PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting
|
|
- Cordelia Whitehead
- 6 years ago
- Views:
Transcription
1 > > mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance and long life > > djustable integrated end position sensing option > > lternative air ports as standard > > Wide range of cylinder variants Technical features Medium: Compressed air, filtered, lubricated or non-lubricated : Based on ISO 5552 (length, mounting pitch and thread dimensions according to ISO Some outside dimension different form ISO 5552) Operation: Double acting, magnetic or non magnetic piston, adjustable cushioning Operating pressure:... 0 bar ( psi) Port size: G/8, G/4, G3/8 Cylinder diameters: 32, 40, 50, 63, 80, 00 mm strokes: See below Non-standard strokes: vailable ( mm) Operating temperature: C max. ( F) ir supply must be dry enough to avoid ice formation at temperatures below +2 C. (+35 F) Switching voltage: V d.c. Protection class: IP67 Materials: Profile barrel: anodised aluminium, nd covers: pressure diecast anodised aluminium Piston rod: stainless steel, see page 2 Piston rod seals: PU Piston seals: PU O-rings: NB Technical data Cylinder (mm) Port size G/8 G/8 G/8 G/4 G/4 G3/8 Piston rod (mm) Piston rod thread M0 x,25 M2 x,25 M6 x,5 M6 x,5 M20 x,5 M20 x,5 Cushion length (mm) Theoretical thrusts at 6 bar outstroke (N) Theoretical thrusts at 6 bar instroke (N) ir consumption at 6 bar outstroke (l/cm) 0,056 0,088 0,37 0,28 0,35 0,55 ir consumption at 6 bar instroke (l/cm) 0,05 0,076 0,7 0,98 0,324 0,54 strokes Cylinder (mm) Stroke length (mm) without notice, the specifications given in this document. ( c) 205 Norgren GmbH en
2 Cylinder variants - non-magnetic piston Symbol S C D V Model Non-magnetic piston Description P../ cylinder 7 P../842000/W Cylinder wi h special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand,hoar-frost or ice) P../842000/IU Cylinder wi h extended piston rod 7 P../842000/W5 Cylinder wi h extended piston rod and special wiper/seal (suitable for applications wi h cement, plaster (stucco), arizona sand, hoar-frost or ice) P../842000/G Cylinder wi h piston rod bellows 9 Dimensions Page P../842000/J Cylinder wi h double ended piston rod 9 P../842000/W3 Cylinder wi h double ended piston rod and special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand, hoar-frost or ice) P../842000/L2 Cylinder wi h locking unit (passive) spring force on removal of the signal to the unit. Operating pressure for locking unit: bar 0 Cylinder variants - magnetic piston Symbol Model Description Dimensions S C D V magnetic piston Page P../842000/MI cylinder 8 P../842000/W2 Cylinder wi h special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand,hoar-frost or ice) P../842000/MU Cylinder wi h extended piston rod 8 P../842000/W6 Cylinder wi h extended piston rod and special wiper/seal (suitable for applications wi h cement, plaster (stucco), arizona sand, hoar-frost or ice) P../842000/MG Cylinder wi h piston rod bellows 9 P../842000/L4 Cylinder wi h locking unit (passive) spring force on removal of the signal to the unit. Operating pressure for locking unit: bar 0 For the cylinder models style, S, C, D, V and see options selector en without notice, the specifications given in this document. ( c) 205 Norgren GmbH
