-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
|
|
|
- Harold Terry
- 6 years ago
- Views:
Transcription
1 Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters mm -T- Stroke lengths mm DNU DNUL with non-rotating piston rod Variants: S2: Through piston rod S3: Stainless steel piston rod S6: Heat resistant seals up to 150 C -W- Note Wearing parts kits Vol.1 / i-38 Double-acting With adjustable end-position cushioning at both ends For contactless end-position sensing DNUL: Secured against rotation by means of square piston rod S8: High corrosion resistance S26: Through piston rod with heatresistant seals up to 150 C The variants can be combined with one another Festo AG & Co. Products 2001 Subject to change 01/08
2 ISO and standard cylinders Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Mounting options Basic cylinder installation Mounting at front Mounting at rear Proximity sensor SMEO-1/SMTO-1/SMPO Accessories Mounting kit SMBU for proximity sensor 0-42 Installation types with mounting attachments Foot mounting HN Flange mounting FN front rear Clevis foot LN/LSN Trunnion support LNZ Swivel flange SN/SSN Trunnion mounting kit ZNU Cylinder accessories for piston rod Swivel flange SN with clevis foot LN Swivel flange SN with clevis foot LSN (lateral displacement max. 5 ) Guide unit FEN Adapter kit DPNN for four-position cylinder -127 Standard stroke lengths DNU-... Stroke length DNU-... DNUL /04 Subject to change Products 2001 Festo AG & Co. -119
3 Standard cylinders DNU/DNUL to ISO 6431 Overview and ordering data ISO and standard cylinders DNU/DNUL* Stroke DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A X stroke lengths DNU PPV-A DNU PPV-A DNU PPV-A Variant S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S2 Variant S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S3 Variant S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S6 Variant S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S8 Variant S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S26 with non-rotating piston rod X stroke lengths DNUL PPV-A DNUL PPV-A DNUL PPV-A Variant S DNUL PPV-A-S DNUL PPV-A-S DNUL PPV-A-S6 Accessories Foot mounting HN HN HN-50 Flange mounting FN FN FN-50 Trunnion mounting kit ZNU ZNU ZNU-50 Swivel flange 5153 SN SN SN-50 Spherical swivel flange SSN SSN SSN-50 Adapter kit DPNN-32** DPNN-40** DPNN-50** * The scope of delivery includes a hexagonal nut for the piston rod thread. ** Scope of delivery: 1 flange, 8 threaded studs, 8 DIN 125 washers and 8 hex nuts Festo AG & Co. Products 2001 Subject to change 01/08
4 ISO and standard cylinders Standard cylinders DNU/DNUL to ISO 6431 Overview and ordering data DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNU PPV-A-S DNUL PPV-A DNUL PPV-A DNUL PPV-A DNUL PPV-A-S DNUL PPV-A-S DNUL PPV-A-S HN HN HN FN FN FN ZNU ZNU ZNU SN SN SN SSN SSN SSN DPNN-63** DPNN-80** DPNN-100** 01/04 Subject to change Products 2001 Festo AG & Co. -121
5 Standard cylinders DNU/DNUL to ISO 6431 Technical data ISO and standard cylinders DNU/DNUL Max. operating pressure Temperature range Material Thrust at 6 bar* [N] 12 bar C (observe operating range of proximity sensor) Bearing and end caps: aluminium; cylinder barrel: anodised aluminium; piston rod: high-alloy steel; seals: polyurethane Return force at 6 bar* [N] Thrust = return force at 6 bar for S2 [Nm] Max. torque at the piston rod for DNUL** [Nm] Cushioning length G G G G G G Connection * Theoretical values ** The max. permissible torque must also be observed when fitting attachments to the piston rod. Weights DNU/DNUL Basic weight Weight per 10 mm stroke Mounting attachments/material HN FN Galvanised steel Die-cast aluminium ZNU Die-cast aluminium SN Die-cast aluminium SSN Spheroidal graphite cast iron Max. permissible torque at the piston rod for DNUL (Diagrams -123) Examples for 32 mm: Example 1: Stroke length = 150 mm Result: Permissible Lateral force = 9.5 N Lever arm = 84 mm Example 2: Lateral force = 40 N Result: Permissible Stroke length = 28 mm Lever arm = 20 mm Example 3: Stroke length = 150 mm Lever arm = 100 mm Max. Torque 800 Nmm F Q = Leverarm 100 mm =8N Result: Permissible F Q 8N F Q max. 9.5 N -122 Festo AG & Co. Products 2001 Subject to change 01/08
