Power Rating Minimum Power 218 bkw 292 bhp Maximum Power 359 bkw 482 bhp mm (5.4 in) mm (6.5 in)
|
|
- Marcia Bell
- 5 years ago
- Views:
Transcription
1 The Cat 3406C Diesel Fire Pump Engine is offered in ratings ranging from bkw ( rpm. These ratings are non-certified and available for global non-regulated areas. They are FM Approved and UL Listed. Additional 3406C ratings with or without radiators are available, but not FM approved or UL listed. Starting on demand is a must for a fire pump engine - always. Cat fire pump engines have a reputation for reliable starts and long efficient service. Specifications Power Rating Minimum Power 218 bkw 292 bhp Maximum Power 359 bkw 482 bhp Rated Speed rpm Emission Standards Emissions Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed General Engine Configuration Inline 6, 4-Stroke-Cycle Diesel Bore mm (5.4 in) Stroke mm (6.5 in) Displacement 14.6 L (893 in³) Aspiration Turbocharged Aftercooled Compression Ratio 14.5:1 Rotation (from flywheel end) Counterclockwise Cooling System Capacity 32.2 L (34 qt) Lube System (refill) 34.1 L (36 qt) SS SS Page 1 of 6 Page: M-1 of M-4
2 Benefits And Features Emissions Non-certified for U.S. EPA stationary emergency fire engines. Available for global non-regulated areas. FM Approved. UL Listed. Additional 3406C ratings with or without radiators are available, but not FM approved or UL listed. Reliable, Quiet and Durable Power World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life. Quality Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction. World-class Product Support Offered Through Global Cat Dealer Network Scheduled maintenance, including SOSSM sample Customer Support Agreements (CSA) Caterpillar Extended Service Coverage (ESC) Superior dealer service network Extended dealer service network through the Cat Service Distributor (ISD) program Standard Equipment Air Inlet System Dry or watercooled manifold and turbocharger Charging System Charging Alternator, 24 volt, 35 amp Control System Hydra-mechanical governor Cooling System Thermostats and housing Jacket water pump, gear driven, centrifugal Heat exchanger Expansion tank FM Required Raw Water Cooling Loops: 1.5" iron, horizontal or vertical, 1.5" 316 stainless steel, horizontal or vertical Optional Radiator, not UL listed or FM approved SS SS Page 2 of 6 Page: M-2 of M-4
3 Exhaust System Exhaust manifold, dry Exhaust elbow, dry, 152 mm (6 in), 4 bolt flange Flywheels and Flywheel Housing SAE No. 1 flywheel SAE No. 1 flywheel housing SAE standard rotation Fuel System Fuel filter, LH Fuel transfer pump Primary fuel filter / water separator Instrumentation Instrument panel, LH Engine oil pressure gauge Fuel pressure gauge Water temperature gauge Service meter Lube System Crankcase breather Oil cooler Lube oil filter Oil filler in valve cover and dipstick, both RH Rear sump oil pan Oil filler in valve cover Dipstick Mounting System Supports Power Take-Offs Flywheel stub shaft Protection System Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation) SS SS Page 3 of 6 Page: M-3 of M-4
4 General Vibration damper and guard Lifting eyes Paint - fire pump red, optional radiator painted black The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos, ADEM, EUI, S O S, "Caterpillar Yellow" and the "Power Edge" trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. SS SS Page 4 of 6 Page: M-4 of M-4
5 INDUSTRIAL - Technical Spec Sheet FIRE PUMP 3406C 218 bkw ( rpm Rating Type: FIRE PUMP Emissions: Non-certified 3406C 218 bkw ( rpm Image shown may not reflect actual configuration Metric English Engine Data Engine Power 218 bkw 292 bhp Engine Speed 1750 rpm Max Altitude without 50 C 2500 m N/A BMEP 1021 kpa 148 psi 100% load 211 g/bkw-hr.35 lb/bhp-hr 75% load N/A N/A 50% load N/A N/A 25% load N/A N/A Air Flow Rate (@ 25 C, kpa) 19.2 m³/min 677 ft³/min Inlet Manifold Rated 93 kpa 27.7 psi Inlet Manifold Rated 1151 C N/A Jacket Water Temperature N/A N/A Exhaust Stack Temperature 395 C 742 F Exhaust Flow Rate (@ Stack Temp kpa) 42.9 m³/min 1516 ft³/min Engine Coolant Capacity N/A N/A SS SS Page 5 of 6 TSS-TM CS-IND pdf Page 1 of 2
6 INDUSTRIAL - Technical Spec Sheet FIRE PUMP 3406C 218 bkw ( rpm Rating Type: FIRE PUMP Emissions: Non-certified Heat Rejection Data Percent Load Engine Power Rejection to Jacket Water Rejection to Atmosphere Rejection to Exhaust Rejection to After Cooler bkw bhp kw Btu/min kw Btu/min kw Btu/min kw Btu/min RATING DEFINITIONS AND CONDITIONS Conditions - Engine performance is corrected to inlet air standard conditions of 99 kpa (29.31 in Hg) and 25 C (77 F). These values correspond to the standard atmospheric pressure and temperature in accordance with SAE J1349. Also included is a correction to standard fuel gravity of 35 degrees API having a lower heating value of 42,780 kj/kg (18,390 BTU/lb) when used at 29 C (84.2 F) where the density is g/l (7.002 lb/gal). Performance Number: TM Engine