Prices subject to change

Transcription

1 Prices subject to change

2 BRONCO CATALOG VOLUME 4 November CASSIA WAY HENDERSON, NEVADA TOLL FREE FAX sales@scottdrake.net website: Prices subject to change Copyright Scott Drake Enterprises. This catalog, and the contained photographs, line drawings, artwork and text is copyrighted. Use of said material is strictly prohibited. Violators will be prosecuted to the fullest extent of the law. 2 Find Find a dealer a dealer near near you, you, visit visit

3 Chrome Antenna Assembly Replace that rusty old antenna with our complete, ready-toinstall, chrome antenna assembly. This new addition to the Scott Drake Bronco product line-up, is an exact reproduction of the original. Antenna features a beautiful bright chrome mounting bezel and retaining nut. Antenna shaft is highlypolished, and retracts smoothly down into the attached protective metal tube. Wires are encased in a protective, water-proof rubber sleeve which attaches directly the to firewall with the provided hardware C6TZ S C6TZ PAD ACCESSORIES LICENSE PLATE FRAME LICENSE PLATE FRAME (STAINLESS STEEL) Scott Drake does it again with this highly polished, stainless steel license plate frame. This beautiful piece really will catch the eye. The spring from your original frame must be used for proper installation. MSRP: $49.95 AUDIO ANTENNA HARDWARE ANTENNA RUBBER PAD This is not a die cut flat piece of rubber but an exact copy of the original. Injection molded rubber pad with beaded edge. MSRP: $5.95 ANTENNA MOUNTING KITS ANTENNA MOUNTING KIT (NUT, BASE AND PAD) Made from pressure die-cast zinc. Base and nut have flawless chrome. Kit includes rubber base pad. MSRP: $ Complete Bronco Antenna Assembly C6TZ A C6TZ K MSRP: $29.95 Units: KI BRAKE SYSTEM EQUALIZERS & RODS PARKING BRAKE EQUALIZER ROD Stamped from original-thickness heavy gage steel for strength, and then zinc plated for a beautiful finish. 66 B7A-2628-B MSRP: $11.95 *... or call

4 MASTER CYLINDER PUSHROD BUSHINGS C5DZ-2474-A MASTER CYLINDER PUSHROD BUSHING Now available. Made of white nylon for long life. MSRP: $2.75 * PARKING BRAKE LEVER SPRING PARKING BRAKE LEVER SPRING Exact O.E.M. replacement, not an over the counter universal spring. Painted black. MSRP: $6.95 * C5ZZ-2A651-A BRAKE & CLUTCH PEDAL PADS Made from high-quality E.P.D.M. molded rubber. Available in standard style like the original, or with raised Bronco script molded into pads for an extra special touch. (Does not fit trucks with factory automatic.) (Original Design w/o Bronco Script) B7A-2457-A...MSRP $4.95 Units EA BRAKE & CLUTCH RUBBER PADS - ORIGINAL DESIGN C6TZ-2457-A...MSRP $9.95 Units EA BRAKE & CLUTCH RUBBER PADS - BRONCO SCRIPT C6TZ-2457-B...MSRP $12.95 Units EA Bronco Script Brake Pedal Pad (Auto Trans) COOLING SYSTEM CONCOURS RADIATOR CAPS These concourse quality caps are made in America and bear all the original markings. O.E.M. details include original letter style, SMCO. Pound rating is stamped on cap C5ZZ-8100-A... MSRP $14.95 * Units EA SMCO CON Radiator Cap (Zinc Plated) C5ZZ-8100-AC... MSRP $14.95 * Units EA SMCO CON Radiator Cap (Chrome Plated) C7ZZ-8100-A... MSRP $18.95 * Units EA Autolite Radiator Cap (Zinc Plated) C7ZZ-8100-AC... MSRP $18.95 * Units EA Autolite Radiator Cap (Chrome Plated) STAINLESS STEEL RADIATOR BRACKETS Kit includes both upper and lower brackets, complete with molded E.P.D.M. rubber mounting pads. Comes in both 3 row and 4 row versions. Available in black painted stamped steel or highly-polished 304 stainless steel C6TZ-8A193-3SK... MSRP $39.95 Units SE RADIATOR BRACKET SET (STAINLESS STEEL) - (3 ROW) INCLUDES UPPERS, LOWERS AND INSULATORS C6TZ-8A193-4SK... MSRP $39.95 Units SE RADIATOR BRACKET SET (STAINLESS STEEL) - (4 ROW) INCLUDES UPPERS, LOWERS AND INSULATORS C6TZ-8A193-K... MSRP $29.95 Units SE STEEL RADIATOR BRACKET SET (BLACK) - (3 ROW) INCLUDES UPPERS, LOWERS AND INSULATORS RADIATOR BRACKET INSULATORS Made from E.P.D.M. rubber, molded just like the original. Available in both 3 row or 4 row versions C6TZ K... MSRP $11.95 Units SE RADIATOR RUBBER INSULATORS - (3 ROW) C6TZ K... MSRP $11.95 Units SE RADIATOR RUBBER INSULATORS - (4 ROW) C6TZ-8A080-A OVERFLOW BOTTLES RADIATOR OVERFLOW BOTTLE With Stainless Strap A reproduction of the original style radiator bottle, this high quality part comes complete with polished stainless steel retaining straps, and mounting hardware. MSRP: $39.95 DOORS & WINDOWS STRIKER PLATES & SHIMS This is a beautiful reproduction. Striker plates come complete with striker plate, shim, and screws C2OZ B...MSRP $12.95 * Units SE DOOR STRIKER PLATE & SHIM - GOLD ZINC C5AZ B...MSRP $14.95 * Units SE DOOR STRIKER PLATE & SHIM - SILVER ZINC 4 Find a dealer near you, visit

5 HINGES Made by Scott Drake, Bronco Door Hinges. These standard replacement hinges feature oversized pins and bronze bushings for long wear. DOOR LATCH ROD RETAINERS DOOR LATCH ROD RETAINER The door latch rod retainers connect the four rods to the latch and lock assemblies inside the doors. Six of these are required for each door C6TZ A...MSRP $49.95 Units EA Door Hinge (Black, RH) C6TZ A...MSRP $49.95 Units EA Door Hinge (Black, LH) C6TZ SK C6TZ BK HINGE KITS Removable Door Hinge Kit (Stainless Steel) Made by Scott Drake, Removable Door Hinges! This kit includes: 4 removable style door hinges, 2 quick-release door check brackets, 2 nylon web door straps with stainless anchors, and all the hardware needed to convert your Bronco. Everything is high-quality stainless steel and our hinges and brackets are highly polished. MSRP: $ Units: KI DOOR STRAPS DOOR STRAPS (BLACK) W/STAINLESS STEEL ANCHORS & HARDWARE Made with heavy-duty nylon webbing just like the original straps, to resist wear & rot. Additional improvements include solid stainless-steel anchors, and stainless-steel pan-head phillips screws. One set does both doors. MSRP: $19.95 Units: SE WINDOW REGULATORS Scott Drake s reputation for making high quality and durable window regulators for the classic Mustang follows with our new Bronco window regulators. We designed our regulator to use both early and late window cranks. Constructed of heavy gauge steel and painted satin black for long life. The roller bushing is also included. They are ready to roll C8TZ A...MSRP $84.95 Units EA Window Regulator (RH) C8TZ A...MSRP $84.95 Units EA Window Regulator (LH) C3AZ BR C5AZ AR MSRP: $4.95 LOCK ROD RETAINERS LOCK ROD RETAINER Another Scott Drake exclusive. We made an exact reproduction of the original retainer that has been obsolete from Ford for years. MSRP: $4.95 CONTROL & LINK ASSEMBLIES A perfect reproduction. Stamped steel, precisionmachined stem. All gold zinc plated. Available in both right and left hand. Order part #C3AZ BR for door latch rod retainer. 67 C5ZZ C... MSRP $14.95 * Units EA DOOR LATCH CONTROL & LINK ASSEMBLY (RH) 67 C5ZZ C... MSRP $14.95 * Units EA DOOR LATCH CONTROL & LINK ASSEMBLY (LH) DOOR HANDLE CONTROLS Now available from Scott Drake, Inner Door Handle Controls! These door controls feature a strong spring and zinc plating for years of service. Available for the right or left hand side. Requires 1 lock rod clip, part #C5AZ AR C8TZ A...MSRP $19.95 Units EA Inner Door Handle Controls (RH) C8TZ A...MSRP $19.95 Units EA Inner Door Handle Controls (LH)... or call

