Handheld pneumatic rivet busters CP 408 P, CP 4 P, CP 408 D, CP 4 D CP 408 P CP 4 P CP 408 D CP 4 D Valid from serial number MHN009 MHN0094 MHN009 MHN0094 www.cp.com
CP 408 P, CP 4 P, CP 408 D, CP 4 D 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D Contents Contents General information................................................................................................................................... CP 408 P....................................................................... CP 4 P........................................................................ 8 CP 408 D...................................................................... 0 CP 4 D...................................................................... Working tools.................................................................... 4 Buster.......................................................................... 4 Buster.......................................................................... 4 Accessories....................................................................... Hose rolls....................................................................... Premounted universal hoses with claw couplings.................................... Water separator.................................................................. Lubricator....................................................................... CP airolene plus tool oil........................................................... 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D 4 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D General information This spare parts list applies to the following: Handheld pneumatic rivet buster CP 408 P Handheld pneumatic rivet buster CP 4 P Handheld pneumatic rivet buster CP 408 D Handheld pneumatic rivet buster CP 4 D Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! 9800 08 0a
P90 CP 408 P, CP 4 P, CP 408 D, CP 4 D CP 408 P 8 9 0 4 4 9 0 4 8 4 8 9 8 9 4 8 9 0 9 4 PARTS CAN EJECT FROM TOOL TO PREVENT INJURY DRAIN AND DISCONNECT AIR SUPPLY FROM TOOL BEFORE REMOVING LOCK SPRING FROM RETAINER WA xxx db 0 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D No. Remark Quantity (,4,,8,4) 4() 8(90) 9 0 Handle, complete Plug Valve tube Spring Valve Valve Throttle, complete Valve Throttle Oring Pin Push Tube Throttle, complete Bushing Tube Throttle Bushing Air inlet Valve " NPTF (With strainer) P00 4 P00 8 P00 8 P00 99 P08 0 P004 84 P00 P004 89 P00 99 4 (9) 8 9 4 8(90) 9 0 4 Pin Lever Lever Throttle Handle Valve, complete Case Valve Dowel Valve Lid Valve case Key Lock collar Clip Spring Deflector Exhaust Collar Lock Piston Sleeve Upper Sleeve Lower Bumper Cylinder, complete Cylinder Retainer Spring Lock Data Plate Safety label Warning label Noise level label Eject warning label Lock collar 8" Stroke P00 9 P00 98 P00 8 P00 9 0 000 8 P00 8 P00 P00 40 P00 P00 89 P00 99 0 000 94 P 988 P0 0 00 0 0 00 80 0 00 40 P0 94 0 0 00 P 90 0 00 9800 08 0a
P90 CP 408 P, CP 4 P, CP 408 D, CP 4 D CP 4 P 8 9 0 4 4 9 0 4 8 4 8 9 8 9 4 8 90 9 4 PARTS CAN EJECT FROM TOOL TO PREVENT INJURY DRAIN AND DISCONNECT AIR SUPPLY FROM TOOL BEFORE REMOVING LOCK SPRING FROM RETAINER WA xxx db 0 8 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D No. Remark Quantity (,4,,8,4) 4() 8(90) 9 0 Handle, complete Plug Valve tube Spring Valve Valve Throttle, complete Valve Throttle Oring Pin Push Tube Throttle, complete Bushing Tube Throttle Bushing Air inlet Valve " NPTF (With strainer) P00 4 P00 8 P00 8 P00 99 P08 0 P004 84 P00 P004 89 P00 99 4 (9) 8 9 4 8(90) 9 0 4 Pin Lever Lever Throttle Handle Valve, complete Case Valve Dowel Valve Lid Valve case Key Lock collar Clip Spring Deflector Exhaust Collar Lock Piston Sleeve Upper Sleeve Lower Bumper Cylinder, complete Cylinder Retainer Spring Lock Data plate Safety label Warning label Noise level label Eject warning label Lock collar " Stroke P00 9 P00 98 P00 8 P00 9 0 000 8 P00 8 P00 P00 40 P00 P00 89 P00 99 0 000 9 P 988 P0 0 00 0 0 00 8 0 00 40 P0 94 0 0 00 P 90 0 00 9800 08 0a 9
