P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard > Wide range of cylinder variants > Polyurethane seals provide high performance and long life Technical features Medium: Compressed air, filtered, lubricated or non-lubricated : Based on ISO 5552 (length, mounting pitch and thread dimensions according to ISO 5552. Some outside dimensions different from ISO 5552) Operation: Double acting, magnetic or non magnetic piston, adjustable cushioning Operating pressure:... 0 bar (... 5 psi) Port size: G/8, G/, G3/8 Cylinder diameters: 32, 0, 50, 63, 80, 00 mm strokes: See below Non-standard strokes: vailable (0... 2000 mm) Operating temperature: -20... +80 C max. (-... +76 F) ir supply must be dry enough to avoid ice formation at temperatures below +2 C. (+35 F) Materials: Profile barrel: anodised aluminium End covers: pressure diecast anodised aluminium Piston rod: stainless steel see page 2 Piston rod seals: PU Piston seals: PU O-rings: NB Technical data Cylinder (mm) 32 0 50 63 80 00 Port size G/8 G/8 G/8 G/ G/ G3/8 Piston rod (mm) 2 6 20 20 25 25 Piston rod thread M0 x,25 M2 x,25 M6 x,5 M6 x,5 M20 x,5 M20 x,5 Cushion length (mm) 9 9 26 Theoretical thrusts at 6 bar outstroke (N) 82 75 78 870 306 70 Theoretical thrusts at 6 bar instroke (N) 633 990 680 2722 6 ir consumption at 6 bar outstroke (l/cm) 0,056 0,088 0,37 0,28 0,35 0,55 ir consumption at 6 bar instroke (l/cm) 0,05 0,076 0,7 0,98 0,32 0,5 strokes Cylinder (mm) Stroke length (mm) 25 50 80 00 25 60 200 250 320 00 500 32 0 50 63 80 00 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7 en.5.230.0
P/822000/M, P/822000 Smoothline cylinder Cylinder variants - non-magnetic piston Symbol T S C D V E Non-magnetic piston Description P../822000 cylinder 6 TP../822000 High temperature version, 50 C max P../822000/W Cylinder with special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand,hoar-frost or ice) P../822000/IU Cylinder with extended piston rod 6 P../822000/W5 Cylinder with extended piston rod and special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand, hoar-frost or ice) P../822000/G Cylinder with piston rod bellows 7 Dimensions Page P../822000/J Cylinder with double ended piston rod 7 TP../822000/J High temperature version, 50 C max P../822000/W3 Cylinder with double ended piston rod and special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand, hoar-frost or ice) P../822000/IT Four position cylinders 8 P../822000/L2 Cylinder with locking unit (passive) Spring force on removal of the signal to the unit. Operating pressure for locking unit:... 0 bar 8 Cylinder variants - magnetic piston Symbol T S C D V E magnetic piston Description P../822000/M cylinder 6 TP../822000/M High temperature version, 50 C max P../822000/W2 Cylinder with special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand,hoar-frost or ice) P../822000/MU Cylinder with extended piston rod 6 P../822000/W6 Cylinder with extended piston rod and special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand, hoar-frost or ice) Dimensions Page