Medium Voltage Catalogue 2013

Medium Voltage Catalogue 2013 D813 SAP.Nr. 198693 1112

Medium Voltage 2013 Data, values and illustrations given in this documentation are correct and reliable according to the current state of our knowledge. They represent however no obligatory characteristic warranty. Such a warranty is made only by our product standards. The user of this product must decide on his own responsibility on its suitability for the intended application. Our liability for these products exclusively depends on our general trading conditions. Changes in the sense of technical progress and misprint reserved. 2013, CEPACK GmbH. All Rights Reserved. Safe connections 2

Page Introduction Cellpack Technology 4 Cable accessories for unscreened cables 24 Cable accessories for screened cables 30 Cable accessories for paper-insulated cables 70 Cable accessories for screened cables according to British Standard 90 Cable accessories for the industries 102 Accessories 106 Index 136 3

Introduction Cable accessories are indispensable components of a cable network which exert a direct influence on its quality. The same level of operational safety must be guaranteed for the accessories as for the cable itself. Due to high operational costs incurred by medium voltage networks, it is necessary to avoid outages. The safe, quick and easy assembly of cable accessories is therefore essential for network reliability. Exceptional innovative solutions are thus required to ensure that excessive demands are not placed on the capabilities of assembly staff. We produce innovative, high-performance cable accessories for medium voltage networks based on the stress control system developed by Cellpack. Cellpack Villmergen Switzerland Cellpack Tiengen Germany Cellpack Radeberg Germany We offer a full range of products for a wide variety of applications using heat shrink, silicone, slip-on, plug-in and cast resin technologies which comply with the standard requirements for energy suppliers and the set industrial norms. The system components of all of our cable accessories are compatible so as to ensure safe and reliable functioning. As a result of intensive testing carried out in our laboratories, as well as numerous type tests carried out in international test facilities, we are able to guarantee an operationally reliable conductor connection, an adequate insulation level and excellent resistance against all environmental influences for all our cable accessories. All our medium voltage products are tested according to DIN VDE 0278, CENEEC HD 629.1, HD 629.2, IEC 60502-4 and comply with IEEE and BS requirements. Cellpack Almere Buiten Netherlands Cellpack udres France Cellpack Barcelona Spain Cellpack Warschau Poland Cellpack Melaka Malaysia Cellpack Singapur Far East 4

Stress control in MV cable accessories Removal of the cable insulation and the outer semi-conducting layer when connecting or terminating medium voltage cables results in damage to the cable structure. In addition to this, the electric field becomes strongly inhomogeneous at particular points. During this process the electric field strength value greatly increases, resulting in a risk of partial discharge, breakdown or spikes. Stress control influences the strong inhomogeneous field distribution at the cable end so as to reduce the high field strengths to a non-critical value. Refractive stress control is the most suitable method for medium voltage cable accessories. It offers the following significant advantages over other methods: eaner stress control element design, enabling the development of compact solutions which are very easy to assemble. Reduced sensitivity to incorrect positioning or incorrect cable preparation, allowing compensation for errors made during assembly. Cellpack Technologie Refractive stress control Refractive stress control influences the electric field by means of a combination of two insulation materials having different dielectric strengths. The insulation material with the higher dielectric constant is placed in the area at which the higher electrical field strength occurs. The use of the term refractive derives from the fact that the process deflects electric field lines which cross the surface of these materials at an angle(see Figure 1). (Fig. 1: Interruption of electric field lines at the point of transition between materials with different dielectric constants) 5

When using the above principle in medium voltage cable accessories, a thin stress control and insulation layer is placed in the region above the strippable edge of the outer semi-conducting layer (for cables with plastic insulation), or above the Hochstädter foil or lead sheath (for cables with paper insulation), or above the core insulation when the cable insulation has been removed. This layer has a considerably higher dielectric constant (εr) than the insulating material of the cable itself. This results in a targeted reduction of the original field strength (see Fig. 2). Cellpack Technologie (Fig. 2: Comparison of lines of equipotentiality in a plastic-insulated cable with the insulation removed, with and without refractive stress control). Stress control element (FSE) In addition to stress control itself, the positioning of the contact surfaces of cable insulation and accessory during assembly is very significant. Trapped air can result in partial discharge even at low voltages, particularly in the area of stress control, resulting in the breakdown of the cable accessory. In order to avoid these problems, we have developed a stress control element (FSE) made from a special silicone rubber, manufactured using injection-moulding. This product owes its uniqueness to its optimised design and to the specific properties of the HTV silicone rubber used. The dimensions of the cylinder body have been carefully selected to ensure that a single stress control element size is compatible with a wide range of medium voltage cable cross-sections. The dimensions of the inner cylindrical area allow the positioning of the FSE on the smallest possible cross-sectional area, where it expands to the correct size, thus exerting a permanent contact ressure on the base. The permanent high elasticity of the silicone ensures that a constant pressure is applied to the contact surface under all operating conditions. The high gas permeability of the special material constitutes a significant advantage. As a result of constant pressure on the contact surface, pockets of air arising during assembly will completely diffuse through the stress control material within a few minutes (Fig. 3). This protects the cable accessory against partial discharge under all operating conditions. (Fig. 3 Disappearance of an air bubble in the gap between the sleeve insulating body and the FSE) 6

Stress control elements can be slid over any cable safely, quickly and easily with the aid of the AH slip-on auxiliary device patented by Cellpack. Cellpack Technologie The slip-on auxiliary device has been designed so as to prevent damage to the inner cylindrical surface of the stress control element during assembly. 7

Hybrid technology Cellpack Technologie Hybrid technology is a modular system developed by Cellpack which combines components made from silicone rubber with high voltage resistant heat shrink products. This renders our cable accessories compatible with all existing medium voltage cable cross-sections and ensures maximum operational reliability. The full product range comprises plug-in straight-through and transition joints, indoor and outdoor terminations for single- and three-core cables, which comply with the standard requirements for energy suppliers and the set industrial norms. We also offer products based on customer specifications. Advantages Our hybrid cable accessories offer a high level of operational safety in addition to the following advantages: Safe, quick and easy installation Compact and space-saving Unlimited shelf life Adaptability 8

Hybrid joint system The main insulation material used in hybrid plug-in straight-through and transition joints consists of a combination of heat-shrink tubing supplied in telescoped form. The insulation materials are manufactured from high-performance polymeric materials with appropriate additives. The resulting joint system can be positioned and heat-shrunk onto the cable cores to be connected from the park position during assembly safely, quickly and easily. Cellpack Technologie The dimensions of the tube are selected to ensure a defined insulation wall thickness for the appropriate voltage level and cable cross-section. Stress control is achieved by slipping the silicone rubber stress control elements onto the prepared cable end using the patented slip-on auxiliary device. A special filling tape possessing exceptionally high dielectric strength and oil-resistant properties is used to restrict the field strength around the connectors and to prevent air pockets. Assembly is safe, quick and easy, due to the compatibility of all system components. Diagram of type CHMSV straight-through joint: 1. Connector 2. Field control tape 3. Joint insulation 4. Stress control element 5. Screen continuity 6. Outer sheath Cable screen continuity for single-core cables is achieved in accordance with current standards by means of a copper braid sleeve, which is connected to the copper wire and/or tape screen using pressure springs. Other types of shielded connections are available upon request. A heat- shrink tube with integrated hot-melt adhesive developed especially for the outer sheath and possessing very high mechanical strength guarantees a reliable seal. 9

Hybrid termination system Stress control within cable terminations is achieved in the same way as for the hybrid joint system- by simply slipping the tried and tested silicone rubber stress control elements onto the cable end, using the patented slip-on auxiliary device. Cellpack Technologie A sealing tape- another well-established product- is wrapped around the cable shielding and the cable lug to provide a reliable seal. A heat-shrink spreader cap with integrated heat-sealing adhesive provides a reliable seal for the connector distributor and the cable sheath in the distribution region of three-core cables. The main insulation material used in terminations is heatshrink tubing, which is manufactured from high-performance tracking resistant polymeric materials. To establish the necessary creepage distances, highly-elastic shields manufactured from tracking resistant silicone rubber are installed on the tubing after shrinking. Once again, the use of the patented slip-on auxiliary device ensures safe, quick and easy assembly. Diagram of type CHE termination: 1. Cable lug 2. Seal 3. Stress control element 4. eakage current-resistant outer tube 5. eakage current-resistant silicone shield 10

Cellpack Technologie The exceptional hydrophobic properties, resistance to leakage current and high elasticity of silicone rubber guarantee sustained operational safety. All materials characterised by exceptionally high resistance to ozone and UV radiation have undergone decades of rigorous testing under challenging climatic conditions and have proven themselves in innumerable installations all over the world. Standard hybrid terminations are designed for challenging climatic conditions and comply with CENEEC and IEC 60816 requirements. 11

Contrax technology All primary components of our Contrax technology system are integrated into a single-piece insulating body. This reduces the number of cable accessory components, greatly simplifying assembly. Its compact, optimised design reduces the associated assembly, storage and transportation costs to the energy supplier. Cellpack Technologie Insulating bodies for joints and terminations are manufactured from high-voltage resistant silicone rubber using a controlled injection process. Rigorous quality control as well as high-voltage component testing during production ensures the technical reliability of all our Contrax cable accessories. Advantages Our Contrax cable accessories offer a high level of operational safety in addition to the following advantages: Safe, quick and easy installation Systems available for all cross sections Compact and space-saving Unlimited shelf life Adaptability 12

Contrax joint system The single-piece insulating body of Contrax plug-in straight-through joints consists of an inner conductive electrode which acts as a Faraday cage around the connector with the main insulating layer above it, and an outer semi-conducting layer. Each joint body comes equipped with an integrated slip-on auxiliary device for easy assembly and the prevention of damage during installation. Cellpack Technologie Diagram of CAM joint body: 1. Connector 2. Single-piece insulating body 3. Stress control element 4. Screen continuity 5. Outer sheath Stress control at the cable end is achieved as above, by simply sliding our tried and tested silicone rubber stress control element onto the prepared cable using the patented slip-on auxiliary device. A special feature of the Contrax joint is that the stress control element is also used to control the electric field on the inner semi-conducting layer of the insulating body at high voltage against the outer semi-conducting layer of the joint body at earth potential. Electric field strength and lines of equipotentiality of type CAM Contrax straight-through joints. 13

The resulting lean and compact design of the joint body has proven to be particularly suited to use in three-core cables, as the joint body can be placed on the prepared core insulation in park position in a safe and simple process. Cable screen continuity is achieved using a copper braid sleeve which is easily connected to the copper wire and/or tape screen using highly-elastic pressure springs. Other types of shielded connections are available to order. Cellpack Technologie Special outdoor protection systems for Contrax plug-in straight-through joints are based on cast resin technology, thus ensuring a reliable seal and high mechanical strength. 14

Contrax termination system Contrax terminations consist of a single-piece insulating body manufactured from a creepage tracking resistant silicone rubber using a quality-controlled injection moulding process. The stress control element and necessary shields are also integrated into the insulating body. The compact optimised design minimises assembly, storage and transportation costs to energy suppliers. The silicone rubber used is characterised by excellent resistance against ozone and UV radiation, as well as exceptional hydrophobic properties. Its unique design has undergone years of rigorous testing under challenging climatic conditions. Contrax terminations are designed for challenging climatic conditions and thus comply with CENEEC and IEC 60815 requirements. Cellpack Technologie Diagram of type CAE termination: 1. Cable lug 2. Seal 3. Single-piece insulating body with integrated stress control element Construction of Contrax terminations Hydrophobic properties of the silicone used 15

Assembly is carried out in a single-step process, in which the single-piece body is safely, quickly and easily slid onto the prepared cable end using the patented slip-on auxiliary device. Cellpack Technologie A silicone spreader cap using special cold-shrink technology, patented by Cellpack, and silicone tubes with an integrated slip-on auxiliary device are used in the distribution region of three-core cable, ensuring simple and accurate assembly. A special sealing tape provides a reliable seal at the cable shielding and around the cable lug. 16

Plug-in technology Plug-in technology consists of four components- the conductor connection, main insulation, stress control element and outdoor protection system- which are combined to form a single element. Cellpack Technologie This integrated system developed by Cellpack maximises the reduction of assembly, storage and transportation costs to energy suppliers. Compax and Cellplux plug-in connection technologies are the result of over 5 years of work in product development and constitute a perfect connection system for medium-voltage networks. Can be installed safely, quickly and easily Systems available for all cross sections Integrated system components Compact and space-saving Unlimited shelf life Tested and approved in accordance with CENEEC HD 629.1 Comprehensive quality control carried out in accordance with ISO 9001 as well as electrical component checks during production ensure the technical reliability of all our plug-in cable accessories. 17

Compax plug-in straight-through joint This joint has been especially developed for connecting plastic-insulated medium voltage single-core cables. All system components are compatible to ensure that assembly is extremely safe, quick and easy. Cellpack Technologie This innovative integration concept allows for much of the assembly process, previously carried out on-site, to be performed under controlled conditions and subjected to electrical testing at the Cellpack factory. Only a few assembly steps remain to be performed on-site. Advantages: Safe, quick and easy assembly Only standard tools required Suitable for use in confined spaces Products available for all cross sections Robust design Reduction in storage and transportation costs Unlimited shelf-life 18

Insulation materials The insulation materials in the CKM joint are equipped with exceptional electrical and mechanical properties and are manufactured from high voltage- resistant silicone rubber in a controlled injection moulding process. Each individual material component has been subjected to years of extensive electrical and mechanical testing and has proven its reliability over decades of application. Cellpack Technologie 7 6 1 2 3 4 5 Diagram of type CKM straight-through joint 1. Screw connector 2. Joint insulation 3. Insulating support 4. Stress control element 5. Screen continuity 6. Outer sheath 7. Seal Integrated screw connector A unique feature of the Compax connection system is that the insulating body of the joint comes equipped with a tried and tested integrated screw connection system. This screw connector is compatible with all cross-sections and has been designed to guarantee a reliable connection for both copper and aluminium conductors. The optimised design of the contact screws allows the use of a single standard tool for all cross-sections. Integrated field control The CKM joint insulation body comes equipped with the Cellpack refractive stress control system, a device which has been used time and time again by our customers all over the world. This permits the reduction of assembly errors due to poor cable preparation or incorrect positioning of the joint body. Stress control in the connector screw openings is achieved geometrically. 19

Cellplux plug-in connectors Cellplux plug-in cable connection components have been especially developed to connect plasticinsulated medium voltage cables. All system components are compatible to ensure that assembly is extremely safe, quick and easy. Cellpack Technologie This innovative integration concept allows for much of the assembly process, previously carried out on-site, to be performed under controlled conditions and subjected to electrical testing at the Cellpack factory. Only a few assembly steps remain to be performed on-site. Advantages: Cellplux plug-in cable connection components guarantee reliable operational safety and offer the following advantages: High level of operational safety Safe, quick and easy assembly Standard tools may be used Suitable for use in confined spaces Products available for all cross sections Robust design Unlimited shelf life 20

Insulating materials Insulation materials used in Cellplux plug-in cable components possess exceptional electrical and mechanical properties and are manufactured from high voltage resistant EPDM using a controlled injection moulding process. Stress control is achieved by means of the silicone stress control element, offering all the above-mentioned advantages. Each individual material component has been subjected to years of extensive electrical and mechanical testing and has proven its reliability over decades of application. Cellpack Technologie 1. Silicone stress control element 2. Screw-in cable lug with shear bolt screw and integrated bracket 3. Contact bolts with shear bolt screw 4. Inner electrode 5. Main insulation 6. Shielding 7. Screw-in insulating supports with capacitive test point 8. Protective cap 21

Screw-in cable lug and screw-in contact bolts Cellpack Technologie Cellplux plug-in cable components are equipped with a tried and tested screw-in cable lug system, compatible with all cross-sections, which has been designed to guarantee reliable connection for both copper and aluminium conductors. The optimised design of the contact bolts permits the use of a single Monventional tool for assembly across the entire range of cross sections. The shear bolt screw system is also used for CTS screwtype plug-in connection contact bolts connecting the cable lug to the connecting terminal. This eliminates the possibilty of errors during assembly. Stress control This system is also equipped with Cellpack s integrated refractive stress control system, which has a proven track record of reliability. This eliminates the possibility of incorrect cable preparation and dramatically reduces the number of possible assembly errors. Protection from exposed electrical parts Cellplux plug-in cable component shieldingaa is made from conductive EPDM rubber over 3 thick. All products have successfully undergone tests for insulation failure detection. 22

Quality system All production sites have been certified according to ISO 9001, 2008 revision and ISO 14001, 2004 revision. Cellpack Technologie 23

Medium Voltage 2013 For pros by pros 24

Cable accessories for unscreened cables Page Straight-through joints 26 Terminations 28 25

Straight-through joints Medium Voltage 2013 SMH3MS6 Three-core straight-through joint for armoured 3-core polymeric cables without semi-conducting layer up to 7.2 kv SMH3MS6 straight-through joints are suitable for three-core plastic-insulated cables (PVC, PE, XPE, EPR) with no outer semi-conducting layer. They allow the connection of cables with different cross sections, conductive materials and structure. Dimensions = ength Cable accessories for unscreened cables Compact dimensions Wide cross-section range Quick, safe and easy assembly Ready for iediate operation High mechanical strength Indoor Outdoor Underground Water Installation ducts Ductwork Note Connectors not included Storage conditions/shelf life Unlimited shelf life Scope of delivery Thick wall heat-shrinkable outer tubing with hot melt adhesive Inner jacket sleeve Copper braid tube Pressure spring Assembly instructions max. Ø of connector max. connector length Nominal cross section ² ) 3.6/6 (7.2)kV - 3.8/6.6 (7.2)kV 25-70 MS6 850 20 110 25-70 145630 SMH3 50-150 MS6 1000 25 135 50-150 145633 120-300 MS6 1200 40 150 120-300 145635 Appropriate connectors must be ordered separately. 26

Straight-through joints M...MS6 Three-core straight-through joint for armoured 3-core polymeric cables without semi-conducting layer up to 7.2 kv M.MS6 straight-through joints are suitable for three-core plastic-insulated cables (PVC, PE, XPE, EPR) with no outer semi-conducting layer. They allow the connection of cables with different cross sections, conductive materials and structure. They do not contain any substances which inhibit paint wetting and are suitable for use in the automotive industry. Dimensions = ength D = Diameter Quick, safe and easy assembly Resistant to chemical agents ongitudinally and transversely watertight High mechanical strength Indoor Outdoor Underground Water Installation ducts Ductwork Note Connectors not included Scope of delivery Distance sleeve Hydrolysis resistance PUR type EG cast-resin, containing the correct volume ready for mixing. Packed in practical and easy-to-use two chamber bags Transparent plastic moulds Copper braid tube Hose clamp Fill and air-release funnel PVC insulation tape Protective gloves Assembly instructions Cable accessories for unscreened cables Nominal concentric conductor 1 2 D1 D2 D3 Cable-Ø cross section nominal cross section per conductor ² ² ) 3.6/6 (7.2)kV - 3.8/6.6 (7.2)kV M4 MS6 432 384 29 52 90 29-55 25-70 25/25-50/50 124318 M5 MS6 550 503.2 40 62 110 42-65 95-120 70/70-95/95 124319 M6 MS6 660 600 50 78 145 50-78 150-240 120/120-185/185 124320 Appropriate connectors must be ordered separately. 27

