Door& locks. & accessories

Transcription

1 Door& locks accessories Call points Stands Electric doors Magnetic locks Door release buttons Power supplies CATA-CHAP11masterUK.indd /12/ :36

2 Call point for trucks and cars FEATURES A C Painted steel 4 mm thick Vandal-resistant Outdoor or indoor use Height of call button suitable for handicapped persons Baseplate 5 mm thick S Call point for cars S 250 cm 170 cm S Colours in the standard RAL chart are available. For instance: Blue Red Black White S Yellow BA165V BA250P The models presented are examples (not stored). To order the Call points, see the procedure next page. 132 GLC CATA-CHAP11masterUK.indd /12/ :36

3 CALL POINTS 6 weeks delay. this document must be signed and aproved. 250 cm One document by configuration 170 cm Aiphone offers customized call points. Configure your call point in 4 steps: Step 1 Choose the call point and colour RAL standard Blue Black Red White Yellow BA165V BA250P Other RAL no. Step 2 Choice of door station (flush mount versions only) BA250P Item code Reference BA165V Top Bottom WARNING: the Call points will be delivered with only the location for them Step 3 Fill in an information request This request must be attached to the order Company :... Address :... Post code :... City:... Name :... Telephone :... Number of Call points with the same configuration: Step 4 Send order Send this request with the order to your local agent GLC CATA-CHAP11masterUK.indd /12/ :36

4 Stand for integration of Aiphone panels 1. Upper and lower ventilations protected by metal grill 2. Opening at the back to: Screw the upper part to the lower part Access the cables 134 GLC CATA-CHAP11masterUK.indd /12/ :36

5 THE AIPHONE The stands are constructed in highstrength steel. Neutral finish in black decor no. 5 allows installation for any type of building. It was designed to comply with accessibility for the disabled. It is delivered in two parts for transport & storage. PA1604 GLC CATA-CHAP11masterUK.indd /12/ :36

6 Stands INTEGRATION OF AIPHONE PANEL Order the stand reference + adaptor panel if necessary. PANEL FOR INSTALLATION STAND REFERENCE HEIGHT ADAPTOR PANEL JP-DVF JO-DVF PA cm PJK GT (1xGF3F) PA cm none GT (2xGF3F) PA cm none GT (2xGF2F) PA cm P202F 136 GLC CATA-CHAP11masterUK.indd /12/ :36

7 PANEL FOR INSTALLATION STAND REFERENCE HEIGHT ADAPTOR PANEL AC-10F PA cm none Door release button for 60 mm housing PA cm PFP60 GLC CATA-CHAP11masterUK.indd /12/ :36

8 Electric door strikes EL serie > CHOOSE YOUR DOOR STRIKE Electric door strike: EL Electric Lock EL-12S Flush mount: E Surface mount: S 1 time transmit: 1T 2 time transmit: 2T Voltage breaker: RT Surface mount height in mm Reference EL E 1T ELE1T EL S 1T 90 ELS1T90 EL S 1T 120 ELS1T120 EL E 2T ELE2T EL S 2T 90 ELS2T90 EL S 2T 120 ELS2T120 EL E RT ELERT EL S RT 90 ELSRT90 EL S RT 120 ELSRT ST Standard face plate for all flush mount door strikes EXCEPT EL-12S Thickness 3 mm All the electric door strikes below are symmetrical and reversible EL-12S 1-time flush mount or surface mount Single stabilizer 12 VDC/200 ma 12 VAC/125 ma ELE1T 1-time flush mount 12 VDC/630 ma 12 VAC/540 ma ELE2T 2-time flush mount 12 VDC/630 ma 12 VAC/540 ma ELFX ELFX Door loop Stainless steel 30 cm Plastic end caps Cable max. diameter: 7 mm ELFX2 ELFX2 Door loop Stainless steel 45 cm Stainless steel end caps Cable max. diameter: 9 mm ELS1T90 1-time flush mount 90 mm 12 VDC/1.4 A 12 VAC/1.2 A ELS2T90 2-time surface mount 90 mm 12 VDC/1.4 A 12 VAC/1.2 A V 3 ELE2T ELE1T ELS1T90 ELS2T90 ELSRT90 ELSRT90 Voltage breaker surface mount 90 mm 12 VDC/160 ma ELERT Voltage breaker flush mount 12 VDC/200 ma ELS1T120 1-time surface mount 120 mm 12 VDC/1.4 A 12 VAC/1.2 A 250 ELERT ELS1T120 ELS2T120 ELSRT120 ELS2T120 2-time surface mount 120 mm 12 VDC/1.4 A 12 VAC/1.2 A ELSRT120 Voltage breaker surface mount 120 mm 12 VDC/160 ma 138 GLC CATA-CHAP11masterUK.indd /12/ :36