P../822000/MG Cylinder with piston rod bellows 7 P../822000/JM Cylinder with double ended piston rod 7 TP../822000/JM High temperature version, 50 C max P../822000/W Cylinder with double ended piston rod and special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand, hoar-frost or ice) P../822000/MT Four position cylinders 8 P../822000/L Cylinder with locking unit (passive) Spring force on removal of the signal to the unit. Operating pressure for locking unit:... 0 bar 8 For the cylinder models style, S, C, D, V and E see options selector en.5.230.02 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7
P/822000/M, P/822000 Smoothline cylinder Option selector Special version High temperature; 50 C max Piston rod material Stainless steel (martensitic); wiper seal Stainless steel (austenitic); wiper seal Hard chromium plated; wiper seal Stainless steel (austenitic); hard chromium plated; wiper seal Stainless steel (austenitic); Smooth wiper seal Stainless steel (austenitic); hard chromium plated; Smooth wiper seal Cylinder (mm) 032, 00, 050, 063, 080, 00 Substitute T Substitute S C D V E Substitute Note: If option is not required, disregard option position within part number, eg. P/822032/00. For combinations of cylinder variants consult our Technical Service. Please note that heat resistant seals are not available for all variants. This options selector explains only the cylinder variants. dditional variants/options can not be derived from. P /822 / / Strokes (mm) 2000 max. Variants (magnetic piston) Double ended piston rod Four position Special wiper seal Double ended piston rod; special wiper seal Piston rod bellow Extended piston rod Special wiper seal, extended piston rod P**/822***/MU/****/*** /W6/ Piston rod locking unit Variants (non-magnetic piston) Double ended piston rod Four position Special wiper seal Double ended piston rod, special wiper seal Piston rod bellow Extended piston rod Special wiper seal, extended piston rod P**/822***/IU/****/*** /W5/ Substitute M JM MT W2 W MG MU W6 Extension (mm) L Substitute None J IT W W3 G IU W5 Extension (mm) Piston rod locking unit L2 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en.5.230.03
P/822000/M, P/822000 Smoothline cylinder Mountings 2 3 6 5 25 7 8 2 9 8 0 7 5 6 Position Style Corrosion protected B, G Clear anodised aluminium Clear anodised aluminium. Screws: 2 2 C Galvanized steel (ø 32... 63 mm) Painted steel (ø 80 & 00 mm) 3 Diecast aluminium Black corrosion protected diecast aluminium. Certified for the food industry. Screws: 2 U Galvanized aluminium Inner ring: steel Outer ring: brass Black corrosion protected diecast aluminium Certified for the food industry Inner ring: stainless Steel (austenitic) Outer ring: nickel plated hardened steel 5 D Diecast aluminium Bolt: galvanized steel (martensitic) Circlip: galvanized steel Black corrosion protected diecast aluminium Certified for the food industry Bolt: X 0 Cr Ni S 8 9 (.305, ISI 303) Circlip: Stainless steel (martensitic). Screws: 2 6 SW Diecast aluminium Black corrosion