Terminations Medium Voltage 2013 SEEV Three-core indoor termination for armoured 3-core polymeric cables without semi-conducting layer up to 7.2 kv Terminations SEEV for indoor applications are suitable to cover armoured three-core polymeric cables (PVC, PE, XPE, EPR) without semi-conducting layer. Dimensions = ength Cable accessories for unscreened cables Compact dimensions Wide conductor and cross-section range High mechanical strength Quick, safe and easy assembly Indoor Note Cable lugs not included Storage conditions/shelf life Unlimited shelf life Scope of delivery Core insulating tubes (tracking resistant) Spreader cap Filling tape Earthing accessories Sealing tape Assembly instructions Appropriate cable lugs must be ordered separately. Nominal cross section ² ) 3.6/6 (7.2)kV - 3.8/6.6 (7.2)kV 16-50 280 16-50 145458 SEEV 70-120 280 70-120 145461 150-240 280 150-240 145464 300-400 280 300-400 171791 28

Terminations SEEV-F Three-core outdoor termination for armoured 3-core polymeric cables without semi-conducting layer up to 7.2 kv Terminations SEEV -F for outdoor applications are suitable to cover armoured three-core polymeric cables (PVC, PE, XPE, EPR) without semi-conducting layer. Dimensions = ength Ø S = Diameter of cable shed Compact dimensions Wide conductor and cross-section range High mechanical strength Quick, safe and easy assembly Outdoor Note Cable lugs not included Storage conditions/shelf life Unlimited shelf life Scope of delivery Core insulating tubes (tracking resistant) Filling tape Silicone sheds Earthing accessories Sealing tape Tracking resistant spreader cap Assembly instructions Cable accessories for unscreened cables U0 ) 3.6/6 (7.2)kV - 3.8/6.6 (7.2)kV SEEV-F Appropriate cable lugs must be ordered separately. Nominal cross section ² Ø S 16-50 400 16-50 80 148152 70-120 400 70-120 85 182390 150-240 400 150-240 85 148153 29

30 Medium Voltage 2013

Medium Voltage 2013 Cable accessories for screened cables Page Straight-through joints for single-core cables 32 Termination for single-core cables 37 Straight-through joints for 3-core cables 59 Termination for 3-core cables 63 Scaling the heights safely 31

Straight-through joints for single-core cables Medium Voltage 2013 CHMSV Single-core straight-through joint with screw connector for all polymeric single-core cables CHMSV straight-through joints are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR). They allow the connection of cables with different cross sections, conductive materials, semi-conducting layers (graphite-coated, removable or strippable) and screening (copper wire or tape). With screw connector. Dimensions = ength Cable accessories for screened cables Reliable stress control due to flexible silicone stress control elements For both copper and aluminium conductors For all cables with copper wire or tape screen Wide conductor and cross-section range Quick, safe and easy assembly Ready for iediate operation Suitable for a wide range of applications due to innovative integrated screw connector Indoor Outdoor Underground Water Installation ducts Ductwork Note Incl. Screw connectors Joints with a range of U m = 12 kv must be used for cables of U m = 7.2 kv. (Check minimum diameter over conductor insulation). min. Ø over conductor insulation after removal of outer semi-conducting layer Heat-shrinkable straight-through joints, larger cross section on request Storage conditions/shelf life Unlimited shelf life Scope of delivery Thick wall heat-shrinkable insulation tubing Thick wall heat-shrinkable outer tubing with hot melt adhesive Silicone stress-control elements Copper braid tube Pressure springs Innovative screw connector with conductive sheath Stress control filling tape (blue) Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 25-95 600 12.6 25-95 258130 CHMSV 12kV 70-150 600 14.7 70-150 258131 95-240 600 17.3 95-240 258132 240-400 650 23.1 240-400 258133 ) 8.7/15 (17.5)kV 25-95 600 14.7 25-95 258135 CHMSV 17kV 70-150 600 18.0 70-150 258136 95-240 600 19.9 95-240 258137 240-400 700 24.0 240-400 258138 ) 12/20 (24)kV - 12.7/22 (24)kV 16-95 600 14.7 16-95 258140 CHMSV 24kV 50-150 600 17.3 50-150 258141 95-240 600 19.9 95-240 258142 240-400 700 27.3 240-400 258143 ) 18/30 (36)kV - 19/33 (36)kV 50-150 600 20.9 50-150 258144 CHMSV 36kV 95-240 600 24.2 95-240 258145 240-400 700 32.0 240-400 258146 32

Straight-through joints for single-core cables CHM Single-core straight-through joint for all polymeric single-core cables CHM straight-through joints are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR). They allow the connection of cables with different cross sections, conductive materials, semi-conducting layers (graphite-coated, removable or strippable) and screening (copper wire or tape). Suitable for compression connectors. Dimensions = ength Reliable stress control due to flexible silicone stress control elements For all cables with copper wire or tape screen Wide conductor and cross-section range Quick, safe and easy assembly Ready for iediate operation Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Joints with a range of U m = 12 kv must be used for cables of U m = 7.2 kv. (Check minimum diameter over conductor insulation). Storage conditions/shelf life Unlimited shelf life Scope of delivery Thick wall heat-shrinkable insulation tubing Thick wall heat-shrinkable outer tubing with hot melt adhesive Silicone stress-control elements Copper braid tube Pressure springs Stress control filling tape (blue) Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Cable accessories for screened cables 33

Straight-through joints for single-core cables Medium Voltage 2013 Cable accessories for screened cables min. Ø over conductor insulation after removal of outer semiconducting layer max. Ø of connector max. connector length Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 10-25 650 9.9 16 90 10-25 194072 35-95 650 12.6 25 135 35-95 194073 95-240 650 17.3 32 145 95-240 194074 CHM 12KV 150-300 700 19.9 40 200 150-300 194075 300-400 700 23.1 40 200 300-400 194076 500-800 850 27.3 60 360 500-800 194077 800-1000 850 36.8 60 360 800-1000 194078 ) 8.7/15 (17.5)kV 35-95 650 12.6 25 135 35-95 194079 70-240 650 17.3 32 145 70-240 194080 CHM 17KV 240-400 700 23.1 40 200 240-400 194082 400-630 850 27.3 60 360 400-630 194083 630-1000 850 36.8 60 360 630-1000 194085 ) 12/20 (24)kV - 12.7/22 (24)kV 10-35 650 12.6 20 100 10-35 193339 50-150 650 17.3 25 135 50-150 193370 CHM 24KV 70-240 700 19.9 32 145 70-240 194086 150-300 700 23.1 40 200 150-300 194087 400-630 850 27.3 60 360 400-630 194088 630-1000 850 36.8 60 360 630-1000 194089 ) 18/30 (36)kV - 19/33 (36)kV 35-70 650 19.9 20 110 35-70 194090 50-150 700 23.1 25 135 50-150 194091 CHM 36KV 150-300 700 27.3 38 200 150-300 194092 300-500 700 27.3 45 200 300-500 194093 500-800 850 36.8 60 360 500-800 194094 Armour continuity kit must be ordered separately. Appropriate compression connector must be ordered separately. 34

Straight-through joints for single-core cables CAM-S Single-core straight-through joint for all polymeric single-core cables CAM-S straight-through joints are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR). They allow the connection of cables with different cross sections, conductive materials, semi-conducting layers (graphite-coated, removable or strippable) and screening (wire or tape screen). Suitable for compression connectors. Dimensions = ength Reliable stress control due to flexible silicone stress control elements Wide conductor and cross-section range Ready for iediate operation Silicone slip-on components for quick, safe and easy assembly Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Joints with a range of U m = 12 kv must be used for cables of U m = 7.2 kv. (Check minimum diameter over conductor insulation). min. Ø over conductor insulation after removal of outer semiconducting layer max. connector length Storage conditions/shelf life Unlimited shelf life Scope of delivery Thick wall heat-shrinkable outer tubing with hot melt adhesive Silicone stress-control elements Silicone joint body with integrated semi-conducting layer (individually tested) Copper braid tube Pressure springs Semi-conducting tape Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² ) 6/10 (12)kV - 6.35/11 (12)kV 25-95 700 12.6 160 25-95 201385 CAM-S 12kV 50-240 700 14.7 160 50-240 201386 150-400 700 19.9 160 150-400 201388 ) 12/20 (24)kV - 12.7/22 (24)kV CAM-S 24kV 16-120 700 14.7 160 16-120 201393 70-240 700 19.9 160 70-240 201395 Appropriate compression connector must be ordered separately. 12kV 24kV Cable accessories for screened cables 35

Straight-through joints for single-core cables Medium Voltage 2013 CKM Single-core straight-through joint with screw connector for all polymeric single-core cables CKM straight-through joints are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated, removable or strippable) and screening (wire or tape screen) up to a maximum network voltage of 24kV. With screw connectors integrated. Dimensions = ength H = Heigth B = Width Cable accessories for screened cables Compact design Quick, safe and easy assembly With integrated screw connectors Ready for iediate operation Resistant to alkaline earth elements Moisture-resistant Corrosion-resistant Superior mechanical properties B Indoor Underground Installation ducts H min. Ø over conductor insulation after removal of outer semi-conducting layer Storage conditions/shelf life Unlimited shelf life Scope of delivery Double plug Joint body with integrated outer housing, inner semi-conducting layer, silicon stress-control element and shear-bolt connector Pressure springs Padding tape Housing cover with integrated seal Protective sleeve with slide-on applicator Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV ) 12/20 (24)kV - 12.7/22 (24)kV 50-150 470 71 85 15.1-28.5 70-150 70-150 50-150 252101 CKM 24kV 95-240 470 71 85 19.9-32.6 120-240 120-240 95-240 251713 36

Termination for single-core cables CHE-I Single-core indoor termination for all polymeric single-core cables CHE-I terminations are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). Dimensions = ength Ø S = Diameter of cable sheds Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Indoor Note Cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). Each unit contains materials for one set of three terminations. Storage conditions/shelf life Unlimited shelf life Scope of delivery 1 Set for 3 phases Tracking-resistant heat-shrink tubing Silicone stress-control elements Silicone sheds Sealing tape Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Cable accessories for screened cables 37

Termination for single-core cables Medium Voltage 2013 Cable accessories for screened cables min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 10-25 300 9.9 10-25 193414 25-95 300 12.6 25-95 193416 95-240 300 17.3 95-240 194017 CHE-I 12kV 150-400 300 19.9 150-400 194018 240-500 300 23.1 240-500 194019 400-800 300 27.3 400-800 194030 800-1000 300 36.8 800-1000 194031 ) 8.7/15 (17.5)kV 10-16 300 9.9 1 80 10-16 194032 16-50 300 12.6 1 80 16-50 194033 70-240 300 17.3 1 85 70-240 194034 CHE-I 17kV 120-300 300 19.9 1 85 120-300 194035 185-400 300 23.1 1 85 185-400 194036 300-630 300 27.3 1 115 300-630 194037 630-1000 300 36.8 1 123 630-1000 194038 ) 12/20 (24)kV - 12.7/22 (24)kV 10-35 300 12.6 1 85 10-35 194039 25-150 300 17.3 1 85 25-150 194040 CHE-I 24kV 70-240 300 19.9 1 85 70-240 194041 120-300 300 23.1 1 85 120-300 194042 240-500 300 27.3 1 115 240-500 194043 630-1000 300 36.8 1 123 630-1000 194044 ) 18/30 (36)kV - 19/33 (36)kV 35-70 500 19.9 2 85 35-70 194045 CHE-I 36kV 50-150 500 23.1 2 85 50-150 194046 150-400 500 27.3 2 115 150-400 194047 500-800 500 36.8 2 123 500-800 194048 Appropriate cable lugs must be ordered separately. EGA earthing kit for cables with tape screen must be ordered separately. 38

Termination for single-core cables CHE-F Single-core outdoor termination for all polymeric single-core cables CHE-F terminations are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). Dimensions = ength Ø S = Diameter of cable sheds Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Outdoor Note Cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). Each unit contains materials for one set of three terminations. Storage conditions/shelf life Unlimited shelf life Scope of delivery 1 Set for 3 phases Tracking-resistant heat-shrink tubing Silicone stress-control elements Silicone sheds Sealing tape Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Cable accessories for screened cables 39

Termination for single-core cables Medium Voltage 2013 Cable accessories for screened cables min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Nominal cross section ² 12kV 17.5kV 24KV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 10-25 300 9.9 1 80 10-25 194049 25-95 300 12.6 1 80 25-95 194050 95-240 300 17.3 1 85 95-240 194051 CHE-F 12kV 150-400 300 19.9 1 85 150-400 194052 240-500 300 23.1 1 85 240-500 194053 400-800 300 27.3 1 115 400-8000 194054 800-1000 300 36.8 1 123 800-1000 194055 ) 8.7/15 (17.5)kV 10-16 500 9.9 2 80 10-16 194056 16-50 500 12.6 2 80 16-50 194057 70-240 500 17.3 2 85 70-240 194058 CHE-F 17kV 120-300 500 19.9 2 85 120-300 194059 185-400 500 23.1 2 85 185-400 194061 300-630 500 27.3 2 115 300-630 194062 630-1000 500 36.8 2 123 630-1000 194063 ) 12/20 (24)kV - 12.7/22 (24)kV 10-35 500 12.6 3 85 10-35 193372 25-150 500 17.3 3 85 25-150 193374 CHE-F 24kV 70-240 500 19.9 3 85 70-240 194064 120-300 500 23.1 3 85 120-300 194065 240-500 500 27.3 3 115 240-500 194066 630-1000 500 36.8 3 123 630-1000 194067 ) 18/30 (36)kV - 19/33 (36)kV 35-70 700 19.9 4 85 35-70 194068 CHE-F 36kV 50-150 700 23.1 4 85 50-150 194069 150-400 700 27.3 4 115 150-400 194070 500-800 700 36.8 4 123 500-800 194071 Appropriate cable lugs must be ordered separately. EGA earthing kit for cables with tape screen must be ordered separately. 40

Termination for single-core cables CAESK-I Single-core indoor termination with screw cable lugs for all polymeric single-core cables CAESK-I terminations are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (wire or tape screen). With screw cable lug. Dimensions = ength Ø S = Diameter of cable sheds Wide cross-section range Silicone slip-on components for quick, safe and easy assembly Ready for iediate operation Indoor Note Incl. Screw cable lugs 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S EGA earthing kit for cables with tape screen must be ordered separately. Storage conditions/shelf life Unlimited shelf life Scope of delivery 3 one-piece slip-on silicone terminations with integrated stress control element Silicone tube Sealing tape Screw cable lug for main conductor Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 95-150 310 17.3 1 87 95-150 289945 CAESK-I 12kV 150-240 330 19.9 1 90 150-240 289947 300-400 340 26.6 1 93 300-400 289948 500-630 360 32.3 1 97 500-630 289949 ) 8.7/15 (17.5)kV 50-95 310 17.3 1 87 50-95 289950 95-150 310 19.9 1 90 95-150 289951 CAESK-I 17kV 150-240 330 23.1 1 93 150-240 289952 240-400 340 27.3 1 97 240-400 289953 400-500 360 32.3 1 97 400-500 289954 ) 12/20 (24)kV - 12.7/22 (24)kV 35-95 310 17.3 1 87 35-95 289955 70-150 310 19.9 1 90 70-150 289956 CAESK-I 24kV 120-240 330 23.1 1 90 120-240 289957 240-400 340 27.3 1 97 240-400 289958 400-500 360 32.3 1 97 400-500 289959 ) 18/30 (36)kV - 19/33 (36)kV 16-95 360 20.9 4 93 16-95 289960 CAESK-I 36kV 70-150 360 24.2 4 93 70-150 289961 120-240 380 28.6 4 97 120-240 289962 240-300 390 32.3 4 97 240-300 289963 Cable accessories for screened cables 41

Termination for single-core cables Medium Voltage 2013 CAE-I Single-core indoor termination for all polymeric single-core cables CAE-I terminations are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (wire or tape screen). Suitable for compression cable lugs. Dimensions = ength Ø S = Diameter of cable sheds Cable accessories for screened cables Wide cross-section range Silicone slip-on components for quick, safe and easy assembly Ready for iediate operation Indoor Note Compression cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Storage conditions/shelf life Unlimited shelf life Scope of delivery 3 one-piece slip-on silicone terminations with integrated stress control element Sealing tape Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 95-240 270 17.3 1 87 95-240 199151 CAE-I 12kV 150-400 270 19.9 1 90 150-400 199152 240-500 270 23.1 1 93 240-500 199154 300-800 270 27.3 1 97 300-800 199155 ) 8.7/15 (17.5)kV 50-185 270 17.3 1 87 50-185 199157 CAE-I 17kV 95-240 270 19.9 1 90 95-240 199158 150-400 270 23.1 1 93 150-400 199159 240-630 270 27.3 1 97 240-630 199160 ) 12/20 (24)kV - 12.7/22 (24)kV 35-120 270 17.3 1 87 35-120 199162 CAE-I 24kV 70-240 270 19.9 1 90 70-240 199163 120-400 270 23.1 1 93 120-400 199164 240-630 270 27.3 1 97 240-630 199165 ) 18/30 (36)kV - 19/33 (36)kV 16-95 325 19.9 4 90 16-95 199166 CAE-I 36kV 50-240 325 23.1 4 93 50-240 199167 120-400 325 27.3 4 97 120-400 199168 Appropriate cable lugs must be ordered separately. Accessories for cables with tape screen must be ordered separately. 42

Termination for single-core cables CAESK-F Single-core outdoor termination with screw cable lugs for all polymeric single-core cables CAESK-F terminations are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (wire or tape screen). With screw cable lug. Dimensions = ength Ø S = Diameter of cable sheds Wide cross-section range Silicone slip-on components for quick, safe and easy assembly Ready for iediate operation min. Ø over conductor insulation after removal of outer semiconducting layer Outdoor Note Incl. Screw cable lugs 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). Number of sheds per phase Ø S EGA earthing kit for cables with tape screen must be ordered separately. Storage conditions/shelf life Unlimited shelf life Scope of delivery 3 one-piece slip-on silicone terminations with integrated stress control element Silicone tube Sealing tape Screw cable lug for main conductor Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 95-150 360 17.3 4 87 95-150 289894 CAESK-F 12kV 150-240 390 19.9 4 90 150-240 289897 300-400 390 26.6 4 93 300-400 289898 500-630 410 32.3 4 97 500-630 289899 ) 8.7/15 (17.5)kV 50-95 360 17.3 4 87 50-95 289900 95-150 360 19.9 4 90 95-150 289901 CAESK-F 17kV 150-240 390 23.1 4 97 150-240 289902 240-400 410 27.3 4 97 240-400 289903 400-500 410 32.3 4 97 400-500 289904 ) 12/20 (24)kV - 12.7/22 (24)kV 35-95 360 17.3 4 87 35-95 289905 70-150 360 19.9 4 90 70-150 289906 CAESK-F 24kV 120-240 390 23.1 4 93 120-240 289907 240-400 410 27.3 4 97 240-400 289908 400-500 410 32.3 4 97 400-500 289909 ) 18/30 (36)kV - 19/33 (36)kV 70-150 470 24.2 5 93 70-150 289910 CAESK-F 36kV 120-240 500 28.6 5 97 120-240 289911 240-300 500 32.3 5 97 240-300 289912 Cable accessories for screened cables 43

