ProfileSolutions ALUMINIUM PROFILE & ACCESSORIES LEAK DETECTION + AUTOMATION TECHNOLOGY
|
|
- James Terry
- 5 years ago
- Views:
Transcription
1 Solutions EAK DETECTION + AUTOMATION TECHNOOGY AUMINIUM PROFIE & ACCESSORIES Our aluminium profiles are manufactured using high grade A6N0S-T aluminium and provided with longitudinal slots used to house nuts and specialised connection systems enabling easy but strong connections with adjacent profiles, brackets or anything else. Used for machine structural frames, conveyors, workbenches, shelving systems etc. The possibilities are endless, limited only to your imagination. This catalogue exhibits the basic range of profile and accessories. For further information and detailed specifications please contact Solutions.
2 OUR PROFIE RANGE SP SP SP P P RP SP SP P P SP SP SP GR23 P SP RP SP SP GR SP SP SP P P RP SP P SP- GR4 SP- RP P Nuts, Bolts & s Feet & Castors Aluminium brackets Steel brackets Steel s
3 PROFIE SECTION DATA & PRICING Type Type Type P/N SP RP SP SP SP RP SP- GR4 SP SP SP SP RP SP SP RP SP- GR SP SP SP SP SP Type Square profile closed side Sliding door guide 2 channel Square profile closed side Sliding door guide 3 channel X Y Slot Weight 2 nd Area Moment Area /m mm mm Type kg/m x y Cross Section (6m lengths) End Cap Part Number SC SCR SC SC SC SCR SC SC SC SC SCR SC SC SCR SC SC SC SC SC each Type (ight Duty) P P P P P P C C C C C C Type (ight Duty) P GR23 P P Sliding door guide 3 channel C C C mm mm kg/m x0cm 4 mm 2 Standard length: 6 meters Cutting charge: 2.0 per cut Drilling charge: 2.00 per hole (straight or counterbore) Tapping charge: 2.0 per profile end s subject to change without notice and Slot Detail Type (Standard) Type (ight) Type (Standard) Type (ight) Type (Standard)
4 PROFIE DEFECTION UNDEROAD DATA P ength Point a Weight w Point b Deflection d One-side support W SP SP y SP y x 06 SP y SP SP y SP x SP SP x SP x 0 7 x a (kgf) b Both-sided support W /2 0.0 Both-sided fixed 0. W 0.0 / x 0 4 (mm 4 ) Note: The x or y donates the vertical orientation of the profile. 0 Example: SP profile, meter long with kg weight Deflection = One side support 3.2mm Both sides supported 0.2mm Both sides fixed 0.0mm 0 Method:. Obtain P and values and project a line to get point a on the graph. 2. Obtain W and project a line from point a to get point b on the graph. 3. Extend the line horizontally to the corresponding support method. 4. Read the value which is the amount of deflection the beam with exhibit.
5 FB 7. DSB00-8 0x0x3 FB 9. FB 9.8 DSB28-6 xx2 FB.0 DSB70-8 0x7x3 FB 9.8 FB 4.00 DSB2-6 2x GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide GJ kg mm Base, Mx00 high 6. DCB-6 xx wide SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide SC 00kg x32 Wheel.00 DCB3-8 xx3 wide SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide WZ-T WZ-XS DSB2-6 xx2 wide 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 4.0 Hole 2mm DSB-6 xx wide WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide 4xx.74 WZ-GY DSB7-8 xx7 wide 0xx DSB7-8 xx7 wide WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 DIB xx0. DBS-M M nut 8x8x2 DIB xx DBS-M6 M6 nut 8x8x3 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x WZ-HY x 6. DBS-M6 M6 nut 4x4x6 WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x6. WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x6. DBSQ-M8-2 M8 nut 2xx6. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M4 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M4 PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 Part DSN-M Spring nut M Number each DSN-M6 Spring nut M6 SHCSM6X6ZP 0. DSN-M8 Spring nut M8 SHCSM6XZP 0.2 DTN-M3 T slot nut M3 SHCSM8X2ZP 0.8 DTN-M4 T slot nut M4 SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 SHCSM8XZP 0. DTN-M4 T slot nut M4 BSHCSMX6ZP 0. DTN-M T slot nut M BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 BSHCSM8X6ZP 0.37 DTN-M T slot nut M BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 WM6X2SZP 0.02 DN-M M6 ong nut x8x WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 WM8X22SZP 0.0 DSB-6 x FB 7. DSB00-8 0x0x3 FB 9. FB 9.8 DSB28-6 xx2 FB.0 DSB70-8 0x7x3 FB 9.8 FB 4.00 DSB2-6 2x GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide GJ kg mm Base, Mx00 high 6. DCB-6 xx wide SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide SC 00kg x32 Wheel.00 DCB3-8 xx3 wide SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide WZ-T WZ-XS DSB2-6 xx2 wide 6xx39 (Hole 2mm) 2xx DSB-6 xx wide t 4.0 Hole 2mm DSB-6 xx wide WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide 4xx.74 WZ-GY DSB7-8 xx7 wide 0xx DSB7-8 xx7 wide WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated ew M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 DIB xx0. DBS-M M nut 8x8x2 DIB xx DBS-M6 M6 nut 8x8x3 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x WZ-HY x 6. DBS-M6 M6 nut 4x4x6 WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x6. WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x6. DBSQ-M8-2 M8 nut 2xx6. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M4 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M4 PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 Part DSN-M Spring nut M Number each DSN-M6 Spring nut M6 SHCSM6X6ZP 0. DSN-M8 Spring nut M8 SHCSM6XZP 0.2 DTN-M3 T slot nut M3 SHCSM8X2ZP 0.8 DTN-M4 T slot nut M4 SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 SHCSM8XZP 0. DTN-M4 T slot nut M4 BSHCSMX6ZP 0. DTN-M T slot nut M BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 BSHCSM8X6ZP 0.37 DTN-M T slot nut M BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 WM6X2SZP 0.02 DN-M M6 ong nut x8x WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 WM8X22SZP 0.0 DSB-6 x FB 7. DSB00-8 0x0x3 FB 9. FB 9.8 DSB28-6 xx2 FB.0 DSB70-8 0x7x3 FB 9.8 FB 4.00 DSB2-6 2x GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide GJ kg mm Base, Mx00 high 6. DCB-6 xx wide SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide SC 00kg x32 Wheel.00 DCB3-8 xx3 wide SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide WZ-T WZ-XS DSB2-6 xx2 wide 6xx39 (Hole 2mm) 2xx DSB-6 xx wide Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide 4xx.74 WZ-GY DSB7-8 xx7 wide 0xx DSB7-8 xx7 wide WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Number Slot/ Each DIB DIB DIB DIB (3 ) DIB (3 ) 2x2x0 xx0 xx DJC- DJC-6 DJC-8 9x8x M 28x0x8 M6 38x4x M SJB SJB SJB SJB x 4x2. 0x WZ-HY WZ-HY WZ-HY x 4x2. 0x WZ-ZBS-M8 WZ-ZBS-M0 / / 39x26 M8 Female 39x26 Suit M6 bolt DAJ-06 DAJ-08 Precision cast zinc Precision cast zinc PE- PE- PE- PE Part Number Each Socket Head Cap Screw SHCSM6X6ZP SHCSM6XZP SHCSM8X2ZP SHCSM8X6ZP SHCSM8XZP M6x6 long, zinc plated M6x long, zinc plated M8x2 long, zinc plated M8x6 long, zinc plated M8x long, zinc plated Button Head BSHCSMX6ZP BSHCSM6X6ZP BSHCSM6XZP BSHCSM8X6ZP BSHCSM8XZP Mx6 long, zinc plated M6x6 long, zinc plated M6x long, zinc plated M8x6 long, zinc plated M8x long, zinc plated WM6X2SZP WM6XSZP WM8X6SZP WM8X22SZP Flat washer M6x2 OD, zinc plated Flat washer M6x OD, zinc plated Flat washer M8x6 OD, zinc plated Flat washer M8x22 OD, zinc plated FB FB FB FB FB FB SNF SNF SNF Suit profile SP M2 Suit profile SP M2 Suit profile SP M2 Suit profile SP M2 Suit profile SP M2 Suit profile SP M2 Suit profile SP M6 Suit profile SP M8 Suit profile SP M Adjustable Foot GJX-08 GJX-000 GJX-200 GJ-600 GJ-00 0kg 0kg 0kg 000kg 000kg mm Base, M8x high mm Base, M0x00 high mm Base, M2x00 high mm Base, M6x00 high mm Base, Mx00 high mm Castors 0kg 0kg 0kg 0kg 0kg Swivel with brake, bolt mount Swivel, bolt mount Swivel with brake, plate mount Swivel, plate mount Fixed, plate mount Rod Flange WZ-T 4.0 6xx39 Hole 2mm Rod > Rod WZ-XS 3.0 2xx Hole 2mm Guide Rail WZ-ZI-S.74 4xx62. WZ-ZJ-M xx WZ-ZJ-T2 9. 0x44x82 Rod Sensor WZ-GY 4.2 0xx Hole 9mm Guide Rod 2x0 4.0 Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 DIB xx0. DBS-M M nut 8x8x2 DIB xx DBS-M6 M6 nut 8x8x3 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x WZ-HY x 6. DBS-M6 M6 nut 4x4x6 WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x6 WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x6 DBSQ-M8-2 M8 nut 2xx6 DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M4 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M4 PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 Part DSN-M Spring nut M Number each DSN-M6 Spring nut M6 SHCSM6X6ZP 0. DSN-M8 Spring nut M8 SHCSM6XZP 0.2 DTN-M3 T slot nut M3 SHCSM8X2ZP 0.8 DTN-M4 T slot nut M4 SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 SHCSM8XZP 0. DTN-M4 T slot nut M4 BSHCSMX6ZP 0. DTN-M T slot nut M BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 BSHCSM8X6ZP 0.37 DTN-M T slot nut M BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 WM6X2SZP 0.02 DN-M M6 ong nut x WM6XSZP 0.03 DN-M6 M8 ong nut 0 WM8X6SZP 0.04 DN-M8 M8 ong nut 0 WM8X22SZP 0.0 DSB-6 x FB 7. DSB00-8 0x0x3 FB 9. FB 9.8 DSB28-6 xx2 FB.0 DSB70-8 0x7x3 FB 9.8 FB 4.00 DSB2-6 2x GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide GJ kg mm Base, Mx00 high 6. DCB-6 xx wide SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide SC 00kg x32 Wheel.00 DCB3-8 xx3 wide SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide WZ-T WZ-XS DSB2-6 xx2 wide 6xx39 (Hole 2mm) 2xx DSB-6 xx wide Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide 4xx.74 WZ-GY DSB7-8 xx7 wide 0xx DSB7-8 xx7 wide WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 DIB xx0. DBS-M DIB xx DBS-M6 DJC- 9x8x - M 0.3 DBS-M4 DJC-6 28x0x8 - M6 0.4 DBS-M DJC-8 38x4x - M8 0.0 DBS-M6 WZ-HY x 6. DBS-M6 WZ-HY 4x2. 7. DBS-M8 WZ-HY 0x 8. DBSQ-M6 WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 DBSQ-M8-2 DAJ-06 Precision cast zinc 9.00 DSN-M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 DSN-M PE- Slot cover - Polyethylene 2.63 DSN-M4 PE- Slot cover - Polyethylene 2.63 DSN-M PE- Slot cover - Polyethylene 2.7 DSN-M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Part DSN-M Number each DSN-M6 SHCSM6X6ZP 0. DSN-M8 SHCSM6XZP 0.2 DTN-M3 SHCSM8X2ZP 0.8 DTN-M4 SHCSM8X6ZP 0.9 DTN-M3 SHCSM8XZP 0. DTN-M4 BSHCSMX6ZP 0. DTN-M BSHCSM6X6ZP 0.26 DTN-M3 BSHCSM6XZP 0.29 DTN-M4 BSHCSM8X6ZP 0.37 DTN-M BSHCSM8XZP 0.37 DTN-M6 WM6X2SZP 0.02 DN-M WM6XSZP 0.03 DN-M6 WM8X6SZP 0.04 DN-M8 WM8X22SZP 0.0 DSB-6 3 FB 7. DSB FB 9. FB 9.8 DSB FB.0 DSB FB 9.8 FB 4.00 DSB2-6 3 GJX-08 0kg mm Base, M8x high 7.2 DSB GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2 GJ kg mm Base, M6x00 high 4. DCB2-6 3 GJ kg mm Base, Mx00 high 6. DCB-6 3 SCK 00kg x32 Wheel with lock 9. DCB-6 3 SC 00kg x32 Wheel.00 DCB3-8 4 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 4 SC00 0kg 00x32 Wheel. DCB SC2K kg 2x32 Wheel with lock 22. DSB-6 2 SC2 kg 2x32 Wheel 9. DSB3-6 2 WZ-T WZ-XS DSB2-6 3 Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Slo Pro M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 DIB xx0. DBS-M DIB xx DBS-M6 DJC- 9x8x - M 0.3 DBS-M4 DJC-6 28x0x8 - M6 0.4 DBS-M DJC-8 38x4x - M8 0.0 DBS-M6 WZ-HY x 6. DBS-M6 WZ-HY 4x2. 