LPD HD-T, HD-RV Post drivers heavy-duty
Contents Contents General information................................................................ 5..................................................................... 6 LPD-HD-T....................................................................... 6 LPD-HD-RV..................................................................... 0 Remote valve................................................................... Tightening torque................................................................. 6 Working tools..................................................................... 7 Driver kits...................................................................... 7 Working tools.................................................................. 8 Accessories....................................................................... 9 Hoses and couplings........................................................... 9 Kits............................................................................... 0 Seal kit........................................................................ 0 Label kit....................................................................... 3
General information This spare parts list applies to the following: 80 0 00 80 50 00 Hydraulic post driver LPD-HD-T Hydraulic post driver LPD-HD-RV Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! 5
LPD-HD-T 8 79 6 3 5 6 78 7 0 7 6 5 3 77 3 6 39 37 38 5 3 55 63 53 66 5 67 5 56 5758596066636656667 6 7 7 65 59 6 63 66 67 57 58 6 60 9 5 6 30 8 50 0 7 3 0 9 8 9 0 3 9 35 68 3 3 33 68 3 3 78 7 75 7 7 73 5 57 6 70 76 8 53 69 9 5 36 6
No. Quantity (-7) 3 5 6 7 8(9-) 9 0 3 5(6-8) 6 7 8 9 0 3 5 6 7 8 9 30 3 3 33 3 35 36 37 38 39 0 Accumulator, complete Accumulator body Diaphragm Accumulator cover Charging screw Protective nut Valve housing, complete Valve housing Fitting 0 Fitting 0 Ball Check valve screw Cylinder, complete Cylinder Fitting 0 Fitting 0 Piston Spool Guide socket Spool socket Locking ring Seal Wiper Roll pin Back-up washer 8.7/3 x mm 0.3/0.5 x 0.039 in. M x.5 mm Use LOCTITE 5 Use LOCTITE 5 9/ x mm 0.35/0.55 x 0.039 in. Use LOCTITE 5 Use LOCTITE 5 M0 x 35 mm, Use LOCTITE 5 Use LOCTITE 5 Use LOCTITE 5 x.5 mm 0.9 x 0.06 in. 8 x mm 0.7 x 0.08 in. 3 x mm.6 x 0.08 in. 5. x.78 mm 0.99 x 0.07 in. 38/5 x 6 mm.50/.77 x 0. in. 38/8 x 7/0 mm.50/.89 x 0.8/0.39 in. ½ in. BSP (T) for 0 l/min, ½ in. BSP (T) for 35 l/min, ½ in. BSP (T) for 30 l/min, ½ in. BSP (T) for 0 l/min, ½ in. BSP 6 x 30 mm 0. x.8 in. 30 x mm.8 x 0.08 in. 6 x mm 0. x 0.08 in. 8 x mm 0.3 x 0.08 in. 8 x.5 mm 3.3 x 0.06 in. 8 x.5 mm 0.7 x 0.06 in. 337 80 337 80 7 337 80 5 337 80 66 337 87 09 337 83 03 3376 70 7 337 80 5-337 87 33 337 83 337 807 7 337 807 8 337 80 6 337 80 30-337 87 33 337 83 337 80 8 337 87 3 337 80 65 337 80 66 337 80 67 337 807 0 337 807 03 337 807 05 337 807 6 337 807 5 337 807 9 337 807 5 337 8057 337 8057 337 88 0 337 880 3 337 8057 337 807 3 337 807 0 337 877 57 3376 000 8 337 857 35 337 807 5 337 807 8 7
