386
This chapter contains an overview of the RICO marine for various loads and applications subdivided in product families. Content Table of content Page 40 mm side height 390 387
System overview cable ladder 160P1... 160P15... 160P15... 160P11... A 160P3... 388
Content This cable ladder was developed especially for the shipbuilding. Furthermore it is applicable in the industry and in tunneling, nuclear power plants and plant construction. By the slotted rung design the cables can be fixed fast and easily with cable ties. The new continuous perforation of the sides makes it possible to screw the wall connection pieces steplessly and without drilling. The cable ladder is flexibel in application and can be used for the vertical cable run as well as for the horizontal one. Table of contents Page cable ladder marine cable ladder 390 Molded components for marine cable ladder bend: 45 160 P3... 391 extension tee: 160P15... 391 Rungs for marine cable ladder rungs made of trapezoidal profile 392 rungs 392 rungs 392 Accessory for marine cable ladder straight joint 160P11A 393 mushroom head screw 393 cable ladder 389
bend 160P3..., extension tee 160P15... Material Technical data Field of application sheet steel hot dip galvanized according to DIN EN ISO 1461 side height 40 mm material thickness 5mm suitable for marine cable ladder cable ladder Molded components for marine cabla ladder OP3... OP15... Ordering information bend 45 Width hot dip galv. 100 160P3100 2.20 200 160P3200 2.43 300 160P3300 3.09 400 160P3400 3.53 500 160P3500 3.98 600 160P3600 4.42 700 160P3700 4.86 800 160P3800 5.31 900 160P3900 5.75 1000 160P31000 6.19 extension tee Width hot dip galv. 100 160P15100 2.90 200 160P15200 3.11 300 160P15300 3.31 400 160P15400 3.52 500 160P15500 3.73 600 160P15600 3.94 700 160P15700 4.14 800 160P15800 4.35 900 160P15900 4.56 1000 160P151000 4.76 391
cable ladder Rungs for marine cable ladder P4... rungs made of trapezoidal profile 16P4...A, rungs 16P4...B / 16P4...C Material Field of application sheet steel blank hot dip galvanized according to DIN EN ISO 1461 suitable for all ladder widths of 100mm to 1000 mm for welding in the marine cable ladder as additionally or afterwards Ordering information rungs made of trapezoidal profile Width blank 100 16P4100A 0.01 200 16P4200A 0.02 300 16P4300A 0.03 400 16P4400A 0.04 500 16P4500A 0.05 600 16P4600A 0.06 700 16P4700A 0.08 800 16P4800A 0.09 900 16P4900A 0.10 1000 16P41000A 0.11 rungs, Length = 3000 mm Galvanisation Width material thickness blank 30 16P43000B 0.83 5.0 hot dip galv. 30 16P43000BF 0.88 5.0 rungs, Length = 3000 mm Galvanization Width Material thickness blank 50 16P43000C 1.62 5.0 hot dip galv. 50 16P43000CF 1.73 5.0 392
straight joint 160P11A, mushroom head screw 16J60825 cable ladder Accessory for marine cable ladder 0P11A Material Technical data sheet steel hot dip galvanized according to DIN EN ISO 1461 straight joint for a form fitting lengthwise aligned connection Field of application demand, 2 pieces per joint place potential equalisation by screwing the sides suitable for marine Ordering information straight joint Height hot dip galv. 41 160P11A 0.27 incl. 2 screws 16J6P (M8x16) mushroom head screw with flange nut hot dip galv. 16J60825 0.03 393