GLOBAL PRODUCTS CATALOG

Size: px

Start display at page:

Download "GLOBAL PRODUCTS CATALOG"

Corey Flowers
5 years ago
Views:

GLOBAL PRODUCTS CATALOG IMPCO Technologies, Inc.

3 Table of Contents Global Locations & IMPCO Brands Tools & Training Service Parts About IMPCO Regulators Mixers Fuel & Engine Management Repair Kits Fuel Lockoffs Product Line About IMPCO... i - ii IMPCO Products Products Line... 1 Mixers Regulators Fuel & Engine Management Products Fuel Lockoffs Repair Kits Service Parts Tools & Training Global Locations IMPCO Brands... 86

About IMPCO i About IMPCO About IMPCO IMPCO is the World s leading source of advanced alternative fuel systems technology and components for internal combustion engines.

4 About IMPCO i About IMPCO About IMPCO IMPCO is the World s leading source of advanced alternative fuel systems technology and components for internal combustion engines. IMPCO products enable these engines to function using environmentally friendly gaseous fuels such as propane, natural gas and biogas. IMPCO products optimize efficiency and performance while reducing emission to the lowestlevels. IMPCO is a major supplier to original equipment manufacturers in the automotive, materials handling industrial and power generation industries. IMPCO supports its global aftermarket through a network of more than 400 Distributors and Service Parts Organizations. World headquarters are located in Cerritos, California, IMPCO has key offices and facilities worldwide including: North America, Central America, South America, India, Egypt and the Pacific Rim. It operates in the Netherlands, France, Germany and the United Kingdom as IMPCO-BERU Technologies, B.V. IMPCO Technologies, Inc. trades publically on the Nasdaq under the symble IMCO. Power Generation Bus & Truck Industrial Automotive Power Generation Bus & Truck Industrial

Transportation Market IMPCO does business in three, key growth market segments:

We design, manufacturer and market components, complete fuel systems, engine management

emission packages, powertrain systems, service part programs and technical training.

5 ii About IMPCO IMPCO sells products in the: Industrial Market Power Generation Market Transportation Market IMPCO does business in three, key growth market segments: Transportation; Industrial; and Power Generation. We design, manufacturer and market components, complete fuel systems, engine management controls, electronic control products, engine dress, services, integrated and certified emission packages, powertrain systems, service part programs and technical training. Our market segments contain diverse applications, from: small one-cylinder scooters and low displacement automobiles to forklifts, wood chippers and welders to large portable and stationary power generators used to keep the lights and power flowing.

Product Lines 1 PRODUCT LINES Products: Product Line Catalytic Converters - IMPCO Technologies offers a wide range of metallic catalytic converters for industrial applications.

6 Product Lines 1 PRODUCT LINES Products: Product Line Catalytic Converters - IMPCO Technologies offers a wide range of metallic catalytic converters for industrial applications. Converters with mufflers are also available, as well as customer catalyst bricks for special applications. Conversion Kits - For OEM s and distributors we develop gaseous fuel systems. From complete systems including catalysts to a more basic retrofit LPG conversion. After development we offer and supply complete assembled kits. Contact your local IMPCO office for details. Fuel Management Systems - All IMPCO gaseous fuel systems can be fitted with a closed-loop control. Dependent on the requirements and specifications, we develop and produce a custom-made system. LP Gas Tanks - IMPCO Technologies offers a range of tanks for different countries and applications. We offer a number of fixed tanks, including the required certifications. Contact your local IMPCO office for details. Model 55 Series Carburetor - The Standard model can be mounted in either an updraft, downdraft, or sidedraft oreintation, supplying either LPG or natural gas to engines from 1 to 52 kw (1.5 to 70 hp). The maximum flow rate is 54.2 L/s (115 cfm). Various SAE flanges and air horn sizes are available. Model 60 Series Carburetor - The new 60 Series mixer incorporates a Delrin air valve, reducing weight, thus improving sensitivity, as well as improving durability. It is tamper proof, in that all idle adjustments are recessed and inaccessible to the user. The one thing that has not changed is the mixer design s proven resistance to fuel impurities and clogging. Model CA 100 Series Carburetor - The Model 100 Series is a single diaphragm air-gas valve carburetor/mixer. It offers a 90 air inlet to provide low overhead clearance, and is available with several air horn and throttle body options. This unit is available for propane, natural gas and digester gas applications.

7 2 Product Lines Model 125 Series Carburetor - The Model 125 carburetor is a single-diaphragm air valve carburetor / mixer. It offers a downdraft air inlet that can be used for remote air filtration or open-element type air filters. This unit is available for propane, natural gas, and digester gas applications. Model 200 / FB200 Series Carburetor - The Model 200 Series is a single diaphragm air-valve carburetor / mixer. It offers a 90 air inlet to provide low overhead clearance, and is available with several air horn and throttle valve options. This unit is available for propane, natural gas and digester gas applications. It has been successfully used for other hydrocarbon-based vapor fuels as low as 500 BTU. Model 200 D Series Carburetor - Designed for several combustion strategies, such as standard burn-stoichiometric-feedback and it is fully adjustable. It s interchangeable air horn adapters and interchangeable throttle bodies with improved PTFE bearing design make it readily adaptable. Heavy duty product. Model 200 T Series Carburetor - Designed for several combustions strategies, such as standard burn-stoichiometric-feedback, it is also fully adjustable. The 200T is readily adaptable with interchangeable air horn adapters and interchangeable throttle bodies with improved PTFE bearing design. Heavy duty product. Model 225 Series Mixer - The Model 225 carburetor is a single-diaphragm air valve carburetor / mixer. It offers a downdraft air inlet that can be used for remote air filtration or open-element type air filters. This unit is availale for propane, natural gas, and digester gas applications. It has been successfully used for other hydrocarbon-based vapor fuels as low as 500 BTU. Model 300 Series Mixer - The Model 300 carburetor is a complete mixer without air filter. It has dual air filter capabilities of both 10 and Varifuel Carburetor - The IMPCO 400 VARIFUEL (400VF3) is a gaseous fuel carburetor of the concentric flow, air valve type. A precision gas metering valve is attached to the air valve. The air valve (and gas valve) motion is linear in relation to volumetric flow. The air/fuel ratio is controlled by the adjustable power valve, shape of the gas metering valve, and the pressure from the gas regulator. The 400VF3 has anti-wear guide bushings for the air valve assembly. Heavy duty product. Model 425 Series Mixer - The Model 425 carburetor is a standard mixer with standard or optional throttle bodies.