6 Show Quality Exterior Door Handles Putting the finishing touches on that restoration project? There s no better choice than these exact reproduction exterior door handles. Made from pressure die-cast zinc, and then finished in high-quality, triple chrome plating. The chrome on these handles is perfect and un-pitted, and after going through CASS verification and rigerous salt spray testing, the finish is guaranteed for 2 years. Handles come in pairs and include buttons, aligning studs, button-stop o-rings, springs, gaskets, and all mounting hardware. Can it get any better than this? MSRP: $64.95* Show Quality Exterior Chrome Door Handles C4DZ /5P DOOR LATCHES This door latch assembly is a beautiful copy of a complicated stamping. Comes fully assembled and ready to install. Available in both right and left versions. DOOR HANDLE PADS DOOR HANDLE PADS (SET OF 4) Injection-molded plastic just like the original C3OZ A...MSRP $62.50 Units EA DOOR LATCH (RH) C3OZ A...MSRP $62.50 Units EA DOOR LATCH (LH) C6TZ B WINDSHIELD KNOBS WINDSHIELD KNOBS These knobs are used to lock windshield in place. Exact copy of the originals, made with die-cast zinc construction, and flawless chrome. MSRP: $49.95 Units: PR EXTERIOR DOOR HANDLES EXTERIOR DOOR HANDLES IMPORTED Good quality and economically priced for the value-minded shopper. Kit includes both left and right handles, buttons, pads, hardware and brackets C0DZ /9K C7TZ-99431B82-S C8OZ /7B MSRP: $4.00 * TAILGATE HANDLE Units: SE TAILGATE HANDLE (STAINLESS STEEL) Now available from Scott Drake, Tailgate Handles! These handles are an exact reproduction of the original with a highly polished stainless steel finish! MSRP: $29.95 VENT WINDOW HANDLES VENT WINDOW HANDLES (PAIR) Another great new reproduction from Scott Drake. Our vent handles are cast from our own tooling with a great chrome finish. Our nylon tips will not scratch the vent frame. Sold as a matched pair. MSRP: $29.95 Units: PR C4DZ /5A MSRP: $25.95 * Units: SE 6 Find a dealer near you, visit

7 DOOR LOCK KNOBS DOOR LOCK KNOB Plastic injection molded, very good detail, with a smooth chrome finish. WINDOW CRANK COVER PLATES WINDOW CRANK HANDLE COVER PLATE ALUMINUM This is a aluminum disc that covers the window crank handle screw hole. Stamped aluminum with circular brushed finish and adhesive backed C8AZ A MSRP: $5.00 Units: PR C8AZ A MSRP: $1.25 * WINDOW CRANKS WINDOW CRANK Highly detailed die-cast zinc construction. Finished in beautiful chrome. INTERIOR DOOR HANDLES This quality reproduction is just like the original in every way. Finished in perfect chrome. Available for left and right hand C8AZ A MSRP: $12.00 * WINDOW CRANK KNOBS & PINS A premium reproduction. These knobs are molded PVC and have a plastic insert just like the originals. Mounting pin and wave washer is also included. Available in various colors C8AZ B...MSRP $39.95 Units EA INSIDE DOOR HANDLES (RH) C8AZ B...MSRP $39.95 Units EA INSIDE DOOR HANDLES (LH) DOOR CUPS These plastic injected-molded door cups are an exact copy, with the correct-textured surface. Available in black or white C8AZ BK... MSRP $5.95 * Units EA WINDOW CRANK KNOB & PIN (BLACK) C8AZ BL... MSRP $7.95 * Units EA WINDOW CRANK KNOB & PIN (BLUE) C8AZ CL... MSRP $7.95 * Units EA WINDOW CRANK KNOB & PIN (CLEAR) C8AZ GI... MSRP $7.95 * Units EA WINDOW CRANK KNOB & PIN (GINGER) C8AZ GR... MSRP $7.95 * Units EA WINDOW CRANK KNOB & PIN (GREEN) C8AZ IG... MSRP $7.95 * Units EA WINDOW CRANK KNOB & PIN (IVY GOLD) C8AZ MR... MSRP $7.95 * Units EA WINDOW CRANK KNOB & PIN (MAROON) C8AZ PR... MSRP $7.95 * Units EA WINDOW CRANK KNOB & PIN (PARCHMENT) C8AZ VE... MSRP $7.95 * Units EA WINDOW CRANK KNOB & PIN (VERMILLION) C8AZ WT... MSRP $7.95 * Units EA WINDOW CRANK KNOB & PIN (WHITE) C8AZ B...MSRP $21.95 Units PR DOOR CUPS (BLACK) C8AZ W...MSRP $21.95 Units PR DOOR CUPS (WHITE) ARM REST PADS Urethane foam, molded with correct grain C8TZ BK...MSRP $27.95 Units EA ARM REST PADS (BLACK, RH) C8TZ BK...MSRP $27.95 Units EA ARM REST PADS (BLACK, LH) C8TZ PR...MSRP $29.95 Units EA ARM REST PADS (PARCHMENT, RH) C8TZ PR...MSRP $29.95 Units EA ARM REST PADS (PARCHMENT, LH)... or call

8 DOOR PANELS Quality Bronco door panels in black or parchment, with mylar or woodgrain accents Electroluminescent Instrument Gauges C8TZ BM...MSRP $ Units PR Door Panels (Mylar/Black) C8TZ BW...MSRP $ Units PR Door Panels (Woodgrain/Black) C8TZ PM...MSRP $ Units PR Door Panels (Mylar/Parchment) C8TZ PW...MSRP $ Units PR Door Panels (Woodgrain/Parchment) C7TZ-99279A6/7S ELECTRICAL SYSTEM BEZELS TAIL LAMP BEZELS (STAINLESS STEEL, PAIR) Our stainless steel tail light bezels are highly polished and ready to install. These are a perfect match to our stainless steel license plate frame MSRP: $59.95 Units: PR REFLECTOR BEZELS (POLISHED STAINLESS STEEL, WITH PAD) Scott Drake has reproduced these Reflector Bezels in highquality Stainless Steel. These Bezels are sold in pairs, include foam backing pads, and new mounting hardware. MSRP: $99.95 A Scott Drake exclusive product, these Bronco instrument panels are made with a space-age electroluminescent substance that actually glows. Designed to easily mount over your original Ford gauges. Gauge faces light up making instruments safer and much easier to see. Light intensity can be adjusted with the included control knob and the color can be changed from a soft blue to soft green with a punch of a button. Includes panels, wiring harness, controller, and instructions. Adhesive mounted D0UZ-15A460-S MSRP: $49.95 Units: PR Electroluminescent Instrument Gauges C6TZ GLO PARKING LAMP SEALS PARKING LAMP SEALS Another addition to the Scott Drake line of Bronco products, Bronco Parking Lamp Seals. These seals are made from high-quality, gray EPDM rubber to match the originals. Sold in Pairs C9TZ A MSRP: $19.95 Units: PR 8 Find a dealer near you, visit