Termination for single-core cables Medium Voltage 2013 CAE-F Single-core outdoor termination for all polymeric single-core cables CAE-F terminations are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (wire or tape screen). Suitable for compression cable lugs. Dimensions = ength Ø S = Diameter of cable sheds Cable accessories for screened cables Wide cross-section range Silicone slip-on components for quick, safe and easy assembly Ready for iediate operation Outdoor Note Compression cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Storage conditions/shelf life Unlimited shelf life Scope of delivery 3 one-piece slip-on silicone terminations with integrated stress control element Sealing tape Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 95-240 325 17.3 4 87 95-240 199184 150-400 325 19.9 4 90 150-400 199185 CAE-F 12kV 240-500 325 23.1 4 93 240-500 199186 300-800 325 27.3 4 97 300-800 199187 ) 8.7/15 (17.5)kV 50-185 325 17.3 4 87 50-185 199189 95-240 325 19.9 4 90 95-240 199190 CAE-F 17kV 150-400 325 23.1 4 93 150-400 199191 240-630 325 27.3 4 97 240-630 199192 ) 12/20 (24)kV - 12.7/22 (24)kV 35-120 325 17.3 4 87 35-120 199194 70-240 325 19.9 4 90 70-240 199195 CAE-F 24kV 120-400 325 23.1 4 93 120-400 199196 240-630 325 27.3 4 97 240-630 199197 ) 18/30 (36)kV - 19/33 (36)kV 50-240 440 23.1 5 93 50-240 199198 CAE-F 36kV 120-400 440 27.3 5 97 120-400 199199 Appropriate compression cable lugs must be ordered separately. EGA earthing kit for cables with tape screen must be ordered separately. 44

Termination for single-core cables CWS 250A/M Elbow separable cable connector with capacitive measuring point for all polymeric single-core cables Cellplux elbow separable cable connectors are suitable for the connection of all plastic-insulated single-core cables (PVC,PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated, removable or strippable) and screening (wire or tape screen) to switching equipment and transformers having plug-in connections for A outer cone system terminals (in accordance with EN 50180, EN 50181 and DIN 47636) up to a maximum network voltage of 24 kv. Dimensions with capacitive measuring point Individually tested Outer semi-conducting layer made of semi-conductive EPDM provides protection from exposed electrical parts. Cable sheath insulation fault test may be performed under voltage For both copper and aluminium conductors Quick, safe and easy assembly Suitable for a wide range of applications due to integrated screw cable lug Indoor B H min. Ø over conductor insulation after removal of outer semi-conducting layer = ength H = Heigth B = Width Storage conditions/shelf life Unlimited shelf life Scope of delivery Set of 3 separable cable connectors Silicone stress-control elements Earthing kit Assembly accessories Screw cable lug for main conductor Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV ) 6/10 (12)kV - 12.7/22 (24)kV 16-95 M/EGA 176 80 178 14.7 50-95 25-95 16-95 295167 CWS 250A 24kV 70-150 M/EGA 176 80 178 19.9 120-150 95-150 70-150 293792 Cable accessories for screened cables 45

Termination for single-core cables Medium Voltage 2013 CGS 250A/M Straight separable cable connector with capacitive measuring point for all polymeric single-core cables Cellplux straight separable cable connectors are suitable for the connection of all plastic-insulated single-core cables (PVC,PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (wire or tape screen) to switching equipment and transformers having plug-in connections for A outer cone system terminals (in accordance with EN 50180, EN 50181 and DIN 47636) up to a maximum network voltage of 24 kv. Dimensions = ength B = Width Cable accessories for screened cables with capacitive measuring point Individually tested Outer semi-conducting layer made of semi-conductive EPDM provides protection from exposed electrical parts. Cable sheath insulation fault test may be performed under voltage For both copper and aluminium conductors Quick, safe and easy assembly Suitable for a wide range of applications due to integrated screw cable lug Indoor B min. Ø over conductor insulation after removal of outer semi-conducting layer Storage conditions/shelf life 12 months Unlimited shelf life Scope of delivery Set of 3 separable cable connectors Silicone stress-control elements Earthing kit Assembly accessories Screw cable lug for main conductor Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV ) 6/10 (12)kV - 12.7/22 (24)kV 25-95 M/EGA 248 110 14.7 50-95 25-95 25-95 295283 CGS 250A 24kV 70-150 M/EGA 248 110 19.9 120-150 95-150 70-150 293797 46

Termination for single-core cables CVS 250A Connector element up to 24kV for plug-in cable connector type CWS, CGS The CVS plug-in connector element is suitable for the connection of two elbow and/or straight separable CWS 250A or CGS 250A connectors. Its dimensions correspond to A outer cone systems according to EN 50180, EN 50181 and DIN 47636. Dimensions = ength Ø = Diameter Individually tested Easy assembly Safe and easy to handle Indoor Storage conditions/shelf life Unlimited shelf life Scope of delivery Set of 3 connectors Assembly accessories Assembly instructions Ø D ) 6/10 (12)kV - 12.7/22 (24)kV CVS 24kV 136 100 225844 Cable accessories for screened cables 47

Termination for single-core cables Medium Voltage 2013 CWS 400A Elbow separable cable connector for all polymeric single-core cables Cellplux elbow separable cable connectors are suitable for the connection of all plastic-insulated single-core cables (PVC,PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (wire or tape screen) to switching equipment and transformers having plug-in connections for B outer cone system terminals (in accordance with EN 50180, EN 50181 and DIN 47636) up to a maximum network voltage of 36 kv. Dimensions = ength H = Heigth B = Width Cable accessories for screened cables Outer semi-conducting layer made of semi-conductive EPDM provides protection from exposed electrical parts. Cable sheath insulation fault test may be performed under voltage For both copper and aluminium conductors Quick, safe and easy assembly Suitable for a wide range of applications due to integrated screw cable lug With capacitive measurement Individually tested B Indoor H min. Ø over conductor insulation after removal of outer semi-conducting layer Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 12.7/22 (24)kV 25-70 EGA 215 107 250 14.7 50-95 25-95 25-70 250720 CWS 400A 24kV 95-240 EGA 215 107 250 22.0 150-240 120-240 95-240 246176 ) 12/20 (24)kV - 19/33 (36)kV 50-95 EGA 215 107 250 22.0 95-95 50-95 250726 CWS 400A 36kV 150-240 EGA 215 107 250 30.8 240-240 150-240 247102 EGA earthing kit for cables with tape screen must be ordered separately. Storage conditions/shelf life Unlimited shelf life Scope of delivery Set of 3 separable cable connectors Silicone stress-control elements Earthing kit Assembly accessories Screw cable lug for main conductor Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) 48

Termination for single-core cables CTS 630A T-separable cable connector for all polymeric single-core cables CTS shear bolt Cellplux separable cable connectors are suitable for connecting all plastic-insulated single-core cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (wire or tape) to substations and transformers for a maximum system voltage of 36 kv, with plug-type connections for C Taper Male Plug System complying with EN 50180 and EN 50181. Dimensions = ength H = Heigth B = Width Individually tested Outer semi-conducting layer made of semi-conductive EPDM provides protection from exposed electrical parts. Cable sheath insulation fault test may be performed under voltage For both copper and aluminium conductors Quick, safe and easy assembly Suitable for a wide range of applications due to integrated screw cable lug With capacitive measurement Indoor B H min. Ø over conductor insulation after removal of outer semi-conducting layer Storage conditions/shelf life Unlimited shelf life Scope of delivery Set of 3 separable cable connectors Silicone stress-control elements Earthing kit Assembly accessories Screw cable lug for main conductor Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 12.7/22 (24)kV 25-70 EGA 194 85 250 14.7 50-95 25-95 25-70 250711 CTS 630A 24kV 95-240 EGA 194 85 250 22 150-240 120-240 95-240 220775 240-300 EGA 194 85 250 23.7 240-400 240-300 240-300 302732 ) 12/20 (24)kV - 19/33 (36)kV 50-95 EGA 194 85 250 22 95-95 50-95 250715 CTS 630A 36kV 95-150 EGA 194 85 250 22 95-240 95-150 256010 150-240 EGA 194 85 250 30.8 240-240 150-240 224826 240-400 EGA 194 85 265 31.5 300-400 240-400 256328 EGA earthing kit for cables with tape screen must be ordered separately. More T-socket connexions on request Cable accessories for screened cables 49

Termination for single-core cables Medium Voltage 2013 CTKS 630A T-separable coupling connector for all polymeric single-core cables The CTKS coupling connectors are suitable for connecting all plastic-insulated single-core cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (wire or tape), to the back of Cellplux separable cable connectors, model CTS 630 A. Dimensions = ength B = Width Cable accessories for screened cables Outer semi-conducting layer made of semi-conductive EPDM provides protection from exposed electrical parts. Cable sheath insulation fault test may be performed under voltage For both copper and aluminium conductors Quick, safe and easy assembly Suitable for a wide range of applications due to integrated screw cable lug With capacitive measurement Individually tested Indoor Storage conditions/shelf life Unlimited shelf life Scope of delivery Set of 3 coupling elements Silicone stress-control elements Earthing kit Assembly accessories Screw cable lug for main conductor Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) min. Ø over conductor Nominal cross section insulation after ² B H removal of outer semi-conducting layer 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 12.7/22 (24)kV CTKS 630A 24kV 25-70 EGA 290 74 250 14.7 50-95 25-95 25-70 256838 95-240 EGA 290 74 250 22 150-240 120-240 95-240 256839 ) 12/20 (24)kV - 19/33 (36)kV CTKS 630A 36kV 50-95 310 85 250 22 95-95 50-95 257581 150-240 310 85 250 30.8 240-240 150-240 257582 EGA earthing kit for cables with tape screen must be ordered separately. 50

Termination for single-core cables CTKSA Coupling Surge Arrester Class 1 The CTKSA Surge Arrester is designed for the protection of encapsulated medium voltage installations with a maximum operating voltage of 24 kv. Its compact design allows direct connection to double-row CTS 630A screw plugs and complies with International Standard IEC 60099-4. Individually tested Protection from exposed electrical parts by EPDM outer protection Quick, safe and easy assembly Protection from exposed electrical parts With capacitive measurement System overvoltage (per unit of MCOV) Indoor Note Each unit contains materials for one set of three plugs Scope of delivery Set of three surge arresters, electrically tested Assembly accessories Secondary components Assembly instructions Maximum ambient temperature: 60 C (Per unit of Ur) Cable accessories for screened cables Time (seconds) CTKSA 12kV CTKSA 17kV CTKSA 19.5kV CTKSA 24kV 262054 262055 262816 262056 Nominal leakage current I [ka] 10 10 10 10 Rated voltage Ur [kv] 15 21 24 30 Maximum Operating Voltage Uc [kv] 12.7 17 19.5 24 Partial discharge at Uc [pc] < 5 < 5 < 5 < 5 Residual voltage [kv] at: Steep current impulse 1/20 μs 41.8 58.5 66.9 83.5 Switching impulse current 125A 28.2 39.4 45.1 56.5 Switching impulse current 500A 30.1 42.2 48.2 60.3 ightning impulse current 8/20 μs 37.6 52.6 60.2 75.5 51

Termination for single-core cables Medium Voltage 2013 CTKSA Coupling Surge Arrester Class 2 The CTKSA Surge Arrester is designed for the protection of encapsulated medium voltage installations with a maximum operating voltage of 34 kv. Its compact design allows direct connection to double-row CTS 630A screw plugs and complies with International Standard IEC 60099-4. Cable accessories for screened cables Individually tested Protection from exposed electrical parts by EPDM outer protection Quick, safe and easy assembly Protection from exposed electrical parts System overvoltage (per unit of Uc) Indoor Note Each unit contains materials for one set of three plugs Scope of delivery Set of three surge arresters, electrically tested Assembly accessories Secondary components Assembly instructions Maximum ambient temperature: 60 C (Per unit of Ur) Time (seconds) CTKSA 34kV 301492 Nominal leakage current I [ka] 10 Rated voltage Ur [kv] 42 Maximum Operating Voltage Uc [kv] 34 Partial discharge at Uc [pc] < 5 Residual voltage [kv] at: Steep current impulse 1/20 μs 120.4 Switching impulse current 250A 84 Switching impulse current 500A 89.6 ightning impulse current 8/20 μs 108.4 52

Termination for single-core cables CIK Voltage-proof Insulating Cap The CIK Voltage-proof Insulation Cap provides electrical insulation for s A 250A and C 630A bushings in encapsulated substations and transformers up to 36kV, in compliance with EN 50180 and EN 50181. Submersible Easy assembly Protection from exposed electrical parts Note Each unit contains materials for one set of three isulating caps Scope of delivery 3 x Voltage-proof Insulating caps Assembly accessories Assembly instructions Cable accessories for screened cables ) 6/10 (12)kV - 12.7/22 (24)kV CIK 250A 24kV 265023 ) 6/10 (12)kV - 19/33 (36)kV CIK 630A 36kV 265024 53

Termination for single-core cables Medium Voltage 2013 ZS-CTS Accessory Kit for CTS 630A Cellplux separable cable Connectors The ZS-CTS Accessory Kit is designed for the reinstallation of separable cable connectors in substations and transformers with bushings for C outer cone systems complying with EN 50180, EN 50181. The inclusion of the tried and tested contact pin with shear bolt in this kit eliminates the possibility of faulty assembly of cable systems. Cable accessories for screened cables Reinstallation of CTS separable Cable Connector Note Each unit contains materials for one set of three shear bolts Scope of delivery Set of 3 contact pins with shear bolt Assembly accessories Assembly instructions ZS-CTS 257622 54

Termination for single-core cables Mounting Ring The Mounting Ring is designed to secure CWS 250A and CGS 250A Cellplux separable Cable Connectors to a special bushing for A outer cone systems. The Mounting Ring is simply placed in the prefabricated groove in the cable connector. The two components may then be mounted on the bushing together. Easy assembly Secure connection to special A bushing Scope of delivery 1 x Mounting Ring Cable accessories for screened cables Mounting Ring 264366 55

Termination for single-core cables Medium Voltage 2013 CKS 630A Coupling connector up to 24kV for separable cable connector type CTS The CKS shear bolt coupling connector is intended for the connection of two CTS separable cable connectors up to 24 kv at up to a rated current of 630 A. The dimensions of the longer outer cone correspond to C outer cone systems in accordance with EN 50180, EN 50181. Dimensions = ength D = External diameter Cable accessories for screened cables Individually tested Easy assembly Safe and easy to handle Indoor 1 2 D Storage conditions/shelf life Unlimited shelf life Scope of delivery Set of 3 coupling elements Assembly accessories Assembly instructions D1 D2 ) 6/10 (12)kV - 12.7/22 (24)kV CKS 630A 24kV 196.5 61.5 91 70 56 46 224853 56

Termination for single-core cables CPES Test and earthing Kit The Test and Earthing Kit is designed for the establishment of galvanic connections between cable conductors and is compatible with all CTS and CTKS Cellplux T-plugs. Cable testing Cable fault location Phase compensation Earthing for work Scope of delivery 1 x Test adapter 3 x Earthing adapter 1 x Case Assembly instructions Cable accessories for screened cables ) 6/10 (12)kV - 19/33 (36)kV CPES Test and Earthing Kit 259101 57

Termination for single-core cables Medium Voltage 2013 CPS Test-Kit The Test- Kit is designed for the establishment of galvanic connections between cable conductors and is compatible with all CTS and CTKS Cellplux T-plugs. Cable testing Cable fault location Phase compensation Scope of delivery 3 x Test adapter 1 x Case Assembly instructions Cable accessories for screened cables U0/U (Um) 6/10 (12)kV - 19/33 (36)kV CPS Test-Kit 302227 58

Straight-through joints for 3-core cables CHMSV3 Three-core straight-through joint with screw connector for all 3-core polymeric cables CHMSV 3 straight-through joints are suitable for connecting three-core polymeric cable (PVC, PE, XPE, EPR). They allow the connection of cables with copper wire screen, with different cross sections, conductor materials, semi-conducting layers (graphite-coated, removable or strippable). Screw connectors included. Dimensions = ength Reliable stress control due to flexible silicone stress control elements For both copper and aluminium conductors For all cables with copper-wire screen Wide conductor and cross-section range Quick, safe and easy assembly Ready for iediate operation Suitable for a wide range of applications due to innovative integrated screw connector Indoor Outdoor Underground Water Installation ducts Ductwork Note Incl. screw connectors min. Ø over conductor insulation after removal of outer semi-conducting layer Storage conditions/shelf life Unlimited shelf life Scope of delivery Thick wall heat-shrinkable insulation tubing Thick wall heat-shrinkable outer tubing with hot melt adhesive Silicone stress-control element Copper braid tape Innovative screw connector with conductive sheath Stress control filling tape (blue) Screw connector for copper-wire screen Assembly instructions Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 25-95 1050 12.6 25-95 297348 CHMSV 3 12kV 70-150 1050 14.7 70-150 297350 95-240 1100 17.3 95-240 297260 240-400 1250 23.1 240-400 297358 ) 8.7 /15 (17.5)kV 25-95 1050 14.7 25-95 297349 CHMSV 3 17kV 70-150 1050 18 70-150 297351 95-240 1100 19.9 95-240 297310 240-400 1250 24 240-400 297360 ) 12/20 (24)kV - 12.7/22 (24)kV 16-95 1050 14.7 16-95 297433 CHMSV 3 24kV 50-150 1050 17.3 50-150 297352 95-240 1100 19.9 95-240 297104 240-400 1250 27.3 240-400 297361 ) 18/30 (36)kV - 19/33 (36)kV 50-150 1050 20.9 50-150 297353 CHMSV 3 36kV 95-240 1100 24.2 95-240 297311 240-400 1250 32 240-400 297362 Cable accessories for screened cables 59

Straight-through joints for 3-core cables Medium Voltage 2013 CHMSV3-1 Straight-through joint with screw connector for connecting from three-core with single-core polymeric cable CHMSV 3-1 straight-through joints are suitable for connecting three-core polymeric cable with three single-core polymeric cable (PVC, PE, XPE, EPR). They allow the connection of cables with copper wire screen, with different cross sections, conductor materials, semi-conducting layers (graphite-coated, removable or strippable). Screw connectors included. Dimensions = ength Cable accessories for screened cables Reliable stress control due to flexible silicone stress control elements For both copper and aluminium conductors For all cables with copper-wire screen Wide conductor and cross-section range Quick, safe and easy assembly Ready for iediate operation Suitable for a wide range of applications due to innovative integrated screw connector Indoor Outdoor Underground Water Installation ducts Ductwork Note Incl. screw connectors min. Ø over conductor insulation after removal of outer semi-conducting layer Storage conditions/shelf life Unlimited shelf life Scope of delivery Thick wall heat-shrinkable insulation tubing Thick wall heat-shrinkable outer tubing with hot melt adhesive Silicone stress-control element Copper braid tape Innovative screw connector with conductive sheath Stress control filling tape (blue) Screw connector for copper-wire screen Assembly instructions Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 25-95 900 12.6 25-95 297449 CHMSV 3-1 12kV 70-150 900 14.7 70-150 297462 95-240 900 17.3 95-240 297442 240-400 1000 23.1 240-400 297466 ) 8.7/15 (17.5)kV 25-95 900 17.4 25-95 297460 CHMSV 3-1 17kV 70-150 900 18 70-150 297463 95-240 900 19.9 95-240 297443 240-400 1000 24 240-400 297467 ) 12/20 (24)kV - 12.7/22 (24)kV 16-95 900 14.7 16-95 297461 CHMSV 3-1 24kV 50-150 900 17.3 50-150 297464 95-240 900 19.9 95-240 297441 240-400 1000 27.3 240-400 297468 ) 18/30 (36)kV - 19/33 (36)kV 50-150 900 20.9 50-150 297465 CHMSV 3-1 36kV 95-240 900 24.2 95-240 297444 240-400 1000 32 240-400 297469 60

