Linear Units with Belt Drive and Slide Guide
|
|
- Joseph Daniels
- 5 years ago
- Views:
Transcription
1 84
2 Linear Units Linear Units with Belt Drive and Slide Guide Movopart Velocity Noise Acceleration Maintenance Repeatability Cost Force Guide Robustness Load Torque Stiffness Typical Applications Typical applications are where low loads need to be moved at medium speed and high acceleration at low cost. These units are suited to harsh environments. Typical examples are for machines in the food, chemical, paper and wood working industry, in materials handling, cutting, scanning and printing applications. 85
3 Movopart M M50 Features Can be installed in all directions Patented self-adjusting prism slide guides Resistant to shock loads and vibrations Low cost M50 Profile size (width height) [mm] Stroke length (S max), maximum [mm] 5000 Linear speed, maximum [m/s] 5,0 Dynamic carriage load (Fz), maximum [N] 400 Remarks no cover band Page 88 Movopart M M00 Features Can be installed in all directions Self-adjusting stainless steel cover band Patented self-adjusting prism slide guides Wash down and chemical protected versions available M55 M75 M00 Profile size (width height) [mm] Stroke length (S max), maximum [mm] Linear speed, maximum [m/s] 5,0 5,0 5,0 Dynamic carriage load (Fz), maximum [N] Remarks Page
4 Linear Units M-Series Technical Presentation Cover band The self-adjusting magnetically sealed stainless steel cover band protect the unit from the penetration of dirt, dust and liquids. Environmental protection The unit can as standard operate in harsh environments but is also available in wash down or chemically protected versions for the thoughest environments. Belt drive The belt runs on the inside of the profile and can easily be re-tensioned without removing the load from the carriage. Prism slide guides The patented self aligning prism slide guides are accurate, durable and are resistant to vibrations and shock loads. 87
5 M50» Ordering key - see page 23» Accessories - see page 37» Additional data - see page 93 General Specifications Carriage Idle Torque (M idle) [Nm] M50 Input speed [rpm] Idle torque [Nm] Profile size (w h) [mm] , Type of belt Carriage sealing system Adjustable belt tensioning Lubrication GT 5MR-9 none the belt can be retensioned by the customer if necessary lubricated for life M idle = the input torque needed to move the carriage with no load on it. Deflection of the Profile Included accessories none Performance Specifications M50 Stroke length (S max), maximum [mm] 5000 Linear speed, maximum [m/s] 5,0 Acceleration, maximum [m/s 2 ] 40 Repeatability [± mm] 0,2 Input speed, maximum [rpm] 2300 Operation temperature limits [ C] Dynamic load (Fx), maximum < 2,5 m/s > 2,5 m/s [N] Definition of Forces Dynamic load (Fy), maximum [N] 400 Dynamic load (Fz), maximum [N] 400 Dynamic load torque (Mx), maximum [Nm] 5 Dynamic load torque (My), maximum [Nm] 2 Dynamic load torque (Mz), maximum [Nm] 2 Drive shaft force (Frd), maximum [N] 350 Drive shaft torque (Mta), maximum [Nm] 0 Pulley diameter [mm] 4,38 Stroke per shaft revolution [mm] 30 of every 00 mm of stroke of carriage Value for the complete unit 0,7 0,96 0,
6 Linear Units M50 A: depth 8,5 A2: ø6,5 for M6 screw A3: depth 9, Heli coil 89