9 DIMMER SWITCHES DIMMER SWITCH This quality after-market dimmer switch matches the original nicely. Imported. Note: Electrical parts are not returnable. BATTERY HOLD DOWN CLAMP BLACK PLASTIC Built with the same nylon plastic material like the original. A very good reproduction C0TZ-13A024-A MSRP: $7.50 * D0DZ A MSRP: $14.95 * BATTERY HOLD DOWN BOLT D3ZZ A HEADLIGHT SWITCHES HEADLAMP LIGHT SWITCH This quality after-market headlamp switch matches the original nicely. Imported. Note: Electrical parts are not returnable. MSRP: $18.95 * D0AZ A BATTERY HOLD DOWN BOLT Bolt to secure the battery in the tray. MSRP: $1.95 * BATTERY HOLD DOWN KITS C3UZ A IGNITION SWITCHES IGNITION SWITCH ASSEMBLY This high-quality after-market ignition switch is one of the best reproductions available. Imported. Note: Electrical parts are not returnable. MSRP: $13.95 * STOP LAMP SWITCHES STOP LAMP SWITCH A high-quality electrical component. Note: Electrical parts are not returnable C5AZ KIT D0AZ K BATTERY CLAMP KIT Includes battery clamp and bolt (or bolts) required to mount battery on tray. MSRP: $10.95 * Units: KI BATTERY HOLD DOWN KIT J BOLTS WITH NUT These attractively packaged kits offer added perceived value to your customers. Kit comes complete with J bolts and mounting nuts. MSRP: $4.95 * Units: KI 66 C4DZ A MSRP: $9.95 * BATTERY HOLD DOWN CLAMPS INSTRUMENT CLUSTER INSTRUMENT CLUSTER VOLTAGE REGULATOR Good-quality voltage regulator. BATTERY HOLD DOWN CLAMP Heavy duty stamped steel construction with black vinyl coating like the original B9MZ C MSRP: $29.95 * C5AZ A MSRP: $4.95 *... or call

10 66-77 C6TZ EFI EFI WIRING HARNESS KITS EFI WIRING HARNESS KIT Our new EFI (Electronic Fuel Injection) Wiring Harness Kit comes wrapped and ready to install. Our top-quality fire-resistant wires are printed with the name of the sensor or terminal they connect to, and have correct length wires and Ford connections. Note: designed for mass air 5.0 motors, but will work on and all mass air flow 5.8 motors using Mustang or GT40 style intake and throttle body. MSRP: $ Units: KI TURN SIGNAL REPAIR KITS TURN SIGNAL REPAIR SWITCH This product is not a copy! Made by the original Ford supplier, this switch is perfect in every way. Made in USA. Note: Electrical parts are not returnable. FUEL SENDING UNITS Original equipment copy. Our filters are the best OEM reproductions available. Includes brass float C6TZ-9275-AUX...MSRP $74.95 Units EA AUXILIARY FUEL SENDING UNIT - with Brass Float and OE Filter C6TZ-9275-D...MSRP $74.95 Units EA FUEL SENDING UNIT - with Brass Float and OE Filter TEMP SENDING UNITS High-quality, after-market temperature sending unit C3DZ B MSRP: $9.95 TURN SIGNAL SWITCHES This product is not a copy! Made by the original Ford supplier, this switch is perfect in every way. Made in USA. Note: Electrical parts are not returnable. 66 C3AZ A... MSRP $5.95 * Units EA TEMP SENDING UNIT - BEFORE SERIAL NO. 51, C6DZ B... MSRP $5.95 * Units EA TEMP SENDING UNIT - AFTER SERIAL NO. 51,001 EMBLEMS & ORNAMENTS C5OZ B... MSRP $41.95 * Units EA TURN SIGNAL SWITCH - Will fit but wire colors are different D5TZ B...MSRP $52.95 Units EA TURN SIGNAL SWITCH - AUTO D3TZ A...MSRP $56.95 Units EA TURN SIGNAL SWITCH - MANUAL C9ZZ-9278-A OIL PRESSURE SENDING UNITS OIL PRESSURE SENDING UNIT High-quality, after-market oil pressure sending unit. Made in USA. MSRP: $16.95 * D9ZZ A C3OZ FENDER EMBLEMS 5.0 FENDER EMBLEM Made by Scott Drake. We feel these are the best reproductions on the market. Features flawless chrome and an eye catching red dot. Adhesive back really sticks. Applications go way beyond the intended model years. MSRP: $10.50 * FENDER EMBLEM (5.0) Made in response to customer requests for a 5.0 version of our popular reproduction 289 emblem. Made with a perfect chrome finish and black painted background. Includes mounting hardware. Note: Not an authentic copy of any original Ford emblem. MSRP: $14.95 * 10 Find a dealer near you, visit

11 FENDER EMBLEM (302) BRONCO SCRIPT FENDER EMBLEM (SPORT) C3OZ Made in response to customer requests for a 302 version of our popular reproduction 289 emblem. Made with a perfect chrome finish and black painted background. Includes mounting hardware. Note: Not an authentic copy of any original Ford emblem. MSRP: $13.95 * C7TZ A This concours quality emblem is an exact copy of the original. Sport background is painted the correct poppy red. Finished in flawless chrome. Includes mounting hardware. MSRP: $ C3OZ B C5ZZ B FENDER EMBLEM (289) This die-cast 289 fender emblem looks just like the original. Made with a perfect chrome finish and black painted background. Includes mounting hardware. MSRP: $8.95 * HIGH PERFORMANCE EMBLEM Original ford emblem which mounts under 289 badge on vehicles with the HiPo engine option. Fits any Scott Drake V-Badge. Includes mounting hardware. MSRP: $10.00 * C7TZ-8316-S HOOD EMBLEMS FORD LETTER HOOD EMBLEMS (W/RED INSERTS) A spectacular piece of automotive jewelry. Constructed of die-cast zinc, with concours chrome plating. Inserts are finished with ruby-red reflective paint. Includes mounting hardware. MSRP: $99.95 Units: SE SCUFF PLATE EMBLEMS FORD OVAL DOOR SILL SCUFF PLATE EMBLEM (BLACK) Aluminum stamping with raised black Ford logo and a painted background. 3M adhesive mount C5ZZ HO HIGH OUTPUT EMBLEM Original ford emblem which mounts under 5.0 badge. Exact detail of the original, finished in polished chrome and black paint. Fits any Scott Drake V-Badge. MSRP: $14.95 * C5ZZ T MSRP: $1.50 * FORD OVAL DOOR SILL SCUFF PLATE EMBLEM (BLUE) Aluminum stamping with raised black Ford logo and a painted background. 3M adhesive mount C8OZ B FENDER EMBLEM (302) This concours-quality emblem is an exact copy of the original. Made from die-cast zinc, and finished in perfect chrome. Background of emblem is painted like the original. Includes mounting hardware. MSRP: $29.95 SCRIPT FENDER EMBLEMS BRONCO SCRIPT FENDER EMBLEM This concours quality emblem is an exact copy of the original. Finished in flawless chrome. Includes mounting hardware C7ZZ T MSRP: $1.50 * ENGINE ECONOMY DRESS-UP KITS ECONOMY ENGINE DRESS-UP KIT Fits Engines This engine dress-up kit can make any engine compartment look like a million dollars! Includes chrome valve covers, and oil cap. Aftermarket style C6TZ B MSRP: $ C5ZZ-6980 MSRP: $59.95 * Units: KI... or call

12 Bronco Script Valve Covers Looking for the best valve covers that money can buy for your bronco? Look no further. A Ford approved, Officially Licenced Product, these valve covers feature the original Ford Bronco script design. Our bronco script valve covers are made from high-pressure die-cast aluminumalloy zinc. Improved oil baffles. Specifically designed by Scott Drake to work with both standard and highlift cam shafts, and many types of high-lift roller rockers without any additional modification. Finished in durable black wrinkle-powder-coat or natural polished-metal finish. Includes rubber grommet, oil filler tube, and spark plug wire brackets. Made in the USA. (* Note: will not fit EFI engines). Also available in polished finish. MSRP: $ Bronco Script Valve Covers 6A582-B C5ZZ-6980-PRO CHROME DRESS-UP KITS CHROME ENGINE DRESS-UP KIT CONCOURS - Fits Engines Round, original-style air cleaner with concours correct valve covers. Includes chrome oil cap. MSRP: $ * Units: KI STANDARD VALVE COVERS ECONOMY AFTERMARKET VALVE COVERS Polished chrome. Fits Engines Original style construction, highly polished and chrome plated C5ZZ-6A582-G C8OZ-6A582-BL VALVE COVERS (GOLD) Painted, Fits Engines Original style, stamped-steel construction, painted Ford gold. MSRP: $44.95 * Units: PR Power By Ford Valve Covers (Dark Ford Blue) Painted, Fits Engines The latest addition to our extensive line of valve covers. We have produced these valve covers from Ford factory specifications, making them absolutely perfect reproductions. Beautiful Ford dark blue painted finish with Power by Ford stamped on the top. MSRP: $59.95 * Units: PR C5ZZ-6A582-C MSRP: $32.95 * Units: PR VALVE COVERS (BLUE) Painted, Fits Engines Original style, stamped-steel construction, painted Ford blue C8OZ-6A582-C Power By Ford Valve Covers (Chrome) Painted, Fits Engines The latest addition to our extensive line of valve covers. We have produced these valve covers from Ford factory specifications, making them absolutely perfect reproductions. Features a beautiful chrome finish and Power by Ford stamped on the top. MSRP: $99.95 * Units: PR C5ZZ-6A582-BL MSRP: $44.95 * Units: PR 12 Find a dealer near you, visit

