SUMMER SPECIALS B BRAKINGRAIC K ITNGS O

Transcription

1 SUMMER SPECIALS July - September 2014 PAGE 3 PAGE 5 DIAGNOSTICBRAKING BRAKING PAGE 8 PAGE 7 SUSPENSION BRAKING Terms & Conditions PAGE 10 All prices subject to VAT unless otherwise stated. All offers are subject to availability & while stocks last. All pictures shown are for illustration purposes only. Whilst every possible care has been taken to ensure the information within this brochure was accurate at the time of going to print, Alba Diagnostics cannot accept any liability for any possible errors. Offers last until Tuesday 30th September PAGE 4 Distributer Stamp DIAGNOSTIC

2 Diagnostic GLOW PLUG IMPACT SOCKET SET Part No. ALB40208 Torque-limited impact wrench set designed for removal of diesel engine glow plugs Four position torque limiter - 10, 20, 30 & 40Nm - for controlled torque vibration Uses controlled impact torque to create vibration in order to loosen seized glow plugs Removes the risk of breaking glow plugs, or damaging the cylinder head Can also be used for removal of other seized threaded fasteners or plugs up to 12mm Includes: Torque-limited impact wrench 1/4 sq dr; Impact Glow Plug Sockets - 8, 9, 10, 11, 12mm; Impact Extensions - 50, 100mm; Impact Universal Joint GLOW PLUG THREAD REPAIR KIT Part No. ALB30997 Re-threading kit for 8, 10 & 12mm glow plugs Replaceable consumable items available Suitable for alloy cylinder head Tap size: M8 x 1.0, M10 x 1.0; M10 X 1.25, M12 X 1.0; M12 X 1.25, M14 X 1.25 Coil sizes: M8 x 1.0, M10 x 1.0; M10 X 1.0, M12 X 1.0; M12 X 1.25, M14 X 1.25 GLOW PLUG TESTER MULTI-VOLTAGE Part No. ALB30913 Works on all types of glow plugs, any voltage: 4.4v/5v/7v/8.5v/10v/11v, plus many more Measures actual glow plug resistance for evaluation of the plug specification Displays open & short circuit Internal 9 volt battery & low warning indicator Auto shut-off when not in use Protected with oil-resistant rubber boot EGR & SOLENOID VALVE TESTER AND CLEANER Part No. ALB40165 The Alba EGR & Solenoid Valve Tester helps the technician test the integrity of EGR valves & other 12v solenoids & helps in the cleaning process for carbonised EGR valves. Due to the tool's variable frequency, EGR valves can be cycled in low-frequency mode, to ensure correct operation or to clean during the cyclic mode. In high frequency mode, the valve can be opened progressively, allowing more efficient manual cleaning. Because of the variable frequency feature, the tool can also be used to test a variety of other 12v solenoid type valves (vacuum solenoids, boost pressure control valves & actuators, petrol injectors, carbon canister filters, etc) 12v operated Rotary frequency control Kit Contents: EGR & Solenoid Valve Tester Universal terminals for 1.5mm valve connection pins Before Universal terminals for 2.8mm valve connection pins Dedicated 6-pin connector for Pierburg/Renault/GM/Nissan & Volvo Dedicated 5-pin connector for GM/Opel applications Dedicated 6-pin connector for Ford/Landrover & Jaguar applications After 2

