Contents Section C - Inch ie Buttons ie Buttons, Counterbore elief - ight ress-fit Straight Shoulder _ O SS N S_ O SS N ages C2 & C3 ages C2 & C3 ie Buttons, Taper elief - ight ress-fit Straight Shoulder _T OT T SST NT S_T OT T SST NT ages C4 & C5 Ball-ock ie Buttons, Counterbore elief ages C4 & C5 Heavy ress-fit _ O SS N H_ O SS N ages C6 & C7 Counterbore elief..m. ie Button Blanks - ight ress-fit ages C6 & C7 Through Hole _C S_C _ S_ age C8 age C9 8-99 AG C1 Copyright, 1999 AI unch All ights eserved.
ie Buttons (Counterbore elief) ight ress-fit Steel: A2 (c. 60-63), M2 upon request 90 o ound 0 Shape +.001.0005 to.001 / to length available:.75,.87,.93 +, 1.00 1.12, 1.25, 1.50 180 o 270 o 0 o + straight press-fit only +.015 +.020.01.02.188 Straight ress-fit ress-in ead Body Catalog escription ength ound ange Shape iameter ange Code Hole Shapes /G 1/4 (.250) 25 90.75-1.12.064 -.135-3/8 (.375) 37.75-1.50.064 -.195.050 -.195 1/2 (.500) 50.75-1.50.064 -.285.064 -.285 5/8 (.625) 62.75-1.50.136 -.365.095 -.365 3/4 (.750) 75.75-1.50.136 -.435.118 -.435 7/8 (.875) 87.75-1.50.276 -.545.127 -.545 1 (1.000) 100.75-1.50.356 -.675.158 -.675 1 1/4 (1.250) 125 O.75-1.50.500 -.800.189 -.800 1 1/2 (1.500) 150.75-1.50.616-1.050.252-1.050 Straight +.010 +.00 -.01 H Shoulder G 180 Includes Square (use with & unches) Shoulder ress-fit /G 1/4 (.250) S25.75-1.25.064 -.135-3/8 (.375) S37.75-1.50.064 -.195.050 -.195 1/2 (.500) S50.75-1.50.064 -.285.064 -.285 5/8 (.625) S62.75-1.50.136 -.365.095 -.365 3/4 (.750) S75.75-1.50.136 -.435.118 -.435 7/8 (.875) S87.75-1.50.276 -.545.127 -.545 See Section K for 1 (1.000) S100 additional shape options See Section K for.75-1.50.356 -.675.158 -.675 standard profile options 1 1/4 (1.250) S125 SS N.75-1.50.500 -.800.189 -.800 1 1/2 (1.500) S150 270.75-1.50.616-1.050.252-1.050 AG C2 Inch ie Buttons 1 of 8 8-99 1999 AI unch 0
Ordering Information: Catalog escription (code/hole shape) over-all-length or, hole dimensions XAM: 6 87-O 1.25.206.406 ef. ef. Modified s M M M M M educed ength XAM: 6 87-O M 1.18.206.406 M recision ength. Same as M, except is held to +/-.001 XAM: 6 87-O M 1.250.206.406 educes and Modified standards See examples Code and elief 25.156.156 37.156.228 50.156.312 62.187.391 75.187.468 87.187.578 100.250.703 125.250.828 150.250 1.094 Head ia. Code H S25.156.156.375 S37.156.228.500 S50.156.312.625 S62.187.391.750 S75.187.468.875 S87.187.578 1.000 S100.250.703 1.125 S125.250.828 1.375 S150.250 1.094 1.625 T ef. MH H ef. B or MB ef. 1.87 Min. MSB MT educed Head Thickness T (shortens ) XAM: 6 S87-O 1.19.206.406 MT.125 MT recision Head Thickness T. Same as MT except T is held to +/-.0005 XAM: XAM: 6 S87-O 1.25.206.406 MT.188 MH 1.37 Min. educed Head iameter H (min. -.001) M ef. XAM: 6 S87-O 1.25.206 B.406 MH.94 MKF/MS key flat or dowel slot locations may be specified using the proper code letters, MKF or MS with degrees counter clockwise from 0 O as shown. See Section K for addtional information. XAM: 6 87-O 1.25.206.406 MKF210 O MKF210 O MT MT MS210 O 8-99 Inch ie Buttons 2 of 8 AG C3 1999 AI unch