13 A A P ALUMINUM VALVE COVERS 289 VALVE COVERS Painted, Fits 289 Engines Pressure die-cast zinc construction, with a black powdercoated wrinkle finish. Features redesigned internal baffles for more valve lifter clearance. MSRP: $ Units: PR 289 VALVE COVERS Polished, Fits 289 Engines Pressure die-cast zinc construction, with a highly polished aluminum finish. Includes redesigned internal baffles for more valve lifter clearance. MSRP: $ Units: PR 302 VALVE COVERS Painted, Fits 302 Engines Pressure die-cast zinc construction, with a black powdercoated wrinkle finish. Features redesigned internal baffles for more valve lifter clearance A582-BP C5ZZ-6A582-AF VALVE COVER (With BRONCO SCRIPT) Polished, Fits Engines Pressure die-cast zinc construction, with a highly polished aluminum finish. Includes redesigned internal baffles for more valve lifter clearance. MSRP: $ Units: PR Valve Covers, Cal Custom Aluminum-Finned These Cal Custom style Valve Covers look great! They offer a true old school look, and fit 260, 289, 302, and 351W engines. Requires one of each of the following (sold separately): PVC grommet (W897712B), oil cap grommet (W84889B), and oil cap (W84991B). MSRP: $89.95 * Units: PR CARB TO AIR CLEANER SCREWS This screw seems to always be missing. We made our screw just a little longer than stock to allow installing the Hi-Po air cleaner. Fit most Autolite 4V carburetors assembly. Zinc plated for years of service A A P A A P MSRP: $ Units: PR 302 VALVE COVERS Polished, Fits 302 Engines Pressure die-cast zinc construction, with a highly polished aluminum finish. Includes redesigned internal baffles for more valve lifter clearance. MSRP: $ Units: PR 351 VALVE COVERS Painted, Fits 351 Engines Pressure die-cast zinc construction, with a black powdercoated wrinkle finish. Features redesigned internal baffles for more valve lifter clearance. MSRP: $ Units: PR 351 VALVE COVERS Polished, Fits 351 Engines Pressure die-cast zinc construction, with a highly polished aluminum finish. Includes redesigned internal baffles for more valve lifter clearance. MSRP: $ Units: PR S... MSRP $6.95 * Units EA CARB SCREW FOR AIR CLEANER (4BBL) S... MSRP $6.95 * Units EA Carb To Air Cleaner Screw (Hi-Po) CONCOURS AIR CLEANERS Round stamped air cleaner. Correct for time period, but not an original Bronco part. Available with either chrome/blue or chrome/gold painted base. Includes 289 HiPo decal C5ZZ MSRP $44.95 * Units SE AIR CLEANER - CONCOURS (CHROME/BLUE) - 14 X C5ZZ-9600-G...MSRP $44.95 * Units SE AIR CLEANER - CONCOURS (CHROME/GOLD) - 14 X or call

14 HI-PO AIR CLEANERS OIL DIP STICK TUBE (SCREW IN STYLE) C5ZZ-9600-W AIR CLEANER (HI-PO) 14 X 2.25 Generic version, economically priced. Chrome top with painted blue bottom. Includes 289 HiPo decal. MSRP: $21.95 * D1TZ-6754-C The newest addition to our already extensive line of Ford engine oil tubes. This Bronco tube is made from Ford Factory specs. We added a beautifully polished chrome finish to dress up the engine. A perfect match to our chromed oil stick. MSRP: $24.95 CONCOURS OIL CAPS PCV HOSES PCV HOSE ( , With Logo) These reproduction caps are exact replacements for missing or dented original filler caps. Concours correct with ink stamped Ford script C6AZ-6A664-N C4AE-6853-B MSRP: $12.95 * OIL CAP TO AIR CLEANER HOSE OILCAP/AIR CLEANER HOSE Correct hose to connect the oil cap breather to the air cleaner. Features oval Ford logo MSRP: $11.95 * OIL PANS OIL PAN (SCREW IN STYLE) Our oil pan is stamped from heavy gauge steel to exacting Ford specs. We have the blue prints to prove it. Features the screw-in oil tube mount. Ready to install C5ZZ-6766-D... MSRP $19.95 * Units EA OIL CAP (Push-on, with tube, Chrome) B6AZ-6766-B... MSRP $15.95 * Units EA OIL CAP FOMOCO (without tube, Chrome) C5ZZ-6766-B... MSRP $15.95 * Units EA Oil Cap With FOMOCO logo (With Tube, Black) C5ZZ-6766-FR... MSRP $12.95 * Units EA Oil Cap for Open Emissions (Without Tube, Black) C8AZ-6766-A... MSRP $29.95 * Units EA Oil Cap for Closed Emissions (Black) C8AZ-6766-B... MSRP $34.95 * Units EA Oil Cap for Closed Emissions (Chrome) OIL PRESSURE UNIT EXTENSIONS Hex shaped extension. Made from machined metal. Available in either a zinc-plated, or highlypolished chrome finish C8TZ-6675-B MSRP: $ DIP STICKS AND RELATED C2OZ-9B339-A... MSRP $24.95 * Units EA OIL PRESSURE UNIT EXTENSION (ZINC) - Fits C2OZ-9B339-C... MSRP $26.95 * Units EA OIL PRESSURE UNIT EXTENSION (CHROME) - Fits D1TZ-6750-BAC OIL DIP STICK (CHROME) The newest addition to our already extensive line of Ford engine oil sticks. This Bronco stick is made from Ford Factory specs and features exact details stamped on the indicator. Also features an easy to read gray phosphate finish. Of course, we topped it off with a beautiful chrome handle. The perfect match to our chrome oil tube. MSRP: $ C9ZZ-9278-A OIL PRESSURE SENDING UNITS OIL PRESSURE SENDING SWITCH High-quality, after-market oil pressure sending unit. Made in USA. MSRP: $16.95 * 14 Find a dealer near you, visit

15 TEMP SENDING UNITS High-quality, after-market temperature sending unit. Made in USA. TIMING POINTERS REMOVABLE TIMING POINTER (BLACK) Stamped steel pointer mounts to timing chain cover. 66 C3AZ A... MSRP $5.95 * Units EA TEMP SENDING UNIT - BEFORE SERIAL NO. 51, C6DZ B... MSRP $5.95 * Units EA TEMP SENDING UNIT - AFTER SERIAL NO. 51,001 STARTER SOLENOIDS STARTER SOLENOID This is a good quality starter solenoid at a competitive price C2OZ-6023-B C5AE-10A370-A MSRP: $7.95 * ALTERNATOR SPACERS ALTERNATOR SPACER GOLD FINISH Used to mount alternator in correct location. With gold-anodized aluminum. MSRP: $9.95 * B6AZ A C5ZZ-6268-RK C5OZ-6019-B MSRP: $9.95 * TIMING CHAIN High Performance Roller Timing Chain Set (Small Block) Premium construction made by Cloyes. Features.250 diameter seamless True roller chain cast iron cam sprocket and heat treated billet steel crank sprocket with three patented keyways for timing. Excellent wear resistance and proven reliability for high performance applications. MSRP: $51.95 * Units: SE TIMING COVERS TIMING COVER Fits 289, 302, 351W Durable cast-iron timing cover, for cast-iron water pumps. Requires bolt-on timing pointer. MSRP: $99.95 * ALTERNATOR BRACKETS After market stamped-steel alternator brackets. Available in black or chrome finish C5ZZ-10145/51BK...MSRP $14.95 * Units SE ALTERNATOR BRACKET SET (BLACK) - Fits C5ZZ-10145/51-K...MSRP $14.95 * Units SE ALTERNATOR BRACKET SET (CHROME) - Fits SPARK PLUG WIRE SEPARATOR SETS Exclusively from Scott Drake, these Spark Plug Wire Separators are made of high-quality ABS plastic. Constructed to hold both standard 7mm and 8mm high-performance spark plug wires. Fits directly on valve cover bracket B6AB8Q KA...MSRP $11.95 * Units SE Spark Plug Wire Separator (Set, Black) B6AB8Q KB...MSRP $13.95 * Units SE Spark Plug Wire Separator (Set, Blue) B6AB8Q KR...MSRP $13.95 * Units SE Spark Plug Wire Separator (Set, Red)... or call