protected diecast aluminium Certified for the food industry 7 US Galvanized aluminium. Inner ring: steel Outer ring: brass 8 D2 Painted cast iron. Bolt: stainless steel (martensitic) Circlip: galvanized steel 9 FH Cast iron 0 Galvanized steel 2 S Clear anodised aluminium Bearing: brass 5 F Galvanized steel Bolt: galvanized steel Circlip: Galvanized steel Nickel plated steel Circlip: X 0 Cr Ni S 8 9 (.305, ISI 303) Bolt: X 0 Cr Ni S 8 9 (.305, ISI 303) 6 SS Painted cast iron 7 UF Galvanized steel. Inner ring: steel Outer ring: brass Nickel plated steel. Inner ring: stainless steel (austenitic) Outer ring: nickel plated hardened steel. 8 K Galvanized steel en.5.230.0 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7
P/822000/M, P/822000 Smoothline cylinder Mountings K B, G C D D2 F FH Cyl. 0 Page 9 8 Page 9 Page 9 2 Page 9 5 Page 0 8 Page 0 5 Page 0 9 Page 0 32 QM/8032/35 QM/8025/38 Q/8032/22 Q/8032/2 Q/8032/23 Q/8032/2 QM/8025/25 Q/8032/3 0 QM/8032/35 QM/800/38 Q/800/22 Q/800/2 Q/800/23 Q/800/2 QM/800/25 Q/800/3 50 QM/8050/35 QM/8050/38 Q/8050/22 Q/8050/2 Q/8050/23 Q/8050/2 QM/8050/25 Q/8050/3 63 QM/8050/35 QM/8050/38 Q/8063/22 Q/8063/2 Q/8063/23 Q/8063/2 QM/8050/25 Q/8063/3 80 QM/8080/35 QM/8080/38 Q/8080/22 Q/8080/2 Q/8080/23 Q/8080/2 QM/8080/25 Q/8080/3 00 QM/8080/35 QM/8080/38 Q/800/22 Q/800/2 Q/800/23 Q/800/2 QM/8080/25 Q/800/3 Corrosion protected 32 PVQ/8032/22 PVQ/8032/23 PVQM/8025/25 0 PVQ/800/22 PVQ/800/23 PVQM/800/25 50 PVQ/8050/22 PVQ/8050/23 PVQM/8050/25 63 PVQ/8063/22 PVQ/8063/23 PVQM/8050/25 80 PVQ/8080/22 PVQ/8080/23 PVQM/8080/25 00 PVQ/800/22 PVQ/800/23 PVQM/8080/25 S SS SW UF U US ssembly kit for four-position cylinder Cyl. 3 Page 2 Page 6 Page 2 6 Page 7 Page Page 2 7 Page 2 Page 2 32 Q/8032/27 Q/8032/ M/P993 M/P993 QM/8025/32 Q/8032/33 M/P030 QM/92032/55 0 Q/800/27 Q/800/ M/P9932 M/P99 QM/800/32 Q/800/33 M/P03 QM/9200/55 50 Q/8050/27 Q/800/ M/P9933 M/P995 QM/8050/32 Q/8050/33 M/P032 QM/92050/55 63 Q/8063/27 Q/8063/ M/P993 M/P996 QM/8050/32 Q/8063/33 M/P033 QM/92063/55 80 Q/8080/27 Q/8063/ M/P9935 M/P997 QM/8080/32 Q/8080/33 M/P03 QM/92080/55 00 Q/800/27 Q/800/ M/P9936 M/P998 QM/8080/32 Q/800/33 M/P035 QM/9200/55 Corrosion protected 32 PVQ/8032/27 M/P059 PVQM/8025/32 PVQ/8032/33 0 PVQ/800/27 M/P060 PVQM/800/32 PVQ/800/33 50 PVQ/8050/27 M/P06 PVQM/8050/32 PVQ/8050/33 63 PVQ/8063/27 M/P062 PVQM/8050/32 PVQ/8063/33 80 PVQ/8080/27 M/P063 PVQM/8080/32 PVQ/8080/33 00 PVQ/800/27 M/P06 PVQM/8080/32 PVQ/800/33 ccessories Magnetically operated switches M/50 *) Switch mounting bracket *2) Service kit Service kit 25 Pages 3 & *) Switches can be mounted flush with the profile! Page 2 QM/33/822/22 *2) For switches (ø 8 mm) QM/33, QM/3 or QM/3 only! Useable for all cylinder ø. Cyl. 32 PQ/822032/00 0 PQ/82200/00 50 PQ/822050/00 63 PQ/822063/00 80 PQ/822080/00 00 PQ/82200/00 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en.5.230.05