8 Product Lines 3 Model 600 Series Mixer - The Model 600 series is designed for several combustion strategies. It has standard burn-stoichiometric feedback and is fully adjustable. The Model 600 is readily adaptable with interchangeable air horn adapters and interchangeable throttle bodies. The carburetor flow rate is 960 CFM. Heavy duty product. Product Line Model 600D Series Carburetor -The Model 600D series is designed for several combustion strategies. It has standard burn-stoichiometric feedback and is fully adjustable. The Model 600 is readily adaptable with interchangeable air horn adapters and interchangeable throttle bodies. The carburetor flow rate is 1600 CFM. Heavy duty product. BeamGarretson 1436 Carburetor Adapter - The Beam 1436 uses Venturi 113. BeamGarretson 1451 Carburetor Adapter - The Beam 1451 uses Venturi 113. BeamGarretson 4C-314 Carburetor Adapter - Model E Series Regulator - The IMPCO Model E & PE Series are two-stage regulators/converters. Engine coolant heat is used to assist liquid fuel vaporization. Diagnostic test ports are standard for both the primary and secondary pressure chambers, and a choice of diaphragm materials is available. E & PE Series regulator/converters are renewable with the appropriate repair kits. Model EV & PEV Series Regululator - The IMPCO Model PEV & EV Series are two-stage regulators/converters. They are intended for vapor withdrawal systems. Heating with engine coolant is not required. Diagnostic test ports are standard for both the primary and secondary pressure chambers, and a choice of diaphragm materials is available. EV & PEV Series regulator/ converters are renewable with the appropriate repair kits.

4 Product Lines Model L Series Regulator - The IMPCO Model L is a two stage regulatorconverter.

The L Series regulator provides a negative outlet pressure of -0.37 kpa (-1.5 w.c.). No optional pressures are available.

Regulatory approvals include UL, ULC, E4 Regulation Number 67.

9 4 Product Lines Model L Series Regulator - The IMPCO Model L is a two stage regulatorconverter. These units are coolant heated and are able to provide liquid vaporization to supply up to 150 kw (200 hp) in industrial engine applications. The L Series regulator provides a negative outlet pressure of kpa (-1.5 w.c.). No optional pressures are available. The Model L offers economical performance with full features; rear fuel inlet, primary and secondary diagnostic test ports. Optional silicone diaphragm materials are also available. Regulatory approvals include UL, ULC, E4 Regulation Number 67. Model J Series Regulator - The IMPCO Model J Series converters deliver superior performance and excellent pressure output consistency throughout service life. Three vapor outlet pressures are available. Use of the standard blue secondary spring provides negative 0.37 kpa (-1.5 inches w.c.). The optional orange secondary spring provides negative 0.12 kpa (-0.5 inch w.c.). Model Cobra Series - The new COBRA Two-stage Converter/Pressure Regulator has been specifically designed to meet the performance requirements of demanding OEM applications in materials handling, portable and stationary engines, ground support equipment, agricultural, and construction equipment. For use with SPECTRUM. Model PJ Series Converter - The Model PJ Series is a positive pressure twostage regulator. It is designed for positive pressure CNG fuel systems where liquid vaporization and engine coolant heating is not required. These regulators are able to provide positive flow in applications up to 59.7 kw (75 hp). PJ regulators are available in several fixed pressures. Adjustable pressure units are also available in varying pressure ranges. Fixed regulators can be converted in the field to adjustable with the AC1-74 kit. Additionally, adjustable units can be converted to fixed pressure by using the H3-3 spring cover. Fixed pressure regulators are preferred in applications that are not subject to fuel quality variations or to deter unauthorized tampering. There is a primary pressure test port and left or right fuel outlets. Optional diaphragms are available in silicone material. Model HPR Series Regulator - The HPR-3600 is a single stage high pressure regulator designed for high pressure CNG (compressed natural gas) systems. This regulator is engine coolant heated to prevent freezing and has dual outlet ports for universal installation flexibility. The HPR is rated up to 24,800 kpa (3,600 psi) inlet and provides a regulated outlet pressure of 1,030 ± 140 kpa (150 ± 20 psi) which makes it compatible with the IMPCO P (positive) type regulators. It is also supplied with an external pressure relief valve which is calibrated to open if outlet pressure exceeds 2,760 kpa (400 psi). Regulatory approvals include UL and AGA/CGA. TUV certification is available with the 989C model only.

Product Lines 5 Model IMP Series Regulators - The IMPCO IMP Series of regulators are low pressure, dry gas regulators intended for use with propane or natural gas.

Product Line The IMP Series regulators feature a unique concical valve design, which permits low resistance straight-through flow.

Model C250AH Series Regulator - The replacement for the Algas C250 regulators is the model C250AH.

10 Product Lines 5 Model IMP Series Regulators - The IMPCO IMP Series of regulators are low pressure, dry gas regulators intended for use with propane or natural gas. Typical applications include all types of stationary, gas-fired appliances and equipment utilizing a low-pressure gas supply. Product Line The IMP Series regulators feature a unique concical valve design, which permits low resistance straight-through flow. This design provides high flow at low inlet pressures, and enables the regulators to handle large capapcitiy applicances with limited supply pressure. Model C250AH Series Regulator - The replacement for the Algas C250 regulators is the model C250AH. The C250 family of LPG converters is a system of highly compact components that cover the entire range of automotive and industrial applications from 15 to 240 horsepower.. The all new AHR50D air heated regulator is the result of 44 years of advanced engineering. Designed for smaller displacement engines. The AHR50-D is a direct replacement for the Century G-85A regulator. Developed for air-cooled engine applications, this regulator is at home on portable welders, pumps, wood chippers, pressure washers, sweepers, mobile construction equipment, airport ground support equipment, portable power generators to name a few. Model 202 Series Regulator - The BeamGarretson Model 202A is a high capacity secondary dry gas pressure regulator designed for OEM and field conversions to propane or natural gas where the fuel is available at the appropriate inlet pressures. Model 120A Series Converters - The BeamGarretson Model 120A is a twostage, high capacity liquid gas pressure regulator designed for use with propane. It contains both a primary and a secondary chamber, and operates at tank outlet pressure. The 120A is suitable for factory and field conversions using vapor withdrawal up to the unit s rated capacity. Model T50/T60 Series Converter - The BeamGarretson Model T50/T60 is a two-stage, tamper-resistant, liquid gas pressure regulator designed for use with propane. It contains both a primary and secondary chamber, and operates at tank outlet pressure. The T50/T60 is suitable for OEM and field conversions using liquid withdrawal up to the unit s rated capacity of 60 hp. It features tamperresistant idle and primary pressure adjustment screws.