ie Buttons (Taper elief) ight ress-fit Steel: A2 (c. 60-63), M2 upon request 90 o ound 0 Shape +.001.0005 to.001 / to length available:.75,.87, 1.00, 1.12, 1.25, 1.50 180 o 270 o 0 o * * +.0006 >1.50 +.015 +.020.01.02 Straight ress-fit Body Catalog escription ength ound ange Shape iameter ange Code Hole Shapes /G 1/4 (.250) 25 90.75-1.25.050 -.170.050 -.170 3/8 (.375) 37.75-1.50.075 -.255.050 -.255 1/2 (.500) 50.75-1.50.150 -.344.095 -.344 5/8 (.625) 62.75-1.50.188 -.425.095 -.425 3/4 (.750) 75.75-1.50.225 -.510.095 -.510 7/8 (.875) 87.75-1.50.300 -.595.127 -.595 1 (1.000) 100 T.75-1.50.400 -.680.158 -.680 1 1/4 (1.250) 125 OT.75-1.50.500 -.850.158 -.850 1 1/2 (1.500) 150.75-1.50.600-1.050.158-1.050 1 3/4 (1.750) 175.75-1.50.750-1.400.158-1.400 2 (2.000) 200.75-1.50.875-1.600.158-1.600 G 2 1/4 (2.250) 225.75-1.50 1.000-1.800.314-1.800 2 1/2 (2.500) 250.75-1.50 1.125-2.000.314-2.000 2 3/4 (2.750) 275 180 0.75-1.50 1.250-2.200.314-2.200 T Includes Square (Use with & unches) Shoulder ress-fit /G 1/4 (.250) S25.75-1.25.050 -.170.050 -.170 3/8 (.375) S37.75-1.50.075 -.255.050 -.255 1/2 (.500) S50.75-1.50.150 -.344.095 -.344 5/8 (.625) S62.75-1.50.188 -.425.095 -.425 3/4 (.750) S75.75-1.50.225 -.510.095 -.510 7/8 (.875) S87 See Section K for See Section K for.75-1.50.300 -.595.127 -.595 additional shape options standard profile options 1 (1.000) S100.75-1.50.400 -.680.158 -.680 SST NT 1 1/4 (1.250) S125.75-1.50.500 -.850.158 -.850 1 1/2 (1.500) S150 270.75-1.50.600-1.050.158-1.050 AG C4 Inch ie Buttons 3 of 8 8-99 1999 AI unch ress-in ead Included 3/4 O Taper Straight +.010.188 +.00 -.01 H Shoulder
Ordering Information: Catalog escription (code/hole shape) over-all-length or, hole dimensions XAM: 6 87-OT 1.25.206.406 M Modified s M /G dimensions larger than standard XAM: 6 87-OT 1.25.206 M.627 M Body 25 37 50 62 75 Max /G.190.290.390.500.600 Body 87 100 125 150 Max /G.700.800 1.000 1.200 Modified standards See examples ef. ef. M M M M M educed ength XAM: 6 87-OT M 1.19.206.406 M recision ength. Same as M, except is held to +/-.001 XAM: 6 87-OT M 1.250.206.406 Code Min. and 25.156 37.156 50.156 62.187 75.187 87.187 100.250 125.250 150.250 175.312 200.312 225.312 250.312 275.312 Head ia. Code H S25.156.375 S37.156.500 S50.156.625 S62.187.750 S75.187.875 S87.187 1.000 S100.250 