3 Diagnostic RELAY TESTER Part No. ALB30933 Quickly tests 4 & 5 pin electro-mechanical relays used on most cars Checks for consistent functioning of relay contacts Automatically indicates test results with a series of red & green performance lights 12v power supply required RELAY TESTER MASTER SET Part No. ALB40211 Relay Tester for 4/5 pin relays (ALB30933) Supplied with additional 2 pcs adaptor set (ALB40212) Supplied with 3 pcs set of adaptors for shielded relays (ALB40213) 3 PCS RELAY ADAPTOR SET Part No. ALB40213 Set of three adaptors which allow your existing Relay Tester to test Shielded Relays The Shielded Relay adaptor plugs into the same pin sockets as the normal relay & the Shielded Relay then plugs into the adaptor Fits in any of the three 4 & 5 pin sockets on your Relay Tester 2 PCS RELAY ADAPTOR SET Part No. ALB40212 Set of two adaptors to increase the range coverage of your existing Relay Tester The adaptor plugs into your Relay Tester & the relay to be tested then plugs into the appropriate adaptor For 4 & 5 pin Relays as commonly used for fuel pumps & other powered components Special Combo offer ALB40214 on alb40213 & alb40212 AMP HOUND (CURRENT DETECTOR) Part No. ALB40210 Specially designed to significantly reduce the amount of time required to determine the amount of current in a fused circuit No need to remove the fuse Check the whole fuse box in seconds Find parasitic drains as low as 0.005amp Audible tone lets you know when you are touching a fuse no guesswork Tests all common automotive fuse types Low Profile, Mini, ATO, Maxi Operating range: volts 6v/12v/24v; amps 5mA to 50A 3

4 Diagnostic ELECTRIC COOLING SYSYEM TESTER (12V) Part No. ALB30924A One-man operation Pressurised Leak testing of the full cooling system (hoses, clamps, pump & radiator) Automatically regulated 12V electric compressor, works off car battery Supplied with a set of 3 unique expanding bungs to fit to expansion tanks on majority of European & Asian applications 1.2 bar pressure limiter 0 to 2.5 bar pressure gauge Hose: 2m Long Power cord: 2m Long Weight: 3Kg DELUXE COOLING SYSTEM & CAP PRESSURE TESTER Part No. ALB70889 Check the System Pressure - Unique inflatable bladder sealing system provides universal coverage for cars & light commercials no individual adaptors required - Suitable for system neck diameters up to 60mm Check the Cap Pressure - Six unique double-ended adaptors for testing the most common automotive pressure caps Helps to locate leaks from: Head Gaskets, Radiator & Heater cores, Water Pumps & Hoses, Core Plugs & Engine Blocks COOLING SYSTEM TESTER Part No. ALB30923PR Unique universal design pressure test kit for cooling systems Uses expanding rubber adapters to create air-tight seal under neck of expansion bottle Fits all applications with neck diameters 18-44mm Can also be used on popular applications with traditional bayonet fitting caps Visual display pressure Loss to indicate the pressure Leaks Will also indicate defective head gasket leaks ALB30608AB Refractometer HEAVY DUTY FLEXIBLE HOSE PLIERS Part No. ALB30883 Double gear Lock Lever with wide deep gears for secure Locking Cable adjuster & multiple gear-lock provide accurate & secure locking for any clamp position within range Allows for removal of plastic & metal self-tightening hose clamps with diameters of 18mm to 54mm AIRVAC COOLING SYSTEM REFILLER Part No. ALB30771 Fast and efficient refilling system with universal adapter Fits most radiator & header tanks due to unique cone adapter Integrated vacuum gauge Eliminates bleeding, coolant spillage & wastage Operates on shop air to generate full system vacuum & eliminate airlocks 4