11 6 Product Lines 11 Series Vaporizer - The 11 Series Vaproizers are easy and economical to install and service. The 11A17is a non-adjustable, air heated positive pressure vaporizer that is compatible with either vapor or liquid. 11A27 Vaporizer - The 11A27 is a non-adjustable, water heated positive pressure vaporizer. Eliminates mounting brackets and external water line. Model KN Secondary Regulator - The BeamGarretson Model KN is a secondary regulator designed for sensitivity and simple operation. It is used with low pressure vaporized gaseous fuels. Because of its extreme sensitivity, the KN offers excellent results in remote starting applications (standby power generators, etc.). With proper installation and maintainance the KN can provide years of trouble-free service. Model SD Secondary Regulator - The BeamGarretson Model SD is a secondary regulator designed for use with low pressure vaporized gaseous fuels. The molded silicone-rubber diaphragm and square-seating molded plunger contribute to the unit s and long trouble-free service. Commander CDP-1dx-4 and -6 Series - Engineered for accurate fuel control and reliability, the COMMANDER 1dx series offers especially designed digital controllers for OEM material handling equipment and industrial applications. Vital links in a complete systems approach, these controllers are enginneered to work with IMPCO fuel system products.

Product Lines 7 Product Line Model VFF30 Vacuum Fuelock Filter - The IMPCO VFF30 is a combination fuel lockoff and filter engineered for use with LPG or natural gas. A pressure of 1.69 kpa (0.

12 Product Lines 7 Product Line Model VFF30 Vacuum Fuelock Filter - The IMPCO VFF30 is a combination fuel lockoff and filter engineered for use with LPG or natural gas. A pressure of 1.69 kpa (0.5 Hg) is required to open the lockoff. The VFF30 is suitable for engines up to 242 kw (325 hp) at a maximum working pressure of 2,150 kpa (312 psi). The filter element is fully serviceable. FL-205 Fuel Lockoff - The FL-205 is a normally closed, 12 VDC electric solenoid shutoff valve suitable for use with propane or natural gas. The FL-205 can be used with IMPCO, Beam/Garretson fuel management systems. FL-206 Fuel Lockoff - The FL-206 is a normally closed, low pressure 12 VDC electric solenoid shutoff valve suitable for use with gasoline. The FL-206 can be used with IMPCO, Beam/Garretson fuel management systems. FL V Fuel Lockoff - The FL V is a heavy-duty, normally closed, 12 VDC electric solenoid shutoff valve with an integral filter. It is suitable for use with propane, and can be used with IMPCO, Beam/Garretson fuel management systems. The built-in fuel filter features a replaceable element. FL-219 Fuel Lockoff - The FL-219 is a normally closed, 12 VDC electric solenoid shutoff valve with an integral filter. It is suitable for use with propane and natural gas, and can be used with IMPCO, Beam/Garretson fuel management systems.

13 8 Product Lines FL V Fuel Lockoff - The L V is a normally closed, 12 VDC electric solenoid shutoff valve suitable for use with propane. It can be used with IMPCO, Beam/Garretson fuel management systems. FL V Fuel Lockoff - The FL V is a heavy-duty electric shutoff solenoid valve with an integral filter. The solenoid is 12-volt operated and normally closed. The replaceable filter element allows the fuel to be filtered before it enters the system components. The FL V can be used in conjunction with any IMPCO, Beam Garretson fuel management systems. Model RK-VFF30-2 Repair Kit - The cutaway of our VFF30 shows assembly of valve spring, valve seat, valve operating pin, seal retaining washer and O ring seal. The Spectrum integrated throttle body and governor provides a building block approach to total engine management. This modular design consists of a cast aluminum throttle body plus a fully programmable integrated digital speed control and bi-directional actuator. Fuel Tubes / Spud-Ins - The fuel tube, or spud-in, is one of the original conversion methods. BeamGarretson 1501-L - Microvac safety switch.

The air is accelerated by a restriction (venturi) in the throat diameter of the carburetor.

14 Product Lines 9 Product Line BeamGarretson 1501-PA - Vacuum switch kit, includes wires, terminals and fittings. Venturi - A quantity of air is drawn through a carburetor by the aspiration of the engine. The throttle valve controls the amoutn of air entering the engine. The air is accelerated by a restriction (venturi) in the throat diameter of the carburetor. The reduction in cross-secrion of the venturi increases the air velocity which creates a vacuum at the restriction point. FGA-4000 Four-Gas Analyzer System - An accurate, easy-to-operate analyzer, the FGA-4000 exhaust test system allows you to efficiently measure HC, CO, CO 2 and O 2. This compact, portable unit is lightweight, simple to use, and accurate enough to meet strict international OIML standards. With the addition of a few parts, it can easily be upgraded to measure NO x. Diagnostic Equipment - Like all fuel systems, IMPCO gaseous fuel systems must be adjusted and checked with the right equipment. We offer several different kinds of testing tools for both open and closed-loop fuel systems. ITK-1 Diagnostic Equipment - IMPCO has developed the popular ITK-1 TM Pressure Testing System to address misdiagnosis and trouble shooting efforts on LPG and NG fuel systems. FSA-1000 Test Equipment & Tools - Proper diagnosis of closed-loop feedback systems is paramount to ensuring that the engine performs its best while reducing exhaust emissions. Proper servicing can result in satisfied customers and higher repair profits.

15 10 Product Lines Catalogs & Manuals are available for free downloading when you visit

IMPCO Mixers 11 MODEL 55 SERIES CARBURETORS & MIXERS Standard Carburetor for CNG & LPG Fuels The Standard model can be mounted in an updraft, downdraft, or sidedraft oreintation, supplying wither LPG

16 IMPCO Mixers 11 MODEL 55 SERIES CARBURETORS & MIXERS Standard Carburetor for CNG & LPG Fuels The Standard model can be mounted in an updraft, downdraft, or sidedraft oreintation, supplying wither LPG or natural gas to engines from 1 to 52 kw (1.5 to 70 hp). The maximum flow rate is 54.2 L/s (115 cfm). Various SAE flanges and air horn sizes are available. Mixers 1-1/4" SAE flange, 2-1/16" air horn... CA /16" air horn, 2-1/16" hose, lean air/gas... CA SAE flange, 2-1/16 air horn, special lean valve assy...ca /4 SAE flange, 3/4 SAE flange, 1-1/2 airhorn...ca SAE flange, 1-1/2 air horn...ca SAE flange, 1-1/2 air horn, lean air gas valve assy...ca SAE flange, A machined to 1.97 O.D....CA SAE flange, 1-5/8 air horn...ca SAE flange, 1-5/8 air horn, lean air gas valve assy...ca SAE flange, 2-1/16 air horn, rich air gas valve assy...ca /8 hose, 1-7/8 air horn w/lifter...ca55-256l 2-1/16" hose, 2-1/16" air horn without lifter...ca /16" air horn, 2-1/16" hose, dual fuel, with lifter...ca55-258l 1" SAE flange, A straight air horn, long shaft, return spring bkt...ca /4" Sae flange, 1-3/4" air horn...ca " SAE flange, 2-1/16" air horn, long shaft, w/a ca /4" SAE flange, 1-5/8" air horn...ca55-4 1" SAE flange, 2-1/16" air horn...ca " SAE flange, 2-1/16" air horn, with vacuum advance...ca /4" SAE flange, 2-1/4" air horn, with drilled shaft...ca " SAE flange, 1-7/8" air horn...ca /4" SAE flange, 2-1/16" air horn...ca /4" SAE flange, 2-5/16" air horn...ca " SAE flange, Toyota...CA " SAE flange, Toyota...CA " SAE flange, w/a2-65 & A3-113 adapters, Toyota...CA " SAE flange, w/a2-65 & A3-113 adapters, lean flow, Toyota...CA /4" SAE flange, with 7" air cleaner...ca Hyster special flange, 43mm air horn, short lever w/throttle return...ca mm flange, 43mm air horn, standard flow... CA " SAE flange, 2-1/16" air horn, special lean valve assy...ca /4" SAE flange, 3/4" SAE flange, 1-1/2" air horn...ca " SAE flange, 1-1/2" air horn...ca55-14

