QT025A 2.4L 25 kw INDUSTRIAL SPARK-IGNITED GENERATOR SET EPA Certified Stationary Emergency

Transcription

1 STANDBY POWER RATING 25 kw, 31 kva, 60 z Image used for illustration purposes only Features Generator Set Benefits PROTOTYPE & TORSIONALLY TESTED PROVIDES A PROVEN UNIT UL2200 TESTED ENSURES A QUALITY PRODUCT RINOCOAT PAINT SYSTEM IMPROVES RESISTANCE TO ELEMENTS Engine EPA COMPLIANT ENVIRONMENTALLY FRIENDLY INDUSTRIAL TESTED, GENERAC APPROVED ENSURES INDUSTRIAL STANDARDS POWER-MATCED OUTPUT ENGINEERED FOR PERFORMANCE INDUSTRIAL GRADE IMPROVES LONGEVITY AND RELIABILITY Alternator TWO-TIRDS PITC ELIMINATES ARMFUL 3RD ARMONIC LAYER WOUND ROTOR & STATOR IMPROVES COOLING CLASS MATERIALS EAT TOLERANT DESIGN DIGITAL 3-PASE VOLTAGE CONTROL FAST AND ACCURATE RESPONSE Controls ENCAPSULATED BOARD W/ SEALED ARNESS EASY, AFFORDABLE REPLACEMENT 4-20mA VOLTAGE-TO-CURRENT SENSORS NOISE RESISTANT 24/7 MONITORING SURFACE-MOUNT TECNOLOGY PROVIDES VIBRATION RESISTANCE ADVANCED DIAGNOSTICS & COMMUNICATIONS ARDENED RELIABILITY 1 OF 5

2 APPLICATION AND ENGINEERING DATA ENGINE SPECIFICATIONS General Make EPA Emissions Compliance EPA Emissions Engine Reference Cylinder # 4 Type Number of Main Bearings 5 Connecting Rods Cylinder Liners Ignition Generac Stationary Emergency See Emissions Data Sheet In-line Displacement - L (cu In) 2.4 Bore - mm (in) (3.41) Stroke - mm (in) (3.94) Compression Ratio 9.5:1 Intake Air Method Cylinder ead Piston Type Crankshaft Type Lifter Type Intake Valve Material Exhaust Valve Material ardened Valve Seats Engine Governing Governor Frequency Regulation (Steady State) Nuturally Aspirated Forged Aluminum No igh Energy Aluminum Alloy Cast Overhead Cam Steel Alloy ardened Steel yes Electronic +/- 0.25% *Fuel pressure must remain within specified range and not drop more than 1 in. w.c from static (no-load) to full load. Lubrication System Oil Pump Type Oil Filter Type Cooling System Cooling System Type Water Pump Flow -gal/min 11 Fan Type Pressurized Closed Pusher Fan Speed (rpm) 2150 Fan Diameter mm (in) 457 (18) Coolant eater Wattage 1500 Coolant eater Standard Voltage 120 VAC Fuel System Fuel Type Carburetor Secondary Fuel Regulator Fuel Shut Off Solenoid Natural Gas, Propane Vapor Down Draft Standard Standard Operating Fuel Pressure (Standard) O* Engine Electrical System System Voltage Battery Charging Alternator (Amps) 30 Battery Size Battery Voltage Ground Polarity Gear Crankcase Capacity - L (qts) 3.8 (4) Full-Flow sping-on Cartridge 12 VDC See Battery Index SBY 12 VDC Negative ALTERNATOR SPECIFICATIONS Standard Model 390mm Poles 4 Field Type Revolving Insulation Class - Rotor Insulation Class - Stator Total armonic Distortion <5% Telephone Interference Factor (TIF) <50 Standard Excitation Brush Type Bearings Sealed Ball Coupling Flexible Disc Load Capacity - 100% Prototype Short Circuit Test Yes Voltage Regulator Type Full Digital Number of Sensed Phases 3 Regulation Accuracy (Steady State) ±0.25% CODES AND STANDARDS COMPLIANCE (WERE APPLICABLE) NFPA 99 BS5514 NFPA 110 SAE J1349 ISO DIN6271 ISO 1708A.5 IEEE C62.41 TESTING ISO 3046 NEMA ICS 1 UL2200 Rating Definitions: Applicable for a varying emergency load for the duration of a utility power outage with no overload capability. (Max. load factor = 70%) 2 OF 5