3 Option selector Piston rod material Substitute (martensitic); wiper seal (austenitic); wiper seal S Hard chromium plated; C wiper seal (austenitic); D hard chromium plated; wiper seal (austenitic); V Smooth wiper seal (austenitic); hard chromium plated; Smooth wiper seal Cylinder (mm) Substitute 032, 040, 050, 063, 080, 00 Note: If option is not required, disregard option position within part number, eg. P/842032/00. For combinations of cylinder variants consult our Technical Service. This options selector explains only the cylinder variants. dditional variants/options can not be derived from. P /842 / / Strokes (mm) 2000 max. Switch variants Substitute Wi hout None djustable eed switch position 3 djustable solid state switch position 4 Variants (magnetic piston) Substitute MI Special wiper seal W2 Piston rod bellow MG xtended piston rod MU Special wiper seal, extended piston rod W6 P**/842***/MU/****/*** /W6/ xtension (mm) Piston rod locking unit L4 Variants (non-magnetic piston) Substitute None Double ended piston rod J Special wiper seal W Double ended piston rod, W3 special wiper seal Piston rod bellow G xtended piston rod IU Special wiper seal, extended piston rod W5 P**/842***/IU/****/*** /W5/ xtension (mm) Piston rod locking unit L2 without notice, the specifications given in this document. ( c) 205 Norgren GmbH en
4 Mountings and service kit Position Style Corrosion protected B, G Clear anodised aluminium Clear anodised aluminium. Screws: 2 X 5 Cr Ni 8 0 (.430; ISI 304). Screws: 2 2 C Galvanized steel (ø mm) X 5 Cr Ni 8 0 (.430; ISI 304). Screws: 2 Painted steel (ø 80 & 00 mm) 3 Diecast aluminium Black corrosion protected diecast aluminium. Certified - for the food industry. Screws: 2 4 U Galvanized aluminium Inner ring: steel Outer ring: brass Black corrosion protected diecast aluminium Certified for he food industry Inner ring: stainless Steel (austenitic) Outer ring: nickel plated hardened steel - 5 D Diecast aluminium Bolt: galvanized steel (martensitic) Circlip: galvanized steel Black corrosion protected diecast aluminium Certified for he food industry Bolt: X 0 Cr Ni S 8 9 (.4305, ISI 303) Circlip: (martensitic). Screws: 2 X 5 Cr Ni 8 0 (.430; ISI 304). Screws: 2 Bolt: X 0 Cr Ni S 8 9 (.4305; ISI 303) 6 SW Diecast aluminium Black corrosion protected diecast aluminium X 6 Cr Ni 8 9 (.4308; ISI 304) Certified for he food industry 7 US Galvanized aluminium. Inner ring: steel Outer ring: brass 8 D2 Painted cast iron. Bolt: stainless steel (martensitic) Circlip: galvanized steel 9 FH Cast iron 0 Galvanized steel Screw X 0 Cr Ni S 8 9 (.4305, ISI 303) 2 S Clear anodised aluminium Bearing: brass 5 F Galvanized steel Bolt: galvanized steel Circlip: Galvanized steel Nickel plated steel Circlip: X 0 Cr Ni S 8 9 (.4305, ISI 303) Bolt: X 0 Cr Ni S 8 9 (.4305, ISI 303) 6 SS Painted cast iron 7 UF Galvanized steel. Inner ring: steel Outer ring: brass Nickel plated steel. Inner ring: stainless steel (austenitic) Outer ring: nickel plated hardened steel. 8 K Galvanized steel X 0 Cr Ni S 8 9 (.4305; ISI 303) Bolt: X 0 Cr Ni S 8 9 (.4305; ISI 303) yebolt: X 0 Cr Ni S 8 9 (.4305; ISI 303) X 0 Cr Ni S 8 9 (.4305; ISI 303), Inner ring X 05 Cr Co Mo 8-2 (.4528), Outer ring X 5 Cr Ni 8 0 (.430; ISI 304) en without notice, the specifications given in this document. ( c) 205 Norgren GmbH
5 Mountings Model K B, G C D D2 F FH Cyl. 0 Page 8 Page Page 2 Page 5 Page 2 8 Page 2 5 Page 2 9 Page 2 3 Page 3 32 QM/8032/35 QM/8025/38 Q/8032/22 Q/8032/2 Q/8032/23 Q/8032/42 QM/8025/25 Q/8032/34 Q/8032/27 40 QM/8032/35 QM/8040/38 Q/8040/22 Q/8040/2 Q/8040/23 Q/8040/42 QM/8040/25 Q/8040/34 Q/8040/27 50 QM/8050/35 QM/8050/38 Q/8050/22 Q/8050/2 Q/8050/23 Q/8050/42 QM/8050/25 Q/8050/34 Q/8050/27 63 QM/8050/35 QM/8050/38 Q/8063/22 Q/8063/2 Q/8063/23 Q/8063/42 QM/8050/25 Q/8063/34 Q/8063/27 80 QM/8080/35 QM/8080/38 Q/8080/22 Q/8080/2 Q/8080/23 Q/8080/42 QM/8080/25 Q/8080/34 Q/8080/27 00 QM/8080/35 QM/8080/38 Q/800/22 Q/800/2 Q/800/23 Q/800/42 QM/8080/25 Q/800/34 Q/800/27 Corrosion protected 32 PVQ/8032/22 PVQ/8032/23 PVQM/8025/25 PVQ/8032/27 40 PVQ/8040/22 PVQ/8040/23 PVQM/8040/25 PVQ/8040/27 