7 M55» Ordering key - see page 23» Accessories - see page 37» Additional data - see page 93 General Specifications M55 Carriage Idle Torque (M idle) [Nm] Input speed [rpm] Single Carriage Double Carriages Profile size (w h) [mm] , 3,8 Type of belt Carriage sealing system Adjustable belt tensioning Lubrication 22-STD SM5-HP self-adjusting steel cover band the belt can be retensioned by the customer if necessary lubricated for life M idle = the input torque needed to move the carriage with no load on it. Deflection of the Profile Included accessories none Performance Specifications M55 Stroke length (S max), maximum [mm] 7000 Linear speed, maximum [m/s] 5,0 Acceleration, maximum [m/s 2 ] 40 Repeatability [± mm] 0,2 Input speed, maximum [rpm] 2850 Operation temperature limits [ C] Dynamic load (Fx), maximum < 2,5 m/s > 2,5 m/s [N] Definition of Forces Dynamic load (Fy), maximum [N] 400 Dynamic load (Fz), maximum [N] 400 Dynamic load torque (Mx), maximum [Nm] 9 Dynamic load torque (My), maximum [Nm] 2 Dynamic load torque (Mz), maximum [Nm] 2 Drive shaft force (Frd), maximum [N] 200 Drive shaft torque (Mta), maximum [Nm] 7 Pulley diameter [mm] 33,42 Stroke per shaft revolution [mm] 05 of every 00 mm of stroke of carriage Value for the complete unit 4,0 0,4,0 90
8 Linear Units M55 A: depth 0, Heli coil A2: lubrication holes A3: ø9,5/ø5,5 for socket head cap screw M5 A4: depth 7,5, Heli coil Double Carriages M55 Minimum distance between carriages (Lc) [mm] 200 Dynamic load (Fy), maximum [N] 600 Dynamic load (Fz), maximum [N] 600 Dynamic load torque (My), maximum [Nm] Lc 0,3 Dynamic load torque (Mz), maximum [Nm] Lc 0,3 Force required to move second carriage [N] 35 Ordering length (L order) [mm] S max + Lc Total length (L tot] [mm] L order + 53 of carriages Value in mm 6,00 2,20 9
9 M75» Ordering key - see page 23» Accessories - see page 37» Additional data - see page 93 General Specifications M75 Carriage Idle Torque (M idle) [Nm] Input speed [rpm] Single Carriage Double Carriages Profile size (w h) [mm] ,2 4,0 Type of belt Carriage sealing system Adjustable belt tensioning Lubrication STD5-40 self-adjusting steel cover band the belt can be retensioned by the customer if necessary lubricated for life M idle = the input torque needed to move the carriage with no load on it. Deflection of the Profile Included accessories none Performance Specifications M75 Stroke length (S max), maximum [mm] 2000 Linear speed, maximum [m/s] 5,0 Acceleration, maximum [m/s 2 ] 40 Repeatability [± mm] 0,2 Input speed, maximum [rpm] 2300 Operation temperature limits [ C] Dynamic load (Fx), maximum < 2,5 m/s > 2,5 m/s [N] Definition of Forces Dynamic load (Fy), maximum [N] 485 Dynamic load (Fz), maximum [N] 485 Dynamic load torque (Mx), maximum [Nm] 49 Dynamic load torque (My), maximum [Nm] 85 Dynamic load torque (Mz), maximum [Nm] 85 Drive shaft force (Frd), maximum [N] 600 Drive shaft torque (Mta), maximum [Nm] 30 Pulley diameter [mm] 4,38 Stroke per shaft revolution [mm] 30 of every 00 mm of stroke of carriage Value for the complete unit 6,30 0,67,
10 Linear Units M75 A: depth 9, Heli coil A2: lubrication holes A3: ø3,5/ø8,5 for socket head cap screw M8 A4: depth 8, Heli coil Double Carriages M75 Minimum distance between carriages (Lc) [mm] 250 Dynamic load (Fy), maximum [N] 2227 Dynamic load (Fz), maximum [N] 2227 Dynamic load torque (My), maximum [Nm] Lc,4 Dynamic load torque (Mz), maximum [Nm] Lc,4 Force required to move second carriage [N] 40 Ordering length (L order) [mm] S max + Lc + 35 Total length (L tot] [mm] L order + 53 of carriages Value in mm 9,50 3,
11 M00» Ordering key - see page 23» Accessories - see page 37» Additional data - see page 93 General Specifications M00 Carriage Idle Torque (M idle) [Nm] Input speed [rpm] Single Carriage Double Carriages Profile size (w h) [mm] ,8 5,8 Type of belt Carriage sealing system Adjustable belt tensioning Lubrication STD8-50 self-adjusting steel cover band the belt can be retensioned by the customer if necessary lubricated for life M idle = the input torque needed to move the carriage with no load on it. Deflection of the Profile Included accessories none Performance Specifications M00 Stroke length (S max), maximum [mm] 2000 Linear speed, maximum [m/s] 5,0 Acceleration, maximum [m/s 2 ] 40 Repeatability [± mm] 0,2 Input speed, maximum [rpm] 700 Operation temperature limits [ C] Dynamic load (Fx), maximum < 2,5 m/s > 2,5 m/s [N] Definition of Forces Dynamic load (Fy), maximum [N] 3005 Dynamic load (Fz), maximum [N] 3005 Dynamic load torque (Mx), maximum [Nm] 7 Dynamic load torque (My), maximum [Nm] 279 Dynamic load torque (Mz), maximum [Nm] 279 Drive shaft force (Frd), maximum [N] 000 Drive shaft torque (Mta), maximum [Nm] 45 Pulley diameter [mm] 56,02 Stroke per shaft revolution [mm] 76 of every 00 mm of stroke of carriage Value for the complete unit,0,6 2,
12 Linear Units M00 A: Depth 9, Heli coil A2: lubrication holes A3: ø7/ø0,5 for socket head cap screw M0 A4: depth 0, Heli coil A5: 70 (L order <= m), 270 (L order > m) A6: 86 (L order < = m), 436 (L order > m) Double Carriages M00 Minimum distance between carriages (Lc) [mm] 350 Dynamic load (Fy), maximum [N] 4508 Dynamic load (Fz), maximum [N] 4508 Dynamic load torque (My), maximum [Nm] Lc 2,254 Dynamic load torque (Mz), maximum [Nm] Lc 2,254 Force required to move second carriage [N] 45 Ordering length (L order) [mm] S max + Lc Total length (L tot] [mm] L order + 56 of carriages Value in mm 7,40 4,
96
96 www.danahermotion.com Linear Units Linear Units with Belt Drive and Wheel Guide SpeedLine, ForceLine Velocity Noise Acceleration Maintenance Repeatability Cost Force Guide Robustness Load Torque Stiffness
More information110
110 www.danahermotion.com Linear Units Linear Lifting Units SpeedLine, Movo Z Developed for lifting applications Telescopic models available Models with ball screw or belt drive Load up to 750 kg High
More information124
124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High
More informationLinear Motion. Optimized.
Thomson - Linear Motion. Optimized. Linear Motion. Optimized. Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least expensive option. Rather, the
More informationLinear Motion Systems with Belt Drive and Ball Guide
Linear Motion Systems with Belt Drive and Ball Guide Overview SpeedLine WH WH40 Features Can be installed in any orientation Stroke up to 2 m Acceleration up to 40 m/s 2 Compact Parameter WH40 Profile
More informationMovopart M50. Installation and Service Manual Edition: 2 DW110242gb-0446
Movopart M50 GB Installation and Service Manual Edition: 2 DW110242gb-0446 1. Installation 1.1 Mounting of the unit OK 1.2 Maximum distance between mounting points Fz Fz [N] 350 300 Deflection too high
More informationLinear Motion Systems
Linear Motion Systems Thomson - the Choice for Optimized Motion Solutions Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least expensive option.
More informationLinear Motion Systems Toll Free Phone: Toll Free Fax:
Linear Motion Systems Thomson - the Choice for Optimized Motion Solutions Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least expensive option.
More informationLinear Motion Systems
Linear Motion Systems www.thomsonlinear.com Thomson - the Choice for Optimized Motion Solutions Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least
More informationAutomation Components
www.linearactuators.com Automation Components M o v o Z M o v o p a r t A c c u s l i d e S u p e r s l i d e M i c r o s t a g e P r e c i s i o n A c t u a t o r s GB. 1 0 1 2 3 4 5 6 7 8 9 10 11 12
More informationLAP4, LAP8. Pneumatic linear drive sizes 4 and 8
Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding
More informationMTB 42 Belt Driven Linear Actuator
LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features
More informationWIESEL POWERLine and WIESEL DYNALine with ball screw drive Innovative solutions, down to the very last detail.
