Request for Bids City of Derby Public Works 2015-027 INFORMATION FOR BIDDERS FURNISH THE CITY OF DERBY, KANSAS, ONE (1)2014 or NEWER TANDEM AXLE 10 YARD DUMP TRUCK w/ PLOW 1. Sealed bids, on the attached form only, will be received at the office of the City Clerk until 11:00 a.m., on 1, Oct, 2015, at which time the bids will be opened in the City Council Room at City Hall and read aloud. Bids should be delivered/mailed to the City Clerk s office, 611 Mulberry Rd. Ste. 300, Derby, KS 67037. Bids received after said time will be returned unopened. Bids are to be sealed and outside marked 2014 TANDEM AXLE 10 YARD DUMP TRUCK W/PLOW. No bid may be withdrawn within thirty (30) days from the scheduled closing time for receiving proposals. Bid prices shall be F.O.B., Derby, KS. The dump truck is for the Street Division of the Department of Public Works and is not subject to state and local sales taxes. 2. Bid price shall remain in effect for a minimum of sixty (60) days after bid opening date. The City reserves the right to reject any and all bids and to waive any irregularities therein. For further information or clarification contact George Brown, Public Works Street Superintendent, 316-788-0301 or email at georgebrown@derbyweb.com. 3. It is the intent of these specifications to describe the minimum requirements for one (1) unused 2014 or newer Tandem Axle 10 Yard Dump Truck W/Plow. Any addition, deletions, or variations from the specifications must be noted in writing. These specifications shall be construed as a minimum. Should the manufacturer s current published data or specifications exceed these, they shall be considered minimum and shall be furnished. Specifications also require that the bidder furnish descriptive literature, complete specifications, and all necessary data on the proposed equipment. All parts not specifically mentioned, which are necessary in order to provide a complete diesel powered dump truck, shall be furnished by the successful bidder and shall conform in strength, quality of material and workmanship to that usually provided by the engineering practice indicated in these specifications.
4. Payment Terms Net 30 Days. DETAILED SPECIFICATIONS FURNISH THE CITY OF DERBY, KANSAS ONE (1) 2014 OR NEWER TANDEM AXLE 10 YARD DUMP TRUCK w/plow One new and unused 2014 or newer Tandem Axle truck cab and chassis with a ten (10) cubic yard dump bed & Snow plow, of all new parts and materials, with all standard equipment and any other optional equipment needed to meet or exceed the following minimum specifications. The unit shall be delivered completely assembled and ready for use. Bidders shall indicate in the appropriate column whether or not each minimum specification will be met or exceeded. Inability to meet all minimum specification will not necessarily disqualify bid. The City reserves the right to waive minor specification deficiencies and make award on a best bid basis. GVW: 56,000 lbs WHEELBASE: 201 Inches CAB TO AXLE: 126 Inches TIRES: 11R22.5 16 Ply Radial Tubeless Steel Belted Front (2) Highway Tread Rear (8) Mud and Snow Tread No Spare WHEELS: Disc Tubeless Rim 22.5 X 8.25 No Spare AXLES: Front 16,000 lbs Rear 40,000 lbs Inter-Axle Plus Differential Full Lock Driver Controlled Steel Walking Beam Type And Axle Ratio of 5.29
SPRINGS: Front 16,000 lbs Rear 40,000 lbs SHOCK ABSORBERS: Heavy Duty Front and Rear BRAKES: Air Brake System Air Parking Brake Front Brakes 16.5 X 6 Rear Brakes 16.5 X 7 Automatic Slack Adjusters AIR COMPRESSOR: 13.2 cfm Air Dryer with Heater Moisture Ejectors FRAME: 120,000 PSI Tensile Strength Frame and Front Bumper shall be Extended 8 to accommodate Snow Plow Frame STEERING: Power Steering FUEL TANK: Minimum 50 Gallon Capacity ELECTRICAL: Alternator 160 Amp Batteries (2) 1850 CCA 12 Volt Heavy Duty Starter Electric Horn Lights ICC Regulation ENGINE: Diesel 300 HP 800 Foot Pounds Torque Anti-Freeze to 20 Degree F Heavy Duty Radiator Internal Oil Cooler Block Heater 1250 Watt TRANSMISSION: Allison 3000 RDS Automatic Trans.
External Oil Cooler Shift Control Floor Mounted CAB: Type Conventional Cab, 3 Sets of Keys to be furnished Bumper-swept back Dome Light Mirrors 2 West Coast Type Driver Seat Full Suspension Low Back Passenger Seat Non Suspension Low Back Gauges: Speedometer, Oil Pressure Voltmeter, Temperature, Fuel Level, Tachometer, Trans. Temperature Wiper 2 Speed Intermittent Heater/Defroster Air-Conditioning AM/FM Radio Color: Exterior White If the Hood Tilts Grille must remain Stationary to accommodate plow frame DUMP BED: Must be 10 Gauge Steel 15 X 7 X 32 40 Tailgate 10 Yard Capacity Painted Black Cab Protector The spreader controls shall be in-cab mounted on the console, must be component technology system MS2 control, and have a central hydraulic system as follows: A. Hydraulic valve shall be capable of a nominal 30 GPM with published flow curves to 40 GPM. Valve must be
pressure compensated load sensing type with individual flow control compensators on (cont.) each section. Changing a section from a single to double action is done by replacing and shuttle cartridge. Valve is to be arranged as follows: 1. Inlet cap with inletoutlet and load sense ports. 2. Single action cylinder spool for hoist. Spring return with section flow compensator. 3. Single action cylinder spool for angling snowplow. 4. Single action cylinder spool for snow plow lift. spring return with adjustable section flow compensator. 5. Single action motor spool for spinner, proportional 12 VDC spring center with manual override. 6. Single action motor spool for auger/conveyor. proportional 12 VDC spring center with manual override. 7. Outlet cap with pressure reducing valve and solenoid drain. B. Section 1-3 will be actuated by Morse RVC cable control systems. 1. Single axis control for dump box (2 & 3) joystick t pattern controls for plow lift. Cable core must be stainless steel and capable of 100# push-pull. Controls shall be mounted in cab on console between seats.
C. Filter will be return line type, 10 micton spin-on element with 1 ¼ NPT ports mounted as close as Possible to the reservoir. By-pass (Cont.) And condition gauge are necessary. Tank mount filter is optional. D. Reservoir shall be 30 gal. Minimum with breather cap, magnetic drain plus, and suction screen. Fill neck must be screened and a sight/temperature gauge mounted on the reservoir so easily visible for inspection. Symmetrical side ports are needed to allow mounting on either side for truck frame. Bottom suction sump not allowed. HYDRAULIC HOIST: Telescopic for 15 Dump Bed EMERGENCY LIGHTING: 25 Ton Capacity Back-Up Alarm Emergency LED strobe bar mounted To cab protector Emergency strobes in beam of rear Dump Bed Aux Plow lights TARP: Cab controlled tarp for Dump bed SNOW PLOW: Full trip Reversible, 36 H x 11 L minimum Universal quick hitch Single acting lift cylinder Hydraulic Quick couplers KDOT plow/blade spec Built in level lift 6- ½ vertical reinforcing ribs Reversing cylinders 2
SAFETY: Vehicle must conform to all state and federal health, safety, emissions, lighting, and noise regulations. Mud flaps shall be provided. MANUALS: 2 sets operator s manual, a shop repair manual, and a parts manual shall be provided for the truck cab and chassis, the dump body, Plow and the hydraulic system. WARRANTY: Full factory warranty, a copy of which is to be provided with the bid.