ERD Electric Rod-Style ctuator PTENT PENDING LINER SOLUTIONS MDE ESY
mx ERD Electric Rod-Style ctuator What is the ERD? The ERD is an economical rod-style electric actuator designed as an alternate to non-repairable pneumatic cylinders and an option for automating manual processes.the ERD is compatible with many NEM standard stepper and servo motors to create a flexible, powerful electric actuator solution. RODLESS TUTORS IR IM ROD STYLE TUTORS Tolomatic s ELETRI Rod-Style actuators ERD IR Smartctuator RS GS IM GEROX SwItH ONTROL SYSTEMS + Thrust up to: Speed up to: Stroke Length up to: Rod-Style ctuator 75 lbf [334 N] 4 in/sec [116 mm/sec] 12 in [35 mm] Integrated ontrol Rod-Style ctuator 72 lbf [322.7 N] 25 in/sec [635 mm/sec] 24 in [69 mm] Rod-Style ctuator 7, lbf [31,138 N] 123 in/sec [3,124 mm/sec] 6 in [1,524 mm] Guided Rod-Style ctuator 2,7 lbf [12,1 N] 123 in/sec [3,124 mm/sec] 36 in [914 mm] Integrated Motor Rod-Style ctuator 3,3 lbf [14,679 N] 23 in/sec [584 mm/sec] 18 in [457 mm] Screw/Nut Type Solid all Solid, all & Roller Solid & all all & Roller For complete information see www.tolomatic.com or literature number: Literature Number: 219-4 21-4 36-469 36-469 27-4 (Not all models deliver maximum values listed, i.e.: Maximum thrust may not be available with maximum speed) 2 1-8-328-2174 www.tolomatic.com
ERD Electric Rod-Style ctuator pplications Press Fit, Pick & Place, ssembly ligning Gating, Sorting, Diverting ONTENTS mx What is the ERD......... 2 Rod-Style ctuators...... 2 pplications............ 3 RODLESS TUTORS ERD Features......... 4-5 PERFORMNE & Specifications ritical Speed........... 6 Life apacities.......... 7 ctuator............... 8 Product hange Over Heat Staking, Sonic Welding DIMENSIONS ROD STYLE TUTORS ERD ctuator........... 9 ERD Options.......... 1 IR Switches......... 11-12 IM ppl. Data Worksheet.... 13 Selection Guidelines..... 14 Ordering............ 15 Other pplications: ligning nimation ssembly utomatic tool changers utomotive onverting onveyors Diverting Fillers Formers Gating Heat staking Laser positioning Material handling systems Medical equipment Motion simulators Open / close doors Packaging equipment Parts clamping Patient lifts Pick & place Plate positioning change Press fit Product changeover Product test simulations Robot manipulator arms Sonic welding Sorting Table positioning Tension control Test stands Volumetric pumps Web guidance Wire winding 1-8-328-2174 www.tolomatic.com ONTROL SYSTEMS + GEROX SwItH 3
ERD Electric Rod-Style ctuator Endurance Technology features are designed for maximum durability to provide extended service life. mx RODLESS TUTORS SREW/nut TEHNOLOGy Solid nut of engineered resins offers quiet performance at low cost Patent Pending IR threaded Nose mount With Jam nut Metric threads onvenient mounting for many applications IM GEROX ROD STYLE TUTORS ONTROL SYSTEMS + Male threaded Rod End Standard metric threads ompatible with many commercially available metric rod end accessories Stainless Steel thrust tube Stainless steel thrust tube provides high rigidity and corrosion resistance Nose ERING Engineered resins for smooth operation Provides critical support of thrust rod SwItH 4 1-8-328-2174 www.tolomatic.com
