MB series Various axis vombination are available and easy maintenance Improved RPP timing belt MB //0/ Basic slider block * Various length of slider based on customer's needs are available. * Customized roller bearing is available MB //0/-D (Custmized type) Using high-quality of bearing steel shaft Felt wiper prevents stiffening after long time of operation Spring inside of seal keeps certain level of frictional resistance S: Standard slider block H: Standard slider + 4rollers
TPC motion MB,,, 0, Features Track roller guide & Belt type unit Various axis combination High tensile timing belt Customized optoin Easy maintenance How to order 1 2 3 4 MB S 0 0011 C D3 E2 1 2 3 4 6 7 9 1 Sereis 2 / / / 0 / 3 Block(slider) S : Standard(4 roller bearings) T : S + 2 additional bearings H : S + 4 additional bearings Please contact us for additional quantity of slider 4 Stroke(Unit : mm) : 0 ~ 200 : 0 ~ 0 / 0 / : 0 ~ 00 Please contact us for longer stroke than standard Sensor Drive version (0:Standard,1:Coupling type 2:Shaft type) TYPE MODEL 1 2 Pulley direction Pulley shape 0 0 1 00 20 4 3 Please contact us for customized pulley type 6 Color Blank : White(outer) L : White + LM raydent B : Black (outer) BL : Black(outer) + LM raydent 7 Sensor (dog included) Blank : None C : Photo sensor + Basic socket - Basic 3EA Sensor bracket CJ : C + Cable socket 2M - Basic 3EA Other than basic : C(J)(Q'ty) Example)C2,CJ2 Mounting bracket Blank : None D(Q'ty) necessary quantity. Example)D2,D3 9 Bracket of reducer (including coupling) Blank : None TYPE MODEL SYMBOL SIZE 0 E1 42 E2 62 E3 90 E4 1 Basic option : ATG, APLUS, SESAME Customized code Item number Sensor and connector 0 0 Sensor dog SX671-PL SX671-L-PL Item number Remarks PDG-M-PL PDG-M-PL PDG-M-PL SX672-PL 0 PDG-M0-PL PDG-M-PL + + EE-SX671 + EE1 EE-SX671 + EE6 Photo sensor for single Photo sensor for double PSBS--PL PSBD--PL PSBS--PL PSBD--PL PSBS--PL PSBD--PL 0 PSBS-0-PL PSBD-0-PL PSBS--PL PSBD--PL Mounting bracket Item number Remarks MBK-PL MBK-PL MBK-PL 0 MBK0-PL MBK-PL 2 www.tpcpage.com
MB Series Specifications MB specifications Specification MB MB MB MB0 MB Max speed 00 00 00 00 00 Payload (kgf) 3 (horizontal) (horizontal) 1 (horizontal) (horizontal) 70 (horizontal) Stroke (mm) Max. 200 Max. 0 Max. 00 Max. 00 Max. 00 Repeatability (mm) ± 0.0 ± 0.0 ± 0.0 ± 0.0 ± 0.0 Diameter of pulley (mm) Ø 23.7 Ø 31.3 Ø 41.3 Ø 61.12 Ø 1.49 Pulley action perimeter (mm/rev) 7 1 192 26 Belt(LM guide)type Belt(Track roller guide)type No load torque (Nm) 0.2 0.3 0.6 0.9 1.4 Belt S3M / W12 RPP / W1 RPP / W2 RPP / W RPP / W0 LM Guide S:4 roller bearing standard / T : S type + 2 roller bearing / H : S type + 4 roller bearing Basic weight (kgf) 1 2.1.6 12.9 2 Weight per mm stroke (kgf) Note) Customized options such as motor, raydent and LM guide are available. MB structure Component list 0.14 0.3 0. 0. 1.4 0 0 70 Size (mm, W x H) x 47 x 64 x 90 0 x 121 x 1 No Component name Material No Component name Material 1 Rail Aluminum alloy 7 Rail Aluminum alloy Shaft Ø4 2 Ø6 Ø Bearing steel Track roller Bearing steel 0 Ø12 Ø16 3 Pulley box Aluminum alloy 9 Washer - 4 Bearing - Wiper FELT Timing pulley High carbon steel 11 Sealing EP 6 Timing belt Urethane 12 Belt clip Carbon steel Ball Screw type Guide Type Accessory TPC mechatronics corp 3
