Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Profile cylinders Euromec, Series 68 Technical data
Profile cylinders Euromec, Series 68 Double-acting, magnetic piston, adjustable cushioning, 25 00 mm dia. Technical Data Standard (32 00 mm dia.) ISO 5552 (ISO 643, VDMA 24562) CNOMO / NFE 49-003- Working pressure, max. 0 bar (45 psi) Ambient temperature range -20 C to +70 C (-4 F to +58 F) Medium Compressed air ISO 8573-:200, class 6-4-3 or lower* Materials Piston rod Stainless steel (BS 303 S 3) Piston rod bushing Steel with a PVDF + PTFE bearing surface Cylinder body Anodized aluminum End covers Aluminium End cover screws Surface treated steel Wiper Polyurethane Piston 25 63 mm dia. polyamide, 80 00 mm dia. Aluminum Cushioning screws Brass Seals Nitrile rubber Nut Zinc plated steel Application area This cylinder series is suitable for use where large masses are to be moved or where the impact frequency is high: the automobile industry for welding, painting, handling sheet steel, pressing etc., the food industry where the shape of the cylinder assists in meeting hygiene regulations, the packaging industry where high frequency and long service life are required. * Particle size 5 µm, dew point 3 C, oil content mg/m³ Technical Information (for further information see chapter 5) Piston diameter [mm] 25 32 40 50 63 80 00 Theoretical piston force push stroke [N] 295 482 756 76 860 3000 4676 (lbf) (66.3) (08) (70) (264) (48) (674) (050) at 6 bar (87 psi) pull stroke [N] 227 45 636 990 680 278 4229 (lbf) (5) (93.3) (43) (223) (378) (6) (95) Cushioning length [mm],0,5 5,0 7,0 6,5 9,5 9,5 Cushioning energy¹) [Nm],0 4,8 9,0 5,0 27,0 54,0 88,0 (in.lbs) (8.85) (42.48) (79.66) (32.76) (238.97) (477.94) (788.86) Cylinder weight 0 mm stroke [kg] 0,27 0,45 0,76,0,70 2,50 3,70 (lbs) (0.595) (0.992) (.68) (2.43) (3.75) (5.5) (8.6) add. per 00 mm [kg] 0,8 0,20 0,29 0,45 0,49 0,78,00 (lbs) (0.397) (0.44) (0.639) (0.992) (.08) (.72) (2.2) For cushioning diagram, see general technical information of this catalogue
Profile cylinders Euromec, Series 68 Double-acting, magnetic piston, adjustable cushioning, 25 00 mm dia. Part no. Piston Ø 25 32 40 50 63 Piston rod thread M 0 x,25 M 0 x,25 M 2 x,25 M 6 x,5 M 6 x,5 Connection port G/8 G/8 G /4 G /4 G 3/8 Stroke 25 680202000 680302000 680402000 680502000 680602000 50 680205000 680305000 680405000 680505000 680605000 80 680208000 680308000 680408000 680508000 680608000 00 68020000 68030000 68040000 68050000 68060000 25 68022000 68032000 68042000 68052000 68062000 60 68026000 68036000 68046000 68056000 68066000 200 680220000 680320000 680420000 680520000 680620000 250 680225000 680325000 680425000 680525000 680625000 320 680332000 680432000 680532000 680632000 400 680340000 680440000 680540000 680640000 500 680350000 680450000 680550000 680650000 Optional Stroke ²) 680200000 680300000 680400000 680500000 680600000 Rec. max. stroke³) 500 500 600 600 600 Piston Ø 80 00 Piston rod thread M 20 x,5 M 20 x,5 Connection port G 3/8 G /2 Stroke 25 68080200 68002020 50 68080500 68005020 80 68080800 68008020 00 6808000 6800020 25 6808200 6802020 60 6808600 6806020 200 68082000 68020020 250 68082500 68025020 320 68083200 68032020 400 68084000 68040020 500 68085000 68050020 Optional Stroke ²) 68080000 68000020 Rec. max. stroke³) 700 700 ²) When ordering optional stroke the length of the stroke must always be given in mm, for example 680300000, stroke 85 mm. ³) Longer strokes on request. 2
Profile cylinders Euromec, Series 68 Double-acting, magnetic piston, adjustable cushioning, 25 00 mm dia. Accessories (to be ordered separately) Accesssory Type Piston dia. 25 32 40 50 Flange front or rear 3682002000 523000602 52300602 523200602 Angle brackets 3682202000 5230000502 523000502 5232000502 Male trunnion mounting 3682802000 3682803000 3682804000 3682805000 Pivoted mounting 3683802000 523086902 52386902 523286902 Rear clevis 3682902590 3682903590 3682904590 3682905590 Rear eye for "Bearing block with rod end bearing" 5230003432 523003432 5232003432 Rear eye with PTFE sintered bushings 82700289 82700290 8270029 Rear eye with rubber bushing 3683202000 3683203000 3683204000 3683205000 Hinge with PTFE sintered bushing and mounting screws 82700283 82700284 82700285 Rear eye with ball joint 3683602000 3683603000 3683604000 3683605000 Foot mounting 368230200 368230300 368230400 368230500 Piston dia. 63 80 00 Flange front or rear 523300602 523400602 523500602 Angle brackets 5233000502 5234000502 5235000502 Male trunnion mounting 3682806000 3682808000 368280000 Pivoted mounting 523386902 523486902 523586902 Rear clevis 3682906590 3682908590 368290590 Rear eye for "Bearing block with rod end bearing" 5233003432 5234003432 5235003432 Rear eye with PTFE sintered bushings 82700500 82700293 82700294 Rear eye with rubber bushing 3683206000 3683208000 368320000 Hinge with PTFE sintered bushing and 827020086 82700287 82700288 mounting screws Rear eye with ball joint 3683606000 3683608000 368360000 Foot mounting Piston dia. 25 32 40 50 Rod clevis 82222024 82222024 82222025 82222005 Rod clevis corrosion proof 3590502000 3590502000 3590504000 3590505000 Mounting plate 3670803000 3670803000 3670804000 3670805000 Ball eye rod end 82224003 82224003 82224004 82224005 Compensating coupling 826409002 826409002 826409003 826409004 Coupling piece 523086002 523086002 52386002 523286002 Piston dia. 63 80 00 Rod clevis 82222005 82222004 82222004 Rod clevis corrosion proof 3590505000 3590508000 3590508000 Mounting plate 3670805000 Ball eye rod end 82224005 82224006 82224006 Compensating coupling 826409004 826409005 826409005 Coupling piece 523286002 523486002 523486002 Piston dia. 25-00 Sensor with 2,5 m cable, Reed 27503230 Sensor with 2,5 m cable, PNP 275030 Sensor mounting for sensors Series ST8 (275) 2752000 Seal kit Piston dia. 25 32 40 50 63 80 00 Part no. 049035302 0490394303 0490394400 0490394508 0490394605 0490394702 049039488 3
Profile cylinders Euromec, Series 68 Double-acting, magnetic piston, adjustable cushioning, 25 00 mm dia. S* = Stroke Tolerance 25 50 mm dia. = +2/-0 63 00 mm dia. = +2,5/-0 Piston Ø B¹) e E P V AM BG min. CC EA EE KK MM g 8 25 25³) 37 5 6 22 7,5 20 40 G /8 M 0x,25 2 32 30 45 5 5 22 6 28 49 G /8 M 0x,25 2 40 35 50 7 9 24 6 33 58 G /4 M2x,25 6 50 40 62 7 24 32 6 3 69 G /4 M6x,5 20 63 45 73 8 24 32 6 38 84 G 3/8 M6x,5 20 80 45 92 2 30 40 6 38 04 G 3/8 M 20x,5 25 00 55 09 0 35 40 6 42 26 G /2 M 20x,5 25 Piston NV NV2²) PL RT TG VA VD VF WH ZB ZD Ø 25 0 7 9 M 5 27 ±0,2 4 6 24 98 74 ±0,4 32 0 7 4 M6 32,5 ±0,2 3,5 4 6 26 20 94 ±0,4 40 3 9 5 M6 38 ±0,2 3,5 4 6,5 30 35 05 ±0,4 50 7 24 4 M8 46,5 ±0,2 4 4 8 37 43 06 ±0,4 63 7 24 8 M8 56,5 ±0,2 4 4 8 37 58 2±0,4 80 22 30 7 M 0 72 ±0,2 4 4 0 46 74 28 ±0,8 00 22 30 2 M 0 89 ±0,2 4 4 0 5 89 38 ±0,8 ¹) There is no guide on the rear end cover of the 25 mm diameter cylinder. ²) The cylinder is supplied fitted with a nut as per ISO 4035, DIN 439. ³) This dimension does not correspond with 25 mm dia. cylinders, series 67. Other external dimensions are the same. 4