Straight-through joints for 3-core cables CHM3 Three-core straight-through joint for all 3-core polymeric cables CHM3 straight-through joints are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR). They allow the connection of cables with different cross sections, conductive materials, semi-conducting layers (graphite-coated, removable or strippable) and screen (copper wire or tape). Suitable for compression connectors. Dimensions = ength Reliable stress control due to flexible silicone stress control elements Wide conductor and cross-section range Quick, safe and easy assembly Ready for iediate operation min. Ø over conductor insulation after removal of outer semiconducting layer Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Joints with a range of U m = 12 kv must be used for cables of U m = 7.2 kv. (Check minimum diameter over conductor insulation). max. Ø of connector max. connector length Storage conditions/shelf life Unlimited shelf life Scope of delivery Thick wall heat-shrinkable insulation tubing Thick wall heat-shrinkable outer tubing with hot melt adhesive Silicone stress-control element Copper braid tube Pressure springs Stress control filling tape (blue) Assembly instructions Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 10-25 1200 9.9 16 90 10-25 194293 35-95 1200 12.6 25 135 35-95 194294 CHM3 12kV 95-240 1200 17.3 32 145 95-240 194295 150-300 1200 19.9 40 200 150-300 194296 ) 8.7/15 (17.5)kV 35-95 1200 12.6 25 135 35-95 194297 70-240 1200 17.3 32 145 70-240 194298 CHM3 17kV 120-300 1200 19.9 34 150 120-300 194299 240-400 1200 23.1 40 200 240-400 194300 ) 12/20 (24)kV - 12.7/22 (24)kV 10-35 1200 12.6 20 100 10-35 194301 50-150 1200 17.3 25 135 50-150 194302 CHM3 24kV 70-240 1200 19.9 32 145 70-240 194303 150-300 1200 23.1 40 200 150-300 194304 ) 18/30 (36)kV - 19/33 (36)kV 35-70 1200 19.9 20 110 35-70 194305 CHM3 36kV 50-150 1200 23.1 25 135 50-150 194306 150-300 1200 27.3 38 200 150-300 194307 Appropriate compression connectors must be ordered separately. Armour continuity kit for armoured cable available to order. Cable accessories for screened cables 61

Straight-through joints for 3-core cables Medium Voltage 2013 CAM3-S Three-core straight-through joint with heat-shrink outer protection for all 3-core polymeric cables CAM3-S straight-through joints are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR). They allow the connection of cables with different cross sections, conductive materials, semi-conducting layers (graphite-coated, removable or strippable) and screening (wire or tape screen). Suitable for compression connectors. Dimensions = ength Cable accessories for screened cables Reliable stress control due to flexible silicone stress control elements Wide conductor and cross-section range Ready for iediate operation Quick, safe and easy assembly Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Joints with a range of U m = 12 kv must be used for cables of U m = 7.2 kv. (Check minimum diameter over conductor insulation). min. Ø over conductor max. connector length Storage conditions/shelf life Unlimited shelf life Scope of delivery Thick wall heat-shrinkable outer tubing with hot melt adhesive Silicone joint body with integrated semi-conducting layer (individually tested) Copper braid tube Pressure spring ubricant Protective gloves Silicone stress-control elements Assembly instructions Nominal cross section ² 12kV 17.5kV 24kV ) 6/10 (12)kV - 12.7/22 (24)kV 16-120 1200 14.7 160 16-120 201382 CAM3-S 24kV 70-240 1200 19.9 160 70-240 201374 ) 6/10 (12)kV - 6.35/11 (12)kV 50-240 1200 14.7 160 50-240 201375 CAM3-S 12kV 150-400 1200 19.9 160 150-400 201377 ) 8.7/15 (17.5)kV 35-150 1200 14.7 160 35-150 201379 CAM3-S 17kV 95-300 1200 19.9 160 95-300 201381 Appropriate compression connectors must be ordered separately. Armour continuity kit for armoured cable available to order. 62

Termination for 3-core cables CHE-3I(A) Three-core indoor termination for all 3-core polymeric cables CHE-3I(A) terminations are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). Dimensions = ength Ø S = Diameter of cable shed Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Indoor Note Cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Storage conditions/shelf life Unlimited shelf life Scope of delivery Tracking-resistant heat-shrink tubing Heat-shrink tube Silicone stress-control elements Silicone sheds Pressure spring Silicone stress control element Assembly accessories Sealing tape Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 10-25 300 9.9 10-25 146228 CHE-3I(A) 12kV 25-95 300 12.6 25-95 146216 95-240 300 17.3 95-240 146217 150-400 300 19.9 150-400 146218 ) 8.7/15 (17.5)kV 16-50 300 12.6 1 85 16-50 195365 CHE-3I(A) 17kV 70-240 300 17.3 1 85 70-240 171761 150-300 300 19.9 1 85 150-300 171762 185-400 300 23.1 1 85 185-400 171763 ) 12/20 (24)kV - 12.7/22 (24)kV 10-35 300 12.6 1 85 10-35 146300 CHE-3I(A) 24kV 25-95 300 17.3 1 85 25-95 146302 70-240 300 19.9 1 85 70-240 146301 120-300 300 23.1 1 85 120-300 146297 ) 18/30 (36)kV - 19/33 (36)kV 35-70 500 19.9 2 85 35-70 146158 CHE-3I(A) 36kV 50-150 500 23.1 2 85 50-150 146159 150-400 500 27.3 2 115 150-400 146160 Appropriate cable lugs must be ordered separately. EGA earthing kit for cables with tape screen and armouring must be ordered separately. Cable accessories for screened cables 63

Termination for 3-core cables Medium Voltage 2013 CHE-3F(A) Three-core outdoor termination for all 3-core polymeric cables CHE-3F(A) terminations are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). Dimensions = ength Ø S = Diameter of cable shed Cable accessories for screened cables Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Outdoor Note Cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Appropriate cable lugs must be ordered separately. EGA earthing kit for cables with tape screen and armouring must be ordered separately. Storage conditions/shelf life Unlimited shelf life Scope of delivery Spreader cap Tracking-resistant heat-shrink tubing Silicone stress-control elements Silicone sheds Sealing tape Pressure spring Assembly accessories Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 10-25 300 9.9 1 80 10-25 146226 CHE-3F(A) 12kV 25-95 300 12.6 1 85 25-95 146220 95-240 300 17.3 1 85 95-240 146222 150-400 300 19.9 1 85 150-400 146224 ) 8.7/15 (17.5)kV 16-50 500 12.6 2 85 16-50 195366 CHE-3F(A) 17kV 70-240 500 17.3 2 85 70-240 171756 150-300 500 19.9 2 85 150-300 171757 185-400 500 23.1 2 85 185-400 146296 ) 12/20 (24)kV - 12.7/22 (24)kV 10-35 500 12.6 3 85 10-35 146303 CHE-3F(A) 24kV 25-95 500 17.3 3 85 25-95 146304 70-240 500 19.9 3 85 70-240 146306 120-300 500 23.1 3 85 120-300 146298 ) 18/30 (36)kV - 19/33 (36)kV 35-70 700 19.9 4 85 35-70 146234 CHE-3F(A) 36kV 50-150 700 23.1 4 85 50-150 146235 150-400 700 27.3 4 115 150-400 146242 64

Termination for 3-core cables CHE-3I(B) Three-core indoor termination for all 3-core polymeric cables CHE-3I(B) terminations are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). Dimensions = ength Ø S = Diameter of cable shed Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Indoor Note Cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Storage conditions/shelf life Unlimited shelf life Scope of delivery Tracking resistant spreader cap Tracking-resistant heat-shrink tubing Silicone stress-control elements Silicone sheds Pressure spring Assembly accessories Sealing tape Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 10-25 350 9.9 10-25 184796 CHE-3I(B) 12kV 25-95 350 12.6 25-95 173134 95-240 350 17.3 95-240 173132 150-400 350 19.9 150-400 180522 ) 8.7/15 (17.5)kV 25-50 400 12.6 25-50 182731 CHE-3I(B) 17kV 70-240 400 17.3 70-240 182732 150-300 400 19.9 150-300 182733 185-400 400 23.1 185-400 182734 ) 12/20 (24)kV - 12.7/22 (24)kV 10-35 500 12.6 1 85 10-35 184797 CHE-3I(B) 24kV 25-95 500 17.3 1 85 25-95 184798 70-240 500 19.9 1 85 70-240 184799 120-400 500 23.1 1 85 120-400 184800 ) 18/30 (36)kV - 19/33 (36)kV 35-70 650 19.9 2 85 35-70 184801 CHE-3I(B) 36kV 50-150 650 23.1 2 85 50-150 184802 150-400 650 27.3 2 115 150-400 184803 Appropriate cable lugs must be ordered separately. EGA earthing kit for cables with tape screen must be ordered separately. Cable accessories for screened cables 65

Termination for 3-core cables Medium Voltage 2013 CHE-3F(B) Three-core outdoor termination for all 3-core polymeric cables CHE-3F(B) terminations are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). Dimensions Cable accessories for screened cables Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Outdoor Note Cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S = ength Ø S = Diameter of cable shed Storage conditions/shelf life Unlimited shelf life Scope of delivery Tracking-resistant heat-shrink tubing Silicone stress-control elements Silicone sheds Sealing tape Pressure spring Assembly accessories Tracking resistant spreader cap Assembly instructions Tests CENEEC HD 629.1 (DIN VDE 0278, part 629-1) Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 10-25 700 9.9 1 80 10-25 184805 CHE-3F(B) 12kV 25-95 700 12.6 1 85 25-95 184806 95-240 700 17.3 1 85 95-240 184807 150-400 700 19.9 1 85 150-400 184808 ) 8.7/15 (17.5)kV 25-50 700 12.6 2 85 25-50 182735 CHE-3F(B) 17kV 70-240 700 17.3 2 85 70-240 182736 150-300 700 20.9 2 85 150-300 182737 185-400 700 23.1 2 85 185-400 182738 ) 12/20 (24)kV - 12.7/22 (24)kV 10-35 850 12.6 3 85 10-35 184472 CHE-3F(B) 24kV 25-95 850 17.3 3 85 25-95 184809 70-240 850 20.9 3 85 70-240 184811 120-400 850 23.1 3 85 120-400 184812 ) 18/30 (36)kV - 19/33 (36)kV 35-70 850 22.5 4 85 35-70 184813 CHE-3F(B) 36kV 50-150 850 23.1 4 85 50-150 184815 150-400 850 27.3 4 115 150-400 184816 Appropriate cable lugs must be ordered separately. EGA earthing kit for cables with tape screen must be ordered separately. 66

Termination for 3-core cables CAE-3I Three-core indoor termination for all 3-core polymeric cables CAE-3I terminations are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (wire or tape screen). Suitable for compression cable lugs. Dimensions = ength Ø S = Diameter of cable shed Wide cross-section range Silicone slip-on components for quick, safe and easy assembly Ready for iediate operation Indoor Note Compression cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Storage conditions/shelf life Unlimited shelf life Scope of delivery 3 one-piece slip-on silicone terminations with integrated stress control element Silicone tube Silicone cold-shrink spreader cap Assembly accessories Sealing tape Assembly instructions Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 95-240 270 17.3 1 87 95-240 199170 CAE-3I 12kV 150-400 270 19.9 1 90 150-400 199171 ) 8.7/15 (17.5)kV 50-185 270 17.3 1 87 50-185 199173 CAE-3I 17kV 95-240 270 19.9 1 90 95-240 199174 150-400 270 23.1 1 93 150-400 199175 ) 12/20 (24)kV - 12.7/22 (24)kV 35-120 270 17.3 1 87 35-120 199177 CAE-3I 24kV 70-240 270 19.9 1 90 70-240 199178 120-400 270 23.1 1 93 120-400 199179 ) 18/30 (36)kV - 19/33 (36)kV 16-95 325 19.9 4 90 16-95 199180 CAE-3I 36kV 50-240 325 23.1 4 93 50-240 199182 120-400 325 27.3 4 97 120-400 199181 Appropriate compression cable lugs must be ordered separately. EGA earthing kit for cables with tape screen must be ordered separately. Cable accessories for screened cables 67

Termination for 3-core cables Medium Voltage 2013 CAE-3F Three-core outdoor termination for all 3-core polymeric cables CAE-3F terminations are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (wire or tape screen). Suitable for compression cable lugs. Dimensions = ength Ø S = Diameter of cable shed Cable accessories for screened cables Wide cross-section range Silicone slip-on components for quick, safe and easy assembly Ready for iediate operation Outdoor Note Compression cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Storage conditions/shelf life Unlimited shelf life Scope of delivery 3 one-piece slip-on silicone terminations with integrated stress control element Silicone tube Silicone cold-shrink spreader cap Assembly accessories Sealing tape Assembly instructions Nominal cross section ² 12kV 17.5kV 24kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV CAE-3F 12kV 95-240 325 17.3 4 87 95-240 199201 150-400 325 19.9 4 90 150-400 199202 ) 8.7/15 (17.5)kV 50-185 325 17.3 4 87 50-185 199204 CAE-3F 17kV 95-240 325 19.9 4 87 95-240 199205 150-400 325 23.1 4 93 150-400 199206 ) 12/20 (24)kV - 12.7/22 (24)kV 35-120 325 17.3 4 87 35-120 199208 CAE-3F 24kV 70-240 325 19.9 4 90 70-240 199209 120-400 325 23.1 4 93 120-400 199210 ) 18/30 (36)kV - 19/33 (36)kV CAE-3F 36kV 50-240 440 23.1 5 93 50-240 199211 120-400 440 27.3 5 97 120-400 199212 Appropriate compression cable lugs must be ordered separately. EGA earthing kit for cables with tape screen must be ordered separately. 68

Termination for 3-core cables Cable accessories for screened cables 69

We help you achieve the highest standards 70

Page Belted cables Transition joints 72 Straight-through joints 76 Terminations 77 Cable accessories for paper-insulated cables Hoechstaedterkabel Page Transition joints 79 Straight-through joints 81 Terminations 82 Three-core single lead sheath cables Transition joints 84 Straight-through joints 86 Terminations 87 71

Transition joints Medium Voltage 2013 M...MSPB6 Three-core transition joint from belted cable to polymeric cable without external conductive layer M.MSPB6 transition joints are suitable for transitions between paper-insulated lead cables and three-core cables with plastic insulation (PVC, PE, XPE, EPR) and no outer semi-conducting layer. They allow the connection of cables with different cross M.MSPB6 transition joints are suitable for transitions between paper-insulated lead cables and three-core cables with plastic insulation (PVC, PE, XPE, EPR) and no outer semi-conducting layer. They allow the connection of cables with different cross sections, conductive materials and structure. They do not contain any substances which inhibit paint wetting and are suitable for use in the automotive industry. Dimensions = ength D = Diameter Cable accessories for paper-insulated cables Quick, safe and easy assembly Resistant to chemical agents ongitudinally and transversely watertight High mechanical strength 1 2 D1 Appropriate connectors must be ordered separately. Indoor Outdoor Underground Water Installation ducts Ductwork Note Connectors not included D2 D3 Cable-Ø Scope of delivery Distance sleeve Hydrolysis-resistant PUR type EG cast-resin, containing the correct volume ready for mixing Transparent plastic moulds Spreader cap Armour continuity kit Fill and air-release funnel Heat-shrinkable tubing for sealing Assembly accessories Assembly instructions 3x Nominal cross section per conductor Polymeric cable ² ) 3.6/6 (7.2)kV - 3.8/6.6 (7.2)kV M4MSPB6 432 384 28.9 52 90 29-55 25-70 124334 M5MSPB6 550 503 41.6 62 110 42-65 70-120 124335 72

Transition joints CHMPRSV 3-1 Transition joint with screw connectors, from belted cable to polymeric cables CHMPRSV3-1 hybrid transition joints for transition to three single-core plasticinsulated cables are suitable for both paper-insulated lead cables and Hochsta dter cables up to 17.5 kv. With screw connectors. Dimensions = ength Reliable stress control due to flexible silicone stress control elements Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Suitable for a wide range of applications due to innovative integrated screw connector Indoor Outdoor Underground Water Installation ducts Ductwork Note Incl. Screw connectors min. Ø over conductor insulation after removal of outer semi-conducting layer Storage conditions/shelf life Unlimited shelf life Scope of delivery Spreader cap Thick wall heat-shrinkable outer tubing with hot melt adhesive Oil barrier tubing Heat-shrink tubing Silicone stress-control elements Earthing wire Copper braid tape Pressure spring Assembly accessories Sealing tape Stress control filling tape (blue) Fire protection wrap Screw connector for copper-wire screen Innovative screw connector with conductive sheath Assembly instructions Nominal cross section ² 12kV 17.5kV ) 6/10 (12)kV - 8.7 /15 (17.5)kV 35-95 1200 12.6 50-95 35-95 264988 70-150 1200 17.3 95-150 70-150 265205 CHMPRSV3-1 17kV 95-240 1200 17.3 95-240 95-240 264769 240-400 1200 23.1 240-400 240-400 265501 Cable accessories for paper-insulated cables 73

Transition joints Medium Voltage 2013 CHMPR 3-1 Transition joint from belted cable to polymeric cables CHMPR3-1 hybrid transition joints for transition to three single-core plasticinsulated cables are suitable for both paper-insulated lead cables and Hochsta dter cables up to 17.5 kv. Padding kits for paper-insulated cables are available for downwards enlargement of the operational area. Suitable for Compression connectors. Dimensions = ength Cable accessories for paper-insulated cables Reliable stress control due to flexible silicone stress control elements Wide conductor and cross-section range Wide cross-section range Quick, safe and easy assembly Ready for iediate operation min. Ø over conductor insulation after removal of outer semiconducting layer ) 6/10 (12)kV - 8.7 /15 (17.5)kV CHMPR3-1 17kV Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Nominal cross section ² 12 kv 17.5 kv max. Ø of connector max. connector length Storage conditions/shelf life Unlimited shelf life Scope of delivery Spreader cap Thick wall heat-shrinkable outer tubing with hot melt adhesive Oil barrier tubing Heat-shrink tubing Silicone stress-control elements Earthing wire Copper braid tape Pressure spring Assembly accessories Sealing tape Stress control filling tape (blue) Fire protection wrap Assembly instructions Nominal cross section ² max. Ø of connector max. connector length 35-50 1100 12.6 50-95 25 145 35-50 20 110 197603 70-240 1100 17.3 95-300 34 145 70-240 34 145 197604 240-400 1100 23.1 300-400 42 170 240-400 42 170 197606 Appropriate connectors must be ordered separately. Padding kits must be ordered separately. Padding kit PS(G+H)17/1 (197690) to be used with 197604 sur 35-50² (17.5kV) and 35-70² (12kV). 74

Transition joints CHMPR 3 Transition joint from belted cable to polymeric cables CHMPR3 hybrid transition joints for transition to three-core plastic-insulated cables are suitable for both paper-insulated lead cables and Hochsta dter cables up to 17.5 kv. Padding kits for paper-insulated cables are available for downwards enlargement of the operational area. Suitable for Compression connectors. Dimensions = ength Reliable stress control due to flexible silicone stress control elements Quick, safe and easy assembly Ready for iediate operation Wide cross-section range min. Ø over conductor insulation after removal of outer semiconducting layer ) 6/10 (12)kV - 8.7 /15 (17.5)kV CHMPR3 17kV Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Nominal cross section ² 12 kv 17 kv max. Ø of connector max. connector length Storage conditions/shelf life Unlimited shelf life Scope of delivery Spreader cap Thick wall heat-shrinkable outer tubing with hot melt adhesive Oil barrier tubing Heat-shrink tubing Silicone stress-control elements Earthing wire Copper braid tape Pressure spring Assembly accessories Sealing tape Stress control filling tape (blue) Fire protection wrap Assembly instructions Nominal cross section ² max. Ø of connector max. connector length 35-50 1400 12.6 50-95 25 145 35-50 20 110 197618 70-240 1400 17.3 95-300 34 145 70-240 34 145 197619 240-400 1400 23.1 300-400 42 170 240-400 42 170 197620 Appropriate compression connectors must be ordered separately. Padding kits must be ordered separately. Padding kit PS(G+H)17/1 (197690) tob e used with 197619 sur 35-50² (17.5kV and resp. 35-70² (12kV). Cable accessories for paper-insulated cables 75

