EUROMOD NV 0/00 www.think-media.be Accessories for medium voltage power cables Terminations Cold-shrinkable Silicone kv - kv - 6 kv Catalogue 0/00
TERMINATIONS TABE OF CONTENTS COD-SHRINKABE SIICONE TERMINATIONS INDOOR TERMINATIONS, ITK... - OUTDOOR TERMINATIONS, OTK... - SCREEN EARTHING DEVICE SEECTION GUIDE... -
INDOOR TERMINATIONS. ITK Up to 6 kv Application S A class I termination i.e. located - indoors in controlled environmental conditions and not subject to condensation. S To connect polymeric insulated cable to equipment. Design Indoor termination comprising :. A cable lug (not supplied in the standard kit).. Sealing mastic.. A silicone tube.. A silicone tube with sheds.. Stress relief material. 6. A conductive EPDM ring. Specifications and standards S Meets the requirements of CENEEC HD 69. S. S The ITK cold-shrinkable termination is certified by Germanischer loyd, license 78-99HH, for use within particular cable types, electrical ratings... Contact our local representative for details. 6 6 Fig. Fig. Voltage Strike Conductor sections Termination Um distance Fig. Al or Cu (mm ) type (kv) (mm) no. min. max. ITK ( ) 60 0 70 ITK 60 9 00 ITK 00 00 00 ITK ( ) 60 70 ITK 60 9 0 ITK 00 00 800 ITK 6 6 60 0 0 ( ) The ITK accepts larger cable sizes (up to 00 mm ) when installed without rubber sleeve. ( ) The ITK accepts larger cable sizes (up to 0 mm ) when installed without rubber sleeve. -
Ordering instructions The complete ITK termination kit comprises the following components : ITK up to ITK ITK 6 x Silicone tube* + = xitkw termination kit ** x Silicone tube* x Silicone tube with 6 sheds * Factory pre-assembled silicone tubes comprising stress relief and sealing mastic. ** Also comprises sealing mastic and installation instructions. Ordering formula ( ) xitkw From table W : Select the symbol corresponding to both the system voltage and the cable size in mm. Example : The copper tape ed cable is kv, 0 mm compact stranded aluminium. Order : x ITK termination. Table W Conductor sizes (mm ) System voltage Part numbers for kv Part numbers for kv Part numbers for 6 kv - - - 0-70 6 9-0 ( ) or ( ) or 6 8-0 ( ) or ( ) or - 00-00 ( ) or - 00-800 - 000-00 - - ( ) & ( ) please refer to the previous page. Notes :. The ITK & terminations are always supplied with a rubber adapting sleeve required for the installation.. The commercialised European standard cable lugs without cable stop hole (aluminium, copper or bi-metallic) can be used. 6 mm max. 0 mm min. 0 mm max. Cable lugs should be within the dimensions specified (not applicable for ITK and ITK ). In other cases, refer to our local representative. ( ) Important note : Specify the metallic cable (concentric wires, metallic tape,...) and select the necessary earthing devic e, refer to the selection guide. This device must be specified when ordering. -
OUTDOOR TERMINATIONS. OTK Up to 6 kv Application S A class III termination i.e. for use outdoors and exposed to prolonged sunshine and other weather conditions. S To connect polymeric insulated cable to equipment. 6 6 6 Design Outdoor termination comprising :. A cable lug (not supplied in the standard kit).. Sealing mastic.. Sheds which can be installed upwards or down.. A silicone tube with sheds.. A silicone tube. 6. Stress relief material. 7. A conductive EPDM ring. Specifications and standards Meets the requirements of CENEEC HD 69. S. 7 7 7 Fig. Fig. Fig. Voltage Strike Number Conductor sections Termination Um distance Fig. of Al or Cu (mm ) type (kv) (mm) no. sheds min. max. OTK ( ) 00 0 70 OTK 00 9 00 OTK 60 6 00 000 OTK 00 0 0 OTK 60 6 00 60 OTK 6 6 60 6 0 0 ( ) The OTK accepts larger cable sizes (up to 00 mm ) when installed without rubber sleeve. -