Profile cylinders Euromec, Series 68 Non-rotating piston rod, magnetic piston, adjustable cushioning, 32 63 mm dia. Technical Data for Euromec Splined (68-58) Standard (32 63 mm dia.) ISO 5552 (ISO 643, VDMA 24562) CNOMO / NFE 49-003- Working pressure, max. 0 bar (45 psi) Ambient temperature range 20 C to +70 C (-3 F to +58 F) Medium Compressed air ISO 8573-:200, class 6-4-3 or lower* Materials Piston rod Hard chromium plated steel Piston rod dowel Steel, black oxidized Piston rod bushing Steel with a PVDF + PTFE bearing surface Cylinder body Anodized aluminum End covers Aluminium End cover screws Surface treated steel Wiper Polyurethane Piston Aluminum Cushioning screw Brass Spline shaft Surface treated steel Spline sleeve Polyamide Nut Zinc plated steel Seals Nitrile rubber Application area This type is intended for applications where the piston rod movement must be secured against rotation. Note that the piston rod must be held securely in it s spanner flats when piston rod mountings are tightened so that the maximum permitted torque of the spline shaft is not exceeded. * Particle size 5 µm, dew point 3 C, oil content mg/m³ Technical information Piston diameter [mm] 32 40 50 63 Maximum permitted instantaneous [Nm] 0 5 30 30 (in.lbs) (88.5) (32.76) (265.52) (265.52) torque Mv continuous [Nm] 0,6 2 2 (in.lbs) (5.3) (8.85) (7.70) (7.70) Max. turning play [ ] ± ± ± ± Spanner size X see fig. below [mm] 8 0/-0,2 0 0/-0,2 4 0/-0,2 4 0/-0,2 Cylinder weight 0 mm stroke [kg] 0,45 0,76,0,70 (lbs) (0.992) (.68) (2.43) (3.75) add. per 00 mm [kg] 0,20 0,29 0,45 0,49 (lbs) (0.44) (0.639) (0.992) (.08) Part no. Piston Ø 32 40 50 63 Piston rod thread M 0 x,25 M 2 x,25 M 6 x,5 M 6 x,5 Connection port G/8 G /4 G /4 G 3/8 Stroke²) 25 685803020 685804020 685805020 685806020 50 685803050 685804050 685805050 685806050 80 685803080 685804080 685805080 685806080 00 68580300 68580400 68580500 68580600 25 68580320 68580420 68580520 68580620 60 68580360 68580460 68580560 68580660 200 685803200 685804200 685805200 685806200 250 685804250 685805250 685806250 320 685805320 685806320 400 685805400 685806400 500 685805500 685806500 Optional stroke¹) 685803000 685804000 685805000 685806000 Rec.max. stroke²) 500 750 990 990 ¹) When ordering optional stroke the length of the stroke must be given in mm, for example 685804000, stroke 85 mm. ²) Longer strokes available on request.
Profile cylinders Euromec, Series 68 Non-rotating piston rod, magnetic piston, adjustable cushioning, 32 63 mm dia. Cross section of piston rod thread X = See technical information above. 2
Profile cylinders Euromec, Series 68 Through piston rod, magnetic piston, adjustable cushioning, 25 00 mm dia. Technical Data for Euromec (68-5) Standard (32 00 mm dia.) ISO 5552 (ISO 643, VDMA 24562) CNOMO / NFE 49-003- Working pressure, max. 0 bar (45 psi) Ambient temperature range 20 C to +70 C (-3 F to +58 F) Medium Compressed air ISO 8573-:200, class 6-4-3 or lower* Materials Piston rod Stainless steel (BS 303 S 3) Piston rod bushing Steel with a PVDF + PTFE bearing surface Cylinder body Anodized aluminum End covers Aluminium End cover screws Surface treated steel Wiper Polyurethane Piston 25 63 mm dia. polyamide, 80 00 mm dia. Aluminum Cushioning screws Brass Seals Nitrile rubber Nuts Zinc plated steel Application area This cylinder series can be used if the force is to be transferred with a wire or chain and the ends can then be connected to both ends of the piston rod. The effective piston area for a through piston rod is equal on both sides which means that the tensile and compressive force are equal with equal pressure. * Particle size 5 µm, dew point 3 C, oil content mg/m³ Technical Information (for further information see chapter 5) Piston diameter [mm] 25 32 40 50 63 80 00 Theoretical piston force at 6 bar (87 psi) [N] 227 45 636 990 680 278 4229 (lbf) (5) (93.3) (43) (223) (378) (6) (95) Cushioning length [mm],0,5 5,0 7,0 6,5 9,5 9,5 Cushioning energy [Nm],0 4,8 9,0 5,0 27,0 54,0 88,0 (in.lbs) (8.85) (42.48) (79.66) (32.76) (238.97) (477.94) (788.86) Cylinder weight 0 mm stroke [kg] 0,35 0,52 0,88,30 2,00 3,00 4,30 (lbs) (0.772) (.5) (.94) (2.87) (4.4) (6.6) (9.48) add. per 00 mm [kg] 0,20 0,30 0,48 0,67 0,79,0,40 (lbs) (0.44) (0.66) (.06) (.48) (.74) (2.43) (3.09) Part no. Symbol Ordering example When ordering please state the series/piston diameter/stroke. Example: Euromec -5/32/300. Longer strokes than rec. max stroke (see standard) are available on request. S* = Stroke Dimensions (for other dimensions see the Euromec standard) Piston Ø AM VD WH ZM ZD 25 22 6 24 22 74 32 22 5 26 46 94 40 24 9 30 65 05 50 32 24 37 80 06 63 32 24 37 95 2 80 40 30 46 220 28 00 40 35 5 240 38
Profile cylinders Euromec, Series 68 Low pressure hydraulics, magnetic piston, 25 00 mm dia. Technical Data for Euromec (68-52) Standard (32 00 mm dia.) ISO 5552 (ISO 643, VDMA 24562) CNOMO / NFE 49-003- Working pressure, max. 0 bar (45 psi) Ambient temperature range 20 C to +70 C (-3 F to +58 F) Medium Fluid, see technical information below Dimensions, see standard cylinders Materials Piston rod Stainless steel (BS 303 S 3) Piston rod bushing Steel with a PVDF + PTFE bearing surface Cylinder body Anodized aluminum End covers Aluminium End cover screws Surface treated steel Wiper Polyurethane Piston 25 63 mm dia. polyamide, 80 00 mm dia. Aluminum Cushioning screw Brass Seals Nitrile rubber Nuts Zinc plated steel Application area This cylinder type is used when an even and/or very slow piston movement is required even if the load varies. A needle valve should be used between the reservoirs in the connection example. Technical Information (for further information see section 5) Symbol Connection example The recommended pressure medium for this type is hydraulic fluid. Bearing in mind pressure losses, the viscosity should not exceed 20 mm²/s (2.9 E) at operating temperature. A suitable hydraulic fluid is oil of the ATF-DEXRON type (Part no. 898200000) or oils with an aniline point of 93 C ±5. (99 F ±4) For other pressure mediums, please contact your nearest Bosch Rexroth office. Part no. Symbol Ordering example When ordering please state the series/piston diameter/stroke. Example: Euromec -52/32/300. Longer strokes than rec. max stroke (see standard) are available on request.