DC 2 SC 6-13(X) Basic specifications 36 2-BELT TENSIONER STOP BOLT (M4) 47 70 42 32 DC 2 SC 6-13(X) MB Stroke (mm) MB 0~200 Speed Horizontal(0.3G) Max. Payload(kg) Horizontal(0.G) 70 6 3 120 3 MB 47 3 A 14 47 DC2SC 4-M4 TAP DP 2-ØH7 DP 24.4 9 PGX44-H ATG() HF-KP13-4 2.4 HF-KP13-2 HF-KP13 MITSUBISHI 36 ST+21 ST+146 (RAIL LENGTH) 6 ST 36 70 MBK 4. 1. 3.. 7.2 "A" (M4 NUT SLOT ) 3.1 1. 2. 4..6 "B" (M3 NUT SLOT ) 0 13 1 1 ST+114 1 2 2x2-M TAP DP 42 2x2-M4 C/B DP4. B RAIL PROFILE 9. 21. - Please contact us to change sensor or motor options. - Customized tap or pin pitch on the bottom is available. Weight & speed for each stroke Stroke(mm) Weight(kg) 0 2.4 1 2. 2.7 10 2. 3.0 0 3.1 3.2 1700 3.4 100 3. 1900 3.7 00 3. 20 4.1 20 4.4 20 4.6 200 4.9 ratio Max. Speed 70 120 3 Note) The weight of motor and reducer is not included. 4 www.tpcpage.com
JC32C JC32C JC32C MB Basic specifications Belt(LM guide)type Stroke (mm) MB 0~0 Speed Horizontal(0.3G) Max. Payload(kg) Horizontal(0.G) 00 2 0 9 9 MB 64 12 66 B A 297.4 69 67 21 26 JC32C 70 0 PGX44-H ATG() 4-BELT TENSIONER STOP BOLT (M) 4-M TAP DP12 2-Ø H7 DP Belt(Track roller guide)type HF-KP13-4 2.4 HF-KP13-2 HF-KP13 MITSUBISHI.33 6.3.4 2. "A" (M6 NUT SLOT) 1.6 Ø9 - Please contact us to change sensor or motor options. - Customized tap or pin pitch on the bottom is available. Weight & speed for each stroke Note) The weight of motor and reducer is not included. Allowable overhang distance Horizontal(X) 9. "C" (M4 NUT SLOT).2.4 2. 7 "B" (M NUT SLOT) 24. 73 1 49 1 2x2-M6 TAP DP12 ST + 29 ST + 0 (RAIL LENGTH) ST 6 49 MBK 2x2-M6 C'B DP9 C 11 29 RAIL PROFILE Stroke(mm) 0 1 10 0 1700 100 1900 00 20 20 20 200 00 Weight(kg).1.4.7 6.0 6.3 6.6 6.9 7.1 7.4 7.7.0.6 9.2 9..4 11.0 ratio Max. Speed Payload 0 90 24 kg mm mm 12 kg 70 mm 0 mm kg 1 mm 00 mm 4 kg 2 mm 0 mm 00 0 Ball Screw type Guide Type Accessory TPC mechatronics corp
HF-KP43-3 MB Basic specifications Stroke (mm) MB 0~00 Speed Horizontal(0.3G) Max. Payload(kg) Horizontal(0.G) 60 0 10 1 MB 90 14 B A 4 92 4-BELT TENSIONER STOP BOLT (M6) HF-KP23-4 2.6 3 79.2 9 99 HF-KP23-2 H-JC32C PGX62-H ATG() HF-KP23 MITSIBISHI(0W) 4-M TAP DP1 2-Ø H7 DP ST + 3 9 ST + 2 (RAIL LENGTH) 10 ST 144 MBK 60 C 9 0 0 0 67 76.6 32 9.1.2 2. 12. 7 7 13.6.4 "A" (M NUT SLOT) "B" (M NUT SLOT) 29. "C" (M NUT SLOT) 2x2-M TAP DP16 2x2-M C'B DP24 1 RAIL PROFILE - Please contact us to change sensor or motor options. - Customized tap or pin pitch on the bottom is available. Weight & speed for each stroke Stroke(mm) 0 1 10 0 1700 100 1900 00 20 20 20 200 00 Weight(kg).6 11.1 11.6 12.1 12.6 13.1 13.6 14.1 14.6 1.1 1.6 16.6 17.6 1.6 19.6.6 ratio Max. Speed Note) The weight of motor and reducer is not included. Allowable overhang distance 60 10 0 Horizontal(X) Payload 0 90 kg 4 mm 0 mm kg 1 mm 00 mm 14 kg 170 mm 0 mm 7 kg mm mm 6 www.tpcpage.com