Arrangement: Feature Code: 406DF64 The corrected performance values shown for Cat engines will approximate the values obtained when the observed performance data is corrected to SAE J1349, ISO & 8665 & 2288 & 9249 & 1585, EEC 80/1269 and DIN70020 standard reference conditions. Engines are equipped with standard accessories; lube oil, fuel pump and jacket water pump. The power required to drive auxiliaries must be deducted from the gross output to arrive at the net power available for the external (flywheel) load. Typical auxiliaries include cooling fans, air compressors, and charging alternators. The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos, ADEM, EUI, S O S, "Caterpillar Yellow" and the "Power Edge" trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. SS SS Page 6 of 6 TSS-TM CS-IND pdf Page 2 of 2
Power Rating Minimum Power 1506 bkw 2100 bhp Maximum Power 1506 bkw 2100 bhp
The Cat is offered at 1506 bkw (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. It offers unsurpassed performance
More informationPower Rating Minimum Power 761 bkw 1020 bhp Maximum Power 1119 bkw 1500 bhp mm (68 in) 190 mm (7.5 in)
The is offered in ratings ranging from 761-1119 bkw (1020-1500 bhp) @ 1200-1800 rpm. These ratings are non-certified and available for global non-regulated areas. Industries and applications powered by
More informationPower Rating Minimum Power 761 bkw 1020 bhp Maximum Power 1119 bkw 1500 bhp mm (68 in) 190 mm (7.5 in)
The Cat 3512 Diesel Engine is offered in ratings ranging from 761-1119 bkw (1020-1500 bhp) @ 1200-1800 rpm. These ratings are non-certified and available for global non-regulated areas. Industries and
More informationPower Rating Minimum Rating 429 bkw 575 bhp Maximum Rating 470 bkw 630 bhp Rated Speed
The Cat Power Unit is offered in ratings ranging from 429-470 bkw (575-630 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent and EU Stage IIIA equivalent or Noncertified
More informationPower Rating Minimum Power 429 bkw 575 bhp Maximum Power 597 bkw 800 bhp. 145 mm (5.71 in) 183 mm (7.2 in)
The Cat C18 ACERT Diesel Engine is offered in ratings ranging from 429-522 bkw (575-700 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, and EU Stage IIIA equivalent
More informationMinimum Power 168 bkw 225 bhp Maximum Power 224 bkw 300 bhp. Emission Standards China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
Specifications Power Rating The Cat Diesel Engine is offered in ratings ranging from 168-224 bkw (225-300 bhp) @ 1800-2200 rpm. These ratings meet China Stage II, EPA Tier 3 equivalent, and EU Stage IIIA
More information3516 B Industrial Engine
CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 69.0 L (4,210.64 in 3 ) Aspiration...Turbocharged / SCAC Compression Ratio...14.0:1
More information3508 B Industrial Engine
CAT ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 ) Aspiration...Turbocharged / SCAC Compression Ratio...14.0:1
More information3406 C Industrial Engine Non-Certified 362 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...165.1 mm (6.5 in) Displacement... 14.64 L (893.39 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...15.9:1
More information3512 Industrial Engine
CAT ENGINE SPECIFICATIONS V-12, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 51.8 L (3,161.03 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
More information3516 Industrial Engine
CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 69.06 L (4,214.3 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
More informationPower Rating Minimum Power 746 bkw 1000 bhp Maximum Power 895 bkw 1200 bhp. Emission Standards U.S. EPA Tier 4 Final
No matter where they operate and no matter what the application, these high horsepower Cat C32 ACERT Diesel engines will deliver durable, reliable power that will keep your customers productive while lowering
More information3508 Industrial Engine
FEATURES Image shown may not reflect actual engine CAT ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 ) Aspiration...Turbocharged
More information3406 C Industrial Engine Non-Certified 298 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...165.1 mm (6.5 in) Displacement... 14.64 L (893.39 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...15.9:1
More information3406 C Industrial Engine Non-Certified 328 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...165.1 mm (6.5 in) Displacement... 14.64 L (893.39 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...14.6:1
More informationPower Rating Minimum Power 250 bkw 335 BHP Maximum Power 340 bkw 456 BHP
The Cat C9.3B Diesel Engine is offered in ratings ranging from 250-340 bkw (335-456 bhp) @ 1800-2200 rpm. These ratings meet U.S. EPA Tier 4 Final and EU Stage V emission standards. The C9.3B engines are