MXIMUM DURILITY Stainless Steel Main tube Stainless steel main tube provides high rigidity and corrosion resistance Nema Motor Mount ERD6: NEM11 ERD1: NEM17 ERD15: NEM23 Limitations to motor shaft size apply (see page 9) Lead screw High performance steel, proven through years of use in Tolomatic actuators Three leads available in each size to maximize thrust or speed internal Magnet This standard feature accommodates reed and solid state switches anywhere on the main tube Options Oversized Main earing Oversized for long life ccommodates high thrust load trunnion mount* For applications that require pivoting *Install by Tolomatic Foot mount onvenient, flexible mounting option front Flange mount onvenient mounting option Switches hoose from: Reed, Solid State PNP or NPN, all available in normally open NOTE: ll* options are shipped together with the actuator but are not installed by Tolomatic. (*Trunnion Mount installed by Tolomatic) 1-8-328-2174 www.tolomatic.com 5
mx IR IM RODLESS TUTORS ROD STYLE TUTORS ERD Electric Rod-Style ctuator SIZE: LL SPEIFITIONS (US standard measurement) ERD SIZE ERD SIZE SREW DI. SREW DI. MXIMUM STROKE* MXIMUM STROKE* SREW ODE LED ccu- RY MXIMUM THRUST* INERTI WEIGHT LED ase Per Inch ase Per Inch mm mm mm/rev mm/ 3mm N kg-m 2 x 1-6 kg-m 2 x 1-6 kg kg SN2 12.7 6 6.35 23.2 SN4 6.35.13 89.53.3.119.16 SN16 1.6 SN1 25.4 1 9.53 254. SN2 12.7.18 188.64.18.186.31 SN5 5.8 SN1 25.4.15 15 12.7 34.8 SN2 12.7.13 334 3.4.5.489.57 SN5 5.8.15 Temperature range 4 to 13 F (4.4 to 54.4 ) IP rating SREW ODE 4 (static) LED LED ccu RY MXIMUM THRUST* *Longer stroke length modification available upon request, INERTI WEIGHT ase Per Inch ase Per Inch in in in/rev in/ft lbf lb-in 2 lb-in 2 lb lb SN2.5 6.25 8 SN4.25.5 2.18.1.263.35 SN16.63 SN1 1. 1.375 1 SN2.5.7 4.22.6.411.69 SN5.2 SN1 1..6 15.5 12 SN2.5.5 75.14.17 1.79.126 SN5.2.6 SPEIFITIONS (metric measurement) SPEIFITIONS GEROX SwItH ONTROL SYSTEMS + Side Load onsiderations The ERD rod-style actuator is not meant to be used in applications where side loading occurs. Loads must be guided and supported. Loads should be aligned with the line of motion of the thrust rod. Side loading will affect the life of the actuator. 6 1-8-328-2174 www.tolomatic.com
ERD Electric Rod-Style ctuator SIZE: LL ME SREW/NUT RITIL SPEED PITIES 4 1 1 SN5 SN5 12 STROKE (mm) 1 1 SN2 SN2 PERFORMNE 23 35 15 SN1 1,16 mx 1 1 SN1 SN1 3 6 SN16 6 SN4 15 SN5 6 SN2 15 SN2 762 RODLESS TUTORS SPEED (in/sec) 2 58 SPEED (mm/sec) ROD STYLE TUTORS IR IM 1 254 4 8 STROKE (in) 12 ONTROL SYSTEMS + GEROX SwItH 1-8-328-2174 www.tolomatic.com 7
mx ERD Electric Rod-Style ctuator SIZE: LL SREW UKLING LOD STROKE (mm) 76 152 229 35 8 356 15 LL PERFORMNE 6 267 RODLESS TUTORS THRUST (lbf) 4 2 6 SN2 6 SN4+16 1 LL 178 89 THRUST (N) IR IM GEROX ROD STYLE TUTORS ONTROL SYSTEMS + THRUST (lbf) 6 4 2 1 1 SN5 SN5 6 SN16 15 SN5 6 SN4 3 6 9 STROKE (in) PV LIMITS (Pressure Velocity of cme Nut) SPEED (mm/sec) 254 58 762 8 15 SN2 1 SN2 6 SN2 15 SN1 1 SN1 12 1,16 356 267 178 89 THRUST (N) SwItH 8 1 2 3 SPEED (in/sec) 1-8-328-2174 www.tolomatic.com 4