Straight-through joints Medium Voltage 2013 CHMPPR3 Straight-through joint for belted cables up to 17.5 kv (MIND) CHMPPR3 hybrid transition joints are suitable for belted cables and Hochsta dter cables up to 17.5 kv. Suitable for compression connectors. Dimensions = ength Cable accessories for paper-insulated cables Quick, safe and easy assembly Ready for iediate operation Wide cross-section range min. Ø over conductor insulation after removal of outer semiconducting layer ) 6/10 (12)kV - 8.7 /15 (17.5)kV CHMPPR3 17kV Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Nominal cross section ² 12 kv 17.5kV max. Ø of connector max. connector length Storage conditions/shelf life Unlimited shelf life Scope of delivery Spreader cap Thick wall heat-shrinkable outer tubing with hot melt adhesive Oil barrier tubing Heat-shrink tubing Earthing wire Copper braid tape Pressure spring Assembly accessories Sealing tape Stress control filling tape (blue) Fire protection wrap Assembly instructions Nominal cross section ² max. Ø of connector max. connector length 35-50 1400 15.2 50-95 25 145 35-50 20 110 197658 70-240 1400 17.9 95-300 34 145 70-240 34 145 197659 240-400 1400 26.3 300-400 42 170 240-400 42 170 197660 Appropriate compression connectors must be ordered separately. 76

Terminations CHEP-3I Indoor termination for belted cables up to 17.5 kv (MIND) CHEP-3I indoor terminations are suitable for belted cables up to 17.5 kv for MIND cables only. For cables with draining compound please contact us. Dimensions = ength Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Indoor Note Cable lugs not included Storage conditions/shelf life Unlimited shelf life Scope of delivery Tracking resistant spreader cap Tracking-resistant heat-shrink tubing Earthing kit Assembly accessories Sealing tape Assembly instructions Appropriate cable lugs must be ordered separately. min. Ø over conductor Nominal cross section ² 12 kv 17.5kV ) 6/10 (12)kV - 8.7 /15 (17.5)kV 16-50 500 9.9 16-50 197515 CHEP-3I 12kV 25-240 500 13.2 70-240 25-240 197516 95-300 500 16.5 120-400 95-300 197517 Cable accessories for paper-insulated cables 77

Terminations Medium Voltage 2013 CHEP-3F Outdoor termination for belted cables up to 17.5 kv (MIND) CHEP-3F outdoor terminations are suitable for belted cables up to 17.5 kv for MIND cables only. For cables with draining compound please contact us. Dimensions = ength Ø S = Diameter of cable shed Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Outdoor Note Cable lugs not included Storage conditions/shelf life Unlimited shelf life Scope of delivery Tracking resistant spreader cap Tracking-resistant heat-shrink tubing Silicone sheds Earthing kit Assembly accessories Sealing tape Assembly instructions Cable accessories for paper-insulated cables min. Ø over conductor Number of sheds per phase Ø S Nominal cross section ² 12 kv 17.5kV ) 6/10 (12)kV - 8.7 /15 (17.5)kV 16-50 500 9.9 2 80 16-50 197537 CHEP-3F 17kV 25-240 500 13.2 2 85 70-240 25-240 197538 95-300 500 16.5 2 85 95-300 197539 Appropriate cable lugs must be ordered separately. 78

Transition joints CHMP(H) 3-1 Transition joint for H-cables to polymeric cables CHMP(H)3-1 hybrid transition joints for transition to three single-core plasticinsulated cables are suitable for Hochsta dter cables up 24 to 36 kv. Padding kits for paper-insulated cables are available for downwards enlargement of the operational area. Suitable for compression connectors. Dimensions = ength Reliable stress control due to flexible silicone stress control elements Wide conductor and cross-section range Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included min. Ø over conductor insulation after removal of outer semi-conducting layer max. Ø of connector max. connector length Storage conditions/shelf life Unlimited shelf life Scope of delivery Spreader cap Thick wall heat-shrinkable outer tubing with hot melt adhesive Oil barrier tubing Heat-shrink tubing Silicone stress-control elements Earthing wire Copper braid tape Pressure spring Assembly accessories Sealing tape Stress control filling tape (blue) Fire protection wrap Assembly instructions Nominal cross section ² 24kV 36kV ) 12/20 (24)kV - 12.7/22 (24)kV 16-35 1200 12.6 15 100 16-35 197607 CHMP(H)3-1 24 kv 35-70 1200 17.3 20 110 35-70 197608 95-240 1200 19.9 34 145 95-240 197609 185-300 1200 23.1 42 145 185-300 197610 ) 18/30 (36)kV - 19/33 (36)kV 35-50 1200 19.9 20 110 35-50 197614 CHMP(H)3-1 36 kv 70-150 1200 23.1 28 145 70-150 197616 150-300 1200 27.3 36 145 150-300 197617 Appropriate compression connectors must be ordered separately. Padding kits must be ordered separately. Padding kit PS(H)24/1 (197692) to be used with 197609 sur 35-70² (24kV) and 35-70² (24kV). Cable accessories for paper-insulated cables 79

Transition joints Medium Voltage 2013 CHMP(H) 3 Transition joint for H-cables to polymeric cables CHMP(H)3 hybrid transition joints for transition to three-core plastic-insulated cables are suitable for Hochsta dter cables up 24 to 36 kv. Padding kits for paper-insulated cables are available for downwards enlargement of the operational area. Suitable for compression connectors. Dimensions = ength Cable accessories for paper-insulated cables Reliable stress control due to flexible silicone stress control elements Quick, safe and easy assembly Ready for iediate operation Wide cross-section range Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included min. Ø over conductor insulation after removal of outer semi-conducting layer max. Ø of connector max. connector length Storage conditions/shelf life Unlimited shelf life Scope of delivery Spreader cap Thick wall heat-shrinkable outer tubing with hot melt adhesive Oil barrier tubing Heat-shrink tubing Silicone stress-control elements Earthing wire Copper braid tape Pressure spring Assembly accessories Sealing tape Stress control filling tape (blue) Fire protection wrap Assembly instructions Nominal cross section ² 24kV 36kV ) 12/20 (24)kV - 12.7/22 (24)kV 16-35 1400 12.6 15 100 16-35 197621 CHMP(H)3 24kV 35-70 1400 17.3 20 110 35-70 197622 95-240 1400 19.9 34 145 95-240 197623 185-300 1400 23.1 42 145 185-300 197624 ) 18/30 (36)kV - 19/33 (36)kV 35-50 1400 19.9 20 110 35-50 197625 CHMP(H)3 36kV 70-150 1400 23.1 28 145 70-150 197626 150-300 1400 27.3 36 145 150-300 197627 Appropriate compression connectors must be ordered separately. Padding kits must be ordered separately. Padding kit PS(H)24/1 (197692) to be used with 197623 sur 35-70² (24kV) and 35-70² (24kV). 80

Straight-through joints CHMPP(H)3 Straight-through joint for H-cables from 24 up to 36 kv CHMPP(H)3 hybrid transition joints are suitable for Hochsta dter cables up to 24 to 36 kv. Padding kits for paper-insulated cables are available for downwards enlargement of the operational area. Suitable for compression connectors. Dimensions = ength Quick, safe and easy assembly Ready for iediate operation Wide cross-section range Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included min. Ø over conductor insulation after removal of outer semi-conducting layer Appropriate compression connectors must be ordered separately. max. Ø of connector max. connector length Storage conditions/shelf life Unlimited shelf life Scope of delivery Spreader cap Thick wall heat-shrinkable outer tubing with hot melt adhesive Oil barrier tubing Heat-shrink tubing Silicone stress-control elements Earthing wire Copper braid tape Pressure spring Assembly accessories Sealing tape Spacers Stress control filling tape (blue) Fire protection wrap Assembly instructions Nominal cross section ² 24kV 36kV ) 12/20 (24)kV - 12.7/22 (24)kV 16-35 1400 16.5 15 100 16-35 197661 CHMPP(H)3 24kV 35-70 1400 17.4 20 110 35-70 197662 95-240 1400 21.6 34 145 95-240 197663 185-300 1400 25.8 42 145 185-300 197664 ) 18/30 (36)kV - 19/33 (36)kV 35-50 1400 21.4 20 110 35-50 197665 CHMPP(H)3 36kV 70-150 1400 24 28 145 70-150 197666 150-300 1400 28.2 36 145 150-300 197667 Cable accessories for paper-insulated cables 81

Terminations Medium Voltage 2013 CHEP(H)-3I Indoor termination for H-cables from 24 up to 36 kv CHEP(H)-3F outdoor terminations are suitable for Hoechstaedter cables from 24 up to 36 kv for MIND cables only. For cables with draining compound please contact us. Dimensions = ength Ø S = Diameter of cable shed Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Indoor Note Cable lugs not included Storage conditions/shelf life Unlimited shelf life Scope of delivery Tracking-resistant heat-shrink tubing Conductive spreader cap Conductive heat-shrink tubing Oil barrier tubing Filling tape Silicone sheds Earthing wire Pressure spring Assembly instructions Cable accessories for paper-insulated cables min. Ø over conductor Number of sheds per phase Ø S Nominal cross section ² 24kV 36kV U0 ) 12/20 (24)kV - 12.7/22 (24)kV 16-35 500 12.6 1 80 16-35 197531 50-150 500 17.3 1 85 50-150 197532 CHEP(H)-3I 24kV 70-240 500 19.9 1 85 70-240 197533 120-300 500 23.1 1 85 120-300 197534 ) 18/30 (36)kV - 19/33 (36)kV 35-70 650 19.9 2 85 35-70 197535 CHEP(H)-3I 36kV 50-240 650 23.1 2 85 50-240 197536 Appropriate cable lugs must be ordered separately. 82

Terminations CHEP(H)-3F Outdoor termination for H-cables from 24 up to 36 kv CHEP(H)-3F outdoor terminations are suitable for Hoechstaedter cables from 24 up to 36 kv for MIND cables only. For cables with draining compound please contact us. Dimensions = ength Ø S = Diameter of cable shed Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Outdoor Note Cable lugs not included min. Ø over conductor Number of sheds per phase Ø S Storage conditions/shelf life Unlimited shelf life Scope of delivery Thick wall heat-shrinkable outer tubing with hot melt adhesive Tracking-resistant heat-shrink tubing Conductive spreader cap Oil barrier tubing Filling tape Silicone sheds Earthing wire Pressure spring Sealing tape Oil-barrier stress control filling tape (blue) Assembly instructions Nominal cross section ² 24kV 36kV ) 12/20 (24)kV - 12.7/22 (24)kV 16-35 850 12.6 3 80 16-35 197543 50-150 850 17.3 3 85 50-150 197544 CHEP(H)-3F 24kV 70-240 850 19.9 3 85 70-240 197545 120-300 850 23.1 3 85 120-300 197546 ) 18/30 (36)kV - 19/33 (36)kV 35-70 850 19.9 4 85 35-70 197547 CHEP(H)-3F 36kV 50-240 850 23.1 4 85 50-240 197548 Appropriate cable lugs must be ordered separately. Cable accessories for paper-insulated cables 83

Transition joints Medium Voltage 2013 CHMP(3Pb) 3-1 Transition joint for 3-core single lead sheath cables to polymeric cables CHMP(3Pb)3-1 hybrid transition joints for transition to three single-core cables are suitable for all three-core lead sheath cables up to 36 kv. Padding kits for paper-insulated cables are available for downwards enlargement of the operational area. Suitable for compression connectors. Dimensions = ength Cable accessories for paper-insulated cables Reliable stress control due to flexible silicone stress control elements Wide conductor and cross-section range Wide cross-section range Quick, safe and easy assembly Ready for iediate operation min. Ø over conductor insulation after removal of outer semi-conducting layer ) 6/10 (12)kV - 8.7 /15 (17.5)kV CHMP(3Pb)3-1 17 kv Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Nominal cross section ² 12 kv 17 kv max. Ø of connector max. connector length Scope of delivery Spreader cap Thick wall heat-shrinkable outer tubing with hot melt adhesive Oil barrier tubing Heat-shrink tubing Silicone stress-control elements Earthing wire Copper braid tape Pressure spring Assembly accessories Sealing tape Stress control filling tape (blue) Fire protection wrap Assembly instructions Nominal cross section ² max. Ø of connector max. connector length 25-50 1200 12.6 50-95 25 110 25-50 20 110 197628 70-150 1200 17.3 95-185 32 140 70-150 25 140 198782 120-240 1200 19.9 150-300 36 150 120-240 34 150 197629 240-300 1200 23.1 300-400 40 170 240-300 40 150 197630 min. Ø over conductor insulation after removal of outer semi-conducting layer ) 12/20 (24)kV - 12.7/22 (24)kV CHMP3Pb3-1 24kV max. Ø of connector max. connector length Nominal cross section ² Appropriate compression connectors must be ordered separately. Padding kits must be ordered separately. Padding kit PS(3Pb+Pb), (197699) to be used with 197633 sur 35-70² (24kV). Please use the padding kit PS(3Pb+Pb), (197701) for the following case: for 197636 sur 35-70² (36kV). Please use the padding kit PS(3Pb+Pb), (Art.Nr.197702) for the following case: for 197637 sur 70-150² (36kV). 24kV 36kV 16-25 1200 12.6 20 100 16-25 197631 35-95 1200 17.3 25 110 35-95 197632 95-240 1200 19.9 34 150 95-240 197633 185-300 1200 23.1 40 150 185-300 197634 ) 18/30 (36)kV - 19/33 (36)kV CHMP3Pb3-1 36kV 35-50 1200 19.9 20 110 35-50 197635 70-150 1200 23.1 25 150 70-150 197636 150-300 1200 27.3 38 160 150-300 197637 84

Transition joints CHMP(3Pb) 3 Transition joint for 3-core single lead sheath cables to polymeric cables CHMPP(3Pb)3 hybrid transition joints are suitable for all three-core lead sheath cables up to 36 kv. Padding kits for paper-insulated cables are available for downwards enlargement of the operational area. Suitable for compression connectors. Dimensions = ength Reliable stress control due to flexible silicone stress control elements Wide cross-section range Quick, safe and easy assembly Ready for iediate operation min. Ø over conductor insulation after removal of outer semi-conducting layer ) 6/10 (12)kV - 8.7 /15 (17.5)kV CHMP(3Pb)3 17kV Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Storage conditions/shelf life Unlimited shelf life Nominal cross section ² 12 kv 17.5 kv max. Ø of connector max. connector length Scope of delivery Spreader cap Thick wall heat-shrinkable outer tubing with hot melt adhesive Oil barrier tubing Heat-shrink tubing Silicone stress-control elements Earthing wire Copper braid tape Pressure spring Assembly accessories Sealing tape Stress control filling tape (blue) Fire protection wrap Assembly instructions Nominal cross section ² max. Ø of connector max. connector length 25-50 1400 12.6 50-95 25 110 25-50 20 110 197638 70-150 1400 17.3 95-185 32 140 70-150 25 140 198783 120-240 1400 19.9 150-300 36 150 120-240 34 150 197639 240-300 1400 23.1 300-400 40 170 240-300 40 150 197640 min. Ø over conductor insulation after removal of outer semi-conducting layer ) 12/20 (24)kV - 12.7/22 (24)kV CHMP(3Pb)3 24kV max. Ø of connector max. connector length Nominal cross section ² Appropriate compression connectors must be ordered separately. Padding kits must be ordered separately. Padding kit PS(3Pb+Pb), (197699) to be used with 197633 sur 35-70² (24kV). Please use the padding kit PS(3Pb+Pb), (197701) for the following case: for 197636 sur 35-70² (36kV). Please use the padding kit PS(3Pb+Pb), (Art.Nr.197702) for the following case: for 197637 sur 70-150² (36kV). 24kV 36kV 16-25 1400 12.6 20 100 16-25 197641 35-95 1400 17.3 25 110 35-95 197642 95-240 1400 19.9 34 150 95-240 197643 185-300 1400 23.1 40 150 185-300 197644 ) 18/30 (36)kV - 19/33 (36)kV CHMP(3Pb)3 36kV 35-50 1400 19.9 20 110 35-50 197645 70-150 1400 23.1 25 150 70-150 197646 150-300 1400 27.3 38 160 150-300 197647 Cable accessories for paper-insulated cables 85

Straight-through joints Medium Voltage 2013 CHMPP(3Pb)3 Straight-through joint for 3-core single lead sheath cables CHMPP(3Pb)3 hybrid transition joints are suitable for all three-core lead sheath cables up to 36 kv. Suitable for compression connectors. Dimensions = ength Cable accessories for paper-insulated cables Quick, safe and easy assembly Ready for iediate operation Wide cross-section range min. Ø over conductor ) 6/10 (12)kV - 8.7 /15 (17.5)kV CHMPP(3Pb)3 12kV Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Nominal cross section ² 12 kv 17.5 kv max. Ø of connector max. connector length Storage conditions/shelf life Unlimited shelf life Scope of delivery Spreader cap Thick wall heat-shrinkable outer tubing with hot melt adhesive Oil barrier tubing Heat-shrink tubing Silicone stress-control elements Earthing wire Copper braid tape Pressure spring Assembly accessories Sealing tape Stress control filling tape (blue) Fire protection wrap Assembly instructions Nominal cross section ² max. Ø of connector max. connector length 25-50 1400 14.1 50-95 25 110 25-50 20 110 197668 70-150 1400 17.6 95-185 32 140 70-150 25 140 198784 120-240 1400 20.5 150-300 36 150 120-240 34 150 197669 240-300 1400 25.6 300-400 40 170 240-300 40 150 197670 min. Ø over conductor ) 12/20 (24)kV - 12.7/22 (24)kV CHMPP(3Pb)3 24kV max. Ø of connector Appropriate compression connector must be ordered separately. max. connector length Nominal cross section ² 24kV 36kV 16-25 1400 15.4 20 100 16-25 197671 35-95 1400 17.4 25 110 35-95 197672 95-240 1400 21.6 34 150 95-240 197673 185-300 1400 25.8 40 150 185-300 197674 ) 18/30 (36)kV - 19/33 (36)kV CHMPP(3Pb)3 36kV 35-50 1400 21.4 20 110 35-50 197675 70-150 1400 24 25 150 70-150 197676 150-300 1400 28.2 36 160 150-300 197677 86

Terminations CHEP(3Pb)-3I Indoor termination for 3-core single lead sheath cables CHEP(3Pb)-3I indoor terminations are suitable for three-core single lead sheath cables from 24 up to 36 kv for MIND cables only. For cables with draining compound please contact us. Dimensions = ength Ø S = Diameter of cable shed Combination of slip-on and heat-shrink components Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Indoor Note Cable lugs not included Storage conditions/shelf life Unlimited shelf life Scope of delivery Tracking-resistant heat-shrink tubing Oil barrier tubing Silicone sheds Sealing tape Oil-barrier stress control filling tape (blue) Earthing wire Pressure spring Assembly instructions min. Ø over conductor Number of sheds per phase Ø S Nominal cross section ² 24kV 36kV ) 12/20 (24)kV - 12.7/22 (24)kV 16-35 450 12.2 1 80 16-35 197555 50-150 450 17.2 1 85 50-150 197556 CHEP(3Pb)-3I 24kV 70-240 450 19.9 1 85 70-240 197557 120-300 450 23.1 1 85 120-300 197558 ) 18/30 (36)kV - 19/33 (36)kV 35-70 600 19.9 2 85 35-70 197559 CHEP(3Pb)-3I 36kV 95-240 600 23.1 2 85 95-240 197560 Appropriate cable lugs must be ordered separately. Cable accessories for paper-insulated cables 87

