Nexans Network Solutions Div. Euromold
|
|
- Ethan Henderson
- 5 years ago
- Views:
Transcription
1 Catalogue 2012
2 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution. Euromold provides a complete range of accessories for underground cables: premoulded EPDM rubber connectors for cables and epoxy bushings for transformers and switchgear, as well as a large range of coldshrinkable terminations and joints from 12 to 42 kv. Euromold is also the manufacturer of electrical components for the high voltage accessories of the Nexans group. ISO 9001 Certificate Since 1992, Euromold s commitment to quality is demonstrated by its ISO 9001 certification. International standards All our products meet the International standards like CENELEC HD 629.1, CENELEC EN 50180, IEC 60137, IEC or country specifications. Official certificates, CESI, KEMA, ATEX prove the conformity of our products. Long duration tests of existing or new products are continuously performed in our test fields. Laboratory accreditation Since June 2000, Euromold s independent ELAB laboratory obtained the BELAC accreditation no.144-test conform with the European standards for laboratories ISO for electrical testing of low and medium voltage cable accessories according to the international standards EN 50393, IEC , IEC and HD 629. While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility can be accepted for any inaccuracy. Nexans Network Solutions N.V. - Div. Euromold reserves the right to alter or modify the characteristics of its products described in this catalogue as standards and technology evolve. 1
3 SEPARABLE CONNECTORS AND BUSHINGS INTERFACE B Table of contents LR - elbow connector TE - tee connector T1 - equipment bushing AR-1 - equipment bushing AR-2 - equipment bushing AR-8 - equipment bushing SFR-P - equipment bushing Accessories Possible arrangements Interface B Dimensions according to European CENELEC EN and (in mm). Dia. 56 ±0.2 Dia. 46 ±0.2 Dia. for pin min 90 ± min Dia. 70 ±
4 Connecting possibilities BUSHINGS / ACCESSORIES CONNECTION CONNECTORS / ACCESSORIES Equipment interface dead-ending of equipment (K)(M)DR Dead-end receptacle (K)(M)T1 Equipment bushing (K)(M)AR-1 Equipment bushing one cable to equipment (K)(M)LR/G Elbow connector (K)(M)AR-2 Equipment bushing (K)(M)AR-8 Equipment bushing (K)(M)TE/G Tee connector (K)SFR-P Equipment bushing two cables to equipment (K)(M)SOP Stand-off plug cable isolation tap-off 630/250A (K)RTPA Reducing tap plug GP Earthing plug cable earthing in-line junction (K)(M)CP-SC Connecting plug 04/2012 Nexans Power Accessories Germany GmbH Ferdinand-Porsche-Str Hof/Saale Tel.: kundenzentrum.hof@nexans.com 3
5 LR INTERFACE B ELBOW CONNECTOR Application Separable elbow connector (plug-in type) designed to connect polymeric insulated cable to equipment (transformers, switchgear, motors...). Technical characteristics The thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel. Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory. Up to 36 kv - A 6/10 (12) kv 6.35/11 (12) kv 8.7/15 (17.5) kv 12/20 (24) kv 12.7/22 (24) kv 18/30 (36) kv Design Separable connector comprising: 1. Conductive EPDM insert. 2. Conductive EPDM jacket. 3. Insulating EPDM layer moulded between the insert and the jacket. 4. Type B - A interface as described by CENELEC EN and Conductor connector. 6. Cable reducer. 7. Earthing lead. The screen break design enables cable outer sheath testing without removing or dismantling the connector. 365 mm mm Specifications and standards The separable connector LR meets the requirements of CENELEC HD Separable connector type Voltage Um (kv) Current Ir (A) Conductor sizes (mm 2 ) min max LR/G KLR/G MLR/G
6 Kit contents The complete (K)(M)LR/G elbow connector kit comprises the following components: The kit also comprises lubricant, wipers, installation instructions and crimp chart. (K)(M)LR/G-W-X connector kit Connector housing (K)(M)BLR/G Pin contact + hex. key LRF Conductor contact LRC-X Bail restraint BA Cable reducer 411CA-W Select the part number which gives the best centring to the cable core insulation diameter and substitute X using table X, according to the conductor size and type. Add a 'K' for use up to 24 kv and add an 'M' for use up to 36 kv. Table W Ordering part number LR/G-11-X LR/G-15-X LR/G-19-X LR/G-22-X LR/G-25-X LR/G-27-X Dia. over core insulation (mm) min max Table X Conductor sizes (mm²) Aluminium Copper DIN hexagonal Deep indent DIN hexagonal Example: The copper wire screened cable is 12 kv, 150 mm 2 stranded copper with a diameter over core insulation of 23.5 mm. Order a LR/G (K)M elbow connector kit (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M KM (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M-11-2 For use with copper tape screened cables. Order: Kit MT. For use with Alupe or C cables. Please contact our representative. For use with fabric tape (graphite) screened cables. Order additional semi-conductive tape (type TSC). For use with other cable types. Please contact our representative. For applications outdoors and in humid climate. Order: +MWS. Components can be ordered individually. Nexans Power Accessories Germany GmbH Ferdinand-Porsche-Str Hof/Saale Tel.: kundenzentrum.hof@nexans.com 5