HF-KP43-3 MB 0 Basic specifications MB0 121 14 Stroke (mm) MB0 0~00 B A 117 3 7 1 126 Speed 2 4-BELT TENSIONER STOP BOLT (M) Horizontal(0.3G) Max. Payload(kg) Horizontal(0.G) 40 0 9 0 19 1 1 Belt(LM guide)type Belt(Track roller guide)type HF-KP43-4 34. 36 79 9. HF-KP43-2 H-JC42C PGX62-H ATG() HF-KP43 MISUBISHI(0W) 4-M TAP DP1 2-Ø6 H7 DP 13 7 "A" (M NUT SLOT) "B" (M NUT SLOT) 9.2 - Please contact us to change sensor or motor options. - Customized tap or pin pitch on the bottom is available. Weight & speed for each stroke Allowable overhang distance Horizontal(X). 14. 9 14 3 "C" (M NUT SLOT).2 9.2 1 1 4 90 694 0 214 2x2-M TAP DP1 2x4-M C'B DP9 Payload 0 90 0 kg mm mm 2 kg mm 0 mm kg mm mm kg 1 mm 0 mm kg 2 mm 00 mm kg mm 0 mm ST + 44 ST + 274 (RAIL LENGTH) ST 90 MBK C 170 0 RAIL PROFILE Stroke(mm) 0 1 10 0 1700 100 1900 00 200 00 0 00 Weight(kg).9 21.7 22. 23.3 24.1 24.9 2.7 26. 27.3 2.1 2.9 32.9 36.9.9 44.9 ratio 40 Max. Speed 9 19 Note) The weight of motor and reducer is not included. 0 0 Ball Screw type Guide Type Accessory TPC mechatronics corp 7
HF-KP73-3 Basic specifications 1 27 B A 4-BELT TENSIONER STOP BOLT (M) 1 2 90 MB Stroke (mm) MB 0~00 Speed Horizontal(0.3G) Max. Payload(kg) Horizontal(0.G) 6 90 0 120 70 70 2 1 MB 2 4 4.3 1 0 116. 113. 0 H-JC4C PGX90-H ATG(90) HF-KP73 MITSUBISHI(70W) 4-M TAP DP2 2-Ø6 H7 DP 1 4 ST + 4 ST + 364 (RAIL LENGTH) ST 1 2.1 1.1 1 16 "A" (M NUT SLOT) 6 11 16 17 "B" (M NUT SLOT) 10 1 0 0 764 0 MBK C 12 6.2 "C" (M6 NUT SLOT) 70 2x2-M12 TAP DP 2x4-M C'B DP9 2 RAIL PROFILE - Please contact us to change sensor or motor options. - Customized tap or pin pitch on the bottom is available. Weight & speed for each stroke Stroke(mm) Weight(kg) 0 42.0 1 43.4 44. 10 46.2 47.6 0 49.0 0.4 1700 1. 100 3.2 1900 4.6 00 6.0 200 63.0 00 70.0 0 77.0 00 4.0 400 91.0 000 9.0 ratio 6 Max. Speed 120 2 Note) The weight of motor and reducer is not included. Allowable overhang distance 70 Horizontal(X) Payload 0 90 90 kg 3 mm 0 mm 4 kg 1 mm 00 mm 70 kg 0 mm mm 3 kg 170 mm 0 mm kg 0 mm 0 mm kg 60 mm 00 mm www.tpcpage.com
MB MB PULLEY OPTION PULLEY OPTION PSH Type One body type pulley that having driving shaft PCP Type This type pulley is joined with Jaw-coupling directly and supplied with coupling. Belt(LM guide)type Belt(Track roller guide)type Pulley of MB PSH-S (MB-1A) 36 2 2 44 M4 TAP DP Pulley of MB PSH-S (MB-1A) 42 1 A A Φ6H7. SECTION A-A PSH-D (MB-19A) 36 1 42 1 2 2 PSH-D (MB-19A) 44 M4 TAP DP Φ6h7 A A SECTION A-A Φ6. Ball Screw type Guide Type Accessory TPC mechatronics corp 9
MB MB PULLEY OPTION Pulley of MB PSH-S (MB-1A) PSH-C (MB-A) PCP-S (MB-21A) PCP-D (MB-22A) Pulley of MB0 PSH-S (MB0-1A) PSH-C (MB0-A) PCP-S (MB0-21A) PCP-D (MB0-22A) www.tpcpage.com
QB Pulley of MB PSH-S (MB-1A) PCP-S (MB-21A) PSH-C (MB-A) PCP-D (MB-22A) Belt(LM guide)type Belt(Track roller guide)type Ball Screw type Guide Type Accessory TPC mechatronics corp 61