P/822000/M, P/822000 Smoothline cylinder Dimensions Dimensions in mm Projection/First angle L2 KW G5 ø 32... 63 E ø B e MM h 9 KK T ø B e E2 T E KV SW BG G BH 5 EE 8 PL ø 80 & 00 PL2 E E2 M VD L2 WH G PL 9 L8 + # T L9 PL V G - - ø 32... 63 ø 80 & 00 T BG BG 7 # Stroke BH T Cushion adjustment front end cover 7 ir supply, cylinder instroke 8 ir supply, cylinder outstroke 9 lternative air supply, cylinder instroke Cushion adjustment rear end cover 5 M/50 switches can be mounted flush with the profile ttention: eed switches can only be used for 0... 00 mm Cyl M Be Be BG BH E E2 E EE G G G5 KK KW L2 L8 L9 L2 MMh9 32 22 30 30 6 6 53 3 32 G/8 7 20,5 M0x,25 5 20 9,5 2 0 2 35 35 6 6 60 3,5 3 G/8 53 22,5 M2x,25 6 2 05 6,5 6 50 32 0 0 6 8 7,5 0 39 G/8 55,5 2,5 M6x,5 8 28 06 5 6,5 20 63 32 5 5 6 8 82 6 5,5 G/ 9 58 29,5 M6x,5 8 28 2 5 6,5 20 80 0 5 5 7 6 99 5 57 G/ 9 63 3 M20x,5 0 35 28-7,5 25 00 0 55 55 7 6 9 65 65 G3/8 2,5 67 36,5 M20x,5 0 38 38-0 25 Cyl PL PL PL2 T V VD WH KV SW at 0 mm per 25 mm ; non-magnetic piston ; magnetic piston 32 7 0,5 32,5 M 6 3 6 26 7 0 0,56 kg 0,07 kg P/822032/* P/822032/M/* 0 7 0,5 38 M 6 3,5 6 30 9 3 0,93 kg 0, kg P/82200/* P/82200/M/* 50 7 2,5 6,5 M 8 3,5 6 37 2 7,8 kg 0,8 kg P/822050/* P/822050/M/* 63 9,5,5 6 56,5 M 8 6 37 2 7 2,32 kg 0,9 kg P/822063/* P/822063/M/* 80 9,5 6 72 M 0 6 6 30 22,02 kg 0,29 kg P/822080/* P/822080/M/* 00 2 6,5 8,5 89 M 0 6 5 30 22 6,2 kg 0,35 kg P/82200/* P/8220/M/* * Please insert standard stroke length en.5.230.06 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7
P/822000/M, P/822000 Smoothline cylinder Cylinder variants P/822000/J, P/822000/JM Cylinder double ended piston rod Dimensions in mm Projection/First angle ø 32... 63 ø 80 & 00 L8 + # ZM + 2 x # Cyl. L8 ZM Non-magnetic piston Magnetic piston 32 9 6 P/822032/J/* P/822032/JM/* 0 05 65 P/82200/J/* P/82200/JM/* 50 06 80 P/822050/J/* P/822050/JM/* 63 2 95 P/822063/J/* P/822063/JM/* 80 28 220 P/822080/J/* P/822080/JM/* 00 38 20 P/82200/J/* P/82200/JM/* # Stroke Two threads can t be used for mountings * stroke length P/822000/G, P/822000/MG Cylinder with piston rod bellow B ø Cyl. Max. stroke per bellow Piston rod extention B for first bellow for further bellows Non-magnetic piston Magnetic piston 32 0 60 30 25 P/822032/G/* P/822032/MG/* 0 63 5 50 32 P/82200/G/* P/82200/MG/* 50 63 5 0 32 P/822050/G/* P/822050/MG/* 63 63 5 0 32 P/822063/G/* P/822063/MG/* 80 80 250 50 5 P/822080/G/* P/822080/MG/* 00 80 250 50 5 P/82200/G/* P/82200/MG/* * stroke length 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en.5.230.07
P/822000/M, P/822000 Smoothline cylinder P/822000/IT, P/822000/MT Four position cylinder L8 + # L L8 + #2 L0 + # + #2 Cyl. L8 L0 L Non-magnetic piston Magnetic piston 32 9 252,5 2,5 P/822032/IT/*/** P/822032/MT/*/** 0 05 282,5 2,5 P/82200/IT/*/** P/82200/MT/*/** 50 06 30 5 P/822050/IT/*/** P/822050/MT/*/** 63 2 33 5 P/822063/IT/*/** P/822063/MT/*/** 80 28 368 20 P/822080/IT/*/** P/822080/MT/*/** 00 38 398 20 P/82200/IT/*/** P/82200/MT/*/** * Please insert standard stroke length ** Please insert standard stroke 2 length # Stroke #2 Stroke 2 ssembly kit P/822000/L2, P/822000/L Cylinder with locking unit (passive) B L 8 + # J EE