No. Quantity 3 5 6 7 8 9 50 5 5 53 5 55 56(57-67) 57 58 59 60 6 6 63 6 65 66 67 68 69 70 7 7 73 Top plate Back-up washer Locking ring Nose part Bottom plate Bushing Handle Washer Lifting bracket Trigger valve, complete Circlip Shim Trigger spool Trigger rod Packing gland Spring Seal Back-up ring Circlip Protective cap Trigger lever Trigger housing Trigger Cylinder pin 3 x.5 mm 0.5 x 0.06 in. 38.7/8 x.5 mm.5/.89 x 0.98 in. Welded assembly Hex 3 x 60 mm ( x 6 5 6 in.), Use LOCTITE 68 M x 75 mm, Use LOCTITE 5 M0 x 5 mm, Use LOCTITE 5 0 mm 0.39 in. M0 x 0 mm, Use LOCTITE 5 PS 8 x x 0.5 mm 0.3 x 0.55 x 0.0 in. 8.3 x. mm 0.33 x 0.09 in. 6.3 x. mm 0.6 x 0.09 in. 8/ x 3.5/5 mm 0.7/0.55 x 0./0.0 in. ½ in. BSP M6 x 5 mm 9.53 x 5. mm 3 8 x in. 337 87 9 337 80 8 337 80 60 337 807 50 337 8 337 80 337 80 9 337 807 53 337 80 88 3376 000 0 3377 000 0 337 80 9 337 877 337 800 53 337 87 3 337 807 00 337 80 08 337 80 36 337 8 0 337 80 37 337 87 00 337 87 0 337 8055 03 337 87 0 337 87 337 837 09 337 80 89 337 80 90 337 80 9 337 877 6 337 807 60 7 75 76 77 78 79 Ball Trigger plate Data plate 9.53 mm 3/8 in. M5 x 8 mm M0 x 30 mm, Use LOCTITE 5 M0 x 35 mm, Use LOCTITE 5 337 807 58 3377 000 8 337 877 0 337 87 3 337 80 9 - LOCTITE is a registered trademark of Henkel Corporation. 5, 68 are trademarks of Henkel Corporation. 8
9
LPD-HD-RV 7 6 5 55 53 5 3 8 68 6 3 5 6 78 7 0 67 3 6 39 37 38 5 3 5 6 7 7 9 5 6 30 8 0 3 0 8 9 0 3 9 35 3 3 33 3 3 56 36 5 9 66 50 7 57 58 5960 6663 665 58 8 60 59 53 6 9 5 6 63 65 6 0
No. Quantity (-7) 3 5 6 7 8(9-) 9 0 3 5(6-8) 6 7 8 9 0 3 5 6 7 8 9 30 3 3 33 3 35 36 37 38 39 0 3 Accumulator, complete Accumulator body Diaphragm Accumulator cover Charging screw Protective nut Valve housing, complete Valve housing Fitting 0 Fitting 0 Ball Check valve screw Cylinder, complete Cylinder Fitting 0 Fitting 0 Piston Spool Guide socket Spool socket Locking ring Seal Wiper Trigger valve Back-up washer 8.7/3 x mm 0.3/0.5 x 0.039 in. M x.5 mm Use LOCTITE 5 Use LOCTITE 5 9/ x mm 0.35/0.55 x 0.039 in. Use LOCTITE 5 Use LOCTITE 5 M0 x 35 mm, Use LOCTITE 5 Use LOCTITE 5 Use LOCTITE 5 x.5 mm 0.9 x 0.06 in. 8 x mm 0.7 x 0.08 in. 3 x mm.6 x 0.08 in. 5. x.78 mm 0.99 x 0.07 in. 38/5 x 6 mm.50/.77 x 0. in. 38/8 x 7/0 mm.50/.89 x 0.8/0.39 in. ½ in. BSP (T) for 0 l/min, ½ in. BSP (T) for 35 l/min, ½ in. BSP (T) for 30 l/min, ½ in. BSP (T) for 0 l/min, ½ in. BSP Constant activated 30 x mm.8 x 0.06 in. 6 x mm 0. x 0.08 in. 8 x mm 0.3 x 0.08 in. 8 x.5 mm 3.3 x 0.06 in. 8 x.5 mm 0.7 x 0.06 in. 3 x.5 mm 0.5 x 0.06 in. 337 80 337 80 7 337 80 5 337 80 66 337 87 09 337 83 03 3376 70 7 337 80 5-337 87 33 337 83 337 807 7 337 807 8 337 80 6 337 80 30-337 87 33 337 83 337 80 8 337 87 3 337 80 65 337 80 66 337 80 67 337 807 0 337 807 03 337 807 05 337 807 6 337 807 5 337 807 9 337 807 5 337 8057 337 8057 337 88 0 337 880 3 337 8057 337 80 0 337 807 0 337 877 57 3376 000 8 337 857 35 337 807 5 337 807 8 337 87 9