Profile cylinders Euromec, Series 68 High operating temperatures, <20 C(248 F), adjustable cushioning, 25 00 mm dia. Technical Data for Euromec (68-53) Standard (32 00 mm dia.) ISO 5552 (ISO 643, VDMA 24562) CNOMO / NFE 49-003- Working pressure, max. 0 bar (45 psi) Ambient temperature range 20 C to +20 C (-3 F to +-248 F) Medium Compressed air ISO 8573-:200, class 6-4-3 or lower* Dimensions, see standard cylinders Material Piston rod bushing Steel with a PVDF + PTFE bearing surface Cylinder body Anodized aluminum End covers Aluminium End cover screws Surface treated steel Wiper 25, 32 mm dia.: FPM rubber (viton) 40 00 mm dia.: PTFE Piston Aluminum Cushioning screw Brass Nut Zinc plated steel Seals FPM rubber (viton) Application area This type is suitable for use in hot zones, for example in the operation of furnace doors. Proximity position sensors cannot be used if magnets are not fitted in the piston. However, this can be obtained as a special, on request. * Particle size 5 µm, dew point 3 C, oil content mg/m³ Part no. Symbol Ordering example When ordering please state the series/piston diameter/stroke. Example: Euromec -53/32/300. Longer strokes than rec. max stroke (see standard) are available on request.
Profile cylinders Euromec, Series 68 With position holder, magnetic piston, adjustable cushioning, 32 00 mm dia. Technical Data for Euromec (68-54) Type, piston rod lock Normally closed (in brake position) Standard Mounting holes for position holder and Euromec et Euromec to VDMA 24562 and CNOMO/NFE 49-003 Working pressure max. 0 bar (45 psi) Release pressure min. 4 bar (58 psi) (position holder) Ambient temperature range -5 C to +70 C (+5 F to +58 F) Medium Compressed air ISO 8573-:200, class 6-4-3 or lower* Materials Housing Anodized aluminum Piston rod Stainless steel (BS 303 S 3) Piston rod bushing Steel with a PVDF + PTFE bearing surface Cylinder body Anodized aluminum End covers Aluminium End cover screws Surface treated steel Wiper Polyurethane Piston Ø 32 63 polyamide, Ø 80-00 aluminum Cushioning screws Brass Mounting screws Zinc plated steel Seals Nitrile rubber Nuts Zinc plated steel Application area The piston rod lock is used to secure the piston rod in any chosen position along the stroke. As a machine safeguard: locks securely when air is lost or in an emergency stop. Must not be used as a personnel safeguard. * Particle size 5 µm, dew point 3 C, oil content mg/m³ Technical information Piston diameter [mm] 32 40 50 63 80 00 Min. holding force at 0 bar for vented holder [N] 760 200 900 3000 5000 8000 (lbf) (7) (270) (427) (674) (20) (800) Cylinder weight 0 mm stroke [kg],25,76 2,9 4,5 8 3,2 (lbs) (2.76) (3.88) (6.39) (9.92) (7.6) (29.) add. per 00 mm [kg] 0,20 0,29 0,45 0,49 0,78,00 (lbs) (0.44) (0.639) (0.992) (.08) (.72) (2.2) Piston Ø Ø32 mm Ø40 mm Ø50 mm Ø63 mm Ø80 mm Ø00 mm Piston rod thread M 0x,25 M 2x,25 M 6x,5 M 6x,5 M 20x,5 M 20x,5 Connection port G/8 G/8 G /4 G /4 G 3/8 G 3/8 Optional stroke¹) 685403000 685404000 685405000 685406000 685408000 68540000 Part no. Symbol Ordering example When ordering please state the series/piston diameter/stroke. Example: Euromec -54/32/300. Longer strokes than rec. max stroke (see standard) are available on request
Profile cylinders Euromec, Series 68 With position holder, magnetic piston, adjustable cushioning, 32 00 mm dia. S* = Stroke Piston Ø A B C E e F L20 BG** EE RT TG WH ZD Tol. stroke 32 25 9 9 30 48 44 6 G /8 M 6 32,5 30 29 +2/ 0 40 25 2 9 35 53 44 6 G /8 M 6 38 32 230 +2/ 0 50 45 28 9 40 63 49 6 G /8 M8 46,5 4 25 +2/ 0 63 65 28 0 45 75 52 6 G /8 M8 56,5 4 286 +2,5/ 0 80 85 34 45 98 6,5 7 G /8 M 0 72 50 33 +2,5/ 0 00 220 37 3 55 8 68 7 G /8 M 0 89 53 358 +2,5/ 0 ** Thread depth. For other dimensions, see Euromec standard. Accessories and mountings (to be ordered separetely) Spare parts kit, see separate documentation. Subbases for control valve and wiper for the rear of the position holder for use without a cylinder Inductive sensor M2x with a connecting distance of 2 mm can be mounted in prepared holes. The sensor is activated when the disconnection pressure is 0 bar, i.e. the position holder is activated. 2
Profile cylinders Euromec, Series 68 Corrosive environments, magnetic piston, adjustable cushioning, 25 00 mm dia. Technical Data for Euromec Clean (68-59) Standard (32 00 mm dia.) ISO 5552 (ISO 643, VDMA 24562) CNOMO / NFE 49-003- Working pressure, max. 0 bar (45 psi) Ambient temperature range 20 C to +70 C (-3 F to +58 F) Medium Compressed air ISO 8573-:200, class 6-4-3 or lower* Dimensions, see standard cylinders Materials Piston rod Stainless steel (BS 303 S 3) Piston rod bushing Steel with a PVDF + PTFE bearing surface Cylinder body Anodized aluminum End covers Anodized aluminum End cover screws Stainless steel (BS 303 S 3) Wiper Polyurethane Piston 25 63 mm dia. polyamide, 80-00 mm dia. Aluminum Cushioning screw Stainless steel (BS 303 S 3) Seals Nitrile rubber Nut Stainless steel (BS 303 S3) Application area The strengthened corrosion protection makes this type of cylinder suitable for the food industry, animal food production, laundries, heating, water and sanitation plants, etc. In order to prevent dirt collecting in the mounting holes, hygienic plugs (8 pcs) in thermoplastic rubber can ordered for these, available on request. * Particle size 5 µm, dew point 3 C, oil content mg/m³ Part no. Symbol Ordering example When ordering please state the series/piston diameter/stroke. Example: Euromec -59/32/300. Longer strokes than rec max. stroke (see standard) are available on request.