50 PVQ/8050/22 PVQ/8050/23 PVQM/8050/25 PVQ/8050/27 63 PVQ/8063/22 PVQ/8063/23 PVQM/8050/25 PVQ/8063/27 80 PVQ/8080/22 PVQ/8080/23 PVQM/8080/25 PVQ/8080/27 00 PVQ/800/22 PVQ/800/23 PVQM/8080/25 PVQ/800/27 32 KQ/8032/22 KQ/8032/2 KQ/8032/23 KQM/55433/25 40 KQ/8040/22 KQ/8040/2 KQ/8040/23 KQM/5544/25 50 KQ/8050/22 KQ/8050/2 KQ/8050/23 KQM/5545/25 63 KQ/8063/22 KQ/8063/2 KQ/8063/23 KQM/5545/25 80 KQ/8080/22 KQ/8080/2 KQ/8080/23 KQ/8080/25 00 KQ/800/22 KQ/800/2 KQ/800/23 KQ/8080/25 S SS SW UF U US Cover screws Magnetically operated switches Cyl. 2 Page 3 6 Page 4 6 Page 3 7 Page 3 4 Page 4 7 Page 4 Page 4 32 Q/8032/4 M/P993 M/P9493 QM/8025/32 Q/8032/33 M/P Q/8040/4 M/P9932 M/P9494 QM/8040/32 Q/8040/33 M/P Q/8040/4 M/P9933 M/P9495 QM/8050/32 Q/8050/33 M/P Q/8063/4 M/P9934 M/P9496 QM/8050/32 Q/8063/33 M/P Q/8063/4 M/P9935 M/P9497 QM/8080/32 Q/8080/33 M/P Q/800/4 M/P9936 M/P9498 QM/8080/32 Q/800/33 M/P4035 Corrosion protected 32 M/P40459 PVQM/8025/32 PVQ/8032/33 40 M/P40460 PVQM/8040/32 PVQ/8040/33 50 M/P4046 PVQM/8050/32 PVQ/8050/33 63 M/P40462 PVQM/8050/32 PVQ/8063/33 80 M/P40463 PVQM/8080/32 PVQ/8080/33 00 M/P40464 PVQM/8080/32 PVQ/800/33 32 M/P72288 KQM/8032/32 PVQ/882032/88 40 M/P72289 KQM/8040/32 PVQ/882032/88 50 M/P72290 KQM/8050/32 PVQ/882050/88 63 M/P7229 KQM/8050/32 PVQ/882050/88 80 M/P72292 KQM/8080/32 PVQ/882080/88 00 M/P72293 KQM/8080/32 PVQ/882080/88 25 Page 5 without notice, the specifications given in this document. ( c) 205 Norgren GmbH en
6 M2 cables Cable length Plug with moulded cable IP 67 Wiring diagram for M2 male connector Pin Features Colour Service kit Service Kit V d.c. Brown 2 Signal (outstroke) White 3 Not used Blue 4 Signal (instroke) Black (m) 2 Cyl. 2 M/P73525/2 5 M/P73525/5 0 M/P73525/0 32 PQ/842032/00 40 PQ/842040/00 50 PQ/842050/00 63 PQ/842063/00 80 PQ/842080/00 00 PQ/84200/00 en without notice, the specifications given in this document. ( c) 205 Norgren GmbH
7 Dimensions; non-magnetic piston L2 G5 ø Dimensions in mm Projection/First angle KW ø B e MM h KK T ø B e T KV SW BG G BH 4 8 ø 80 & 00 PL2 5 2 PL M VD L2 WH G PL 9 PL V G L8 + # - - ø ø 80 & 00 7 BH T T T L9 BG BG # Stroke Cushion adjustment front end cover 7 ir supply, cylinder instroke 8 ir supply, cylinder outstroke 9 lternative air supply, cylinder instroke 4 Cushion adjustment rear end cover Cyl M B e B e BG BH G G G3 KK KW L2 L8 L G/ ,5 M0x, , G/ ,5 M2x, , ,5 G/8 4 55,5 24,5 M6x, ,5 49 G/ ,5 M6x, ,5 G/ M20x, ,5 G3/8 24, ,5 M20x, Cyl L2 MM PL PL PL2 T V VD WH KV SW at 0 per 25 mm Model h9 mm 32 4, ,5 4 32,5 M ,56 kg 0,07 kg P/842032/* 40 6, , M 6 3, ,93 kg 0, kg P/842040/* 50 6, ,5 4 46,5 M 8 3, ,48 kg 0,8 kg P/842050/* 63 6,5 20 9,5 4,5 6 56,5 M ,32 kg 0,9 kg P/842063/* 80 7,5 25 9, M ,02 kg 0,29 kg P/842080/* ,5 8,5 89 M ,24 kg 0,35 kg P/84200/* * Please insert standard stroke length without notice, the specifications given in this document. ( c) 205 Norgren GmbH en
8 Dimensions; magnetic piston 24,3 G4 ø M2x Dimensions in mm Projection/First angle ø B e MM h 9 KK L2 KW G5 T ø B e 4 5 T 2,5 2 KV SW BG G BH X PL ø 80 & 00 9 L8 + # ø ø 80 & 00 T T PL2 M VD L2 WH G PL G PL V 5 T 2 BH L9 BG BG # Stroke Cushion adjustment front end cover 2 Magnetically operated switches (F ) 7 ir supply, cylinder instroke 8 ir supply, cylinder outstroke 9 lternative air supply, cylinder instroke 4 Cushion adjustment rear end cover Cyl M Be Be BG BH G G G4 G5 KK KW L2 L8 L G/ ,5 M0x, , G/ ,5 M2x, , ,5 G/8 4 55,5 42,5 24,5 M6x, ,5 49 G/ ,5 29,5 M6x, ,5 G/ M20x, ,5 G3/8 24, ,5 36,5 M20x, Cyl L2 MMh9 PL PL PL2 T V VD WH X KV SW at 0 mm per 25 mm Model 32 4, ,5 4 32,5 M ,56 kg 0,07 kg P/842032/MI+/* 40 6, , M 6 3, ,93 kg 0, kg P/842040/MI+/* 50 6, ,5 4 46,5 M 8 3, , ,48 kg 0,8 kg P/842050/MI+/* 63 6,5 20 9,5 4,5 6 56,5 M , ,32 kg 0,9 kg P/842063/MI+/* 80 7,5 25 9, M ,02 kg 0,29 kg P/842080/MI+/* ,5 8,5 89 M ,24 kg 0,35 kg P/84200/MI+/* * Please insert standard stroke length + Magnetically switch variants en without notice, the specifications given in this document. ( c) 205 Norgren GmbH