5 Diagnostic SMART EAR Part No. STE91927 Unique & Innovative New Concept - Transform your Smartphone into a State-of-the-art Diagnostic Sound & Vibration Detection Device Diagnose the location of unwanted squeaks, rattles & noises from defective components Hardware kit consists of: Sensor Clamp c/w 16' cable; Sound Wand (2pce) c/w 4' cable; Aluminium Probe c/w rubber connector; Stereo Ear Plugs; Dual Port Dongle The FREE APP provides the following software features for display on your Smartphone*; Sound level reading displays average, peak & real-time values - analogue & digital, Analogue display as Meter or Wave-Form/ Digital display as Numeric or Bar Graph, selectable Audio Sound or Vibration input modes, Equalizer mode which can help drown out background noises, Set your own Sampling Rate, Background Sound off-set, Reset Values, Master Volume Control, User information guide; includes useful information about sounds & permissible noise level exposure & sound level comparison reference chart Phone Not Included Specially designed hardware kit for use with your Smartphone* Download the FREE APP - * versions available for both iphone & Android phones SOUNDSONIC Part No. ALB30670 SoundSonic is a unique diagnostic tool using non-intrusive ultrasound to inspect & help isolate difficult to find sounds which are non-audible to the human ear LED bar graph indicates intensity & direction of sound Helps to accurately pinpoint problem areas earlier in the failure cycle, due to the detection of ultrasound Not affected by ambient noise eg radios, voices, wind & traffic noise WIRELESS COMBO SOUND/VIBRATION TESTER Part No. ALB40044 Versatile electronic listening tool which allows technician to listen to: Gears, Bearings, Suspension during a road test, so that problems can be more accurately pin-pointed. There are 4 extremely sensitive microphones/clamps that can be attached adjacent to many difficult to diagnose vehicle parts. Use For: Road Test Diagnosis Fuel Injectors Steering, Suspension & Bearings AMPS CLAMP Part No. ALB30828 CURRENT CLAMP 400AMPS Compatible with graphing meters, scopes & DMMs Can be used for testing starting & charging systems Works with digital multimeters (DMMs) Auto power off & low battery indication Test Range: AC Amps 0-40A, 400A (resolution 0.1A) DC Amps 0-40A, 400A (resolution 0.1A) DMM C/W IR TEMP PROBE Part No. ALB30762 CAT v rated safe to use on Hybrids 48 Test Ranges & 18 Test functions - auto ranging & data hold 1 Ms Peak Min/Max function for glitch capture EST- 100 IR Thermometer with 8 to 1 distance ratio (-20 to 280 C) 5

6 Suspension HEAVY DUTY SUSPENSION WORKSTATION Part No. ALB40170 Auto levelling upper arms allows the machine to work easily on both conical & misaligned springs Cylinder made from light alloy & nylon resin with fiberglass to avoiding corrosion & oxidation Foot-pedal works only when the safety valve is closed Supplied with small & large jaws & strut vice Working pressure: min 6 bar - max 10 bar Cylinder stroke: 330 mm Compression force: 1960Kg@ 10 BAR Ideal for working on conical, side-load & heavy duty springs MERCEDES BRACKET SET (FOR ALB40170) Part No. ALB40175 Optional Accessories available, see PNEUMATIC SUSPENSION WORKSTATION Part No. ALB30898 Universal unit for disassembling & re-assembling shock absorbers in seconds Simple to operate; allows operator to work with both hands free Unique protection system; prevents any operation if not correctly positioned Robust construction; quality materials used to ensure stability & reliability Compression force: 10 BAR Suitable for cars, LCV, and 4WDs that use McPherson strut-type suspension systems, SUV, BMW X5, Mercedes ML & Volvo XC90 SHOCK ABSORBER TOOL KIT Part No. ALB30956 Comprehensive set of tools for dismantling & installing shock absorber strut assemblies Includes; 9 special sockets & 25 bit inserts for releasing strut top nuts Slotted/torx/D shape/hex male & female strut top bit inserts Also includes 5x strut nut sockets 14-27mm sockets AXIAL JOINT REMOVER Part No. ALB30944 For simple removal & replacement of the axial joint Size range 35-45mm; Length 400mm Can be used with 1/2"DR wrench or 27mm hex wrench ALB mm also available 6

7 Suspension HUB & BEARING REMOVER / INSTALLER SET (GEN 2-72,78 & 82MM) Part No. ALB40215 For the safe and quick removal & installing of GEN2 type Hub Bearings Reduces risk of damage to ABS sensor rings Specially designed centre alignment adaptor to ensure perfect alignment when re-fitting bearings Hydraulic upgrade option available Applications: VAG ( 72mm ) - Audi A1, Audi A2, Seat Cordoba, Seat Ibiza, Skoda Fabia, Skoda Roomster, VW Polo, VW Touran Ford / Volvo ( 78mm ) - Ford Focus II, Ford C-Max, Mazda 3, Volvo C30, Volvo C70, S40, V50 Ford / LR / Volvo ( 82mm ) - Mondeo 2007 on, Galaxy, S-Max 2006 on, Land Rover Freelander on, Volvo S80, V70, XC60, XC on Available Exclusively from Alba Diagnostics (In UK) SHOCK ABSORBER RETURN SPRING PULLER Part No. ALB40216 Makes life easy when working on shock absorbers with internal rebound stop springs Universal protective clamp retains the piston rod in extended position Clamp has short & long screws to cover wide range of piston diameters (12 28mm) Telescopic handle makes it easy to assemble the new piston Saves time when assembling new shock absorbers UNIVERSAL STEERING KNUCKLE SPREADER Part No. ALB30950 Used to spread the steering knuckle enables the removal & refitting of shock absorbers avoid damaging the aluminium or cast iron knuckle Suitable for steering knuckles with either a centralised or a non centralised slot Fully adjustable Available Exclusively from Alba Diagnostics (In UK) SHOCK ABSORBER PISTON CLAMP Part No. ALB40217 Universal protective clamp retains the piston rod in extended position Clamp has short & long screws to cover wide range of piston diameters (12 28mm) 7