No. Quantity 5 6 7 8 9 50 5 5 53 5 55 56 57(58-65) 58 59 60 6 6 63 6 65 66 67 68 Top plate Back-up washer Locking ring Nose part Bottom plate Bushing Handle Washer Lifting bracke On/off valve, complete On/off valve Quick-release coupling Quick-release coupling Protective cap Protective cap Tail hose Data plate 38.7/8 x.5 mm.5/.89 x 0.98 in. Welded assembly Hex 3 x 60 mm ( x 6 5 6 in.), Use LOCTITE 68 M x 75 mm, Use LOCTITE 5 M0 x 5 mm, Use LOCTITE 5 0 mm 0.39 in. M0 x 0 mm, Use LOCTITE 5 6.3 x. mm 0.6 x 0.09 in. ⅜ in. BSP M ½ in. BSP M ⅜ in. BSP ½ in. BSP Female Male Male, for QRC Female, for QRC.8 mm 0.07 in. M0 x 35 mm, Use LOCTITE 5 337 80 8 337 80 60 337 807 50 337 8 337 80 337 80 9 337 807 53 337 80 88 3376 000 0 3377 000 0 337 80 9 337 877 337 87 0 337 80 3 337 8037 63 3377 000 3 3377 063 75 337 8057 337 805 33 337 805 3 337 8057 3 337 8057 33 337 8030 68 337 87 3 - LOCTITE is a registered trademark of Henkel Corporation. 5, 68 are trademarks of Henkel Corporation.
3
Remote valve 3
No. Quantity 3 Remote valve Button 337 80 3 337 87 06 337 8 337 877 6 5
Tightening torque LPD-HD-T No. Tightening torque (Nm) 0 70 LOCTITE 5 337 87 3 Guide socket 00 LOCTITE 5 337 80 66 3 Spool socket 00 LOCTITE 5 337 80 67 3 55 (T) 337 8057 33 55 (T) 337 880 3 3 55 (T) 337 880 0 35 55 (P) 337 8057 5 60 LOCTITE 5 337 807 53 58 60 LOCTITE 5 337 877 79 0 LOCTITE 5 337 877 0 LPD-HD-RV No. Tightening torque (Nm) 0 70 LOCTITE 5 337 87 3 Guide socket 00 LOCTITE 5 337 80 66 3 Spool socket 00 LOCTITE 5 337 80 67 3 55 (T) 337 8057 33 55 (T) 337 880 3 3 55 (T) 337 880 0 35 55 (P) 337 8057 5 60 LOCTITE 5 337 807 53 58 60 LOCTITE 5 337 877 6 0 3377 000 3 70 0 LOCTITE 5 337 877 0 LOCTITE is a registered trademark of Henkel Corporation. 5 are trademarks of Henkel Corporation. 6
Working tools Driver kits A B Driver kit A Includes anvil rod (), solid adaptor (0-3), steel ropes, retainers and fasteners. Quantity Solid adaptor, round Solid adaptor, round Solid adaptor, round Solid adaptor, round For 6.0 in. tubes and 0 mm poles For Ø35-5 mm tubes For Ø05-5 mm tubes For Ø50 mm poles 337 8060 5 337 8060 53 337 8060 5 337 8060 55 Driver kit B Includes anvil rod (), anvil head (), guide adaptor (3-9), spacers, and fasteners. Quantity Guide adaptor, rectangular Guide adaptor, rectangular Guide adaptor, round Guide adaptor, round Guide adaptor, round Guide adaptor, round Guide adaptor, round For IPE/Sigma/C 00 mm beams For IPE/C 0 mm beams For.5 in. tubes and 70-75 mm poles For 3.0 in. tubes and 80-85 mm poles For 3.5 in. tubes and 95-00 mm poles For.0 in. tubes and 05-0 mm poles For 5.0 in. tubes and 5-35 mm poles 337 8060 5 337 8060 6 337 8060 7 337 8060 8 337 8060 9 337 8060 50 337 8060 5 7