7 Application Separable tee connector (plugin type) designed to connect polymeric insulated cable to equipment (transformers, switchgear, motors...). Technical characteristics The thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel. Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory. TE INTERFACE B TEE CONNECTOR Up to 36 kv - A 6/10 (12) kv 6.35/11 (12) kv 8.7/15 (17.5) kv 12/20 (24) kv 12.7/22 (24) kv 18/30 (36) kv Design Separable connector comprising: 1. Conductive EPDM insert. 2. Conductive EPDM jacket. 3. Insulating EPDM layer moulded between the insert and the jacket. 4. Type B - A interface as described by CENELEC EN and Conductor connector. 6. Basic insulating plug (with VD point). 7. Cable reducer. 8. Conductive rubber cap. 9. Clamping pin contact. 10. Bail restraint. 11. Earthing lead. 390 mm mm 220 mm The screen break design enables cable outer sheath testing without removing or dismantling the connector. 11 Specifications and standards The separable connector TE meets the requirements of CENELEC HD Separable connector type Voltage Um (kv) Current Ir (A) Conductor sizes (mm 2 ) min max TE/G KTE/G MTE/G
8 Kit contents The complete (K)(M)TE/G elbow connector kit comprises the following components: The kit also comprises lubricant, wipers, installation instructions and crimp chart. (K)(M)TE/G-W-X connector kit Connector housing (K)(M)BT/G Clamping pin contact TEF Conductor contact TEC-X Basic insulating plug + rubber cap (K)(M)BIPA Bail restraint T-BA Cable reducer 411CA-W Select the part number which gives the best centring to the cable core insulation diameter and substitute X using table X, according to the conductor size and type. Add a 'K' for use up to 24 kv and add an 'M' for use up to 36 kv. Table W Ordering part number TE/G-11-X TE/G-15-X TE/G-19-X TE/G-22-X TE/G-25-X TE/G-27-X Dia. over core insulation (mm) min max Table X Example: The copper wire screened cable is 24 kv, 240 mm 2 stranded aluminium with a diameter over core insulation of 32.1 mm. Order 3 x KTE/G (K)M-12-2 tee connector kit. Conductor sizes (mm²) Aluminium Copper DIN hexagonal Deep indent DIN hexagonal (K)M (K)M KM (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M (K)M-11-2 For use with copper tape screened cables. Order: Kit MT. For use with Alupe or C cables. Please contact our representative. For use with fabric tape (graphite) screened cables. Order additional semi-conductive tape (type TSC). For use with other cable types. Please contact our representative. For applications outdoors and in humid climate. Order: +MWS. Components can be ordered individually. Nexans Power Accessories Germany GmbH Ferdinand-Porsche-Str Hof/Saale Tel.: kundenzentrum.hof@nexans.com 7
9 T1 /AR-1 /AR-2 INTERFACE B EQUIPMENT BUSHINGS Application For use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors... Technical characteristics Each bushing is tested for AC withstand and partial discharge prior to leaving the factory. Up to 36 kv - A 6/10 (12) kv 6.35/11 (12) kv 8.7/15 (17.5) kv 12/20 (24) kv 12.7/22 (24) kv 18/30 (36) kv Specifications and standards The plug-in type equipment bushings are moulded epoxy insulated parts and meet the requirements of IEC The (K)(M)T1 also meets CENELEC EN C To order the equipment bushing, specify the type. The bushings are supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering. E.g. KAR-1/J. Minimum oil level: - 12 kv: 40 mm - 24 kv: 50 mm - 36 kv: 75 mm Dia. H B A E Dia. 70 Dia. F Dia. G D In mm. Equipment bushing type Voltage Ur (kv) Current Ir (A) Dimensions (mm) A B C D E Dia. F Dia. G Dia. H T1 KT1 MT1 AR-1 KAR-1 MAR-1 AR-2 KAR-2 MAR M12 M12 M12 M12 M12 M12 M16 M16 M
10 AR-2/GS Bushing AR-2/J Bushing FIXINGS FOR EQUIPMENT BUSHINGS AR-1/J and T1/J Bushings bushing interface fixing studs bushing interface fixing studs fixing flange fixing flange B DIN NF C claw clamp F DIN stud clamp E DIN stud clamp equipment sealing gasket equipment sealing gasket equipment connection equipment connection tabs for the bail restraint tabs for the bail restraint earth plate earth jumper earth jumper Bushing clamping kit To order the bushing clamping kit, according to NFC standards, simply specify KBCNF- (for bushing type AR-2). Contents: - 4 x claw clamp NF - 1 x sealing gasket. Bushing clamping kit To order the bushing clamping kit, simply specify: KBCDS- B. Contents: - 1 x fixing flange - 6 x stud clamp F - 1 x sealing gasket. Bushing clamping kit To order the bushing clamping kit, according to DIN standards, simply specify KBCD-B. Contents: - 1 x fixing flange B - 6 x stud clamp E - 1 x sealing gasket. Fixing dimensions standards NF C French standards. Fixing dimensions Fixing dimensions standards DIN German standards. M10 or M12 M10 M10 50 to fixing studs Dia. 105 Dia fixing studs Dia. 105 Dia fixing studs Dia. 90 Dia. 140 In mm. Nexans Power Accessories Germany GmbH Ferdinand-Porsche-Str Hof/Saale Tel.: kundenzentrum.hof@nexans.com 9