6 ISO and standard cylinders Standard cylinders DNU/DNUL to ISO 6431 Technical data Lateral force F Q in relation to stroke length and lever arm s DNUL DNUL-32 DNUL-40 Max. torque = 800 Nmm Max. torque = 1100 Nmm Lever arm s Lateral force FQ [N] Lever arm s Lateral force FQ [N] Stroke length max. 300 mm Stroke length max. 400 mm DNUL-50 DNUL-63 DNUL-80 DNUL-100 Max. torque = 1500 Nmm Max. torque = 3000 Nmm Lever arm s Lateral force FQ [N] Lever arm s Lateral force FQ [N] Stroke length max. 500 mm Stroke length max. 600 mm 01/04 Subject to change Products 2001 Festo AG & Co. -123
7 Standard cylinders DNU/DNUL to ISO 6431 Dimensions ISO and standard cylinders DNU/DNUL DNUL Variant S2/S26 1 Socket head screw with female thread 2 Regulating screw for adjustable end-position cushioning 3 Mounting kit SMBU-...-B for cylinder sensor 4 Cylinder sensors SMEO-1/SMTO-1/SMPO-1 + =plusstrokelength ++ = plus 2 x stroke lengths AM B f8 B1 f8 BG D4 D5 E EE J2 J3 J4 J5 J G G G G G G KK L1 L2 L7 MM f8 PL RT VA VD WH ZJ ZM 1 32 M10x M M12x M M16x M M16x M M20x M M20x M Festo AG & Co. Products 2001 Subject to change 01/08
8 ISO and standard cylinders Standard cylinders DNU/DNUL to ISO 6431, accessories Dimensions Foot mounting HN (2 feet and 4 mounting screws) Mounting attachments Flange mounting FN (1 flange and 4 mounting screws) Trunnion mounting kit ZNU for trunnion support LNZ (1 trunnion and 4 mounting screws) The kit can be attached to the cylinder profile barrel at any position. AB AH AO AT AU B1 C2 C3 E FB MF R SA TD TF TL TM TR UF UW US W XA ZF e /04 Subject to change Products 2001 Festo AG & Co. -125
9 Standard cylinders DNU/DNUL to ISO 6431, accessories Dimensions ISO and standard cylinders Mounting attachments Swivel flange SN for clevis foot LN/LSN (1 flange with pivot pin and 4 mounting screws) Spherical swivel flange SSN (1 flange and 4 mounting screws) + = plus stroke length CB CD CN EP EX FL L ML MR MS UB XC Festo AG & Co. Products 2001 Subject to change 01/08
10 ISO and standard cylinders Standard cylinders DNU/DNUL to ISO 6431, accessories Four-position cylinder For connecting two cylinders DNU with identical to a 3 or 4-position cylinder Adapter kit DPNN Cylinders must be ordered separately. A 3 or 4-position cylinder consists of two separate cylinders whose piston rods advance in opposing directions. This means that depending upon the actuation and stroke pattern, this type of cylinder can assume up to four positions. In each case the cylinder is driven precisely against a stop. Note that when one end of the piston rod is fixed, the cylinder barrel executes the movement. The cylinder must be connected with flexible line connections. To achieve 3 positions Two DNU cylinders of identical stroke length must be connected together. To achieve 4 positions Two DNU cylinders of different stroke lengths must be connected together. Max. overall stroke length 1000 mm + = plus stroke length F1 ZJ Weight Material Flange: die cast alumin ium; threaded studs, hex nuts: steel /04 Subject to change Products 2001 Festo AG & Co. -127
Standard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
Short-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
Flat cylinders EZH/DZF/DZH
Flat cylinders EZH/DZF/DZH Extremely flat design Protected against torsion thanks to special piston shape Compact assembly with block mounting Wide variety of mounting options 2017/10 Subject to change
Standard cylinders DNCB, ISO 15552
Standard cylinders DNCB, ISO 15552 Features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290)
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
Cylinders DSBG to ISO 15552
Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
AIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
Standard cylinders DSBG, to ISO 15552
Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless
Aluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
Compact cylinders ADVUL
Piston rod secured against rotation by means of guide rods and yoke plate Profile slots for proximity sensors Extensive range of accessories 2016/03 Subject to change Internet: www.festo.com/catalog/...