7. DBS-M8 WZ-HY 0x 8. DBSQ-M6 WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 DBSQ-M8-2 DAJ-06 Precision cast zinc 9.00 DSN-M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 DSN-M PE- Slot cover - Polyethylene 2.63 DSN-M4 PE- Slot cover - Polyethylene 2.63 DSN-M PE- Slot cover - Polyethylene 2.7 DSN-M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Part DSN-M Number each DSN-M6 SHCSM6X6ZP 0. DSN-M8 SHCSM6XZP 0.2 DTN-M3 SHCSM8X2ZP 0.8 DTN-M4 SHCSM8X6ZP 0.9 DTN-M3 SHCSM8XZP 0. DTN-M4 BSHCSMX6ZP 0. DTN-M BSHCSM6X6ZP 0.26 DTN-M3 BSHCSM6XZP 0.29 DTN-M4 BSHCSM8X6ZP 0.37 DTN-M BSHCSM8XZP 0.37 DTN-M6 WM6X2SZP 0.02 DN-M WM6XSZP 0.03 DN-M6 WM8X6SZP 0.04 DN-M8 WM8X22SZP 0.0 DSB-6 FB 7. DSB00-8 FB 9. FB 9.8 DSB28-6 FB.0 DSB70-8 FB 9.8 FB 4.00 DSB2-6 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 GJ kg mm Base, M6x00 high 4. DCB2-6 GJ kg mm Base, Mx00 high 6. DCB-6 SCK 00kg x32 Wheel with lock 9. DCB-6 SC 00kg x32 Wheel.00 DCB3-8 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 SC00 0kg 00x32 Wheel. DCB77-8 SC2K kg 2x32 Wheel with lock 22. DSB-6 SC2 kg 2x32 Wheel 9. DSB3-6 WZ-T WZ-XS DSB2-6 Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Sl Pr M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 DIB xx0. DBS-M M nut 8x8x2 DIB xx DBS-M6 M6 nut 8x8x3 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x WZ-HY x 6. DBS-M6 M6 nut 4x4x6 WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x6. WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x6. DBSQ-M8-2 M8 nut 2xx6. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M4 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M4 PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 Part DSN-M Spring nut M Number each DSN-M6 Spring nut M6 SHCSM6X6ZP 0. DSN-M8 Spring nut M8 SHCSM6XZP 0.2 DTN-M3 T slot nut M3 SHCSM8X2ZP 0.8 DTN-M4 T slot nut M4 SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 SHCSM8XZP 0. DTN-M4 T slot nut M4 BSHCSMX6ZP 0. DTN-M T slot nut M BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 BSHCSM8X6ZP 0.37 DTN-M T slot nut M BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 WM6X2SZP 0.02 DN-M M6 ong nut x8x WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x WM8X22SZP 0.0 DSB-6 x FB 7. DSB00-8 0x0x3 FB 9. FB 9.8 DSB28-6 xx2 FB.0 DSB70-8 0x7x3 FB 9.8 FB 4.00 DSB2-6 2x GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide GJ kg mm Base, Mx00 high 6. DCB-6 xx wide SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide SC 00kg x32 Wheel.00 DCB3-8 xx3 wide SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide WZ-T WZ-XS DSB2-6 xx2 wide 6xx39 (Hole 2mm) 2xx DSB-6 xx wide Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide 4xx.74 WZ-GY DSB7-8 xx7 wide 0xx DSB7-8 xx7 wide WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut WZ-HY x 6. DBS-M6 WZ-HY 4x2. 7. DBS-M8 WZ-HY 0x 8. DBSQ-M6 WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 DBSQ-M8-2 DAJ-06 Precision cast zinc 9.00 DSN-M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 DSN-M PE- Slot cover - Polyethylene 2.63 DSN-M4 PE- Slot cover - Polyethylene 2.63 DSN-M PE- Slot cover - Polyethylene 2.7 DSN-M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Part DSN-M Number each DSN-M6 SHCSM6X6ZP 0. DSN-M8 SHCSM6XZP 0.2 DTN-M3 SHCSM8X2ZP 0.8 DTN-M4 SHCSM8X6ZP 0.9 DTN-M3 SHCSM8XZP 0. DTN-M4 BSHCSMX6ZP 0. DTN-M BSHCSM6X6ZP 0.26 DTN-M3 BSHCSM6XZP 0.29 DTN-M4 BSHCSM8X6ZP 0.37 DTN-M BSHCSM8XZP 0.37 DTN-M6 WM6X2SZP 0.02 DN-M WM6XSZP 0.03 DN-M6 WM8X6SZP 0.04 DN-M8 WM8X22SZP 0.0 DSB-6 FB 7. DSB00-8 FB 9. FB 9.8 DSB28-6 FB.0 DSB70-8 FB 9.8 FB 4.00 DSB2-6 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 GJ kg mm Base, M6x00 high 4. DCB2-6 GJ kg mm Base, Mx00 high 6. DCB-6 SCK 00kg x32 Wheel with lock 9. DCB-6 SC 00kg x32 Wheel.00 DCB3-8 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 SC00 0kg 00x32 Wheel. DCB77-8 SC2K kg 2x32 Wheel with lock 22. DSB-6 SC2 kg 2x32 Wheel 9. DSB3-6 WZ-T WZ-XS DSB2-6 6xx39 (Hole 2mm) 2xx DSB-6 Rod flange bracket 4.0 Hole 2mm DSB-6 WZ-ZI-S 4xx 3.0 DSB3-8 4xx.74 WZ-GY DSB7-8 0xx DSB7-8 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part Pri ea DIB 2x2x0. DBS-M4 M4 nut 8x8x2 DIB xx0. DBS-M M nut 8x8x2 DIB xx DBS-M6 M6 nut 8x8x3 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x WZ-HY x 6. DBS-M6 M6 nut 4x4x6 WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x6. WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x6. DBSQ-M8-2 M8 nut 2xx6. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M4 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M4 PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 Part DSN-M Spring nut M Number each DSN-M6 Spring nut M6 SHCSM6X6ZP 0. DSN-M8 Spring nut M8 SHCSM6XZP 0.2 DTN-M3 T slot nut M3 SHCSM8X2ZP 0.8 DTN-M4 T slot nut M4 SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 SHCSM8XZP 0. DTN-M4 T slot nut M4 BSHCSMX6ZP 0. DTN-M T slot nut M BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 BSHCSM8X6ZP 0.37 DTN-M T slot nut M BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 WM6X2SZP 0.02 DN-M M6 ong nut x8x WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 WM8X22SZP 0.0 DSB-6 x FB 7. DSB00-8 0x0x3 FB 9. FB 9.8 DSB28-6 xx2 FB.0 DSB70-8 0x7x3 FB 9.8 FB 4.00 DSB2-6 2x GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide GJ kg mm Base, Mx00 high 6. DCB-6 xx wide SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide SC 00kg x32 Wheel.00 DCB3-8 xx3 wide SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide WZ-T WZ-XS DSB2-6 xx2 wide 6xx39 (Hole 2mm) 2xx DSB-6 xx wide bracket 4.0 Hole 2mm DSB-6 xx wide WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide 4xx.74 WZ-GY DSB7-8 xx7 wide 0xx DSB7-8 xx7 wide WZ-ZI- Hole 9mm 79xx sory le foot Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated ase Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated cap screw head her sory M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated astor ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 od flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated ket head cap screw M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Number Slot/ Each DBS-M4 DBS-M DBS-M6 M4 nut 8x8x2 M nut 8x8x2 M6 nut 8x8x DBS-M4 DBS-M DBS-M6 M4 nut 0x0x M nut 0x0x M6 nut 0x0x DBS-M6 DBS-M8 M6 nut 4x4x6 M8 nut 4x4x DBSQ-M6 M6 nut 0x2x 0. DBSQ-M6-46 DBSQ-M8-46 DBSQ-M8-2 M6 nut 4x6x6. M8 nut 4x4x6. M8 nut 2xx DSN-M3 DSN-M4 DSN-M Spring nut M3 Spring nut M4 Spring nut M DSN-M4 DSN-M DSN-M6 Spring nut M4 Spring nut M Spring nut M DSN-M4 DSN-M DSN-M6 DSN-M8 Spring nut M4 Spring nut M Spring nut M6 Spring nut M DTN-M3 DTN-M4 T slot nut M3 T slot nut M DTN-M3 DTN-M4 DTN-M T slot nut M3 T slot nut M4 T slot nut M DTN-M3 DTN-M4 DTN-M DTN-M6 T slot nut M3 T slot nut M4 T slot nut M T slot nut M ong Nut DN-M M6 ong nut x8x. DN-M6 M8 ong nut 0x0x6 2. DN-M8 M8 ong nut 0x4x8 3. DSB-6 x 3. DSB00-8 0x0x3.0 DSB28-6 xx2 2. DSB70-8 0x7x3. Joint DSB2-6 2x.9 DSB37-8 3x7 2. Right Angle s (Cast DCB2-6 DCB2-6 DCB-6 DCB-6 DCB3-8 DCB7-8 DCB77-8 2x2x8 wide xx2 wide xx wide xx wide xx3 wide xx7 wide 7x7x7 wide Right Angle s (Steel) DSB-6 DSB3-6 DSB2-6 DSB-6 DSB-6 DSB3-8 DSB7-8 DSB7-8 xx wide xx3 wide xx2 wide xx wide xx wide xx3 wide xx7 wide xx7 wide Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 DIB xx0. DBS-M M nut 8x8x2 DIB xx DBS-M6 M6 nut 8x8x3 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x WZ-HY x 6. DBS-M6 M6 nut 4x4x6 WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x6. WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x6. DBSQ-M8-2 M8 nut 2xx6. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M4 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M4 PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 Part DSN-M Spring nut M Number each DSN-M6 Spring nut M6 SHCSM6X6ZP 0. DSN-M8 Spring nut M8 SHCSM6XZP 0.2 DTN-M3 T slot nut M3 SHCSM8X2ZP 0.8 DTN-M4 T slot nut M4 SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 SHCSM8XZP 0. DTN-M4 T slot nut M4 BSHCSMX6ZP 0. DTN-M T slot nut M BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 BSHCSM8X6ZP 0.37 DTN-M T slot nut M BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 WM6X2SZP 0.02 DN-M M6 ong nut x8x WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 WM8X22SZP 0.0 DSB-6 x FB 7. DSB00-8 0x0x3 FB 9. FB 9.8 DSB28-6 xx2 FB.0 DSB70-8 0x7x3 FB 9.8 FB 4.00 DSB2-6 2x GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide GJ kg mm Base, Mx00 high 6. DCB-6 xx wide SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide SC 00kg x32 Wheel.00 DCB3-8 xx3 wide SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide WZ-T WZ-XS DSB2-6 xx2 wide 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 4.0 Hole 2mm DSB-6 xx wide Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part IB 2x2x0. DBS-M4 M4 nut 8x8x2 IB xx0. DBS-M M nut 8x8x2 IB xx DBS-M6 M6 nut 8x8x3 JC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x JC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x JC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x Z-HY x 6. DBS-M6 M6 nut 4x4x6 Z-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 Z-HY 0x 8. DBSQ-M6 M6 nut 0x2x Z-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x6. Z-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x6. DBSQ-M8-2 M8 nut 2xx6. AJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M3 AJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M4 DSN-M Spring nut M E- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M4 E- Slot cover - Polyethylene 2.63 DSN-M Spring nut M E- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M6 E-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 Part DSN-M Spring nut M Number each DSN-M6 Spring nut M6 HCSM6X6ZP 0. DSN-M8 Spring nut M8 HCSM6XZP 0.2 DTN-M3 T slot nut M3 HCSM8X2ZP 0.8 DTN-M4 T slot nut M4 HCSM8X6ZP 0.9 DTN-M3 T slot nut M3 HCSM8XZP 0. DTN-M4 T slot nut M4 SHCSMX6ZP 0. DTN-M T slot nut M SHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 SHCSM6XZP 0.29 DTN-M4 T slot nut M4 SHCSM8X6ZP 0.37 DTN-M T slot nut M SHCSM8XZP 0.37 DTN-M6 T slot nut M6 M6X2SZP 0.02 DN-M M6 ong nut x8x M6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 