17 12 IMPCO Mixers Product List Price MODEL 55 SERIES CARBURETORS & MIXERS (Continued) 1" SAE flange, 1-1/2" air horn, lean air gas valve assy... CA " SAE flange, A machined to 1.97 O.D...CA " SAE flange, 1-5/8" air horn...ca " SAE flange, 1-5/8" air horn, lean air gas valve assy....ca " SAE flange, 2-1/16" air horn, rich air gas valve assy....ca /8" hose, 1-7/8" air horn w/lifter...ca55-256l 2-1/16" hose, 2-1/16" air horn without lifter...ca /16" air horn, 2-1/16" hose, dual fuel, with lifter...ca55-258l 1" SAE flange, A straight air horn, long shaft, return spring bkt... CA /4" Sae flange, 1-3/4" air horn...ca " SAE flange, 2-1/16" air horn, long shaft, w/a ca /4" SAE flange, 1-5/8" air horn...ca55-4 1" SAE flange, 2-1/16" air horn...ca " SAE flange, 2-1/16" air horn, with vacuum advance... CA /4" SAE flange, 2-1/4" air horn, with drilled shaft...ca " SAE flange, 1-7/8" air horn... CA /4" SAE flange, 2-1/16" air horn...ca /4" SAE flange, 2-5/16" air horn...ca " SAE flange, Toyota...CA " SAE flange, Toyota...CA " SAE flange, w/a2-65 & A3-113 adapters, Toyota...CA " SAE flange, w/a2-65 & A3-113 adapters, lean flow, Toyota...CA /4" SAE flange, with 7" air cleaner...ca Hyster special flange, 43mm air horn, short lever w/throttle return... CA mm flange, 43mm air horn, standard flow... CA mm flange, 43mm air horn, lean flow...ca mm flange, lean flow...ca /4" SAE flange, A2-61 airhorn...ca /4" SAE flange, A2-61 air horn, tapped 8mm, Mitsubishi...CA /2" SAE flange, std. A CA /4" SAE flange, A air horn, tapped 8mm, Clark...CA /4" SAE flange, 2-1/4" air horn, tapped 8mm less levers...ca " SAE flange, 1-7/8" air horn...ca55-6 1" SAE flange, 1-5/8" air horn, w/ 1/4" hole in lever at 1"R, 4" shaft...ca " SAE flange, 1-5/8" air horn, w/ 1/4" hole in lever at 1"R, 4" shaft...ca /8" SAE flange, 1-7/8" air horn, w/lifter... CA55-754L 2-1/16" air horn, 2-1/16" hose, dual fuel, with lifter...ca55-756l 2-1/16" air horn, 2-1/16" hose, dual fuel, light air gas valve spring... CA55-756M 2-5/16" air horn, 2-5/16" hose, dual fuel, with lifter...ca55-758l 1-1/4" SAE flange, 2-1/16" air horn...ca55-8 1" SAE flange, 1-5/8" air horn...ca55-80 Mixer, 1-1/2" air horn...ca55m-1 Mixer, 1-1/2" air horn...ca55m-1-2 Mixer, 1-5/8" air horn...ca55m-2 Mixer, 1-5/8" air horn, lean idle...ca55m-2-2 Mixer, 1-3/4" air horn...ca55m-3 Mixer, 1-7/8" air horn...ca55m-4 Mixer, 1-7/8" air horn...ca55m-4-2 Mixer, 2-1/16" air horn...ca55m-5 Mixer, 2-1/16" air horn, leav valve assy...ca55m-5-2 Series 500, straight draft mixer...ca55m-500 Series 500, straight draft mixer with lean air/gas valve assy....ca55m Series 500, straight draft mixer with lean body, lean full range...ca55m Series 500, straight draft mixer with lean body... CA55M Series 500, straight draft mixer assembly with lifter, dual fuel... CA55M-750L

IMPCO Mixers 13 MODEL 60 SERIES CARBURETORS & MIXERS - Positive & Negative Pressure Standard Carburetor for NG & LPG Fuels The new 60 Series mixer incorporates a Delrin air valve, thus improving

18 IMPCO Mixers 13 MODEL 60 SERIES CARBURETORS & MIXERS - Positive & Negative Pressure Standard Carburetor for NG & LPG Fuels The new 60 Series mixer incorporates a Delrin air valve, thus improving sensitivity, as well as improving durability. Tamper proof are available. Mixers 1-1/2" air horn 3/4" SAE flange Model 60 carb. assy series LPG carb. assy series LPG carb. assy carb., F/Eaton # series carb. F/Yale /4" 60 series carb assy /2" 60 series carb assy Mixer assy. 1-1/2" air horn Mixer assy, 2-1/16" air horn Mixer assy, 1-7/8" air horn /4" 60 series carb assy...pca5714 CT60M-1 - NEW PRODUCT RELEASE Mixer assembly, series 60 open loop with 1-1/2 air horn - Note: This 60 series mixer is shown with an optional electronic governor. FT60M-1 - NEW PRODUCT RELEASE Mixer assembly, series 60 feedback with 1-1/2 air horn - Note: This 60 series mixer is shown with an optional electronic governor. FT60M-3 - NEW PRODUCT RELEASE Mixer assembly, series 60 feedback with 2-1/16 air horn - Note: This 60 series mixer is shown with an optional electronic governor. CT60M-3 - NEW PRODUCT RELEASE Mixer assembly, series 60 open loop with 2-1/16 air horn - Note: This 60 series mixer is shown with an optional electronic governor.