WIESEL POWERLine and WIESEL DYNALine with ball screw drive Innovative solutions, down to the very last detail. WIESEL POWERLine WM40 The linear drive unit for miniaturized applications. High performance
More informationLinear Units with Belt Drive and Wheel Guide
Linear Units with Belt Drive and Wheel Guide Overview SpeedLine WH WH80 Features Can be installed in any orientation Speed up to 11 m/s Acceleration up to 40 m/s 2 Stroke up to 11 m Parameter WH50 WH80
More informationPC-Series Precision Linear Actuators. Optimize Your Machine and Save Energy With Reliable, High Performance, Compact Actuators
PC-Series Precision Linear Actuators Optimize Your Machine and Save Energy With Reliable, High Performance, Compact Actuators Make the Change to Electric Enjoy superior performance and save time and energy
More informationMT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR
MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES
More informationLM-P608 Portal Axis. Features. Versions
The LM-P608 portal axis is the universally suitable axis from our linear axis program. With a profile cross section of 80 x 80mm and a permissible load of up to 60 kg it meets the demands of the applications
More informationBetter. Faster. Smarter.
Better. Faster. Smarter. Thomson has the products and know-how to help you design equipment that is better, faster, smarter. In a modern production environment, moving material quickly, accurately and
More informationNews on a classic: Mechanical linear drive unit WIESEL BASELine
News on a classic: Mechanical linear drive unit WIESEL BASELine www.danahermotion.com As of September 2004 WIESEL BASELine A classic is rediscovered. The new mechanical linear drive units. WB40 WB60 A
More informationELECTRIC AXIS ELEKTRO SVAK SERIES ACTUATORS
ELECTRIC AXIS ELEKTRO SVAK SERIES 1 ELECTRIC AXIS ELEKTRO SVAK SERIES This belt-driven rodless electric actuator is characterised by the fact that the motor and reducer unit is integral with the carriage,
More informationPrecision Linear Actuators
www.thomsonlinear.com Precision Linear Actuators Thomson the Choice for Optimized Motion Solutions Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the
More informationORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
More informationWIESEL SPEEDLine WHZ80 with roller guideway and AT toothed belt
WIESEL WHZ80 with roller guideway and AT toothed belt All figures shown in millimeters. Note: Mounted wipers on request. The use of a long power bridge increases the total length. Technical data Linear
More informationRoller guide actuator/guides - SQ /SQZ
Roller guide actuator/guides - SQ /SQZ Timing-belt unit with optimum connecting options due to slots in guide profile/carriage Fixing slots 9Easy 9 fixing of linear actuator 9Simple 9 connection of accessories
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)
LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP)
RE-CIRCULATING BALL BEARING (SERIES ) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. More than one carrier per rail can
More informationCatalogue. Portal Axes PAS
Catalogue Portal xes PS Portal xes PS Table of Content Product Description............................... 2 Ballscrew axes.................................... Product description.............................
More informationMax. particle size 5 µm. Pressure for determining piston forces. Materials:
Rodless cylinders Rodless cylinder 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³
More informationBall rail actuator/guide - RK DuoLine Z/R
Ball rail actuator/guide - RK DuoLine Z/R All-round talent with protected guide system Fixing slots in the guide profile and carriage 9Simple 9 connection of accessories 9Excellent 9 fixing options for
More informationMovopart M50 Installation and Service Manual Edition: 2 DW110242gb-0446
www.linearactuators.com Movopart M50 GB Installation and Service Manual Edition: 2 DW110242gb-0446 1. Installation 1.1 Mounting of the unit OK 1.2 Maximum distance between mounting points Fz Fz [N] 350
More informationActuator Units NEW All-in-one-solution
Actuator Units NEW All-in-one-solution Axis Servo Motor Amplifier Actuator Units Economy Series ES4 p. 06-07 ES6 p. 08-09 EC3 p. 10-11 EC4 p. 12-13 LM Guide Actuator KR26 p. 16-17 KR33 p. 18-19 Linear
More informationPrecision Linear Actuators
Precision Linear Actuators Linear Motion. Optimized. T Series Introduction The proven design of the T series precision linear actuators has found its way into thousands of applications throughout the world.