More informationC18 ACERT Fire Pump Tier bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More informationC18 ACERT Fire Pump Tier bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More informationC18 ACERT Fire Pump Tier bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More informationC18 ACERT Fire Pump Tier bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More information3512 Industrial Engine
CAT ENGINE SPECIFICATIONS V-12, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 51.8 L (3,161.03 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
More informationMinimum Power 287 bkw 385 bhp Maximum Power 388 bkw 520 bhp
Specifications Power Rating The Cat C13 ACERT Diesel Engine is offered in ratings ranging from 287-388 bkw (385-520 bhp) @ 1800-2100 rpm. Industries and applications powered by C13 ACERT engines include:
More informationMinimum Power 224 bkw 300 bhp Maximum Power 298 bkw 400 bhp
Specifications Power Rating The Cat C9.3 ACERT Diesel Engine is offered in ratings ranging from 224-298 bkw (300-400 bhp) @ 1800-2200 rpm. These ratings meet U.S. EPA Tier 4 Final, EU Stage IV emission
More information3508 Industrial Engine
FEATURES Image shown may not reflect actual engine CAT ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 ) Aspiration...Turbocharged
More informationIndustrial CATERPILLAR ENGINE SPECIFICATIONS FEATURES. 612 bkw / 820 bhp rpm
3508 612 bkw / 820 bhp Industrial 1300 rpm CATERPILLAR ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore... 170.0 mm (6.69 in) Stroke... 190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 )
More informationPower Rating Minimum Power 224 bkw 300 bhp Maximum Power 298 bkw 400 bhp. Emission Standards U.S. EPA Tier 4 Final, EU Stage IV
Demanding conditions, applications and environments make the Cat engines in the C9.3 ACERT engines the perfect solution for your severe duty equipment. With decades of diesel engine innovation and expertise
More informationC7 ACERT Industrial Engine Tier 3/Stage IIIA 224 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1 Rotation
More informationC18 ACERT Industrial Engine Tier bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1
More informationMinimum Power 447 bkw 600 bhp Maximum Power 597 bkw 800 bhp Rated Speed
Specifications Power Rating On construction sites and mining operations, in agriculture and forestry, and in a wide range of industries, Cat C18 ACERT Diesel Engines deliver the power, performance and
More informationC7 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1 Rotation
More informationC7 ACERT Industrial Power Unit Tier 3/Stage IIIA 168 bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1
More informationC18 ACERT Industrial Engine Tier 3/Stage IIIA 429 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1
More informationC32 ACERT Industrial Engine Tier bkw/ rpm
CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression
More informationC32 ACERT Industrial Engine Tier bkw/ rpm
CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression
More informationC18 ACERT Industrial Engine Tier 3/Stage IIIA 470 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1
More informationC9 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...112.0 mm (4.41 in) Stroke...149.0 mm (5.87 in) Displacement... 8.8 L (537.01 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.1:1
More informationC32 ACERT Industrial Engine Tier bkw/ rpm
CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression
More informationC18 ACERT Industrial Power Unit Tier bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression
More informationC15 ACERT Industrial Engine Tier 3/Stage IIIA 328 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...171.4 mm (6.75 in) Displacement... 15.2 L (927.56 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...18.0:1
More informationC11 ACERT Industrial Engine Tier 3/Stage IIIA 242 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...130.0 mm (5.12 in) Stroke...140.0 mm (5.51 in) Displacement... 11.1 L (677.36 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...17.2:1
More informationC13 ACERT Industrial Engine Tier 3/Stage IIIA 310 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...130.0 mm (5.12 in) Stroke...157.0 mm (6.18 in) Displacement... 12.5 L (762.8 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...17.3:1
More informationC9 ACERT Industrial Power Unit Tier 3/Stage IIIA 261 bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...112.0 mm (4.41 in) Stroke...149.0 mm (5.87 in) Displacement... 8.8 L (537.01 in 3 ) Aspiration...Turbocharged Aftercooled Compression
More informationC15 ACERT Industrial Power Unit Tier 3/Stage IIIA 354 bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...171.4 mm (6.75 in) Displacement... 15.2 L (927.56 in 3 ) Aspiration...Turbocharged Aftercooled Compression
More information3516B Offshore Generator Set
3516B Offshore Generator Set 1285 ekw (1836 kva) 60 Hz (1200 rpm) Actual configuration may vary from displayed image CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... IMO Tier I Bore...