16 SPARK PLUG WIRE SEPARATORS PERFORMANCE HARMONIC BALANCERS B6A A SPARK PLUG WIRE SEPARATOR (BLACK, BULK) Made of heat resistant black nylon. Keeps spark plug wires neat and orderly. MSRP: $2.00 * SPARK PLUG WIRE SEPARATOR (BLACK, BULK) Made of heat resistant black nylon. Keeps spark plug wires neat and orderly. Mounts on valve covers. Our great new street balancers, of extremely tough nodular iron, are suitable for all street applications and mild (non SFI) racing applications. Designed to be safely reved to as high as 65,000 rpm and precision machined to tolerances tighter than OEM. Elastomer is bonded to the hub and ring for extra durability. Gloss black finish with three sets of easyto-read white timing marks to cover most small block balancer application MSRP $99.95 * Units EA High Performance Harmonic Balancer (28 oz) MSRP $99.95 * Units EA High Performance Harmonic Balancer (50 oz) HARMONIC BALANCERS B8Q A MSRP: $3.95 * HIGH QUALITY OEM REPLACEMENT. COIL AND RELATED PARTS After years of being off the market Scott Drake brings back the original style coil bracket. We used the specifications from the original Ford print to produce exact details. We made our bracket capable of holding the smaller coils on the market today as well the original coils. Zinc plated hex head bolt and nut included C4DZ A... MSRP $12.95 * Units EA Coil Bracket (Black) C4DZ S... MSRP $16.95 * Units EA Coil Bracket (Stainless Steel) CUSTOM HARMONIC BALANCERS This is used when running a late model 5.0 engine with the v belt pulley system. New balancer. Made in the U.S.A C2DZ-6312-A... MSRP $ * Units EA Harmonic Balancer (200, 6 cylinder) C5AZ-6316-B... MSRP $99.95 * Units EA Harmonic Balancer (289, Except Hi-Po) C8AZ-6316-A... MSRP $ * Units EA Harmonic Balancer (302, Without Lip, 3 BOLT) C9OE-6316-D... MSRP $ * Units EA Harmonic Balancer (302, With Lip, 3 BOLT) D2OZ-6316-A... MSRP $ * Units EA Harmonic Balancer (302, 4 BOLT) EXHAUST SYSTEM EXHAUST MANIFOLDS Cast from high-quality molds for proper fit and appearance. Includes exhaust flange bolts, nuts and washers C5AZ MSRP $ * Units EA 5.0 Convertible Harmonic Balancer D2TE MSRP $ * Units EA 5.0 Convertible Harmonic Balancer C3OZ-9430-AR... MSRP $ Units EA EXHAUST MANIFOLD - Fits Includes flange bolts, nuts, and washers. 16 Find a dealer near you, visit

17 EXHAUST HEADERS Our Bronco headers are made from extra-thick 16-gauge tubes and 3/8 laser cut flanges for extreme durability. Most competitors use thinner 18 gauge tubes with 5/16 stamped flanges. Includes premium gaskets, collectors and hardware. Available in in raw steel, black low-temp paint or nickel plated. AFTERMARKET FUEL PUMPS These original style diaphragm pumps are allnew, not rebuilt. Includes mounting gasket C6TZ-9430-RAW... MSRP $ Units SE EXHAUST HEADERS - Plain (Unfinished) C6TZ-9430-N... MSRP $ Units SE EXHAUST HEADERS - Nickel Plated C6TZ-9430-BLK... MSRP $ Units SE EXHAUST HEADERS - Black Painted (Non-high temp) FUEL SYSTEM ACCELERATOR PEDALS ACCELERATOR PEDAL An exact copy of the original accelerator pedal. Rubber molded with steel insert C3AZ-9350-Y... MSRP $54.95 * Units EA Fuel Pump ( ) C5AZ-9350-B... MSRP $29.95 * Units EA Fuel Pump ( ) 69 C5UZ-9350-C... MSRP $49.95 * Units EA Fuel Pump (200 6 Cyl) D3TZ-9350-A... MSRP $39.95 * Units EA Fuel Pump ( Cyl) AFTERMARKET FUEL FILTERS FUEL FILTER 5/16 IN/OUT (CHROME, GLASS) Aftermarket Fuel Filter with 5/16 inlet/outlet, chrome with glass body C5AZ-9735-D MSRP: $13.95 FUEL SENDING UNITS W89258B MSRP: $8.50 * FUEL FILTER 3/8 IN/OUT (CHROME) Aftermarket Fuel Filter with 3/8 In/Out Chrome Original equipment copy. Our filters are the best OEM reproductions available. Includes brass float W89418B MSRP: $7.95 * C6TZ-9275-AUX...MSRP $74.95 Units EA AUXILIARY FUEL SENDING UNIT - with Brass Float and OE Filter C6TZ-9275-D...MSRP $74.95 Units EA FUEL SENDING UNIT - with Brass Float and OE Filter HARDWARE LICENSE PLATE MOUNTING LICENSE PLATE FASTENER CLIP These convenient clips make for easy installation of the license plate S MSRP: $0.45 *... or call

18 MASTER BODY KITS These concours-correct fastener kits are a great time saver for any restoration project. BUMPER BOLT KITS BUMPER BOLT KIT (DELUXE 28PC) These time saving kits contain everything you need to install the front and rear bumpers. 66 MBK-C6BB-MASTER... MSRP $ Units SE MASTER BODY KIT 67 MBK-C7BB-MASTER... MSRP $ Units SE MASTER BODY KIT 68 MBK-C8BB-MASTER... MSRP $ Units SE MASTER BODY KIT MBK-C9BB-MASTER... MSRP $ Units SE MASTER BODY KIT MBK-D1BB-MASTER... MSRP $ Units SE MASTER BODY KIT SPARE TIRE MOUNTING C5ZZ DLXK C6TZ S MSRP: $14.00 * Units: KI HOOD LATCHES HOOD LATCH (STAINLESS STEEL) WITH HARDWARE Stamped, 304 stainless steel construction. Brightly polished and built to last. MSRP: $24.95 Spare tire plate, bracket and wing nut. Nice copies of the originals. Available together or all pieces separately. Finished either zinc plated or in polished 304 stainless steel for extra corrosion protection. HOOD PIN ASSEMBLIES HOOD PIN ASSEMBLY STAINLESS STEEL Highly-polished 304 stainless steel. Rust proof construction will not corrode B9AZ-1462-A... MSRP $2.25 * Units EA Spare Tire Wing Nut (Except Swing Away Carrier) C8TZ-1424/62-K... MSRP $19.95 Units SE SPARE TIRE PLATE & WINGNUT - ZINC C8TZ-1424/62-SK... MSRP $29.95 Units SE SPARE TIRE PLATE & WINGNUT - STAINLESS STEEL C8TZ-1424-A...MSRP $8.95 Units EA SPARE TIRE PLATE - ZINC C8TZ-1424-S...MSRP $11.95 Units EA SPARE TIRE PLATE - STAINLESS STEEL C8TZ-1462-A...MSRP $13.95 Units EA SPARE TIRE BRACKET WING NUT - ZINC C8TZ-1462-S...MSRP $18.95 Units EA SPARE TIRE BRACKET WING NUT - STAINLESS STEEL HEADLIGHT RINGS HEADLIGHT RING STAINLESS STEEL Headlight ring features high-quality, stamped steel construction C6TZ SK C5ZZ B MSRP: $29.95 HOOD BUMPERS HOOD TO COWL BUMPER Rubber bumpers molded to metal threaded inserts. Exact copy of 68-70, but will fit MSRP: $3.00 HOOD PROP RODS HOOD PROP ROD STAINLESS STEEL All nice compliment to any engine compartment. Highlypolished 304 stainless steel construction will not rust D3TZ A MSRP: $ C6TZ S MSRP: $24.95 Units: KI 18 Find a dealer near you, visit