Working tools 3 5 9 0 3 No. Quantity 3 5 6 7 8 9 0 3 Anvil rod Anvil head Guide adaptor, rectangular Guide adaptor, rectangular Guide adaptor, round Guide adaptor, round Guide adaptor, round Guide adaptor, round Guide adaptor, round Solid adaptor, round Solid adaptor, round Solid adaptor, round Solid adaptor, round Anvil rod Ø3 x 60 mm round shank Ø8 x 8 mm flat end For IPE/Sigma/C 00 mm beams For IPE/ C 0 mm beams For.5 in. tubes and 70-75 mm poles For 3.0 in. tubes and 80-85 mm poles For 3.5 in. tubes and 95-00 mm poles For.0 in. tubes and 05-0 mm poles For 5.0 in. tubes and 5-35 mm poles For 6.0 in. tubes and 0 mm poles For Ø35-5 mm tubes For Ø05-5 mm tubes For Ø50 mm poles Ø3 x 60 mm HEX shank 337 8 337 8 3 337 8 7 337 8 50 337 8 5 337 8 5 337 8 53 337 8 5 337 8 55 337 8 6 337 8 9 337 8 0 3376 0 77 337 8 88 8
Accessories Hoses and couplings Quantity Connection hose, complete Hose Ø in. L = 6 in. Ø.5 mm L = 0. m Ø in. L = 6 in. Ø.5 mm L = 0. m Bonded seal in. BSP 337 800 83 337 8030 50 337 8057 Quick-release coupling Female in. BSP 337 805 33 Quick-release coupling Male in. BSP 337 805 3 Protective cap Protective cap Twin hose, complete Female Male Ø in. L = 76 in. Ø.5 mm L = 7 m Bonded seal in. BSP 337 8057 33 337 8057 3 337 800 87 337 8057 Quick-release coupling Female in. BSP 337 805 33 Quick-release coupling Male in. BSP 337 805 3 Protective cap Protective cap Twin hose Connection hose, complete Hose Female Male Ø in. L = 76 in. Ø.5 mm L = 7 m Ø in. L = 6 in. Ø.5 mm L =.6 m Ø in. L = 6 in. Ø.5 mm L =.6 m Bonded seal in. BSP 337 8057 33 337 8057 3 337 8030 5 337 80 90 337 8030 6 337 8057 Quick-release coupling Female in. BSP 337 805 33 Quick-release coupling Male in. BSP 337 805 3 Protective cap Protective cap Label "P" Female Male Pressure side 337 8057 33 337 8057 3 337 80 5 9
Kits Seal kit Quantity Seal kit Protective nut Locking ring Seal Wiper Circlip Shim Seal Back-up ring Circlip Back-up washer Locking ring 8.7/3 x mm 0.3/0.5 x 0.039 in. M x.5 mm x.5 mm 0.9 x 0.06 in. 8 x mm 0.7 x 0.08 in. 3 x mm.6 x 0.08 in. 5. x.78 mm 0.99 x 0.07 in. 38/5 x 6 mm.50/.77 x 0. in. 38/8 x 7/0 mm.50/.89 x 0.8/0.39 in. ½ in. BSP PS 8 x x 0.5 mm 0.3 x 0.55 x 0.0 in. 8.3 x. mm 0.33 x 0.09 in. 6.3 x. mm 0.6 x 0.09 in. 8/ x 3.5/5 mm 0.7/0.55 x 0./0.0 in. 6 x mm 0. x 0.08 in. 8 x mm 0.3 x 0.08 in. 9/ x mm 0.35/0.55 x 0.039 in. 8 x.5 mm 3.3 x 0.06 in. 8 x.5 mm 0.7 x 0.06 in. 3 x.5 mm 0.5 x 0.06 in. 38.7/8 x.5 mm.5/.89 x 0.0 in. 337 800 87 337 87 09 3376 70 7 337 807 0 337 807 03 337 807 05 337 807 6 337 807 5 337 807 9 337 807 5 337 8057 337 87 3 337 807 00 337 87 00 337 87 0 337 8055 03 337 87 0 337 87 337 877 57 3376 000 8 337 807 8 337 807 5 337 807 8 337 87 9 337 80 60 337 807 50 0
Label kit Quantity Label kit Safety label Label Product label Product label Noise level label Product label N "Atlas Copco" "LPD-HD-T" "LPD-HD-RV" 337 8 59 337 8960 6 337 8960 6 337 8960 97 337 897 86 337 8960 06 337 897 87
Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. www.atlascopco.com