm 153mm 233mm 35W globe (42W total) XN41 12 / 24 Volt 35W D1s globe to suit 8141 Clear protective cover HB ix pencil beam insert HB ix spread beam insert Chrome Rim Pencil Beam Spread Beam 3 12/24V 35W globe (42W total) XN41 12 / 24 Volt 35W D1s globe to suit 81 Protective cover 8126 Protective grille 222mm 8141 Clear protective cover Volt XGD wiring harness HB.1 HB pencil beam insert HB.1 HB spread beam insert 13mm Ballast 12 Volt DC 95mm Lens retaining rim 233mm 1mm Bracket assembly and loom M8 scew set of 2 91mm 93mm 55mm Pencil Beam Spread Beam Hella HID Driving Light Hella Driving Light Rallye FF 4 Compact Ix Series XGD W High Boost ix XGD Integrated Ballast Pencil Beam W High Boost ix XGD Integrated Ballast Spread Beam Rallye FF 4 Compact Series XGD W High Compact XGD Driving Light Pencil Beam W High Compact XGD Driving Light Spread Beam To suit heavy duty applications 35W globe (42W total) XN41 12/24 Volt 35W D1s globe to suit 8155 Clear protective cover HB pencil beam insert Volt XGD wiring harness Volt XGD wiring harness Pencil Beam 3 17mm Compact Xenon gas discharge driving Light Suitable for heavy duty applications W globe (42W total) XN41 12/24 Volt 35W D1s globe to suit 8155 Clear protective cover HB pencil beam insert Volt XGD wiring harness Volt XGD wiring harness Ballast 12 Volt DC Ballast 24 Volt DC Bracket and loom assembly Spread Beam mm 17mm 1mm 95mm 17mm 1mm 7mm 93mm 55mm Pencil Beam Spread Beam

6 Hella HID Driving Light Hella Driving Light Rallye FF 4 Series W Pencil Beam - Black Housing W Spread Beam - Black Housing 1365CHROME 1W Pencil Beam - Chrome Housing 1366CHROME 1W Spread Beam - Chrome Housing High performance driving light with weather proof metal housing Suitable for extreme off road environments Supplied with allen keys and protective cover, Part No. 81 1W 81 Protective cover 8126 Protective grille 8141 Clear protective cover Pencil beam insert Spread beam insert Rallye FF 4 Compact Series - Halogen 138 1W Compact Pencil Beam - Black Housing W Compact Spread Beam - Black Housing 138CHROME 1W Compact Pencil Beam - Chrome Housing 1378CHROME 1W Compact Spread Beam - Chrome Housing Compact driving light with weather proof metal housing Suitable for heavy duty applications 1W 8155 Clear protective cover Pencil beam Insert Spread beam Insert Bracket assembly and loom CHROME.8 Chrome bracket assembly and loom Male and female socket connector set M8 screw set of Lens retaining rim Bracket assembly and loom CHROME.7 Chrome lens retaining rim CHROME.8 Chrome bracket assembly and loom Pencil Beam 3 17mm Pencil Beam Spread Beam Spread Beam mm 13mm 233mm 115mm 17mm mm 5mm Hella Driving Light Hella Driving Light Rallye FF 1 Series - Halogen 137 1W Pencil Beam Driving Light W Spread Beam Driving Light Rallye 2 Series - Halogen 136 1W Pencil Beam Driving Light W Spread Beam Driving Light Free form (FF) reflector and heavy duty metal bracket 1W / High beam headlight only 818 Protective cover 8146 Clear protective cover Pencil beam insert Spread beam insert Mounting bracket assembly 2mm High performance driving lights with weather proof black metal housing Supplied with protective cover, Part No W 8114 Protective cover 8135 Clear protective cover 84 Two point fixing bracket set Pencil beam insert Spread beam insert Retaining rim Rim clip set Rim - Black Pencil Beam Spread Beam mm 54mm 198mm Mounting bracket assembly 124mm Pencil Beam Spread Beam mm