N ø B e E T M VD D E K WH F H G L E # Stroke Cyl B D E F G H J K L M N B e E E 32 32 2 8 0,2 8 25 M 5 6 59 8 30 8 50 0 35,5 2 0 6,5 55 2 M 5 2 6,5 0 35 56 58 50 9 6 5 5,5 70 30 M 6 2 75 2 0 68 70 63 9 5 5 55 7,5 70 38 M 8 32 86 2 5 82 85 80 62 6 6 70 0 90 53 M 8 9 6 5 00 05 00 65 8 6 70 0 92 8 M 8 60 9 6 55 20 30 Cyl EE L 8 T VD WH Locking force ; non-magnetic piston ; non-magnetic piston 32 M 5 9 32,5 M 6 0 6 600 N P/822032/L2/* P/822032/L/* 0 G /8 05 38 M 6 0 8 000 N P/82200/L2/* P/82200/L/* 50 G /8 06 6,5 M 8 2 22 500 N P/822050/L2/* P/822050/L/* 63 G /8 2 56,5 M 8 2 20 2200 N P/822063/L2/* P/822063/L/* 80 G /8 28 72 M 0 20 33 5000 N P/822080/L2/* P/822080/L/* 00 G /8 38 89 M 0 23 38 5000 N P/82200/L2/* P/82200/L/* * Please insert standard stroke length en.5.230.08 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7
P/822000/M, P/822000 Smoothline cylinder Mountings Front or rear stud mounting Conforms to ISO 5552, type MX Piston rod swivel K Dimensions in mm Projection/First angle BB DD TG 3 2 TG KK KK BB DD TG kg () 32/0 7 M6 32,5/38 0,02 QM/8032/35 50/63 23 M8 6,5/56,5 0,05 QM/8050/35 80/00 28 M0 72/89 0,08 QM/8080/35 B F L2 L KK B F L L2 kg (K) 2 3 32 M0x,25 5 26 73 20 9 2 7 30 0,20 QM/8025/38 0 M2x,25 6 26 77 2 9 2 9 30 0,20 QM/800/38 50/63 M6x,5 8 3 06 32 30 9 2 2 0,65 QM/8050/38 80/00 M20x,5 0 2 22 0 30 9 30 2 0,72 QM/8080/38 Front flange B, G Conforms to ISO 5552, type MF and MF2 Foot mounting C Conforms to ISO 5552, type MS MF UF TF FB E T H U O ø B T E E FB MF TF UF kg (B, G) 32 50 7 0 32 6 80 0,25 Q/8032/22 0 55 9 0 36 72 90 0,35 Q/800/22 50 65 9 2 5 90 0 0,70 Q/8050/22 63 75 9 2 50 00 25 0,80 Q/8063/22 80 00 2 6 63 26 5,35 Q/8080/22 00 20 6 75 50 86 2,20 Q/800/22 Corrosion protected version 32 50 7 0 32 6 80 0,25 PVQ/8032/22 0 55 9 0 36 72 90 0,35 PVQ/800/22 50 65 9 2 5 90 0 0,7 PVQ/8050/22 63 75 9 2 50 00 25 0,8 PVQ/8063/22 80 00 2 6 63 26 5,35 PVQ/8080/22 00 20 6 75 50 86 2,2 PVQ/800/22 B H O T U E T kg (C) 32 7 32 8 2 8 32 0,5 Q/8032/2 0 0 36 9 28 53 36 0,8 Q/800/2 50 0 5 0 5 32 6 5 0,30 Q/8050/2 63 0 50 2 5 32 7 50 0,39 Q/8063/2 80 2 63 9 5 98 63 0,80 Q/8080/2 00 7 9 5 5 75 0,95 Q/800/2 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en.5.230.09
P/822000/M, P/822000 Smoothline cylinder ear clevis D Conforms to ISO 5552, type MP2 LH ear clevis D2 Conforms to ISO 5552, type B6 Dimensions in mm Projection/First angle UB FL CP CB H L CG H FM S EK e 8 B3 JK h 9 M CB H EK e8 FL L LH M UB kg (D) 32 26 0 22 3 52 9 5 0, Q/8032/23 0 28 2 25 6 60 2 52 0,6 Q/800/23 50 32 2 27 7 68 2 60 0,22 Q/8050/23 63 0 6 32 22 79 5 70 0,3 Q/8063/23 80 50 6 36 22 99 5 90 0,5 Q/8080/23 00 60 20 27 9 20 0 0,90 Q/800/23 Corrosion protected version 32 26 0 22 3 52 9 5 0, PVQ/8032/23 0 28 2 25 6 60 2 52 0,6 PVQ/800/23 50 32 2 27 7 68 2 60 0,22 PVQ/8050/23 63 0 6 32 22 79 5 70 0,3 PVQ/8063/23 80 50 6 36 22 99 5 90 0,5 PVQ/8080/23 00 60 20 27 9 20 0 0,9 PVQ/800/23 B H B2 B3 EK h9 FL 2 kg (D2) 32 3 3,3 0 22 7 0,20 Q/8032/2 0 6 0,3 2 25 2 20 0,23 Q/800/2 50 2 5,3 6 27,5 22 0,36 Q/8050/2 63 2 5,3 6 32 8 