More informationMARINE C18 SPECIFICATIONS. Lube System. service, oil level gauge - RH or LH service, oil filler, Cooling System
486 mhp (479 bhp) 357 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Displacement... 18.1 L (1106 cu in) Rated Speed...1800 Bore... 145.0 mm (5.7 in) Stroke... 183.0 mm
More informationPower Rating Minimum Rating 116 bkw 156 bhp Maximum Rating 205 bkw 275 bhp. 105 mm (4.1 in) 135 mm (5.3 in)
Cat C7.1 ACERT Power Unit The C7.1 ACERT Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring, completely pre-assembled for fast, straightforward installation
More information3412C MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 730 mhp (720 bhp) 537 bkw
730 mhp (720 bhp) 537 bkw Image shown may not reflect actual SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 27.03 L (1,649.47 in 3 ) Rated Speed...1800 Bore... 137.2 mm (5.4
More informationBore 145 mm 5.71 in Stroke 162 mm 6.38 in Displacement 32.1 L in 3 Twin Turbocharged-Aftercooled (TTA) Compression Ratio 15.0:1 67.
EU Locomotive Stage IIIB 89-895 bkw/5-00 bhp @ 800 rpm Image shown may not reflect actual configuration Specifications Cat C ACERT Metric Imperial (English) Configuration V-, 4-Stroke-Cycle Diesel Bore
More informationPower Rating Minimum Power 36.4 bkw 48.8 bhp Maximum Power 50 bkw 67.1 bhp. Emission Standards U.S. EPA Tier 4 Final, EU Stage IIIB
The new electronic Cat C2.2 Diesel Engines, with common rail fuel system, deliver impressive performance throughout a wide speed range with exceptional power density. Ultracompact package size and extensive
More informationVoltage 220 to or 1800 RPM. Engine Specifications C32 TA, V-12, 4-Stroke Water-Cooled Diesel 145 mm (5.71 in)
C32 Generator Set with Upgradeable Packaging Electric Power The C32 with the upgradeable packaging design has been developed for a wide range of applications, from emergency standby installations such
More informationC12 ACERT MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 715 mhp (705 bhp) 526 bkw
715 mhp (705 bhp) 526 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 11.95 L (729.23 in 3 ) Rated Speed... 2300 Bore... 130.0 mm (5.12
More informationC9 ACERT MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 575 mhp (567 bhp)
575 mhp (567 bhp) 423 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions... IMO compliant Displacement... 8.82 L (538.23 in 3 ) Rated Speed...2500 Bore... 112.0
More information3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2200 bhp) 1641 bkw
2231 mhp (2200 bhp) 1641 bkw Image shown may not reflect actual SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... EPA T1-IMO Displacement... 69.06 L (4,214.3 in 3 ) Rated Speed...1800 Bore... 170.0
More informationSpecifications. C13 Generator Set Electric Power
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications Generator Set
More information: see performance curve rev. A : suction 900 mm / discharge 700 mm
PUMPUNIT HK700 PUMP General The HK pump is a single-stage mixed-flow centrifugal pump for lifting large quantities of water to medium heads. The pump is suitable for heavily contaminated and unpurified
More informationMARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 320 mhp (315 bhp) 235 bkw
320 mhp (315 bhp) 235 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 7.2 L (442 cu in) Rated Speed...2400 Bore... 110 mm (4.33 in) Stroke...