More informationRODLESS MECHANICAL CYLINDERS
RODLESS MECHANICAL CYLINDERS RODLESS MECHANICAL CYLINDRES WITH BALL-SCREW DRIVE, CMH CMH: A rodless cylinder whose carriage is positioned by the movement of nuts attached to a baliscrew. Each carriage
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL)
LL RE-CIRCULATING BALL BEARING (SERIES LL) Patented re-circulating ball bearing guide system. Excellent price / performance ratio. Several T-nut mounting options. Optional mounting accessory kits are available.
More informationSERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More informationRoller guide actuators - SQ ZST
Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple
More informationCOMPACT UNIVERSAL SLIDES
COMPACT UNIVERSAL SLIDES English edition 168 COMPACT UNIVERSAL SLIDES KUS CONTENTS PRODUCT DESCRIPTION 170 172 COMPACT UNIVERSAL SLIDES 173 CALCULATION PRINCIPLES/ ASSEMBLY INSTRUCTIONS 17 176 Lx Mz Kx
More informationActive and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Page Overview 51-52 Standard cylinder with Active brake 53-56 Plain bearing SLIDELINE with Active brake 33-34 Aluminium roller guide PROLINE
More informationA5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK
BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK Belt-driven rodless electric axis with a V-Lock interface. The structure features an extremely lightweight yet high-strength anodised aluminium extruded
More informationActive and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Data Sheet No. Page Overview P-1.42.001E 69-70 Standard cylinder with Active brake P-1.42.002E 71-74 Plain bearing SLIDELINE with Active brake
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationUltra Series: Crossed Roller Ultra Precision Stages
Ultra Series: Crossed Roller Ultra Precision Stages Bayside Motion Group, has developed Ultra Positioning Stages for applications requiring the ultimate in accuracy. Available with a linear motor, ball
More informationModular Electric Actuators OSP-E ORIGA SYSTEM PLUS
Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Sizing Performance Overview Maximum Loadings Sizing of Actuator The following steps are recommended for selection : 1. Check that maximum values in the
More informationLinear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
More informationML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR LOW COST SOLUTION FOR PRECISION POSITIONING IN COMPACT SPACES!
ML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR Compact and easy to install, a low cost linear solution perfectly suited for the medical industry, life science and small scale automation applications.
More informationOSPE..BHD Belt-Driven Actuators
OSPE..BHD Belt-Driven Actuators Actuators for High-Speed, Long Travel, Heavy Duty Applications The OSPE..BHD is the highest capacity belt-driven actuator in the OSPE family. The integrated ball bearing
More informationELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS
ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS
More informationSNR, YOUR GUIDE TO LINEAR MODULES
SNR, YOUR GUIDE TO LINEAR MODULES A bearing manufacturer known across the world For almost a century NTN-SNR has been focusing on the development, design and manufacture of bearings. Today NTN-SNR has
More informationLinear Guides Series OSP-E
Linear Guides Series OSP-E NEW Contents Description Data Sheet No. Page Overview 1.40.020E 101-102 Plain Bearing SLIDELINE 1.40.021E 103-104 Roller Guide POWERSLIDE 1.40.022E 105-108 Aluminium Roller Guide
More informationInnovation & Excellence. Index. Index. Innovation & Excellence. Introduction. Our Solutions 4-5. MLE / MLZ Series iron core motor
Index Innovation & Excellence Introduction 3 Our Solutions 4-5 MLE / MLZ Series iron core motor 6-7 MLE 2 Linear Units 8-9 MLE 3 Linear Units 10-11 Index MLE 5 Linear Units MLE 7 Linear Units MLZ 2 Linear
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-33 Dimensions 34 Order Instructions 35
More informationPAGE 6 PAGE 11 PAGE 17 PAGE 23. Product groups. Light weight overhead rail system - Movorail. High speed overhead rodless actuators - Tollobelt
Handling Components Product groups Light weight overhead rail system - Movorail Low weight means easy to handle and install Five basic sizes Can handle loads up to 600 kg Anodised aluminium profiles Quick
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation
More informationLinear Guides Series OSP-E
Linear Guides Series OSP-E NEW Contents Description Page Overview 101-102 Plain Bearing SLIDELINE 103-104 Roller Guide POWERSLIDE 105-108 Aluminium Roller Guide PROLINE 109-111 Heavy-duty guide HD 113-115