25 0,55 Q/8063/2 80 25 65,3 20 36 22 30 0,90 Q/8080/2 00 25 75,3 20 22 32,5 Q/800/2 Piston rod clevis F Conforms to DIN ISO 80 Front or rear detachable trunnion FH Conforms to VDM 2562 part 2, type MT 5/6 LE CE K CL CM CL KK ø CK h L UW TD e 9 E KK CE CKh CL CM E LE K kg (F) 32 M0x,25 0 0 20 0 6 20 28 0,09 QM/8025/25 0 M2x,25 8 2 2 2 9 2 32 0,3 QM/800/25 50/63 M6x,5 6 6 32 6 25 32,5 0,33 QM/8050/25 80/00 M20x,5 80 20 0 20 32 0 50 0,67 QM/8080/25 Corrosion protected version 32 M0x,25 0 0 20 0 6 20 28 0,09 PVQM/8032/25 0 M2x,25 8 2 2 2 9 2 32 0,3 PVQM/800/25 50/63 M6x,5 6 6 32 6 25 32,5 0,33 PVQM/8050/25 80/00 M20x,5 80 20 0 20 32 0 50 0,67 PVQM/8080/25 TL D H TM h D h L TD e9 TL TM h UW kg (FH) 32 30 6 2 2 50 5 0,20 Q/8032/3 0 35 20,6 6 6 63 55 0,38 Q/800/3 50 0 2,6 6 6 75 65 0,60 Q/8050/3 63 5 2,6 20 20 90 75,0 Q/8063/3 80 5 28,6 20 20 0 00,90 Q/8080/3 00 55 38 2 25 25 32 20 3,50 Q/800/3 en.5.230.0 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7
P/822000/M, P/822000 Smoothline cylinder ear eye Conforms to ISO 5552, type MP Trunnion support S Conforms to ISO 5552, type T FL ø D 3 EW L CD H 9 T H 2 H H7 ø D F x 5 M ø D 2 B C B 2 CD H9 EW FL L M kg () 32 0 25,8 22 3 9 0,09 Q/8032/27 0 2 27,8 25 6 2 0, Q/800/27 50 2 3,7 27 7 2 0,7 Q/8050/27 63 6 39,7 32 22 5 0,2 Q/8063/27 80 6 9,7 36 22 5 0,37 Q/8080/27 00 20 59,7 27 20 0,59 Q/800/27 Corrosion protected version 32 0 25,8 22 3 9 0,09 PVQ/8032/27 0 2 27,8 25 6 2 0, PVQ/800/27 50 2 3,7 27 7 2 0,7 PVQ/8050/27 63 6 39,7 32 22 5 0,2 PVQ/8063/27 80 6 9,7 36 22 5 0,37 PVQ/8080/27 00 20 59,7 27 20 0,59 PVQ/800/27 B 2 C DH7 D2 D3 F x 5 H 2 T kg (S) 32 32 6 8 0,5 2 6,6 30 5 6,8 0,0 Q/8032/ 0/50 36 55 2 2 6 9 5,6 36 8 9 0, Q/800/ 63/80 2 65 23 3 20 8,6 0 20 0,8 Q/8063/ 00 50 75 28,5 6 25 20 2 50 25 3 0,3 Q/800/ Universal piston rod eye UF Conforms to DIN ISO 839 Wide hinge SW Conforms to ISO 5552, type B7 CN H 7 CE EN h2 EM ø EB L 2 ø CK H 9 B GL KK Z Z PH BT E LE EP ø HB TE U UL Thread KK X CE CN H7 EN -0, E LE Z kg (UF) 32 M0x,25 20 3 0 5 3 0,09 QM/8025/32 0 M2x,25 22 50 2 6 6 7 3 0,3 QM/800/32 50/63 M6x,5 28 6 6 2 2 22 5 0,33 QM/8050/32 80/00 M20x,5 33 77 20 25 25 26 5 0,67 QM/8080/32 Corrosion protected version 32 M0x,25 20 3 0 5 3 0,09 PVQM/8025/32 0 M2x,25 22 50 2 6 6 7 3 0,3 PVQM/800/32 50/63 M6x,5 28 6 6 2 2 22 5 0,33 PVQM/8050/32 80/00 M20x,5 33 77 20 25 25 26 5 0, PVQM/8080/32 C CKH9 D H2 EM G G2 G3 K K2 L S kg (SW) 32 32 0 7 25,5 2 8 3 38 50,6 0 6,6 0,05 M/P993 0 36 2 9 27,5 2 22 35 5,6 6,6 0,07 M/P99 50 5 2 5 3,5 33 30 5 50 65,6 3 9 0, M/P995 63 50 6 5 2 39,5 37 35 50 52 67,6 5 9 0,8 M/P996 80 63 6 8 9,5 7 0 60 66 8 2,5 5 0,28 M/P997 00 7 20 8 5 59,5 55 50 70 76 9 2,5 9 0,2 M/P998 Corrosion protected version 32 32 0 8 26,5 2 8 3 38 5,6 0 6,6 0,05 M/P059 0 36 2 0 28,5 2 22 35 5,6 6,6 0,07 M/P060 50 5 2 5 2 32,5 33 30 5 50 65,6 3 9 0, M/P06 63 50 6 5 2 0,5 37 35 50 52 67,6 5 9 0,8 M/P062 80 63 6 8 50,5 7 0 60 66 86 2,5 5 0,28 M/P063 00 7 20 8 5 60,5 55 50 70 76 96 2,5 9 0,2 M/P06 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en.5.230.