More informationGenerator Set Configurations Low Fuel Consumption, EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications Generator Set
More information3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2447 bhp) 1825 bkw
2482 mhp (2447 bhp) 1825 bkw Image shown may not reflect actual SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... EPA T1-IMO Displacement... 78.08 L (4,764.73 in 3 ) Rated Speed...1600 Bore... 170.0
More information220 to Volts. Generator Set Configurations U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards)
Generator Set Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications
More informationSpecifications. 3406C Generator Set Electric Power
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications Generator Set
More informationVoltage 220 to or 1800 RPM
A TA Diesel Generator Set Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications
More information3056 MARINE PROPULSION
056 MARINE PROPULSION 9 bkw (125 bhp) Image may not reflect actual engine SPECIFICATIONS I-6, -Stroke-Cycle-Diesel Bore... 100 mm (.9 in.) Stroke... 127 mm (5.0 in.) Displacement.................. 6 L
More information400 to 11,000 Volts. Standby, Prime, Continuous
Generator Set Electric Power The generator set has been developed for a wide range of applications, from emergency standby installations such as healthcare and datacenters to continuously powering remote
More information220 to Volts or 1800 RPM
Diesel Generator Set Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications
More information220 to Volts or 1800 RPM
Diesel Generator Set Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications
More informationMarine Propulsion 3126
Marine Propulsion 3126 SPECIFICATIONS 22 bkw @ rpm bhp @ rpm Shown with Accessory Equipment STANDARD ENGINE EQUIPMENT Air Inlet System 12V air inlet heater, sea water aftercooler, air cleaner/fumes disposal,
More information3516B SPECIFICATIONS. Lube System. gear type oil pump, gear type scavenge oil pump Dual Caterpillar A-III electronic engine control, Mounting System
2840 mhp (2800 bhp) 2088 bkw Image shown may not reflect actual SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... EPA T1-IMO Displacement... 69.0 L (4,210.64 in 3 ) Rated Speed...1880 Bore... 170.0
More information220 to volts. Electronic unit injection
Generator Set Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications
More informationContinuous, Prime, Standby, Mission Critical
Diesel Generator Set Electric Power The generator set has been developed for a wide range of applications, from emergency standby installations such as healthcare and datacenters to continuously powering
More informationVoltage 208 to 600. Engine Specifications C27 ATAAC, V-12, 4-Stroke, Water-Cooled Diesel Compression Ratio 16.5:1 Aspiration
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications Generator Set
More information3412C Generator Set Electric Power. Specifications. Benefits and Features
Generator Set Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications
More informationEngine Specifications 3512C HD ATAAC, V-12, 4-Stroke Water-Cooled Diesel Compression Ratio 14.7:1 Aspiration
3512C Generator Set Electric Power Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
More informationBore mm 4.35 in Displacement 8.8 L 535 in³ Stroke mm 4.5 in Compression Ratio 10.1:1
Generator Set Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Image shown may
More informationC32 ACERT MARINE AUXILIARY/ GENERATOR SET
C32 ACERT MARINE AUXILIARY/ GENERATOR SET 590-994 b (791-1333 b) C32 ACERT Keel Cooled Marine Auxiliary/ Generator Set Images shown may not reflect actual engines SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel
More information1500 or 1800 RPM. Engine Specifications C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel 145 mm (5.71 in) 183 mm (7.2 in) Compression Ratio 14.
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications Generator Set
More informationC18 ACERT SPECIFICATIONS. Instrumentation. clear switch, start motor magnetic switch, 15 and 3A Corrosion-resistant sea water aftercooler, air
560 mhp (553 bhp) 412 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions... IMO/EPA Tier 2 Displacement... 18.1 L (1106 cu in) Rated Speed...2100 Bore... 145.0 mm
More informationC18 ACERT SPECIFICATIONS. Instrumentation. clear switch, start motor magnetic switch, 15 and 3A Corrosion-resistant sea water aftercooler, air
460 mhp (454 bhp) 339 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions... IMO/EPA Tier 2 Displacement... 18.1 L (1106 cu in) Rated Speed...1800 Bore... 145.0 mm
More information220 to volts. Engine Specifications 3516C, ATAAC, V-16,4-Stroke Water-Cooled Diesel 170 mm (6.69 in) Compression Ratio 14.
Generator Set Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications
More informationC280-8 MARINE PROPULSION
C280-8 MARINE PROPULSION 3084 bhp (2300 bkw) 900 rpm SPECIFICATIONS Shown with Accessory Equipment In-Line 8, 4-Stroke-Cycle-Diesel Emissions.................. IMO/EPA Tier 2 Compliant Bore mm (in)...
More information3512B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (1360 bhp)
1379 mhp (1360 bhp) 1014 bkw Image shown may not reflect actual SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 51.8 L (3,160.84 cu. in) Rated Speed...1600 Bore... 170.0 mm (6.69
More information3512C MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (1810 bhp) 1350 bkw
1836 mhp (1810 bhp) 1350 bkw Image shown may not reflect actual SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel Emissions...IMO Compliant Displacement... 58.56 L (3,573.55 in 3 ) Rated Speed...1600 Bore...