Ordering instructions The complete OTK termination kit comprises the following components : OTK OTK x Silicone tube with sheds* OTK + x Silicone tube* x Silicone tube with sheds = xotkw termination kit ** OTK 6 OTK OTK x Silicone tube* + x Silicone tube with 6 sheds * Factory pre-assembled silicone tubes comprising stress relief and sealing mastic. ** Also comprises sealing mastic and installation instructions. Ordering formula ( ) xotkw From table W : Select the symbol corresponding to both the system voltage and the cable size in mm. Example : The copper tape ed cable is kv, 0 mm compact stranded copper. Order: x OTK termination. Table W Conductor sizes (mm ) System voltage Part numbers for kv Part numbers for kv Part numbers for 6 kv 0-70 6 9-0 ( ) or 6 8-0 ( ) or - 00-00 ( ) or - 00-60 - 800-000 - - ( ) please refer to the previous page. Notes :. The OTK termination is always supplied with a rubber adapting sleeve required for the installation.. The commercialised European standard cable lugs without cable stop hole (aluminium, copper or bi-metallic) can be used. 6 mm max. 0 mm min. 0 mm max. Cable lugs should be within the dimensions specified (not applicable for OTK and OTK ) In other cases, refer to our local representative. ( ) Important note : Specify the metallic cable (concentric wires, metallic tape,...) and select the necessary earthing devic e, refer to the selection guide. This device must be specified when ordering. -
COD-SHRINKABE SIICONE TERMINATIONS SCREEN EARTHING DEVICE SEECTION GUIDE - Indoor and outdoor applications - Copper tape and fabric tape or extruded semi-conductive (NF C -0) Copper wire and fabric tape or extruded semi-conductive Aluminium or copper tubular (AUPE) or tape (C -) and extruded semi-conductive Cable type core insulation copper tape outer sheath round conductor graphite varnish fabric tape core insulation extruded semiconductive copper wire outer sheath round conductor graphite varnish fabric tape core insulation aluminium or copper tubular, laid longitudinally outer sheath round conductor extruded semiconductive aluminium or copper tape, laid longitudinally fabric tape fabric tape AUPE C - Conductor size (mm ) - - 6 kv applications - - 6 kv applications kv applications * Extruded semi-conductive or fabric tape Extruded semiconductive Fabric tape AUPE C - - KITMT+TSC - TSC KIT 0 KIT 0 0-0 KIT MT + TSC - TSC KIT 0 KIT 00-00 KIT MT + TSC - TSC KIT 0 KIT 6 60 KITMT+TSC - TSC KIT 00 KIT 60 800-00 KIT MT + TSC - TSC KIT 00 KIT 60 KIT MT TSC KIT contents. TINNED BRAID WITH SODER BOCK : braid section = mm, = 00 mm.. TINNED COPPER WIRE FOR EARTH BRAID CEATING : = 00 mm. RO OF SEAING MASTIC TSC. STRIP OF SEF- AMAGAMATING TAPE : =70mm ROOFSEMI- CONDUCTIVE TAPE ROOFSEMI- CONDUCTIVE TAPE. CEATING COARS. TINNED COPPER PATE : - KIT 0 : Dia. mm - KIT 00 : Dia. 0 mm. TINNED BRAID WITH SODER BOCK AND UG : Welded to the copper plate + tinned copper wire; braid section = mm, =00mm. CEATING COARS. TINNED COPPER PATE : - KIT 0 : Dia. 0 mm - KIT & KIT 6 : Dia. mm - KIT 60 : Dia. 0 mm. TINNED BRAID WITH SODER BOCK AND UG : Welded to the copper plate + tinned copper wire; braid section = mm, = 00 mm. RO OF SEAING MASTIC. ROOFSEMI- CONDUCTIVE TAPE * Refer to our local representative for other cable voltages. Example : An outdoor cold-shrinkable termination is required for a kv cable with a copper tape and an extruded semi-conductive. Order a KITMT+TSC earthing device. -