19 14 IMPCO Mixers MODEL CA100, 110 SERIES MIXERS & CARBURETORS Standard Model 100 Carburetor for Natural Gas, LPG & Digester Fuels The Model 100 Series is a single diaphragm air-gas valve carburetor/mixer. It offers a 90 air inlet to provide low overhead clearance, and is available with several air horn and throttle body options. This unit is available for propane, natural gas and digester gas applications. The Model 100 is also available for Feedback applications with the FB designation. The 100 mixer provides a convenient 1/8 NPT balance port and two separate air valve vacuum ports. Additional low speed idle mixture control can be obtained to lean airfuel mixtures through the use of optional shims. 1" SAE flange, 1-1/2" air horn, lean flow... CA " SAE flange, 1-7/8" air horn, lean flow... CA /4" SAE flange, 2-1/16" air horn... CA /4" SAE flange, 2-5/16" air horn, lean flow... CA /4" SAE flange, 2-5/16" air horn, silicone... CA /2" SAE flange, 2-5/16" air horn... CA /2" SAE flange, 2-5/16" air horn, silicone... CA " SAE flange, 1-7/8 air horn... CA /2" SAE flange, 2-5/16" air horn, AL1-7-1 lever, silicone dia.... CA /4" SAE flange, 2-5/16" air horn... CA /4" SAE flange, 2-1/16" air horn, Kalmar A-C... CA " SAE flange, 1-5/8" air horn, lean flow... CA " SAE flange, 1-7/8" air horn, lean flow... CA /4" SAE flange (short), 2-1/16" air horn... CA /6" air horn, 70/75 flow, no throttle assy.... CA100-64G 1-1/2" SAE flange, 2-5/16" air horn, 72/80 flow... CA " SAE flange, 1-1/2" air horn... CA /4" SAE flange, 2-5/16" air horn 72/80 flow, low profile... CA /4" SAE flange, 2-5/16" air horn, lean flow, long shaft,... CA /4SAE flange, 2-5/16 air horn... CA /4 SAE flange, 2-1/16 air horn... CA /4" SAE flange (short), 2-1/16" air horn, lean flow, low profile... CA " SAE flange, 2-1/16" air horn, drilled shaft, AL CA /4" SAE flange, 2-1/16" air horn, lean flow, short shaft...ca /4" SAE flange, 2-1/16" air horn, lean flow, low profile...ca " SAE flange, 2-5/16" air horn, lean flow, with...ca " SAE flange, 2-5/16" air horn, 4-3/4" shaft, flange drilled at...ca " SAE flange, 1-5/8", air horn, w/f4-2 vacuum...ca " SAE flange, 2-1/16" air horn, lean flow...ca /4" SAE flange, 2 1/16" airhorn... CA " SAE flange, 1-1/16" air horn, Yale...CA " SAE flange, 2-1/16" air horn w/bracket & swivel...ca

20 IMPCO Mixers /4" SAE flange, 2-1/16" air horn w/l1-33, Clark...CA /4" & 1-1/2" SAE flange, 2-1/16" air horn, special 5/16" shaft...ca /16" air horn, AA3-67 adapter, Clark...CA /4" SAE flange, 2-5/16" air horn, oilite bearings...ca /4" SAE flange, 2-5/16" air horn...ca /16" air horn, A3-67 adapter, Mitsubishi...CA /4" SAE flange, 2-1/16" air horn, AV air gas valve assembly...ca /4" SAE flange, 2-5/16" air horn, long shaft, NB & IS, 72/80 flow...ca /4" SAE flange, 2-1/16" air horn, 100% flow, Caterpillar...CA /4" SAE flange, 2-5/16" air horn, 2.2L Mazda engine...ca /16" air horn, special levers, lean flow 65/70...CA /4" SAE flange, 2-1/16" air horn, w/spark advance...ca Mixer, 1-1/2" air horn...ca100m-1 Mixer, 1-7/8" air horn...ca100m-2 Mixer, 1-7/8" air horn. lean flow silicone...ca100m-2-2 Mixer, 2-1/16" air horn...ca100m-3 Mixer, 2-1/16" air horn, lean flow, silicone...ca100m-3-2 Mixer, 2-1/16" air horn, lean flow...ca100m-3-9 Mixer, flow with silicone...ca100m Mixer, 2-5/16" air horn...ca100m-4 Mixer, 2-5/16" air horn, lean flow, silicone...ca100m-4-2 Mixer, 2-5/16 air horn special, lean flow - Europe...CA100M-4-9 Mixer, 1-5/8" air horn...ca100m-5 Mixer, 1-5/8" air horn, silicone...ca100m-5-2 Mixer, 2-5/16" air horn, silicone...ca100m-647 Mixer, 2-5/16" air horn, feedback...fb100m-4 1" SAE flange, 1-1/2" air horn /4" SAE flange, 2-2/16" air horn, dash pot, hand primer, silicone /4" SAE flange, 2-5/16 air horn /2" SAE flange, 2-5/16" air horn, oilite bearings, AS3-22 spacer /2" SAE flange, 2-5/16" air horn /4" SAE flange, 1-5/8" air horn, silicone /2" SAE flange, 2-5/16" air horn, lever mounted on left side looking at spark advance, 7/32" dia. holes on 1-1/8" R, downdraft, w/silicone diaphragm /16" air horn, silicone diaphragm, Lister Petter /4" SAE flange, 2-5/16" AH, with AS /2" SAE flange, 2-5/16" air horn, oilite bearings, AS3-22 spacer, AS3-10 spacer Mixer, 1-1/2" AH...110M-1 Mixer, 2-1/16" AH...110M-3 Mixer, 2-1/2" air horn w/silicone...110m-3-2 Mixer, 2-5/16" air horn...110m-4 Mixer, 2-5/16" air horn, silicone diaphragm...110m-4-2 Dash Pot Assembly, Model 110 mixer with hydrin diaphragm...a110-dp Dash Pot Assembly, Model 110 mixer with silicone diaphragm...a110-dp-2 Mixers

16 IMPCO Mixers MODEL 125 SERIES MIXERS & CARBURETORS Standard Model 125 Carburetor for NG, LPG, Digester Gas The Model 125 carburetor is a single-diaphragm air valve carburetor / mixer.