9 Cylinder variants P/842000/J Cylinder double ended piston rod; non-magnetic piston ø ø 80 & 00 L8 + # ZM + 2 x # Cyl. L8 ZM Model Non-magnetic piston P/842032/J/* P/842040/J/* P/842050/J/* P/842063/J/* P/842080/J/* P/84200/J/* * Please insert standard stroke length # Stroke Two threads can t be used for mountings P/842000/G Cylinder with piston rod bellow; non-magnetic piston B ø ø P/842000/MG Cylinder with piston rod bellow; magnetic piston B Cyl. Stroke max per bellow Piston rod extention B for first bellow for further bellows Model Non-magnetic piston Model Magnetic piston P/842032/G/* P/842032/MG+/* P/842040/G/* P/842040/MG+/* P/842050/G/* P/842050/MG+/* P/842063/G/* P/842063/MG+/* P/842080/G/* P/842080/MG+/* P/84200/G/* P/84200/MG+/* * Please insert standard stroke length + Magnetically switch variants without notice, the specifications given in this document. ( c) 205 Norgren GmbH en
10 P/842000/L2 Cylinder with piston rod bellow - non-magnetic piston B L 8 + # J N ø B e T M VD D K WH F H G L P/842000/L4 Cylinder with piston rod bellow - magnetic piston B L 8 + # J N ø B e T M VD D K WH F H G L Cyl B D F G H J K L M N B e , M , , M 5 2 6, , M , M M M Cyl L 8 T VD WH Locking force Model; non-magnetic piston Model; non-magnetic piston 32 M ,5 M N P/842032/L2/* P/842032/L4+/* 40 G / M N P/842040/L2/* P/842040/L4+/* 50 G / ,5 M N P/842050/L2/* P/842050/L4+/* 63 G /8 2 56,5 M N P/842063/L2/* P/842063/L4+/* 80 G / M N P/842080/L2/* P/842080/L4+/* 00 G / M N P/84200/L2/* P/84200/L4+/* * Please insert standard stroke length + Magnetically switch variants en without notice, the specifications given in this document. ( c) 205 Norgren GmbH
11 Mountings Front or rear stud mounting Conforms to ISO 5552, type MX Piston rod swivel K Dimensions in mm Projection/First angle BB DD TG TG KK KK BB DD TG kg Model () 32/40 7 M6 32,5/38 0,02 QM/8032/35 50/63 23 M8 46,5/56,5 0,05 QM/8050/35 80/00 28 M0 72/89 0,08 QM/8080/35 Front flange B, G Conforms to ISO 5552, type MF and MF2 4 B L 2 KK B F L L2 kg Model (K) M0x, ,20 QM/8025/38 40 M2x, ,20 QM/8040/38 50/63 M6x, ,65 QM/8050/38 80/00 M20x, ,72 QM/8080/38 Foot mounting C Conforms to ISO 5552, type MS L F MF UF TF FB T H U O ø B T FB MF TF UF kg Model (B, G) ,25 Q/8032/ ,35 Q/8040/ ,70 Q/8050/ ,80 Q/8063/ ,35 Q/8080/ ,20 Q/800/22 Corrosion protected version ,25 PVQ/8032/ ,35 PVQ/8040/ ,7 PVQ/8050/ ,8 PVQ/8063/ ,35 PVQ/8080/ ,2 PVQ/800/ ,26 KQ/8032/ ,3 KQ/8040/ ,56 KQ/8050/ ,73 KQ/8063/ ,73 KQ/8080/ ,5 KQ/800/22 B H O T U T kg Model (C) ,5 Q/8032/ ,8 Q/8040/ ,30 Q/8050/ ,39 Q/8063/ ,80 Q/8080/ ,95 Q/800/ ,6 KQ/8032/ ,9 KQ/8040/ ,32 KQ/8050/ ,4 KQ/8063/ ,83 KQ/8080/ ,98 KQ/800/2 without notice, the specifications given in this document. ( c) 205 Norgren GmbH en
12 ear clevis D Conforms to ISO 5552, type MP2 LH ear clevis D2 Conforms to ISO 5552, type B6 Dimensions in mm Projection/First angle UB FL B2 CB H 4 L B H 4 FL K e 8 B3 2 K h 9 M CB H4 K e8 FL L LH M UB kg Model (D) , Q/8032/ ,6 Q/8040/ ,22 Q/8050/ ,34 Q/8063/ ,54 Q/8080/ ,90 Q/800/23 Corrosion protected version , PVQ/8032/ ,6 PVQ/8040/ ,22 PVQ/8050/ ,34 PVQ/8063/ ,54 PVQ/8080/ ,9 PVQ/800/ , KQ/8032/ ,6 KQ/8040/ ,22 KQ/8050/ ,34 KQ/8063/ ,54 KQ/8080/ ,9 KQ/800/23 B H4 B2 B3 K h9 FL 2 kg Model (D2) , ,20 Q/8032/ , ,23 Q/8040/ , ,5 22 0,36 Q/8050/ , ,55 Q/8063/ , ,90 Q/8080/ , ,45 Q/800/42 Piston rod clevis F Conforms to DIN ISO 840 C L K CL CM ø CK h