REVISED DynaFlex_021516_final_no logos.qxp_layout 1 5/10/17 1:56 PM Page 1 See back cover to learn about R single path to optimal performance www.dynawave.com DynaFlex RF and microwave cable assemblies Broadband performance up to 40 GHz Low density, DynaCore dielectric technology Design options to optimize mechanical or electrical characteristics Low loss, phase stable Excellent mechanical compression strength Stainless steel connectors Rugged strain relief design DynaFlex series cable assemblies employ innovative designs and material technology to deliver optimized electrical and mechanical performance across a wide range of RF & microwave applications. DynaFlex assemblies utilize our DynaCore dielectric technology to provide enhanced mechanical resistance to crush and kinking while delivering low loss and phase stable electrical performance. DynaCore is the industry s most compression-resistant ETFE dielectric that protects against damage related to difficult routing, cable clamping and field installation. DynaFlex assemblies are designed with robust, double-walled strain relief shrink DynaCore Technology Our industry-leading dielectric core technology provides unique advantages for your component or system design. tubing at the connector-cable junction and high temperature jacketing to ensure reliable, long service life. DynaFlex assemblies are available with standard connector options for rapid availability and ease of ordering. Custom connector and jacketing options are available for specific application requirements.
100 Series Best All-Around Performance DynaFlex 100 Series assemblies are designed for applications requiring a combination of excellent low loss electrical performance and robust physical characteristics. DynaFlex 100 Series features our advanced, low density DynaCore ETFE dielectric with a reliable tri-shield construction. The use of two woven braids with a wrapped interlayer foil provides resistance to damage from axial torque and challenging mechanical applications. Standard Product Configurations Part Number Connector Configuration Cable Type Frequency SMSM-A5PH-XXX SMA straight plug to SMA straight plug DF118 18 GHz SRSR-A5PH-XXX SMA right angle plug to SMA right angle plug DF118 18 GHz SMSR-A5PH-XXX SMA straight plug to SMA right angle plug DF118 18 GHz NMNM-A5PH-XXX N straight plug to N straight plug DF118 18 GHz NRNR-A5PH-XXX N right angle plug to N right angle plug DF118 18 GHz NMNR-A5PH-XXX N straight plug to N right angle plug DF118 18 GHz TMTM-A5PH-XXX TNC straight plug to TNC straight plug DF118 18 GHz NMNM-A6PH-XXX N straight plug to N straight plug DF126 18 GHz SMSM-A6RH-XXX SMA straight plug to SMA straight plug DF126 26 GHz SMSM-A7RH-XXX SMA straight plug to SMA straight plug DF140 26 GHz KMKM-A7KH-XXX 2.92 mm straight plug to 2.92 mm straight plug DF140 40 GHz EMEM-A7KH-XXX 2.4 mm straight plug to 2.4 mm straight plug DF140 40 GHz NMNM-A5PH-XXX SMSM-A6RH-XXX KMKM-A7KH-XXX