P/822000/M, P/822000 Smoothline cylinder Universal rear eye U Conforms to ISO 5552, type MP6 Narrow hinge SS Dimensions in mm Projection/First angle EX Z Z DL CX H 7 MS L 2 ø CK G 7 EM ø EB ø HB PH BT B GL TE U UL CN H7 EN E FL Z kg (U) 32 0 6 22,5 3 0,5 Q/8032/33 0 2 6 8 25 8 3 0,25 Q/800/33 50 6 2 2 27 9 5 0,0 Q/8050/33 63 6 2 23 32 2 5 0,55 Q/8063/33 80 20 25 28 36 2 5 0,90 Q/8080/33 00 20 25 30 29 5,50 Q/800/33 Corrosion protected version 32 0 6 22,5 3 0,5 PVQ/8032/33 0 2 6 9 25 8 3 0,25 PVQ/800/33 50 6 2 2 27 9 3 0, PVQ/8050/33 63 6 2 2 32 2 5 0,55 PVQ/8063/33 80 20 25 28 36 2 5 0,9 PVQ/8080/33 00 20 25 30 29 5,5 PVQ/800/33 C CNG7 D H2 EM G G2 G3 K K2 L S kg (SS) 32 32 0 8 0 2 8 3 38 5,6 0 6,6 0,5 M/P993 0 36 2 0 2 2 22 35 5,6 6,6 0,20 M/P9932 50 5 6 5 2 6 33 30 5 50 65,6 3 9 0,8 M/P9933 63 50 6 5 2 6 37 35 50 52 67,6 5 9 0,50 M/P993 80 63 20 8 20 7 0 60 66 86 2,5 5 0,75 M/P9935 00 7 20 8 5 20 55 50 70 76 96 2,5 9,20 M/P9936 ssembly kit for four-position cylinder L Switch mounting bracket QM/33/822/22 For switches (ø 8 mm) QM/33, QM/3 or QM/3 only! Useable for all cylinder ø. 2 E 8 20,5 Swivel hinge US Conforms to VDM 2562 part 2 EN -0, EU Z E L 2 kg 32 7 2,5 0 5 0,0 QM/92032/55 0 53 2,5 0 5 0,05 QM/9200/55 50 65,5 5 3 6 0,0 QM/92050/55 63 75 5 3 6 0,3 QM/92063/55 80 95 20 7 8 0,3 QM/92080/55 00 6 20 7 8 0,50 QM/9200/55 E G ø D3 Z L5 H6 CH ø CN H 7 ø S5 K K 2 CH CNH7 D EN -0, E EU G G2 G3 H2 K K2 L S Z kg (US) 32 32 0 6 0,5 2 8 3 0 38 5,6 6,6 3 0,9 M/P030 0 36 2 6 8 2 2 22 35 0 5,6 6,6 3 0,2 M/P03 50 5 6 5 2 2 5 33 30 5 2 50 65,6 9 3 0,6 M/P032 63 50 6 5 2 23 5 37 35 50 2 52 67,6 9 5 0,59 M/P033 80 63 20 8 25 28 8 7 0 60 66 86 2,5 5,03 M/P03 00 7 20 8 25 30 8 55 50 70 5 76 96 2,5 5,0 M/P035 G 2 G 3 en.5.230.2 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7
P/822000/M, P/822000 Smoothline cylinder Technical data - eed switches - additional informations see data sheet N/en.3.005 Symbol Voltage Current maximum Function Temperature LED Protection class Plug Cable length Cable type Weight (V a.c.) (V d.c.) (m) ( C) (m) (g) ~ + BN 0... 20 0... 70 80 Closer -25... +80 IP66 2, 5 or 0 PVC 2 x 0,25 37 M/50/LSU/*V 0... 20 0... 70 80 Closer -25... +80 IP66 5 PU 2 x 0,25 37 M/50/LSU/5U ~ BU BN BU 0... 20 0... 