More informationCompact Series. Linear Guide Systems BEARING OPTIONS DRIVE TYPE FLEXIBILITY COMPACT. Plain or Ball Bearing Linear Guides
Compact Series MECHATRONICS ENABLED Linear Guide Systems BEARING OPTIONS Plain or Ball Bearing Linear Guides DRIVE TYPE FLEXIBILITY Integrated Stepper Motor Motor Mount Manual COMPACT 23 mm Low Profile
More informationlinear units control in motion
linear units control in motion by 2 Almotion b.v. Nijverheidsweg 14 6662 NG ELST (Gld.) The Netherlands +31 488 480858 +31 488 481 1 65 info@almotion.nl www.almotion.nl www. lineair.nl www.lineairegeleiding.nl
More informationProfile guide/actuator - RK Compact
Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationM/46800/M, M/46800/HM, M/46800/PM
External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance
More informationModel 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz)
6AXX 10-20 - 17 Model 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz) Interface s 6-axis load cell measures forces simultaneously in three mutually perpendicular axes and three simultaneous torques about
More informationMax. particle size 5 µm. Pressure for determining piston forces. Materials:
1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining
More informationndustr SNR our guide to linear modules
ndustr SNR our guide to linear modules SNR A bearing manufacturer known across the world For almost a century SNR has been focusing on the development, design and manufacture of bearings. Today SNR has
More informationLinear Guides Series OSP-P
Linear Guides Series OSP-P NEW Contents Description Page Overview 31-32 Plain bearing guide SLIDELINE 33-34 Roller guide POWERSLIDE 35-38 Aluminium roller guide PROLINE 39-40 Recirculating ball bearing
More informationRACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
More informationSizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 206 Series 5E electromechanical axis New Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high dynamics
More informationLINEAR UNITS CT & MT
LINEAR UNITS CT & MT Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right
More informationAny reproduction, even partial, is allowed only by written permission by Rollco.
LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
More informationToothed belt axes DGE
Toothed belt axes DGE Toothed belt axes DGE Key features At a glance Precision, rigid guide Highly adaptable, thanks to wide choice of mounting and attachment options Wide range of options for attaching
More informationLinear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
More informationaluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm)
Technical Data Versions for pneumatic linear drive: Series OSP-P aluminum guide carriage Roller Guide Powerslide Loads, Forces and Moments aluminum clamping rail hardened steel rail roller cover with wiper
More informationM/146000, M/146100, M/146200
LINTR PLUS rodless cylinders Magnetic piston and non-magnetic piston Double acting Ø 3 to 50 mm New lightweight design extrusion with universal mounting grooves Proved and patented sealing system Dust
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationInterchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE
Interchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE 02 LINTRA PLUS LINTRA PLUS RELIABLE, DURABLE & PROVEN LINTRA Plus builds on the well-proven reputation of Norgren s existing
More informationM/146000/EX, M/146100/EX, M/146200/EX, LINTRA PLUS cylinder Magnetic & Non-magnetic piston, double acting
M/46000/X, M/4600/X, M/4600/X, LINTR PLUS cylinder > Ø 6... 80 mm > New lightweight design extrusion with universal mounting grooves > Proved and patented sealing system > Interchangeability with series
More informationA44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting
> > Ø 25... 40 mm > > New compact, spacesaving design > > Proven sealing system > > Integral switch mounting > > uffer or adjustable cushioning > > Standard foot mountings Technical features Medium: Compressed
More informationContents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
More informationScrew Driven automation tables
automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationRACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
More informationLM SERIES LINEAR MODULE
LM SERIES LINEAR MODULE THE LM RODLESS LINEAR ACTUATOR RACO s LM Linear Modules are lightweight positioning elements, which can be easily configured into a wide variety of multiple axis motion systems.
More informationThe new performance class...