11 Application For use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors... Technical characteristics Each bushing is tested for AC withstand and partial discharge prior to leaving the factory. AR-8 INTERFACE B EQUIPMENT BUSHING Up to 36 kv A 6/10 (12) kv 6,35/11 (12) kv 8,7/15 (17,5) kv 12/20 (24) kv 12,7/22 (24) kv 18/30 (36) kv Specifications and standards The plug-in type equipment bushings AR-8 are moulded epoxy insulated parts and meet the requirements of CENELEC EN and IEC To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper (/J). E.g. MAR-8/J. Minimum oil level: - 12 kv: 40 mm - 24 kv: 50 mm - 36 kv: 75 mm Dia M10 Dia. 74 Dia. 110 In mm. Equipment bushing type Voltage Ur (kv) Current Ir (A) AR-8 KAR-8 MAR
12 AR-8/J Bushing bushing interface 4 x fixing stud M10 FIXINGS FOR EQUIPMENT BUSHINGS Bushing clamping kit To order the bushing clamping kit, according to DIN standards, simply specify: KBCD-200. Contents: - 1 x fixing flange A - 4 x stud clamp E - 1 x sealing gasket. A DIN fixing flange E DIN stud clamp equipment sealing gasket equipment connection Fixing dimensions standards DIN German standards. tabs for the bail restraint M earth jumper 4 fixing studs Dia. 78 Dia. 123 In mm. Nexans Power Accessories Germany GmbH Ferdinand-Porsche-Str Hof/Saale Tel.: kundenzentrum.hof@nexans.com 11
13 Application For use in equipment insulated with SF 6 gas. Technical characteristics Each bushing is tested for AC withstand and partial discharge prior to leaving the factory. SFR-P INTERFACE B EQUIPMENT BUSHING Up to 24 kv - A 6/10 (12) kv 6.35/11 (12) kv 8.7/15 (17.5) kv 12/20 (24) kv 12.7/22 (24) kv Design The equipment bushing is a moulded epoxy insulated part with a connector interface in accordance with CENELEC EN The SFR-P bushing has a shank outside this standard, adapted for use in SF 6 gas. Dia Specifications and standards The plug-in type equipment bushing SFR-P meets the requirements of CENELEC EN and IEC To order the equipment bushing, simply specify the type. 95 Dia. 25 Dia. 70 Dia. 109 M12 In mm. Equipment bushing type SFR-P KSFR-P Voltage Ur (kv) Current Ir (A)
14 FIXINGS FOR EQUIPMENT BUSHINGS SFR-P Bushing for gas insulated switchgear UNMOUNTED 60 earth connection M M6 Dia Dia Dia. 4 equipment MOUNTED 97.5 Dia. 100 bail tab sealing O-ring gasket 6 fixing screws M6 equipment connection earth connection M4 In mm. Nexans Power Accessories Germany GmbH Ferdinand-Porsche-Str Hof/Saale Tel.: kundenzentrum.hof@nexans.com 13
15 ACCESSORIES INTERFACE B Application For use with connectors and bushings with an interface B as described by CENELEC EN and Technical characteristics All these products, except the earthing plug, are tested for AC withstand and partial discharge prior to leaving the factory. Up to 24 kv 6/10 (12) kv 6.35/11 (12) kv 8.7/15 (17.5) kv 12/20 (24) kv 12.7/22 (24) kv 18/30 (36) kv DR Dead-end receptacle Fits over a bushing with a type B interface to provide 'deadend' facility. Is used with a BA restraint bail. Order DR for 12 kv, KDR for 24 kv or MDR for 36 kv applications. Can be supplied with integral earth lead: add -/G. SOP Stand-off plug Is designed to support and 'dead-end' connectors with a type B interface when removed from equipment. Order SOP for 12 kv, KSOP for 24 kv or MSOP for 36 kv applications. GP Earthing plug Is designed to support and earth connectors with a type B interface when removed from equipment. Order GP for 12 kv, 24 or 36 kv applications
16 BIPA Basic insulating plug Acts as a tightening nut for the TE tee connector kit. The plug contains a voltage detection point. The conductive rubber protection cap is included. Order BIPA for 12 kv, KBIPA for 24 kv or MBIPA for 36 kv applications. CP-SC Connecting plug For connecting a TE and one or more 430TB, TB or 440TB connectors, thus creating a multiple cable connection to equipment. Order CP-SC for 12 kv, KCP-SC for 24 kv or MCP-SC for 36 kv applications. RTPA Reducing tap plug Provides a type A interface to a TE connector. A 'C' spanner, 600SW, is used to tighten the reducing tap plug on to its mating part. Order RTPA for 12 kv or KRTPA for 24 kv applications. Order 600SW for the 'C' spanner. Kit MT Earthing kit for copper tape screened cables Contains a tinned copper braid (25 mm² - L=500 mm), a tinned copper wire for cleating and water sealing mastic. Order Kit MT for 12 kv, 24 kv or 36 kv applications. Nexans Power Accessories Germany GmbH Ferdinand-Porsche-Str Hof/Saale Tel.: kundenzentrum.hof@nexans.com 15