Terminations Medium Voltage 2013 CHEP(3Pb)-3F Outdoor termination for 3-core single lead sheath cables CHEP(3Pb)-3F outdoor terminations are suitable for three-core single lead sheath cables from 24 up to 36 kv for MIND cables only. For cables with draining compound please contact us. Dimensions = ength Ø S = Diameter of cable shed Combination of slip-on and heat-shrink components Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Outdoor Note Cable lugs not included Storage conditions/shelf life Unlimited shelf life Scope of delivery Weatherproof spreader cap Tracking-resistant heat-shrink tubing Oil barrier tubing Silicone sheds Sealing tape Oil-barrier stress control filling tape (blue) Earthing wire Pressure spring Assembly instructions Cable accessories for paper-insulated cables min. Ø over conductor Number of sheds per phase Ø S Nominal cross section ² 24kV 36kV ) 12/20 (24)kV - 12.7/22 (24)kV 16-35 600 12.2 3 80 16-35 197567 50-150 600 17.2 3 85 50-150 197568 CHEP(3Pb)-3F 24kV 70-240 600 19.9 3 85 70-240 197569 120-300 600 23.1 3 85 120-300 197570 ) 18/30 (36)kV - 19/33 (36)kV 35-70 750 19.9 4 85 35-70 197571 CHEP(3Pb)-3F 36kV 95-240 750 23.1 4 85 95-240 197572 Appropriate cable lugs must be ordered separately. 88

Terminations Cable accessories for paper-insulated cables 89

Complete safety 90

Medium Voltage 2013 Page Straight-through joints for single-core cables 92 Straight-through joints for 3-core cables 93 Terminations for single-core cables 94 Terminations for 3-core cables 96 Accessories 98 Cable accessories for screened cables according to British Standard 91

Straight-through joints for single-core cables Medium Voltage 2013 CHM(BS) Single-core straight-through joint for all polymeric single-core cables CHM (BS) straight-through joints are suitable for all single-core plasticinsulated cables (PVC, PE, XPE, EPR). They allow the connection of cables with different cross sections, conductive materials, semi-conducting layers (graphite-coated, removable or strippable) and screening (copper wire or tape). Suitable for compression connectors. Dimensions = ength Cable accessories for screened cables according to British Standard Reliable stress control due to flexible silicone stress control elements Quick, safe and easy assembly Ready for iediate operation Wide cross-section range Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Joints with a range of U m = 12 kv must be used for cables of U m = 7.2 kv. (Check minimum diameter over conductor insulation). Storage conditions/shelf life Unlimited shelf life Scope of delivery Thick wall heat-shrinkable insulation tubing Thick wall heat-shrinkable outer tubing with hot melt adhesive Silicone stress-control elements Copper braid tube Pressure springs Assembly accessories Steel cage Stress control filling tape (blue) Assembly instructions min. Ø over conductor insulation after removal of outer semi-conducting layer max. Ø of connector max. connector length Nominal cross section ² ) 6/10 (12)kV - 6.35/11 (12)kV CHM(BS) 12kV 400-630 1100 27.3 60 360 400-630 253845 ) 18/30 (36)kV - 19/33 (36)kV 150-400 900 27.3 38 200 150-400 253844 CHM(BS) 36kV 500-800 1100 36.8 60 360 500-800 253843 Appropriate compression connectors must be ordered separately. 12kV 36kV 92

Straight-through joints for 3-core cables CHM3(BS) Three-core straight-through joint for all 3-core polymeric cables CHM3(BS) straight-through joints are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR). They allow the connection of cables with different cross sections, conductive materials, semi-conducting layers (graphite-coated, removable or strippable) and screening (copper wire or tape). Suitable for compression connectors. Dimensions = ength Reliable stress control due to flexible silicone stress control elements For all cables with copper wire or tape screen Quick, safe and easy assembly Ready for iediate operation Wide cross-section range Indoor Outdoor Underground Water Installation ducts Ductwork Note Compression connectors not included Joints with a range of U m = 12 kv must be used for cables of U m = 7.2 kv. (Check minimum diameter over conductor insulation). Storage conditions/shelf life Unlimited shelf life Scope of delivery Thick wall heat-shrinkable insulation tubing Thick wall heat-shrinkable outer tubing with hot melt adhesive Silicone stress-control element Copper braid tube Pressure springs Stress control filling tape (blue) Assembly instructions Steel cage Assembly accessories Cable accessories for screened cables according to British Standard min. Ø over conductor insulation after removal of outer semiconducting layer U0/U (Um) 6/10 (12)kV - 6.35/11 (12)kV CHM3(BS) 12kV max. Ø of connector max. connector length Nominal cross section ² 12kV 17.5kV 24kV 36kV 35-95 1500 12.6 19 90 35-95 248770 95-240 1500 17.3 29 125 95-240 248718 150-300 1500 19.9 32 125 150-300 248717 U0/U (Um) 8.7/15 (17.5)kV CHM3(BS) 17kV 35-95 1500 12.6 19 90 35-95 249471 70-240 1500 17.3 29 125 70-240 249474 120-300 1500 19.9 32 125 120-300 249476 U0/U (Um) 12/20 (24)kV - 12.7/22 (24)kV CHM3(BS) 24kV 35-95 1500 17.3 19 90 35-95 253917 70-240 1500 19.9 29 125 70-240 253911 150-300 1500 23.1 32 125 150-300 253929 U0/U (Um) 18/30 (36)kV - 19/33 (36)kV CHM3(BS) 50-150 1500 23.1 23 105 50-150 248716 36kV 150-300 1500 27.3 32 125 150-300 248719 Appropriate compression connectors must be ordered separately. 93

Terminations for single-core cables Medium Voltage 2013 CHE-I (BS) Single-core indoor termination for all polymeric single-core cables CHE-I(BS) terminations are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). Dimensions Cable accessories for screened cables according to British Standard Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Compatible with all cable lugs Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Indoor Note Cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). = ength Ø S = Diameter of cable shed Storage conditions/shelf life Unlimited shelf life Scope of delivery 1 Set for 3 phases Tracking-resistant heat-shrink tubing Silicone stress-control elements Silicone sheds Earthing kit Sealing tape Assembly instructions min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Nominal cross section ² 12kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV CHE-I(BS) 12kV 400-630 400 27.3 400-630 253847 ) 18/30 (36)kV - 19/33 (36)kV CHE-I(BS) 36kV 150-400 600 27.3 2 115 150-400 253849 Appropriate cable lugs must be ordered separately. 94

Terminations for single-core cables CHE-F(BS) Single-core outdoor termination for all polymeric single-core cables CHE-F(BS) terminations are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). Dimensions Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Outdoor Note Cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). = ength Ø S = Diameter of cable shed Storage conditions/shelf life Unlimited shelf life Scope of delivery 1 Set for 3 phases Tracking-resistant heat-shrink tubing Silicone stress-control elements Silicone sheds Earthing kit Sealing tape Assembly instructions Cable accessories for screened cables according to British Standard min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Nominal cross section ² 12kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV CHE-F(BS) 12kV 400-630 400 27.3 1 115 400-630 253848 ) 18/30 (36)kV - 19/33 (36)kV CHE-F(BS) 36kV 150-400 800 27.3 4 115 150-400 253850 Appropriate cable lugs must be ordered separately. 95

Terminations for 3-core cables Medium Voltage 2013 CHE-3I(BS) Three-core indoor termination for all 3-core polymeric cables CHE-3I(BS) terminations are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). Dimensions Cable accessories for screened cables according to British Standard Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Indoor Note Cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). Each unit contains materials for one set of three terminations. = ength Ø S = Diameter of cable shed Storage conditions/shelf life Unlimited shelf life Scope of delivery Tracking-resistant heat-shrink tubing Silicone stress-control elements Silicone sheds Earthing kit Sealing tape Tracking resistant spreader cap Assembly instructions min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Nominal cross section ² 12kV 17.5kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 25-95 350 12.6 25-95 249328 CHE-3I(BS) 12kV 95-240 350 17.3 95-240 249331 150-400 350 19.9 150-400 249332 ) 8.7/15 (17.5)kV CHE-3I(BS) 17kV 25-50 400 12.6 25-50 249468 150-300 400 19.9 150-300 249469 ) 18/30 (36)kV - 19/33 (36)kV CHE-3I(BS) 36kV 50-150 650 23.1 2 85 50-150 249333 150-400 650 27.3 2 115 150-400 249334 Appropriate cable lugs must be ordered separately. 96

Terminations for 3-core cables CHE-3F(BS) Three-core outdoor termination for all 3-core polymeric cables CHE-3F(BS) terminations are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). Dimensions Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Wide cross-section range Quick, safe and easy assembly Ready for iediate operation Outdoor Note Cable lugs not included 12 kv terminations must be used for 7.2 kv cables (Check minimum diameter over conductor insulation). = ength Ø S = Diameter of cable shed Storage conditions/shelf life Unlimited shelf life Scope of delivery Tracking-resistant heat-shrink tubing Silicone stress-control elements Silicone sheds Earthing kit Sealing tape Tracking resistant spreader cap Assembly instructions Cable accessories for screened cables according to British Standard min. Ø over conductor insulation after removal of outer semi-conducting layer Number of sheds per phase Ø S Nominal cross section ² 12kV 17.5kV 36kV ) 6/10 (12)kV - 6.35/11 (12)kV 25-95 1200 12.6 1 85 25-95 249191 CHE-3F(BS) 12kV 95-240 1200 17.3 1 85 95-240 249192 150-400 1200 19.9 1 85 150-400 249193 ) 8.7/15 (17.5)kV CHE-3F(BS) 17kV 25-50 1200 12.6 2 85 25-50 249464 150-300 1200 19.9 2 85 150-300 249466 ) 18/30 (36)kV - 19/33 (36)kV CHE-3F(BS) 36kV 50-150 1200 23.1 3 85 50-150 249194 150-400 1200 27.3 3 115 150-400 249195 Appropriate cable lugs must be ordered separately. 97

Accessories Medium Voltage 2013 AUF(BS) Armour continuity for three-core joints Armour continuity for armoured three-core polymeric cables in accordance with British Standard. Dimensions = ength Cable accessories for screened cables according to British Standard Quick, safe and easy assembly Superior electrical properties High mechanical strength Earthing continuity and earth contactor For cast resin, heat-shrink and slip-on cable accessories Enables solder-free electrical connection of metal cable components (screen, armouring, metal sheath). Storage conditions/shelf life Unlimited shelf life Scope of delivery Hose clamp Steel cage Cloth tape Backup-ring Internal-Ø Nominal cross section ² 7.2 kv 12 kv 17.5 kv 24 kv 36 kv AUF 1100/53 1100 53 150 95 70 50 195369 1100/73 1100 73 150-300 120-300 95-240 70-150 95 195380 1100/87 1100 87 150-300 150-300 120-185 195381 1100/97 1100 97 150-300 195382 1100/107 1100 107 240-400 304089 98

Accessories EGA(BS) Earthing accessories for cables with tape screen and/or armouring for terminations EGA(BS) earthing kit for three-core polymeric cables in accordance with British Standard. Quick, safe and easy assembly Superior electrical properties High mechanical strength Suitable for indoor and outdoor use Earth connection and contactor For cast resin, heat-shrink and slip-on cable accessories Enables solder-free electrical connection of metal cable components (screen, armouring, metal sheath). Note Incl. cable lug Storage conditions/shelf life Unlimited shelf life Scope of delivery Heat-shrink tube Earthing wire Earthing accessories Pressure springs Hose clamp Backup-ring Cable accessories for screened cables according to British Standard EGA3BS Internal-Ø Nominal cross section Copper braid ² Nominal cross section ² 7.2 kv 12 kv 17.5 kv 24 kv 36 kv (53) 53 25 150 95 70 50 185050 (68) 68 25 150-240 120-240 95-185 70-150 50 185051 (73) 73 25 240-300 185-300 150-240 120-185 70-95 185052 (87) 87 35 185-300 185-300 120-185 185053 (97) 97 35 185-300 185054 (107) 107 35 400 304092 99

Accessories Medium Voltage 2013 CG Cable entry points for XPE- and paper-insulated cables Cable entry point for junction boxes for transformers and substations. Dimensions CG A CG B Cable accessories for screened cables according to British Standard Scope of delivery Heat-shrink tube 1 Cable entry point Assembly accessories Assembly instructions Ø ² under armouring paper-insulated cable under armouring of XPE-cable CGA 30-46 36-52 183662 CGB 47-75 53-80 183661 100

Accessories Cable accessories for screened cables according to British Standard 101

Medium Voltage 2013 Customised solutions 102

Cable accessories for the industries Page Cable accessories for industries 104 103

Cable accessories for shipyard-industrie Medium Voltage 2013 Cellpack s product portfolio also includes special solutions for the oil and gas, mining and shipbuilding industries as well as for offshore applications.these cable accessories are exposed to rain, salt, chemicals and extreme mechanical loads. The products especially designed for these applications comply with current international norms such as IEC and Cenelec, and with industry specific accreditation requirements. More specific information is available on request. Cable accessories for the shipbuilding industry 104

Cable accessories for shipyard-industrie Cable accessories for the shipbuilding industry 105

Medium Voltage 2013 106

Medium Voltage 2013 We won t leave you in the lurch! Page Heat-shrink tubing 106 Compression cable lugs and Compression connectors complying with DIN 112 Screw cable lugs 119 Earthing components 120 Tapes 123 Tools 127 Chemical products 131 Accessories 107

Heat-shrink tubing Medium Voltage 2013 SRBB Heat-shrink tubing up to 36kV protection for busbar systems and reduction of minimum clearance Medium-walled Stabilized against UV rays Halogen-free Tracking resistant Non-corrosive Resistant to bacteria and fungi Allows for clearance reduction between busbars in medium voltage substations up to 36kV. Corrosion protection Colour(s) red brown Material Cross-linked polyolefin SRBB Recoended application range round Ø Recoended application range Width (B) + Height (H) rectangular min. max. min. max. 19-6 6.5 12 12 18 201942 35-11 13 25 22 36 201943 50-18 18 35 31 60 201944 80-26 28 65 55 95 201945 120-40 45 100 80 150 201946 Accessories Typ SRBB SRBB Internal-Ø Recovered Packing unit wall thickness m before shrinkage after shrinkage piece x m 19-6 1 19 6 2.3 1 x 1 237858 35-11 1 35 11 2.5 1 x 1 237859 50-18 1 50 18 2.7 1 x 1 237860 80-26 1 80 26 2.8 1 x 1 237861 120-40 1 120 40 3 1 x 1 237862 19-6 30 19 6 2.3 1 x 30 (Roll) 201942 35-11 30 35 11 2.5 1 x 30 (Roll) 201943 50-18 30 50 18 2.7 1 x 30 (Roll) 201944 80-26 30 80 26 2.8 1 x 30 (Roll) 201945 120-40 30 120 40 3 1 x 30 (Roll) 201946 108

Heat-shrink tubing Technical Data Value Test Physical properties Density 1.22 g/cm³ IEC 60684-2 Hardness 89 Shore A DIN 53 505 Elongation at break 500 % IEC 60684-2 Tensile strength at break 16 N/² IEC 60684-2 ongitudinal shrinkage +5 % / -10 % IEC 60684-2 Shrink ratio 3:1 IEC 60684-2 Concentricity expanded Concentricity recovered 50 % 85 % IEC 60684-2 Thermal properties Operating temperature range -40 C up to 120 C IEC 60684-2 Shrinkage temperature > 125 C CP-PM-1004* Burning behaviour not self-extinguishing IEC 60684-2 mode C Flexibility at low temperatures -40 C IEC 60684-2 Electrical properties Dielectric strength 20 kv/ IEC 60684-2 Volume resistivity 10 12 Ω x cm IEC 60684-2 Chemical properties Corrosion none IEC 60684-2 Water absorption < 0.15 % IEC 60684-2 Resistance to fungus and decay Ra. 1 IEC 60684-2 Minimum allowance between the busbars: 12kV 17.5kV Busbar (round shaped) without isolation Ph/Ph and Ph/E 120 160 220 320 with isolation Ph/Ph 50 65 90 145 with isolation Ph/E 60 80 120 200 Busbar (rectangular shaped) without isolation Ph/Ph and Ph/E 120 180 220 320 with isolation Ph/Ph 60 80 110 195 with isolation Ph/E 70 100 145 280 24kV 36kV Accessories 109

Heat-shrink tubing Medium Voltage 2013 SRAT Thick wall heat-shrink tubing Shrinkage ratio 3:1 Thick-walled Stabilized against UV rays Halogen-free Non-corrosive Infusible Highly resistant to electrical breakdown Tracking resistance in compliance with IEC 112 High tensile strength Resistant to cold flow (thermally stable) Insulation tube for conductors in terminations of 3.6 to 42 kv Corrosion protection Colour(s) red brown Material Cross-linked polyolefin Free of lead and cadmium Accessories m before shrinkage Internal-Ø after shrinkage Recovered wall thickness Packing unit piece x m in 1m sections 19-6 1 19 6 3 1 x 1 144888 29-9 1 29 9 3 1 x 1 144892 38-12 1 38 12 3.1 1 x 1 144898 SRAT 48-15 1 48 15 3.1 1 x 1 132464 60-20 1 60 20 3.1 1 x 1 144921 80-26 1 80 26 3.1 1 x 1 144935 120-40 1 120 40 3.1 1 x 1 144943 on rolls 19-6 30 19 6 3 1 x 30 (Roll) 144884 29-9 30 29 9 3 1 x 30 (Roll) 144882 SRAT 38-12 30 38 12 3.1 1 x 30 (Roll) 144880 48-15 30 48 15 3.1 1 x 30 (Roll) 144878 60-20 30 60 20 3.1 1 x 30 (Roll) 144886 80-26 30 80 26 3.1 1 x 30 (Roll) 144876 110

Heat-shrink tubing Technical Data Value Test Physical properties Density 1.30 g/cm³ DIN 53 479 Hardness 50 Shore D DIN 53 505 Elongation at break 350 % DIN IEC 15C/590/CD Tensile strength at break 13 N/² DIN IEC 15C/590/CD ongitudinal shrinkage +5% / -15% DIN IEC 15C/590/CD Shrink ratio > 3:1 DIN IEC 15C/590/CD Concentricity expanded Concentricity recovered 50 % 85 % DIN IEC 15C/590/CD Thermal properties Operating temperature range -40 C up to 120 C DIN IEC 15C/590/CD Shrinkage temperature > 125 C CP-PM-1004* Burning behaviour not self-extinguishing DIN VDE 0304 Flexibility at low temperatures -40 C DIN IEC 15C590/CD Effect of thermal ageing (168h at 150 C) on elongation at break 300 % Electrical properties Dielectric strength 16 kv/ DIN VDE 0303 Part 2 Chemical properties Water absorption < 0.15 % Resistance to fungus and decay Ra. 1 DIN IEC 15C/590/CD Accessories 111

Compression cable lugs and Compression connectors complying with DIN Medium Voltage 2013 DV-CU-V Cu compression connector complies with DIN 46267, without separator Strain relief connector (hexagonally compressed) for copper conductor, suitable for joints. Dimensions D = ength D = Centric bore hole Q = Cross section K = Die code no.~outer diameter For RM/SM copper conductors complying with DIN VDE 0295 Material Copper tin-plated Accessories DV-CU-V To be used with suitable compression tool with DIN dies. Fixed price no metal surcharge D Q ² K 6 30 3.8 6 5 125895 10 30 4.5 10 6 125950 16 50 5.5 16 8 125951 25 50 7.0 25 10 125952 35 50 8.2 35 12 125953 50 56 10.0 50 14 125954 70 56 11.5 70 16 125955 95 70 13.5 95 18 125956 120 70 15.5 120 20 125957 150 80 17.0 150 22 125958 185 85 19.0 185 25 125959 240 90 21.5 240 28 125960 300 100 24.5 300 32 125961 400 150 27.5 400 38 125962 500 160 31.0 500 42 125967 625 160 34.5 625 44 125963 800 200 40.0 800 52 125964 1000 200 44.0 1000 58 125965 112