ERD Electric Rod-Style ctuator SIZE: LL TUTOR ERD15 (MOTOR SHFT INTERFE) R O Motor DIMENSIONS The ERD actuator is designed to accommodate NEM standard stepper and servo motors. MOTOR SHFT OLT HOLE MOTOR PILOT P S MX E Q N (SHS) PLR ERD6 ERD1 ERD15 in 1.125 1.58 2.22 mm 28.58 4.13 56.39 in Ø1.287 Ø1.725 Ø2.625 mm Ø32.69 Ø43.82 Ø66.68 in - - - mm - - M4 x.8 ctuator ERD6 ERD1 ERD15 F + STROKE M Size NEM11 NEM17 NEM23 G II DIMENSIONS H I J L K JM NUT ERD6 ERD1 3D D available at www.tolomatic.com The only limiting factors are the motor shaft diameter and length. NEM standard motors from the companies in the table at right have been found to be compatible with the ERD actuator. ( *NOT a complete listing) When any motor has been selected for use with the ERD actuator it is important to confirm the motor is compatible with the dimensions in the table below. ERD6 ERD1 ERD15 in.5.5.5 MIN. mm 12.7 12.7 12.7 in 1.1 1.1 1.25 MX. mm 27.94 27.94 31.75 DIMETER in.197.197.25 mm 5. 5. 6.35 IRLE in 1.287 1.725 2.625 mm 33.69 43.82 66.68 SPING D in.91 1.22 1.856 mm 23.11 3.99 47.14 DIMETER in.98.98 1.55 E MX. mm 24.9 24.9 39.37 LENGTH HEIGHT MX. F in.9.13.13 mm 2.29 3.3 3.3 D E F ERD6 ERD1 ERD15 in Ø.136 Ø.154 - mm Ø3.45 Ø3.91 - in 1.4.74.85 mm 35.56 18.8 21.59 in 3.88 4.2 5.4 mm 98.5 12.3 137.2 MOTOR PILOT HEIGHT MOTOR SHFT LENGTH 1-8-328-2174 www.tolomatic.com F DIMETER D ERD6 ERD1 ERD15 G in.5.5.6 mm 12.7 12.7 15.24 H in.153.153.153 mm 3.89 3.89 3.89 I in.375.5.75 mm 9.53 12.7 19.5 J in - - - mm M6 x 1. M8 x 1.25 M12 x 1.75 K in Ø.443 Ø.669 Ø1.41 mm Ø11.25 Ø17. Ø26.4 L in - - - mm M16 x 1.5 M24 x 1.5 M34 x 1.5 II in.236.236.315 mm 6. 6. 8. M in Ø.669 Ø1.4 Ø1.638 mm Ø17. Ø26.42 Ø41.61 N in.98.98.98 mm 2.5 2.5 2.5 O in.512.512.512 mm 13. 13. 13. P in.264.323.298 mm 6.71 8.2 7.57 Q in (2) M4 x (2) M6 x (2) M6 x.7.1 1..31 1..5 mm (2) M4 x (2) M6 x (2) M6 x.7 2.5 1. 7.9 1. 12.7 R in Ø.197 Ø.197 Ø.25 mm Ø5. Ø5. Ø6.35 S in 1.1 1.1 1.25 mm 27.94 27.94 31.75 OLT HOLES IRLE E MOTOR PILOT DIMETER D SPING ERD ompatible Motor Suppliers* naheim utomation nimatics pplied Motion Products utomation Direct ool Muscle Electrocraft Fastech IMS / Scheider Electric JVL LIN Engineering Nippon Pulse Motor Omega Oriental Motor Parker Sanyo Denki RODLESS TUTORS ROD STYLE TUTORS ONTROL SYSTEMS + mx IR IM GEROX SwItH 9
O P mx U OUNT OPTION T IR IM GEROX SwItH RODLESS TUTORS ROD STYLE TUTORS ONTROL SYSTEMS + N (SHS) PLR X T N (SHS) PLR ERD Electric Rod-Style ctuator-options SIZE: P LL V + STROKE Foot mount V + STROKE U W X trunnion mount TRUNNION OPTION front flange FRONT FLNGE MOUNT OPTION 1 Y HH W FRONT FLNGE MOUNT OPTION II JM NUT T U P X V + STROKE Y TRUNNION OPTION Z HH DD II JM NUT W DD EE DIMENSIONS Z 3D D available at www.tolomatic.com 1-8-328-2174 www.tolomatic.com GG EE FF GG FF ERD6 ERD1 ERD15 T in.259.38.46 mm 6.58 7.82 1.31 U in 1.75 2. 2.6 mm 44.45 5.8 66.4 V in 2.27 2.357 3.165 mm 57.66 59.87 8.39 W in.625 1. 1.25 mm 15.88 25.4 31.75 X in Ø.154 Ø.194 Ø.221 mm Ø3.91 Ø4.93 Ø5.61 Y in.25.25.43 mm 6.35 6.35 1.92 Z Ø.1878 / Ø.253 / Ø.3753 / in Ø.1876 Ø.251 Ø.3751 mm Ø4.77 / Ø6.358 / Ø9.533 / Ø4.765 Ø6.353 Ø9.528 in 1.221.35.425 mm 31.1 8.89 1.8 in 1.75 2.25 2.5 mm 44.45 57.15 63.5 in 1. 1.375 1.75 mm 25.4 34.93 44.45 DD in.5.875 1.25 mm 12.7 22.23 31.75 EE in 1.25 1.75 2. mm 31.75 44.45 5.8 FF in Ø.154 Ø.194 Ø.221 mm Ø3.91 Ø4.93 Ø5.61 GG in.79 1.12 1.575 mm 18. 28. 4. HH in.194.194.194 mm 4.93 4.93 4.93 II in.236.236.315 mm 6. 6. 8.