Front or rear detachable trunnion FH Conforms to VDM part 2, type MT 5/6 L CL KK UW TD e 9 KK C CKh CL CM L K kg Model (F) 32 M0x, ,09 QM/8025/25 40 M2x, ,3 QM/8040/25 50/63 M6x, ,5 0,33 QM/8050/25 80/00 M20x, ,67 QM/8080/25 Corrosion protected version 32 M0x, ,09 PVQM/8032/25 40 M2x, ,3 PVQM/8040/25 50/63 M6x, ,5 0,33 PVQM/8050/25 80/00 M20x, ,67 PVQM/8080/25 32 M0x, ,09 KQM/55433/25 40 M2x, ,3 KQM/5544/25 50/63 M6x, ,5 0,33 KQM/5545/25 80/00 M20x, ,67 KQM/8080/25 D H TM h4 D h L TD e9 TL TM h4 UW kg Model (FH) ,20 Q/8032/ , ,38 Q/8040/ , ,60 Q/8050/ , ,0 Q/8063/ , ,90 Q/8080/ ,50 Q/800/34 TL en without notice, the specifications given in this document. ( c) 205 Norgren GmbH
13 ear eye Conforms to ISO 5552, type MP4 Trunnion support S Conforms to ISO 5552, type T4 Dimensions in mm Projection/First angle FL ø D 3 W L CD H 9 T H 2 H H7 ø D F x 45 ø D 2 C B 2 M B CD H9 W FL L M kg Model () , ,09 Q/8032/ , , Q/8040/ , ,7 Q/8050/ , ,24 Q/8063/ , ,37 Q/8080/ , ,59 Q/800/27 Corrosion protected version , ,09 PVQ/8032/ , , PVQ/8040/ , ,7 PVQ/8050/ , ,24 PVQ/8063/ , ,37 PVQ/8080/ , ,59 PVQ/800/27 Universal piston rod eye UF Conforms to DIN ISO 839 B C F x H T kg Model 2 DH7 D2 D (S) ,5 2 6, ,8 0,0 Q/8032/4 40/ , ,4 Q/8040/4 63/ , ,8 Q/8063/ , ,34 Q/800/4 Wide hinge SW Conforms to ISO 5552, type B7 CN H 7 C N -0, ø CK H 9 M G ø D KK Z Z C Thread KK X C CN H7 L N -0, L Z kg Model (UF) 32 M0x, ,09 QM/8025/32 40 M2x, ,3 QM/8040/32 50/63 M6x, ,33 QM/8050/32 80/00 M20x, ,67 QM/8080/32 Corrosion protected version 32 M0x, ,09 PVQM/8025/32 40 M2x, ,3 PVQM/8040/32 50/63 M6x, ,33 PVQM/8050/32 80/00 M20x, ,4 PVQM/8080/32 32 M0x, , ,07 KQM/8032/32 40 M2x, , , KQM/8040/32 50/63 M6x, , ,2 KQM/8050/32 80/00 M20x, , ,38 KQM/8080/32 X L ø S K K 2 G 2 G 3 C CKH9 D H2 M G G2 G3 K K2 L S kg Model (SW) , ,6 0 6,6 0,05 M/P , ,6 6,6 0,07 M/P , , ,4 M/P , , ,8 M/P , ,5 5 0,28 M/P , ,5 9 0,42 M/P9498 Corrosion protected version , ,6 0 6,6 0,05 M/P , ,6 6,6 0,07 M/P , , ,4 M/P , , ,8 M/P , ,5 5 0,28 M/P , ,5 9 0,42 M/P ,6 0 6,6 0,5 M/P ,6 6,6 0,2 M/P , ,4 M/P , ,53 M/P ,5 5 0,82 M/P ,5 9,22 M/P72293 H 2 without notice, the specifications given in this document. ( c) 205 Norgren GmbH en
14 Universal rear eye U Conforms to ISO 5552, type MP6 Narrow hinge SS Dimensions in mm Projection/First angle N Z FL CN H 7 ø CN G 7 ø D M C G Z L ø S H 2 G 2 K G 3 K 2 CN H7 N FL Z kg Model (U) ,5 3 0,5 Q/8032/ ,25 Q/8040/ ,40 Q/8050/ ,55 Q/8063/ ,90 Q/8080/ ,50 Q/800/33 Corrosion protected version ,5 3 0,5 PVQ/8032/ ,25 PVQ/8040/ ,4 PVQ/8050/ ,55 PVQ/8063/ ,9 PVQ/8080/ ,5 PVQ/800/33 C CNG7 D H2 M G G2 G3 K K2 L S kg Model (SS) ,6 0 6,6 0,5 M/P ,6 6,6 0,20 M/P , ,48 M/P , ,50 M/P ,5 5 0,75 M/P ,5 9,20 M/P9936 Swivel hinge US Conforms to VDM part 2 N 0, ø CN H 7 U Z G ø D Z L H 2 CH ø S G 2 K G 3 K 2 CH CN H7 D N -0, U G G2 G3 H2 K K2 L S Z kg Model (US) , ,6 6,6 3 0,9 M/P ,6 6,6 3 0,24 M/P , ,46 M/P , ,59 M/P ,5 5,03 M/P ,5 5,40 M/P4035 Cover screw (stainless steel) M K L M K L kg Model 32/40 M6 0 5,5 0,5 0,08 PVQ/882032/88 50/63 M8 3 6,8 0,5 0,04 PVQ/882050/88 80/00 M0 7 8,4 0 0,072 PVQ/882080/88 en without notice, the specifications given in this document. ( c) 205 Norgren GmbH