19 JACK STRAPS Designed to hold jack. Available in either black painted stamped metal or rust-proof, 304 stainless steel for extra strength and corrosion resistance. WASHER BAG BRACKET WASHER RESERVOIR MOUNTING BRACKET Stamped steel, painted black enamel C6TZ-17A012-A...MSRP $12.95 Units EA JACK STRAP (BLACK) C6TZ-17A012-S...MSRP $18.95 Units EA JACK STRAP (STAINLESS Steel) DOOR PANEL CLIPS WIRE TYPE DOOR PANEL CLIP OEM style wire clips. Primer painted C4AZ A MSRP: $5.95 * HEATER & AIR CONDITIONER HEATER HOSE CONNECTORS This correct connector screws into the intake manifold. Heater hose attaches to the opposite end. Gold zinc, Silver Zinc, and chrome plated, highly-polished finish versions available S MSRP: $0.35 * WINDOW ROLLER & CLIP Wear-resistant nylon bushing, includes retainer C6AZ B... MSRP $16.95 * Units EA Water Inlet Elbow (Small Block, Gold Zinc) - Fits C6AZ C...MSRP $21.95 Units EA Water Inlet Elbow (SMALL BLOCK, CHROME) - Fits C6AZ S... MSRP $16.95 * Units EA Water Inlet Elbow (SMALL BLOCK, SILVER ZINC) - Fits C0AB B MSRP: $1.00 * STEERING WHEEL HARDWARE HORN BUTTON SPRING USED WITH HORN RING Wire spring used with horn ring. Painted S HEATER CABLE CLAMP BRACKET HEATER CABLE CLAMP BRACKET Secures cable to heater control assembly, heater plenum and heater box. Black oxide bracket with screw. MSRP: $1.95 * Units: SE C0DZ-13A807-B C2DZ-13A809-A MSRP: $4.95 * HORN BUTTON RETAINER (ALT) Nylon plastic injection. Correct original design. MSRP: $2.00 INTERIOR PARTS & UPHOLSTERY C6TZ B SILL PLATES BRONCO BILLET SILL PLATES Another first from Scott Drake, Bronco Billet Sill Plates! These sill plates are made from beautiful, T-6061 billet aluminum and feature the Bronco script stamped in the center. Include stainless steel mounting screws. MSRP: $ Units: PR... or call

20 DOOR PANELS Quality Bronco door panels in black or parchment, with mylar or woodgrain accents. RUBBER FLOOR MATS FLOOR MAT RUBBER (FULL) Front & Rear Quality EPDM rubber with textured surface C8TZ BM...MSRP $ Units PR Door Panel (Mylar on Black) C8TZ BW...MSRP $ Units PR Door Panel (Woodgrain on Black) C8TZ PM...MSRP $ Units PR Door Panel (Mylar on Parchment) C8TZ PW...MSRP $ Units PR Door Panel (Woodgrain on Parchment) ARM REST PADS Urethane foam, molded with correct grain C8TZ BK...MSRP $27.95 Units EA ARM REST PADS (BLACK, RH) C8TZ BK...MSRP $27.95 Units EA ARM REST PADS (BLACK, LH) C8TZ PR...MSRP $29.95 Units EA ARM REST PADS (PARCHMENT, RH) C8TZ PR...MSRP $29.95 Units EA ARM REST PADS (PARCHMENT, LH) DOOR CUPS These plastic injected-molded door cups are an exact copy, with the correct-textured surface. Available in black or white C8AZ B...MSRP $21.95 Units PR DOOR CUPS (BLACK) C8AZ W...MSRP $21.95 Units PR DOOR CUPS (WHITE) BRONCO-MAT-FLBK BRONCO-MAT-FTBK B107RH B107LH C8TZ BK MSRP: $ Units: SE FLOOR MAT RUBBER (FRONT) Front Only Quality EPDM rubber with textured surface. MSRP: $ Units: SE FLOOR PANS FLOOR PAN (RH) Right Hand These bronco floor pans are precision-laser cut and feature stiffening ridges and counter sunk body mounting holes for added strength. Made of heavy 16 gauge metal. (Mixing allowed) MSRP: $79.95 FLOOR PAN (LH) Left Hand These bronco floor pans are precision-laser cut and feature stiffening ridges and counter sunk body mounting holes for added strength. Made of heavy 16 gauge metal. (Mixing allowed) MSRP: $79.95 DASH PADS BRONCO DASH PAD This must have accessory is made from high-quality vinyl. The vinyl is vacuum formed and filled with space age urethane to eliminate delamination and cracking. Easy to install. MSRP: $ Find a dealer near you, visit

21 SPEEDOMETER CABLES SPEEDOMETER CABLE An excellent copy of speedometer cable. 73 long. IGNITION CYLINDER & KEYS This ignition cylinder is a quality copy of the original. Includes 2 keys D6TZ A MSRP: $ C5OZ A MSRP: $8.50 SEAT FOAM LEVERS DIRECTIONAL LIGHT LEVER Perfect copies of the originals, with fine chrome plating to replace those rusted or tweaked originals. Soft molded foam, offers correct contours for easier upholstery install. Available in 1966 and versions. Seat upholstery also available C7ZZ A C8TZ A/B C4AZ B MSRP: $7.95 * STEERING COLUMN COVER BRONCO STEERING COLUMN COVER An exclusive product from Scott Drake, this must have accessory is made from high-quality ABS plastic, and features a raised Bronco Script logo. The logo is finished in bright chrome. MSRP: $24.95 LIGHTER SOCKETS LIGHTER SOCKET & RETAINER Mounts behind dash. Socket accepts original style cigarette lighter. MSRP: $4.50 IGNITION & DOOR LOCK SETS IGNITION AND DOOR LOCK SET This convenient kit is made just like the original. Made from die-cast zinc, with stainless steel trim. Includes 2 keys. 66 C5ZZ /1S...MSRP $47.50 Units EA SEAT FOAM C8ZZ /1S...MSRP $47.50 Units EA SEAT FOAM C5AZ BA 66 C1DZ SEAT ADJUSTMENT KNOBS SEAT ADJUSTER KNOB Knob to adjust forward and back motion of seat slider MSRP: $3.95 * SEAT BACK ADJUSTING KIT SEAT BACK ADJUSTING KIT Includes pair of chrome screw adjusters, nuts and washers, heavy duty plastic rest plates and attaching screws. MSRP: $9.95 * Units: KI SEAT RETAINER CLIPS SEAT HINGE SHAFT RETAINER CLIP SET Special clip used to secure front seat back to seat bottom. Two required per seat C5DZ A MSRP: $32.95 * Units: SE SK MSRP: $1.95 * Units: SE... or call