Compression cable lugs and Compression connectors complying with DIN DVZ-CU-V-D Cu compression connector complies with DIN 46267, with separator Strain relief connector (hexagonally compressed) with separator for copper conductor, suitable for joints. Dimensions D = ength D = Centric bore hole Q = Cross section K = Die code no.~outer diameter Especially for transition sleeves and pot end joints For RM/SM copper conductors complying with DIN VDE 0295 Material Copper tin-plated m D Q ² 6 30 3.8 6 6 166374 10 30 4.5 10 6 125966 16 50 5.5 16 8 125897 25 50 7.0 25 10 125898 35 50 8.2 35 12 125899 50 56 10.0 50 14 125900 DVZ-CU-V-D 70 56 11.5 70 16 125901 95 70 13.5 95 18 125902 120 70 15.5 120 20 125903 150 80 17.0 150 22 125904 185 85 19.0 185 25 125905 240 90 21.5 240 28 125906 300 100 24.5 300 32 125907 To be used with suitable compression tool with DIN dies. Fixed price no metal surcharge K Accessories 113

Compression cable lugs and Compression connectors complying with DIN Medium Voltage 2013 DV-A Al Compression connector complies with DIN 46267, without separator Strain relief connector (hexagonally compressed) without separator for aluminium conductor, suitable for joints. Dimensions D RM/SM, SE and RE aluminium conductors complying with DIN VDE 0295 Note *does not comply with DIN Standards = ength D = Centric bore hole Q = Cross section RM = Multi-core stranded round SM = Multi-core stranded sector shaped SE = Sector shaped solid RE = Round solid K = Die code no.~outer diameter Material Blank aluminium Accessories D Q ² K RM/SM SE RE 16* 55 5.8 16 25 16 12 195344 25 70 6.8 25 35 25 12 195345 35 85 8.0 35 50 35 14 195346 50 85 9.8 50 70 50 16 195347 70 105 11.2 70 95 18 125947 95 105 12.6 95 120 22 125948 DV-A 120 105 14.7 120 150 22 125888 150 125 16.3 150 185 25 125889 185 125 18.3 185 240 28 125890 240 145 21.0 240 300 32 125891 300 145 23.3 300 34 125892 400 210 26.0 400 38 195348 500 210 29.0 500 44 195349 To be used with suitable compression tool with DIN dies. Fixed price no metal surcharge 114

Compression cable lugs and Compression connectors complying with DIN DVZ-A-D Al Compression connector complies with DIN 46267, with separator Strain relief connector (hexagonally compressed) with separator for aluminium conductor. Dimensions D RM/SM, SE and RE aluminium conductors complying with DIN VDE 0295 Especially for transition sleeves and pot end joints = ength D = Centric bore hole Q = Cross section RM = Multi-core stranded round SM = Multi-core stranded sector shaped SE = Sector shaped solid K = Die code no.~outer diameter Material Blank aluminium D RM/SM Q ² K SE 16 75 5.4 16 25 12 198217 25 75 6.8 25 35 12 198219 35 90 8.0 35 50 14 198220 50 90 9.8 50 70 16 198221 70 110 11.2 70 95 18 198222 DVZ-A-D 95 110 13.2 95 120 22 198223 120 110 14.7 120 150 22 198225 150 130 16.3 150 185 25 198226 185 130 18.3 185 240 28 198228 240 150 21.0 240 300 32 198230 300 155 23.3 300 34 198232 To be used with suitable compression tool with DIN dies. Fixed price no metal surcharge Accessories 115

Compression cable lugs and Compression connectors complying with DIN Medium Voltage 2013 DK-CU-V Cu compression cable lug complies with DIN 46235 Cable lugs (hexagonally compressed) for copper conductors, suitable for indoor terminations. Dimensions D D1 B = ength B = Width D = Centric bore hole D1 = Flat hole diameter Q = Cross section K = Die code no.~outer diameter Cable lugs for RM/SM copper conductors complying with DIN VDE 0295 Note *does not comply with DIN Standards Material Copper tin-plated Test standard DIN 46235, Cable lugs for compression connections (lug mould for copper conductor) Accessories B 6/6 24 8.5 3.8 6.4 6 5 126040 10/8* 27 13.0 4.5 8.4 10 6 126044 16/8 36 13.0 5.5 8.4 16 8 126046 16/12* 36 18.0 5.5 13.0 16 8 126048 25/10 38 17.0 7.0 10.5 25 10 126051 25/12 38 19.0 7.0 13.0 25 10 126052 35/10 42 19.0 8.2 10.5 35 12 126054 35/12 42 21.0 8.2 13.0 35 12 126055 50/10 52 22.0 10.0 10.5 50 14 126059 50/12 52 24.0 10.0 13.0 50 14 126060 70/10 55 24.0 11.5 10.5 70 16 126064 70/12 55 24.0 11.5 13.0 70 16 126065 95/12 65 28.0 13.5 13.0 95 18 126070 DK-CU-V 95/16 65 32.0 13.5 17.0 95 18 126072 120/12 70 32.0 15.5 13.0 120 20 126074 120/16 70 32.0 15.5 17.0 120 20 126077 150/12 78 34.0 17.0 13.0 150 22 126080 150/16 78 34.0 17.0 17.0 150 22 126082 185/12 82 37.0 19.0 13.0 185 25 126085 185/16 82 37.0 19.0 17.0 185 25 126087 240/12 92 42.0 21.5 13.0 240 28 126089 240/16 92 42.0 21.5 17.0 240 28 126091 300/14* 100 48.0 24.5 15.0 300 32 126093 300/16 100 48.0 24.5 17.0 300 32 126094 400/16 115 55.0 27.5 17.0 400 38 126096 500/16* 125 60.0 31.0 17.0 500 42 126098 625/16* 135 60.0 34.5 17.0 625 44 126099 800/20 165 75.0 40.0 21.0 800 52 126102 To be used with suitable compression tool with DIN dies. Fixed price no metal surcharge D D1 Q ² K 116

Compression cable lugs and Compression connectors complying with DIN DK-CU-V-D Cu compression cable lug complies with DIN 46235, blocked Cable lugs Cu (hexagonal compression type) for copper conductors, designed for outdoor terminations. Dimensions D D1 B Cable lugs for RM/SM copper conductors complying with DIN VDE 0295 Note *does not comply with DIN Standards = ength B = Width D = Centric bore hole D1 = Flat hole diameter Q = Cross section K = Die code no.~outer diameter Material Copper tin-plated Test standard DIN 46235, Cable lugs for compression connections (lug mould for copper conductor) DK-CU-V-D B To be used with suitable compression tool with DIN dies. Fixed price no metal surcharge D D1 Q ² K 16/12* 36 18 5.5 13.0 16 8 159667 25/10 38 17 7.0 10.5 25 10 126134 35/12 42 21 8.2 13.0 35 12 159670 50/12 52 24 10.0 13.0 50 14 126135 70/12 55 24 11.5 13.0 70 16 148432 95/12 65 28 13.5 13.0 95 18 126136 120/12 70 32 15.5 13.0 120 20 195350 150/16 78 34 17.0 17.0 150 22 126137 185/16 82 37 19.0 17.0 185 25 195351 240/16 92 42 21.5 17.0 240 28 126138 300/16 100 46 24.5 17.0 300 32 176369 400/16 115 54 27.5 17.0 400 38 126105 500/16* 125 60 31.0 17.0 500 42 126106 Accessories 117

Compression cable lugs and Compression connectors complying with DIN Medium Voltage 2013 DK-A-D Al compression cable lug complies with DIN 46329, blocked Cable lugs (hexagonally compressed) for aluminium conductors, suitable for indoor and outdoor terminations. Dimensions D D1 B Note *does not comply with DIN Standards = ength B = Width D = Centric bore hole D1 = Flat hole diameter Q = Cross section RM = Multi-core stranded round SM = Multi-core stranded sector shaped SE = Sector shaped solid RE = Round solid K = Die code no.~outer diameter Material Blank aluminium Test standard DIN 46329, Cable lugs for compression connections (circular mould for aluminium conductor) Accessories DK-A-D B To be used with suitable compression tool with DIN dies. Fixed price no metal surcharge D D1 Q ² RM/SM RE SE K 16/10* 50 20 5.4 10.5 16 16 25 12 194950 25/10 50 25 6.8 10.5 25 25 35 12 194949 25/12 50 25 6.8 13.0 25 25 35 12 194947 35/10 62 25 8.0 10.5 35 35 50 14 194945 35/12 62 25 8.0 13.0 35 35 50 14 194944 50/12 62 25 9.8 13.0 50 50 70 16 194943 70/12 72 25 11.2 13.0 70 95 18 194942 95/12 75 25 12.6 13.0 95 120 22 194941 95/16* 80 30 12.6 17.0 95 120 22 194940 120/12 80 30 14.7 13.0 120 150 22 194939 120/16 80 30 14.7 17.0 120 150 22 194938 150/12 90 30 16.3 13.0 150 185 25 194937 150/16 90 30 16.3 17.0 150 185 25 194936 185/12 91 30 18.3 13.0 185 240 28 194935 185/16 91 30 18.3 17.0 185 240 28 194934 240/16 103 38 21.0 17.0 240 300 32 194933 300/16 103 38 23.3 17.0 300 34 194932 400/20 116 38 26.0 21.0 400 38 194930 500/20 122 44 29.0 21.0 500 44 194908 118

Screw cable lugs CSK Screw cable lugs for Cu and AI blocked, aluminium tin-plated with shear bolts Screw cable lugs for RM, RE, SM, and SE aluminium and copper conductors, suitable for indoor and outdoor terminations. Dimensions Note *CSK 240-400 : RM/RE cross section from 240 to 400 ², SM/SE cross section from 240 to 300². Cellpack counter bracket 255404 recoended for installation. = ength 1 = Centric bore hole D = Outer diameter D1 = Flat hole diameter D2 = Bore hole diameter Q = Cross section S = Number of bolts Material Aluminium, tin-plated Test standard EN 61238-1 1 D 6-50 65 30 22.0 13 9 6-50 1 255414 16-95 65 30 22.0 13 13 16-95 1 255415 CSK 50-150 80 35 26.0 13 16 50-150 1 255416 95-240 110 60 33.0 13 20 95-240 2 289968 240-400* 135 75 40.0 17 26 240-400 2 255418 Other screw connectors available to order. Fixed price no metal surcharge D1 D2 Q ² S Accessories 119

Earthing components Medium Voltage 2013 EGA Earthing accessories for cables with tape screen and/or armouring for terminations EGA earthing kits for terminations for single-core cables with copper braid or aluminium screen (Fig. 1), and for unarmoured three-core cables (Fig. 3). Kit components: 3 flat-rolled copper wires and 3 pressure springs Dimensions 1 2 Quick, safe and easy assembly Superior electrical properties High mechanical strength Suitable for indoor and outdoor use Earthing continuity and earth contactor For cast resin, heat-shrink and slip-on cable accessories Enables solder-free electrical connection of metal cable components (screen, armouring, metal sheath). Note 1) Single core cables with copper tape or aluminium screens, non armoured. 2) Single core cables with copper tape or aluminium screens, armoured: Please order extra pressure spring ZR1. 3) Three core cables with copper tape or aluminium screens, non armoured. 4) Three core cables with copper tape or aluminium screens, armoured: Please order extra pressure spring ZR2. Scope of delivery Copper wire Pressure spring 3 4 S = external semi-conducting layer BS = Cu-Tape screen KM = Cable sheath RF = RF pressure spring ES = Cu-Earthing wire, flat tin-plated AR = Armouring ZR = Additional type RF pressure spring Accessories EGA Pressure spring Copper braid Ø of hole Nominal cross section ² For armoured cables, please order the pressure springs separately. Nominal cross section ² 7.2 kv 12 kv 17.5 kv 24 kv 36 kv ZR1 ZR2 16-2 500 RF 2 8.5 16 150 120 70 50 RF 3 RF 5 143502 16-3 500 RF 3 8.5 16 150-240 120-240 95-185 70-150 120 RF 4 RF 5 143503 25-3 500 RF 3 10.5 25 150-500 120-500 95-300 70-300 70-240 RF 4 RF 6 143505 25-4 500 RF 4 10.5 25 150-300 RF 5 RF 6 143506 35-4 500 RF 4 10.5 35 500-1000 500-1000 400-800 300-800 185-500 RF 5 RF 6 143508 35-5 500 RF 5 10.5 35 800-1000 800-1000 500-1000 RF 6 143509 120

Earthing components AUF Armour continuity for three-core joints Armour continuity kit for armoured three-core polymeric cables. Dimensions = ength 1. Pressure spring 2. Copper wire 3. Pressure spring Quick, safe and easy assembly Superior electrical properties High mechanical strength Earthing continuity and earth contactor For cast resin, heat-shrink and slip-on cable accessories Enables solder-free electrical connection of metal cable components (screen, armouring, metal sheath). Scope of delivery Copper wire Pressure springs Pressure spring Nominal cross section ² Copper braid 7.2kV 12kV 17.5kV 24kV 36kV AUF 5 1200 RF 5 35 300 240 240 150 70 195367 AUF 6 1200 RF 6 35 400 300-400 300-400 185-300 95-300 195368 For armoured cables, please order the pressure springs separately. Accessories 121

Earthing components Medium Voltage 2013 RF Pressure spring Corrosion-resistant Fatigue-proof Guarantees consistent radial contact stress For cast resin, heat-shrink and slip-on cable accessories Enables solder-free electrical connection of metal cable components (screen, armouring, metal sheath) and earthing materials (copper grounding wire, cooper mesh sleeve) Colour(s) brass Material Special stainless steel Accessories Width Pressure springs are no current-carrying parts. External-Ø Cable-Ø RF 2 16 17.5 17-28 126296 RF 3 16 21.5 24-37 126297 RF 4 16 29.0 33-49 126298 RF 5 20 37.8 44-70 126299 RF 6 20 51.3 55-92 126300 122

Tapes No. 60, No. 62 High-voltage insulation tape self-amalgamating, pliable Easy application Fuses to form a homogeneous, cavity-free compound within a short space of time. Fully removable Durable Ozone-resistant No electrolytic corrosion Non tacky Extremely ductile Superior electrical properties Excellent adherence to a wide range of substances Superior physical properties Weatherproof Sealing of casting moulds Padding of cable insulation Conductor insulation for plastic-insulated cables up to 69 kv Repairing and connection of various insulating and cable materials e.g. PE, XPE, EPR, PVC, butyl, neoprene Colour(s) black Material EPR-Base ength m Width Thickness No. 60 10 19 0.5 125533 10 19 0.75 145908 No. 62 5 38 0.75 125584 10 38 0.75 125589 Accessories Technical Data Value Elongation at break 900 % Tensile strength at break 3 N/² Dielectric constant 2.8 Dissipation factor (50Hz) 0.0060 Dielectric strength 42 kv/ Volume resistivity 10 12 Ω x cm Temperature range -40 C up to 100 C Water absorption 0.05 % 123

Tapes Medium Voltage 2013 No. 61 Conductive tape highly elastic, self-amalgamating Printed CAUTION-CONDUCTING TAPE to eliminate danger of confusion Fuses to form a homogeneous, cavity-free compound within a short space of time. Durable Ozone-resistant No electrolytic corrosion Self-fusing Highly flexible Superior physical properties Repairing of semi-conducting layer in medium voltage cables Electrical field smoothing For smoothing rough surfaces of connectors and cable lugs Colour(s) black Material EPR-Base Accessories No. 61 ength m Width Thickness 9.1 19 0.76 125590 4.6 19 0.76 125604 Technical Data Value Elongation at break 900 % Tensile strength at break 3 N/² Volume resistivity 10 Ω x cm Temperature range -40 C up to 100 C 124

Tapes No. 63 Copper braid tape tinned Wrinkle-free application to all contours High flexibility Break-proof Earthing continuity and earth contactor Electrostatic shielding continuity Semi-conducting continuity for connectors Voltage grading continuity Colour(s) silver Material Braided tinned copper wires No. 63 ength m Width Thickness 25 x 9.1m 9.1 25 0.5 126303 25 x 5m 5.0 25 0.5 126313 60 x 10m 10.0 60 0.5 126316 60 x 5m 5.0 60 0.5 126315 Accessories 125

Tapes Medium Voltage 2013 No. 72 Repair tape Self-fusing 100% waterproof Superior electrical properties High tensile strength Repairing of damaged sheaths of all plastic- and rubber-insulated cables and conductors Note The use of a repair joint such as MZ is mandatory in case of damage extending beyond the cable sheath to the core insulation, screen or armour. Colour(s) black ength m Width Thickness No. 72 10 25 0.75 125587 Accessories 126

Tools CPB Heat-shrink torch kit User-friendly rotating tube connector Gas supply shuts off automatically if burner head not installed Minimal risk of overheating Flame extinguished iediately upon releasing push button Continuously adjustable flame Bayonet fitting facilitates substitution of burner head Quick-starting piezo ignition Suitable for thick wall adhesive-lined heat-shrink tubing Shrinking of heat-shrinkable polyolefin products using flame or hot air on pre-extruded compound Caution note Warning: liquid gas is heavier than air. Adhere strictly to safety instructions provided with heat-shrink torch kit. Scope of delivery Wooden case with aluminium profile Handle Angulated hot-air torch Angulated heat-shrink torch Angulated needle point burner 3 x R 3 pressure control device, 8 li Anti-rupture device for tubing Gas tube Open-end spanner SW 17/19 Small gas bottle (0.4l content), incl. tube connection valve and suspension hook (CPB6) Refill connector for a small gas bottle (CPB6) 3 x DIN Kombi pressure control device (CPB5 8 li) ength m Content ml CPB 5 (Set) * 146765 CPB 6 (Set) * 146766 Handle CPB 5/6 with piezo ignition 146781 Needle point burner 146782 Heat-shrink torch 146783 Hot-air torch 146784 Gas tube HD 4.4 R 3/8 H x R 3/8 H 4 146769 Anti-rupture device for tubing R 3/8 x 3/8 H 146770 Pressure balance R 3/8 x 3/8 H 146780 Pressure balance DIN/Kombi 21,8-14 H x R 3/8 H 123960 Refill connector, DIN Kombi 146786 Small gas bottle, refillable 400 146785 Delivered in an aluminium side-faced wooden case. Components can also be ordered separately. Accessories 127

Tools Medium Voltage 2013 Clamp tool Assembly guide for CSV screw connectors and CSK screw cable lugs Assembly guide for CSV screw connectors and CSK screw cable lug with a diameter 14-40. Scope of delivery Clamp tool Tool for diameter reduction Clamp tool CSV/CSK 255404 Accessories 128

Tools CP-FM20 Multi tool The CP-FM20 is designed for the cutting and stripping of outer cable sheaths and conductor insulation, in addition to cold-strippable semi-conducting layers. Suitable for cables with a diameter of 15-50 For cold-strippable conducting layer. 0.3/0.4 or 0.7/0.8 according to thickness of material Adjustable stop and limiting bar Cut depth of the insulation and external sheath up to 10 Suitable for PVC/PE/XPE insulation Adjustable feed motion Cutting and stripping of outer sheath Controlled initial cutting of cold-strippable semi-conducting layer Cutting and stripping of conductor insulation Scope of delivery Allen key Carrying case CP-FM20 Multi-tool CP-FM 20-S1 (for cable sheath) 250355 Replacement cutter CP-FM 20-S2 (for semiconductor-layer) 250358 Multitool CP-FM 20 250351 Accessories 129