1.125 S125.250 1.375 S150.250 1.625 T ef. MH H ef. MT MT MT educed Head Thickness T (shortens ) XAM: 6 S87-OT 1.19.206.406 MT.125 MT recision Head Thickness T. Same as MT except T is held to +/-.0005 XAM: 6 S87-OT 1.25.206.406 MT.188 MH educed Head iameter H (min. -.001) XAM: 6 S87-OT 1.25.206.406 MH.94 MKF/MS key flat or dowel slot locations may be specified using the proper code letters, MKF or MS with degrees counter clockwise from 0 O as shown. See Section K for addtional information. XAM: 6 87-OT 1.25.206.406 MS210 O MKF210 O MS210 O 8-99 Inch ie Buttons 4 of 8 AG C5 1999 AI unch
Ball ock & Heavy ress-fit ie Buttons (Counterbore elief) Steel: A2 (c. 60-63) M2 upon request 90 o ound 0 Shape +.001.0005 to.001 / to Ball-seat location is standard at 90, standard key flat/dowel slot location at 0 o 180 o 270 o 0 o +.015 +.015 ight-uty Ball-ock Body Catalog escription ength ound ange Shape iameter ange Code Hole Shapes /G 1/2 (.500) 50 90.064 -.195.050 -.195 5/8 (.625) 62.126 -.285.064 -.285 3/4 (.750) 75.196 -.345.095 -.345 7/8 (.875) 87.286 -.435.127 -.435 1 (1.000) 100 1.18.346 -.545.158 -.545 1 1/4 (1.250) 125.436 -.655.189 -.655 1 1/2 (1.500) 150.546 -.780.220 -.780 1 3/4 (1.750) 175 O.656-1.035.252-1.035 Ball-ock Heavy ress-fit ress-in ead G 180 Includes Square (use with & unches) 0 Heavy ress-fit /G 3/8 (.375) H37.064 -.195.050 -.195 1/2 (.500) H50.116 -.285.062 -.285 5/8 (.625) H62.93.149 -.365.095 -.365 3/4 (.750) H75.136 -.435.118 -.435 & 7/8 (.875) H87 See Section K for See Section K for.296 -.545.127 -.545 additional shape options standard profile options 1 (1.000) H100 1.12.360 -.675.158 -.675 SS N 1 1/4 (1.250) H125.506 -.800.189 -.800 1 1/2 (1.500) H150 270.725-1.050.252-1.050 AG C6 Inch ie Buttons 5 of 8 8-99 1999 AI unch
Ordering Information: Catalog escription (code/hole shape) over-all-length or, hole dimensions XAM: 6 H87-O 1.12.206.406 Modified s M educed ength XAM: 6 H87-O M 1.00.206.406 M recision ength. Same as M, except is held to ±.001 XAM: 6 H87-O M 1.125.206.406 ef. M M Modified standards See examples Code and elief Body Tolerance 50.156.228.0003/.0007 62.187.312.0003/.0007 75.187.375.0003/.0007 87.187.468.0003/.0007 100.250.578.0003/.0007 125.250.687.0003/.0007 150.250.812.0003/.0007 175.312 1.062.0003/.0007 Code Tolerance H37.156.228 /+.0008 H50.156.312 /+.0008 H62.187.391 +.0010/+.0014 H75.187.468 +.0010/+.0014 H87.187.578 +.0010/+.0014 H100.250.703 +.0010/+.0014 H125.250.828 +.0015/+.0020 H150.250 1.094 +.0015/+.0020 90 o 180 o 0 o 270 o MBS=210 o MBS ball-seat locations may be specified using MBS and degrees, counter clockwise from 0 o. See Section K for additional information. XAM: 6 87-O.206.406 MBS210 MKF/MS key flat or dowel slot locations may be specified using the proper code letters, MKF or MS with degrees counter clockwise from 0 O as shown. See Section K for addtional information. XAM: 6 H87-O 1.12.206.406 MKF210 O MKF210 O MS210 O 8-99 Inch ie Buttons 6 of 8 AG C7 1999 AI unch