8 Workshop Braking DIGITAL BRAKE DISC & PAD MEASURING TOOL Part No. ALB30596 Measurement Range: 0-150mm (metric & imperial) Resolution: 0.01mm Accuracy: 0.01mm Packaging: sturdy plastic case DIGITAL BRAKE DRUM MEASURING TOOL Part No. ALB30597 Measurement Range: 0-300mm (metric & imperial) Resolution: 0.01mm Accuracy: 0.01mm Packaging: sturdy plastic case DIGITAL VERNIER CALIPER Part No. ALB30598 Measurement Range: 0-150mm (metric & imperial) Resolution: 0.01mm Accuracy: 0.03mm Packaging: sturdy plastic case DIGITAL CALIPER INC BRAKE DISC MEASURING TOOL Part No. ALB40158 Digital Vernier Caliper ALB30598 with Brake Disc Measuring Tool ALB40157 Measures thickness of brake disc without having to remove the wheel Packaging: sturdy plastic case COMBO MEASURING SET Part No. ALB30801A Digital Vernier Caliper 150mm ALB30598 Digital Brake Disc Caliper 60mm ALB40029 Packaging: sturdy plastic case DIGITAL BRAKE DISC MEASURING TOOL Part No. ALB40029 Measurement Range: 0 60mm (metric & imperial) Resolution: 0.01mm Accuracy: +0.04mm LCD Display Includes serial port connection for computer interface Packaging: sturdy carry case 8 * All Digital measuring tools supplied with spare replacement battery

9 Workshop Braking DIGITAL TYRE TREAD DEPTH GAUGE Part No. ALB30586 Measurement Range: 0-25mm (metric & imperial) Tolerance:+/- 0.05mm Packaging: sturdy plastic case DIGITAL TYRE TREAD DEPTH GAUGE - MOT Part No. ALB30658 Measurement range: 0-10mm (metric & imperial) Resolution: 0.01mm Accuracy: +/- 0.01mm Packaging: Sturdy plastic case DIGITAL BRAKE MEASURING KIT Part No. ALB30605 Essential kit for all fast fit outlets, service centres & road safety checks, contains all the Digital tools you need to measure: ALB30596; Brake discs & pads ALB30597; Brake drums & shoes ALB30586; Pad thickness / tyre depth ALB30602A; Disc runout ALB30598; Vernier caliper DIAL GAUGE BRAKE DISC RUNOUT SET Part No. ALB30602A Includes analogue dial indicator Measurement Range: mm (metric & imperial) Resolution: 0.01mm Accuracy: 0.01mm BRAKE SERVICE KIT Part No. ALB40091 For measuring pad and disc thickness, and for cleaning discs & calipers: Digital brake disc measurement caliper ( 0-60mm ) Brake disc run-out gauge & magnetic base Brake lining thickness guide tool Brass Wire Brush for caliper cleaning Wheel stud & disc cleaning set EPB/SBC SERVICE TOOL Part No. ALB30916 Compatible with Ford, Mercedes, Volvo, VW & Audi Deactivate & re-activate EPB & SBC electronic brake systems Read & clear fault codes Reset ECU, warning lights & pad thickness Pad change, brake fluid change, emergency release, EPB function test & acceleration sensor test Security access to Volvo BCM * All Digital measuring tools supplied with spare replacement battery 9