17 POSSIBLE ARRANGEMENTS INTERFACE B TE/G Single cable arrangement. Order TE/G for 12 kv, KTE/G for 24 kv or MTE/G for 36 kv applications. TE/G-P2 Dual cable arrangement. Order TE/G-P2 for 12 kv, KTE/G-P2 for 24 kv or MTE/G-P2 for 36 kv applications TCS clamping screw basic insulating plug connecting plug basic insulating plug TE/G-P4 Single cable arrangement with tap-off. Order TE/G-P4 for 12 kv or KTE/G-P4 for 24 kv applications. 475 reducing tap plug type A separable connector In mm
18 Connector on stand-off plug Order SOP for 12 kv, KSOP for 24 kv or MSOP for 36 kv applications. Connector on earthing plug Order GP for 12 kv, 24 kv and 36 kv applications. stand-off plug basic insulating plug basic insulating plug earthing plug Cable and equipment testing 600 TR test rod insulating shroud 110 In mm. Nexans Power Accessories Germany GmbH Ferdinand-Porsche-Str Hof/Saale Tel.:
19 NOTES
20 Nexans Power Accessories Germany GmbH Ferdinand-Porsche-Str Hof/Saale Tel.:
21 20
22 Additional catalogue information on power cable accessories is available by contacting us at the address below: Distributed by: Nexans Power Accessories Germany GmbH Ferdinand-Porsche-Str Hof/Saale Tel.: /2012 Catalogue also available on CD-ROM
a Nexans company Catalogue 2012
a Nexans company Catalogue 2012 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated
More informationa Nexans company Catalogue 2006
a Nexans company Catalogue 2006 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
More informationNexans Network Solutions Div. Euromold
a Nexans company Catalogue 2011 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated
More informationNexans Network Solutions Div. Euromold
Catalogue 0 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for
More informationa Nexans company Catalogue 2007
a Nexans company Catalogue 2007 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
More informationTHORNE & DERRICK UK TEL FAX TEL FAX
a Nexans company Catalogue 2006 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
More informationTHORNE & DERRICK UK TEL FAX TEL FAX
WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK a Nexans company Catalogue 2006 EUROMOLD COMPANY PRESENTATION
More informationa Nexans company Medium voltage symmetrical separable connectors - Interface C -
a Nexans company Medium voltage symmetrical separable connectors - Interface C - Catalogue 2011 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised
More informationa Nexans company Catalogue 2011
a Nexans company Catalogue 2011 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
More informationa Nexans company Catalogue 2009
a Nexans company Catalogue 2009 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
More informationa Nexans company Catalogue 2015
a Nexans company Catalogue 05 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated
More informationa Nexans company Catalogue 2009
a Nexans company Catalogue 2009 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
More informationa Nexans company Catalogue 2007
a Nexans company Catalogue 2007 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
More informationa Nexans company Catalogue 2009
a Nexans company Catalogue 009 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium voltage
More informationINTERFACE C MEDIUM VOLTAGE SYMMETRICAL SEPARABLE CONNECTORS CATALOGUE 2017
INTERFACE C MEDIUM VOLTAGE SYMMETRICAL SEPARABLE CONNECTORS CATALOGUE 2017 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer
More informationINTERFACE A MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017
INTERFACE A MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 07 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Nexans is the leading European specialised designer, manufacturer
More informationINTERFACE F MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017
INTERFACE F MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer,
More informationNexans Network Solutions Div. Euromold
a Nexans company Catalogue 2011 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated
More informationa Nexans company Catalogue 2008
a Nexans company Catalogue 008 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium voltage
More informationINTERFACE E - 5/8" MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017
INTERFACE E - 5/8" MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer,
More informationa Nexans company Catalogue 2015
a Nexans company Catalogue 2015 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated
More informationPower cables accessories for use in potentially explosive atmospheres
Power cables accessories for use in potentially explosive atmospheres Catalogue 2013 NEXANS POWER ACCESSORIES EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor
More informationNexans Network Solutions Div. Euromold
Catalogue 2012 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories
More informationACCESSORIES. Application For use with connectors and bushings with an interface C as described by CENELEC EN and
ACCESSORIES INTERFACE C Application For use with connectors and bushings with an interface C as described by CENELEC EN 50180 and 50181. Technical characteristics All these products, except the earthing
More informationa Nexans company Catalogue 2008
a Nexans company Catalogue 2008 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
More informationglobal leader in cables
Nexans, global leader in cables Total sales of 6 billion euros in 2010 The most complete range of cables and cabling systems Plants in 40 countries 23,700 employees worldwide Complete offers for every
More informationShielded surge arresters
Shielded surge arresters Nexans, worldwide leader for the cable industry Total sales of billion euros in 2009 The most complete range of cables and cabling systems Plants in 39 countries 22,700 employees
More informationHigh Voltage Accessories up to 72.5 kv
High Voltage Accessories up to 72.5 kv Technical instructions and application information The data given were determined diligently, but do not release our customers of the duty to carry out tests themselves
More information(K),(M)430TB/G Up to 36 kv
IS90722-ENG - 430TB/G-45 25 June 2009 - Revision 8A - Supersedes edition of 25 November 2008 Page 1 of 10 CAUTION : Read instructions thoroughly and completely prior to beginning installation. Installation
More informationa Nexans company Catalogue 2012
a Nexans company Catalogue 2012 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated
More information(K),(M),(P)489TB/G Up to 42 kv
IS91374-ENG - 489TB/G-45/S 22 October 2012 - Revision 1 - Supersedes edition of 4 May 2012 Page 1 of 9 CAUTION : Read instructions thoroughly and completely prior to beginning installation. Installation
More informationNexans WINDLINK connection system. Nexans Power Accessories Germany GmbH
Nexans WINDLINK connection system Nexans Power Accessies Germany GmbH Technical instructions and application infmation Reprinting, even partial, only with special allowance. The data given were determined
More informationpower cable accessories
power cable accessories kv up to 4 kv Completing the picture based on experience is the future nkt cables GmbH NKT was established in 89 as cable manufacturer. In 999 NKT A/S Denmark merged with Felten
More informationCold-shrinkable Silicone 12 kv - 24 kv - 36 kv
EUROMOD NV 0/00 www.think-media.be Accessories for medium voltage power cables Terminations Cold-shrinkable Silicone kv - kv - 6 kv Catalogue 0/00 TERMINATIONS TABE OF CONTENTS COD-SHRINKABE SIICONE TERMINATIONS
More informationIS94012-ENG - AFN February Revision 6 - Supersedes edition of 28 January and / or. 3 x Stress control mastic, type MFC (Hi-K)
IS94012-ENG - AFN 20-45 5 February 2013 - Revision 6 - Supersedes edition of 28 January 2013 Page 1 of 7 CAUTION: Read instructions thoroughly and completely prior to beginning installation. Installation
More informationINTRODUCTION. The plug-in connection on the cables and lightning arrestors, allows for easy installation and replacement.
INTRODUCTION The Power Systems 44 kv MiniSub TM is the most compact system at this voltage available. Utilizing a deadfront termination and lightning arrestor setup, it eliminates the line top or side
More informationCOOPER POWER SERIES. Screened Separable Connectors MN650023EN. Effective October 2016 Supersedes March 2012 (IS )
Screened Separable Connectors MN650023EN Effective October 2016 Supersedes March 2012 (IS550-60-1) COOPER POWER SERIES DTS1242 Deadbreak Bolted Tee Connector: Interface C for Single Core Cable with Copper
More informationTechnical Guarantees For Electrical Materials & Equipments 1 Technical Guarantees No. IDT_1600 22/0.4 KV Low Losses, 3 phase, Indoor Distribution Transformer 1600 KVA Rating No Description Unit Requirements
More informationCompleting the picture
HIGH VoltaGe cable accessories for 72 kv up to 170 kv Completing the picture based on experience is the future nkt cables GmbH nkt was established in 1891 as cable manufacturer. in 1999 nkt a/s denmark
More informationMedium Voltage. Joints & Terminations
57 - Cold Shrink Joints Supporting Core Radially shrinkable elastomeric splice Semi-conductive layer High permitivity insulation layer 6.6/11/(12) kv 3M QS1000 is a one-piece cold shrink joint body manufactured
More information1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 7 Transformer bushings, type GOB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical
More informationLoadbreak Elbows. 3 Loadbreak Elbows. 200 Amp 5-15 kv Industrial pg Loadbreak Elbows. 200 Amp 25 kv Industrial pg. 254.