ight ress-fit M ie Button Blanks (Counterbore elief) Steel: M2 (c. 60-63) Triple Tempered Ordering Information: Catalog escription (code/type) over-all-length length available:.75,.87,.93 +, 1.00, 1.12, 1.25, 1.50 XAM: 6 87-C 1.25 +straight press-fit only Straight ress-fit.005.005 / to Body Cat esc. ength Start Max. Max. ia ange Hole and elief Code Type 3/8 (.375) 37-C.75-1.50.032.25.228 1/2 (.500) 50-C.75-1.50.032.25.312 5/8 (.625) 62-C.75-1.50.093.25.391 3/4 (.750) 75-C.75-1.50.093.31.468 7/8 (.875) 87-C.75-1.50.093.31.578 1 (1.000) 100-C.75-1.50.093.31.703 1 1/4 (1.250) 125-C.75-1.50.125.37.828 1 1/2 (1.500) 150-C.75-1.50.125.37 1.094 +.015 ress-in ead Shoulder ress-fit.005.005 / to Body Cat esc. ength Start Max. Max. Head ia ange Hole and elief ia. Code Type H 3/8 (.375) S37-C.75-1.50.032.25.228.500 1/2 (.500) S50-C.75-1.50.032.25.312.625 5/8 (.625) S62-C.75-1.50.093.25.391.750 3/4 (.750) S75-C.75-1.50.093.31.468.875 7/8 (.875) S87-C.75-1.50.093.31.578 1.000 1 (1.000) S100-C.75-1.50.093.31.703 1.125 +.020.188.01.02 1 1/4 (1.250) S125-C.75-1.50.125.37.828 1.375 1 1/2 (1.500) S150-C.75-1.50.125.37 1.094 1.625 +.010 H +.00.01 AG C8 Inch ie Buttons 7 of 8 8-99 1999 AI unch
ight ress-fit M ie Button Blanks (Through Hole) Steel: M2 (c. 60-63) Triple Tempered Ordering Information: Catalog escription (code/type) over-all-length length available:.75,.87,.93 + 1.00, 1.12, 1.25, 1.50 XAM: 6 87-1.25 +straight press-fit only Straight ress-fit.005.005 / to Body Cat esc. ength Start ia ange Hole Code Type 1/4 (.250) 25-.75-1.25.032 3/8 (.375) 37-.75-1.50.032 1/2 (.500) 50-.75-1.50.062 5/8 (.625) 62-.75-1.50.062 3/4 (.750) 75-.75-1.50.062 7/8 (.875) 87-.75-1.50.062 1 (1.000) 100-.75-1.50.062 1 1/4 (1.250) 125-.75-1.50.062 1 1/2 (1.500) 150-.75-1.50.062 1 3/4 (1.750) 175-.75-1.50.125 2 (2.000) 200-.75-1.50.125 2 1/4 (2.250) 225-.75-1.50.125 2 1/2 (2.500) 250-.75-1.50.125 2 3/4 (2.750) 275-.75-1.50.125 +.015 ress-in ead Shoulder ress-fit.005.005 / to Body Cat esc. ength Start Head ia ange Hole ia. Code Type H 1/4 (.250) S25-.75-1.25.032.375 3/8 (.375) S37-.75-1.50.032.500 1/2 (.500) S50-.75-1.50.062.625 5/8 (.625) S62-.75-1.50.062.750 3/4 (.750) S75-.75-1.50.062.875 +.020.01.02 7/8 (.875) S87-.75-1.50.062 1.000 1 (1.000) S100-.75-1.50.062 1.125 1 1/4 (1.250) S125-.75-1.50.062 1.375 1 1/2 (1.500) S150-.75-1.50.062 1.625 +.010.000.188 +.00.01 H 8-99 Inch ie Buttons 8 of 8 AG C9 1999 AI unch