10 Workshop Braking BRAKE BLEEDER WRENCH SET 3PCS WITH NON-RETURN VALVE Part No. ALB40207 Set of special socket wrenches for loosening & tightening bleed nipples 8, 10 & 11mm to cover all popular applications Silicon hose (1.2mtrs) with safety non-return valve Ideal for brake bleeding without removing the wheels BRAKE PIPE RATCHET WRENCHES WITH FLEXI HEAD SET OF 3 (8,10, 11MM) Part No. ALB40068S Ideal for use on brake pipes Flexi-head for tight areas 8, 10 & 11mm Unique ring closing design SPECIAL OFFER 8MM Part No. ALB MM Part No. ALB MM Part No. ALB40070 BREAK PAD SPREADER Part No. ALB40067 Brake pad spreader for use when servicing brakes Single handed operation Suitable for cars and light commercials Spring loaded, quick release action 5-60mm spread RATCHETING BRAKE PIPE NUT WRENCH SET 4 PCS 8-15MM Part No. ALB30884 Unique Patented ratcheting system for fast & easy removal of brake pipe nuts & inline nuts Can be opened & closed to fit around the nut completely Ideal for work on rounded, worn or even rusty nuts Flex-Head wrenches : 8-15mm BRAKE LINING GUIDE Part No. ALB30992 Ideal for quickly checking remaining life of brake linings Blade is inserted between brake disc & brake pad Red = Replace now; Yellow = Replace soon; Green = OK Size: Red 2 & 3mm; Yellow 4, 5 & 6mm; Green 8, 10 & 12mm BRAKE FLARE NUT WRENCH SET Part No. ALB40017 High quality chrome vanadium steel Sizes; 10x11mm, 13x14mm, 15x17mm Supplied in protective carry pouch 10

11 Workshop Braking WORKSHOP BRAKE PIPE FLARING KITS Designed to be used with a workshop bench vice Dial-a-size turret design for ease of use Lever cam action for quick flaring Automatic punch extraction from flare Part No. ALB30915D Produces both convex & double lap flares to SAE & DIN standard 4.75mm pipe (3/16 ) Free Professional Brake Pipe Deburring Tool With Any Kit Part No. ALB40117D Produces both convex & double lap flares to SAE & DIN standard 4.75mm pipe (3/16 ) & 6mm (1/4 ) Part No. ALB30688D Produces both convex & double lap flares to SAE & DIN standard 4.75mm pipe (3/16 ), 6mm (1/4 ), 8mm, 10mm HAND HELD BRAKE PIPE FLARING TOOL Part No. ALB40006 Patented design for producing high quality flares on the vehicle Produces 3/16 SAE flare Extremely easy to use & lightweight For mild steel, cupra nickel & copper tube Use with two ratcheting spanners (10 & 16mm) Small & compact for easy use in confined areas HAND HELD BRAKE PIPE FLARING KIT Part No. ALB30893 Patented design for producing high quality flares on the vehicle Creates SAE & DIN single & double flares (3/16 & 4.75mm) Extremely easy to use & lightweight For mild steel, cupra nickel & copper tube Use with two ratcheting spanners (10 & 16mm) PROFESSIONAL BRAKE PIPE DEBURRING TOOL Part No. ALB40125 A quality tool for ensuring brake pipes are effectively deburred before fitting Internal & External deburring capability Size range: Internal 3-12mm; External 4-14mm Suitable for copper, brass, steel & plastic pipes Ideal for brake pipe repair work on or off the vehicle 11