3 Loadbreak Elbows 200 Amp 5-15 kv Industrial pg. 252 Loadbreak Elbows 200 Amp 25 kv Industrial pg. 254 Loadbreak Elbows 200 Amp Industrial pg. 255 Loadbreak Elbows Accessories 3 Loadbreak Elbows 3M 200
More informationCOOPER POWER SERIES. Screened Separable Connectors MN650024EN. Effective October 2016 Supersedes March 2012 (IS )
Screened Separable Connectors MN650024EN Effective October 2016 Supersedes March 2012 (IS550-61-1) COOPER POWER SERIES DTB1242 Deadbreak Bolted Companion Tee Connector: Interface C for Single Core Cable
More informationELASTIMOLD UNDERGROUND CABLE ACCESSORIES
ELASTIMOLD UNDERGROUND CABLE ACCESSORIES ELASTIMOLD FEATURES AND BENEFITS The Elastimold brand is recognised as the leading producer of premoulded cable accessory components worldwide. Utilising specially
More informationMV TERMINATIONS. INDOOR SINGLE CORE TERMINATION - ELTI-1C for polymeric cables - Slip-on termination - Modular type APPLICATION STANDARDS
MEDIUM VOLTAGE MV TERMINATIONS INDOOR SINGLE CORE TERMINATION - ELTI-1C APPLICATION Utilisation indoor. in boxes and compact switchgears. in terminal boxes located outdoor and subject to condensation.
More informationNexans Switzerland. Global expert in cables and cabling system. Cossonay Production Plant
P o w e r C a b l e A c c e s s o r i e s Global expert in cables and cabling system Formed from Alcatel Cables and Components, Nexans inherits 100 years professional experience in manufacturing cables
More informationH e a t s h r i n k P r o d u c t G u i d e
P o w e r P r o d u c t s H e a t s h r i n k P r o d u c t G u i d e Introduction HellermannTyton is a world leader in providing systems and solutions for heatshrink applications. HellermannTyton utilises
More informationIEC Separable Connectors 17.5 kv/24 kv, 630A
IEC Separable Connectors 17.5 kv/24 kv, 630A Front T-Body / Coupling (Rear) T-Body Connector Application The Chardon T-Body connectors are used to terminate polymeric cable to dead front apparatus such
More information1ZSE EN, REV. 4. Wall bushings type GSA-AA Technical guide
1ZSE 2750-112 EN, REV. 4 Wall bushings type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More informationPower cable accessories catalogue
Power cable accessories catalogue MV Terminations & MV Joints Excellence in Training Obtain an accreditation in a wide range of joints and terminations. Courses available in low voltage, medium voltage
More information1ZSE EN, REV. 7. Oil SF 6. bushings type GOEK Technical guide
1ZSE 2750-106 EN, REV. 7 Oil SF 6 bushings type GOEK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More information1ZSE en, Rev. 9. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 9 Transformer bushings, type GOB Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More informationIEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector
www.chardongroup.com IEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector Application Chardon Front T-Body / Coupling (Rear) T-Body connectors are fully
More informationTE S RAYCHEM RSTI-CC-58 SCREENED, SEPARABLE COUPLING SYSTEM
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. industry photo. This image and the one above should be different versions of the same photo
More information600 A 15 kv class T-OP II deadbreak connector
Deadbreak Apparatus Connectors CA650017EN Supersedes 600-12 February 2010 COOPER POWER SERIES 600 A 15 kv class T-OP II deadbreak connector General Eaton terminates high-voltage underground cable to transformers,
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More information3 TM Cold Applied Barrier Boot System
M Technical Information : Barrier Boot TM Cold Applied Barrier Boot System For rated voltages 6.5/11(12) kv and 8.7/15(17.5) kv 92-EE 717-1 Product Description The Cold Applied Barrier Boot System consist
More informationSeparable Connectors and Kits
Important Notice While Woer has made every effort to ensure the accuracy of the information in this catalog, Woer does not guarantee that it is errorless. Nor does Woer make any other warranty or guarantee
More information3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series
3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series For 3-Conductor Copper Tape Shield Cables without Ground Wires Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working