Profile cylinders Euromec, Series 68 Accessories Flange front or rear ISO MF /MF 2, VDMA, NFE S* = Stroke Piston Ø Part no. E R JS 4 W FB H 3 MF TF JS 4 UF ZF Weight [kg] (lbs) 25 3682002000 40 26 4 ±,6 7 0 52 66 08 ±,3 0,2 (0.44) 32 523000602 50 32 6 ±,6 7 0 64 80 30 ±,3 0,3 (0.66) 40 52300602 55 36 20 ±,6 9 0 72 90 45 ±,3 0,4 (0.88) 50 523200602 65 45 25 ±,6 9 2 90 0 55 ±,3 0,5 (.) 63 523300602 75 50 25 ±2 9 2 00 25 70 ±,6,0 (2.2) 80 523400602 00 63 30 ±2 2 6 26 54 90 ±,6,7 (3.75) 00 523500602 20 75 35 ±2 4 6 50 80 205 ±,6 2,3 (5.07) Materials: Zinc plated steel. Supplied complete with mounting screws for attachment to the cylinder.
Angle brackets ISO MS, VDMA, NFE S* = Stroke Piston Ø Part no. E AB H 4 AH JS 5 A0 AT AU ±0,2 SA TR JS 4 XA Weight [kg] (lbs) 25 3682202000 40 7 25 8 4 22 8 ±,0 26 20 ±,3 0, (0.22) 32 5230000502 48 7 32 5 24 42 ±,25 32 44 ±,3 0, (0.22) 40 523000502 53 9 36 2 5 28 6 ±,25 36 63 ±,3 0,2 (0.44) 50 5232000502 63 9 45 3 5 32 70 ±,25 45 75 ±,3 0,3 (0.66) 63 5233000502 73 9 50 3 5 32 85 ±,6 50 90 ±,6 0,3 (0.66) 80 5234000502 98 2 63 9 6 4 20 ±,6 63 25 ±,6 0,6 (.32) 00 5235000502 5 4,5 7 9 6 4 220 ±,6 75 230 ±,6 0,7 (.54) Materials: Zinc plated steel. Supplied complete with mounting screws for attachment to the cylinder. The mountings are delivered in pairs.
Central male trunnion ISO MT4, VDMA, NFE Piston Ø Part no. TT TD e 9 TL h 4 TM h 4 TU UW Weight [kg] (lbs) 25 3682802000 5 0 50 72 65 0,2 (0.44) 32 3682803000 24 2 2 50 74 65 0,3 (0.66) 40 3682804000 24 6 6 63 95 75 0,5 (.) 50 3682805000 27 6 6 75 07 92 0,8 (.76) 63 3682806000 36 20 20 90 30 05,3 (2.87) 80 3682808000 36 20 20 0 50 28,7 (3.75) 00 368280000 48 25 25 32 82 45 3,2 (7.05) Materials: Nitro-carburized steel. Moveable, lubrication free, central male trunnion with axle pivots (the mounting can be assembled without dismantling the cylinder).
Pivoted mounting ISO MT5, MT6 S* = Stroke Piston Ø Part no. E max TD TL TM TT XH XL Weight e 9 [kg] (lbs) 25 3683802000 40 0 50 4 7 05 0,2 (0.44) 32 523086902 50 2 2 50 6 8 28 0,2 (0.44) 40 52386902 55 6 6 63 20 20 45 0,4 (0.88) 50 523286902 65 6 6 75 24 25 55 0,5 (.) 63 523386902 75 20 20 90 24 25 70,0 (2.2) 80 523486902 00 20 20 0 28 32 88,7 (3.75) 00 523586902 23 25 25 32 38 32 208 3 (6.6) Materials: Galvanized steel. This mounting is supplied complete with mounting screws for attachment to the cylinder. In contrast to the central male trunnion, the pivoted mounting enables a sensor to be mounted for sensing the end position of the cylinder. This mounting can be mounted with dowels on the same side as, or 90 to, the connection port. Note: When the mounting is mounted with dowels on the same side as the connection port, consideration must be given to the space required for the bearing brackets.
Bearing brackets Piston Ø Part no. A B B C D Ø d d2 F f H H2 N H 7 32 5230603402 32 5 46 7,5 3 2 6,6,2 30 5 6,8 40 5232603402 36 8 55 9 3 6 9 5,6 36 8 9 50 5232603402 36 8 55 9 3 6 9 5,6 36 8 9 63 5234603402 42 20 65 0 3 20 8,6 40 20 80 5234603402 42 20 65 0 3 20 8,6 40 20 00 5236603402 50 25 75 2,5 3,5 25 4 20 2 50 25 3 Supplied in pairs. Material: Galvanized steel with sintered bushing.
Rear clevis ISO, MP2, VDMA, NFE S* = Stroke Piston Ø Part no. E L CB H 4 CD H 9 FL ±0,2 MR UB h 4 XD ±,25 Weight [kg] (lbs) 32 82700289 48 4 26 0 22 45 42 0, (0.22) 40 523003402 53 6 28 2 25 3 52 60 0,2 (0.44) 50 5232003402 63 6 32 2 27 3 60 70 0,3 (0.66) 63 5233003402 73 20 40 6 32 7 70 90 0,4 (0.88) 80 5234003402 98 22 50 6 36 7 90 20 0,6 (.32) 00 5235003402 5 27 60 20 4 2 0 230 0,9 (.98) Material: Aluminum, with screws, without the pivot pin, with PTFE bushing. The mounting together with "Rear eye with PTFE bushing" (MP4) + pivot pin (523 X00 009) form a complete pivot mounting. Piston Ø Part no. E L CB H 4 CD e 8 FL ±0,2 MR UB h 4 VB XD Weight [kg] (lbs) 25 3682902590 40 4 8 0 20 9 36 4 8 ±,3 0, (0.22) 32 3682903590 47 2 26 0 22 45 50 42 ±,3 0, (0.22) 40 3682904590 54 5 28 2 25 3 52 57 60 ±,3 0,2 (0.44) 50 3682905590 65 5 32 2 27 3 60 65 70 ±0,3 0,2 (0.44) 63 3682906590 75 20 40 6 32 7 70 76 90 ±,6 0,4 (0.88) 80 3682908590 94 20 50 6 36 7 90 96 20 ±,6 0,5 (.) 00 368290590 2 25 60 20 4 2 0 7 230 ±,6 0,9 (.98) Material: Anodized aluminum. The mounting is delivered with a pivot pin, circlips and mounting screws in stainless steel. This mounting together with "Rear eye with PTFE bushing" (MP4) alternative "Rear eye with rubber bushing" form a complete pivot mounting.