9 Magnetic locks V kg flush mount magnetic lock FEATURES V300 V VDC/500 ma 24 VDC/250 ma With back-plate V300, VM Contre-plaque V300SA 300 kg surface mount magnetic lock FEATURES V300SA V300SA 12 VDC/500 ma 24 VDC/250 ma With back-plate 45 V300SA, VM300SA Contre-plaque MAGNETIC LOCK OPTIONS AMLB2 bracket AMLB1 L-shaped aluminium bracket for surface mount magnetic lock V600SA. m AMLB1 AMLB2 AMLB1 bracket EZ bracket AMLB2 L-shaped aluminium bracket for surface mount magnetic lock V300SA. EZ Z-shaped aluminium tie wrap (used with ALMB1/ALMB2) for surface mount magnetic locks V300SA & V600SA. EZ Part A AMLB1 or AMLB2 AMLB1 or AMLB2 Magnetic lock Back-plate Part A Part B DOOR Magnetic lock Back-plate door opening direction Part B DOOR EZ door opening direction GLC CATA-CHAP11masterUK.indd /12/ :36

10 Door release buttons COMPATIBLE 60 mm diameter housing (housing not supplied) PNONF60 BPNONF60, PNONF60, BPNONFE60, PNONFE60, BPNONF60C, BPNONF60CV Housing not supplied BPNONF60C BPNONF60C mushroom-type button with N/O, N/C contact For improved accessibility: the button is larger (1 cm surface mounted) Tamper-proof screws supplied BPNONF60CV BPNONF60CV mushroom-type button with N/O, N/C contact For improved accessibility: the button is larger (1 cm surface mounted) Tamper-proof screws supplied Buzzer and integrated door release light To be supplied with 12 VDC PNONF60 button with N/O, N/C contact Tamper-proof screws supplied BPNONF60 button with N/O, N/C contact and engraving Tamper-proof screws supplied PNONF60 BPNONF60 PNONFE60 backlit button with N/O, N/C contact Tamper-proof screws supplied To be supplied with 12 VDC BPNONFE60 backlit button with N/O, N/C contact and engraving Tamper-proof screws supplied To be supplied with 12 VDC P PNONFE60 BPNONFE GLC CATA-CHAP11masterUK.indd /12/ :36

11 Door release buttons BPNONFC mushroom-type button with N/O, N/C contact For improved accessibility: the button is larger (1 cm surface mounted) Dimensions: 80 x 38 mm 10 28,4 BPNONFCV mushroom-type button with N/O, N/C contact For improved accessibility: the button is larger (1 cm surface mounted) Integrated buzzer Integrated call light Dimensions: 80 x 38 mm To be supplied with 12 VDC 80 BPNONFC 2 38 BPNONFCV PNONF button with N/O, N/C contact Dimensions: 80 x 38 mm BPNONFE backlit button with N/O, N/C contact and engraving Dimensions: 80 x 38 mm To be supplied with 12 VDC PNONF BPNONFE BPNONF button with N/O, N/C contact and engraving Dimensions: 80 x 38 mm CBP Hooded surface mount stainless steel box for: PNONF, BPNONF, BPNONFE, BPNONFC and BPNONFCV Dimensions CBP: 85 x 41 x 43 mm BPNONF CBP PNONF - BPNONF - BPNONFE BPNONFPCLE BPNONFPCLE Plastic surface mount button with engraving Dimensions: 86 x 86 x 25 mm GLC CATA-CHAP11masterUK.indd /12/ :36

12 Power supplies V/12 VAC/1.5 A power supply On DIN rail or screw-fixed (3-module) 3-module Thickness: 70 PS-0602DM 230 V/6 VDC/0.4 A power supply On DIN rail or screw-fixed (4-module) Ground connection is required 4-module PS-0602DM PS-1225DM Alimentation 230 V / 12 VDC / 2,5 A On DIN rail or screw-fixed (4-module) Ground connection is required 4-module PS-1225DM # # #40 PS-1820DM, 1 PS-2420DM GLC PS-2420DM 230 V/24 VDC/2 A switching power supply On DIN rail or screw-fixed (4-module) Ground connection is required 230 PS-1820DM 230 V/18 VDC/2 A switching power supply On DIN rail or screw-fixed (4-module) Ground connection is required module CATA-CHAP11masterUK.indd /12/ :36