ERD Electric Rod-Style ctuator SIZE: LL RoHS OMPLINT REED SOLID STTE Order ode Part Number Lead Switching Logic R Y 219-982 5m SPST Normally R K 219-983 QD* Open T Y 219-988 5m T K 219-989 QD* K Y 219-99 5m K K 219-991 QD* PNP (Sourcing) Normally Open NPN (Sinking) Normally Open Power LED Signal LED Operating Voltage **Power Rating (Watts) Switching urrent (m max.) Switch installation - Field replacement instructions SWITHES ERD actuators offer a wide range of sensing choices. There are 6 switch choices: reed, solid state PNP (sourcing) or solid state NPN (sinking); normally open; with flying leads or quick-disconnect. ommonly used for end-of-stroke positioning, these switches allow clamp-on installation anywhere along the entire actuator length. The internal magnet, located on the thrust tube, is a standard feature. Switches can be installed in the field at any time. Switches are used to send digital signals to PL (programmable logic controller), TTL, MOS circuit or other controller device. Switches contain reverse polarity protection. Solid state QD cables are shielded; shield should be terminated at flying lead end. ll switches are E rated and are RoHS compliant. Switches feature bright red or green LED signal indicators. Red Green Red 5-24 /D 5-3 Vdc *QD = Quick-disconnect Enclosure classification IE 529 IP67 (NEM 6) LES: Robotic grade, oil resistant polyurethane jacket, PV insulation urrent onsumption **1. 1m **3. 2m Voltage Drop **WRNING: Do not exceed power rating (Watt = Voltage x mperage). Permanent damage to sensor will occur. 8 m @ 24V 3. V max. 1. V max. Leakage urrent.1 m max. Temp. Range 14 to 158 F [-1 to 7 ] Shock / Vibration 3 G / 9 G 5 G / 9 G RODLESS TUTORS ROD STYLE TUTORS mx IR IM Step 1: Loosen screw and nut. Step 2: Place sensor and wrap the band around the ERD cylinder. Position the hook with the nearest hole on the band and mark the hole with a permanent marker. Step 3: Remove mounting assembly. ut the band at the nearest edge of the next hole. (The one that's furthest away from the mounting head.) Step 4: Replace the sensor and mounting assembly. Wrap the band and put the chosen hole on the hook. Position the switch and tighten. Tighten nut for steadying. 1-8-328-2174 www.tolomatic.com ONTROL SYSTEMS + GEROX SwItH 11
ERD Electric Rod-Style ctuator SIZE: LL Wiring diagrams SWITHES mx RODLESS TUTORS REED NORMLLY OPEN #219-982 & #219-983 NORMLLY OPEN or NORMLLY OPEN RN LU RN LU LOD LOD QUIK DISONNET MLE PLUG PINOUT LK (SIGNL) LUE (-) ROWN (+) + - + - SOLID STTE NORMLLY OPEN PNP #219-988 & #219-989 NORMLLY OPEN PNP (SOURING) RN LK LU + SIGNL LOD #81-98 QUIK DISONNET FEMLE SOKET PINOUT LK (SIGNL) ROWN (+) LUE (-) - SOLID STTE NORMLLY OPEN NPN #219-99 & #219-991 NORMLLY OPEN NPN (SINKING) RN LK LU + LOD SIGNL - IR IM ROD STYLE TUTORS Switch DIMENSIONS.291 [7.4] _ Y - direct connect.276 [7.].138 [3.5].354 [9.].945 [24.] DETETION POINT, SOLID STTE DETETION POINT, REED _ K - QD (Quick-disconnect) switch 197 [5] 6 [15] GEROX ONTROL SYSTEMS + M8x1 Ø.35 [9] 81-98 - QD able 1.26 [32.1] Ø.28 [7].95 [24.1] 197 [5] SWITH LMP 219-179.57 [14.5].53 [13.4].46 [11.8] SwItH 12 1-8-328-2174 www.tolomatic.com
ERD Electric Rod-Style ctuator application Data Worksheet Orientation SIZE: LL Horizontal Vertical Fill in known data. Not all information is required for all applications Incline a SPEIFITIONS Load supported by actuator OR Move Profile Extend Move Distance inch millimeters (US Standard) (Metric) Move Time sec Max. Speed in/sec mm/sec Dwell Time fter Move sec Retract Move Distance inch millimeters Move Time sec Max. Speed in/sec mm/sec Dwell Time fter Move sec No. of ycles per minute per hour Hold Position? Required Not Required fter Move During Power Loss NOTE: If load