RoHS All assemblies listed are RoHS Compliant Part Numbering System XXXX-XX XX-XXX length: inches Example: 36 inches = 036 max operating frequency: PH = 18 GHz RH = 26 GHz KH = 40 GHz Cable codes: A5 = DF118 A6 = DF126 A7 = DF140 Connector type: SM = SMA straight plug SR = SMA right angle plug SB = SMA bulkhead jack NM = N straight plug NR = N right angle plug TM = TNC straight plug TR = TNC right angle plug KM = 2.92 mm straight plug EM = 2.4 mm straight plug General Specifications DF118 DF126 DF140 Frequency (maximum) 18 GHz 26 GHz 40 GHz Impedance 50 Ohms 50 Ohms 50 Ohms Velocity of Propagation 78% 78% 78% Operating Temperature - 45 C to +125 C -45 C to +125 C -45 C to +125 C Outer Cable Diameter (nom.) 0.300 inch (7.62 mm) 0.208 inch (5.28 mm) 0.155 inch (3.94 mm) Minimum Bend Radius 1.50 inch (38.10 mm) 1.04 inch (26.42 mm) 0.80 inch (20.32 mm) Flexure Life (5x min. bend radius) > 10,000 > 10,000 > 10,000 Cable Weight (lbs/ft, kg/m) 0.10 lbs/ft (0.15 kg/m) 0.05 lbs/ft (0.07 kg/m) 0.03 lbs/ft (0.05 kg/m) Material and Finish Cable Jacket Fluoroplastic, type IX (per ASTM D2116) or type X (per ASTM D3159) Cable Dielectric DynaCore expanded PTFE, Type F (per ASTM D4894 & D4895) First Shield Silver plated copper (per ASTM B298) Secondary Shield High temperature, aluminum polyimide foil Third Shield Silver plated copper (per ASTM B298) Cable Center Conductor Solid, silver plated copper (per ASTM B298) Strain Relief Shrink Boots Polyolefin (per M23053) Connector Housing Passivated stainless steel (per ASTM-A-582, type 303) Connector Dielectric PTFE (per ASTM-D-1710-02 or polystyrene/polyethylene thermoplastic) Connector Center Contacts BeCu, gold plated (per ASTM-B-488, type 1) Contact sales for additional connector interface and configuration options.
DF118 Cable Assembly VSWR Phase Stability v. Flexure (+/- deg.) Connector 1 Connector 2 18 GHz 26 GHz 40 GHz Frequency DF118 DF126 DF140 Straight Straight 1.30:1 1.35:1 1.40:1 Straight Right Angle 1.35:1 Right Angle Right Angle 1.40:1 @10 GHz 15 15 15 @18 GHz 27 27 27 Measured with 360 loop at 5x minimum bend radius Cable Assembly Insertion Loss Calculation: (Cable Loss x Length) + (Connector 1 Loss) + (Connector 2 Loss) + (Mismatch Loss) Freq Cable Loss (maximum) Connector Loss (db) (GHz) DF118 DF126 DF140 Straight Right Angle db/ft db/m db/ft db/m db/ft db/m 1 0.062 0.204 0.086 0.282 0.139 0.455 0.031 0.037 3 0.111 0.364 0.157 0.515 0.248 0.814 0.039 0.047 6 0.164 0.537 0.234 0.767 0.360 1.182 0.052 0.062 12 0.246 0.806 0.354 1.161 0.529 1.737 0.077 0.092 18 0.313 1.026 0.455 1.494 0.668 2.191 0.102 0.122 26 0.576 1.888 0.828 2.715 0.136 0.163 32 0.936 3.071 0.161 0.193 40 1.071 3.512 0.194 0.233 Mismatch Loss VSWR Loss (db) 1.30:1 0.070 1.35:1 0.090 1.40:1 0.115 Maximum loss specification represents performance approximately 10% higher than typical. See Dynawave website for Insertion Loss calculator to quickly determine assembly loss at any frequency.
200 Series Best Electrical Performance DynaFlex 200 Series assemblies are optimized for applications where low loss or phase stability is the primary application characteristic. DynaFlex 200 Series features our advanced DynaCore ETFE dielectric with a wrapped inner foil shield that minimizes attenuation and improves phase stability with flexure. The 200 Series assemblies are recommended for use with applications that have radial torque requirements less than 15 in-lbs (1.69 Nm). NMNM-A9PH-XXX Standard Product Configurations Part Number Connector Configuration Cable Type Frequency SMSM-A9PH-XXX SMA straight plug to SMA straight plug DF218 18 GHz SRSR-A9PH-XXX SMA right angle plug to SMA right angle plug DF218 18 GHz SMSR-A9PH-XXX SMA straight plug to SMA right angle plug DF218 18 GHz NMNM-A9PH-XXX N straight plug to N straight plug DF218 18 GHz NRNR-A9PH-XXX N right angle plug to N right angle plug DF218 18 GHz NMNR-A9PH-XXX N straight plug to N right angle plug DF218 18 GHz TMTM-A9PH-XXX TNC straight plug to TNC straight plug DF218 18 GHz NMNM-B1PH-XXX N straight plug to N straight plug DF226 18 Ghz SMSM-B1RH-XXX SMA straight plug to SMA straight plug DF226 26 GHz KMKM-E9WH-XXX 2.92 mm straight plug to 2.92 mm straight plug DF232 32 GHz EMEM-E9WH-XXX 2.4 mm straight plug to 2.4 mm straight plug DF232 32 GHz SMSM-B1RH-XXX KMKM-E9WH-XXX RoHS All assemblies listed are RoHS Compliant Part Numbering System General Specifications DF218 DF226 DF232 XXXX-XX XX-XXX length: inches Example: 36 inches = 036 max operating frequency: PH = 18 GHz RH = 26 GHz WH = 32 GHz Cable codes: A9 = DF218 B1 = DF226 E9 = DF232 Connector type: SM = SMA straight plug SR = SMA right angle plug SB = SMA bulkhead jack NM = N straight plug NR = N right angle plug TM = TNC straight plug TR = TNC right angle plug KM = 2.92 mm straight plug EM = 2.4 mm straight plug Frequency (maximum) 18 GHz 26 GHz 32 GHz Impedance 50 Ohms 50 Ohms 50 Ohms Velocity of Propagation 84% 84% 84% Operating Temperature - 45 C to +125 C -45 C to +125 C -45 C to +125 C Outer Cable Diameter (nom.) 0.295 inch (7.49 mm) 0.215 inch (5.46 mm) 0.185 inch (4.70 mm) Minimum Bend Radius 1.50 inch (38.10 mm) 1.10 inch (27.94 mm) 0.92 inch (23.37 mm) Flexure Life (5x min. bend radius) > 1,000 > 1,000 > 1,000 Cable Weight (lbs/ft, kg/m) 0.09 lbs/ft (0.13 kg/m) 0.05 lbs/ft (0.07 kg/m) 0.04 lbs/ft (0.06 kg/m) Material and Finish Cable Jacket Fluoroplastic, type IX (per ASTM D2116) or type X (per ASTM D3159) Cable Dielectric DynaCore expanded PTFE, Type F (per ASTM D4894 & D4895) First Shield Silver plated copper (per ASTM B298) Secondary Shield Silver plated copper (per ASTM B298) Cable Center Conductor Solid, silver plated copper (per ASTM B298) Strain Relief Shrink Boots Polyolefin (per M23053) Connector Housing Passivated stainless steel (per ASTM-A-582, type 303) Connector Dielectric PTFE (per ASTM-D-1710-02) Connector Center Contacts BeCu, gold plated (per ASTM-B-488, type 1) Contact sales for additional connector interface and configuration options.
DF118 Cable Assembly VSWR Phase Stability v. Flexure (+/- deg.) Connector 1 Connector 2 18 GHz 26 GHz 32 GHz Frequency DF218 DF226 DF232 Straight Straight 1.30:1 1.35:1 1.40:1 Straight Right Angle 1.35:1 Right Angle Right Angle 1.40:1 @10 GHz 1.5 1.5 1.5 @18 GHz 2.7 2.7 2.7 Measured with 360 loop at 5x minimum bend radius Cable Assembly Insertion Loss Calculation: (Cable Loss x Length) + (Connector 1 Loss) + (Connector 2 Loss) + (Mismatch Loss) Freq Cable Loss (maximum) Connector Loss (db) (GHz) DF218 DF226 DF232 Straight Right db/ft db/m db/ft db/m db/ft db/m Angle 1 0.050 0.165 0.073 0.238 0.086 0.283 0.031 0.037 3 0.087 0.286 0.130 0.424 0.154 0.504 0.039 0.047 6 0.125 0.411 0.190 0.624 0.224 0.736 0.052 0.062 12 0.181 0.593 0.280 0.918 0.330 1.083 0.077 0.092 18 0.226 0.741 0.354 1.161 0.418 1.370 0.102 0.122 26 0.440 1.442 0.520 1.705 0.136 0.163 32 0.588 1.929 0.161 0.193 Mismatch Loss VSWR Loss (db) 1.30:1 0.070 1.35:1 0.090 1.40:1 0.115 Maximum loss specification represents performance approximately 10% higher than typical. See Dynawave website for Insertion Loss calculator to quickly determine assembly loss at any frequency.
400 Series Best Flexure Performance DynaFlex 400 Series assemblies are designed for dynamic flexure applications requiring a balance of low loss electrical performance and highly-engineered mechanical elements that allow flexure up to 500,000 cycles. The 400 Series features our advanced DynaCore ETFE dielectric with a stranded center conductor and polyurethane jacketing to maximize flexibilty and performance. NMNM-B7PW-XXX Standard Product Configurations Part Number Connector Configuration Cable Type Frequency SMSM-B7PW-XXX SMA straight plug to SMA straight plug DF418W 18 GHz SRSR-B7PW-XXX SMA right angle plug to SMA right angle plug DF418W 18 GHz SMSR-B7PW-XXX SMA straight plug to SMA right angle plug DF418W 18 GHz NMNM-B7PW-XXX N straight plug to N straight plug DF418W 18 GHz NRNR-B7PW-XXX N right angle plug to N right angle plug DF418W 18 GHz NMNR-B7PW-XXX N straight plug to N right angle plug DF418W 18 GHz TMTM-B7PW-XXX TNC straight plug to TNC straight plug DF418W 18 GHz NMNM-B8PW-XXX N straight plug to N straight plug DF426W 18 Ghz SMSM-B8RW-XXX SMA straight plug to SMA straight plug DF426W 26 GHz SMSM-B9RW-XXX SMA straight plug to SMA straight plug DF440W 26 GHz KMKM-B9KW-XXX 2.92 mm straight plug to 2.92 mm straight plug DF440W 40 GHz EMEM-B9KW-XXX 2.4 mm straight plug to 2.4 mm straight plug DF440W 40 GHz SMSM-B8RW-XXX KMKM-B9KW-XXX RoHS All assemblies listed are RoHS Compliant Part Numbering System General Specifications DF418W DF426W DF440W XXXX-XX XX-XXX length: inches Example: 36 inches = 036 max operating frequency: PW = 18 GHz RW = 26 GHz KW = 40 GHz Cable codes: B7 = DF418W B8 = DF426W B9 = DF440W Connector type: SM = SMA straight plug SR = SMA right angle plug SB = SMA bulkhead jack NM = N straight plug NR = N right angle plug TM = TNC straight plug TR = TNC right angle plug KM = 2.92 mm straight plug EM = 2.4 mm straight plug Frequency (maximum) 18 GHz 26 GHz 40 GHz Impedance 50 Ohms 50 Ohms 50 Ohms Velocity of Propagation 78% 78% 78% Operating Temperature - 45 C to +85 C -45 C to +85 C -45 C to +85 C Outer Cable Diameter (nom) 0.345 inch (8.76 mm) 0.235 inch (5.97 mm) 0.180 inch (4.57 mm) Minimum Bend Radius 1.72 inch (43.69 mm) 1.18 inch (29.97 mm) 0.90 inch (22.86 mm) Flexure Life (5x min. bend radius) > 500,000 > 500,000 > 500,000 Cable Weight (lbs/ft, kg/m) 0.10 lbs/ft (0.15 kg/m) 0.05 lbs/ft (0.07 kg/m) 0.03 lbs/ft (0.05 kg/m) Material and Finish Cable Jacket Polyurethane, type XII (per MIL-DTL-17) Cable Dielectric DynaCore expanded PTFE, Type F (per ASTM D4894 & D4895) First Shield Silver plated copper (per ASTM B298) Secondary Shield Conductive tape (proprietary) Third Shield Silver plated copper (per ASTM B298) Cable Center Conductor Stranded, silver plated copper (per ASTM B298) Strain Relief Shrink Boots Polyolefin (per M23053) Connector Housing Passivated stainless steel (per ASTM-A-582, type 303) Connector Dielectric PTFE (per ASTM-D-1710-02 or polystyrene/polyethylene thermoplastic) Connector Center Contacts BeCu, gold plated (per ASTM-B-488, type 1) Contact sales for additional connector interface and configuration options.
Cable Assembly VSWR Connector 1 Connector 2 18 GHz 26 GHz 40 GHz Straight Straight 1.30:1 1.35:1 1.40:1 Straight Right Angle 1.35:1 Right Angle Right Angle 1.40:1 Phase Stability v. Flexure (+/- deg.) Frequency DF418W DF426W DF440W @10 GHz 15 15 15 @18 GHz 27 27 27 Measured with 360 loop at 5x minimum bend radius Cable Assembly Insertion Loss Calculation: (Cable Loss x Length) + (Connector 1 Loss) + (Connector 2 Loss) + (Mismatch Loss) Freq Cable Loss (maximum) Connector Loss (db) (GHz) DF418W DF426W DF440W Straight Right db/ft db/m db/ft db/m db/ft db/m Angle 1 0.062 0.204 0.127 0.416 0.190 0.624 0.031 0.037 3 0.119 0.390 0.227 0.745 0.338 1.109 0.039 0.047 6 0.182 0.598 0.331 1.087 0.488 1.602 0.052 0.062 12 0.286 0.940 0.488 1.602 0.715 2.347 0.077 0.092 18 0.378 1.239 0.618 2.027 0.898 2.945 0.102 0.122 26 0.767 2.516 1.107 3.634 0.136 0.163 32 1.249 4.097 0.161 0.193 40 1.424 4.673 0.194 0.233 Mismatch Loss VSWR Loss (db) 1.30:1 0.070 1.35:1 0.090 1.40:1 0.115 Maximum loss specification represents performance approximately 10% higher than typical. See Dynawave website for Insertion Loss calculator to quickly determine assembly loss at any frequency.
DynaFlex standard cable assemblies in custom lengths YOU REQUEST A QUOTE 24 Contact us Monday-Thursday and receive a quote within 24 hours. Contact us Friday or on a Holiday and receive your quote the next business day. WE SHIP CUSTOM within 2 WEEKS 2 Place your order by email or phone, and we will ship your custom length product within 2 weeks. Quantity: up to 25 units DynaCore Technology HOMOGENEOUS, EXPANDED PTFE STRUCTURES Round geometry becomes oval in tight bends, causing low impedance sections in coaxial cables. Low impedance results in low phase shift and high VSWR. DynaCore technology produces smooth, homogeneous, low density PTFE structures with enhanced mechanical and electrical characteristics. Competitive products apply multiple layers of PTFE tapes wrapped over each other, resulting in air gaps which cause variations in density and signal reflections. Bend PTFE Tape DynaCore Radius Ovality Ovality 2x outer 2.4% 0% diameter COMPRESSION- RESISTANT ETFE CORES DynaCore has 5x more compression resistance than PTFE tape. 40 lbs/in equals the weight of the average adult stepping on an unprotected section of DynaCore with no measurable change in diameter. 80 lbs/in equals the force of an over-tightened cable clamp, producing only a 1% change in the core diameter. Compression PTFE Tape DynaCore Force Diameter Diameter Change Change (78% VP core) (78% VP core) 40 lbs/in 3% 0% 80 lbs/in 8% 1% Advantages for Your Design Dynawave 135 Ward Hill Avenue Haverhill, MA 01835 Telephone: (978) 469-0555 Fax: (978) 521-4589 www.dynawave.com DF-022016