12 Workshop TOOL CABINET Part No. ALB40016M Internal locking mechanism Spring loaded lock to avoid snapping keys Ball bearing slides Internal rubber drawer liners Non-slip rubber top matt 2 static wheels/2 locking wheels (125x38mm - 5 x 1½ ) Overall dimensions 690 x 460 x 730mm Free Multi Storage Container with ALB40016 Tools Not Included MULTI STORAGE CONTAINER Part No. ALB clear plastic internal boxes Ideal for nuts, bolts, screws etc 3 different sized compartments secure safely to the outer carry case Clips on internal storage boxes for attaching to clothing External strap to carry case around easily WORKSHOP TROLLEY Part No. ALB30952 Quality cart for automotive maintenance applications Push handle moulded into top shelf 4" Brake Wheels x2 4" Moveable Wheels x2 Will not scratch car finish Upright aluminium alloy Dimension 575x460x900mm Self assembly Fasteners not included MAGNETIC PARTS TRAY Part No. ALB40073 Magnetic inside for securing of metal parts Adjustable to secure items in horizontal or vertical positions Magnet coated with rubber sleeve for surface protection Great for mounting on toolboxes MAGNETIC PARTS TRAY INC LED LIGHT Part No. ALB40099 Stainless steel bowl with 80mm magnet in non-marking cover Ideal for storing nuts, bolts, screws, washers & sockets during disassembly/assembly Attaches to any ferrous surface Adjustable plastic cover to secure parts in horizontal/vertical positions LED light - ideal when working in poorly illuminated area 12

13 Workshop OIL PAN/SUMP SEPARATOR & CLEANING PADS Part No. ALB30999 Breaks gasket seals on engine sumps, transmissions or any difficult to separate gasket joints Copper blade to avoid damage on gasket or oil pan connection joint surface Clean up wheel tool to clean all small spaces on cylinder head SUMP PLUG REPAIR SET 114 PCS Part No. ALB40066 Repairs sump, gearbox & differential drain plug threads Tap the damaged thread slightly oversize, then fit new drain plug & washer Suitable for most popular threads used on most cars & light commercial vehicles REMOULDABLE FUNNEL Part No. ALB40072 Drain hard-to-reach oil filters without a mess Reshape & reuse thousands of times Easy to clean OIL EXTRACTOR Part No. ALB30537 Suitable for cars, motorcycles, marine, industrial, fish tanks etc with 6.7mm dia. & 5.8mm dia. suction probes & 1.2m extension hose 6 litre capacity Simple & easy to operate Portable PLASTIC DRAIN PAN (BLACK) Part No. ALB30751 Sturdy moulded plastic 17 Litre capacity Handy spout for emptying OIL DRUM DRAIN PAN Part No. ALB30940 Sturdy moulded plastic 20 Litre capacity Built-in drain to empty directly into a drum PLASTIC DRAIN PAN (GREEN) Part No. ALB30752 Sturdy moulded plastic 17 Litre capacity Handy spout for emptying 13

14 Workshop INDUCTION HEATING SYSTEM PROPLUS Part No. ALB40190 Induction Heating System - Flameless Heat Safe - Portable - Effortless Effortless: - Fast removal of seized & rusted components, windscreens, bonded body panels, badges, trim...& much more - Flameless heat reduces the need for torches, solvents & abrasives Safe: - No mains voltage at the handset - 100% safe thermal control re-set & safety trip-out - Quick release coil connections will not come loose watts induction power (3 times the power of most induction heaters) - Compact hand control - for ease of access Foot pedal operating switch Contents: - Induction heater unit watts- with mains supply lead - Hand control with 2.5m cable - Foot pedal - 1.5m Length extension cable - Coils: 1x 22mm vertical coil, 1x 22m horizontal coil, 1x 32mm vertical coil & 1x 1m flexible rope coil - Instruction manual, - CE Approved & Manufactured in the UK Trolley Not Included Part Number: ALB40199 Other accessories also available COIL KIT Part No. ALB40195 TRACK ROD END BLOCK Part No. ALB40196 CONCENTRATOR BLOCK Part No. ALB40197 HAND PAD Part No. ALB coil 19-38mm Ideal for steering & suspension joints Ideal for windscreen removal Ideal for graphics & trim removal 14