Tools Medium Voltage 2013 CP-P20 Peeling tool For removal of the co-extruded semi-conducting layer of medium voltage cables. Minimum strip length ca.30 Stripping depth adjustable from 0-1,2 in 0,1 steps Maintains high quality of stripped surface Hard metal peeling knife Operating range 10-50 Predefined rounded corners Begin stripping at cable end Automatic working feed Cutting and stripping of solid extruded semi-conducting layer. Accessories ength Width Height Case assembly 200 300 90 255897 Peeling tool CP-P 20 250354 130

Chemical products UNIVERSA CEANER 121 Detergent For use with Neoprene, Polyethylene, EPR, XPE, PVC; Butyl rubber and thermoplastic insulation Protection against accidental discharge Cleans and degreases without leaving residue. Non-conductive Fast-acting, safe No degradation Cleaning of semi-conducting layers Removal of semi-conductive residues (such as graphite) Cleaning and degreasing of motors and electrical equipment Cleaning of cables and conductors Note Clean all parts thoroughly. Air dry or wipe with a cloth. Repeat operation as required. Always test a small area prior to cleaning plastics or finished surfaces. Colour(s) clear Universal Cleaner Content l No.121 0.4 146404 No.121 1 124026 No.121 5 124027 No.121 20 146405 No.121 200 124029 Accessories Technical Data Value Density 0.62 g/cm 3 Vapour pressure (at 20 C) 200 hpa Flash point -19 C Ignition temperature 260 C ower explosion limit (Vol.-%) 1.1 Upper explosion limit Vol.-% 13.0 131

Chemical products Medium Voltage 2013 ZINC SPRAY 171 Anti-corrosion spray Zinc spray No. 171 binds to steel and iron surfaces using an electrochemical application to build a flexible protection film. This gives the parts an active cathodic corrosion protection. Smooth, fine porous film With hydrocarbon propellant (flaable) Varnishable Can be spot-welded Dries quickly Unmarked in compliance with ARB material regulations No hazard rating, in compliance with VBF Weatherproof Electrically conductive Frost-resistant ong-lasting corrosion protection Repairing of damaged zinc layer Repairing of galvanised surfaces Substitute for red lead primer Primer for use in auto repair Sealing of cavities Cold galvanising Oxidation protection Rust prevention Underground protection Colour(s) grey Accessories Content l Zinc spray No.171 0.4 124030 Zinc spray No. 171 is not approved according to the the food regulations and the construction material norms release 8/76 from the Institute for Construction Technology. Technical Data Value Density 0.95 g/cm 3 Degree of zinc purity 99 % 132

Chemical products INDUSTRIE 3-36 Protective agent Forms a clear, transparent film ubricates and permeates Dissolves rust Corrosion protection Protection of ferrous and non-ferrous metals during storage, processing, and transport Release of tightly-sealed components Moisture protection Farbe green Industrie 3-36 Content l 0.4 124014 5 124015 20 124016 200 124013 Accessories Technical Data Value Density 0.81 g/cm 3 Viscosity (cp) 30/40 C Flash point 105 C Dielectric strength 180 kv/ 133

Chemical products Medium Voltage 2013 Easy Glide ubricant Easy-Glide simplifies and accelerates the feeding of cables through electrical installation conduits and cable ducts. Damage to the outer sheath is thus avoided. Available in light, practical 1050 ml plastic bottle or in handy 5 litre-buckets Agreeable odour Harmless ingredients Biologically degradable Non-corrosive Superior lubricating properties Non-adherent and does not stain Does not cause skin irritation, easily washable Nonflaable ubricant for feeding cables and wires through electrical installation conduits Accessories Drum Content l 1050ml Plastic bottle 1.05 219647 Easy Glide 5000ml Bucket 5 246993 Easy-Glide can be used with bare hands. Apply evenly. Technical Data Value max. Heat resistance 80 C 134

Chemical products Easy Clean Hand wipes Easy Clean combines a powerful cleaning solution with a microfiber cloth developed especially for thorough wiping. The special Easy Clean cleaning solution dissolves grime but is gentle on hands. It removes heavy fat stains, grease, glue, oil, tar, asphalt, ink, wax, carbon stains, graphite, grass stains and resin, amongst others. Heavy-duty one-step cleaning system Easily removes even the toughest stains Retains dirt without leaving traces Quick-drying cleaning solution with moisturising effect Biodegradable wipes Antibacterial Free from harmful substances Non-toxic Nonirritant Contains moisturising substances To remove ingrained dirt apply the darker side of the cloth. eave to soak in, then rub. If the stain has not come out, leave to soak for longer Remove most of the dirt using the darker textured side of the cloth, then polish with the soft side to achieve a completely clean residue-free finish Skin may feel slightly sticky after use due to moisturising emulsion, as absorption time varies according to skin type Note For external use only Avoid contact with eyes Keep dispenser away from heat sources Keep out of reach of children Easy Clean Content Piece Sales display 40 265196 in plastic dispenser 72 264705 Accessories 135

136 Medium Voltage 2013

Ahead through groundbreaking technology Page index 138 Catalogue number index 140 Index 137

Index A Accessory Kit for CTS 630A Cellplux Plug-In Cable Connectors...54 Al compression cable lug...118 Al Compression connector...114, 115 Anti-corrosion spray...132 Armour continuity for three-core joints...98, 121 Assembly guide for CSV screw connectors and CSK screw cable lugs...128 AUF...121 AUF(BS)...98 C Cable entry points for XPE- and paper-insulated cables...100 CAE-3F...68 CAE-3I...67 CAE-F...44 CAE-I...42 CAESK-F...43 CAESK-I...41 CAM3-S...62 CAM-S...35 CG...100 CGS 250A...46 CHE-3F(A)...64 CHE-3F(B)...66 CHE-3F(BS)...97 CHE-3I(A)...63 CHE-3I(B)...65 CHE-3I(BS)...96 CHE-F...39 CHE-F(BS)...95 CHE-I...37 CHE-I...94 CHEP(3Pb)-3F...88 CHEP(3Pb)-3I...87 CHEP(H)-3F...83 CHEP(H)-3I...82 CHEP-3F...78 CHEP-3I...77 CHM...33 CHM(BS)...92 CHM3...61 CHM3(BS)...93 CHMP(3Pb) 3...85 CHMP(3Pb) 3-1...84 CHMP(H) 3...80 CHMP(H) 3-1...79 CHMPP(3Pb)3...86 CHMPP(H)3...81 CHMPPR3...76 CHMPR 3...75 CHMPR 3-1...74 CHMPRSV 3-1...73 CHMSV...32 CHMSV3...59 CHMSV3-1...60 CIK...53 CKM...36 CKS 630A...56 Clamp tool...128 Conductive tape...124 Connector element up to 24kV...47 Copper braid tape...125 Coupling connector 630A up to 24kV...56 CPB...127 CPES...57 CP-FM20...129 CP-P20...130 CPS...58 CSK...119 CTKS 630A...50 CTKSA...51 CTKSA...52 CTS 630A...49 Cu compression cable lug...116, 117 Cu compression connector...112, 113 CVS 250A...47 CWS 250A...45 CWS 400A...48 D Detergent...131 DK-A-D...118 DK-CU-V...116 DK-CU-V-D...117 DV-A...114 DV-CU-V...112 DVZ-A-D...115 DVZ-CU-V-D...113 E Earthing accessories...99, 120 Easy Clean...135 Easy Glide...134 EGA...120 EGA(BS)...99 Elbow plug-in cable connector...48 Elbow plug-in cable connector with capacitive measurement...45 H Hand wipes...135 Heat-shrink torch kit...127 Heat-shrink tubing up to 36kV...108 High-voltage insulation tape...123 I Indoor termination...77, 82, 87 INDUSTRIE 3-36...133 ubricant...134 M M...MS6...27 M...MSPB6...72 Mounting Ring...55 Multi tool...129 138

N No. 60, No. 62...123 No. 61...124 No. 63...125 No. 72...126 O Outdoor termination...78, 83, 88 Z ZINC SPRAY 171...132 ZS-CTS...54 P Peeling tool...130 Plug- In Surge Arrester...51, 52 Pressure spring...122 Protective agent...133 R Repair tape...126 RF...122 S Screw cable lugs for Cu and AI...119 SEEV...28 SEEV-F...29 Single-core indoor termination...37, 42, 94 Single-core indoor termination with screw cable lugs...41 Single-core outdoor termination...39, 44, 95 Single-core outdoor termination with screw cable lugs...43 Single-core straight-through joint...33, 35, 92 Single-core straight-through joint with screw connector...32, 36 SMH3MS6...26 SRAT...110 SRBB...108 Straight plug-in cable connector with capacitive measurement...46 Straight-through joint...76, 81, 86 Straight-through joint with screw connector...60 T Test and Earthing Kit...57 Test-Kit...58 Thick wall heat-shrink tubing...110 Three-core indoor termination...28, 63, 65, 67, 96 Three-core outdoor termination...29, 64, 66, 68, 97 Three-core straight-through joint...26, 27, 61, 93 Three-core straight-through joint with heat-shrink outer protection...62 Three-core straight-through joint with screw connector...59 Three-core transisition joint...72 T-plug and socket connexion...50 Transition joint 73, 74, 75, 79, 80, 84, 85 T-socket connexion...49 U UNIVERSA CEANER 121...131 Index V Voltage-proof Insulating Cap...53 139

123960...127 124013...133 124014...133 124015...133 124016...133 124026...131 124027...131 124029...131 124030...132 124318...27 124319...27 124320...27 124334...72 124335...72 125533...123 125584...123 125587...126 125589...123 125590...124 125604...124 125888...114 125889...114 125890...114 125891...114 125892...114 125895...112 125897...113 125898...113 125899...113 125900...113 125901...113 125902...113 125903...113 125904...113 125905...113 125906...113 125907...113 125947...114 125948...114 125950...112 125951...112 125952...112 125953...112 125954...112 125955...112 125956...112 125957...112 125958...112 125959...112 125960...112 125961...112 125962...112 125963...112 125964...112 125965...112 125966...113 125967...112 185050...99 185051...99 185052...99 185053...99 185054...99 193339...34 193370...34 193372...40 193374...40 193414...38 193416...38 194017...38 194018...38 194019...38 194030...38 194031...38 194032...38 194033...38 194034...38 194035...38 194036...38 194037...38 194038...38 194039...38 194040...38 194041...38 194042...38 194043...38 194044...38 194045...38 194046...38 194047...38 194048...38 194049...40 194050...40 194051...40 194052...40 194053...40 194054...40 194055...40 194056...40 194057...40 194058...40 194059...40 194061...40 194062...40 194063...40 194064...40 194065...40 194066...40 194067...40 194068...40 194069...40 194070...40 194071...40 194072...34 194073...34 126040...116 126044...116 126046...116 126048...116 126051...116 126052...116 126054...116 126055...116 126059...116 126060...116 126064...116 126065...116 126070...116 126072...116 126074...116 126077...116 126080...116 126082...116 126085...116 126087...116 126089...116 126091...116 126093...116 126094...116 126096...116 126098...116 126099...116 126102...116 126105...117 126106...117 126134...117 126135...117 126136...117 126137...117 126138...117 126296...122 126297...122 126298...122 126299...122 126300...122 126303...125 126313...125 126315...125 126316...125 132464...110 143502...120 143503...120 143505...120 143506...120 143508...120 143509...120 144876...110 144878...110 144880...110 144882...110 144884...110 144886...110 144888...110 144892...110 144898...110 144921...110 144935...110 144943...110 145458...28 145461...28 145464...28 145630...26 145633...26 145635...26 145908...123 146158...63 146159...63 146160...63 146216...63 146217...63 146218...63 146220...64 146222...64 146224...64 146226...64 146228...63 146234...64 146235...64 146242...64 146296...64 146297...63 146298...64 146300...63 146301...63 146302...63 146303...64 146304...64 146306...64 146404...131 146405...131 146765...127 146766...127 146769...127 146770...127 146780...127 146781...127 146782...127 146783...127 146784...127 146785...127 146786...127 148152...29 148153...29 148432...117 159667...117 159670...117 166374...113 171756...64 171757...64 171761...63 171762...63 171763...63 171791...28 173132...65 173134...65 176369...117 180522...65 182390...29 182731...65 182732...65 182733...65 182734...65 182735...66 182736...66 182737...66 182738...66 183661...100 183662...100 184472...66 184796...65 184797...65 184798...65 184799...65 184800...65 184801...65 184802...65 184803...65 184805...66 184806...66 184807...66 184808...66 184809...66 184811...66 184812...66 184813...66 184815...66 184816...66 123... 124... 125... 126... 132... 143... 144... 145... 146... 148... 159... 166... 171... 173... 176... 180... 182... 183... 184... 185... 193... 194... 140 Medium Voltage 2013 Index

194074...34 194075...34 194076...34 194077...34 194078...34 194079...34 194080...34 194082...34 194083...34 194085...34 194086...34 194087...34 194088...34 194089...34 194090...34 194091...34 194092...34 194093...34 194094...34 194293...61 194294...61 194295...61 194296...61 194297...61 194298...61 194299...61 194300...61 194301...61 194302...61 194303...61 194304...61 194305...61 194306...61 194307...61 194908...118 194930...118 194932...118 194933...118 194934...118 194935...118 194936...118 194937...118 194938...118 194939...118 194940...118 194941...118 194942...118 194943...118 194944...118 194945...118 194947...118 194949...118 194950...118 195344...114 195345...114 195346...114 195347...114 195348...114 195349...114 195350...117 201944...108 201944...108 201945...108 201945...108 201946...108 201946...108 219647...134 220775...49 224826...49 224853...56 225844...47 237858...108 237859...108 237860...108 237861...108 237862...108 246176...48 246993...134 247102...48 248716...93 248717...93 248718...93 248719...93 248770...93 249191...97 249192...97 249193...97 249194...97 249195...97 249328...96 249331...96 249332...96 249333...96 249334...96 249464...97 249466...97 249468...96 249469...96 249471...93 249474...93 249476...93 250351...129 195351...117 195365...63 195366...64 195367...121 195368...121 195369...98 195380...98 195381...98 195382...98 197515...77 197516...77 197517...77 197531...82 197532...82 197533...82 197534...82 197535...82 197536...82 197537...78 197538...78 197539...78 197543...83 197544...83 197545...83 197546...83 197547...83 197548...83 197555...87 197556...87 197557...87 197558...87 197559...87 197560...87 197567...88 197568...88 197569...88 197570...88 197571...88 197572...88 197603...74 197604...74 197606...74 197607...79 197608...79 197609...79 197610...79 197614...79 197616...79 197617...79 197618...75 197619...75 197620...75 197621...80 197622...80 197623...80 197624...80 197625...80 197626...80 197627...80 197628...84 199158...42 199159...42 199160...42 199162...42 199163...42 199164...42 199165...42 199166...42 199167...42 199168...42 199170...67 199171...67 199173...67 199174...67 199175...67 199177...67 199178...67 199179...67 199180...67 199181...67 199182...67 199184...44 199185...44 199186...44 199187...44 199189...44 199190...44 199191...44 199192...44 199194...44 199195...44 199196...44 199197...44 199198...44 199199...44 199201...68 199202...68 199204...68 199205...68 199206...68 199208...68 199209...68 199210...68 199211...68 199212...68 201374...62 201375...62 201377...62 201379...62 201381...62 201382...62 201385...35 201386...35 201388...35 201393...35 201395...35 201942...108 201942...108 201943...108 201943...108 197629...84 197630...84 197631...84 197632...84 197633...84 197634...84 197635...84 197636...84 197637...84 197638...85 197639...85 197640...85 197641...85 197642...85 197643...85 197644...85 197645...85 197646...85 197647...85 197658...76 197659...76 197660...76 197661...81 197662...81 197663...81 197664...81 197665...81 197666...81 197667...81 197668...86 197669...86 197670...86 197671...86 197672...86 197673...86 197674...86 197675...86 197676...86 197677...86 198217...115 198219...115 198220...115 198221...115 198222...115 198223...115 198225...115 198226...115 198228...115 198230...115 198232...115 198782...84 198783...85 198784...86 199151...42 199152...42 199154...42 199155...42 199157...42 195... 197... 198... 199... 201... 219... 220... 224... 225... 237... 246... 247... 248... 249... 250... 141 Medium Voltage 2013 Index

250354...130 250355...129 250358...129 250711...49 250715...49 250720...48 250726...48 251713...36 252101...36 253843...92 253844...92 253845...92 253847...94 253848...95 253849...94 253850...95 253911...93 253917...93 253929...93 255404...128 255414...119 255415...119 255416...119 255418...119 255897...130 256010...49 256328...49 256838...50 256839...50 257581...50 257582...50 257622...54 258130...32 258131...32 258132...32 258133...32 258135...32 258136...32 258137...32 258138...32 258140...32 258141...32 258142...32 258143...32 258144...32 258145...32 258146...32 259101...57 262054...51 262055...51 262056...51 262816...51 264366...55 264705...135 264769...73 264988...73 265023...53 265024...53 265196...135 265205...73 265501...73 289894...43 289897...43 289898...43 289899...43 289900...43 289901...43 289902...43 289903...43 289904...43 289905...43 289906...43 289907...43 289908...43 289909...43 289910...43 289911...43 289912...43 289945...41 289947...41 289948...41 289949...41 289950...41 289951...41 289952...41 289953...41 289954...41 289955...41 289956...41 289957...41 289958...41 289959...41 289960...41 289961...41 289962...41 289963...41 289968...119 293792...45 293797...46 295167...45 295283...46 297104...59 297260...59 297310...59 297311...59 297348...59 297349...59 297350...59 297351...59 297352...59 297353...59 297358...59 297360...59 297361...59 297362...59 297433...59 297441...60 297442...60 297443...60 297444...60 297449...60 297460...60 297461...60 297462...60 297463...60 297464...60 297465...60 297466...60 297467...60 297468...60 297469...60 301492...52 302227...58 302732...49 304089...98 304092...99 251... 252... 253... 255... 256... 257... 258... 262... 259... 264... 265... 289... 132... 295... 297... 301... 302... 304... 142 Medium Voltage 2013 Index

Index 143

Cellpack AG Electrical Products Anglikerstrasse 99 5612 Villmergen Schweiz Tel. +41 56 618 12 34 Fax +41 56 618 12 45 verkauf.ep@cellpack.com Cellpack GmbH Carl-Zeiss-Straße 20 79761 Waldshut-Tiengen Deutschland Tel. +49 7741 6007-0 Fax +49 7741 64989 electrical.products@cellpack.com Cellpack Benelux B.V. Keersluisweg 13 1332 EE Almere Buiten Nederland Tel. +31 36 549 03 36 Fax +31 36 532 74 99 info@cellpack.nl Cellpack Far East (PTE) TD. 128 Joo Seng Road # 06 01 Singapore 368356 Tel. +65 6747 7024 Fax +65 6841 4554 info@cellpack.com.sg Behr Bircher Cellpack BBC Malaysia Sdn. Bhd. No. 8, Jalan TU 50 Taman Tasik Utama Ayer Keroh 75450 Melaka Malaysia Tel. + 60 6 251 95 30 Fax + 60 6 251 95 31 info@cellpack.com.my.my Behr Bircher Cellpack Ibérica, S.A. C/.Mas Pujol, nr. 47 Nave 4 Pol. Ind. Sector V 08520 es Franqueses del Vàllès Barcelona España Tel. +34 93 846 63 76 Fax +34 93 849 12 06 comercial@cellpackiberica.com Behr Bircher Cellpack BBC France s.à.r.l. 277, Boulevard des Technologies 54710 udres France Tel. +33 3 83 25 60 07 Fax +33 3 83 25 88 27 info@cellpack-ep.fr Cellpack Polska Sp. z o.o. ul. Matuszewska 14, 03-876 Warszawa Polska Tel. +48 022 853 53 54 Fax +48 022 853 53 56 biuro@cellpack.pl