Rear end cover clevis ISO MP0, VDMA, NFE S* = Stroke Piston Ø Part no. E CD CB H 4 UB d 2 FL ±0,2 L MR XD Weight [kg] (lbs) 32 5230003432 48 0 4 34 22,5 42 0, (0.22) 40 523003432 53 2 6 40 25 2 3 60 0,2 (0.44) 50 5232003432 63 6 2 45 27 4 8 70 0,3 (0.66) 63 5233003432 73 6 2 5 32 4 8 90 0,4 (0.88) 80 5234003432 98 20 25 65 36 6 22 20 0,6 (.32) 00 5235003432 5 20 25 75 4 6 22 230 0,9 (.98) Material: Grey cast iron.
Rear eye with rubber bushing ISO, NFE Piston Ø Part no. E L CD H 9 EW FL NR¹) XD Weight [kg] (lbs) 25 3683202000 40 4,5 0 7,5 20 2 8 ±,3 0, (0.22) 32 3683203000 46 6,5 0 25,5 22 4 42 ±,3 0, (0.22) 40 3683204000 55 7,5 2 27,0 25 9 60 ±,3 0, (0.22) 50 3683205000 62 8,5 2 3,0 27 9,5 70 ±,3 0,2 (0.44) 63 3683206000 80 2,5 6 39,5 32 26 90 ±,6 0,3 (0.66) 80 3683208000 94 24,5 6 49,5 36 27 20 ±,6 0,4 (0.88) 00 368320000 4 26,5 20 59,5 4 29 230 ±,6 0,7 (.54) Materials: Aluminum with a bronze bushing encapsulated in vulcanized rubber, lubrication-free. This mounting is supplied complete with mounting screws for attachment to the cylinder. ¹) This dimension exceeds the ISO standard.
Rear eye with PTFE bushing (MP4) ISO, VDMA, NFE S* = Stroke Piston Ø Part no. E L CD H 9 EW FL ±0,2 MR XD Weight [kg] (lbs) 32 82700283 48 4 0 26 0,2/ 0,6 22 42 ±,3 0, (0.22) 40 82700284 53 6 2 28 0,2/ 0,6 25 3 60 ±,3 0,2 (0.44) 50 82700285 63 6 2 32 0,2/ 0,6 27 3 70 ±,3 0,2 (0.44) 63 827020086 73 20 6 40 0,2/ 0,6 32 7 90 ±,6 0,4 (0.88) 80 82700287 98 22 6 50 0,2/ 0,6 36 7 20 ±,6 0,6 (.32) 00 82700288 5 27 20 60 0,2/ 0,6 4 2 230 ±,6,0 (2.2) Material: Aluminum with PTFE bushing. The mounting is supplied complete with mounting screws for attachment to the cylinder.
Rear eye with ball joint S* = Stroke Piston Ø Part no. E CD H 7 EX FL L MS XD Weight [kg] (lbs) 25 3683602000 40 0 4 20 4 4 8 ±,3 0, (0.22) 32 3683603000 46 0 4 22 6 7 42 ±,3 0, (0.22) 40 3683604000 55 2 6 25 7 20 60 ±,3 0,2 (0.44) 50 3683605000 62 2 6 27 8 22 70 ±,3 0,2 (0.44) 63 3683606000 80 6 2 32 2 25 90 ±,6 0,4 (0.88) 80 3683608000 94 6 2 36 24 30 20 ±,6 0,5 (.) 00 368360000 4 20 25 4 26 32 230 ±,6 0,9 (.98) Materials: Aluminum with a steel ball joint, lubrication-free. This mounting is supplied complete with mounting screws for attachment to the cylinder.
Foot mounting Piston Ø Part no. A B C D E F G H Stroke min. Weight [kg] (lbs) 25 368230200 35 70 43,0 6,5 20 28,5 47,3 5 0,5 (0.254) 32 368230300 40 80 36,5 6,5 3 28,0 50,5 32,5 5 0,25 (0.276) 40 368230400 40 90 45, 6,5 3 35, 60, 32,5 5 0,60 (0.353) 50 368230500 40 00 48,0 6,5 3 39,9 70,9 32,5 0 0,90 (0.49) Material: Black-anodized aluminum. The mounting can be placed anywhere along the length of the cylinder. It is supplied in units with mounting screws for attachment to the cylinder. Note: For precision mounting and long strokes, two mountings are recommended.
Pivot pin with anti-rotation device for "Bearing block with ball and foot" and "rear eye" Piston Ø Part no. A B C D3 0, D4 H 2 EK h 9 L 0/+0,2 L3 L2 L4 0,4 32 5230000082 8 22 0 0 3 0 32,5 4 4,5 4 40 523000082 22 26 2 2 4 2 38,0 48 5 6 50 5232000082 28 34,5 6 6 4 6 43,0 54 6 20 63 5233000082 28 34,5 6 6 4 6 49,0 60 6 20 80 5234000082 28 34,5 6 6 4 20 63,0 74 6 24 00 5235000082 28 34,5 6 6 4 20 73,0 84 6 24 Material: Hardened steel.
Bearing block with foot Piston Ø Part no. CK h 9 EM 0,2/ 0,6 G G2 JS 4 G3 H6 K JS 4 K2 max. R max. CA Js 5 S5 L3 max. Weight [kg] (lbs) 32 5230003422 0 26 2 8 3 8 38 5 0 32 6,6 0 0,7 (0.375) 40 523003422 2 28 24 22 35 0 4 54 36 6,6 2 0,2 (0.463) 50 5232003422 2 32 33 30 45 2 50 65 3 45 9,0 6 0,44 (0.97) 63 5233003422 6 40 37 35 50 2 52 67 5 50 9,0 6 0,54 (.9) 80 5234003422 6 50 47 40 60 4 66 86 5 63,0 20 0,96 (2.2) 00 5235003422 20 60 55 50 70 5 76 96 9 7,0 20,37 (3.02) Material: GGG 40.
Bearing block with ball joint and foot Piston Ø Part no. CH JS 5 CN H 7 EN 0, ER EU G JS 4 G2 JS 4 G3 H6 H K JS 4 K2 S5 H 3 Weight [kg] (lbs) 32 5230003442 32 0 4 6 0,5 2 8 3 0 6 38 5 6,6 0,9 (0.42) 40 523003442 36 2 6 8 2 24 22 35 0 6 4 54 6,6 0,25 (0.55) 50 5232003442 45 6 2 2 5 33 30 45 2 23 50 65 9,0 0,46 (.0) 63 5233003442 50 6 2 23 5 37 35 50 2 23 52 67 9,0 0,75 (.65) 80 5234003442 63 20 25 28 8 47 40 60 4 32 66 86,0,04 (2.29) 00 5235003442 7 20 25 30 8 55 50 70 5 33 76 96,0,4 (3.) Material: Grey cast iron, with steel ball.