21 16 IMPCO Mixers MODEL 125 SERIES MIXERS & CARBURETORS Standard Model 125 Carburetor for NG, LPG, Digester Gas The Model 125 carburetor is a single-diaphragm air valve carburetor / mixer. It offers a downdraft air inlet that can be used for remote air filtration or open-element type air filters. This unit is available for propane, natural gas, and digester gas applications. 1-1/4" & 1-1/2" SAE flange, 2-5/16" air horn...ca /4" & 1-1/2" SAE flange, 2-5/16" center stud air horn...ca /4" & 1-1/2" SAE flange, 2-5/8" center stud air horn...ca /4" & 1-1/2" SAE flange, 2-7/32" center stud air horn...ca /4" & 1-1/2" SAE flange, to fit 5" air horn...ca /4" &1-1/2" SAE flange, 2-5/16" AH, w/needle bearings...ca /4" SAE flange, 2-5/16" air horn, EV /80 flow...ca /4" SAE flange, 2-5/16" AH...CA /4" & 1-1/2" SAE flange, 80mm air horn, hydrin diaphragm, Nissan...CA /4" & 1-1/2" SAE flange, no air horn, w/bracket & swivel...ca /4" SAE flange, silicone...ca /4" SAE flange (short), 80mm air horn, lever w/clamp on...ca /4" SAE flange (short), 80mm air horn, spring hole R, w/ AV CA /4" SAE flange (short), 80mm air horn,drilled for spring, silicone dia...ca /4" SAE flange, short 2-5/16" air horn...ca /4" SAE flange, 1-1/2 air horn w/as ca /4" SAE flange, 1-1/2 air horn, silicone...ca /4" high profile SAE flange, 2-5/16" air horn, oilite bearings, lean flow...ca /4" low profile SAE flange, 80mm air horn, lean flow, oilite bearings...ca /8" air horn, governed 2V throttle body, Hyster...CA " SAE flange, lean flow...ca Mixer with hydrin diaphragm...ca125m Mixer with silicone diaphragm...ca125m-2 Lean flow mixer with hydrin diaphragm...ca125m-3 Dual fuel, vacuum lift mixer with hydrin diaphragm...ca125m-10 Dual fuel, vacuum lift mixer with silicone diaphragm...ca125m-10-2 Mixer Assembly for CA CA125M-292 Mixer for feedback, with hydrin diaphragm...fb125m Mixer for feedback, with silicone diaphragm...fb125m-2

IMPCO Mixers 17 MODEL 200 / FB200 SERIES MIXERS & CARBURETORS Standard Model 200 Carburetor for NG, Propane, and Digester Gas The model 200 Series is a single diaphragm air-valve carburetor / mixer.

22 IMPCO Mixers 17 MODEL 200 / FB200 SERIES MIXERS & CARBURETORS Standard Model 200 Carburetor for NG, Propane, and Digester Gas The model 200 Series is a single diaphragm air-valve carburetor / mixer. It offers a 90 air inlet to provide low overhead clearance, and is available with several air horn and throttle valve options. This unit is available for propane, natural gas and digester gas applications. It has been successfully used for other hydrocarbon-based vapor fuels as low as 500 BTU. Mixers Product 1-1/2" SAE flange, 2-5/8" air horn with silicone diaphragm /4" SAE flange, 2-5/8" air horn with hydrin diaphragm /4" SAE flange, 2-5/8" air horn with silicone diaphragm /4" SAE flange, 2-5/8" air horn\ w/check valve X 2" SAE flange, 3-1/16" air horn with hydrin diaphragm " SAE flange, 3-1/16" air horn with silicone diaphragm " SAE flange, 3-1/16" air horn, AV w/ball check, silicone, permaglide bearings, internal seals, center bore X-2 1-3/4" SAE flange, 3-1/16" air horn with hydrin diaphragm /4" SAE flange, 3-1/16" air horn with silicone diaphragm Carb, 3-1/16" air horn with check valve X-2 Mixer, 2-5/8" air horn with hydrin diaphragm M-1 Mixer, 2-5/8" air horn with silicone diaphragm M-1-2 Mixer, 3-1/16" air horn with hydrin diaphragm M-2 Mixer, 3-1/16" air horn with silicone diaphragm M-2-2 Digester gas mixer, 2-5/8" air horn with silicone diaphragm... DG200M /8" air horn with hydrin diaphragm for ADP feedback system... FB200M-1 2-5/8" air horn with silicone diaphragm for ADP feedback system... FB200M /16" air horn with hydrin diaphragm for ADP feedback system... FB200M-2 3-1/16" air horn with silicone diaphragm for ADP feedback system... FB200M-2-2 Mixer, feedback, tamper resistant... FB200M-2-2TP Mixer assy for natural gas... NG200M /4" SAE flange, 2-5/8" air, horn, AS3-21 spacer " SAE flange, 3-1/16" air horn with hydrin diaphragm BV1-12 w/ball check, silicone diaphragm, AS3-21 spacer " SAE flange, 3-1/16" air horn, center bore, permaglide bearings, IS, BV1-12 w/ball check, silicone diaphragm, AS3-21 spacer X 2" SAE flange, w/silicone & hand primer /4" SAE flange, 3-1/16 air horn /4" SAE flange, 3-1/16" air horn with silicone diaphragm " SAE flange, 2-5/8" air horn, AS3-21 spacer with AT2-6 throttle body Mixer, 3-1/16" air horn, AS3-21 spacer hydrin diaphragm M-2 Mixer, 3-1/16" air horn, AS3-21 spacer silicone diaphragm M-2-2 Model 210 Mixer - Dash Pot Assembly with hydrin diaphragm... A210-DP Model 210 Mixer - Dash Pot Assembly with silicone diaphragm... A210-DP-2

18 IMPCO Mixers MODEL 200D SERIES CARBURETORS & MIXERS Gaseous Fuel Carburetor Designed for several combustion strategies, such as standard burn-stoichiometric-feedback and it is fully adjustable.

23 18 IMPCO Mixers MODEL 200D SERIES CARBURETORS & MIXERS Gaseous Fuel Carburetor Designed for several combustion strategies, such as standard burn-stoichiometric-feedback and it is fully adjustable. It s interchangeable air horn adapters and interchangeable throttle bodies. Carburetor, 2-1/2" SAE, 3-1/2" AH D-1 Carburetor, 2-1/2" SAE, 3-1/2" AH SIL D-1-2 Carburetor, 2-1/2" SAE, 4" AH D-3 2-1/2" SAE flange, 45o - 4" air horn elbow, Permaglide bearings, IS, right hand adjustment w/silicone diaphragm. Substitute 400VF by using AB X + AB AA AT D-3-2 Carburetor w/silicone, left hand D-3-2L Use NG400VF D-3-2X Carburetor, 2-1/2" X 4", left hand D-3L 3" SAE flange, 45o - 4" air horn elbow, Permaglide bearings, IS, right hand adjustment. Substitute 400VF by using AB X + AB AA AT D-5 Carburetor, 2-1/2" X 4" AH D-7 Mixer, 200D, w/right hand adjustment, w/hydrin diaphragm. Substitute 400VF by using AB X with AB DM Mixer, 200D, w/right hand adjustment, w/silicone diaphragm. Substitute 400VF by using AV X withab DM-2 Carburetor, 2-1/2" X 3-1/2"... DG200D-1 2-1/2" SAE flange, 45o - 4" air horn elbow, Permaglide bearings, IS, DG-BV1-12 low heat air gas valve, right hand adjustment, digester gas. Substitute 400VF by using AB X + AB AA AT DG200D-3 3" SAE flange, 45o - 4" air horn elbow, DG-BV1-12, Permaglide bearings, IS, right and adjustment, digester gas... DG200D-5 Mixer assy, 200D, digester gas with hydrin diaphragm. Substitute 400VF by using AB X with AB DG200DM Mixer, digester gas, w/silicone diaphragm... DG200DM-2

IMPCO Mixers 19 MODEL 200T SERIES CARBURETORS & MIXERS Gaseous Fuel Carburetor Designed for several combustions strategies, such as standard burn-stoichiometric-feedback, it is also fully adjustable.