15 Technical data - eed switches - additional informations see data sheet N/en Symbol Voltage *2) Current maximum Function Temperature LD Protection class Features Cable length (m) Cable type Weight Model (V a.c.) (V d.c.) (m) ( C) (g) ~ + BN Closer IP66 2 PVC 2 x 0,25 37 M/50/LSU/2V ~ BU *2) Supply voltage 24 V d.c. (± 0%) max for P./88200/M only. ttention: eed switches for mm useable only! Drawings M/50/LSU/2V, Cable length L = 2 m -B L +30 Dimensions in mm Projection/First angle 5, ø 6,4,5 B 2 Fixing screw 2 Color code: BK = black; BN = brown; BU = blue Technical data - Solid state - additional informations see data sheet N/en Symbol Voltage *2) (V d.c.) pnp + BN BU BK Current max. (m) Function Temperature LD Protection class Features Cable length Cable type Weight Model ( C) (m) (g) PNP IP67 2 PVC 3 x 0,2 37 M/50/P/2V *2) Supply voltage 24 V d.c. (± 0%) max for P./88200/M only. Drawings M/50/P/2V, Cable length L = 2 m -B L ±4 5, 30 ø 6,4,5 B 2 Fixing screw 2 Color code: BK = black; BN = brown; BU = blue Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NOGN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. without notice, the specifications given in this document. ( c) 205 Norgren GmbH en
PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting
P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard
More informationStrokes (mm) N/en
IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated
More informationLPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
More informationLRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting
> > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)
More informationPRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting
> ø 3... 100 mm > Complete functional unit with LED display > TEX-zones depending on pilot control: zones &, II 3GD, Valve control module (VCM) zones 1 & 1, II GD, Pilot control on separate specification
More informationPRA/182000, PRA/182000/M
Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane
More informationRA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and
More informationLPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
More informationOur policy is one of continued research and development. We therefore reserve the right
Corrosion resistant design Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Magnetic Piston Double Acting Ø 32 to 100 mm Accepted in the Food Industry Conforms to ISO 6431, VDMA 24562 and NFE
More informationRA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
More informationOur policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
More informationLRM/55401/M, Roundline cylinder Magnetic piston, double acting
LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and
More informationRA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
More information12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
More informationKA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
More informationPVA/182000, PVA/182000/M
Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to
More informationRM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
More informationAvailable: Cylinders till july 2000 Spares till july /98 N
Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line
More informationM/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
More informationPRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
More informationOur policy is one of continued research and development. We therefore reserve the right 1/98 N
ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:
More informationPRA/801000, PRA/803000, RA/801000, RA/ ISOLine cylinder, single acting
PR/80000, PR/80000, R/80000, R/80000 > ø 2... 00 mm > High performance adaptive cushioning system CS > High performance, stability and reliability Technical features Medium: Compressed air, filtered, lubricated
More informationNFPA Double acting imperial cylinders
> > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,
More informationPRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
More information10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
More information1/96 N Our policy is one of continued research and development. We therefore reserve the right
Roundline Cylinders Magnetic Piston Double cting 8 to 63 mm Very compact and shorter than the basic length of a corresponding ISO/VDM and roundline cylinder. Magnetic piston as standard provides a wide
More informationOur policy is one of continued research and development. We therefore reserve the right 10/99 N
Stainless Steel ISO Cylinders Magnetic Piston Double Acting Ø 12 to 25 mm High corrosion and acid resistance Magnetic piston as standard Conforming to ISO 6432 Suitable for applications in the Food Industry
More informationRM/57200/M, RT/57200/M
Roundline Cylinders Magnetic Piston Double Acting Ø 8 to 63 mm Three different basic versions provide flexibility and wide range of application Magnetic piston as standard provides a wide range of control
More informationPRA/182000, PRA/182000/M ISO/VDMA Profile cylinders
P/182000, P/182000/M IO/VDM Profile cylinders onforms to IO 15552, IO 6431, VDM 24562 and NFE 49-003-1 Profile barrel with concealed tie rods High performance, stability and reliability Polyurethane seals
More informationM/ Rotary cylinders Rack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 125 mm
otary cylinders ack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 25 mm Suitable torques from,2 to 5,0 Nm/bar otation angles 90, 80, 270, 360 Adjustable cushioning Male and female
More informationM/146000/EX, M/146100/EX, M/146200/EX, LINTRA PLUS cylinder Magnetic & Non-magnetic piston, double acting
M/46000/X, M/4600/X, M/4600/X, LINTR PLUS cylinder > Ø 6... 80 mm > New lightweight design extrusion with universal mounting grooves > Proved and patented sealing system > Interchangeability with series
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationRM/28000/M Roundline cylinders (ISO)
RM/28000/M Roundline cylinders (ISO) Single acting, ISO 6432 - Ø 10... 25 mm Magnetic piston as standard enerally conforms to ISO 6432 High strength, double crimped end cap design Corrosion resistant Nose
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
More informationACT-72. DA/8000 Double acting Ø mm
ISO/VDMA Cylinders DA/8000 Double acting Ø 32... 320 mm Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 High performance, ruggedness and reliability Extensive range of mountings Technical data Medium:
More informationM/146000, M/146100, M/146200
LINTR PLUS rodless cylinders Magnetic piston and non-magnetic piston Double acting Ø 3 to 50 mm New lightweight design extrusion with universal mounting grooves Proved and patented sealing system Dust
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationTie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationGuide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
More informationXG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationPneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationSeries ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More information-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationM/46800/M, M/46800/HM, M/46800/PM
External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance
More informationSTANDARDISED MOUNTINGS
STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationCompact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
More informationTube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table
Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston
More informationVERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
More informationSTANDARDISED MOUNTINGS
for PS / PLS / PC cylinders conforming ISO 15552-FNOR-DIN (PS-PLS) ISO 21287 (PC) standards Series 434 MOUNTINGS CONFORMING WITH ISO 21287 - ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More informationAZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.
Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials
More informationSingle and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
More informationP1D-B Pneumatic Cylinders
P1D-B Pneumatic Cylinders According to ISO 15552 P1D-B series. This series features a profile design and is the basic ISO cylinder for simple applications where no special options are required. This series
More informationTwin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
More informationbar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
More informationACTUATORS equipment engineering advantage
www.norgren.com/rail RAILINE PNEUMATIC MOTION & FLUID CONTROL SOLUTIONS YOU CAN SEE OUR THINKING engineering advantage ACTUATORS valves pressure switches AND transducers air line equipment fittings tubing
More information26230, NAMUR 3/2 & 5/2 Indirect solenoid actuated spool valves
60, 8007 NAMUR / & / > > Port size: G/ and NAMUR interface > > Easily interchangeable solenoid system > > For single and double operated actuators > > Standard manual override with detent > > Maintenance-free
More informationV160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C
V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of
More informationAssociated ranges. Body material. Stainless steel Aluminium
Associated ranges Series Body material Stainless steel Aluminium KA/8000,.../M Stainless steel tie-rod cylinders (ISO/VDMA) Double acting Ø 32 to 200 mm 216 KM/8000/M Stainless steel roundline cylinders
More informationSERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationStandard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
More informationCYLINDERS. Moving more than air
CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationAIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
More informationTie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
More informationM/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm
LINTRA Rodless cylinders Magnetic piston Double acting Ø 5 to 40 mm New compact, space-saving design Proven sealing system Integral switch mounting Adjustable cushioning Magentic piston as standard Technical
More informationProfile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationTie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
More informationHEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationA44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting
> > Ø 25... 40 mm > > New compact, spacesaving design > > Proven sealing system > > Integral switch mounting > > uffer or adjustable cushioning > > Standard foot mountings Technical features Medium: Compressed
More informationLarge Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
More informationISO Cylinders - P1D-B
Flange MF1/MF2 Intended for fixed mounting of cylinder. Flange can be fitted to front or rear end cover of cylinder. Materials Flange: Surface-treated steel Mounting screws acc. to DIN 6912: Zinc-plated
More informationISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
More informationISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
More informationSizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
More informationAir Cylinders Type : ISO-6431 & VDMA-24562
Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard
More informationMagnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
More informationT84T - Excelon Plus Modular System 3/2 shut-off valve
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > 3/2 way function > Threaded exhaust port > Lockable in closed
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationISO Technical details
Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke
More information