Pivot pin with locking rings for "Bearing block with foot" and "rear eye" Piston Ø Part no. Part no. A D max. EK d 0 EL Weight [kg] (lbs) 32 5230000092 5230800092 9,0 56 0 46 + 0,03 (0.066) 40 523000092 523800092 2,0 63 2 53 + 0,05 (0.) 50 5232000092 5232800092 2,0 73 2 6 + 0,06 (0.32) 63 5233000092 5233800092 27,6 85 6 7 + 0,2 (0.265) 80 5234000092 5234800092 27,6 05 6 9 + 0,6 (0.353) 00 5235000092 5235800092 40,0 29 20 + 0,27 (0.595) Materials: BS 303 S3 Hardened steel
Bearing brackets aluminum, lubrication-free * The maximum pendulum movement for cylinders with rear eye 368-36 or 366-36 is ±45 C (±3 F) CR H 8 Part no. EA FA FE FK ±0, FN HB NH TH UL Weight [kg] (lbs) 0 367202000 6 0 2 29 5,5 0 27 37 0,08 (0.76) 2 367203000 9 7 22 32 6,6 44 55 0,06 (0.32) 6 367204000 28 6 25 35 49 9,0 6 65 82 0,7 (0.375) 20 367206000 38 9 29 40 59 9,0 9 80 99 0,28 (0.67) Supplied in pairs. Materials: Aluminum with steel bushings provided with a plastic surface coating, intended for normal loading cases. For mounting together with ball eye rod end or, alternatively, central male trunnion, pivoted mounting or rear eye (see the cylinder mounting for the respective cylinder). For ball eye rod end and rear eye a pivot pin kit is also required.
Steel bearing brackets * The maximum pendulum movement for cylinders with rear eye 368-36 or 366-36 is ±45 C (±3 F) CR H 8 Part no. EA FA FE FK ±0, FN HB NH TH UL Weight [kg] (lbs) 0 366202000 6 0 2 29 5,5 0 27 37 0,08 (0.76) 2 366203000 9 7 22 32 6,6 44 55 0,6 (0.353) 6 366204000 28 6 25 35 49 9,0 6 65 82 0,50 (.) 20 366206000 38 9 29 40 59 9,0 9 80 99 0,80 (.76) 25 36620000 46 22 34 48 7,0 22 96 8,30 (2.87) Supplied in pairs. Material: Zinc plated steel. Intended for more difficult loading cases and in conjunction with high temperature cylinders. For mounting together with "ball eye rod end" or, alternatively, "central male trunnion", "pivoted mounting" or "rear eye" (see the cylinder mounting for the respective cylinder). For ball eye rod end and rear eye a pivot pin kit is also required.
Pivot pin kit Part no. CN e8 AN AP Weight [kg] (lbs) 368302000 0 24,2 39 0,03 (0.066) 368304000 2 27,5 44 0,05 (0.) 368305000 6 37,5 59 0, (0.243) 368308000 20 44,5 70 0,8 (0.397) Material: Hardened steel. Can be combined with "ball eye rod end", "Rear eye with ball point" (368-36) and brackets. The axle is supplied with circlips.
Extra nut ISO 4035 Thread KK Part no. Zinc plated steel Part no. Stainless steel (BS 303 S3) KT KU Weight [kg] (lbs) M0x,25 3670302000 3590302000 7 5 0,008 (0.08) M2x,25 3670304000 3590304000 9 6 0,04 (0.03) M6x,5 3670305000 3590305000 24 8 0,024 (0.053) M20x,5 3670308000 3590308000 30 0 0,045 (0.099)
Rod clevis ISO 840 Thread KK Part no. D CK CM LE ER CE L BL CL Weight [kg] (lbs) M0x,25 82222024 8 0 0 20 2 40 5 26 20 0, (0.22) M2x,25 82222025 20 2 2 24 4 48 8 3 24 0,2 (0.44) M6x,5 82222005 26 6 6 32 9 64 24 39 32 0,4 (0.88) M20x,5 82222004 34 20 20 40 20 80 30 49 40 0,7 (.54) Material: Zinc plated steel.
Clevis in stainless steel ISO 840 (M 0-M 20) Thread KK Part no. BL CE CK e 8 CL CM B 2 ER LE Weight [kg] (lbs) M0x,25 3590502000 25 40 0 20 0 2 20 0, (0.22) M2x,25 3590504000 30 48 2 24 2 4 24 0,2 (0.44) M6x,5 3590505000 38 64 6 32 6 9 32 0,4 (0.88) M20x,5 3590508000 47 80 20 40 20 25 40 0,7 (.54) Material: Stainless steel (BS 303 S3).
Mounting plate D E F H Weight [kg] (lbs) Thread KK Part no. A B C h 9 M0x,25 3670803000 9 M6 29 9,0 30 5 24 0,05 (0.) M2x,25 3670804000 2 M6 34 22,5 36 5 26 0,08 (0.76) M6x,5 3670805000 2 M8 44 30,0 46 5 32 0,4 (0.309) Material: Anodized aluminum. The mounting is delivered complete with screws for locking on the piston rod. Intended for mounting "tools" on the piston rod.
Ball eye rod end ISO 839 Thread KK Part no. AV CE CN H7 EN 0/ 0, EU ER max. F H LF α Weight [kg] (lbs) M0x,25 82224003 20 43 0 4 0,5 4 2,9 7 4 26 0,08 (0.76) M2x,25 82224004 22 50 2 6 2,0 6 5,4 9 6 26 0,0 (0.22) M6x,5 82224205 28 64 6 2 5,0 2 9,3 22 2 30 0,30 (0.66) M20x,5 82224006 33 77 20 25 8,0 25 24,3 32 25 30 0,40 (0.882) Material: Zinc plated steel, with hardened swivel bearing (maintenance free).
Flexible coupling * Angular displacement of center line. ** Radial displacement of center line. Thread KK Part no. B D D 2 D 3 F min. L ±2 L 2 L3 ± SW SW 2 SW 3 SW 4 RV Weight [kg] (lbs) M0x,25 826409002 6 2,5 34 4 23 7 20 7,5 9 2 7 30 0,7 0,7 (0.375) M2x,25 826409003 7 2,5 34 4 24 75 24 3,0 9 2 9 30 0,7 0,23 (0.507) M6x,5 826409004 8 33,5 47 22 32 03 32 9,0 30 9 24 4,0 0,62 (.37) M20x,5 826409005 0 33,5 47 22 4 9 40 9,0 30 9 30 4,0 0,72 (.59) Material: Galvanized steel.