M8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 M8X22SZP 0.0 DSB-6 x B 7. DSB00-8 0x0x3 B 9. B 9.8 DSB28-6 xx2 B.0 DSB70-8 0x7x3 B 9.8 B 4.00 DSB2-6 2x JX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 JX-000 0kg mm Base, M0x00 high 8.2 JX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide J kg mm Base, M6x00 high 4. DCB2-6 xx2 wide J kg mm Base, Mx00 high 6. DCB-6 xx wide CK 00kg x32 Wheel with lock 9. DCB-6 xx wide C 00kg x32 Wheel.00 DCB3-8 xx3 wide C00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide C00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide C2K kg 2x32 Wheel with lock 22. DSB-6 xx wide C2 kg 2x32 Wheel 9. DSB3-6 xx3 wide WZ-T WZ-XS DSB2-6 xx2 wide 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 4.0 Hole 2mm DSB-6 xx wide WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide 4xx.74 WZ-GY DSB7-8 xx7 wide Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 DIB xx0. DBS-M M nut 8x8x2 DIB xx DBS-M6 M6 nut 8x8x3 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x WZ-HY x 6. DBS-M6 M6 nut 4x4x6 WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x6. WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x6. DBSQ-M8-2 M8 nut 2xx6. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M4 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M4 PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 Part DSN-M Spring nut M Number each DSN-M6 Spring nut M6 SHCSM6X6ZP 0. DSN-M8 Spring nut M8 SHCSM6XZP 0.2 DTN-M3 T slot nut M3 SHCSM8X2ZP 0.8 DTN-M4 T slot nut M4 SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 SHCSM8XZP 0. DTN-M4 T slot nut M4 BSHCSMX6ZP 0. DTN-M T slot nut M BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 BSHCSM8X6ZP 0.37 DTN-M T slot nut M BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 WM6X2SZP 0.02 DN-M M6 ong nut x8x WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 WM8X22SZP 0.0 DSB-6 x FB 7. DSB00-8 0x0x3 FB 9. FB 9.8 DSB28-6 xx2 FB.0 DSB70-8 0x7x3 FB 9.8 FB 4.00 DSB2-6 2x GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide GJ kg mm Base, Mx00 high 6. DCB-6 xx wide SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide SC 00kg x32 Wheel.00 DCB3-8 xx3 wide SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide WZ-T WZ-XS DSB2-6 xx2 wide 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 4.0 Hole 2mm DSB-6 xx wide WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide 4xx.74 WZ-GY DSB7-8 xx7 wide 0xx DSB7-8 xx7 wide WZ-ZI- Hole 9mm Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part Pr ea DIB 2x2x0. DBS-M4 M4 nut 8x8x2 DIB xx0. DBS-M M nut 8x8x2 DIB xx DBS-M6 M6 nut 8x8x3 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x WZ-HY x 6. DBS-M6 M6 nut 4x4x6 WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x6. WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x6. DBSQ-M8-2 M8 nut 2xx6. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M4 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M4 PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 Part DSN-M Spring nut M Number each DSN-M6 Spring nut M6 SHCSM6X6ZP 0. DSN-M8 Spring nut M8 SHCSM6XZP 0.2 DTN-M3 T slot nut M3 SHCSM8X2ZP 0.8 DTN-M4 T slot nut M4 SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 SHCSM8XZP 0. DTN-M4 T slot nut M4 BSHCSMX6ZP 0. DTN-M T slot nut M BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 BSHCSM8X6ZP 0.37 DTN-M T slot nut M BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 WM6X2SZP 0.02 DN-M M6 ong nut x8x WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 WM8X22SZP 0.0 DSB-6 x FB 7. DSB00-8 0x0x3 FB 9. FB 9.8 DSB28-6 xx2 FB.0 DSB70-8 0x7x3 FB 9.8 FB 4.00 DSB2-6 2x GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide GJ kg mm Base, Mx00 high 6. DCB-6 xx wide SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide SC 00kg x32 Wheel.00 DCB3-8 xx3 wide SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide WZ-T WZ-XS DSB2-6 xx2 wide 6xx39 (Hole 2mm) 2xx DSB-6 xx wide racket 4.0 Hole 2mm DSB-6 xx wide WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide 4xx.74 WZ-GY DSB7-8 xx7 wide 0xx DSB7-8 xx7 wide WZ-ZI- Hole 9mm 79xx ry e foot Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated se Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated ap screw ead er ry M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated stor ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 DIB xx0. DBS-M M nut 8x8x2 DIB xx DBS-M6 M6 nut 8x8x3 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x WZ-HY x 6. DBS-M6 M6 nut 4x4x6 WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x6. WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x6. DBSQ-M8-2 M8 nut 2xx6. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M3 DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M4 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M4 PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M6 PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 Part DSN-M Spring nut M Number each DSN-M6 Spring nut M6 SHCSM6X6ZP 0. DSN-M8 Spring nut M8 SHCSM6XZP 0.2 DTN-M3 T slot nut M3 SHCSM8X2ZP 0.8 DTN-M4 T slot nut M4 SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 SHCSM8XZP 0. DTN-M4 T slot nut M4 BSHCSMX6ZP 0. DTN-M T slot nut M BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 BSHCSM8X6ZP 0.37 DTN-M T slot nut M BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 WM6X2SZP 0.02 DN-M M6 ong nut x8x WM6XSZP 0.03 DN-M6 M8 ong nut 0x0 WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4 WM8X22SZP 0.0 DSB-6 x FB 7. DSB00-8 0x0x3 FB 9. FB 9.8 DSB28-6 xx2 FB.0 DSB70-8 0x7x3 FB 9.8 FB 4.00 DSB2-6 2x GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide GJ kg mm Base, Mx00 high 6. DCB-6 xx wide SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide SC 00kg x32 Wheel.00 DCB3-8 xx3 wide SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide WZ-T WZ-XS DSB2-6 xx2 wide 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 4.0 Hole 2mm DSB-6 xx wide WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide 4xx.74 WZ-GY DSB7-8 xx7 wide 0xx DSB7-8 xx7 wide WZ-ZI- Hole 9mm Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide xx DSB7-8 xx7 wide 6.48 WZ-ZI- Hole 9mm 79xx Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide 3.77 Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated rail th rod ) Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 WZ-ZI-S 4xx 3.0 DSB3-8 xx3 wide.9 4xx.74 WZ-GY DSB7-8 xx7 wide 3.77 Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated rail ith rod p) Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 SC00 0kg 00x32 Wheel. DCB77-8 7x7x7 wide 7.0 SC2K kg 2x32 Wheel with lock 22. DSB-6 xx wide.37 SC2 kg 2x32 Wheel 9. DSB3-6 xx3 wide.82 WZ-T WZ-XS DSB2-6 xx2 wide.70 6xx39 (Hole 2mm) 2xx DSB-6 xx wide 2.34 Rod flange bracket 4.0 Hole 2mm DSB-6 xx wide 4.62 Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut Part Part DIB 2x2x0. DBS-M4 M4 nut 8x8x2 0.8 DIB xx0. DBS-M M nut 8x8x2 0.8 DIB xx DBS-M6 M6 nut 8x8x3 0.8 DJC- 9x8x - M 0.3 DBS-M4 M4 nut 0x0x 0.8 DJC-6 28x0x8 - M6 0.4 DBS-M M nut 0x0x 0.8 DJC-8 38x4x - M8 0.0 DBS-M6 M6 nut 0x0x 0.8 WZ-HY x 6. DBS-M6 M6 nut 4x4x6 0. WZ-HY 4x2. 7. DBS-M8 M8 nut 4x4x6 0. WZ-HY 0x 8. DBSQ-M6 M6 nut 0x2x 0. WZ-ZBS-M8 / 39x26 - M8 Female 4.0 DBSQ-M6-46 M6 nut 4x6x WZ-ZBS-M0 / 39x26 - Suit M6 bolt 4.0 DBSQ-M8-46 M8 nut 4x4x DBSQ-M8-2 M8 nut 2xx6. 0. DAJ-06 Precision cast zinc 9.00 DSN-M3 Spring nut M DAJ-08 Precision cast zinc 9.00 DSN-M4 Spring nut M DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.63 DSN-M4 Spring nut M PE- Slot cover - Polyethylene 2.63 DSN-M Spring nut M 0.70 PE- Slot cover - Polyethylene 2.7 DSN-M6 Spring nut M PE-0 0 Slot cover - Polyethylene 7.00 DSN-M4 Spring nut M4 0. Part DSN-M Spring nut M 0. Number each DSN-M6 Spring nut M6 0. SHCSM6X6ZP 0. DSN-M8 Spring nut M8 0. SHCSM6XZP 0.2 DTN-M3 T slot nut M SHCSM8X2ZP 0.8 DTN-M4 T slot nut M SHCSM8X6ZP 0.9 DTN-M3 T slot nut M3 0. SHCSM8XZP 0. DTN-M4 T slot nut M4 0. BSHCSMX6ZP 0. DTN-M T slot nut M 0. BSHCSM6X6ZP 0.26 DTN-M3 T slot nut M3 0. BSHCSM6XZP 0.29 DTN-M4 T slot nut M4 0. BSHCSM8X6ZP 0.37 DTN-M T slot nut M 0. BSHCSM8XZP 0.37 DTN-M6 T slot nut M6 0. WM6X2SZP 0.02 DN-M M6 ong nut x8x. WM6XSZP 0.03 DN-M6 M8 ong nut 0x0x6 2. WM8X6SZP 0.04 DN-M8 M8 ong nut 0x4x8 3. WM8X22SZP 0.0 DSB-6 x 3. FB 7. DSB00-8 0x0x3.0 FB 9. FB 9.8 DSB28-6 xx2 2. FB.0 DSB70-8 0x7x3. FB 9.8 FB 4.00 DSB2-6 2x.9 GJX-08 0kg mm Base, M8x high 7.2 DSB37-8 3x7 2. GJX-000 0kg mm Base, M0x00 high 8.2 GJX-200 0kg mm Base, M2x00 high.7 DCB2-6 2x2x8 wide. GJ kg mm Base, M6x00 high 4. DCB2-6 xx2 wide. GJ kg mm Base, Mx00 high 6. DCB-6 xx wide 3.0 SCK 00kg x32 Wheel with lock 9. DCB-6 xx wide 4.0 SC 00kg x32 Wheel.00 DCB3-8 xx3 wide 2.0 SC00K 0kg 00x32 Wheel - Offset.0 DCB7-8 xx7 wide 4.4 Flat washer M8 x 6 OD, zinc plated Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 Suit PS - M2 M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 6 long, zinc plated Suit PS - M2 Flat washer M6 x 2 OD, zinc plated Flat washer M6 x OD, zinc plated M6 x 6 long, zinc plated M6 x long, zinc plated M8 x 2 long, zinc plated M8 x 6 long, zinc plated M8 x long, zinc plated M8 x long, zinc plated M x 6 long, zinc plated ong Nut PROFIE ACCESSORIES More conveyor parts available on request Joint Block
6 WORK BENCHES & TROEYS MADE TO ORDER Optional backboard Solid 6mm MDF Melamine bench top Trolleys Strong solid frame Optional Shelf Adjustable Feet or optional Castors Custom Benches Custom benches Trolley Parts Industrial Whiteboard Work Bench Sizes Size ength Depth Height Small Medium arge 0 0 0,089 Note: Custom sizes available Work Station Electrical Height Adjustable (kg) Size ength Depth Height Small ,699 Medium ,764 arge ,998 Note: Dual actuator system Options for Work Benches Shelf Backboard Castors Note: Peg and louver panel extra Electric Height Adjustment Mitchell Industries & Solutions Solutions, Mitchell Industries & Automation are trading names of Gecam Industries Pty td ABN Porters Road, Kenthurst NSW 28 PO Box 38, Kenthurst NSW 28 Phone: , (02) Mobile: (Thomas Mitchell) Fax: leak@profauto.com.au (Australia & NZ) murray.lock@profauto.com.au (Victoria) Website:
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationMagnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationSizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
More informationDouble and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationStructural system XF. System information X45 X65 X65P X85 X85P XKP X180 X300 ELV CTL FST APX IDX. Contents. Features.