15 OTC INDEXING PRY BAR SET Part No. OTC7175 Sizes 10", 12" and 15" Indexible to 180 for better access 14 locking positions for leverage in multiple applications Knurled handle assures a sure grip Meets or exceeds ANSI specifications for prybars HEAVY DUTY PRY BAR SET Part No. OTC8206 Made of tempered square steel that you can hit without damaging the handle - black chrome striking cap Ergonomic handle - bi-material composite for user comfort; reduces hand fatigue - black oxide polished tip Set includes: 20cm, 30cm, 45cm, 60cm, 81cm & 90cm bar shank lengths in a moulded storage tray HEAVY DUTY VALVE SPRING COMPRESSOR Part No. OTC4842 Heavy Duty tool to compress valve springs on modern engines Heavy Duty C-frame with 9" opening and a 5" throat Includes 16mm, 19mm, 23mm, 25mm, and 30mm valve spring retainer adapters Comes with 75mm & 125mm threaded extensions SERPENTINE BELT TOOL SET Part No. OTC4645 Fits tensioner pulleys with mm, 18 mm hex or 3/8" & 1/2" square drives For hard to access tensioners; there are 13 & 15mm 12- point wrenches built into the handle 13, 14 & 15mm crows foot wrenches also included BEARING RACE & SEAL DRIVER SET 10PCS Part No. OTC4507 For installation of tapered bearing races & seals without damage to the component or housing - from 4cm - 8cm Tapered side of driver is used to install races, invert the driver to the flat side to install seals Set contents: 9x driver tools; 3.97, 4.45, 4.99, 5.90, 6.27, 6.49, 7.19, 7.60, 8.01cm; 1x driver handle CIRCLIP PLIER SET 8 PCS Part No. OTC4512 For internal or external circlips/snap rings; thumbscrew permits quick conversion from internal to external use Set contents: 4x straight tip circlip pliers; 4x 90 tip circlip pliers; 1x straight tip pick; 1x 90 tip pick 15

16 Special Value AFFORDABLE - BRAKE FLUID TEST & CHANGE KIT Part No. ESSENTIAL 1 ALB1000 Boiling point tester: the only test method approved by brake & brake fluid manufacturers Accurate, reliable & repeatable results Operates off 12 volt supply, vehicles own battery Measures up to 200, suitable for use on all grades of brake fluid & racing fluids ALB560A Full fluid change can be completed by a single operator in approx. 15 minutes Portable: operates off 12v supply (vehicle battery) Internal fluid reservoir - capacity 1.25Ltrs ALB30564B Multi Vehicle Cap Kit including: European Cap Adapter, ALB592B patented multi-vehicle cap (30-85mm diameter), Bleed bottle & Syringe ALB30912 Ford Fiesta Cap Adapter, Exclusively from Alba Diagnostics Kit Available Exclusively from Alba Diagnostics Kit Contents: ALB Brake Fluid Tester ALB560AB - Pressure Brake Bleeder ALB30564B - Multi Vehicle Cap Kit ALB Ford Fiesta (42.8mm) 16 PROFFESIONAL - BRAKE FLUID TEST & CHANGE KIT Part No. ESSENTIAL 2 ALB1100 Boiling point tester: the only test method approved by brake & brake fluid manufacturers Accurate, reliable & repeatable results Operates off 12 volt supply, vehicles own battery Measures up to 320, suitable for use on all grades of brake fluid & racing fluids ALB598 Full fluid change can be completed by a single operator in approx. 15 minutes Fully adjustable pressure regulator bar Draws fluid direct from 5Ltr container Auto cut-off prevents air entering system if fluid supply is interrupted Portable unit with carry handle - only 9kg Storage facility for brake fluid container (5 Ltr) & multi-vehicle cap set ALB30564B Multi Vehicle Cap Kit including: European Cap Adapter, ALB592B patented multi-vehicle cap (30-85mm diameter), Bleed bottle & Syringe ALB30912 Ford Fiesta Cap Adapter, Exclusively from Alba Diagnostics ALB40018 Hyundai & Kia adapter, Exclusively from Alba Diagnostics Kit Contents: ALB Brake Fluid Tester ALB598A - Pressure Brake Bleeder ALB30564B - Multi Vehicle Cap Kit ALB Ford Fiesta (42.8mm) ALB Hyundai & Kia (50.5mm) Kit Available Exclusively from Alba Diagnostics