Profile cylinders, series PRA, PRB Accessories Flexible coupling with mounting plate (B) Axial play: 0,4... 0,8 mm (Ø32 25); 0,4... 0,95 mm (60 / 200) Radial play: 2...4 mm (Ø32 25); 3 mm (60 / 200) Material: Steel, galvanized Piston Ø Part no. KK a a2 d H d6 H3 d7 H3 e H3 e2 h t2 H SW Weight [kg] (lbs) 32 82700629 M0x,25 60 37 20 6,6 36±0,5 23±0,5 5 7 24 7 0,300 (0.66) 40 82700630 M2x,25 60 56 25 9 5 42±0,2 38±0,2 20 9 30 9 0,400 (0.88) 50 8270063 M6x,5 80 80 30 8 58±0,2 58±0,2 20 32 24 0,900 (.98) 63 8270063 M6x,5 80 80 30 8 58±0,2 58±0,2 20 32 24 0,900 (.98) 80 82700632 M20x,5 90 90 40 4 20 65±0,3 65±0,3 20 3 35 36,50 (2.54) 00 82700632 M20x,5 90 90 40 4 20 65±0,3 65±0,3 20 3 35 36,50 (2.54) 25 82700633 M27x2 90 90 40 4 20 65±0,3 65±0,3 20 3 35 36,00 (2.43) 60 82700634 M36x2 25 25 60 8 26 90±0,3 90±0,3 30 7 55 50 3,400 (7.5) 200 82700634 M36x2 25 25 60 8 26 90±0,3 90±0,3 30 7 55 50 3,400 (7.5)
Profile cylinders Euromec, Series 68 Linear control units Linear control unit, H-shape Type Standard Ambient temperature range H-shape Linear control units suitable for cylinders as per ISO 6432, VDMA 24562 and CNOMO / NFE 49-003 -20 C to +80 C (-4 F to +76 F) Materials Bearing housing Anodized aluminum Carrying plate Anodized aluminum Control rods for Stainless steel, smooth-rolled plain bearing Flexible coupling in the Stainless steel, smooth-rolled carrying plate Plain bearing Sintered bronze Ball bearing Steel Screws Galvanized steel Application area Guide unit reduces bending of the piston rod when positioning high loads High precision due to long guide High useful load due to solid guide rods Technical information Piston Ø [mm] 32 40 50 63 80 00 Weight 0 mm stroke [kg],300 2,300 3,700 4,700 8,800,00 (lbs) (2.866) (5.07) (8.57) (0.362) (9.40) (24.47) H-shape, ball bearing add. per 00 mm [kg] 0,090 0,60 0,250 0,250 0,390 0,390 (lbs) (0.98) (0.353) (0.55) (0.55) (0.860) (0.860) Weight 0 mm stroke [kg],300 2,300 3,700 4,700 8,800,00 (lbs) (2.866) (5.07) (8.57) (0.362) (9.40) (24.47) H-shape, plain bearing add. per 00 mm [kg] 0,090 0,60 0,250 0,250 0,390 0,390 (lbs) (0.98) (0.353) (0.55) (0.55) (0.860) (0.860) Part no. H-shape, sinter friction bearing (L) For piston dia. 32 40 50 63 80 00 Stroke 50 08240220 08240230 08240240 08240280 - - 00 0824022 0824023 0824024 0824028 08240260 08240270 60 08240222 08240232 08240242 08240285 - - 200 08240223 08240233 08240243 08240282 0824026 0824027 250 08240224 08240234 08240244 08240286 - - 320 08240225 08240235 08240245 08240283 08240262 08240272 400 08240226 08240236 08240246 08240287 - - 500 08240227 08240237 08240247 08240284 08240263 08240273 600 08240228 08240238 08240249 08240288 08240264 08240274 800 08240229 08240239 08240474 08240289 08240265 08240275 000 08240470 08240472 08240475 08240290 08240266 08240276 200 0824047 08240473 08240476 0824029 08240267 08240277 Rec. max. stroke 200 200 200 200 200 200 Spare parts kit (to be ordered separately) Piston dia. Order no. 32 82700945 40 82700946 50 827009530 63 827009530 80 827009535 00 827009535
Profile cylinders Euromec, Series 68 Linear control units Part no. H-shape, linear ball bearings (L5) For piston dia. 32 40 50 63 80 00 Stroke 50 08240320 08240330 08240340 08240380 00 0824032 0824033 0824034 0824038 08240360 08240370 200 08240322 08240332 08240342 08240382 0824036 0824037 320 08240323 08240333 08240343 08240383 08240362 08240372 500 08240324 08240334 08240344 08240384 08240363 08240373 600 08240325 08240335 08240345 08240385 08240364 08240374 800 08240326 08240336 08240346 08240386 08240365 08240375 000 08240327 08240337 08240347 08240387 08240366 08240376 200 08240328 08240338 08240348 08240388 08240367 08240377 Rec. max. stroke 200 200 200 200 200 200 Spare parts kit (to be ordered separately) Piston dia. Part no. 32 827009526 40 827009527 50 827009528 63 827009528 80 827009529 00 827009529 A 2
Profile cylinders Euromec, Series 68 Linear control units H = Stroke Relubricate ball bearings after 5000 km (lubricating grease KP2K DIN 5825), order no. 82999099 Lubricate more often in dusty conditions Piston dia. A A2 A3 A4 A5 B C G G2 G3 G4 L L2 L3 L4 L5 L6 L7 L8 L9 L0 L L2 *,2 32 78 32,5 6 8 50 2 74 M6 6,6 6,5 90 45 97 77 25 6 7 2 94 7 4,3 64 +5 40 84 38 69 99 54 6 87 M6 6,6 6,5 0 54 5 92 40 7 22 2 05 2 74 +5 50 00 46,5 85 9 72 20 04 M8 9 5 9 30 63 37 205 50 8 26 5 06 26 8,8 89 +0 63 05 56,5 00 32 82 20 9 M8 9 5 9 45 80 52 237 82 8 26 5 2 26 5,3 89 +0 80 30 72 30 66 06 25 48 M0 8 80 00 89 280 25 9 32 20 28 34 2 0 +0 00 50 89 50 90 3 25 72 M0 8 200 20 23 280 220 9 32 20 38 39 24,5 5 +0 Piston dia. L3 L4 L5 *2 L7 L8 M8 L9 *2 L9A *3 *2 L20 L2 L22 SW SW 2 R R2 H7 E + F + ØG +0,5 ØH SW T 32 50 76 37 50,2 +0,4 30 4 2 SW30 6 6,2 3 7 6 5 7 6 5 5 4 40 58 8 37 58,2 +0,4 35 8 9 45 4 9 5 9 6 6 8 7 6 6 4 50 70 79 37 70,2 +0,4 40 36 +8 54 4 23,2 22 24 6 6 8 7 6 6 6 63 85 37 85,2 +0,4 45 2 +2 54 4 28,2 22 24 6 6 8 7 6 6 6 80 05 28 42 05,4 +0,6 45 34 +4 60 4 36 27 30 6 7 9 9,4 8 8 20 00 30 28 37 30,4 +0,6 55 9 2 60 4 44,5 27 30 6 7 9 9,4 8 8 20 These values apply for linear ball bearings as well as for sinter-friction bearings. For differing values, see below. * Change the adjustment range of the flexible coupling accordingly (see L5 and L9) *2 For retracted cylinder **3 Cylinders without signal 3
Profile cylinders Euromec, Series 68 Linear control units Piston dia. L5 *2 These values apply 32 37 4 2 77 for sinter-friction 40 37 8 9 92 bearings 50 37 4 4 205 63 37 2 +2 237 80 42 34 +4 280 00 37 9 2 280 L9 *2 L9A *3 *2 L4 4
Profile cylinders Euromec, Series 68 Linear control units Useful load Useful load for linear control units with sinter friction bearings F = Useful load Z = Bearing-out Useful load Service life 2 x 0 6 m Useful load for linear control units with linear ball bearings F = Useful load Z = Bearing-out 5
Profile cylinders Euromec, Series 68 Linear control units Reduction of useful load on short strokes k = adjustment factor: normal = ; on impact: 2 The nominal load data determined for short-stroke movements from the diagram have to be multiplied with the adjustment factor k. These short-stroke adjustments are already included in the load diagram for a bearing-out of more than 60 mm. Service life 5 x 0 6 m F permit = F x 0,5 Bending F = Useful load (at the load center) SF = Bending Z = Bearing-out 6
Profile cylinders Euromec, Series 68 Linear control units Bending due to own load Bending due to 0 N load 7
Profile cylinders Euromec, Series 68 Accessories Sensors Series ST8 (275) * LED Technical Data Outlet PNP with cable PNP with connector Reed with cable Reed with connector Voltage and type of current 0 30 V DC 0-30 V DC 0 30 V DC, 240 V AC 0 60 V DC Max. continous current <50 ma <50 ma <00 ma <00 ma Voltage drop <2 V <2 V <3 V <3 V Leakage current 0 µa 0 µa Internal consumption 0 ma 0 ma Ambient temperature range -25 C to +75 C (-3 F to +67 F) -25 C to +75 C (-3 F to +67 F) -25 C to +75 C (-3 F to +67 F) -25 C to +75 C (-3 F to +67 F) Protection IP 67 as per IEC 529 IP 67 as per IEC 529 IP 67 as per IEC 529 IP 67 as per IEC 529 Indication LED LED LED LED De-energization delay >20 ms >20 ms Material Housing: Polyamide Cable: PVC (3x0,4 mm²) Housing: Polyamide Cable: PUR (3x0,4 mm²) Housing: Polyamide Cable: PVC (2x0,4 mm²) Housing: Polyamide Cable: PUR (2x0,4 mm²) Part no. Symbol Type Fig. Part no. Cable length L [m] 27503230 2,5 Reed 27505230 0 2 2750320 0,3 m + M8 connector * As per EN 50082-2. Brown 2. Blue 3. Black 4. Load/signal 275030 2,5 275050 0 PNP 2 275020 0,3 m + M8 connector 2 27502320 0,3 m + M8 connector* 3 2750220 0,3 + M2 connector
Sensor mounting for Sensors 275 Piston Ø Part no. 25 00 2752000 Material: Aluminum, screw and nut stainless steel (BS 36 S 3).