22 SEAT STOP BUMPER KITS SEAT STOP BUMPER KIT 4 BUMPERS WITH HARDWARE These seat bumpers install between the seat bottom and seat back. SEAT LATCH HANDLE & BEZEL SETS Exact detail and beautiful chrome. These handles & bezels are commonly pitted, broken or missing. Our 6 piece kits do both front seats C8ZZ /1 MSRP: $7.95 * Units: KI SEAT HINGE WASHERS FRONT SEAT WASHERS Install on seat hinge shaft between the seat and hinge to prevent hinge from wearing through upholstery. (C8AZ /72A pictured) C8AZ /72A... MSRP $21.95 * Units KI Seat Latch Handle & Bezel Set C9AZ A...MSRP $23.95 * Units SE Seat Latch Handle & Bezel Set BULK HOG RING PACKS S MSRP: $2.95 * Units: SE Metal hog ring packs for easier upholstery installation. 150 piece pack contains enough to complete 1 upholstery set, while the bigger 500 piece pack contains enough for multiple projects. SEAT HINGE REPAIR BRACKET D7ZZ-69618C46-A SEAT HINGE REPAIR BRACKET (LH, INNER) A very common breaking point can now be easily repaired MSRP: $29.95 * SEAT HINGE COVERS Plastic-injected seat hinge cover plate, with correct surface texture. Our covers come in a 4 piece set K...MSRP $3.95 Units KI HOG RING BULK PACK PCS S...MSRP $7.50 Units KI HOG RING BULK PACK PCS UPHOLSTERY INSTALLATION KITS PLIERSET-E HOG RING UPHOLSTERY INSTALLATION KIT ECONOMY Our economy upholstery installation kit features simple pliers with vinyl dipped handles. 150 hog rings included (enough to complete 1 upholstery set). MSRP: $6.95 Units: KI C8TZ /5B... MSRP $34.95 Units SE Seat Hinge Covers (Black) C8TZ /5N... MSRP $34.95 Units SE Seat Hinge Covers (Neutral) PLIERSET-M PLIERSET-P HOG RING UPHOLSTERY INSTALLATION KIT MEDIUM DUTY Our medium duty upholstery installation kit features upgraded cast pliers and 150 hog rings (enough to complete 1 upholstery set). MSRP: $12.95 Units: KI HOG RING UPHOLSTERY INSTALLATION KIT PROFESSIONAL Our professional upholstery installation kit includes professional-grade spring-loaded vinyl-dipped handles, with an extra wide grip to help reduce hand fatigue. Includes 150 hog rings (enough to complete 1 upholstery set). MSRP: $21.95 Units: KI 22 Find a dealer near you, visit

23 Exterior Bronco Mirrors These incredible exterior bronco mirrors from Scott Drake are an exact reproduction of the original, not just another close copy. Made from high-quality pressure-die-cast zinc, and finished with our extra-durable, super-smooth tripple-nickle chrome plating. Mirrors contain superior quality mirror glass, with convex glass in the righthand model for improved field of view. Mirrors include pad and mounting hardware. Hand assembled, inspected and packaged in the USA. With the attention to detail we ve given these mirrors, you can be sure you ll be buying a part that will give you years of excellent service. MSRP LH: $54.95 RH: $ Left Hand Exterior Bronco Mirror C7TZ M Right Hand Exterior Bronco Mirror (w/convex glass) C7TZ C Right Hand model also available SUN VISORS Made from high quality heavy duty vinyl. Very close attention was paid to detail. SUN VISOR TIPS SUN VISOR TIPS (PAIR) Rubber Tip Fits On The End Of The Visor Pin C7TZ BK...MSRP $80.00 Units PR Sun Visors (Black) C7TZ PR...MSRP $80.00 Units PR Sun Visors (Parchment) VISOR ROD SETS Visor rod is bent and formed just like the original. Available in either zinc-plated finish or in polished 304 stainless steel D1DZ A C0AF-13A719-B MSRP: $2.00 * Units: PR DOME LAMP ASSEMBLIES DOME LAMP ASSEMBLY Our dome light assembly is designed to replace the original dome light. We made a bright chrome base with a brighter than original bulb to really improve lighting inside the car. Includes mounting hardware, electrical connectors, and our reproduction dome lens and chrome bezel to make this a quick and simple project. MSRP: $24.95 * Units: KI C6TZ /1A...MSRP $24.95 Units PR VISOR RODS (ZINC SILVER FINISH) - (SET OF 4) C6TZ /1S...MSRP $34.95 Units PR VISOR RODS (STAINLESS STEEL) - (SET OF 4)... or call

24 DOME LAMP HOUSINGS DOME LAMP HOUSING Plastic injected, dome lamp housing, with quality chrome plating. Bulb included. ADJUSTABLE REAR VIEW MIRRORS These rear-view mirrors feature a day and night adjustment lever. Available in both a high-quality Scott Drake reproduction version, and a aftermarket version for price-conscious customers D6UZ A MSRP: $18.95 DOME LAMP LENSES DOME LAMP LENS White dome lamp lens, injection-molded plastic C7AZ G...MSRP $49.95 Units EA ADJUSTABLE REAR VIEW MIRROR - High Quality Scott Drake Reproduction. With day/night adj C8AZ A... MSRP $28.95 * Units EA ADJUSTABLE REAR VIEW MIRROR - Aftermarket. With day/night adj. ACCELERATOR PEDALS ACCELERATOR PEDAL D1AZ B MSRP: $9.95 An exact copy of the original accelerator pedal. Rubber molded with steel insert C0AZ A LAMP MOUNTING BRACKETS UNDERDASH COURTESY LAMP BRACKET Zinc-plated stamped-metal bracket mounts under dash. Exact detail of the original. Socket not included. MSRP: $8.95 MIRROR MOUNTING & BRACKETS C2SZ F REAR VIEW MIRROR ARM Forged arm with correct satin-chrome surface. Two piece construction. Special locking mounting screws included. MSRP: $15.95 Units: SE REAR VIEW MIRROR BRACKET Special cast-metal bracket glues to windshield. Plain finish C5AZ-9735-D MSRP: $13.95 BRAKE & CLUTCH PEDAL PADS Made from high-quality E.P.D.M. molded rubber. Available in standard style like the original, or with raised Bronco script molded into pads for an extra special touch. (Original Design w/o Bronco Script) B7A-2457-A...MSRP $4.95 Units EA BRAKE & CLUTCH RUBBER PADS - ORIGINAL DESIGN C6TZ-2457-A...MSRP $9.95 Units EA BRAKE & CLUTCH RUBBER PADS - BRONCO SCRIPT C6TZ-2457-B...MSRP $12.95 Units EA Bronco Script Brake Pedal Pad (Auto Trans) FRONT BUCKET UPHOLSTERY Precision made from the same heavy duty vinyl and attention to detail originally used by Ford. Heavy 32 ounce vinyl and solid well cord. Patterns are die cut for precision. Kits do not include hog rings for installation C8AZ A MSRP: $7.95 * (Picture for reference only. Actual pattern is different) BR-FRONT-BK...MSRP $ Units PR Front Bucket Seat Upholstery (Black) BR-FRONT-PR...MSRP $ Units PR Front Bucket Seat Upholstery (Parchment) 24 Find a dealer near you, visit