or force changes during cycle use the highest numbers for calculations Extend Load lb. kg. (U.S. Standard) (Metric) Force lb. kg. (U.S. Standard) (Metric) Retract Load lb. kg. (U.S. Standard) (Metric) Force lb. kg. (U.S. Standard) (Metric) Load supported by other mechanism Stroke Length inch millimeters (US Standard) Motion profile + Speed ( ) - ontact Information Name, Phone, Email o. Name, Etc. (Metric) Precision Repeatability inch millimeters Operating environment Temperature, ontamination, Water, etc. FREE - Windows compatible software, download at www.tolomatic.com Or all 1-8-328-2174 for Excellent ustomer Service & Technical Support Time or Distance ( ) Graph your most demanding cycle, including accel/decel, velocity and dwell times. You may also want to indicate load variations and I/O changes during the cycle. Label axes with proper scale and units. USE the tolomatic sizing and selection software available on-line at www.tolomatic.com or... all tolomatic at 1-8-328-2174. We will provide any assistance needed to determine the proper actuator for the job. Fax 1-763-478-88 email help@tolomatic.com 1-8-328-2174 www.tolomatic.com RODLESS TUTORS ROD STYLE TUTORS ONTROL SYSTEMS + mx IR IM GEROX SwItH 13
mx IR IM GEROX RODLESS TUTORS ROD STYLE TUTORS ONTROL SYSTEMS + ERD Electric Rod-Style ctuator Selection Guidelines 1Establish Motion Profile Using the application stroke length, desired cycle time, loads and forces, establish the motion profile details including linear velocity and thrust in each of its segments. 2Select ctuator size and screw type ased on the required velocities and thrust select a size and screw type and lead of the ERD actuator. 3VERIFY RITIL SPEED OF THE SREW Verify that the application s peak linear velocity does not exceed the critical speed value for the size and lead of the screw selected. SPEED (in/sec) 4 3 2 1 6 SN16 6 SN4 1 1 SN5 SN5 12 STROKE (mm) 15 SN5 6 SN2 1 1 SN2 SN2 4 8 STROKE (in) 23 35 15 SN1 1,16 1 1 SN1 SN1 15 SN2 762 58 254 12 SPEED (mm/sec) sizing software available at www. tolomatic.com 4VERIFY XIL UKLING STRENGTH OF THE SREW Verify that the peak thrust does not exceed the critical buckling force for the size of the screw selected. THRUST (lbf) STROKE (mm) 76 152 229 35 8 356 6 4 2 6 SN2 6 SN4+16 1 LL 3 6 9 STROKE (in) 15 LL 267 178 89 12 THRUST (N) 5 Verify PV Value Verify that the PV value does not exceed the PV value for the size of the screw selected. THRUST (lbf) 8 6 4 2 SPEED (mm/sec) 254 58 762 1 1 SN5 SN5 6 SN16 15 SN5 6 SN4 15 SN2 1 SN2 6 SN2 15 SN1 1 SN1 1 2 3 SPEED (in/sec) 1,16 356 267 178 89 4 THRUST (N) 6ESTLISH TOTL TORQUE REQUIREMENTS alculate total system inertia. The peak and RMS torque required from the motor to overcome internal friction, external forces and accelerate/decelerate the load. 7Select mounting and sensor choices Mounting options include: TRN trunnion mount, FFG front flange mount, FM2 foot mount. 6 sensor choices include: reed, solid state PNP or NPN, all in normally open, with flying leads or quick-disconnect couplers. SwItH 14 1-8-328-2174 www.tolomatic.com
ERD Electric Rod-Style ctuator ORDERING E R D 1 S N 2 S M 1 5 2. 4 L M I F F G K K 2 ERD Model Rod-Style ctuator Size 6 1 15 Nut/screw combinations Turns/in Size ode (TPI) 6 SN 2, 4, 16 1 SN 1, 2, 5 15 SN 1, 2, 5 Not all codes listed are compatible with all options. ontact Tolomatic with any questions. Stroke Length SM._ Enter desired stroke length in millimeters (25.4mm = 1 inch) Maximum Stroke ERD Size mm in 6 23.2 8 1 254. 