Structural system Contents System information...1 Beams...2 Connectors...2 System information Features Feet... Enclosure components... T-slot dimensions 7,2±0, PO CC X5 XS X65 X65P X85 X85P XH XK XKP X180
More informationBALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
More informationEnglish 1/2015. The Profi le System
English 1/2015 The Profi le System MayTec System Technology The key to success! Solutions with Innovative Profi le The Profi le System Curved Profi les The Clean-Room System The Telescopic System The Linear
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationSingle-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
More informationModular. Machine Guard System. Version 5.2. Product Catalogue. Assembly Technology
Product Catalogue Machine Guard System Version 5.2 Company Information Profession Devotion Keep Improving Company Information Planning Software Complete product info CAD library Quick & Easy configurator
More informationSeries 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned
> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»
More informationOne-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
More informationSTANDARDISED MOUNTINGS
STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction
More informationStructural system XF. System information X45 XLP X85 X85P XKP FST XMY XLX XMX GRX CSX ELV CTL APX IDX. Features. T-slot dimensions
Structural system System information PO X5 XS XL XLP X85 X85P XH XK XKP XB GR CS XT Features XC XD FST XMY The FlexLink system includes two basic beam types: support beams (BM) in cross-sectional dimensions
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationSTANDARDISED MOUNTINGS
for PS / PLS / PC cylinders conforming ISO 15552-FNOR-DIN (PS-PLS) ISO 21287 (PC) standards Series 434 MOUNTINGS CONFORMING WITH ISO 21287 - ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationAccessory. 314 Threaded flanges, welded socket, mounting accessories. 322 plics housing overview
Accessory 314 Threaded flanges, welded socket, mounting accessories 322 plics housing overview 313 Threaded flanges stainless steel 316L Flange F Dimensions according to Form C, DIN2501... K Dimensions
More informationTable of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
More informationcompact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
More informationSemi-rotary drives DRQ
Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree
More informationLong Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationVERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
More informationmechanics Features Technical specification Ordering information Dimensioned drawings Aluminium profiles made by isel
Panel profiles PP profiles For fast and easy erection of frames, benches and racks luminium, naturally anodised easy, very strong under load Top edge particularly suitable as a load-bearing cladding, also
More informationGoTo Europe Focused Delivery Program. Product overview assembly technology
GoTo Europe Focused Delivery Program Product overview assembly technology 2 GoTo Europe Products you need, delivered when you need them In today s global competition every day counts. Fast response times
More informationAt Dyno we make the world of business go round. Up and down. And side to side.
Roller Catalogue 2017 SECTION At Dyno we make the world of business go round. Up and down. And side to side. Our conveyors make moving meat, veges, fruit, packages, gravel, and even luge sleds simple and
More informationOverview. Bosch Rexroth Corp /11 Aluminum Framing. Linear Motion and Assembly Technologies. Section 8: Air Supply Elements
91 500 201 0/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Overview Air supply elements convert certain profiles into compressed air bars. Convenient and flexible pneumatic connections
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More informationP1X Series. Compact Rodless Air Cylinders Contents
Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationVALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67
VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control
More informationHIGH PRESSURE - pumps
Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group
More informationCPLab / CP Factory. Application module magazine. Data sheets
CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design
More informationTwin-piston semi-rotary drives DRRD
Twin-piston semi-rotary drives DRRD Twin-piston semi-rotary drives DRRD Key features At a glance Rack and pinion principle Very high accuracy in the end positions Very high bearing load capacity Very good
More informationStandard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance Design Easy to clean Easy to mount Flexible DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1
More informationABS DWV FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
ABS DWV FITTINGS FOR PLUMBING AND MECANICAL APPLICATIONS Job Name Contractor Job Location Wholesaler Engineer Streamline Rep Product Description: Streamline ABS DWV ittings for use in applications including
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationTable 1d - FSA for All Returns, Females Tax Year
PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370
More informationISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) SER SES Series 435 Type C-AS C-AS/DM GENERAL Detection
More informationSeries 2, 3, 4 Steel Cable Ladder Steel Cable Ladder, Series 2, 3, 4 & 5
Cable Ladder with Slotted Rung (shown with alternating slot orientation) Cable Ladder with Slotted Rung (shown with continuous slot down - also available with continuous slot up) HDS-1 Steel Cable Ladder,
More informationOSPE..BHD Belt-Driven Actuators
OSPE..BHD Belt-Driven Actuators Actuators for High-Speed, Long Travel, Heavy Duty Applications The OSPE..BHD is the highest capacity belt-driven actuator in the OSPE family. The integrated ball bearing
More informationProfiles and Mounting options. NEW Additional. HepcoMotion. MCS aluminium frame and machine construction system including MFS fencing system
NEW Additional Profiles and Mounting options HepcoMotion MCS aluminium frame and machine construction system including MFS fencing system MCS Machine Construction System and MFS Machine Fencing System
More informationHEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
More informationFunction: Used to connect profiles at adjustable angles. Features: 1. Adjustable angles. Item Description For Screw Weight (g) Colour Finish Material
4.56 Swivel Fastener (SWF): Function: Used to connect profiles at adjustable angles. 1. Adjustable angles. SWF 1.25.0132.0 8 M6x S3.60 M6 S3.61 M6x S3.60 Item Description For Screw Weight (g) Colour Finish
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More information4 01 ta l o g u e 2 Ca P R i c e L I S T
Catalogue 2014 The Complete Product Range The compression fittings: Our Gebo Quick the universal compression fittings are available for steel pipes of 1/2" to 2" diameter, for black steel pipes of 20 mm
More informationISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) GENERAL Detection Equipped or not for magnetic position
More informationFerax newsletter
Ferax newsletter 2010-07 1 COMPRESSED AIR Quick couplings Quick couplings with hose connection Quick couplings with male thread Quick couplings with female thread Insert nipple with hose connection Insert
More informationSection 13 Bosch EcoSlide Linear Sliding Carriages and Bearings
coslide Linear Sliding arriages and earings 1 Section osch coslide Linear Sliding arriages and earings The new osch coslides, along with the new slider bearings and the profile slider, provide an inexpensive
More informationConveyor system XH Contents System information Chain width 103 mm Technical characteristics Features Examples of application areas
Conveyor system Contents System information...215 Chains...216 Chain accessories...217 Beams...217 Beam accessories...218 Slide rails...219 Slide rails, hardened steel...220 Drive and idler units introduction...221
More informationHinge cylinders DW Key features
Key features At a glance Hinge cylinder for clamping components during the welding process Easy assembly thanks to swivel bearing on the bearing cap Integrated flow control Integrated end-position cushioning
More informationDescription 315 mm width thermoplastic belt with aluminium frame conveyor system
AP DF2 DR2 DT2 DX2 DL2 DM3 DS2 MA MB MG MF2 MR2 MT2 MX2 ML2 MM3 MS2 TR Conveyor System DT2 Description 315 mm width thermoplastic belt with aluminium frame conveyor system Examples of application industries
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationLarge Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
More informationSection 10 Conveyors and Transport Components
1 Section Conveyors and Transport Components Roller elements, roller profiles, support rollers, and other components are perfect to set up lean manufacturing work cells. These non-powered roller elements
More informationISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
More informationMicrobore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
More informationISO Cylinders - P1D-B
Flange MF1/MF2 Intended for fixed mounting of cylinder. Flange can be fitted to front or rear end cover of cylinder. Materials Flange: Surface-treated steel Mounting screws acc. to DIN 6912: Zinc-plated
More informationPURAKAL SERIES 100 TABLE OF CONTENTS
TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................
More informationBALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationElectric actuation for industrial automation
Electric actuation for industrial automation C_ELECTRICS CATALOGUE Technology and innovation for industrial applications Every application in the industrial automation sector has different and very specific
More informationLOCKS Cam Locks P Push Locks P Plug Locks P Digital Locks P. 095
OCKS -1 Cam ocks P. 092-094 -2 Digital ocks P. 095-3 Push ocks P. 096-097 -4 Aluminium Frame & Drawer ocks P. 098-101 -5 Plug ocks P. 102-103 -6 Glass ocks P. 104-109 -1 Cam ocks Cam ock 16 * mm drilling
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationmechanics LES functional overview LES 4 LES 6 LES 5
LES functional overview LES 4 with spindle drive Overview 2-54 2-56 LES 6 2-58 with spindle drive LES 5 2-60 with spindle drive Calculations 2-62 Combination examples Motor modules Clutch housing Motor
More informationModular plastic belt conveyor WK
Modular plastic belt conveyor Contents System information...405 Belts introduction...406 Belts...407 Conveyor sections...408 Conveyor frame components introduction...409 Conveyor frame components...410
More information2016 年第二季度新品 (Spring) New Products 2016 MCS
16 年第二季度新品 (Spring) New Products 16 MCS Aluminum Profile 1.11..00 x 4 slots x 4 x40 6 slots x40 6 x60 8 slots x60 8 x80 10 slots x80 10 40x40 8 slots 40x40 8 6mm x 4 slots x 4 x40 6 slots x40 6 x60 8 slots
More informationBrakes for Light Duty Casters
Brakes for Light Duty Casters Cam Brake Available on 01. Step down to engage and release. Specify NB01. Face Contact Brake Available on 02 & 04. Step down to engage and release. Specify F. Face Contact
More informationManufacturers of Agricultural Machinery. Hi-Spec Vacuum Tanker
Manufacturers of Agricultural Machinery Hi-Spec Vacuum Tanker Introduction... 2 Contents... 3 Layout of Vacuum Tankers... 4 Change Over Systems... 5 Pumps... 6 Jurop PN 45/58/84 M... 7 Jurop PN106 M...
More informationStandard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
More informationSeries 1 Steel - Straight Sections
- Straight Sections H-1 -Line series able Systems - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding system in this catalog is designed
More informationCYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER HEAD 1 4JY-11111-00-00 HEAD, CYLINDER 1 (4JY-11111-01-00).......... 1 2 90116-08394-00 BOLT, STUD.............. 5 3 90176-08026-00 NUT, CROWN............. 5 4 90201-08087-00 WASHER, PLATE...........
More informationHW-B50H HW-W50L HW-W50LU
Product Content 1 Coverage and Terminology... 4 1.1 Design Standards... 4 1.2 Load Criteria... 5 1.3 Definition of Terms... 6 1.3.1 Flood Barrier... 6 1.3.2 Flood Protection Walls... 7 1.3.3 Flood Protection
More informationmechanics LES functional overview LES 4 LES 6 LES 5
LES functional overview LES 4 Overview B-36 B-38 with spindle drive LES 6 B-40 with spindle drive LES 5 B-42 with spindle drive Combination examples Motor modules Clutch housing Motor leads Installation
More information10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
More informationDynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
More informationLSPXMV FCR Atmospheres containing explosive dust FCR asynchronous brake motors. General information
General information GENERAL USE : U.G. Enclosed three-phase brake asynchronous motors, LSPXMV series with failsafe brake, according to IEC 6003, 60072, EN 50281. Single speed : 0.25 to 11, frame size from
More informationStandard cylinders DNC-C180, to ISO 15552
Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and
More informationPIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
More informationSHELVING SYSTEM Shelving system and Mini-Racking
SHELVING SYSTEM Shelving system and Mini-Racking Shelving system and Mini-Racking Improve your professionnal image and credibility; Heavy-duty posts work for both shelving and mini-racking and permit shelves
More informationAXLE BEAM REPLACEMENT SERVICE KITS
When sending out replacement axle beams, you must be sure to send the correct service kit for the beam size. Use the chart below to determine which service kit goes with which beam size. Illustrations
More informationJdB cassette. Version 1.03 Sun Protection AVZ 3J.1
Version 1.0 Sun Protection AVZ J.1 J.2 Sun Protection AVZ Version 1.0 4211 424-000 Alu wall bracket JdB 95 mm Mill finish 4211 424-006 Idem RAL 9010 pure white 4211 424-755 Idem (* = Textured) RAL 7016
More informationLoadMaster 80 rodless actuator
LoadMaster 80 rodless actuator LoadMaster 80 Rodless actuator Two versions, for horizontal or vertical operation Rigid self supporting aluminium profi le Quiet operation for indoor domestic or medical
More informationMore Energy Solutions
More Energy Solutions Try us out today! Flashlight Rechargeable Flashlight Spotlight antern Rechargeable antern ork ight Rechargeable ork ight Safety ight Home ighting Professional ighting CONTENT Flashlight
More informationPerfo. Kits Perfo Accessories (without perforated panels) Kits Perfo Accessories (with perforated panels)
482 Technical Information.......................... 484 48 Panels............................... 486 487 for rated Panels........... 488 0 Kits (without perforated panels). 02 07 Kits (with perforated
More informationCompact cylinders ADVUL
Piston rod secured against rotation by means of guide rods and yoke plate Profile slots for proximity sensors Extensive range of accessories 2016/03 Subject to change Internet: www.festo.com/catalog/...
More informationModular. Products Index. Aluminum Profile P P P P P Fastening Elements P P P P P P.
Products Index 1 Aluminum Profile P. 1-06 P. 1-07 P. 1-08 P. 1-11 P. 1-17 P. 1-21 P. 1-22 P. 1-23 P. 1-24 2 Fastening Elements P. 2-02 P. 2-03 P. 2-04 P. 2-0 P. 2-06 P. 2-07 P. 2-08 Products Index 3 Connecting
More information