The new performance class... 10/2017 EP(X)-II 30/40 EP(X)-II 30/40 twin tube actuator The latest generation of twin tube units Move-Tec EP(X)-II 30/40 Your application takes centre stage slow langsam A
More informationPassive guide axes DGC-FA, without drive
Key features At a glance Driveless linear guide units with guide and freely movable slide The passive guide axis is designed to support force and torque capacity in multi-axis applications Higher torsional
More informationHigh Speed Automation HZR Series za30
zla5 HZR Series za3 Features Designed as a vertical axis unit Load lifting capacities up to 15 kg Velocity up to 1 meters/sec. Positional repeatability of ±,2 mm Torsion-resistant housing Roller wheel
More informationORIGA SYSTEM PLUS OSP-P
ORIGA SYSTEM PLUS OSP-P The ORIGINAL rodless pneumatic cylinders A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility. The
More informationOur Mission. Our Brand Promise
M O D U L A R A C T U A T O R S P R O D U C T w w w. n o o k i n d u s t r i e s. c o m G U I D E Our Mission Our mission is to be an innovative and responsive organization. Nook Industries knowledge and
More informationRodless cylinders. Series General. Construction characteristics. Technical characteristics. Use and maintenance
Series 1600 Rodless cylinders General The purpose of producing a rodless cylinder is to provide a space saving option over conventional cylinders. On a traditional rod type cylinder, the total space occupied
More informationM/46900/IA, M/46900/M
TWIN-LINTR Rodless Cylinders Non-magnetic and Magnetic Piston Double acting Ø 25 and 4 mm Double stroke compared with conventional cylinders Design covered by patent Maximum stroke length from minimal
More informationhighlights Double tube linear actuators
highlights GN 491 with right or left hand thread, single slider 3 Type R1 Right hand thread, single shaft end R2* Right hand thread, two shaft ends L1* Left hand thread, single shaft end L2* Left hand
More informationPRUT series - Rodless cylinder
series - cylinder Operating specification and Ordering expression Internal structure PRU PRF Theoretical force Bore size mm Action Piston area cm² 2.0 3.1 4.9 8.0 12.5 Unit : kgf Air pressure ( kgf / cm²
More informationOSP-P Series. Actuator Products Rodless Cylinders. Operating information. Material specifications. Features. Weight (mass) Size Comparison
Standard Features: Double-acting with adjustable cushions With magnetic piston for position sensing Standard stroke lengths to 6000mm. Long stroke versions available upon request End cap can be rotated
More informationToothed belt axis EGC-TB-KF, EGC-HD-TB. Operating instructions c [ ]
Toothed belt axis EGC-TB-KF, EGC-HD-TB en Operating instructions 8076268 2017-11c [8076270] Translation of the original instructions Symbols: Warning Installation and commissioning may only be performed
More informationSimplus
Simplus in Latin means Simple. We focus on making direct drive 1 actuators that are simple to use, plus the additional benefits of: small form factor higher performance better reliability 1 direct drive
More informationLinear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
More informationRodless Pneumatic Cylinders Series OSP-P
Rodless Pneumatic Cylinders Series OSP-P System Concepts & Components... 2-5 Technical Data... 7-9 Dimensions... 10-15 Active rakes... 16-19 Accessories (Mounts & Supports)... 20-29 Ordering Information...30
More informationLINEAR TABLES
LINEAR TABLES LINEAR TABLES NIASA'S LINEAR TABLES are translating units that can be easily controlled manually or commanded by CNC. Due to their lightness and ease of application they are very useful elements
More informationPrecision Modules PSK
Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module
More informationPrecision Linear Actuators. Precision Linear Actuators.
Precision Linear Actuators Precision Linear Actuators Danaher Motion - Helping you build a better machine, faster Danaher Corporation combined over 30 industry-leading brands such as Kollmorgen, Thomson,
More informationB3W Rodless Belt Actuator Look for this endurance technology symbol indicating our durability design features The B3W rodless style actuator is design
B3W RODLESS BELT ACTUATOR engineered for long life with LINEAR SOLUTIONS MADE EASY B3W Rodless Belt Actuator Look for this endurance technology symbol indicating our durability design features The B3W
More information