25 REAR BENCH UPHOLSTERY Precision made from the same heavy duty vinyl and attention to detail originally used by Ford. Heavy 32 ounce vinyl and solid well cord. Patterns are die cut for precision. Kits do not include hog rings for installation. UNDERCOATING AccuMatch automotive undercoatings are designed for complete undercarriage protection and sound-deadening. Available in either a standard asphalt-based formula, and also in our new rubberized formula for extra protection and sound-deadening properties. Undercoatings come in extra large 18oz cans for even the biggest jobs BR-REAR-BK...MSRP $ Units PR Rear Bench Seat Upholstery (Black) BR-REAR-PR... MSRP $ Units PR Rear Bench Seat Upholstery (Parchment) RESTORATION SUPPLIES RP MSRP $9.95 * Units EA AccuMatch Undercoating, Rubberized Undercoating (Black) RP MSRP $8.95 * Units EA AccuMatch Undercoating, Chassis Undercoating (Black Asphalt) DETAIL PAINT KITS ENGINE PAINT AccuMatch High-Quality Spray Paint (12 oz can). AccuMatch Engine Paints are a complete line created specifically for engine compartment applications. Engine paints come with higher heat tolerances (up to 350 F) to resist cracking and flaking, and are chemical resistant to corrosion from common engine compartment fluids such as gasoline and brake fluid. Formulated to colormatch original OEM shades. EP-0046-A... MSRP $6.95 * Units EA AccuMatch Engine Paint (Engine Light Blue) EP-1724-A... MSRP $6.95 * Units EA AccuMatch Engine Paint (Engine Black) EP-1923-A... MSRP $6.95 * Units EA AccuMatch Engine Paint (Engine Dark Blue) HI-TEMP CAST IRON PAINT APK-DK-1 AccuMatch Detail Paint Kit (5 Pack) AccuMatch Detail Paints are available in these convenient kits. Each 5-pack kit contains: 2 cans of our OEM Detail Black, 1 can of Cast Iron gray, 1 can of Cast Aluminum, and 1 can of Steel Gray. This kit is perfect for metal touch up projects. MSRP: $52.95 * Units: KI DETAIL PAINT Metal Detail Paints from AccuMatch are formulated with shades which closely match original metal finishes. Ideal for many exterior and underhood/chassis components. Paints provide extra protection against rust and corrosion to help prolong the life of your vehicle s valuable components. RP-102 AccuMatch Hi-Temp Paint, Gray The Hi-Temp Gray paint from AccuMatch Products, is formulated specifically to withstand high engine compartment temperatures (up to 1200 F). Leaves pieces with a natural cast-iron finish with fewer applications due to its extra-high pigment content. Perfect for headers & exhaust manifolds.. MSRP: $9.95 * UNDER HOOD PAINT KITS AccuMatch Under Hood Paint Kit (5 Pack) AccuMatch Detail Paints are available in these convenient kits. Each 5-pack kit contains one of each of the following: Dark Blue Engine Paint, OEM Detail Black, Hi-Temp Cast Iron Gray, Steel Gray and Cast Aluminum RP MSRP $8.95 * Units EA AccuMatch Metal Detail Paint, Steel Gray RP MSRP $8.95 * Units EA AccuMatch Metal Detail Paint, Cast-Iron Gray RP MSRP $8.95 * Units EA AccuMatch Detail Paint, OEM Detail Black RP MSRP $8.95 * Units EA AccuMatch Metal Detail Paint, Cast Aluminum APK-UH-1923 MSRP: $44.95 * Units: KI... or call

26 SUSPENSION COIL SPRING RETAINERS & PLATES Scott Drake now offers coil spring retainers and plates in painted natural gray to resist rust or highly polished stainless steel to catch the eye. All of these are precision formed out of heavy gauge steels C6TZ-5B300-A...MSRP $18.95 Units EA Lower Coil Retainer (Gray) C6TZ-5B300-AS...MSRP $24.95 Units EA Lower Coil Retainer (Stainless Steel) C6TZ-5B300-B...MSRP $4.95 Units EA Upper Coil Plate Retainer Bracket (Gray) C6TZ-5B300-BS...MSRP $6.95 Units EA Upper Coil Plate Retainer Bracket (Stainless Steel) D1TZ-5A307-A...MSRP $22.95 Units EA Coil Spring Seat (Gray) D1TZ-5A307-AS...MSRP $29.95 Units EA Coil Spring Seat (Stainless Steel) TRANSMISSION & DRIVETRAIN 3 SPEED AND AUTO TRANSMISSIONS Made out of Nylon. Please confirm teeth count and direction of teeth. Color codes do not guarantee direct replacement. 4 speed Toploaders have reversed tooth direction. Speedometer gears are not returnable C0DD B... MSRP $13.95 * Units EA Speedometer Gear (18 teeth yellow, fits 3 speed and automatic) C0DZ A... MSRP $13.95 * Units EA Speedometer Gear (16 teeth wine, fits 3 speed and automatic) C0DZ B... MSRP $13.95 * Units EA Speedometer Gear (19 teeth pink, fits 3 speed and automatic) C0DZ C... MSRP $13.95 * Units EA Speedometer Gear (17 teeth wine, fits 3 speed and automatic) C0DZ D... MSRP $13.95 * Units EA Speedometer Gear (21 teeth, fits 3 speed and automatic) C1DZ A... MSRP $13.95 * Units EA Speedometer Gear (20 teeth black, fits 3 speed and automatic) 4 SPEED TOPLOADER Made out of Nylon. Please confirm teeth count and direction of teeth. Color codes do not guarantee direct replacement. 4 speed Toploaders have reversed tooth direction. Speedometer gears are not returnable C2DZ A... MSRP $13.95 * Units EA Speedometer Gear (18 teeth, fits 4 speed Toploader) C2DZ B... MSRP $13.95 * Units EA Speedometer Gear (19 teeth, fits 4 speed Toploader) C2DZ C... MSRP $13.95 * Units EA Speedometer Gear (20 teeth, fits 4 speed Toploader) C2DZ D... MSRP $13.95 * Units EA Speedometer Gear (21 teeth, fits 4 speed Toploader) C2DZ G... MSRP $13.95 * Units EA Speedometer Gear (17 teeth purple, fits 4 speed Toploader) C2DZ J... MSRP $13.95 * Units EA Speedometer Gear (16 teeth orange, fits 4 speed Toploader) C6OZ-7A533-C D6TZ A CLUTCH ROD FIREWALL SEALS FIREWALL CLUTCH ROD SEAL Made from molded E.P.D.M. rubber. Fits right, and looks like original. MSRP: $13.95 * SPEEDOMETER CABLES SPEEDOMETER CABLE An excellent copy of speedometer cable. 73 long. MSRP: $31.95 BRAKE & CLUTCH PEDAL BUSHINGS BRAKE & CLUTCH PEDAL BUSHING Nylon plastic injected. Correct original design B7AZ-2471-A MSRP: $ Find a dealer near you, visit

27 CLUTCH FORK PIVOTS CLUTCH FORK PIVOT WITH MOUNTING SCREWS Heavy duty, metal-stamped construction. Zinc finish. FLY WHEELS FLY WHEEL (164 TEETH) Fits A high-quality, 164 teeth aftermarket fly wheel at a fantastic price B9AZ-7522-B MSRP: $ C6TZ-6375-C MSRP: $ CLUTCH ROD BUSHINGS TRANSMISSION REBUILD KITS C0AZ-7526-B CLUTCH ROD BUSHING Nylon plastic injected. Correct original design. MSRP: $2.95 Units: PR C5ZZ-7005-R4T Manual Transmission Master Rebuild Kit Master rebuild kits include brass synchro rings, input and output oil seals, tailshaft bushing, input and output bearings and all paper gaskets. Most also include thrust washers, needle bearings and small parts kit. Please refer to photo for contents of each kit. MSRP: $ * Units: KI EQUALIZER BAR REPAIR KITS EQUALIZER BAR REPAIR KIT (3 SPEED MANUAL TRANS) Includes felt washers, nylon ball bushings, washer and clevis clips C1DD-7543-KIT MSRP: $13.95 Units: KI Prices subject to change... or call

28 THE DRAKE AUTOMOTIVE GROUP FAMILY OF COMPANIES Scott Drake Enterprises has been in business for over 25 years, and in that time the company has grown to become the most recognized name in the vintage Mustang restoration market. Using the experience gained in this market, Scott Drake Enterprises has expanded to form Drake Automotive Group ; and now offers parts for new-model Mustangs, Challengers, Jeeps, and vintage Broncos with more product lines on the way including Camaro and FJ Cruiser. Commitment to quality is the #1 priority for Drake Automotive Group and it s family of companies. Every part the companies manufacture is painstakingly designed, engineered and tested to ensure the best fit, durability and quality. And every part they resell, is handpicked from the top names in the industry, providing you with only the best parts available. THE MUSCLE CAR WARS ARE BACK and Drake Muscle Cars is here to help you separate yourself from the pack. Drake Muscle Cars is dedicated to providing the finest in aftermarket performance and styling parts. Parts we are working on include billet & carbon fiber accessories in addition to exhaust, brake upgrade systems, and more. Contact our sales staff at or visit for Mustang parts, or for updates on the upcoming Challenger & Camaro aftermarket lines. 130 Cassia Way Henderson, NV USA t: f: