RSA/RSM & GSA / GSM ELECTRIC ROD-STYLE ACTUATORS LINEAR SOLUTIONS MADE EASY

Transcription

1 /RSM & GS / GSM ELECTRIC ROD-STYLE CTUTORS LINER SOLUTIONS MDE ESY

2 & GS Electric Rod-Style ctuators WHT RE THE & THE GS? The is a flexible electric screw driven rod-style actuator. The standard (ST) model comes in six sizes. The guided (GS) adds guidance and load support to the design and is available in the 4 smaller sizes. The high force (HT) model is available in the 4 larger sizes, it incorporates stronger torque transmission components (couplers, pulleys, belts) and higher thrust bearings. 15 DYS UILT-TO-ORDER ST GS HT TOLOMTIC S ELECTRIC ROD-STYLE CTUTORS ERD RSX GS IM Thrust up to: Speed up to: Stroke Length up to: Rod-Style ctuator Rod-Style ctuator Rod-Style ctuator Guided Rod-Style ctuator 35 kn (7,868 lbf) 1473 mm/sec (58 in/sec) 1219 mm (48 in) 58 kn (13,39 lbf) 3,1 mm/sec (123 in/sec) 1,5 mm (6 in) kn (3, lbf) 76 mm/sec (29.9 in/sec) 15 mm (59 in) 4.23 kn (95 lbf) 3,1 mm/sec (123 in/sec) 914 mm (36 in) Integrated Motor Rod-Style ctuator 3.6 kn (6,875 lbf) 1,334 mm/sec (52.5 in/sec) 457 mm (18 in) Screw/Nut Type Solid, all & Roller Solid, all & Roller Roller Solid & all all & Roller For complete information see or literature number: Literature Number: (Not all models deliver maximum values listed, i.e.: Maximum thrust may not be available with maximum speed) R/GS_

3 & GS Electric Rod-Style ctuators pplications Pressing Punching Piercing Injection Molding CONTENTS What are & GS...R/GS_2 Rod-Style ctuators....r/gs_2 ST pplications....r/gs_3 ST Features...R/GS_4 HT Features...R/GS_6 Options...R/GS_6 GS Features...R/GS_8 ST...R/GS_1 Specifications...R/GS_1 Storage & Retrieval Performance...R/GS_12 Specifications...R/GS_18 Dimensions...R/GS_18 Option Dimensions....R/GS_2 ctive Security arrier HT...R/GS_26 Specifications...R/GS_26 Performance...R/GS_28 Specifications...R/GS_ Dimensions...R/GS_34 Option Dimensions....R/GS_36 GS...R/GS_42 Specifications...R/GS_42 Performance...R/GS_46 Specifications...R/GS_42 Other pplications: nimation ssembly machinery utomatic tool changers utomotive Clamping Converting Conveyors Cycle testing Fillers Formers Hydraulic replacement Laser positioning Machine tools Material handling Medical equipment Molding Motion simulators Open / close doors Packaging equipment Parts clamping Patient lifts Pick & place Pneumatic replacement Precision grinders Product test simulations Riveting / fastening / joining Robot manipulator arms Sawmill equipment Semiconductor Stage motion control Stamping Table positioning Tension control Test stands Tube bending Volumetric pumps Water jet control Wave generation Web guidance Welding Wire winding and many more Guide Rod Deflection...r/gsa_5 Dimensions...R/GS_55 Option Dimensions...R/GS_56 SWITCHES...R/GS_57 ppl. Data Worksheet...R/GS_59 Selection Guidelines...R/GS_6 Service Parts Ordering..R/GS_61 ORDERING...R/GS_62 GS ORDERING...R/GS_63 Tolomatic Difference.... R/GS_ R/GS_3

4 ST -ST ROD-STYLE CTUTOR Endurance Technology features are designed for maximum durability to provide extended service life. The rod screw actuator is ideal for medium to high thrust applications of guided loads. The compact design and cylinder style operation make this solution ideal for applications that were historically solved with pneumatic or hydraulic power. Many mounting options are available allowing the actuator to be installed in numerous applications. uilt-to-order in stroke lengths up to 6 inches with your choice of screw technology. HIGH POSITIONL CCURCY CCURCY Roller Nut ±.4"/ft. ±.12mm/3mm Metric all Nut ±.2"/ft. ±.51mm/3mm MULTIPLE TECHNOLOGIES YOU CN CHOOSE: Solid nuts of bronze or engineered resins offer quiet performance at the lowest cost; anti-backlash available all nuts offer efficiency at a cost effective price; lowbacklash available THRUST TUE Steel thrust tube supports extremely high force capabilities Salt bath nitride treatment provides excellent corrosion resistance, surface hardness and is very resistant to adherence of potential contaminants SUPPORT ERING Engineered resin bearing provides continuous support of screw INTERNL UMPERS umpers protect the screw and nut assembly from damage at both ends of stroke THREDED ROD END Provides a common interface to multiple rod end options ROD WIPER Prevents contam inants from entering the housing for extended life of the actuator NOSE ERING Support the thrust tube and nut assembly through entire stroke length Unique nose bearing material allows for smooth operation and support of the thrust rod R/GS_

5 YOUR MOTOR HERE YOU CN CHOOSE: Specify the device to be installed and actuator ships with proper mounting hardware Specify and ship your device to Tolomatic for factory installation Motor or gearbox supplied and installed by Tolomatic MXIMUM DURILITY MOTOR ORIENTTION YOU CN CHOOSE: Inline option directly couples the driving shaft and is typically a onepiece housing construction for optimum alignment and support of the motor Reverse-parallel option minimizes the overall length and offers a belt reduction drive with a 1:1 or 2:1 ratio ST HIGH THRUST ERING Unique high thrust bearing assembly design eliminates runout and isolates the linear forces for the drive shaft INTERNL NUT ERINGS Engineered resin guide bearings provide anti-rotation of the thrust rod Support the thrust tube and nut assembly through entire stroke length LIGHTWEIGHT LUMINUM DESIGN lack anodized extrusion design is optimized for rigidity and strength External switch channels on all sides allow easy placement of position indicating switches RETHER/PURGE PORTS Standard feature on,5, size actuators s seen in this view, located on both the bottom and the opposite side of the actuator Use as reather Port: allows air flow into the interior of the actuator. Prevents additional load on the motor caused by air buildup due to fast cycling of the. Use as Purge Port: positive pressure with air lines and filters insure contaminants (which could potentially shorten the actuator life) do not enter the interior of the actuator. OPTIONS See page 7 for a complete list of options including the HT-high torque option R/GS_5

6 -HT OPTION The HT option is a higher thrust option for the,, 5 and sizes of the family. actuators with roller nuts are always HT option actuators. Use Tolomatic's online sizing software to determine if the HT Option is right for your application STNDRD FETURES See page 4 for a complete list of standard features WHY CHOOSE THE HT OPTION? Higher strength components transfer torque from the gearhead/motor through the actuator Grease zerk allows convenient relubrication for extended screw service life llows convenient addition of gearbox to RP (Reverse Parallel mount) actuator ccommodates mounting large motors with up to 165mm bolt circle pattern HT REDESIGNED LMI & RP HOUSING Specially designed to accommodate larger motors & gearboxes with higher torques and larger bolt circles (up to 6.5", 165mm) DURLE ELT MTERIL High torque polyurethane timing belt with carbon tensile cords resists stretching YOUR MOTOR HERE (Standard Feature) YOU CN CHOOSE: Specify the device* to be installed and actuator ships with proper mounting hardware (*keyed shaft required) Specify and ship your device* to Tolomatic for factory installation Motor or gearbox supplied and installed by Tolomatic IP67 OPTION Resist water ingress 1m deep for up to 3 min ENHNCED HIGH THRUST ERING HT actuators come with high thrust angular contact ball bearing in matched pair assembly design eliminates runout and isolates the linear forces for the drive shaft MULTIPLE TECHNOLOGIES YOU CN CHOOSE: ronze solid nuts offer quiet performance at the lowest cost; anti-backlash available all nuts offer efficiency at a cost effective price; low-backlash available Roller nuts provide the highest thrust and life ratings available (HT option) HEVY DUTY INTERNL UMPERS umpers protect the screw and nut assembly from damage at both ends of stroke R/GS_

7 MXIMUM DURILITY OPTIONS (vailable for all actuators unless noted) METRIC OPTION Provides metric tapped holes for mounting of load to rod end and of actuator to mating surfaces SWITCHES Choose from: Reed, Solid State PNP or NPN, all available normally open or normally closed IP67 Static: special gaskets for basic protection against water and dust ingress,5, sizes only: HT actuator (LMI and RP); ST actuator (RP motor mount only) ROD END MET: External Threads male threads CLV: Clevis Rod End for pivoting mount SRE: Spherical Rod End for pivoting mount MOUNTING MP2: Mounting Plates for surface mounting FFG: Front Flange for mounting near rod end TRR: Trunnion Mount for pivoting mount HT LC: lignment Coupler Rod End to compensate for mounting alignment XR: Rod Extension to separate load from the actuator elow are for RP Motor mounting only FM2: Foot Mount for surface or end mounting FG: Rear Flange for mounting opposite the rod end PCD: Clevis PCS: Eye Mount for pivoting mount THREDED ROD END Provides a common interface to multiple rod end options GRESE ZERK This relubrication system provides extended screw service life Convenient lubrication without disassembly Standard with all HT option actuators R/GS_7

8 GS GUIDED ROD-STYLE CTUTOR The GS guided screw actuator is ideal for medium to high thrust applications. The selfcontained guided rod design and cylinder slide style operation make this solution ideal for applications requiring guidance and support of the load. robust, wide tooling plate allows easy mounting of the required end effectors for many applications. uilt-to-order in stroke lengths up to 36 inches with your choice of screw technology. Endurance Technology features are designed for maximum durability to provide extended service life. MULTIPLE TECHNOLOGIES YOU CN CHOOSE: Solid nuts of bronze or engineered resins offer quiet performance at the lowest cost; anti-backlash available all nuts offer efficiency at a cost effective price; low-backlash available Roller nuts provide the highest thrust and life ratings available LIGHTWEIGHT LUMINUM DESIGN lack anodized bearing block provides solid structural support and multiple mounting options lack anodized tube extrusion design is optimized for rigidity and strength External switch channels on all sides allow easy placement of position indicating switches ROD WIPER Prevents contaminants from entering the housing for extended life of the actuator GS NODIZED LUMINUM THRUST TUE Lightweight design directly provides thrust with minimal additional inertia Corrosion resistant plating provides excellent protection from many chemicals INTEGRL GUIDE RODS ND ERINGS Hardened steel guide rods provide high rigidity and low deflection Four composite or linear ball bearings support the load for smooth, consistent motion Lubrication wick supplies lube for life of actuator Oversized rods available for higher load capacity Stainless steel shafting option available for corrosion resistance R/GS_

9 MXIMUM DURILITY YOUR MOTOR HERE YOU CN CHOOSE: Specify the device to be installed and actuator ships with proper mounting hardware Specify and ship your device to Tolomatic for factory installation Motor or gearbox supplied and installed by Tolomatic MOTOR ORIENTTION YOU CN CHOOSE: Inline option directly couples the driving shafts and is typically a one-piece housing construction for optimum alignment and support of the motor Reverse-parallel option minimizes the overall length and offers a 1:1 or 2:1 belt ratio SUPPORT ERINGS Unique high thrust bearing assembly design eliminates runout and isolates the linear forces for the drive shaft Engineered resin bearing provides continuous support of screw PRECISION MCHINED SURFCES Extruded bearing housing is precision machined on two surfaces for true and easily aligned linear motion Tooling plate is aligned and assembled to provide a precise mounting surface OPTIONS OVERSIZED GUIDE RODS vailable for increased load capacity or decreased deflection STOP COLLRS Provide a positive stop mechanism when required CORROSION RESISTNCE Includes 316 stainless steel guide rods and fasteners for better environmental protection METRIC OPTION Provides metric tapped holes for mounting of load to tooling plate and of actuator to mating surfaces SWITCHES Choose from: Reed, Solid State PNP or NPN, all available normally open or normally closed GS R/GS_9

10 ST Electric Rod-Style ctuator SIZE: LL units: US standard sizeit.tolomatic.com for fast, accurate actuator selection SPECIFICTIONS CTUTOR SIZING ST SIZE SE CTUTOR INERTI INERTI DYNMIC DYNMIC PER/in TORQUE TO CK-_ LOD Reverse Parallel OF OVERCOME CODE TPI LSH RTING** In Line 1:1 2:1 STROKE FRICTION in turns/in in/ft in lbf lbf lb-in 2 lb-in 2 lb-in 2 lb-in 2 lb-in 12 SN N.4.5 N SN N.2.3 N SN N.2.2 N Z N.2.2 N N(L) N.1.5 MX. STROKE LED CCUR- CY MX. THRUST* 18 SN N.6.7 N SN N.3.3 N SN N.2.2 N Z N.2.2 N N(L) N.1 1. SN N SN N SN N Z N N(L) , N(L) , SN N SN N Z N N(L) , N(L) , NM , SN N Z ,784 N N(L) , N(L) ,517 5, N(L) ,34 5, NM ,347 4, NM ,926 3, NM , SN N Z ,781 N N(L) , N(L) ,19 11, N(L) ,28 6, NM ,33 6, NM ,33 7, NM ,282 5, CODE N NH NL NM Z RN SN DESCRIPTION all Nut all Nut H-series Low-acklash all Nut all Nut Metric ronze Nut Roller Nut Solid Nut Contact Tolomatic for higher accuracy and lower backlash options. (L) for low backlash ball screws: backlash =.2 (.5 mm) * For SN & Z screws, maximum continuous dynamic thrust subject to Thrust x Velocity limitation. ** For RN, N & NL screws, dynamic load rating reflects 9% reliability for 1 million revolutions. R/GS_

11 RSM ST Electric Rod-Style ctuator SIZE: LL units: metric ** SPECIFICTIONS ** RSM metric actuators use the same leadscrew as the inch actuators. Threaded mounting and dowel pin holes are metric. RSM SIZE SE CTUTOR INERTI INERTI DYNMIC DYNMIC PER/ TORQUE TO CK-_ LOD Reverse Parallel 25mm OF OVERCOME CODE LED LSH RTING** In Line 1:1 2:1 STROKE FRICTION mm mm/rev mm/3mm mm N N kg-m 2 x 1-6 kg-m 2 x 1-6 kg-m 2 x 1-6 kg-m 2 x 1-6 N-m 35 SN N N SN N N SN N N Z N N N(L) , N MX. STROKE LED CCUR- CY MX. THRUST* 457 SN N N SN N N SN N N Z N N N(L) , N SN N SN N SN N Z ,781 N N(L) ,67 6, N(L) ,781 4, SN N SN ,334 N Z ,492 N N(L) ,375 14, N(L) ,226 7, NM ,58 11, SN ,779 N Z ,936 N N(L) ,372 1, N(L) ,748 23, N(L) ,496 22, NM ,44 17, NM ,567 14, NM ,43 11, SN ,2 N Z ,922 N N(L) ,393 26, N(L) ,981 5, N(L) ,917 3, NM ,43 29, NM ,43 33, NM ,73, ST CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric Z ronze Nut RN Roller Nut SN Solid Nut Contact Tolomatic for higher accuracy and lower backlash options. (L) for low backlash ball screws: backlash =.2 (.5 mm) * For SN & Z screws, maximum continuous dynamic thrust subject to Thrust x Velocity limitation. ** For RN, N & NL screws, dynamic load rating reflects 9% reliability for 1 million revolutions. R/GS_11

12 ST ST Electric Rod-Style ctuator SIZE: 12,16: CRITICL SPEED CPCITIES STROKE (mm) SPEED (in/sec) sizeit.tolomatic.com for fast, accurate actuator selection SN1 SN2 SN5 N8 Z PERFORMNCE STROKE (in) 16 CTUTOR SIZING SPEED (mm/sec) SIZE: : CRITICL SPEED CPCITIES STROKE (mm) N2 SPEED (in/sec) SN2 SN4 N5 SN8 Z1 1 5 SPEED (mm/sec) STROKE (in) CODE DESCRIPTION CODE N all Nut Z NH all Nut H-series RN NL Low-acklash all Nut SN NM all Nut Metric DESCRIPTION ronze Nut Roller Nut Solid Nut R/GS_

13 ST Electric Rod-Style ctuator SIZE: : CRITICL SPEED CPCITIES STROKE (mm) SN1 5 NM2 PERFORMNCE 15 ST SPEED (in/sec) N2 SN2 N5 1 5 SPEED (mm/sec) Z STROKE (in) 36 SIZE: 5: CRITICL SPEED CPCITIES STROKE (mm) N1 SPEED (in/sec) SN4 N2 NM1 N4 NM5 Z1 1 STROKE (in) NM25 Max. Stroke CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric SPEED (mm/sec) CODE DESCRIPTION Z ronze Nut RN Roller Nut SN Solid Nut R/GS_13

14 ST ST Electric Rod-Style ctuator SIZE: : CRITICL SPEED CPCITIES SPEED (in/sec) N53 SN4 N2 STROKE (mm) NM2 NH2 NM1 STROKE (in) sizeit.tolomatic.com for fast, accurate actuator selection N4 Z NM5 PERFORMNCE SPEED (mm/sec) CTUTOR SIZING SIZE: 12,16: PV LIMITS (Solid Nuts) 7 SPEED (mm/sec) 635 1,27 1,95 2,54 3, THRUST (lbf) THRUST (N) 1 44 PV LIMITS Z1 SN SPEED (in/sec) PV LIMITS: ny material which carries a sliding load is limited by heat buildup. The factors that affect heat generation rate in an application are the pressure on the nut in pounds per square inch and the surface velocity in feet per minute. The product of these factors provides a measure of the severity of an application. SN2 P x V.1 ( Thrust x SN1 CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric Speed ((Max. Thrust Rating)) ((Max. Speed Rating)) CODE DESCRIPTION Z ronze Nut RN Roller Nut SN Solid Nut.1 R/GS_

15 ST Electric Rod-Style ctuator SIZE:,,5, (SN): PV LIMITS (Solid Nuts) THRUST (lbf) SPEED (mm/sec) ,16 1,27 5 2, PERFORMNCE 1,779 1, THRUST (N) ST SN8 SN4 SN4 SN2 SN2 SPEED (in/sec) 5 SN4 SN1 SIZE:,,5, (Z): PV LIMITS (ronze Nuts) SPEED (mm/sec) , 8,896 5 Z1 Z1 THRUST (lbf) 1, Z1 Z1 4,448 THRUST (N) PV LIMITS SPEED (in/sec) PV LIMITS: ny material which carries a sliding load is limited by heat buildup. The factors that affect heat generation rate in an application are the pressure on the nut in pounds per square inch and the surface velocity in feet per minute. The product of these factors provides a measure of the severity of an application. P x V.1 ( Thrust x CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric Speed ((Max. Thrust Rating)) ((Max. Speed Rating)) CODE DESCRIPTION Z ronze Nut RN Roller Nut SN Solid Nut.1 R/GS_15

16 ST ST Electric Rod-Style ctuator LL LIFE GRPHS SIZE: 12, 16,, 3,5 3, N2 4,, 6,, 8,, 1,, 2,, 4,, **LIFE 6,, 8,, 1,,, (mm) 2,,, 4,,, 6,,, 8,,, 1,,, sizeit.tolomatic.com for fast, accurate actuator selection PERFORMNCE 2,,, 15, CTUTOR SIZING 2,5 THRUST (lbf) 2, 1,5 NM2 1, THRUST (N) 1, N5 5, 5 N2,N5 16 N5 1,, 12,16 N8 2,, 4,, 6,, 8,, 1,, 2,, 4,, **LIFE (in) 6,, 8,, 1,, 2,, 4,, 6,, 8,, 1,,, SIZE: 5, 4,, 6,, 8,, 1,, 2,, 4,, **LIFE 6,, 8,, 1,,, (mm) 2,,, 4,,, 6,,, 8,,, 1,,, 2,,, 12, 1, NH2 5, THRUST (lbf) 8, 6, 4, 2, N2 NM1 N4 NM5 5 N4 5 N1 5 N2 5 NM25 5 NM1 5 NM5 N53 NM2 4, 3, 2, 1, THRUST (N) 1,, NOTE: The L 1 expected life of a ball screw linear actuator is expressed as the linear travel distance that 9% of properly maintained ball screw manufactured are expected to meet or exceed. This is not a guarantee and this graph should be used for estimation purposes only. 2,, 4,, 6,, 8,, 1,, The underlying formula that defines this value is: L 1 = ( C ) 3 l P e 2,, 4,, **LIFE (in) L 1 Travel life in millions of units (in or mm), where: C = Dynamic load rating (lbf) or (N) P e = Equivalent load (lbf) or (N) If load is constant across all movements then: actual load = equivalent load l = Screw lead (in/rev) (mm/rev) 6,, 8,, 1,, 2,, 4,, 6,, 8,, 1,,, CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric Z ronze Nut RN Roller Nut SN Solid Nut Use the "Equivalent Load" calculation below, when the load is not constant throughout the entire stroke. In cases where there is only minor variation in loading, use greatest load for life calculations. P e = Where: 3 L 1(P 1 ) 3 +L 2 (P 2 ) 3 +L 3 (P 3 ) 3 +L n (P n ) 3 L P e = Equivalent load (lbf) or (N) P n = Each increment at different load (lbf) or (N) L = Total distanced traveled per cycle (extend + retract stroke) [L = L 1 + L 2 + L 3 + L n ] L n = Each increment of stroke at different load (in) or (mm) R/GS_

17 ST Electric Rod-Style ctuator UCKLING LOD SIZE: 12, 16,, THRUST (lbf) 16 N5 Z1 N5 N2 Z1 N2 NM2 PERFORMNCE , 4,448 N5 5 STROKE (mm) 2,2 THRUST (N) ST 12,16 N STROKE (in) 4 SIZE: 5 THRUST (lbf) 3, 2, 1, STROKE (mm) N4 5 NM25 5 NM5 5 N2 5 N1 5 NM1 5 Z1 15, 1, 5, THRUST (N) STROKE (in) SIZE: STROKE (mm) , N4 2, 15, THRUST (lbf) 2, NM1 Z1 NM2 N2 NM5 1, 5, THRUST (N)! 1 N STROKE (in) NOTE: uckling load limits shown assume perfect alignment. It is recommended to use additional safety margin, particularly in high thrust applications CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric Z ronze Nut RN Roller Nut SN Solid Nut R/GS_17

18 ST Electric Rod-Style ctuator SIZE: SPECIFICTIONS LL SE MODEL IN-LINE lb REVERSE PRLLEL lb PER in OF STROKE lb/in MOVING PRTS WEIGHT WEIGHT (M) SIZE SE WT. Z & SN lb SE WT. N lb PER in OF STROKE lb/in MX. STROKE in TEMP. RNGE* F Standard: 4 to 13 Extended:-4 to IN-LINE kg REVERSE PRLLEL kg PER mm OF STROKE g/mm SE WT. Z & SN kg SE WT. N kg PER mm OF STROKE g/mm MX. STROKE mm TEMP. RNGE* C Standard: 4 to 54 Extended:-4 to 6 Gasket Kit providing ingress protection against dust and splashing water available upon request MOVING PRTS WEIGHT WEIGHT SE MODEL (M) SIZE! CTUTOR SIZING Contact Tolomatic if operation in the extended range is required. Contact Tolomatic if operation in the extended range is required. * Heat generated by the motor and drive should be taken into consideration as well as linear velocity and work cycle time. For applications that require operation outside of the recommended temperature range, contact Tolomatic. LRGE FRME MOTORS ND SMLLER SIZE CTUTORS: Cantilevered motors need to be supported, if subjected to continuous rapid reversing duty and/or under dynamic conditions. SIDE LODING CONSIDERTIONS: Rod screw actuators are designed to push guided and supported loads and are not meant for applications that require substantial side loading. Please contact Tolomatic for details regarding side loading capabilities. Size ST CTUTOR DIMENSIONS C [4x] / / / Dimensions in inches Size ST sizeit.tolomatic.com for fast, accurate actuator selection C [4x] M3x M4x M5x.8 2. M6x M8x M12x Dimensions in millimeters R/GS_18 D 1/4-28 5/16-7/16-2 7/16-2 3/4-16 3/4-16 D M6x1. M8x1.25 M1x1.25 M16x1.5 M2x1.5 M27x NOTE: See the following page for dimensional drawing E [4x] / / / / F CME NUT G H LL NUT ROLLER NUT G H G H JØ K RR SS (2) /16-27 NPT /8-27 NPT /8-27 NPT E [4x] M4x M4x M6x M8x M1x M12x F CME NUT G H LL NUT ROLLER NUT G H G H JØ K RR SS (2) /16-27 NPT /8-27 NPT /8-27 NPT

19 ST Electric Rod-Style ctuator SIZE: LL ST CTUTOR DIMENSIONS 3D CD available at lways use configurated CD solid model to determine critical dimensions DIMENSIONS LMI Motor Mount DD J K F DD E Motor RP Motor Mount K D C L DD J F DD E ST H + H + KK STROKE SS NN TT Ø PP Stub Shaft JJ LL G + E KK STROKE EE TT SS JJ LL HH Motor C L SS CC TT G + STROKE STROKE E GG EE TT SS NOTE: HT (ll Configurations) and 5 HT (Roller Nut Configuration ONLY) have 6 mounting holes, all other configurations have 4 mounting holes. Motor Motor MM RR NOTE: YM code may change this dimension. lways use configured CD model to determine critical dimensions Size 12 Motor Frame CC CC LL OTHER NUTS ROLLER NUTS 1:1 2:1 DD EE MM NN PP GG HH JJ KK LL GG HH JJ KK LL in N Ø.188 mm N in N Ø.188 mm N in N Ø.188 mm N in Ø.315 mm in Ø.315 mm in Ø.394 mm in Ø.394 mm in Ø.5 mm in Ø.5 mm in Ø.5 mm in Ø.75 mm in Ø.75 mm R/GS_19

20 ST ST Rod End Options SIZE: LL SRE SPHERICL ROD END C D E 3D CD available at lways use configurated CD solid model to determine critical dimensions Size Ø C D E F G Ø H J 12 in / mm M6x in / mm M8x in / mm M1x in / mm M16x in / mm M2x in / mm M27x F G H J DIMENSIONS llows for slight misalignment between the load and the actuator (radial and angular). Uses an industry-standard bearing. CLV CLEVIS ROD END PIN Ø INCLUDED D C E F H G Used with the externally threaded rod end when the actuator has to compensate for misalignment or pivot about an axis. Size Ø C D E F G H in / mm 6.1 / 6.1 / M6x1. in /16-16 mm 8.1 / 6.1 / M8x1.25 in /16-2 mm M1x1.25 in /16-2 mm M16x1.5 5 in /4-16 mm M2x1.5 in /4-16 mm M27x2. KEY TO SYMOLS Indicates a note of high importance Indicates incompatibility with option(s) or size(s) Make note of this item R/GS_

21 ST Rod End Options SIZE: LL LC LIGNMENT COUPLER INTERNLLY THREDED END JM NUT JM NUT C D C 2 SPHERICL MOTION,.625 (1.6) RDIL FLOT EXTERNLLY THREDED END MET OPTION JM NUT Size C D E F 12 in.16 1/ mm 16 in.2 5/ mm in.25 7/ mm 6.4 M1x in.25 7/ mm 8. M16x in.45 3/ mm 1. M2x in.45 3/ mm 13.5 M27x D CD available at lways use configurated CD solid model to determine critical dimensions E F THE LIGNMENT COUPLER COMES WITH N INTERNL THRED. IF N EXTERNL THRED IS PREFERRED, THE DDITION OF THE MET OPTION IS REQUIRED. DIMENSIONS Used in combination with the externally threaded rod end to provide smooth motion and extends actuator life by preventing binding caused by angular or axial misalignment. Not available for use with clevis or trunnion mounts, as they must be rigidly mounted. If you need external thread, be sure to also order the MET external rod end ST MET EXTERNLLY THREDED ROD END C n alternative to the standard internally threaded end. D E Size C D E Ø 12 in.5 1/ mm 12.7 M6x in.5 5/ mm 12.7 M8x in.87 7/ mm 22.1 M1x in.87 7/ mm 28. M16x in 1.5 3/ mm 38.1 M-2x in 1.5 3/ mm 38.1 M27x R/GS_21

22 ST C ST Mounting Options SIZE: LL FFG FRONT FLNGE MOUNT Used when a bottom-tapped mount is not an option or where bottom support mechanisms are not feasible. Flange can be mounted directly to framework or a bulkhead C D J H E 3D CD available at lways use configurated CD solid model to determine critical dimensions DIMENSIONS Size Ø C D E F G Ø H J 12 in mm in mm in mm in mm in mm in mm J G E F MP2 MOUNTING PLTE D E Used for mountings other than flush. C C L Size C D E Ø 12 in FRME mm in FRME or YMH option mm in mm in mm in mm in mm in mm KEY TO SYMOLS Indicates a note of high importance Indicates incompatibility with option(s) or size(s) Make note of this item R/GS_

23 ST Mounting Options SIZE: LL TRR TRUNNION MOUNT Used where space is limited in the rear of the actuator and when pivoting about an axis is required. Not available with 12 or 16 size LMI (inline) motor mounting : US standard 3D CD available at lways use configurated CD solid model to determine critical dimensions US standard (Sizes:,, 5, ) RSM Metric (+12, 16) DIMENSIONS US standard RSM Metric F + STROKE E E F (LMI) F (RP) Size C Ø D Ø E CME NUT LL NUT ROLLER NUT CME NUT LL NUT ROLLER NUT 12 in / N N N N 16 in / N N N N in /.9993 N N in /.9993 N N in /.9993 N N N N in /.9993 N N N N C C D oth ST RSM: Metric F (LMI) F (RP) Size C Ø D Ø E CME NUT LL NUT ROLLER NUT CME NUT LL NUT ROLLER NUT 12 mm / N N N N 16 mm / N N N N mm / mm / mm / N N mm / N N FG CK FLNGE MOUNT C L G F C E Used when a bottom-tapped mount is not an option or where bottom support mechanisms are not feasible. Flange can be mounted directly to framework or a bulkhead Not available with LMI (inline) motor mounting D Size Ø C D E F G 12 in mm in mm in mm in mm in mm in mm R/GS_23

24 ST Mounting Options 3D CD available at SIZE: LL lways use configurated CD solid model to determine critical dimensions PCS EYE MOUNT & PCD CLEVIS MOUNT DIMENSIONS ST Used when the actuator has to compensate for misalignment or pivot about an axis when free movement is available in the back of the actuator. Not available with LMI (inline) motor mounting Used when the actuator has to compensate for misalignment or pivot about an axis when free movement is available in the back of the actuator. Not available with LMI (inline) motor mounting. FULL RDIUS FULL RDIUS C F E D D G E C Size C Ø D E F G 12 in / / /.448 mm / / / in / / /.448 mm / / / in / / /.751 mm / / / 26.1 in / / /.751 mm / / /.1 5 in / / / mm / / / 5.1 in / / / mm / / / 6.1 KEY TO SYMOLS Indicates a note of high importance Indicates incompatibility with option(s) or size(s) Make note of this item R/GS_

25 ST Mounting Options SIZE: LL FM2 FOOT MOUNTS Used when mounting holes on bottom of actuator are not accessible. Not available with LMI (inline) motor mounting Not available with HT option LC C D F E 3D CD available at lways use configurated CD solid model to determine critical dimensions G DIMENSIONS Size C Ø D E F G 12 in mm in mm in mm in mm in mm in mm ST XR OPTIONL ROD EXTENSION XR In vertical applications only, the thrust rod length can be extended by specifying the rod extension option. This does not increase the working stroke, only the length of the thrust rod. NOTE: the XR dimension in the configurator string (extension + stroke) should not exceed the maximum stroke of the specified actuator. Consult Tolomatic for extensions greater than the maximum stroke length. Maximum Stroke Length Size ll Screws in 12 mm 35 in 18 mm 457 in mm 61 in 36 mm 914 in 48 mm 1219 in 6 mm 15 R/GS_25

26 HT Electric Rod-Style ctuator SIZE:,, 5, units: US standard sizeit.tolomatic.com for fast, accurate actuator selection SPECIFICTIONS CTUTOR SIZING HT SIZE 5 SE CTUTOR INERTI INERTI DYNMIC DYNMIC PER/in TORQUE TO CK-_ LOD Reverse Parallel OF OVERCOME CODE TPI LSH RTING** In Line 1:1 2:1 STROKE FRICTION in turns/in in/ft in lbf lbf lb-in 2 lb-in 2 lb-in 2 lb-in 2 lb-in RN ,7 5, RN ,7 5, RN ,556 5, MX. STROKE LED CCUR- CY MX. THRUST* 36 Z ,5 N N(L) ,5 3, N(L) , NM ,3 2, RN ,159 12, RN ,878 12, RN ,159 12, Z ,5 N N(L) ,3 2, N(L) ,25 5, N(L) ,25 5, NM ,347 4, NM ,471 3, NM ,5 2, RN ,868 16, RN ,868 16, Z , N N(L) ,5 5, N(L) ,5 11, N(L) ,25 6, NM ,96 6, NM ,479 7, NM ,15 5, NH(L) ,9 16, RN ,39 23, RN ,997 23, RN ,39 23, CODE N NH NL NM Z RN SN DESCRIPTION all Nut all Nut H-series Low-acklash all Nut all Nut Metric ronze Nut Roller Nut Solid Nut Contact Tolomatic for higher accuracy and lower backlash options. (L) for low backlash ball screws: backlash =.2 (.5 mm) * For SN & Z screws, maximum continuous dynamic thrust subject to Thrust x Velocity limitation. ** For RN, N & NL screws, dynamic load rating reflects 9% reliability for 1 million revolutions. R/GS_

27 RSM HT Electric Rod-Style ctuator SIZE:,, 5, units: metric ** SPECIFICTIONS ** RSM metric actuators use the same leadscrew as the inch actuators. Threaded mounting and dowel pin holes are metric. RSM SIZE 5 SE CTUTOR INERTI INERTI DYNMIC DYNMIC PER/in TORQUE TO CK-_ LOD Reverse Parallel OF OVERCOME CODE LED LSH RTING** In Line 1:1 2:1 STROKE FRICTION mm mm/rev mm/3mm mm N N kg-m 2 x 1-6 kg-m 2 x 1-6 kg-m 2 x 1-6 kg-m 2 x 1-6 N-m 69.6 RN ,562, RN ,562, RN ,921, MX. STROKE LED CCUR- CY MX. THRUST* 914 Z ,121 N N(L) ,121 14, N(L) ,226 7, NM ,516 11, RN ,5 56, RN ,25 56, RN ,5 56, Z ,569 N N(L) ,231 1, N(L) ,95 23, N(L) ,457 22, NM ,44 17, NM ,992 14, NM ,227 11, RN ,999 72, RN ,999 72, Z ,138 N N(L) ,569 26, N(L) ,257 5, N(L) ,95 3, NM ,375 29, NM ,372 33, NM ,78, NH(L) ,382 72, RN ,1 16, RN ,366 16, RN ,1 16, HT CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric Z ronze Nut RN Roller Nut SN Solid Nut Contact Tolomatic for higher accuracy and lower backlash options. (L) for low backlash ball screws: backlash =.2 (.5 mm) * For SN & Z screws, maximum continuous dynamic thrust subject to Thrust x Velocity limitation. ** For RN, N & NL screws, dynamic load rating reflects 9% reliability for 1 million revolutions. R/GS_27

28 HT Electric Rod-Style ctuator SIZE: : CRITICL SPEED CPCITIES SPEED (in/sec) 2 1 SIZE: : CRITICL SPEED CPCITIES sizeit.tolomatic.com for fast, accurate actuator selection PERFORMNCE RN1 3 RN5 RN4 1 STROKE (mm) 2 3 STROKE (in) STROKE (mm) SPEED (mm/sec) CTUTOR SIZING HT SPEED (in/sec) RN1 RN5 RN4 NM2 N2 N5 Z1 1 SIZE: 5: CRITICL SPEED CPCITIES 2 3 STROKE (in) STROKE (mm) SPEED (mm/sec) 15 5 N1 SPEED (in/sec) N2 NM1 N4 NM5 Z1 1 RN1 RN5 STROKE (in) NM25 Max. Stroke SPEED (mm/sec) CODE N NH NL NM Z RN SN DESCRIPTION all Nut all Nut H-series Low-acklash all Nut all Nut Metric ronze Nut Roller Nut Solid Nut R/GS_

29 HT Electric Rod-Style ctuator SIZE: : CRITICL SPEED CPCITIES STROKE (mm) PERFORMNCE 6 RN1 RN2 N53 15 SPEED (in/sec) RN5 RN1 RN4 N2 N4 NM2 NH2 NM1 NM5 Z STROKE (in) 1 5 SPEED (mm/sec) HT SIZE:,5, (Z): PV LIMITS (ronze Nuts) SPEED (mm/sec) , 31,138 Z1 6, 26,689 THRUST (lbf) 5, 4, 3, 2, 5 Z1 Z1 22,1 17,793 13,345 8,896 THRUST (N) 1, 4,448 PV LIMITS SPEED (in/sec) PV LIMITS: ny material which carries a sliding load is limited by heat buildup. The factors that affect heat generation rate in an application are the pressure on the nut in pounds per square inch and the surface velocity in feet per minute. The product of these factors provides a measure of the severity of an application. P x V.1 ( Thrust x CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric CODE DESCRIPTION Z ronze Nut RN Roller Nut SN Solid Nut Speed ((Max. Thrust Rating)) ((Max. Speed Rating)).1 R/GS_29

30 HT Electric Rod-Style ctuator LL & ROLLER LIFE GRPHS SIZE:, **LIFE 3,5 3, 4,, 6,, 8,, 1,, 2,, 4,, 6,, 8,, 1,,, (mm) 2,,, 4,,, 6,,, 8,,, 1,,, sizeit.tolomatic.com for fast, accurate actuator selection 2,,, 15, 2,5 RN4 RN4 RN4 RN5 RN1 PERFORMNCE CTUTOR SIZING N2 THRUST (lbf) 2, 1,5 NM2 RN5 RN1 1, THRUST (N) 1, N5 5, 5 N2 N8 HT SIZE: 5, 1,, 4 2,, ,, 2 6,, 8,, 1,, 4 6 2,, 4,, **LIFE (in) 6,, 8,, 1,, **LIFE [mm (in millions)] 8 1, 2, 4, 6, 8, 1, 2,, 2, 4, 4,, 6, 6,, 8, 1, 8,, 1,,, 2, 12, RN5 NH2 RN1 RN2 5 1, 4 THRUST (lbf) 8, 6, N2 5 RN5 5 RN1 THRUST (kn) 3 4, NM1 N4 2 2, 1 NM5 5 N4 5 N1 2 5 N2 5 NM25 5 NM NM5 8 1 N53 2 NM **LIFE [in (in millions)] , 2, 4, 6, 8, 1, 1 CODE N NH NL NM Z RN SN DESCRIPTION all Nut all Nut H-series Low-acklash all Nut all Nut Metric ronze Nut Roller Nut Solid Nut NOTE: The L 1 expected life of a ball screw linear actuator is expressed as the linear travel distance that 9% of properly maintained ball screw manufactured are expected to meet or exceed. This is not a guarantee and this graph should be used for estimation purposes only. The underlying formula that defines this value is: L 1 = ( C ) 3 l P e L 1 Travel life in millions of units (in or mm), where: C = Dynamic load rating (lbf) or (N) P e = Equivalent load (lbf) or (N) If load is constant across all movements then: actual load = equivalent load l = Screw lead (in/rev) (mm/rev) Use the "Equivalent Load" calculation below, when the load is not constant throughout the entire stroke. In cases where there is only minor variation in loading, use greatest load for life calculations. P e = Where: 3 L 1(P 1 ) 3 +L 2 (P 2 ) 3 +L 3 (P 3 ) 3 +L n (P n ) 3 L P e = Equivalent load (lbf) or (N) P n = Each increment at different load (lbf) or (N) L = Total distanced traveled per cycle (extend + retract stroke) [L = L 1 + L 2 + L 3 + L n ] L n = Each increment of stroke at different load (in) or (mm) R/GS_

31 HT Electric Rod-Style ctuator UCKLING LOD SIZE:, THRUST (lbf) STROKE (mm) PERFORMNCE , 4, RN1 RN4 & 5 N2 15, 3, Z1 NM2 1, 2, RN4 & 5 RN1 1, N5 5, THRUST (N) STROKE (in) 36 4 SIZE: 5 THRUST (lbf) , 7, 6, 5 RN5 5 RN1 5, 5 N2 4, 5 Z1 3, 5 N4 5 NM25 5 NM1 2, 5 NM5 5 N1 1, 1 STROKE (mm) 2 3 STROKE (in) , 3, 25, 2, 15, 1, 5, THRUST (N) HT SIZE: THRUST (lbf)! , RN5 12, NH2 RN1 1, 8, 6, 4, 2, N2 Z1 1 STROKE (mm) 2 3 RN2 NM1 NM2 N4 N53 STROKE (in) NM NOTE: uckling load limits shown assume perfect alignment. It is recommended to use additional safety margin, particularly in high thrust applications 6, 5, 4, 3, 2, 1, THRUST (N) CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric Z ronze Nut RN Roller Nut SN Solid Nut R/GS_31

32 HT Electric Rod-Style ctuator SIZE:,, 5, WEIGHT SE MODEL MOVING PRTS WEIGHT sizeit.tolomatic.com for fast, accurate actuator selection SPECIFICTIONS CTUTOR SIZING (M) SIZE 5 RN Z N RN Z N RN Z N RN IN-LINE lb REVERSE PRLLEL lb PER in OF STROKE lb/in SE WT. lb PER in OF STROKE lb/in MX. STROKE in TEMP. RNGE* F Standard: 4 to 13 Extended:-4 to 14 Contact Tolomatic if operation in the extended range is required. HT WEIGHT SE MODEL MOVING PRTS WEIGHT (M) SIZE 5 RN Z N RN Z N RN Z N RN IN-LINE kg REVERSE PRLLEL kg PER mm OF STROKE g/mm SE WT. kg PER mm OF STROKE g/mm MX. STROKE mm TEMP. RNGE* C Standard: 4 to 54 Extended:-4 to 6 Gasket Kit providing ingress protection against dust and splashing water available upon request Contact Tolomatic if operation in the extended range is required.! * Heat generated by the motor and drive should be taken into consideration as well as linear velocity and work cycle time. For applications that require operation outside of the recommended temperature range, contact Tolomatic. LRGE FRME MOTORS ND SMLLER SIZE CTUTORS: Cantilevered motors need to be supported, if subjected to continuous rapid reversing duty and/or under dynamic conditions. SIDE LODING CONSIDERTIONS: Rod screw actuators are designed to push guided and supported loads and are not meant for applications that require substantial side loading. Please contact Tolomatic for details regarding side loading capabilities. R/GS_

33 HT Electric Rod-Style ctuator SIZE:,, 5, CLCULTING RMS THRUST, RMS VELOCITY ND POWER LIMIT Roller screw actuators have two different operating regions which must be sized: RMS and peak. Peak operation is the maximum speed and/or maximum thrust the actuator that does not factor in dwells. RMS operation is the root mean square calculation of the entire motion cycle including dwells (time at rest). It is extremely important to include all dwells (time at rest) in the RMS calculation. There are instances where peak and RMS specifications can be exceeded, but must be approved by Tolomatic. RMS Thrust, RMS Velocity and Power Limit are calculated using these equations: T RMS = (T i 2 x t i ) (t i ) V RMS = (V 2 i x t i ) (t i ) P = T RMS x V RMS (Watts) (N) (m/sec) NOTE: Denominator represents full cycle time including dwells. Do NOT include dwell times in the numerator. Power Limit Where: T RMS = RMS Thrust V RMS = RMS Velocity T i = Thrust during interval i = sum i = 1 to n V i = verage velocity during interval i t i = Time interval i P = Power limit 5 16 W 284 W 345 W 383 W Use software at sizeit.tolomatic.com for fast, accurate actuator selection LURICTION roller screw actuators require periodic re-lubrication to maintain optimal performance. elow are formulas to help determine lubrication interval. See parts sheets for formula definitions, complete instructions and examples. STEP 1: t L = 45 x (V RMS ) T STEP 2: K T = K Co ( PEK ) -.15 T MX STEP 3: t L = t L x K T RN4 RN5 RN1 RN4 RN5 RN1 K Co Where: t L = asic Lubrication Interval (hours) V RMS = RMS Velocity (in/sec) K T = Thrust Correction Factor K Co = Screw Static Load Factor T PEK = ctuator Peak Thrust Rating T MX =Maximum Cycle Thrust t L = Lubrication Interval (hours) SPECIFICTIONS GRESE ZERK This relubrication system provides extended screw service life Convenient lubrication without disassembly Standard with all HT option actuators Re-lubricate with Tolomatic Grease into the grease zerk located on the rod end. HT 5 RN5 RN1 RN5 RN1 RN2 K Co Qty. 2.5 g + (.1 x mm) 4.8 g + (.1 x mm) 5.3 g + (.18 x mm) 6.6 g + (.18 x mm) Qty..9 oz + (.9 x in).17 oz + (.9 x in).19 oz + (.16 x in).23 oz + (.16 x in) = Stroke length (mm or in) In some applications oil may leak from the grease zerk. In contamination sensitive applications replace grease zerk with plug. R/GS_33

34 HT Electric Rod-Style ctuator SIZE:,,5, DIMENSIONS 3D CD available at lways use configurated CD solid model to determine critical dimensions HT CTUTOR DIMENSIONS NOTE: NOTE: See page R/GS_19 for additional dimensions Motor D C L LMI Motor Mount DD J RP Motor Mount DD K F H + K E F EE E TT Motor SS SS JJ NN LL KK TT SS TT E CC MM Motor NOTE: YM code may change this dimension. lways use configured CD model to determine critical dimensions RR Size EE CL LL Motor G + GG HH Ø PP Stub Shaft E STROKE STROKE JJ TT DD H + STROKE SS KK DD J G + STROKE HT HT (ll Configurations) and 5 HT (Roller Nut Configuration ONLY) have 6 mounting holes, all other configurations have 4 mounting holes. KK [Frame Size] C D E [4x] F JØ K EE in / / N N mm M5x.8 2. M1x M6x N N in / / / N 1/16-27 NPT mm M6x M16x M8x N 1/16-27 NPT in / / /8-27 NPT mm M8x M2x M1x /8-27 NPT in / / / N /8-27 NPT mm M12x M27x M12x N /8-27 NPT 5 R/GS_ / SS (2)

35 HT Electric Rod-Style ctuator SIZE:,,5, HT CTUTOR DIMENSIONS 3D CD available at lways use configurated CD solid model to determine critical dimensions DIMENSIONS NOTE: See page R/GS_19 for additional dimensions Drawing repeated for reference LMI Motor Mount DD J K F DD E Motor RP Motor Mount K D C L DD J F NOTE: HT (ll Configurations) and 5 HT (Roller Nut Configuration ONLY) have 6 mounting holes, all other configurations have 4 mounting holes. DD E H + H + KK STROKE SS NN TT Ø PP Stub Shaft JJ LL G + E KK STROKE EE TT SS JJ LL HH Motor C L SS CC TT G + STROKE STROKE E GG EE TT SS Motor Motor MM RR NOTE: YM code may change this dimension. lways use configured CD model to determine critical dimensions HT Size Z1 G H G H L CC 1:1 CC 2:1 ROLLER NUTS DD GG HH JJ LL [Frame Size] MM NN PP RR TT in N N Ø mm N N in N N mm N N in N mm N in N mm N LL NUTS LL OTHER NUTS Size G H L CC 1:1 CC 2:1 DD GG HH JJ LL [Frame Size] MM NN PP RR TT in N N Ø mm N N in N N mm N N in N N mm N N in N mm N R/GS_35

36 HT HT Rod End Options SIZE:,, 5, SRE SPHERICL ROD END C D E 3D CD available at lways use configurated CD solid model to determine critical dimensions Size Ø C D E F G Ø H J 5 in mm M16x in / F G H J.438 7/ mm M1x in / mm M2x in / mm M27x DIMENSIONS llows for slight misalignment between the load and the actuator (radial and angular). Uses an industry-standard bearing. CLV CLEVIS ROD END PIN Ø INCLUDED D C E F H G Used with the externally threaded rod end when the actuator has to compensate for misalignment or pivot about an axis. Size Ø C D E F G H in /16-2 mm M1x1.25 in /16-2 mm M16x1.5 5 in /4-16 mm M2x1.5 in /4-12 mm M27x2. KEY TO SYMOLS Indicates a note of high importance Indicates incompatibility with option(s) or size(s) Make note of this item R/GS_

37 HT Rod End Options SIZE:,, 5, LC LIGNMENT COUPLER INTERNLLY THREDED END EXTERNLLY THREDED END JM NUT JM NUT 3D CD available at lways use configurated CD solid model to determine critical dimensions E DIMENSIONS C D C 2 SPHERICL MOTION,.625 (1.6) RDIL FLOT MET OPTION JM NUT F THE LIGNMENT COUPLER COMES WITH N INTERNL THRED. IF N EXTERNL THRED IS PREFERRED, THE DDITION OF THE MET OPTION IS REQUIRED. Used in combination with the externally threaded rod end to provide smooth motion and extends actuator life by preventing binding caused by angular or axial misalignment. Not available for use with clevis or trunnion mounts, as they must be rigidly mounted. Size C D E F in.25 7/ mm 6.4 M1x in.25 7/ mm 8. M16x If you need external thread, be sure to also order the MET external rod end HT 5 in.45 3/ mm 1. M2x in.5 1-1/ mm 13.5 M27x MET EXTERNLLY THREDED ROD END C n alternative to the standard internally threaded end. D E Size C D E Ø in.87 7/ mm 22.1 M1x in.87 7/ mm 28. M16x in 1.5 3/ mm 38.1 M-2x in / mm 5.8 M27x R/GS_37

38 HT Mounting Options SIZE:,, 5, FFG FRONT FLNGE MOUNT Used when a bottom-tapped mount is not an option or where bottom support mechanisms are not feasible. Flange can be mounted directly to framework or a bulkhead C D J 3D CD available at lways use configurated CD solid model to determine critical dimensions DIMENSIONS Size Ø C D E F G Ø H J 5 in mm in mm in mm in mm H E HT G F MP2 MOUNTING PLTE D E Used for mountings other than flush. C C L Size C D E Ø in mm in mm in mm RN in mm in mm in mm KEY TO SYMOLS Indicates a note of high importance Indicates incompatibility with option(s) or size(s) Make note of this item R/GS_

39 HT Mounting Options SIZE:,, 5, DIMENSIONS 3D CD available at lways use configurated CD solid model to determine critical dimensions TRR TRUNNION MOUNT Used where space is US standard RSM US standard Metric RSM Metric US standard limited in the (Sizes: rear, of, the 5, ) (Sizes:(+12,,, 5, 16) ) (+12, oth16) RSM US Metric standard oth RSM Metric actuator and when pivoting about an axis is required. C C C DC D : US standard F + STROKE E E F + STROKE E E F (LMI) F (RP) Size C Ø D Ø E CME NUT LL NUT ROLLER NUT CME NUT LL NUT ROLLER NUT in /.9993 N N in /.9993 N N in /.9993 N N in / RSM: Metric F (LMI) F (RP) Size C Ø D Ø E CME NUT LL NUT ROLLER NUT CME NUT LL NUT ROLLER NUT mm / mm / mm / mm / HT FG CK FLNGE MOUNT C L G F C E Used when a bottom-tapped mount is not an option or where bottom support mechanisms are not feasible. Flange can be mounted directly to framework or a bulkhead Not available with LMI (inline) motor mounting D Size Ø C D E F G 5 5 RN in mm in mm in mm in mm in mm R/GS_39

40 HT Mounting Options SIZE:,, 5, PCS EYE MOUNT & PCD CLEVIS MOUNT 3D CD available at lways use configurated CD solid model to determine critical dimensions DIMENSIONS Used when the actuator has to compensate for misalignment or pivot about an axis when free movement is available in the back of the actuator. Not available with LMI (inline) motor mounting Used when the actuator has to compensate for misalignment or pivot about an axis when free movement is available in the back of the actuator. Not available with LMI (inline) motor mounting. FULL RDIUS FULL RDIUS HT Size C Ø D E F G 5 C F E in / / /.751 mm / / / 26.1 in / / /.751 mm / / /.1 in / / / mm / / / 5.1 in / / / 1.51 mm / / / 4. D D G E C KEY TO SYMOLS Indicates a note of high importance Indicates incompatibility with option(s) or size(s) Make note of this item R/GS_

41 HT Mounting Options SIZE:,, 5, XR OPTIONL ROD EXTENSION XR In vertical applications only, the thrust rod length can be extended by specifying the rod extension option. This does not increase the working stroke, only the length of the thrust rod. NOTE: the XR dimension in the configurator string (extension + stroke) should not exceed the maximum stroke of the specified actuator. Consult Tolomatic for extensions greater than the maximum stroke length. 3D CD available at lways use configurated CD solid model to determine critical dimensions Maximum Stroke Length Size 5 DIMENSIONS ll Screws in mm 69.6 in 36 mm in 48 mm in 6 mm 15 HT R/GS_41

42 GS Guided Electric Rod-Style ctuator SIZE: LL units: US standard sizeit.tolomatic.com for fast, accurate actuator selection SPECIFICTIONS CTUTOR SIZING GS GS SIZE COMPOSITE LINER COMPOSITE LINER ERING TYPE GUIDE ROD MX. STROKE LED CCURCY CKLSH MX THRUST* DYNMIC LOD RTING** DYNMIC FRIC- TION TORQUE MOVING PRTS SE CTUTOR INERTI WEIGHT INERTI Reverse Parallel PER/in OF in in TYPE TPI turns/in in/ft in lbf lbf In Line lb-in 2 1:1 lb-in 2 2:1 lb-in 2 STROKE lb-in 2 lb-in ase lb Per Inch lb STNDRD Ø.5 STNDRD Ø.5 OVERSIZED Ø.63 STNDRD Ø.63 STNDRD Ø.63 OVERSIZED Ø SN N.4.5 N SN N.2.3 N SN N.2.2 N Z N.2.2 N N(L) N SN N.4.5 N SN N.2.3 N SN N.2.2 N Z N.2.2 N N(L) N SN N.4.5 N SN N.2.3 N SN N.2.2 N Z N.2.2 N N(L) N SN N.6.7 N SN N.3.3 N SN N.2.2 N Z N.2.2 N N(L) N SN N.6.7 N SN N.3.3 N SN N.2.2 N Z N.2.2 N N(L) N SN N.6.7 N SN N.3.3 N SN N.2.2 N Z N.2.2 N N(L) N CODE N NH NL NM DESCRIPTION all Nut all Nut H-series Low-acklash all Nut all Nut Metric CODE Z RN SN DESCRIPTION ronze Nut Roller Nut Solid Nut Contact Tolomatic for higher accuracy and lower backlash options. (L) for low backlash ball screws: backlash =.2 (.5 mm) * For SN & Z screws, maximum continuous dynamic thrust subject to Thrust x Velocity limitation. ** For RN, N & NL screws, dynamic load rating reflects 9% reliability for 1 million revolutions. R/GS_

43 GS Guided Electric Rod-Style ctuator SIZE: LL units: US standard SPECIFICTIONS GS SIZE ERING TYPE LINER COMPOSITE LINER COMPOSITE GUIDE ROD MX. STROKE LED CCURCY CKLSH MX THRUST* DYNMIC LOD RTING** DYNMIC FRIC- TION TORQUE MOVING PRTS SE CTUTOR INERTI WEIGHT INERTI Reverse Parallel PER/in OF in in TYPE TPI turns/in in/ft in lbf lbf In Line lb-in 2 1:1 lb-in 2 2:1 lb-in 2 STROKE lb-in 2 lb-in ase lb Per Inch lb STNDRD Ø.75 STNDRD Ø.75 OVERSIZED Ø1. STNDRD Ø1. STNDRD Ø1. OVERSIZED Ø1.25 CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric 3 SN N SN N SN N Z N N(L) , N(L) , SN N SN N SN N Z N N(L) , N(L) , SN N SN N SN N Z N N(L) , N(L) , SN N SN N Z N N(L) , N(L) , NM , SN N SN N Z N N(L) , N(L) , NM , SN N SN N Z N N(L) , N(L) , NM , CODE DESCRIPTION Z ronze Nut RN Roller Nut SN Solid Nut Contact Tolomatic for higher accuracy and lower backlash options. (L) for low backlash ball screws: backlash =.2 (.5 mm) * For SN & Z screws, maximum continuous dynamic thrust subject to Thrust x Velocity limitation. ** For RN, N & NL screws, dynamic load rating reflects 9% reliability for 1 million revolutions. GS R/GS_43

44 GSM Guided Electric Rod-Style ctuator sizeit.tolomatic.com for fast, accurate actuator selection SPECIFICTIONS SIZE: LL units: metric ** ** GSM metric actuators use the same leadscrew as the GS inch actuators. Threaded mounting and dowel pin holes are metric. CTUTOR SIZING GS GSM SIZE ERING TYPE LINER COMPOSITE LINER COMPOSITE GUIDE ROD MX. STROKE LED CCURCY CKLSH MX THRUST* DYNMIC THRUST RTING** DYNMIC FRIC- TION TORQUE MOVING PRTS SE CTUTOR INERTI INERTI WEIGHT PER/ Reverse Parallel 25mm OF mm mm TYPE LED mm/rev mm/3 mm N In Line kg-m 2 x1-6 1:1 kg-m 2 x1-6 2:1 kg-m 2 x1-6 STROKE kg-m 2 x1-6 N-m ase Kg Per Inch Kg STNDRD Ø12.7 STNDRD Ø12.7 OVERSIZED Ø15.9 STNDRD Ø15.9 STNDRD Ø15.9 OVERSIZED Ø19.1 CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric SN N N SN N N SN N N Z N N N(L) , N SN N N SN N N SN N N Z N N N(L) , N SN N N SN N N SN N N Z N N N(L) , N SN N N SN N N SN N N Z N N N(L) , N SN N N SN N N SN N N Z N N N(L) , N SN N N SN N N SN N N Z N N N(L) , N CODE DESCRIPTION Z ronze Nut RN Roller Nut SN Solid Nut Contact Tolomatic for higher accuracy and lower backlash options. (L) for low backlash ball screws: backlash =.2 (.5 mm) * For SN & Z screws, maximum continuous dynamic thrust subject to Thrust x Velocity limitation. ** For RN, N & NL screws, dynamic load rating reflects 9% reliability for 1 million revolutions. R/GS_

45 GSM Guided Electric Rod-Style ctuator SPECIFICTIONS SIZE: LL units: metric ** ** GSM metric actuators use the same leadscrew as the GS inch actuators. Threaded mounting and dowel pin holes are metric. GSM SIZE ERING TYPE LINER COMPOSITE LINER COMPOSITE GUIDE ROD MX. STROKE LED CCURCY CKLSH MX THRUST* DYNMIC THRUST RTING** DYNMIC FRIC- TION TORQUE MOVING PRTS SE CTUTOR INERTI INERTI WEIGHT PER/ Reverse Parallel 25mm OF mm mm TYPE LED mm/rev mm/3 mm N In Line kg-m 2 x1-6 1:1 kg-m 2 x1-6 2:1 kg-m 2 x1-6 STROKE kg-m 2 x1-6 N-m ase Kg Per Inch Kg STNDRD Ø19.1 STNDRD Ø19.1 OVERSIZED Ø25.4 STNDRD Ø25.4 STNDRD Ø25.4 OVERSIZED Ø31.8 CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric 762. SN N SN N SN N Z ,781 N N(L) ,67 6, N(L) ,781 4, SN N SN N SN N Z ,781 N N(L) ,67 6, N(L) ,781 4, SN N SN N SN N Z ,781 N N(L) ,67 6, N(L) ,781 4, SN N SN ,334 N Z ,492 N N(L) ,375 14, N(L) ,226 7, NM ,58 11, SN N SN ,334 N Z ,492 N N(L) ,375 14, N(L) ,226 7, NM ,58 11, SN N SN ,334 N Z ,492 N N(L) ,375 14, N(L) ,226 7, NM ,58 11, CODE DESCRIPTION Z ronze Nut RN Roller Nut SN Solid Nut Contact Tolomatic for higher accuracy and lower backlash options. (L) for low backlash ball screws: backlash =.2 (.5 mm) * For SN & Z screws, maximum continuous dynamic thrust subject to Thrust x Velocity limitation. ** For RN, N & NL screws, dynamic load rating reflects 9% reliability for 1 million revolutions. GS R/GS_45

46 GS Guided Electric Rod-Style ctuator SIZE: 12,16: CRITICL SPEED CPCITIES STROKE (mm) SPEED (in/sec) sizeit.tolomatic.com for fast, accurate actuator selection SN1 SN2 SN5 N8 Z STROKE (in) PERFORMNCE CTUTOR SIZING SPEED (mm/sec) SIZE: : CRITICL SPEED CPCITIES STROKE (mm) N2 GS SPEED (in/sec) SN2 SN4 N5 SN8 Z1 1 5 SPEED (mm/sec) STROKE (in) CODE DESCRIPTION CODE N all Nut Z NH all Nut H-series RN NL Low-acklash all Nut SN NM all Nut Metric DESCRIPTION ronze Nut Roller Nut Solid Nut R/GS_

47 GS Guided Electric Rod-Style ctuator SIZE: : CRITICL SPEED CPCITIES STROKE (mm) PERFORMNCE 15 5 SN1 NM2 SPEED (in/sec) N2 SN2 N5 1 5 SPEED (mm/sec) Z STROKE (in) 36 SIZE: 12,16: PV LIMITS (Solid Nuts) 7 SPEED (mm/sec) 635 1,27 1,95 2,54 3, THRUST (lbf) THRUST (N) GS PV LIMITS Z1 SN SPEED (in/sec) PV LIMITS: ny material which carries a sliding load is limited by heat buildup. The factors that affect heat generation rate in an application are the pressure on the nut in pounds per square inch and the surface velocity in feet per minute. The product of these factors provides a measure of the severity of an application. SN2 P x V.1 ( Thrust x SN1 CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric CODE DESCRIPTION Z ronze Nut RN Roller Nut SN Solid Nut Speed ((Max. Thrust Rating)) ((Max. Speed Rating)).1 R/GS_47

48 GS Guided Electric Rod-Style ctuator SIZE:, (SN): PV LIMITS (Solid Nuts) SPEED (mm/sec) sizeit.tolomatic.com for fast, accurate actuator selection PERFORMNCE ,16 1,27 3 1,334 CTUTOR SIZING THRUST (lbf) THRUST (N) SN8 SN4 SN2 SN2 SPEED (in/sec) SN1 SIZE:, (Z): PV LIMITS (ronze Nuts) SPEED (mm/sec) , 4,448 Z1 Z1 GS THRUST (lbf) 5 2,2 THRUST (N) PV LIMITS SPEED (in/sec) PV LIMITS: ny material which carries a sliding load is limited by heat buildup. The factors that affect heat generation rate in an application are the pressure on the nut in pounds per square inch and the surface velocity in feet per minute. The product of these factors provides a measure of the severity of an application. P x V.1 ( Thrust x CODE DESCRIPTION N all Nut NH all Nut H-series NL Low-acklash all Nut NM all Nut Metric CODE DESCRIPTION Z ronze Nut RN Roller Nut SN Solid Nut Speed ((Max. Thrust Rating)) ((Max. Speed Rating)).1 R/GS_

49 GS Guided Electric Rod-Style ctuator LL LIFE GRPHS SIZE: 12, 16,, 3,5 3, N2 4,, 6,, 8,, 1,, 2,, 4,, **LIFE 6,, 8,, 1,,, (mm) 2,,, 4,,, 6,,, 8,,, 1,,, 2,,, PERFORMNCE 15, 2,5 THRUST (lbf) 2, 1,5 NM2 1, THRUST (N) 1, N5 5, 5 N2,N5 16 N5 1,, NOTE: The L 1 expected life of a ball screw linear actuator is expressed as the linear travel distance that 9% of properly maintained ball screw manufactured are expected to meet or exceed. This is not a guarantee and this graph should be used for estimation purposes only. 12,16 N8 2,, 4,, 6,, 8,, The underlying formula that defines this value is: L 1 = ( C ) 3 l P e 1,, 2,, **LIFE (in) L 1 Travel life in millions of units (in or mm), where: C = Dynamic load rating (lbf) or (N) P e = Equivalent load (lbf) or (N) If load is constant across all movements then: actual load = equivalent load l = Screw lead (in/rev) (mm/rev) 4,, 6,, 8,, 1,, 2,, 4,, 6,, 8,, 1,,, Use the "Equivalent Load" calculation below, when the load is not constant throughout the entire stroke. In cases where there is only minor variation in loading, use greatest load for life calculations. P e = Where: 3 L 1(P 1 ) 3 +L 2 (P 2 ) 3 +L 3 (P 3 ) 3 +L n (P n ) 3 L P e = Equivalent load (lbf) or (N) P n = Each increment at different load (lbf) or (N) L = Total distanced traveled per cycle (extend + retract stroke) [L = L 1 + L 2 + L 3 + L n ] L n = Each increment of stroke at different load (in) or (mm) UCKLING LOD SIZE: 12, 16,, THRUST (lbf) , 4,448 N N5 Z1 N5 N2 STROKE (mm) Z1 N2 NM2 2,2 THRUST (N) GS 12,16 N8! STROKE (in) NOTE: uckling load limits shown assume perfect alignment. It is recommended to use additional safety margin, particularly in high thrust applications CODE N NH NL NM 4 DESCRIPTION all Nut all Nut H-series Low-acklash all Nut all Nut Metric CODE DESCRIPTION Z ronze Nut RN Roller Nut SN Solid Nut R/GS_49

50 GS Guided Electric Rod-Style ctuator SIZE: LL sizeit.tolomatic.com for fast, accurate actuator selection SPECIFICTIONS CTUTOR SIZING GS (M) SIZE frame 23 frame Guide Rod STD OVR STD OVR STD OVR STD OVR STD OVR WEIGHT SE MODEL IN-LINE lb REVERSE PRLLEL lb PER in OF STROKE lb/in MX. STROKE in TEMP. RNGE* F Standard: 4 to 13 Extended: -4 to 14 GS (M) SIZE frame 23 frame Contact Tolomatic if operation in the extended range is required. 16 Guide Rod STD OVR STD OVR STD OVR STD OVR STD OVR WEIGHT SE MODEL IN-LINE kg REVERSE PRLLEL kg PER in OF STROKE g/mm MX. STROKE mm TEMP. RNGE* C Standard: 4-54 Extended: -4 to 6 Gasket Kit providing ingress protection against dust and splashing water available upon request Contact Tolomatic if operation in the extended range is required.! * Heat generated by the motor and drive should be taken into consideration as well as linear velocity and work cycle time. For applications that require operation outside of the recommended temperature range, contact Tolomatic. GS LRGE FRME MOTORS ND SMLLER SIZE CTUTORS: Cantilevered motors need to be supported, if subjected to continuous rapid reversing duty and/or under dynamic conditions. SIDE LODING CONSIDERTIONS: Rod screw actuators are designed to push guided and supported loads and are not meant for applications that require substantial side loading. Please contact Tolomatic for details regarding side loading capabilities. R/GS_

51 GS Guided Electric Rod-Style ctuator SIZE: 12 MX. LOD WEIGHT & GUIDE ROD DEFLECTION PERFORMNCE MXIMUM LOD WEIGHT vs STROKE LENGTH MXIMUM LOD GS12 Linear all earing, Standard Shaft Linear all earing, Standard Guide Rods MXIMUM LOD WEIGHT vs STROKE LENGTH MXIMUM LOD GS12 Composite Composite earing, earing, Standard Standard Guide Rods Shaft MXIMUM LOD WEIGHT vs STROKE LENGTH MXIMUM LOD GS12 Composite earing, Oversize Shaft Composite earing, Oversize Guide Rods SYSTEM SPEED SYSTEM SPEED Linear ball bearings are not available with stainless steel guide rod option. DO NOT EXCEED MXIMUM LOD CURVE Maximum load values are based on 2 million linear inches of travel. 1. To obtain most accurate results, stroke length should be adjusted by the distance between the center of mass of the load and tooling plate. DEFLECTION GS12 Composite Standard earing, Guide Rods Standard Shaft 1 1 GUIDE ROD DEFLECTION XS STROKE LENGTH (mm.) DEFLECTION." (1.626mm)." (.813mm).16" (.46mm).8" (.23mm).4" (.12mm).2" (.51mm) DEFLECTION GS12 Composite Oversize earing, Guide Rods Oversize Shaft 1 1 GUIDE ROD DEFLECTION XS STROKE LENGTH (mm.) DEFLECTION." (1.626mm)." (.813mm).16" (.46mm).8" (.23mm).4" (.12mm).2" (.51mm) X adj = X s + X cm Then, use X adj instead of X s on the Maximum Load Weight vs. Stroke Length graph For the off-center loads, calculate adjusted load weight using the following formula: W adj = W ( Y cm ) XS STROKE LENGTH (in.) XS STROKE LENGTH (in.) where Y cm is distance between center of mass of off-center load and center of tooling plate. Then, use W adj instead of W on Maximum Load Weight vs. Stroke Length graph. 3. Using your stroke length and load weight, evaluate guide rod deflection. If the intersection point is above the highest curve (."), contact Tolomatic for assistance. OFF-CENTER LOD W adj W LOD GS! Impact loading is not recommended for GS/GSM actuators. Motor brakes may be required on vertically positioned actuators with plastic (solid) or ball nuts in applications with risk of load backdriving. (ctuators with bronze nuts will not backdrive for loads, thrusts within catalog specifications.) Contact Tolomatic for assistance. Y-XIS: DISTNCE TO LOD'S CENTER OF MSS X-XIS: DISTNCE TO LOD'S CENTER OF MSS STROKE LENGTH R/GS_51

52 GS Guided Electric Rod-Style ctuator SIZE: 16 MX. LOD WEIGHT & GUIDE ROD DEFLECTION sizeit.tolomatic.com for fast, accurate actuator selection PERFORMNCE CTUTOR SIZING MXIMUM LOD GS16 Linear all earing, Standard Shaft Linear all earing, Standard Guide Rods W LOD WEIGHT (lbs.) MXIMUM LOD WEIGHT vs STROKE LENGTH Xs STROKE LENGTH (mm.) W LOD WEIGHT (kgs.) W LOD WEIGHT (lbs.) MXIMUM LOD WEIGHT vs STROKE LENGTH MXIMUM LOD GS16 Composite Composite earing, earing, Standard Standard Guide Rods Shaft Xs STROKE LENGTH (mm.) SYSTEM SPEED 6" (152mm)/sec. 12" (35mm)/sec. 18" (457mm)/sec. " (61mm)/sec. 3" (762mm)/sec W LOD WEIGHT (kgs.) W LOD WEIGHT (lbs.) MXIMUM LOD WEIGHT vs STROKE LENGTH MXIMUM LOD GS16 Composite earing, Oversize Shaft Composite earing, Oversize Guide Rods Xs STROKE LENGTH (mm.) SYSTEM SPEED 6" (152mm)/sec. 12" (35mm)/sec. 18" (457mm)/sec. " (61mm)/sec. 3" (762mm)/sec W LOD WEIGHT (kgs.) Xs STROKE LENGTH (in.) Xs STROKE LENGTH (in.) Xs STROKE LENGTH (in.) GS Linear ball bearings are not available with stainless steel guide rod option. DO NOT EXCEED MXIMUM LOD CURVE Maximum load values are based on 2 million linear inches of travel. 1. To obtain most accurate results, stroke length should be adjusted by the distance between the center of mass of the load and tooling plate. X adj = X s + X cm Then, use X adj instead of X s on the Maximum Load Weight vs. Stroke Length graph. 2. For the off-center loads, calculate adjusted load weight using the following formula: W adj = W ( Y cm ) where Y cm is distance between center of mass of off-center load and center of tooling plate. Then, use W adj instead of W on Maximum Load Weight vs. Stroke Length graph. 3. Using your stroke length and load weight, evaluate guide rod deflection. If the intersection point is above the highest curve (."), contact Tolomatic for assistance. DEFLECTION GS16 Composite Standard earing, Guide Rods Standard Shaft GUIDE ROD DEFLECTION Xs STROKE LENGTH (mm.) DEFLECTION." (1.626mm)." (.813mm).16" (.46mm).8" (.23mm).4" (.12mm).2" (.51mm) Xs STROKE LENGTH (in.) OFF-CENTER LOD W adj W LOD DEFLECTION GS16 Composite Oversize earing, Guide Rods Oversize Shaft GUIDE ROD DEFLECTION Xs STROKE LENGTH (mm.) DEFLECTION." (1.626mm)." (.813mm).16" (.46mm).8" (.23mm).4" (.12mm).2" (.51mm) Xs STROKE LENGTH (in.) ! Impact loading is not recommended for GS/GSM actuators. Motor brakes may be required on vertically positioned actuators with plastic (solid) or ball nuts in applications with risk of load backdriving. (ctuators with bronze nuts will not backdrive for loads, thrusts within catalog specifications.) Contact Tolomatic for assistance. Y-XIS: DISTNCE TO LOD'S CENTER OF MSS X-XIS: DISTNCE TO LOD'S CENTER OF MSS STROKE LENGTH R/GS_

53 GS Guided Electric Rod-Style ctuator SIZE: MX. LOD WEIGHT & GUIDE ROD DEFLECTION PERFORMNCE W LOD WEIGHT (lbs.) MXIMUM LOD WEIGHT vs STROKE LENGTH MXIMUM LOD GS Linear Linear all earing, all earing, Standard Standard Guide Rods Shaft Xs STROKE LENGTH (mm.) Xs STROKE LENGTH (in.) W LOD WEIGHT (kgs.) W LOD WEIGHT (lbs.) MXIMUM LOD WEIGHT vs STROKE LENGTH MXIMUM LOD GS Composite Composite earing, earing, Standard Standard Guide Rods Shaft Xs STROKE LENGTH (mm.) SYSTEM SPEED 6" (152mm)/sec. 12" (35mm)/sec. 18" (457mm)/sec. " (61mm)/sec. 3" (762mm)/sec Xs STROKE LENGTH (in.) W LOD WEIGHT (kgs.) MXIMUM LOD GS Composite earing, earing, Oversize Oversize Guide Rods Shaft W LOD WEIGHT (lbs.) MXIMUM LOD WEIGHT vs STROKE LENGTH Xs STROKE LENGTH (mm.) SYSTEM SPEED 18 6" (152mm)/sec. 12" (35mm)/sec. 18" (457mm)/sec. 9.1 " (61mm)/sec. 3" (762mm)/sec Xs STROKE LENGTH (in.) W LOD WEIGHT (kgs.) Linear ball bearings are not available with stainless steel guide rod option. DO NOT EXCEED MXIMUM LOD CURVE Maximum load values are based on 2 million linear inches of travel. 1. To obtain most accurate results, stroke length should be adjusted by the distance between the center of mass of the load and tooling plate. X adj = X s + X cm Then, use X adj instead of X s on the Maximum Load Weight vs. Stroke Length graph. 2. For the off-center loads, calculate adjusted load weight using the following formula: W adj = W (1 +.4 Y cm ) where Y cm is distance between center of mass of off-center load and center of tooling plate. Then, use W adj instead of W on Maximum Load Weight vs. Stroke Length graph. 3. Using your stroke length and load weight, evaluate guide rod deflection. If the intersection point is above the highest curve (."), contact Tolomatic for assistance. DEFLECTION GS Composite Standard earing, Guide Rods Standard Shaft GUIDE ROD DEFLECTION Xs STROKE LENGTH (mm.) DEFLECTION." (1.626mm)." (.813mm).16" (.46mm).8" (.23mm).4" (.12mm).2" (.51mm) Xs STROKE LENGTH (in.) OFF-CENTER LOD W adj WLOD DEFLECTION GS Composite Oversize earing, Guide Rods Oversize Shaft GUIDE ROD DEFLECTION Xs STROKE LENGTH (mm.) DEFLECTION." (1.626mm)." (.813mm).16" (.46mm).8" (.23mm).4" (.12mm).2" (.51mm) Xs STROKE LENGTH (in.) GS! Impact loading is not recommended for GS/GSM actuators. Motor brakes may be required on vertically positioned actuators with plastic (solid) or ball nuts in applications with risk of load backdriving. (ctuators with bronze nuts will not backdrive for loads, thrusts within catalog specifications.) Contact Tolomatic for assistance. Y-XIS: DISTNCE TO LOD'S CENTER OF MSS X-XIS: DISTNCE TO LOD'S CENTER OF MSS STROKE LENGTH R/GS_53

54 GS Guided Electric Rod-Style ctuator SIZE: MX. LOD WEIGHT & GUIDE ROD DEFLECTION sizeit.tolomatic.com for fast, accurate actuator selection PERFORMNCE CTUTOR SIZING MXIMUM LOD WEIGHT vs STROKE LENGTH MXIMUM LOD GS Linear Linear all earing, all earing, Standard Standard Guide Rods Shaft MXIMUM LOD WEIGHT vs STROKE LENGTH MXIMUM LOD GS Composite Composite earing, earing, Standard Standard Guide Rods Shaft MXIMUM LOD WEIGHT vs STROKE LENGTH MXIMUM LOD GS Composite Composite earing, earing, Oversize Oversize Guide Rods Shaft SYSTEM SPEED SYSTEM SPEED Linear ball bearings are not available with stainless steel guide rod option. DO NOT EXCEED MXIMUM LOD CURVEX adj = X s + X cm X adj X s W adj = W (1 +.3 Y cm )Y cm W adj W DEFLECTION Standard Guide Rods GS Composite earing, Standard Shaft Xs STROKE LENGTH (mm.) GUIDE ROD DEFLECTION DEFLECTION." (1.626mm)." (.813mm).16" (.46mm).8" (.23mm).4" (.12mm).2" (.51mm) DEFLECTION GS Composite Oversize earing, Guide Rods Oversize Shaft GUIDE ROD DEFLECTION Xs STROKE LENGTH (mm.) DEFLECTION." (1.626mm)." (.813mm).16" (.46mm).8" (.23mm).4" (.12mm).2" (.51mm) Xs STROKE LENGTH (in.) Xs STROKE LENGTH (in.) GS OFF-CENTER LOD W adj W LOD! Impact loading is not recommended for GS/GSM actuators. Motor brakes may be required on vertically positioned actuators with plastic (solid) or ball nuts in applications with risk of load backdriving. (ctuators with bronze nuts will not backdrive for loads, thrusts within catalog specifications.) Contact Tolomatic for assistance. Y-XIS: DISTNCE TO LOD'S CENTER OF MSS X-XIS: DISTNCE TO LOD'S CENTER OF MSS STROKE LENGTH R/GS_

55 GS Guided Electric Rod-Style ctuator DIMENSIONS 3D CD available at LL SIZE: lways use configurated CD solid model to determine critical dimensions D C LMI Motor Mount J RP Motor Mount N E CC P H L K F S Y + C L R G U W C L C L STROKE C L V M T FF X EE DD JJ DD LL KK FF JJ Motor EE DD MM GG DD C L LL KK HH MM Motor Motor Motor GS Size in mm in 1/4-2 Ø OPP M6x1. Ø OPP D E F G H J [4x] Ø.266 Thru Ø6.76 Thru 2.5 5/16-18 Ø OPP Ø.266 Thru mm M8x1.25 Ø OPP /16-18 Ø OPP mm M8x1.25 Ø OPP in in 6.25 C [4x] /8-16 mm M1x1.5 Ø.53.5 OPP Ø OPP Ø6.76 Thru Ø.8 Thru Ø8.33 Thru Ø.453 Thru Ø1.49 Thru Ø / OPP Ø M OPP Ø / OPP Ø M OPP Ø / OPP Ø M1 1.5 OPP Ø / OPP Ø M12x1.75 OPP R/GS_55

56 GS Guided Electric Rod-Style ctuator SIZE: Size Size L M Ø [2x] N P R S T Ø [4x] U V W X Ø [4x] Y in / mm M6x in / mm M6x in / mm M8x in mm M1x Motor Frame GS lways use configurated CD solid model to determine critical dimensions K DIMENSIONS 3D CD available at LL in CC 1:1 CC 2: mm in mm in mm in EE N FF [2x] GG JJ KK LL MM M4x M4x M4x NOTE: YM code may change this dimension. lways use configured CD to determine critical dimensions See dimensional drawing on previous page / M6x / mm M6x in HH mm in DD 3/ / mm M8x in / mm M8x CK & CKS STOP COLLRS Provides a positive stop mechanism when required. STNDRD GUIDE RODS Size Motor R/GS_56 Ø in mm in mm in mm in mm OVERSIZED GUIDE RODS Size Ø in mm in mm in mm in mm

57 & GS Electric Rod-Style ctuators SWITCHES & GS products offer a wide range of sensing choices. There are 12 switch choices: reed, solid state PNP (sourcing) or solid state NPN (sinking); in normally open or normally closed; with flying leads or quick-disconnect. Commonly used for end-of-stroke positioning, these switches allow installation anywhere along the entire actuator length. The internal magnet is a standard feature. Switches can be installed in the field at any time. Switches are used to send digital signals to PLC (programmable logic controller), TTL, CMOS circuit or other controller device. Switches contain reverse polarity protection. Solid state QD cables are shielded; shield should be terminated at flying lead end. ll switches are CE rated and are RoHS compliant. Switches feature bright red or yellow LED signal indicators; solid state switches also have green LED power indicators. ST RoHS COMPLINT Order Code Lead Switching Logic Power LED Signal LED Operating Voltage **Power Rating (Watts) Switching Current (m max.) Current Consumption Voltage Drop Leakage Current Temp. Range Shock / Vibration REED RY RK 5m QD* SPST Normally Open Red NY 5m SPST Yellow Normally NK QD* Closed C/DC 5-11 C/DC **1. 1m 3. V max. HT SOLID STTE TY 5m PNP Green Yellow (Sourcing) Normally TK QD* Open KY KK PY PK HY HK 5m QD* 5m QD* 5m QD* NPN (Sinking) Normally Open PNP (Sourcing) Normally Closed NPN (Sinking) Normally Closed Green Green Green Red Yellow Red VDC **3. 1m *QD = Quick-disconnect Enclosure classification IEC 529 IP67 (NEM 6) CLES: Robotic grade, oil resistant polyurethane jacket, PVC insulation 2 V 2. V max. **WRNING: Do not exceed power rating (Watt = Voltage x mperage). Permanent damage to sensor will occur..5 m max. 14 to 158 F [-1 to 7 C] 5 G / 9 G GS SWITCH INSTLLTION Place switch bracket into one of the four slots that run the length of the extruded tube. Note that there is a cutout on the actuator head () or tube (GS) to allow insertion of the bracket. Insert the switch with the word Tolomatic facing up and slide it under the bracket. Position the bracket with the switch to the exact location desired, then lock them securely into place by tightening both set screws on the bracket. R/GS_57

58 ST & GS Electric Rod-Style ctuators WIRING DIGRMS RY RK REED NORMLLY OPEN RN NORMLLY OPEN LU or NORMLLY OPEN RN LU LOD LOD TY TK SOLID STTE NORMLLY OPEN PNP RN NORMLLY OPEN PNP (SOURCING) LK LU + SIGNL LOD - KY KK SOLID STTE NORMLLY OPEN NPN NORMLLY OPEN NPN (SINKING) RN LK LU SWITCHES + LOD SIGNL - NY NK REED NORMLLY CLOSED RN NORMLLY CLOSED LU LOD or NORMLLY CLOSED RN LU LOD PY PK SOLID STTE NORMLLY CLOSED PNP NORMLLY CLOSED PNP (SOURCING) RN LK LU + SIGNL LOD - HY HK SOLID STTE NORMLLY CLOSED NPN RN NORMLLY CLOSED NPN (SINKING) LK LU + LOD SIGNL - HT QUICK DISCONNECT MLE PLUG PINOUT LCK (SIGNL) LUE (-) ROWN (+) QUICK DISCONNECT FEMLE SOCKET PINOUT LCK (SIGNL) ROWN (+) LUE (-) SWITCH DIMENSIONS _ Y - direct connect DETECTION POINT SOLID STTE DETECTION POINT REED MOUNTING DIMENSIONS.33 [8.4].63 [16.].29 [7.4].83 [21.1] [512] GS _ K - QD (Quick-disconnect) switch M8x1 Ø.35 [9] 1.5 [38.2] This screw secures switch to bracket This screw secures bracket to actuator - QD Cable 1.26 [.1] Ø.28 [7].95 [.1] [347] 197 [5] Dimensions shown in inches [dimensions in brackets millimeters] M8x1 CUTION: DO NOT OVERTIGHTEN SWITCH HRDWRE WHEN INSTLLING Size in mm in mm R/GS_

59 PPLICTION DT WORKSHEET Fill in known data. Not all information is required for all applications ORIENTTION GS Horizontal Incline a Horizontal Horizontal Side Incline a Vertical Load supported by actuator OR Load supported by other mechanism Vertical d x dx d x ST MOVE PROFILE EXTEND Move Distance inch millimeters (US Standard) (Metric) Move Time sec Max. Speed in/sec mm/sec Dwell Time fter Move sec RETRCT Move Distance inch millimeters Move Time sec Max. Speed in/sec mm/sec Dwell Time fter Move sec NO. OF CYCLES per minute per hour HOLD POSITION? Required Not Required fter Move During Power Loss STROKE LENGTH inch millimeters (US Standard) (Metric) DISTNCE FROM dx TOOLING PLTE TO dy LOD CENTER OF dz GRVITY* inch millimeters *NOTE: Use for GS only, requires external support and guidance for load MOTION PROFILE + Speed ( ) PRECISION Repeatability inch millimeters OPERTING ENVIRONMENT Temperature, Contamination, Water, etc. CTUTOR SIZING Time or Distance ( ) FREE: On-line sizing and selection at sizeit. tolomatic.com Or Call for Excellent Customer Service & Technical Support Graph your most demanding cycle, including accel/decel, velocity and dwell times. You may also want to indicate load variations and I/O changes during the cycle. Label axes with proper scale and units. HT NOTE: If load or force changes during cycle use the highest numbers for calculations EXTEND LOD lb. kg. (U.S. Standard) (Metric) FORCE lbf. N (U.S. Standard) (Metric) RETRCT LOD lb. kg. (U.S. Standard) (Metric) FORCE lbf. N (U.S. Standard) (Metric) - CONTCT INFORMTION Name, Phone, Co. Name, Etc. GS USE THE TOLOMTIC SIZING ND SELECTION SOFTWRE VILLE ON-LINE T OR... CLL TOLOMTIC T We will provide any assistance needed to determine the proper actuator for the job. FX EMIL help@tolomatic.com R/GS_59

60 ST HT GS & GS Electric Rod-Style ctuators Selection Guidelines 1ESTLISH MOTION PROFILE Using the application stroke length, desired cycle time, loads and forces, establish the motion profile details including linear velocity and thrust in each of its segments. 2SELECT CTUTOR TYPE If side (radial) loads are present, select GS. 3SELECT CTUTOR SIZE ND TYPE ased on the required velocities and thrust select an actuator size and type and lead of screw drive. 4VERIFY CRITICL SPEED OF THE Verify that the application s peak linear velocity does not exceed the critical speed value for the size and lead of the screw selected. 5VERIFY XIL UCKLING STRENGTH OF THE Verify that the peak thrust does not exceed the critical buckling force for the size of the screw selected. 6 COMPRE PPLICTION S PEK PRMETERS TO PEK CPCITY (PEK REGION) OF SELECTED CTUTOR (ROLLER ) When a roller screw is selected, calculate the application s required peak thrust and peak velocity and compare to the graphs. The selection must satisfy the application s peak requirements. 7COMPRE PPLICTION S CONTINUOUS OPERTION PRMETERS TO CONTINUOUS OPERTION CPCITY (CONTINUOUS DUTY REGION) OF SELECTED CTUTOR (ROLLER ) When a roller screw is selected, calculate the application s continuous operation thrust and velocity and compare to the graph. The selection must satisfy the application s peak requirements. 8CLCULTE LURICTION INTERVL (ROLLER ) When a roller screw is selected, calculate the recommended lubrication interval. See page R/GS_33 and parts sheets for complete lubrication information for the,, 5 and. 9TEMPERTURE CONSIDERTIONS If the application s ambient temperature lies outside of the allowed range [roller screw: 5 to 122 F (1 to 5 C), all others 4 to 13 F (4 to 54 C), contact the factory. Note that in aggressive applications where roller screw is used, outside temperature of the actuator s body can approach 18 F (82 C), and adequate clearance to avoid overheating of other system components should be allowed. 1 ESTLISH TOTL TORQUE REQUIREMENTS Calculate total system inertia, the peak and the RMS torque required from the motor to overcome internal friction, external forces and accelerate/decelerate the load. 11 SELECT MOTOR ND CONTROLLER Use the obtained total torque value to select a motor and a reduction device (if required). Verify that the peak torque value is below the motor s peak torque curve, and that the continuous torque value is below the motor s continuous torque curve. Verify the minimum torque margin (15%). Verify the inertia match. Select a controller. 12 SELECT MOTOR-CTUTOR CONFIGURTION ND SENSORS IF REQUIRED Select an inline or a reverse-parallel motor configuration. Select mounting and rod end options. Select position sensors (if required). 12 sensor choices include: reed, solid state PNP or NPN, all in normally open or normally closed, with flying leads or quick-disconnect couplers. 13 SELECT ROD END OPTIONS ND MOUNTING OPTIONS Rod end options include: CLV clevis rod end, SRE spherical rod end, MET externally threaded rod end, LC alignment coupler, XR rod extension. Mounting options include: TRN trunnion mount, FFG front flange mount, MP2 mounting plates, FM2 foot mount, PCD clevis mount, PCS eye mount, FG back flange mount. The above guidelines are for reference only. Use Tolomatic online sizing software for best results. CTUTOR SIZING FREE: On-line sizing and selection at sizeit. tolomatic.com Or Call for Excellent Customer Service & Technical Support R/GS_

61 & GS Electric Rod-Style ctuators Code Size ST HT Description RSM RSM RSM RSM RSM RSM RSM For all motor mounts FFG Front Flange Mount MP2 Mounting Plate * * *Mounting Plate with 23 frame motor or YMH Option (for 12 size only) For RP motor mounting only FM2 Foot Mount N N FG ack Flange Mount PCS Eye Mount PCD Clevis Mount FM2 Not available with HT option Size ST HT Description RSM RSM RSM RSM RSM RSM RSM CLV Clevis End SRE Spherical Rod Eye MET External Threaded LC* lignment Coupler N N Code CTUTOR MOUNTING REPLCEMENT KITS ROD END REPLCEMENT KITS *NOTE: lignment coupler is internally threaded, if external thread is desired order MET also GS OPTIONS REPLCEMENT KITS SIZE Description Stop Collar Stainless Steel Stop Collar & GS SWITCHES To order switch kit use configuration code for switch preceded by SW and actuator code. EXMPLE: SWKK KIT CTUTOR SIZE SWITCH CODE The example is for Solid State NPN, Normally Open Switch with Quick-disconnect couplers. Each switch kit is complete with racket, Set Screw, Switch and mating QD cable. Note that the bracket/switch size is common and may be used on any size. NOTE: Refer to parts sheets to replace switches on actuators manufactured before N = Not vailable SIZE Description Over-Sized Stop Collar Stainless Steel Over-Sized Stop Collar Kits include one collar and required fasteners SERVICE PRTS ORDERING Code R Y R K N Y N K T Y T K K Y K K P Y P K H Y H K Lead 5m (197 in) Quick-disconnect 5m (197 in) Quick-disconnect 5m (197 in) Quick-disconnect 5m (197 in) Quick-disconnect 5m (197 in) Quick-disconnect 5m (197 in) Quick-disconnect Normally Open Closed Open Open Closed Closed Sensor Type Reed Reed Solid State PNP Solid State NPN Solid State PNP Solid State NPN ST HT GS R/GS_61

62 ST HT ST & HT Electric Rod-Style ctuator ORDERING MODEL & MOUNTING Rod-Style Screw- Drive ctuator, inch mounting RSM metric mounting SIZE 12, 16,,, 5, NUT/ SIZE CODE TURNS/in (TPI) SN 1,2,5 12 Z 1 N, NL 8 SN 1,2,5 16 Z 1 N, NL 8 SN 2,4,8 Z 1 N,NL 2,5 RN 4,5,1 SN 1,2 Z 1 N,NL 2,5 NM 2 RN 4,5,1 SN 4 Z 1 5 N,NL 1,2,4 NM 5,1,25 RN 5,1 SN 4 Z 1 N,NL 2,4,53 NM 5,1,2 NH 2 RN 5,1,2 STROKE LENGTH SK. Enter desired stroke length in decimal inches MXIMUM STROKE SIZE in mm , ,5. C T U T O R MOTOR MOUNTING LMI In-line motor mount RP1 1:1 ratio, reverse parallel motor mount RP2 2:1 ratio, reverse parallel motor mount RP2 not available on 12 or 16 size STNDRD OR HIGH TORQUE ST1 Standard RS ctuator HT* High Torque Option *requires keyed motor HT not available on 12 or 16 size NOTE: RN always requires HT option TRUNNION MOUNT TRR Trunnion mount Not available on 12 or 16 size with LMI motor mount NOTE: Trunnion mount is not available for field retrofit, contact Tolomatic for details CTUTOR MOUNTING For all motor mounts: FFG Front Flange Mount MP2 Mounting Plates (2 required) For RP motor mounting only: FM2* Foot Mount (2 required) PCD Clevis Mount PCS Eye Mount FG ack Flange Mount *FM2 not available with HT option O P T I O N S 5 N2 SK35 RP1 ST1 FFG XR6 LC MET KK2 YM ENVIRONMENTL PROTECTION IP67 asic ingress protection (, 5, only) LU Grease, Food/Drug *HT actuator (LMI & RP); ST actuator(rp motor mount only) Not all codes listed are compatible with all options. Contact Tolomatic with any questions. ROD EXTENSION XR. Enter desired rod extension in decimal inches For vertical applications only. NOTE: The XR extension + stroke should not exceed the max. stroke of the specified actuator. (See MX. STROKE table) Consult Tolomatic for extensions greater than the max. stroke length. ROD END Internally threaded rod end is standard CLV Clevis Rod End SRE Spherical Rod End MET Externally Threaded Rod End LC lignment Coupler Rod End* *NOTE: lignment coupler is internally threaded, if external thread is desired order MET also TYPE LOGIC REED SPST SOLID STTE SWITCHES NORMLLY Open Closed PNP Open NPN Open PNP Closed NPN Closed QUICK- DISCONNECT CODE QUNTITY LED LENGTH no yes no yes no yes no yes no yes no yes RY RK NY NK TY TK KY KK PY PK HY HK fter code enter quantity desired 5 meters (16.4 feet) YOUR MOTOR HERE YM Motor mount for non- Tolomatic motor. 15 DYS UILT-TO-ORDER R/GS_

63 GS Guided Electric Rod-Style ctuator ORDERING C T U T O R O P T I O N S GS N2 SK23 RP1 CSO CKS KK2 YM MODEL & MOUNTING GS Guided Screw-Drive ctuator, inch mounting GSM metric mounting SIZE 12, 16,, NUT/ COMINTIONS SIZE CODE TURNS/in (TPI) SN 1,2,5 12 Z 1 N, NL 8 SN 1,2,5 16 Z 1 N, NL 8 SN 2,4,8 Z 1 N,NL 2,5 SN 1,2 Z 1 N,NL 2,5 NM 2 STROKE LENGTH SK. Enter desired stroke length in decimal inches MXIMUM STROKE GS SIZE in mm MOTOR MOUNTING LMI In-line motor mount RP1 1:1 ratio, reverse parallel motor mount RP2 2:1 ratio, reverse parallel motor mount RP2 not available on 12 or 16 size ERINGS & GUIDE RODS (GS ONLY) L Linear earings* C Composite earings, Standard Size Rods CO Composite earings, Over Sized Rods CS Composite earings, Standard Size Stainless Steel Rods CSO Composite earings, Over- Sized Stainless Steel Rods *Stainless steel guide rods not available with Linear earings STOP COLLR (GS ONLY) CK Steel Stop Collar CKS Stainless Steel Stop Collar NOTE: The correct Stop Collar will be automatically chosen based on the bearing and guide rod previously selected. Not all codes listed are compatible with all options. Contact Tolomatic with any questions. TYPE LOGIC REED SPST SOLID STTE SWITCHES NORMLLY Open Closed PNP Open NPN Open PNP Closed NPN Closed QUICK- DISCONNECT CODE QUNTITY LED LENGTH no yes no yes no yes no yes no yes no yes RY RK NY NK TY TK KY KK PY PK HY HK fter code enter quantity desired 5 meters (16.4 feet) YOUR MOTOR HERE YM Motor mount for non- Tolomatic motor. FOOD GRDE LURICTION LU Grease, Food/Drug GS 15 DYS UILT-TO-ORDER R/GS_63

64 The Tolomatic Difference Expect More From the Industry Leader: INNOVTIVE PRODUCTS Tolomatic designs and builds the best standard products, modified products & unique custom products for your challenging applications. FST DELIVERY The fastest delivery of catalog products... Electric products are built-to-order in 15 or 2 days; Pneumatic & Power Transmission products in 5 days. CTUTOR SIZING Online sizing that is easy to use, accurate and always up-to-date. Find a Tolomatic electric actuator to meet your requirements. YOUR MOTOR HERE Match your motor with compatible mounting plates that ship with any Tolomatic electric actuator. LIRRY SUPERIOR SERVICE Our people make the difference! Expect prompt, courteous replies to all of your application and product questions. Easy to access CD files available in the most popular formats to place directly into your assembly. lso Consider These Other Tolomatic Products: Electric Products Rod & Guided Rod Style ctuators, High Thrust ctuators, Screw & elt Drive Rodless ctuators, Motors, Drives and Controllers Foldout rochure # Pneumatic Products Rodless Cylinders: and Cylinders, Cable Cylinders, Magnetically Coupled Cylinders/Slides; Guided Rod Cylinder Slides Foldout rochure # Power Transmission Products Gearboxes: Float--Shaft, Slide-Rite ; Disc Cone Clutch; Caliper Disc rakes Foldout rochure # US 38 County Road 116 Hamel, MN 5534, US Phone: (763) Fax: (763) Toll-Free: sales@tolomatic.com EUROPE Tolomatic Europe GmbH Zeilweg Frankfurt am Main Germany Phone: EuropeSales@tolomatic.com ll brand and product names are trademarks or registered trademarks of their respective owners. Information in this document is believed accurate at time of printing. However, Tolomatic assumes no responsibility for its use or for any errors that may appear in Visit for the most up-to-date technical information 8 CHIN Tolomatic utomation Products (Suzhou) Co. Ltd. (ServoWeld inquiries only) No. 6 Chuangye Street, uilding 2 Huqiu District, SND Suzhou Jiangsu P.R. China Phone: +86 (512) Fax: +86 (512) ServoWeldChina@tolomatic.com this document. Tolomatic reserves the right to change the design or operation of the equipment described herein and any associated motion products without notice. Information in this document is subject to change without notice. 218 TOLOMTIC LITERTURE NUMER: _4