Circular connector with cable for sensors Operating voltage AC 60 V / DC 75 V Degree of protection IP 65 as per IEC 529 (DIN VDE 0470) screwed IP 67 Numbers of pins 3 Cross section of cable 3 x 0,25 mm² Piping type PVC - hose Insulation class C as per VDE 00 Cable with connector BN=brown, BK=black, BU=blue Cable length L [m] Part no. straight Fig. Part no. angled Fig. 2 Part no. straight Fig. 3 Part no. angled Fig. 4 2 8946062 89460622 89462032 89462042 5 89460602 894606202 894620302 894620402 0 89460622 894606222 894620322 894620422 5 89460632 894606232 894620332 894620432
Cable holder Piston Ø Part no. 25 00 2752300000 Materials: ABS-plastic. 0 pcs are included in the bag.
Sub-base for direct mounting of Compact 0 or Compact 8 valves Version Part no. Valve size Port nos., 4 Port nos. 3, 5 A B C D E F G H K L M Weight [kg] (lbs) Upright 0493839705 258 G /8 G /8 79 65,5 48 33 8 8 6,5 28,5 9 8 0,08 (0.76) 04938408 250 M 7 G /8 79 65,5 42,5 33 26 4 23/25 32,5 4 9 3 0,09 (0.98)
Sub-base for direct mounting of Compact 0 or Compact 8 valves Version Part no. Valve size Port nos., 4 Port nos. 3, 5 A B C D E F G H K L M Weight [kg] (lbs) Lying 0493839802 258 G /8 G /8 79 65,5 48 33 8 8 6,5 28,5 9 8 0,08 (0.76) 0493840207 250 M 7 G /8 79 65,5 42,5 33 26 4 23/25 32,5 4 9 3 0,09 (0.98) Installation Instructions Connection: Outlet port 2 of the valve should be connected to the end cover where the base plate is fitted. Outlet port 4 is connected to the opposite end cover with tubing. Inlet port and exhaust ports 3 and 5 are located on one side of the plate. Flow: The maximum flow for a valve mounted on these base plates is somewhat lower than for a valve mounted on a normal subbase. Installation: The plate is fitted directly on the front or rear end cover of the cylinder with a banjo thread. Alternatively one or the other of the two banjo threads (G /8 and G /4) can be used, depending on the size of the of the cylinder port. For cylinders 00 25 mm dia., a reducing nipple for the cylinder connection port G /2 is required. Min. strokes: The smallest stroke which a cylinder can have when the base plate is turned towards the opposite end cover and connected with fittings and plastic tubing, 6 mm dia., is 50 mm.
Base plate for direct mounting of ISO valves Piston Ø Part no. Valve size Port nos., 2, 4, 3, (5) Port nos. 2, 4 A B C D E F G H K Weight [kg] (lbs) 32-25 580690000 ISO G /8 G /8 93,5 80 62 35 8 9 20 5 40 0,75 (0.386) 63,25 5802690000 ISO 2 G 3/8 G /8 27 09,5 8,5 46,5,5 3 32 29 60 0,580 (.28) Installation Instructions Connection: Outlet port 2 of the valve should be connected to the end cover where the base plate is fitted. Outlet port 4 is connected to the opposite end cover with tubing. Exhaust ports 3 and 5 are combined in the plate to a common exhaust port. Inlet port and control ports 2 and 4 are located on one side of the plate. Flow: The maximum flow for a valve mounted on these base plates is somewhat lower than for a valve mounted on the subbase. Installation: The plate is fitted directly on the front or rear end cover of the cylinder with a banjo thread. G /2 is required. Alternatively one or the other of the two banjo threads (G /8 and G /4) supplied for base plate 580-69 can be used, depending on the size of the cylinder port. A size G 3/8 banjo thread is supplied for base plate 580-269. For cylinders 00 and 25 mm dia., a reducing nipple for the cylinder connection port G /2 is required with Part no. 86323800. Min. strokes: The table below shows the smallest stroke which a cylinder can have when the base plate is turned towards the opposite end cover and connected with fittings and plastic tubing 6 mm dia. for 580-69 and 2 mm dia. for 580-269. Minimum strokes [mm] Piston Ø Stroke Valve 32 50 ISO 40 50 ISO 50 50 ISO 63 00 ISO, ISO 2 80 00 ISO, ISO 2 00 00 ISO, ISO 2 25 00 ISO, ISO 2
Bosch Rexroth AG Pneumatics Ulmer Straße 4 DE-30880 Laatzen Deutschland Tel. +49 (0)5-2 36-0 Fax. +49 (0)5-2 36-269 sales-pneumatics@boschrexroth.de www.boschrexroth.de Bosch Rexroth Limited Pneumatics Broadway Lane, South Cerney, Cirencester Gloucestershire GL7 5UH Great Britain Phone: +44-2 85-863 000 Fax: +44-2 85-863 003 info@boschrexroth.co.uk www.boschrexroth.co.uk Bosch Rexroth Corporation Pneumatics 953 Mercer road Lexington, KY 405-02 USA Phone: +-859-254 80 3 Fax: +-859-254 4 88 info@boschrexroth-us.com www.boschrexroth-us.com Bosch Rexroth Canada Corp. Pneumatics 3426 Mainway Drive Burlington, Ontario L7M A8 Canada Tel: + 905-335-55 Fax. + 905 335-484 info@boschrexroth.ca www.boschrexroth.ca Bosch Rexroth Pty. Ltd. Pneumatics 23 Iverseb Terrace Christchurch New Zealand Tel. +64 (00) 643 365 959 Fax. +64 (00) 643 358 9703 Bosch Rexroth Pty. Ltd. Head Office 3 Valediction Road Kings Park NSW 248, Sydney Australia Tel. +6 (2) 983-7788 Fax. +6 (2) 983-5553 rexeng@rexroth.com.au www.boschrexroth.com.au 006-05-09 This document, as well as the data specifications and other informations set forth in it, are the exclusive property of Bosch Rexroth AG. Without their consent it may not be reproduced