More informationLoadbreak Apparatus Connectors. 200 A 15 kv Class Loadbreak Elbow Connector with Optional Integral Jacket Seal GENERAL
Loadbreak Apparatus Connectors 200 A 15 kv Class Loadbreak Elbow Connector with Optional Integral Jacket Seal Electrical Apparatus 500-10-7 GENERAL The Cooper Power Systems Loadbreak Elbow Connector is
More informationEnergy Division. PCA Single Column Polymeric Surge Arrester
Energy Division PCA Single Column Polymeric Surge Arrester Bowthorpe EMP pioneered the development of the polymeric composite housed surge arrester in the early 1980 s and since 1986 has a proven service
More information200 A 15 kv class loadbreak elbow connector with optional integral jacket seal
Loadbreak Connectors Catalog Data CA650062EN Supersedes June 2015 COOPER POWER SERIES 200 A 15 kv class loadbreak elbow connector with optional integral jacket seal General Eaton s Cooper Power series
More information1ZSE en, Rev. 3. Wall bushings, type GSA-AA Technical guide
1ZSE 2750-112 en, Rev. 3 Wall bushings, type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More informationResin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide
1ZSC000563-AAC en, Rev. 2 Resin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
More informationResin Impregnated Paper Bushing, Oil to SF 6. , Type GSBK
1ZSC563-AAA en, Rev. 2 Resin Impregnated Paper Bushing, Oil to SF 6, Type GSBK Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
More informationLoadbreak Apparatus Connectors
Loadbreak Apparatus Connectors 200 A 25 kv Class POSI-BREAK Loadbreak Elbow Connector with Optional Integral Jacket Seal* Electrical Apparatus 500-29-7 general The POSI-BREAK Loadbreak Elbow Connector
More information(BUSINESS DAYS) 200A Separable Connectors
DATE October 12, 2018 PAGE 1/11 SUBJECT Cable Accessory Inventory Please refer to the following tables of Cable Accessory inventory which is available for immediate shipment from ABB s Byhalia distribution
More informationCellplux Plug-in Technology
simple, secure, quick to assemble solution for entire cross-section range only standard tool required unlimited shelf life type tested to CENELEC HD 629.1 D827 SAP-No. 206884 0313 Perfect connection Profit
More informationInstallation Instruction Heatshrink Termination For 3 Core Polymeric Cables 7.2kV to 36kV
Installation Instruction Heatshrink Termination For 3 Core Polymeric Cables 7.2kV to 36kV * PLEASE READ INSTRUCTIONS THOROUGHLY BEFORE PROCEEDING * INDOOR OUTDOOR Download free QR code scanning software
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More information200 A 25 kv and 28 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition
Loadbreak Connector CA650099EN Supersedes 500-28-7C November 2011 COOPER POWER SERIES 200 A 25 kv and 28 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition General Eaton
More informationINSTALLATION PRODUCTION TESTS
Deadbreak Apparatus Connectors 600 A 15/25 kv Class Bol-T Deadbreak Connector Electrical Apparatus 600-10 GENERAL The Cooper Power Systems 600 A, 15/25 kv Class Bol-T Deadbreak Connector is used to terminate
More information200 A 15 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition
Loadbreak Connectors Catalog Data CA650063EN Supersedes 500-10-7C November 2011 COOPER POWER SERIES 200 A 15 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition General
More information600 A 35 kv class BT-TAP deadbreak connector
Supersedes 600-55 July 2014 600 A 35 kv class BT-TAP deadbreak connector General Eaton's Cooper Power Systems 600 A 35 kv Class BT-TAP deadbreak connector is used to terminate high-voltage underground
More informationTransformer bushings, type GOH. Technical guide
Transformer bushings, type GOH Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical information required
More information200 A 25 and 28 kv class POSI-BREAK loadbreak elbow connector with optional integral jacket seal-canadian Edition
Loadbreak Connectors CA650101EN Supersedes 500-29-7C November 2011 COOPER POWER SERIES 200 A 25 and 28 kv class POSI-BREAK loadbreak elbow connector with optional integral jacket seal-canadian Edition
More informationCable category. B Multi-core cables for domestic/handheld equipment Rubber insulation PVC insulation TPE insulation 0.