3 OPERATING DATA POWER RATINGS Natural Gas Propane Vapor Single-Phase 120/240 Three-Phase 120/208 Three-Phase 120/240 Three-Phase 277/ STARTING CAPABILITIES (skva) skva vs. Voltage Dip 480 VAC 208/240 VAC Alternator kw 10% 15% 20% 25% 30% 35% 10% 15% 20% 25% 30% 35% Standard FUEL CONSUMPTION RATES* Percent Load 25% 50% 75% 100% Natural Gas ft 3 /hr m 3 /hr Percent Load 25% 50% 75% 100% Propane Vapor ft 3 /hr m 3 /hr * Fuel supply installation must accommodate fuel consumption rates at 100% load. COOLING Air Flow (inlet air combustion and radiator) System Coolant Capacity eat Rejection to Coolant Max. Operating Ambient Temperature Max. Ambient Temperature Maximum Radiator Backpressure ft 3 /min(m 3 /min) gal (Liters) BTU/hr ºF (ºC) ºF (ºC) in 2 O 1500 (42.48) 2.5 (9.46) 95, (50) 104 (40) 0.5 COMBUSTION AIR REQUIREMENT Flow at Rated Power cfm (m 3 /min) 70 ENGINE EXAUST Rated Engine Speed rpm 1800 orsepower at Rated kw** hp 40 Piston Speed ft/min BMEP psi ** Refer to Emissions Data Sheet for maximum bp for EPA and SCAQMD permitting purposes Exhaust Flow (Rated Output) cfm (m 3 /min) 220 (6.2) Max. Backpressure (Post Turbo) ing (Kpa) 1.5 (5.1) Exhaust Temp (Rated Output - post silencer) ºF (ºC) 975 (524) Exhaust Outlet Size (Open Set) mm (in) 63.5 (2.5) Deration Operational characteristics consider maximum ambient conditions. Derate factors may apply under atypical site conditions. Please consult a Generac Power Systems Industrial Dealer for additional details. All performance ratings in accordance with ISO3046, BS5514, ISO8528 and DIN6271 standards. 3 OF 5

4 STANDARD FEATURES AND OPTIONS GENERATOR SET Genset Vibration Isolation Std Extended warranty Opt Gen-Link Communications Software Opt Steel Enclosure Opt Aluminum Enclosure Opt ENGINE SYSTEM General Oil Drain Extension Std Critical Exhaust Silencer Std Air cleaner Std Fan guard Std Radiator duct adapter Std Fuel System Fuel lockoff solenoid Std Secondary Fuel Regulator Std Flexible fuel lines Std Cooling System 120VAC Coolant eater Std Closed Coolant Recovery System Std UV/Ozone resistant hoses Std Factory-Installed Radiator Std Radiator Drain Extension Std Engine Electrical System Battery charging alternator Std Battery cables Std Battery tray Std Solenoid activated starter motor Std 10A UL float/equalize battery charger Std Rubber-booted engine electrical connections Std ALTERNATOR SYSTEM UL2200 GENprotect Std Main Line Circuit Breaker Std CONTROL SYSTEM Control Panel Digital Control Panel - Dual 4x20 Display Std Programmable Crank Limiter Std 21-Light Remote Annunciator Opt Remote Relay Panel (8 or 16) Opt 7-Day Programmable Exerciser Std Special Applications Programmable PLC Std RS-232 Communications Std RS-485 Communications Std All-Phase Sensing DVR Std Full System Status Std Utility Monitoring (Req. -Transfer Switch) Std 2-Wire Start Compatible Std Power Output (kw) Std Power Factor Std Reactive Power Std All phase AC Voltage Std All phase Currents Std Oil Pressure Std Coolant Temperature Std Coolant Level Std Fuel Pressure Std Engine Speed Std Battery Voltage Std Frequency Std Isochronous Governor Control Std -40deg C - 70deg C Operation Std Waterproof Plug-In Connectors Std Audible Alarms and Shutdowns Std Not in Auto (Flashing Light) Std Auto/Off/Manual Switch Std E-Stop (Red Mushroom-Type) Std NFPA 110 Level I and II (Programmable) Std Remote Communication - RS232 Std Alarms (Programmable Tolerances, Pre-Alarms and Shutdowns) Low Fuel Pressure Std Oil Pressure (Pre-programmed Low Pressure Shutdown) Std Coolant Temperature (Pre-programmed igh Temp Shutdown) Std Coolant Level (Pre-programmed Low Level Shutdown) Std Engine Speed (Pre-programmed Overspeed Shutdown) Std Voltage (Pre-programmed Overvoltage Shutdown) Std Battery Voltage Std 4 OF 5

5 DIMENSIONS AND WEIGTS* W L OPEN SET (Includes Exhaust Flex) L x W x in (mm) 77 (1956) x 34 (864) x 43 (1092) Weight (lbs) 1163 dba* 83 W L LEVEL 1 ACOUSTIC ENCLOSURE L x W x in (mm) 77 (1956) x 34 (864) x 46 (1168) Weight (lbs) 1414 dba* 60 *All measurements are approximate and for estimation purposes only. Sound levels measured at 23ft (7m) under normal operation and do not account for ambient site conditions. YOUR FACTORY RECOGNIZED GENERAC INDUSTRIAL DEALER Specification characteristics may change without notice. Please consult a Generac Power Systems Industrial Dealer for detailed installation drawings. Generac Power Systems, Inc. P.O. Box 8 Waukesha, WI 531 P: (262) Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Part No SBY Rev. F 10/23/15 5 OF 5