More information3512C MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2550 bhp) 1902 bkw
2586 mhp (2550 bhp) 1902 bkw Image shown may not reflect actual SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel Emissions...IMO Compliant Displacement... 58.56 L (3,573.55 in 3 ) Rated Speed...1800 Bore...
More information1500 or 1800 RPM. Engine Specifications C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel 145 mm (5.71 in) 183 mm (7.2 in) Compression Ratio 14.
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Specifications Generator Set
More informationBore mm 4.0 in Displacement 5.7 L 350 in³ Stroke 88.4 mm 3.48 in Compression Ratio 9.4:1
Generator Set Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Image shown may
More informationGenerator Set Specifications 60 ekw (75 kva)
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Picture shown may not reflect
More informationGenerator Set Specifications 100 ekw (125 kva)
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Image shown may not refl ect
More informationlike mission critical Backed by the worldwide l provide the reliabi Mission Critical LEHE1075
like mission critical standby for r installations. Backed by the worldwide l provide the reliabi 4 3000 400 Mission Critical LEHE1075 an. These generators feature permanent magnet alternators which provide
More informationincluding r installations. Backed by the worldwide l provide the reliabi Prime LEHE1073
including r installations. Backed by the worldwide l provide the reliabi 2 2750 400 Prime LEHE1073 an. These generators feature permanent magnet alternators which provide 300% short circuit sustaining
More informationPRIME 3880 ekw 4850 kva 50 Hz 1000 rpm
DIESEL GENERATOR SET PRIME 3880 ekw 4850 kva Image shown may not reflect actual package Caterpillar is leading the power generation Market place with Power Solutions engineered to deliver unmatched flexibility,
More informationAftercooler (Separate Circuit) N/A N/A
520 ekw/ 650 kva/ 50 Hz/ 1500 rpm/ 400 V/ 0.8 Power Factor Rating Type: PRIME 520 ekw/ 650 kva 50 Hz/ 1500 rpm/ 400 V Image shown may not reflect actual configuration Metric English Package Performance
More informationSTANDBY 2860 ekw 3575 kva 50 Hz 1000 rpm
DIESEL GENERATOR SET STANDBY 2860 ekw 3575 kva Image shown may not reflect actual package Caterpillar is leading the power generation Market place with Power Solutions engineered to deliver unmatched flexibility,
More informationCONTINUOUS 3520 ekw 4400 kva 50 Hz 1000 rpm
DIESEL GENERATOR SET CONTINUOUS 3520 ekw 4400 kva Image shown may not reflect actual package Caterpillar is leading the power generation Market place with Power Solutions engineered to deliver unmatched
More informationC MARINE PROPULSION
C175-16 MARINE PROPULSION 2721-2948 m (2683-2907 b) 2001-2168 b SPECIFICATIONS Image shown may not reflect actual engine configuration STANDARD ENGINE EQUIPMENT Air Inlet System Corrosion-resistant aftercooler
More informationMARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 375 mhp (370 bhp)
375 mhp (370 bhp) 276 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 7.2 L (442 cu in) Rated Speed...2600 Bore... 110 mm (4.33 in) Stroke...
More informationEnclosures. Options Caterpillar yellow or white paint Integral dual wall fuel tank base for total fluid containment (fuel, oil and coolant)
Sound Attenuated 50 Hz / 60 Hz These sound attenuated, factory installed enclosures incorporate internally mounted super critical level silencers, designed for safety and aesthetic value on integral fuel
More informationGenerator Set Specifications 480 ekw 600 KVA
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Picture shown may not reflect
More information3516B Generator Set Electric Power
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Image shown may not reflect
More informationC32 ACERT MARINE PROPULSION
1470-1925 m (1450-1900 b) 1081-1417 b s for Pleasure Craft Applications C32 ACERT Heat Exchanger Cooled Image shown may not reflect actual engine SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel Emissions.................
More informationPRIME 2260 ekw 2825 kva 50 Hz 1500 rpm Volts
DIESEL FEATURES GENERATOR SET PRIME 2260 ekw 2825 kva Image shown may not reflect actual package Caterpillar is leading the power generation Market place with Power Solutions engineered to deliver unmatched
More informationGenerator Set Specifications 320 ekw (400 kva)
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Image shown may not refl ect
More information