Table 12-1: current rating Technical Tables T12 Current ratings basic table ÖLFLEX For cables with a nominal voltage of up to 1000 V and for heat-resistant cables at an ambient temperature of +30 C. You
More informationTransformer High Current Bushings Type CFPT & CFCT 36kV up to 40kA IEC
Transformer High Current Bushings Type CFPT & CFCT 36kV up to 40kA IEC 60137-2008 High current bushings for transformer Features Bushing Type CFPT version Porcelain Insulator Trench RIG technology for
More informationDeadbreak Apparatus. connectors. 600 A 15/25 kv Class GENERAL
Deadbreak Apparatus Connectors 600 A 15/25 kv Class BOL-T Deadbreak Connector Electrical Apparatus 600-30 GENERAL The Cooper Power Systems 600 A, 15/25 kv Class BOL-T Deadbreak Connector is used to terminate
More informationEthernet Buccaneer BUCCANEER DATA. bulgin
BUCCANEER FOR DATA bulgin Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains
More informationControl Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België
Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part
More informationMicafil transformer oil-sf 6 bushings GARIP / RTKG kv. Power and productivity for a better world TM ABB
Micafil transformer oil-sf 6 bushings GARIP / RTKG 72.5 55 kv Power and productivity for a better world TM ABB Design and accessories The design of the main RIP insulating body includes a solid, non-removable
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationKEVA 24 Cxx(c) Indoor voltage sensors for NEXANS Instructions for installation, use and maintenance
Medium Voltage Products KEVA 24 Cxx(c) Indoor voltage sensors for NEXANS Instructions for installation, use and maintenance 1. Operating conditions 2 2. Technical details 2 3. Instructions for installation
More information3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit
3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit With High-K Stress Relief For 3-Conductor Copper Tape Shield Cables with or without Ground Wires 7600-T-3RJS Series Instructions
More informationABG Cable Glands Installation Procedure
ABG Cable Glands Installation Procedure ABG Cable Gland Range Baseefa 16ATEX0004X IECEx BAS 16.0011X Installation, Operation and Maintenance Instructions Material: Brass/ Brass with Nickel plated and Stainless
More informationTIDALFLUX 2300 F Quick Start
Quick Start Electromagnetic flow sensor for partially filled pipes The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS
More informationELB ES. Product Installation Instructions
ELB-25-210-ES 200A 25kV Class Loadbreak Elbow with Integral Jacket Seal for Copper Tape (CT) and Jacketed Concentric Neutral (JCN) cables Product Installation Instructions Safety Instructions When installing
More informationOIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) kV to 550kV up to 5000A IEC
OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) 1800 24kV to 550kV up to 5000A IEC 60137-2008 Features If you need any transformer bushing proven in operation conditions around the world, Trench
More information25-kV Apparatus Bushings A Series (clamp-in) for Elbow to Air-Insulated Service 200 Amp and 600 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection 15 kv or 25 kv Separable Insulated Connector (elbow) Grounded Metal Equipment Plate Equipment Connection Power Cable Power Cable ELRIM Cycloaliphatic
More informationGas Insulated Switchgear
Gas Insulated Switchgear Your partner in energy solutions CG Electric Systems Hungary CG Electric Systems Hungary (previously known as Ganz Electric) has a history of over a 130 years as a high technology
More information3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination
3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working around energized electrical systems may
More informationELB ELB
ELB-35-600 ELB-35-610 600A T-Body Elbow Connectors for Copper Tape (CT), Jacketed Concentric Neutral (JCN), and Concentric Neutral (CN) cables up to 35kV class Safety Instructions When installing electrical
More informationENERGY. HYDROFIRM(T) EMV-FC S1BC4B-F 0,6/1 kv. Screened Cable for Drinking Water Application KTW/ACS
ENERGY HYDROFIRM(T) EMV-FC S1BC4B-F 0,6/1 kv Screened Cable for Drinking Water Application KTW/ACS Technical Data Trademark Type designation Specification Application HYDROFIRM(T) EMV-FC S1BC4B-F Design
More information1ZSC AAA EN, REV. 7. Transformer bushings type GSBK Technical guide
1ZSC563-AAA EN, REV. 7 Transformer bushings type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More informationTransformer bushings, type GSA-OA Technical guide
Transformer bushings, type GSA-OA Technical guide ZSE 2750- en, Rev. 5, 2005-05-5 This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to
More informationIt s time to get connected with
It s time to get connected with The essence of quality NEW See pag e6 PRATLEY products and P NUTS are distributed exclusively in the UK by: Cable Connectors Ltd Product Brochure Aluminium Alloy (Corrosion
More informationENERGIE - KABELGARNITUREN ACCESSOIRES POUR CÂBLES D ÉNERGIE
ENERGIE - KABELGARNITUREN ACCESSOIRES POUR CÂBLES D ÉNERGIE Katalog AMV-C Catalogue Steck-Endverschlüsse Prises de courant Interface C, 12 36 kv Legende Légende A Anzahl Lagen Nombre de couches B Bildreferenz
More informationInstallation Instructions
517 Lyons Ave, Irvington, NJ 07111 Phone: 973-371-1771 Fax: 973-371-4304 Installation Instructions Deadbreak Elbow Applicable Current Ratings 600A (Aluminum) 900A (Copper) Applicable Catalog Prefix 35kV
More information1ZSC AAA en, Rev. 6. Resin impregnated paper bushing, oil to SF 6., type GSBK Technical guide
1ZSC563-AAA en, Rev. 6 Resin impregnated paper bushing, oil to SF 6, type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover
More information