24 IMPCO Mixers 19 MODEL 200T SERIES CARBURETORS & MIXERS Gaseous Fuel Carburetor Designed for several combustions strategies, such as standard burn-stoichiometric-feedback, it is also fully adjustable. The 200T is readily adaptable with interchangeable air horn adapters and interchangeable throttle bodies. Mixers Carburetor, 3-1/2" SAE flange, right hand T-1 3-1/2" SAE flange, 3-7/8" air horn, center bore, Permaglide bearings, IS, right hand adjustment w/silicone diaphragm T-1-2 Carburetor w/silicone, left hand T-1-2L 3-1/2" SAE flange, 3-7/8" air horn, center bore, Permaglide bearings, IS, left hand adjustment T-1L Carburetor, 4" SAE flange, right hand or left hand T-3 Carburetor, 4" SAE flange, w/silicone diaphragm T-3-2 Carburetor, 3-1/2" w/b3-43, S3-93, CAT T-602 Mixer, 3-1/2" TM-1 Mixer, 3-1/2", w/silicone diaphragm TM-1-2 Mixer, 4" TM-2 3-1/2" SAE flange, 3-7/8" air horn, center bore, Permaglide bearings, IS, DG-BV1-12 with silicone, right hand adjustment, digester gas... DG200T-1-2

20 IMPCO Mixers MODEL 225 SERIES MIXERS Standard Model 200 for NG, Propane, and Digester Gas Product The Model 225 carburetor is a single-diaphragm air valve carburetor / mixer.

25 20 IMPCO Mixers MODEL 225 SERIES MIXERS Standard Model 200 for NG, Propane, and Digester Gas Product The Model 225 carburetor is a single-diaphragm air valve carburetor / mixer. It offers a downdraft air inlet that can be used for remote air filtration or open-element type air filters. This unit is availale for propane, natural gas, and digester gas applications. It has been successfully used for other hydrocarbon-based vapor fuels as low as 500 BTU. 2" SAE 1-barrel flange, no air horn, hydrin diaphragm Model 225 Mixer with hydrin diaphragm...225m Model 225 Mixer with silicone diaphragm...225m-2 1-1/4" 2B SAE flange, AF1-7...CA /2" 2B SAE flange, AF1-7...CA /4" SAE flange, 2-5/8" AH NB...CA Holley 2B flange, 5" center stud air horn...ca /2" SAE flange, 2-5/8" ctr stud AH...CA " SAE 1B flange, no air horn w/bracket & swivel...ca /4" & 1-1/2" SAE flange, 2-5/8"AH...CA Mixer with hydrin diaphragm...ca225m Mixer with silicone diaphragm...ca225m-2 Dual fuel, vacuum lift with hydrin diaphragm...ca225m-10 Dual fuel, vacuum lift with silicone diaphragm...ca225m-10-2 Mixer with hydrin diaphragm for ADP feedback system...fb225m Mixer with silicone diaphragm for ADP feedback system...fb225m-2 Mixer with silicone diaphragm for ADP feedback system, tamper resistant...fb225m-2tp Mixer with hydrin diaphragm with vacuum control solenoid...fb225m-10 Mixer, QVM Ford...FB225M-F6T49

IMPCO Mixers 21 Standard Model 300 for LPG, and Natural Gas for Dual Fuel MODEL 300 SERIES MIXERS The Model 300 carburetor is a complete mixer without air filter.

26 IMPCO Mixers 21 Standard Model 300 for LPG, and Natural Gas for Dual Fuel MODEL 300 SERIES MIXERS The Model 300 carburetor is a complete mixer without air filter. It has dual air filter capabilities of both 10 and 14. Mixers Mixer only, series 20 - no air filter...ca300a-20m Mixer, w/v2-11, w/micro vac switch, Boden cable, no air filter...ca300a-20m-2 Mixer, silicone diaphragm for Canada...CA300A-20M-2ULC Series 1 Std Carb w/ V2-11 gas valve, w/ Boden cable, no air filter...ca300a-m Series 1 Std Carb w/ V2-11 gas valve, w/ Boden cable, no air filter...ca300a-m-2 Series 1 Std Carb w/v2-11, no air filter, no Boden cable...ca300a-m-3 Series 1 Std Carb w/v2-11, no air filter, no Boden cable...ca300a-m-3-2 Series 1 Std Carb w/v2-11, no air filter, no Boden cable...ca300a-m-4-2 Series 50 w/v2-39 high flow gas valve, w/ Boden cable...ca300am-50-2 Series 50 w/v2-39 high flow gas valve, w/ silicone diaphragm...ca300am-50-3 Series 50 w/v2-39 high flow gas valve, w/ silicone diaphragm...ca300am-50-4 Series 70 w/v2-39 high flow gas valve, no air filter, w/vacuum valve...ca300am-70-2 Series 1 w/v2-49 feedback gas valve, w/silicone diaphragm...fb300a-m-2 Series 1 w/v2-49 feedback gas valve, no Boden cable, with silicone...fb300a-m-4-2 Series 50, w/ V2-50 feedback gas valve, w/silicone diaphragm...fb300am-50-2 Series 50 w/ V2-50 feedback gas valve, no Boden cable, no air filter...fb300am-50-4 Vacuum lift, w/v2-11 gas valve, no Boden wire, w/ silicone diaphragm...vl300a-m-2 Vacuum lift, w/v2-39 high flow gas valve, no air filter, no Boden wire...vl300am-50-2

22 IMPCO Mixers Standard Model 400 for Propane and LPG, NG, Digester and Landfill Gas 400 VARIFUEL CARBURETOR The IMPCO 400 VARIFUEL (400VF3) is a gaseous fuel carburetor of the concentric flow, air

27 22 IMPCO Mixers Standard Model 400 for Propane and LPG, NG, Digester and Landfill Gas 400 VARIFUEL CARBURETOR The IMPCO 400 VARIFUEL (400VF3) is a gaseous fuel carburetor of the concentric flow, air valve type. A precision gas metering valve is attached to the air valve. The air valve (and gas valve) motion is linear in relation to volumetric flow. The air/ fuel ratio is controlled by the adjustable power valve, shape of the gas metering valve, and the pressure from the gas regulator. The 400VF3 has anti-wear guide bushings for the air valve assembly. Carb, updrft 90 inlet & 3 T body...ng400vf3s-5-3 CAT ( CHG 001)...NG400VF3SM-1-2 Carb, updrft 90 inlet & 3 T body...ng400vf3u-5-3 Mixer assy updrft CAT NG400VF3UM-1-2 Mixer assy updraft (59028A)...NG400VF3UM-28A Carb, 400VF3 (replace 200D-3-2)...NG400VF3X-1-2 Carb, 400VF3 (replace 200D-302)...NG400VF3X-3-2 Carburetor assembly 400VF...NG400VF3X VF carb assy - top inlet...ng400vf3x-6-2 Carburetor, assemply, 400VF...NG400VF3XM-7-2

IMPCO Mixers 23 MODEL 425 SERIES MIXERS & CARBURETORS Standard Model 425 for LPG, and Natural Gas The Model 425 carburetor is a standard mixer with standard or optional throttle bodies.

28 IMPCO Mixers 23 MODEL 425 SERIES MIXERS & CARBURETORS Standard Model 425 for LPG, and Natural Gas The Model 425 carburetor is a standard mixer with standard or optional throttle bodies. Mixers 2-1/2" SAE flange, 5" center stud AH...CA425-2 Holley 1-1/2" 2B flange, 5" center stud AH...CA Mixer, w/v2-19 gas valve, w/hydrin diaphragm...ca425m Mixer, w/v2-19 gas valve, w/silicone diaphragm...ca425m-2 Mixer, Ford 429 CID kit, sil. diaphragm, cover Y1-7 tube...ca425m-3 Mixer, w/v2-19 special gas valve, silicone, Ford 429 engine...ca425m-510 Mixer,w/V2-18, w/silicone diaphragm, tamper resistant, no special tool...ca425m-4tp Mixer, w/v2-51, w/hydrin diaphragm for ADP feedback system...fb425m Mixer, w/v2-51, w/silicone diaphragm for ADP feedback system...fb425m-2 Mixer, w/v2-51, w/silicone diaphragm for feedback systems, tamper resistant...ft425m-2

24 IMPCO Mixers MODEL 600, 600D SERIES MIXERS & CARBURETORS 600 Series Gaseous Fuel Carburetor for Propane, LPG, NG, Digester and Landfill Gas The Model 600 series is designed for several combustion

29 24 IMPCO Mixers MODEL 600, 600D SERIES MIXERS & CARBURETORS 600 Series Gaseous Fuel Carburetor for Propane, LPG, NG, Digester and Landfill Gas The Model 600 series is designed for several combustion strategies. It has standard burn-stoichiometric feedback and is fully adjustable. The Model 600 is readily adaptable with interchangeable air horn adapters and interchangeable throttle bodies with improved PTFE bearing design. The carburetor flow rate is 960 CFM. The Model 600 is field serviceable with interchangeable air/gas valves. With turbocharger compatibility, this model is suitable for upstream or down stream installation. The normal operating pressure gas inlet is 5 H 2 0 over air inlet at an idle setting. Air inlet maximum is 30 PSI. Horsepoweris rated at 540 BHP (naturally aspirated). 4" SAE flange, 6" x 90o air horn, updraft w/hydrin diaphragm " SAE flange, 6" x 90o air horn, updraft w/silicone diaphragm Carburetor, white, SUP 6G-2/ " SAE with AV1-1726, no throttle body Carburetor, 4" updraft (59018) Carburetor, 4" updraft Left (59018-A) " SAE flange, A2-16 air horn, S2-41 spring, w/silicone " SAE with AT2-17 throttle body & BV updraft mixer with hydrin diaphragm...600m Mixer assy, updraft w/silicone M-2 Mixer assy, turbo w/silicone M-3 4" SAE flange, 6" x 90o air horn, downdraft w/hydrin diaphragm...600x-1 4" SAE flange, 6" x 90o air horn, downdraft w/silicone diaphragm X-1-2 4" SAE flange, 4-5/8" x 90o air horn, downdraft, w/silicone diaphragm...600x downdraft mixer w/silicone diaphragm...600xm-2

IMPCO Mixers 25 600D Series Gaseous Fuel Carburetor for Propane, LPG, NG, Digester and Landfill Gas The Model 600D series is designed for several combustion strategies.

30 IMPCO Mixers D Series Gaseous Fuel Carburetor for Propane, LPG, NG, Digester and Landfill Gas The Model 600D series is designed for several combustion strategies. It has standard burn-stoichiometric feedback and is fully adjustable. The Model 600 is readily adaptable with interchangeable air horn adapters and interchangeable throttle bodies with improved PTFE bearing design. The carburetor flow rate is 1600 CFM. Mixers The Model 600D is field serviceable with interchangeable air/gas valves. With turbocharger compatibility, this model is suitable for upstream, down stream or side draft applications. The normal operating pressure gas inlet is 5 H 2 0 over air inlet at an idle setting. Air inlet maximum is 30 PSI. Horsepower is rated at 1000 BHP (naturally aspirated). 4" duplex SAE flange, A2-128 air horn w/silicone diaphragm, updraft. Permaglide bearings, IS, w/hydrin...600d-1-2 4" duplex SAE flange, updraft mixer no air horn w/hydrin diaphragm, Permaglide bearings, IS...600DM 4" duplex SAE flange, 8" x 90o air horn w/silicone diaphragm, downdraft, Permaglide bearings, IS...600DX-1-2 4" duplex SAE flange w/aa3-38, A2-17 air horn, Ingersoll Rand 8SVG w/silicone diaphragm, Permaglide bearings, IS, downdraft...600dx-3-2 4" duplex SAE flange, A2-23 air horn, Permaglide bearings, IS, downdraft w/ silicone diaphragm...600dx-4-2 4" duplex SAE flange w/aa3-44, A2-23 air horn, Ingersoll Rand 10SVG & 12 SVG, downdraft w/silicone diaphragm...600dx-5-2 4" duplex SAE flange, AA2-23 air horn, Ingersoll Rand 10SVG, 12SVG, Permaglide bearings, IS, w/silicone...600dx-6-2 4" duplex SAE flange, no air horn, downdraft w/silicone diaphragm. Permaglide bearings, IS...600DXM-2

MODEL CA100 CARBURETOR

MODEL CA100 CARBURETOR The Model 100 is a single diaphragm air-gas valve carburetor/mixer. It offers a 90 degree air inlet to provide low overhead clearance, and is available with several Air Horn and