7 Hella Driving Light Hella Driving Light Rallye 1 Series - Halogen W Pencil Beam Driving Light W Spread Beam Driving Light Comet 45 Series - Halogen W Driving Light - Single 5646/1 1W Driving Light - Kit Supplied with protective cover, Part No W / High beam headlight only 8118 Protective cover 8134 Clear protective cover 84 Two point fixing bracket set Pencil beam insert with globe holder Spread beam Insert with globe holder Mounting assembly with cross bolt, nut and washer Body assembly Globe holder Pencil Beam mm 88mm 214mm 161mm 6mm 9mm 114mm 18mm Rectangular 16 x 9mm driving light Supplied with protective cover, Part No Kit Contains 2 x Comet 45 driving lights fitted with 1W globes 2 x protective covers and complete wiring kit 55/1W / High beam headlight - Applies to 55W and 7W globes only 8123 Protective cover 8136 Clear protective cover Driving light insert Mounting bracket assembly Body Assembly Comet 5 Series - Halogen Spread Beam W Driving Light - Single 5642/1 1W Driving Light - Kit Round 16mm driving light Supplied with protective cover, Part No Kit Contains 2 x Comet 5 driving light fitted with 1W globes 2 x protective covers, Part No and all parts required for installation 55/1W 162mm 66mm 174mm / High beam headlight - Applies to 55W and 7W globes only 8121 Protective cover 8137 Clear protective cover Driving light insert 18mm Mounting bracket assembly Body Assembly Hella Driving Light Hella Driving Light 242mm 92mm Jumbo 22 Series - Halogen W Driving Light - Single Rectangular 24 x 13mm driving light Supplied with protective cover, Part No W / High beam headlight - Applies to 55W and 7W globes only 8124 Protective cover 8139 Clear protective cover Driving light insert Retaining rim black 195mm 85mm 181 Series - Halogen W Driving Light - Single 5633/1 1W Driving Light - Kit Rectangular 195 x 96mm driving light Supplied with protective cover, Part No Kit Contains 2 x 181 Series driving light fitted with 1W globes 2 x protective covers, Part No and all parts required for installation 55/1W / High beam headlight 8116 Protective cover 8133 Clear protective cover Driving light insert Body assembly 3mm 133mm 166mm Series - Halogen W Driving Light - Single 5623/1 1W Driving Light - Kit Round 165mm driving light Supplied with protective cover, Part No. 816 Kit Contains 2 x 16 Series driving light fitted with 1W globes 2 x protective covers, Part No. 816 and all parts required for installation 55/1W 2mm 96mm 119mm Mounting bracket assembly Series - Halogen 56/1 1W Driving Light - Kit Round 146mm driving light Supplied with protective cover, Part No Kit Contains 2 x driving lights fitted with 1W globes, 2 x protective covers, Part No and all parts required for installation 55/1W 8112 Protective cover 165mm 67mm 183mm 2mm 816 Protective cover 8132 Clear protective cover Driving light insert Mounting bracket assembly Body assembly 3 146mm 67mm 23mm Clear protective cover Driving light insert Body assembly Mounting bracket Assembly

8 Hella Driving Light & Narva Light Kits Narva Driving Lights Rig 22 Series - Halogen or 24V 1W Pencil Beam Search Light Ultima 175 Pencil Beam Driving Light Kit - Halogen W Ultima 175 Pencil Beam Driving Light Kit High output, high quality searchlight versatile for many field applications. Globe not included. Uses 1 x H3 1W or 1 x H3 24V 1W 12 /24V 1W 87 Single bolt mounting post Amber acrylic protective lens Clear acrylic protective lens Lens and gasket Lens retaining spring mm 165mm mm 81mm 12mm 181mm Round driving light 1W 46/ Kit Contains x Pencil beam driving light 7229BL x 12 Volt H3 1W globes 72386BL 1 x Relay 644BL 1 x Toggle switch x Pair of spacers 1 x Terminal and wiring pack Ultima 175 Blue Combination Driving Light Kit - Halogen 7166BE 1W Ultima 175 Blue Combination Driving Light Kit Round 1W 46/ Kit Contains 71637BE 1 x Broad beam driving light 71647BE 1 x Pencil beam driving light 7229BL x 12 Volt H3 1W globes 72386BL 1 x Relay 644BL 1 x Toggle switch x Pair of mounting spacers 1 x Terminal and wiring pack 81mm 12mm 181mm 81mm 12mm 181mm Ultima 175 Combination Driving Light Kit - Halogen W Ultima 175 Combination Driving Light Kit Round combination driving light 1W / Kit Contains x Broad beam driving light x Pencil beam driving light 7229BL x 12 Volt H3 1W globes 72386BL 1 x Relay 644BL 1 x Toggle switch x Pair of spacers 1 x Terminal and wiring pack Narva Driving Lights Narva Driving Lights Ultima 2 HID Combination Driving Light Kit 717HID 717HID-24 35W Driving Light Kit 24V 35W Driving Light Kit Ultima 2 Combination Driving Light Kit - Halogen 717 1W Ultima 2 Combination Driving Lamp Kit 12/24V Features Gen5 Ballast and D1 HID Globe 35W Round 2mm 1W 3932 Kit Contains 71677HID 1 x Pencil Beam Driving light with fitted HID lead 71667HID 72211BL 1 x Broad beam driving light with fitted HID lead x Fitted 12 / 24 Volt D1S 35W globes x 12 Volt Gen 5 Ballasts x Wiring harness with switch and relay x Pairs of mounting spacers x Optional black glare shields 2mm 15mm 235mm 2mm 15mm 235mm Kit Contains x Broad beam driving light fitted with 12 Volt globe x Pencil beam driving light fitted with 12 Volt globe 72211BL x Fitted 12 Volt H1 1W globes x Wiring harness with switch and relay x Pairs of mounting spacers Pre-wired waterproof connector Ultima 2 Pencil Beam Driving Light Kit - Halogen Ultima 2 Blue Combination Driving Light Kit - Halogen W Pencil Beam Driving Light Kit Round 2mm 12W 717BE 1W Ultima 2 Blue Combination Driving Lamp Round 2mm blue combination driving light 1V 2 x Driving lamps with fitted globes and pre-wired Kit Contains waterproof connectors 72211BL x Fitted 12 Volt H1 1W globes 744 Wiring harness with switch and relay x Pairs of mounting spacers 2 x Pre-wired waterproof connectors 2mm 15mm 235mm 2mm 15mm 235mm 1W Kit Contains 71667BE 1 x Broad beam driving light fitted with 12 Volt Globe 71677BE 1 x Pencil beam driving light fitted with 12 Volt Globe 72211BL 2 x See Through Lens Protectors x Fitted 12 Volt H1 1W globes x Wiring Harness with Switch and Relay x Pairs of mounting spacers 2 x Pre-wired waterproof connector

9 Narva Driving Lights Narva Driving Lights / Daytime Running Lights Maxim 15 Driving Light Kit - Halogen W Maxim 15 Driving Lamp Kit Taurus Midnight Black Bull Light - Halogen W Taurus Midnight Black Bull Light Round 15mm 1W Round 23mm Pencil beam Robust Satin Black powder coated metal housing 1W 46/ Kit Contains x Driving lights 7222BL x 12 Volt H3 1W globes x Relay x Toggle switch 1 x Terminal and wiring pack 15mm 65mm 17mm 23mm 315mm Kit Contains Volt H1 1W globe see through lens protector mm allen key and key ring Maxim 18/85 Driving Light Kit - Halogen Round Daytime Running Light Kit W Maxim 18/85 Driving Light Kit Rectangle 18 x 85mm High performance s and high sheen metallised free form (FF) reflectors Robust die-cast aluminium housing with cooling fins 9-33V <5W 1W / Kit Contains x Driving lights 7224BL x 12 Volt H3 1W globes x Relay x Toggle switch 1 x Terminal and wiring pack 11mm 18mm 68mm 5mm 86mm 9mm 85mm 66mm 9mm / Daytime running light Kit Contains 567LH and 567RH lamps Pre-assembled professional wiring harness, including relay and waterproof AMP plug 567LH Round DRL left hand side 567RH Round DRL right hand side Daytime Running Lights DRL & Semi-Sealed Beam Inserts 568 Rectangular Daytime Running Light Kit - 3 High performance s and high sheen metallised free form (FF) reflectors Robust die-cast aluminium housing with cooling fins Multi Volt (9-33VDC) 5W / 72mm 18mm 169mm 52mm 163mm 35mm 12824WX1 Daytime Running Lights - 8 High Power Philips Luxeon s. Ultra Slim Design and click-on system & wiring. 6W 76/ Kit Contains 2 x lamps Pre-assembled professional wiring harness Relay AMP plug 568LRH Rectangular Led DRL Light single unit 561 Dayline Daytime Running Light Kit mm 46mm DAYTIME LIGHTS DRL & SEMI-SEA INSERT 19mm 141 Halogen High Beam Insert High beam insert with sealing boot Dimensions 165 x 1mm High performance s and high sheen metallised free form (FF) reflectors Robust die-cast aluminium housing with cooling fins 7W / 49/ Front position light 561LH dayline DRL left hand side DC 561RH dayline DRL right hand side DC 216mm 156mm 31mm 36mm 1282WX1 Daytime Running Lights - 4 High Power Philips Luxeon s. Ultra Compact Design with easy fit bracket. Easy click on installation. 5W 76/ 126mm 28mm 23mm 165mm 1mm H1 (C15) Globes to Suit 24V H1 (C247) / Compliant 165mm 142 Halogen High / Low Beam Insert High/low beam insert Includes sealing boot Dimensions 165 x 1mm Globes to Suit H4 globes / Compliant 1mm

10 Semi-Sealed Beam Inserts Headlight Inserts & Conversions 143 Halogen High / Low Beam Insert To suit H4 and T4W globes With front position light globe holder, and sealing boot 156 Halogen High / Low Beam Insert To suit H4 High / low beam insert with front position light aperture and sealing boot Dimensions 2 x 142mm Globes to Suit H4 1572, / and 49/ Compliant 144 Halogen High / Low Beam Insert 2mm 142mm SEMI-SEA INSERTS INSERTS & CONVERSIONS 178mm 88mm Dimensions : 178mm 1594, / and 49/ Compliant 158 Halogen High / Low Beam Insert with Position Light Globe Holder To suit H4 and T4W globes With front position light globe holder, and sealing boot Dimensions 165 x 1mm Globes to Suit H4 1573, / and 49/ Compliant 165mm 1mm 178mm 88mm : 178mm To suit H4 and T4W globe High low / beam insert with front position light globe holder, and sealing boot Dimensions : 178mm 1596, / and 49/ Compliant 155 Halogen High / Low Beam Insert To suit H4 and T4W globes High / low beam insert with front position light globe holder, and sealing boot Suitable for dual headlight systems Dimensions : 146mm Globes to Suit H mm 8mm 17mm 1mm 116 Universal Headlight Assembly To suit 178mm halogen and sealed beams and inserts. Suits universal OE applications. Complete with adjusting mechanism for vertical an horizontal alignment Headlight Inserts & Conversions Sealed Beams / Forward & Side Lighting 724 High / Low Headlamp Conversion Kit : 178mm To suit H4 globes 55/1W Kit Contains x Head lamp inserts 178mm 146mm ACX2121 Terminals Sealed High / Flood : 146mm 8W 2 lugs x H4 1/55W globes 2 x Dust covers 727 High / Low Beam Headlight Insert with Park Light Globe Option INSERTS & CONVERSIONS SEA BEAMS HRK1 Kit Contains Phillips Headlight Restoration Kit 6 Easy to follow steps Unique UV coating for protection Once only treatment needed Restore up to 4 headlights per kit (2 cars) Rubber gloves, all cleaners, sandpaper, polish, polishing cloth, UV resurface coating, detailed instruction sheet 165 X 1mm To suit H4 globes High / low beam headlight insert with park light globe option To suit vehicles fitted with sealed and semi-sealed beams Park light globe not included Dimensions 165 x 1mm 1/55W Kit Contains x Head lamp inserts x H4 1/55W globes 2 x Dust covers 165mm 1mm 95mm 78mm 78mm 29 Side Marker or Front Position Light - Red / Amber Rubber body double sided light Includes front position light function To suit insulated earth circuits lenses available Globe included - Uses 1 x 5W SV8.5 festoon Pedestal mount 15245, /1, 49/ Red Lens Red polycarbonate lens Amber lens Amber polycarbonate lens Clear lens ACX217 Sealed High / Low Beam : 114mm 4/4W Terminals 2 Lug Terminals 114mm 229 Side Marker Light 12 Volt - Red / Amber 12 Volt Globe included - Uses 1 x 5W SV8.5 festoon ACX212 Sealed High / Spot : 146mm 146mm 121mm 35mm 65mm 45/ Lens Terminals 15W 2 Terminals

11 Forward & Side Lighting Forward & Side Lighting 2142 Front Direction and Supplementary Side Direction Indicator Single contact globe holder Globe not included - Uses 1 x 21W BA15s Indicator globe 15318, 1523, 362 6/: Cat 1 and 6/: Cat 5, 6/:Cat 5 6/:Cat 6 Spare Lens Parts 185mm 262mm 215 Front Direction and Supplementary Side Direction Indicator Wrap around front direction indicator light Suitable for insulated earth circuits Globes not included - Uses 1 x 21W BA15s indicator globe Flush mount 15172, 763 6/: Cat 1 and 6/: Cat 5, 49/ 23 Supplementary Side Direction Indicator 65mm 65mm FORWARD & SIDE FORWARD & SIDE 55mm 134mm 8711 Side Marker Light with In Built Retro Reflector - Amber Supplementary Side Direction Indicator Globes not included - Uses 1 x 5W SV8.5 Festoon /: Cat Lens 121mm 35mm 3mm 42mm Approved Amber side marker Globes not included - Use 1 x W2.1 x 9.5d 3W T1mm wedge Flush mount 26645, /, 74/ Plug & Lead Gasket Lens & Housing 65mm 114mm 2117 Supplementary Side Direction Indicator or Front End Outline Light 8632 Side Direction Indicator Light - Amber Supplementary Side Direction Indicator or Front End Outline Light Globes not included - Uses 1 x 5W SV8.5 festoon /: Cat 5 49/ 83mm 37mm Supplementary Side Direction Indicator or Front End Outline Light Globes not included - Uses 2 x BA9s globes / Cat Lens 42mm 52mm 28mm 11mm 863 Lens Forward & Side Lighting Rear Lighting 8728 Front Direction Indicator and Front Position Light - Clear Screw on lens Globes not included - Use 1 x BAU15s 21W amber indicator globe and 1 x (11 x 36mm) SV8.5-8 T11mm festoon / Cat1 49/ 45mm 45mm 28mm 2397 Combination Light - In Built Retro Reflector 12 Volt Stop / rear position / rear direction indicator light Suitable for insulated earth circuits Shallow body 12 Volt Globes included - Rear position: 1 x 5W SV8.5 festoon Stop / rear direction indicator 2 x 21W SV8-5 festoon Lens 158, 15261, External Cabin or Front End Outline Marker Light - Amber 81mm FORWARD & SIDE REAR 47mm 1mm 6/:Cat 2a 47/ 49/ Spare Lens Parts Lens gasket 241 Stop / Rear Position / Rear Direction Indicator / Licence Plate / Reversing Light Replaceable lens Globe not included - Use 1 x BA15s 1W park globe 1545, /, 49/ Lens 5mm 16mm 28mm 75mm 1mm Deep bodied light with rubber mounted bayonet globe holders Suitable for insulated earth circuits Globes not included - Uses stop / rear position / licence plate: 1 x 21/5W Lens Lens gasket 8631 Front End Outline Marker and Front Position Side Light - Clear 2422 Designline Double Combination Light - In Built Retro Reflector 12 Volt Styled lens 2 globe side position light Globes not included - Use 2 x BA9s 4W T8.5mm / Lens 52mm 28mm 11mm 41mm 53mm 133mm Stop / rear position / rear direction indicator light Suitable for insulated earth circuits 12 Volt Globes included - Uses stop / rear position: 1 x 21 / 5W BAY15d Stop / tail globe rear direction indicator 1 x 21W BA15S indicator globe 1532, 15323, /:Cat 2a, 47/, 49/ Spare Amber Parts lens Red lens Lens gasket Single globe holder 12 Volt Double contact globe holder 12 Volt

12 Rear Lighting Rear Lighting 867 Rear Stop / Tail, Direction Indicator Light with In Built Retro Reflector and BC Globe Holder 8646 Rear Stop / Tail, Direction Indicator Light with Licence Plate Option approved multi purpose rear combination light Globes not included Use 1 x BA15s 5W Park globe and 2 x BA15s 21W globes Blister pack includes globes, Part No. 867BL 21721, 21723, / cat2a 47/ 49/ Spare 8672 Globe Parts holder indicator 8675 Lens 8675BL Lens blister pack 8671 Rear Stop / Tail, Direction Indicator Light. Reversing Light with In Built Retro Reflector and BC Globe Holder 1mm 275mm 58mm REAR REAR 13mm 18mm 52mm Blister pack includes globes, Part No. 8646BL / Cat2a 48/ 49/ Spare Lens Parts Volt Sealed Rear Direction Indicator Light Kit with Vinyl Grommet - Amber approved multi purpose rear combination light with reverse Globes not included - Use 1 x BA15d 21/5W stop tail globe and 2 x BA15s 21W globes Blister pack includes globes, Part No. 8671BL 21727, 21728, 21729, / 6/ cat2a 47/ 49/ Spare 8672 Globe holder Parts indicator Globe holder stop / tail Lens 86715BL Lens blister pack 1mm 275mm 58mm 16mm 49mm 112mm Model 45 Series Thermoplastic rubber body Horizontal: 15571, Vertical: / Cat 2a Horizontal and Vertical Kit Contains x 12 Volt Sealed rear direction indicator light x Vinyl grommet 91mm x Plug and leads 14.2mm 863 Rear Stop / Tail, Direction Indicator Light with Licence Plate Option and In Built Retro Reflector Volt Sealed Rear Direction Indicator Light Kit with Vinyl Grommet - Amber Low profile combination trailer light Globes not included - Use 1 x (11 x 36mm) SV W festoon Blister pack includes globes, Part No. 863BL Model 45 Series Thermoplastic rubber body Horizontal: 1551, Vertical: / Cat 2a Horizontal and Vertical 6/ Cat2a 47/ 48/ 49/ Spare 8635 Lens Parts 8635BL Lens blister pack 17mm 42mm 16mm 112mm Kit Contains x 24 Volt Sealed rear direction indicator light 91mm x Vinyl grommet x Plug and leads 17mm 49mm 14.2mm Rear Lighting Rear Lighting Volt Sealed Rear Stop / Tail Light Kit with Vinyl Grommet - Red Volt Sealed Reversing Light Kit with In Built Retro Reflector and Vinyl Grommet Model 45 Series Thermoplastic rubber body Horizontal: 15512, Vertical: / Horizontal and Vertical x 12 Volt Kit Contains Sealed rear stop / tail light x Vinyl grommet x Plug and leads Volt Sealed Rear Stop / Tail Light Kit with Vinyl Grommet - Red 16mm 49mm 112mm 91mm 14.2mm REAR REAR 16mm 49mm 112mm 91mm 14.2mm Model 45 series Thermoplastic rubber body / 47/ Vertical only x 24 Volt Sealed reversing light x Vinyl grommet x Plug and leads 53 Licence Plate Light - Black 12 Volt Model 45 Series Thermoplastic rubber body Horizontal: 15515, Vertical: / Horizontal and Vertical x 24 Volt Kit Contains Sealed rear stop / tail light x Vinyl grommet x Plug and leads 16mm 112mm 91mm 12mm 55mm 12 Volt Globe included - Use 1 x 1W BA15s park globe / 49mm 14.2mm 57mm Volt Sealed Reversing Light Kit with In-built Retro Reflector and Vinyl Grommet Model 45 series Thermoplastic rubber body / 47/ Vertical only x 12 Kit Contains Volt Sealed reversing light x Vinyl grommet x Plug and leads 16mm 49mm 112mm 91mm 14.2mm

13 Reflectors Safety Triangles / Workshop Lights Round Reflectors 1 Pack Colour Mount LRX161 Amber 6mm Centre screw fix / Safety Triangles / Workshop Lights 29 Safety Triangle - Double Sided LRX162 Clear 6mm Centre screw fix / LRX163 Red 6mm Centre screw fix / LRX181 Amber 8mm Centre screw fix / LRX182 Clear 8mm Centre screw fix / Double sided triangular warning device. Designed to withstand winds of 48kph. Complete with protective carrying case that acts as base during use. Complies with Australian standard AS 379B. LRX183 Red 8mm Centre screw fix 16 47/ LRX184 Green 8mm Centre screw fix Rectangle Reflectors 1 Pack Colour Dimensions Mount 6mm 8mm REFLECTORS SAFETY TRIANGLES 14mm 842 Safety Triangle Set (3) Non-skid rubber feet Placement instructions Precision retro tooling No tools required to set up Complies with AS379 LRX21271 Amber 127 x 48mm Screw fix / LRX21272 Clear 127 x 48mm Screw fix / LRX21273 Red 127 x 48mm Screw fix / LRX211 Amber 1 x 45mm Welded back / self adhesive LRX212 Clear 1 x 45mm Welded back / self adhesive LRX213 Red 1 x 45mm Welded back / self adhesive LRX2751 Amber 75 x 46mm Self adhesive / 127mm 1mm 48mm 712 See Ezy 24 Volt Fluorescent Inspection Light Versatile spring steel hanging hook Ultra bright 9 lumens Rubber body resistant to petrol and oil Low heat output, safe for use around fuel and chemicals Complies with AS/NZS 3118, approval no. N Volt 11W Fluorescent tube LRX2752 Clear 75 x 46mm Self adhesive / LRX2753 Red 75 x 46mm Self adhesive / LRX271 Amber 7 x 2mm Welded back / self adhesive LRX272 Clear 7 x 2mm Welded back / self adhesive LRX273 Red 7 x 2mm Welded back / self adhesive 75mm 7mm 45mm 46mm 2mm 7121 See Ezy 12 Volt Fluorescent Inspection Light Versatile spring steel hanging hook Ultra bright 8 lumens Rubber body resistant to petrol and oil 1A low current draw Fluorescent tube Interior Lighting Interior Lighting / Headlight Connectors Interior Lighting LIX1115 LIX1215 Interior Opal Series Fluorescent Light 8mA 9W Controlled Fluorescent Interior Opal Series Fluorescent Light 24V 4mA 9W Controlled Fluorescent 62mm 36mm mm Fluorescent Interior Light - Tough, impact resistant housing with clear, patterned lens Integrated two-stage switch for two light levels 2 x 8W 4mm mm Fluorescent Interior Light V 355mm Fluorescent Interior Light - 24V 22mm 115mm INTERIOR INTERIOR 55mm 2633 Halogen Map Reading Light 195mm Arm 2636 Halogen Map Reading Light 5mm Arm High quality fluorescent interior light with impact resistant lens ON / OFF switch and compact fluorescent tube. Fully suppressed Suppression Class K in accordance with VDE 871 Class B and VDE 879 Part 3 55mA 11W 355mm 35mm 5mm 46mm 195mm / 5mm 4mm Flexible black arm Intergrated on/off rocker switch Fitted with clear diffuser lens, for glare-free illumination 5W 195mm 59mm mm Fluorescent Interior Light V 44mm Fluorescent Interior Light - 24V High quality fluorescent interior light with impact resistant lens ON / OFF switch and compact fluorescent tube Fully suppressed Suppression Class K in accordance with VDE 871 Class B and VDE 879 Part 3 39mA 8W 44mm mm 35mm 59mm ACX244 Note Quick Fit Driving Light Wiring Harness Kit Automatically detects positive or negative switching headlight systems Plug and play H4 adaptor plugs that can be removed to suit the other head light connector types Kit contains toggle switch (), relay holder pre-wired, fuse holder with 2A fuse, positive / negative circuit built into harness, harness cable length suitable for most passenger vehicles and 4X4s, detailed fitting instructions For 24V applications use ACX1942R relay and ACX3912 drop resistor for switch

14 Headlight Connectors Headlight Connectors Headlight Connectors ACX272 Sealed Beam Headlight Connector Pre Wired Single ACX272/1 Sealed Beam Headlight Connector Pre Wired Pkt 1 Three pole headlight type, pre-wired with thermoplastic wire leads Terminated at plated bronze contacts ACX2718 HB4 Headlight Connector Designed specially for HB4 globes Two pin Heavy gauge wire Complete with weather seal ACX2721 Sealed Beam Headlight Connector Unassembled Single ACX2721/1 Sealed Beam Headlight Connector Unassembled Pkt 1 Three pole headlight type, moulded plastic insulator with three bronze contacts Housing is a high temperature resistant plastic d unassembled HEADLIGHT DRIVING CONNECT HEADLIGHT CONNECT ACX81 H1 / H3 Headlight Connector Heavy duty connector uses urea formaldehyde based material housing to resist high temperature heat up to 3 C To suit H1 or H3 globes ACX2722 Sealed Beam Headlight Connector Pre Wired Single ACX2722/1 Sealed Beam Headlight Connector Pre Wired Pkt 1 Three pole headlight type, pre-wired with thermoplastic wire leads Plated bronze contacts High temperature resistant moulded plastic connector ACX2729 HB1 Headlight Connector Designed specially for HB1 globes Three pin Heavy gauge wire Complete with weather seal ACX83 ACX84 ACX85 H4 Flag Type Headlight Connector Heavy duty connector uses urea formaldehyde based material housing to resist high temperature heat up to 3 C To suit H4 globes H7 Headlight Connector Heavy duty connector uses urea formaldehyde based material housing to resist high temperature heat up to 3 C To suit H7 globes H7 9 Headlight Connector ACX2719 HB3 Headlight Connector Designed specially for HB3 globes Two pin Heavy gauge wire Complete with weather seal Heavy duty connector uses urea formaldehyde based material housing to resist high temperature heat up to 3 C To suit H7 globes Headlight Connectors Headlight Connectors & Globe Holders Headlight Connectors (continued) ACX92 H9 Connector To suit H9 globes ACX86 HB1 / HB5 (94 / 97) Headlight Connector Heavy duty connector uses urea formaldehyde based material housing to resist high temperature heat up to 3 C To suit HB1 or HB5 globes ACX87 HB3 (95) Headlight Connector Heavy duty connector uses urea formaldehyde based material housing to resist high temperature heat up to 3 C To suit HB3 globes HEADLIGHT CONNECT GLOBE HOLDERS ACX / 889 Connector To suit 881 / 889 fog series globes ACX89 HB4 (96) Headlight Connector Heavy duty connector uses urea formaldehyde based material housing to resist high temperature heat up to 3 C To suit HB4 globes ACX82BL H4 Headlight Connector 312 Type Heavy duty connector uses urea formaldehyde based material housing to resist high temperatures up to 3 C To suit H4 globes Globe Holders ACX9 H13 (98) Connector To suit H13 globes ACX94 Wedge Base Globe Holder To suit T1 and T15MM wedge tube globes ACX91 H8 / H11 Connector To suit H8 or H11 globes ACX2465BL Globe Holder To suit Ford stop and tail light applications Uses BA15d base globes Twist locks into a 26mm diameter hole Replaces: Ford D3AZ-1341B

15 Globe Holders Globe Holders Globe Holders (continued) Globe Holders (continued) ACX2466BL Globe Holder To suit Ford reverse and rear light applications Uses BA15s base globes Twist locks into a 26mm diameter hole Replaces: Ford D1AZ-1341B and D3AZ-1341A ACX2472BL Globe Holder Insert Dual contact globe holder insert with spring To suit BA15d base globes and holders 15mm Pad diameter with guide tags Twin pack ACX2467BL Globe Holder To suit Holden stop and tail light applications Uses BA15d base globes 3 Colour coded wires Twist locks into a 26mm diameter hole Replaces: GM GLOBE HOLDERS ACX2468BL Globe Holder Universal type single contact globe holder To suit BA15s base globes Insulated base ACX247BL Globe Holder To suit Holden Commodore stop and tail applications Uses BA15d base globes Twist locks into a 28mm diameter hole Replaces: GM and ACX2471BL Globe Holder Insert Single contact globe holder insert with spring To suit BA15s base globes and holders 15mm Pad diameter Twin pack GLOBE HOLDERS ACX2476BL Globe Holder Insert To suit Holden reverse and rear light applications Uses BA15s base globes Press fits into a 28.5mm diameter hole Replaces: GM 893 and ACX2478BL Globe Holder - Ford To suit Indicator EF - AU Falcon Uses BA15S Twist fit ACX2479BL Globe Holder - Ford To suit stop tail EF - AU Falcon Uses BA15D Twist fit