70 80 Closer -25... +50 IP66 2 Silicon 2 x 0,25 37 TM/50/U/2S BK BU BN + BN ~ 0... 20 0... 70 80 Changeover -25... +80 IP66 5 PVC 3 x 0,25 37 M/50/C/5V 0... 60 0... 60 80 Closer -25... +80 IP66 M8 x 0,3 PVC 3 x 0,25 6 M/50/LSU/CP *) ~ BK * Insert cable length; *) Plug-in connector see page ; Color code: BK = black, BN = brown, BU = blue Drawings M/50/LSU/*V, M/50/LSU/5U, TM/50/U/2S Cable length L = 2, 5 or 0 m -B 5, 30 L +30 50 +0 Dimensions in mm Projection/First angle ø 6,,5 B 2 M/50/C/5V Cable length L = 5 m -B 5, 30 L +30 50 +0 ø 6,,5 B 3 M/50/LSU/CP -B 5, 30 300 ±5 3,5... 36 X BK ø 6,,5 B X BN 3 BU Fixing screw 2 + BN = brown; - BU = blue (output) 3 - BK = black; + BN = brown; - BU = blue Plug M8 x, color code: BK = black; BN = brown; BU = blue ccessories Plug-in connector cable with nut Outer cover Cable length (m) Weight (kg) Connector Connector PVC 3 x 0,25 5 m 0,8 M8 x M/P7300/5 PU 3 x 0,25 5 m 0,8 M8 x M/P73002/5 PU 3 x 0,3 5 m 0,2 M2 x M/P359/5 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en.5.230.3
P/822000/M, P/822000 Smoothline cylinder Technical data - Solid state - additional informations see data sheet N/en.3.007 Symbol pnp + BN BU BK Voltage (V d.c.) Current maximum (m) Function Temperature ( C) LED Protection class Plug Cable length (m) Cable type Weight (g) 0... 30 50 PNP -0... +80 IP67 2, 5 or 0 PVC 3 x 0,2 37 M/50/EP/*V 0... 30 50 PNP -0... +80 IP68 5 PU 3 x 0, 37 M/50/EP/5U pnp npn npn 3 3 + BN BU BK BU + BN BK + BU BN BK 0... 30 50 PNP -0... +80 IP67 M8 x 0,3 PVC 3 x 0, 6 M/50/EP/CP *) 0... 30 50 PNP -0... +80 IP67 M2 x 0,3 PVC 3 x 0, 6 M/50/EP/CC *) 0... 30 50 NPN -0... +80 IP67 2, 5 or 0 PVC 3 x 0,2 37 M/50/EN/*V 0... 30 50 Closer -0... +80 IP67 M8 x 0,3 PVC 3 x 0, 6 M/50/EN/CP *) * Insert cable length; *) Plug-in connector below; Color code: BK = black, BN = brown, BU = blue Drawings M/50/EP/*V, M/50/EN/*V Cable length L = 2, 5 or 0 m -B +30 L 5, 30 2 ± Dimensions in mm Projection/First angle ø 6,,5 B 2 M/50/EP/CP, M/50/EN/CP -B 5, 30 300 ±5 3,5... 36 X BK ø 6,,5 B 3 X BN 3 BU M/50/EP/CC -B 5, 30 7,5 300 ±5 X BK 3 BU ø 6,,5 X BN Fixing screw 2 Color code: BK = black; BN = brown; BU = blue 3 Plug M8 x Plug M2 x en.5.230. without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7