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
Multi-position cylinders/adapter kits
Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
Standard cylinders DNC-C180, to ISO 15552
Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and
VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
Linear drive units DGO
Features General information Double-acting Magnetically coupled without mechanical connections Piston chamber and slide are pressure tight Pressure tight and leak-free system Dirt and dust cannot enter
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
Clamping-unit cylinders, standard port pattern
Key features At a glance Clamping units are generally used for the friction locking of longitudinally variable rods at any position. The attachment of a clamping unit to a pneumatic cylinder allows the
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
Tandem/high-force cylinders
Tandem/high-force cylinders Tandem/high-force cylinders Product range overview Function Version Type Piston Stroke Position sensing Piston rod With male thread A Doubleacting Tandem cylinders DNCT 32,
Standard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance Design Easy to clean Easy to mount Flexible DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1
Our policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
Our policy is one of continued research and development. We therefore reserve the right 1/98 N
ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:
Semi-rotary drives DRQ
Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree
Large Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
Tie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
LPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
Standard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
Standard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
Tie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
XG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
Compact cylinders CDC, ISO 21287, Clean Design
Key features Design Easy to clean Easy to assemble Versatile With the CDC (Clean Design Compact) cylinder series, the ADN modular system has been expanded to include an easy to clean compact cylinder variant
Linear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
M/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
Twin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
Cartridge cylinders EGZ
Peripherals overview and type codes 7 Installation without mounting attachments Minimal installation space required 4 3 2 1 Mounting attachments and accessories Description 1 Swivel mounting WBN 2 Flange
LPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane
Profile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
TELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
TECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
Sizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
Compact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap
Tube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table
Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston
Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
CYLINDERS. Moving more than air
CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders
Stainless steel cylinders
Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/10 Subject to change Internet: www.festo.com/catalog/...
Round cylinders DSNU/DSNUP/DSN/ESNU/ESN
Round cylinders DSNU/DSNUP/DSN/ESNU/ESN Round cylinders DSNU/DSNUP/DSN/ESNU/ESN Key features At a glance DSNU-8 63 DSNU-8 25 Stainless steel piston rod Good running performance and long service Piston
PRA/182000, PRA/182000/M
Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and
AIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
Stainless Steel Cylinders Acid and Corrosion Resistant
Stainless Steel Cylinders Acid and Corrosion Resistant Subject to change 133 Stainless Steel Cylinders Contents Stainless Steel Double-Acting Cylinders per ISO 6432 Bores 12 to 25 mm Type CRDSNU... 137
Compact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
Round Cylinders DSNU, Double-acting Inch Series
Round Cylinders DSNU, Double-acting Inch Series Piston 5/16 to 2-1/2 Stroke lengths up to 20 Double-acting Meets the highest requirements for running characteristics, service life and load carrying ability
Strokes (mm) N/en
IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated
Available: Cylinders till july 2000 Spares till july /98 N
Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line
STANDARDISED MOUNTINGS
STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
Standard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NF E 49 003.1 and UNI 10290) The standard cylinder is used
PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting
> > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance
RM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
Round cylinders DSNU/ESNU
Round cylinders DSNU/ESNU Reacts quickly thanks to minimal break-away force Meets the highest requirements for running characteristics, service life and load carrying ability Extensive range of accessories
Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
Flat Cylinders DZF - Inch Series Overview
Flat Cylinders DZF - Inch Series Overview Non-rotating oval piston Piston 1/2 to 2-1/2 Standard strokes up to 12, variable strokes up to 13 Double-acting Moment capacity up to 13.3 lbf-in Male or female
Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
Stainless steel cylinders
Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/12 Subject to change Internet: www.festo.com/catalogue/...
ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) SER SES Series 435 Type C-AS C-AS/DM GENERAL Detection
DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE METRIC AIR CYLINDER
METRIC AIR CYLINDER WITH STAINLESS STEEL PISTON ROD, ALUMINIUM CYLINDER TUBE AND WITHOUT MAGNETIC PISTON THIS STANDARD REFERS TO THE DIMENSIONS REQUIRED FOR INTERCHANGEABILITY FOR SINGLE ROD, DOUBLE ACTING
Round cylinders DSNU/ESNU
Round cylinders DSNU/ESNU q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting
P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard
Hinge cylinders DW Key features
Key features At a glance Hinge cylinder for clamping components during the welding process Easy assembly thanks to swivel bearing on the bearing cap Integrated flow control Integrated end-position cushioning
Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
Cylinders ISO Bores from 32 to 125 mm
Cylinders ISO 5552 ores from 32 to 25 mm Double acting Standard executions Version Profile Tube Symbol Type STANDARD MAGNETIC AMA AMT For the magnetic reed switches type ASV and ASC see from page.0.. For
ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) GENERAL Detection Equipped or not for magnetic position
Series 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
Hinge cylinders DFAW
Key features At a glance Hinge cylinder for clamping components during the welding process Sintered bronze bushes as lowfriction bearing material on rod clevis and swivel bearing Clamping unit: With piston