1 15 34.8 12 ontact Tolomatic with requests for longer strokes Motor Mounting LMI In-line motor mount Service Parts Ordering ERD ctuator MOUNTING Replacement Kits ctuator Mounting For all motor mounts: FFG Front Flange Mount TRR* Trunnion Mounting, Rear FM2 Foot Mount Type LOGI Reed SPST ERD SIZE Description 6 1 15 For all motor mounts FFG Front Flange Mount Kit 219-125 2191-125 2192-125 FM2 Foot Mount Kit 219-91 2191-91 2192-91 TRR Trunnion Mount Kit 182-13 (order 2) 61-144 (order 2) 6-1785 (order 2) ode erd Switches To order switch kits use configuration code for switch preceded by SW and actuator code. EXMPLE: SWERD15KK3 KIT TUTOR SIZE SWITH ODE QUNTITY The example is for 3 Solid State NPN, Normally Open Switches with Quick-disconnect couplers. Each switch is complete with racket, Set Screw, Switch and mating QD cable. To order switch ONLY see part number in table *Installed by Tolomatic Switches 1-8-328-2174 www.tolomatic.com Solid State NORMLLY Open PNP Open NPN Open Quick- Disconnect ode No Yes No Yes No Yes RY RK TY TK KY KK QUNTITY fter code enter quantity desired Lead Length 5 m (16.4 feet) 6 in (152mm) to QD connector w/ 5m lead NOTE: ll* options are shipped together with the actuator but are not installed by Tolomatic. (*Trunnion Mount installed by Tolomatic) ode **Switch ONLY Part No. Lead Normally Sensor Type R Y 219-982 5m (197 in) R K 219-983* Quick-disconnect Open Reed T Y 219-988 5m (197 in) T K 219-989* Quick-disconnect Open Solid State PNP K Y 219-99 5m (197 in) K K 219-991* Quick-disconnect Open Solid State NPN **lso order clamp assembly #219-179 *lso order mating QD cable #81-98 RODLESS TUTORS ROD STYLE TUTORS ONTROL SYSTEMS + mx IR IM GEROX SwItH 15
The Tolomatic difference What you expect from the industry leader: Excellent customer service & Technical Support Our people make the difference! Expect prompt, courteous replies to all of your application and product questions. industry leading deliveries Standard catalog products are built to order and ready-to-ship in 5 days or less. Modified and custom products ship weeks ahead of the competition. innovative products From standard catalog products... to modified products... to completely unique custom products, Tolomatic designs and builds the best solutions for your challenging applications. Sizing & Selection software Windows compatible, downloadable from our website FREE the best tool of its kind on the market! Product selection has never been easier. 3D MODELS & 2D DRWINGS VILLE ON THE WE Easy to access D files are available in many popular formats. lso consider these other Tolomatic Products: Pneumatic Products RODLESS YLINDERS: and ylinders, able ylinders, Magnetically oupled ylinders/slides; Guided Rod ylinder Slides Foldout rochure #99-975 Products rochure #99-428 www.tolomatic.com/pneumatic Electric Products Rod & Guided Rod Style ctuators, High Thrust ctuators, Screw & elt Drive Rodless ctuators, Motors, Drives and ontrollers Foldout rochure #99-974 products rochure #99-416 www.tolomatic.com/electric POWER TRNSMISSION Products GEROXES: Float--Shaft, Slide-Rite ; Disc one lutch; aliper Disc rakes Foldout rochure #99-976 Products rochure #99-429 www.tolomatic.com/pt 38 ounty Road 116 Hamel, MN 5534 U.S.. Phone: (763) 478-8 Fax: (763) 478-88 Toll-Free: 1-8-328-2174 Email: help@tolomatic.com http://www.tolomatic.com ll brand and product names are trademarks or registered trademarks of their respective owners. Information in this document is believed accurate at time of printing. However, Tolomatic assumes no responsibility for its use or for any errors that may appear in this document. Tolomatic reserves the right to change the design or operation of the equipment described herein and any associated motion products without notice. Information in this document is subject to change without notice. Visit www.tolomatic.com for the most up-to-date technical information 8 21 Tolomatic 2161125 DP 8 61747 Literature Number: 219-4_