P90 CP 408 P, CP 4 P, CP 408 D, CP 4 D CP 408 D 4 8 9 4 4 9 0 0 8 4 4 89 8 9 4 9 0 0 PARTS CAN EJECT FROM TOOL TO PREVENT INJURY DRAIN AND DISCONNECT AIR SUPPLY FROM TOOL BEFORE REMOVING LOCK SPRING FROM RETAINER 8 WA xxx db 0 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D No. Remark Quantity (,4,8,9,) 4() 8 9(0) 0 Handle, complete Plug Valve tube Spring Valve Valve Throttle, complete Cap Oring Valve Throttle Throttle valve Oring Pin Push Tube Throttle, complete Bushing Tube Throttle Bushing air inlet Valve " NPTF (With strainer) P00 99 P00 884 P00 84 P00 P09 09 CA08 88 P00 8 P00 84 P00 99 4 () 8 9 4 8 9(0) 0 4 Pin Lever Lever Throttle Handle Valve, complete Case Valve Dowel Valve Lid Valve case Key Lock collar Clip Spring Deflector Exhaust Collar Lock Piston Sleeve Upper Sleeve Lower Bumper Cylinder, complete Cylinder Retainer Spring Lock Data plate Safety label Warning label Noise level label Eject warning label Lock collar 8" Stroke P00 P00 P00 8 P00 9 0 000 8 P00 8 P00 P00 40 P00 P00 89 P00 99 0 000 94 P 988 P0 0 00 0 0 00 80 0 00 40 P0 94 0 0 00 P 90 0 00 9800 08 0a
P90 CP 408 P, CP 4 P, CP 408 D, CP 4 D CP 4 D 4 8 9 4 4 9 0 0 8 4 4 89 8 9 4 9 0 0 PARTS CAN EJECT FROM TOOL TO PREVENT INJURY DRAIN AND DISCONNECT AIR SUPPLY FROM TOOL BEFORE REMOVING LOCK SPRING FROM RETAINER 8 WA xxx db 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D No. Remark Quantity (,4,8,9,) 4() 8 9(0) 0 Handle, complete Plug Valve tube Spring Valve Valve Throttle, complete Cap Oring Valve Throttle Throttle valve Oring Pin Push Tube Throttle, complete Bushing Tube Throttle Bushing air inlet Valve " NPTF (With strainer) P00 99 P00 884 P00 84 P00 P09 09 CA08 88 P00 8 P00 84 P00 99 4 () 8 9 4 8 9(0) 0 4 Pin Lever Lever Throttle Handle Valve, complete Case Valve Dowel Valve Lid Valve case Key Lock collar Clip Spring Deflector Exhaust Collar Lock Piston Sleeve Upper Sleeve Lower Bumper Cylinder, complete Cylinder Retainer Spring Lock Data plate Safety label Warning label Noise level label Eject warning label Lock collar " Stroke P00 P00 P00 8 P00 9 0 000 8 P00 8 P00 P00 40 P00 P00 89 P00 99 0 000 9 P 988 P0 0 00 0 0 00 8 0 00 40 P0 94 0 0 00 P 90 0 00 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D Working tools 4 8 Buster W L L T No. 4 8 Moil point Narrow chisel Loose rivet buster Tight rivet buster Driftpin driver Chisel ripper Backout punch Standard Backout punch Long clearance W (in.) L (in.) L T (in.) Wt (lb) 4 0 08 440 00 4.4 08 440 0 8 08 440 4 0 08 44 00 4.4 08 44 0 8. 08 44 4 0 08 44 00 4.4 08 44 0 8. 08 44 4 0 08 44 00 4.4 08 44 0 8. 08 44 Ø 8 4 4 9..0 08 44 00 08 444 00 8 9 9.8.8 08 44 00 08 44 0 4 9.8 08 44 08 44 40 8 9. 08 44 0 9 8 8 4 4 8 8 4 4 4 0 0 0...8. 08 448 0 08 448 08 448 40 08 448 0 08 448 0 08 448 80 Buster W L L T 4 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D No. W (mm) L (mm) L T (mm) Wt (kg) 4 8 Moil point Narrow chisel Loose rivet buster Tight rivet buster Driftpin driver Chisel ripper Backout punch Standard Backout punch Long clearance Ø 9 9 9 4 9 40 4 9 40 4 9 40 4 9 40 80 0 0 0 0 40 0 40 0 40 0 40 90 40 40 40 40 40 0 0 0 0.9.. 0.9.. 0.9.. 0.9.. 0. 0.9 0.8 0.8 0.8 0.9.0 0. 0. 0.8 0.9 0.9.0 08 440 00 08 440 0 08 440 08 44 00 08 44 0 08 44 08 44 00 08 44 0 08 44 08 44 00 08 44 0 08 44 08 44 00 08 444 00 08 44 00 08 44 0 08 44 08 44 40 08 44 0 08 448 0 08 448 08 448 40 08 448 0 08 448 0 08 448 80 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D Accessories Hose rolls Metric Inner diameter (mm) Thickness (mm) Maximum working pressure (bar) Length of roll (m) Weight (kg) RedX hose roll RedX hose roll RedX hose roll RedX hose roll RedX hose roll RedX hose roll 9 9 9.0.0.0... 0 00 0 0 00 0 8 0 8900 000 0 8900 000 8900 000 8900 000 8900 000 8900 000 Imperial Inner diameter (in.) Thickness (in.) Maximum working pressure (psi) Length of roll (ft) Weight (lb) RedX hose roll 4 4 90 9 4. 8900 000 0 RedX hose roll 4 4 90 9. 8900 000 RedX hose roll 4 4 90 0 9.4 8900 000 RedX hose roll 90 9. 8900 000 RedX hose roll 90. 8900 000 RedX hose roll 90 0 0. 8900 000 Premounted universal hoses with claw couplings Metric Inner diameter (mm) Thickness (mm) Maximum working pressure (bar) Length of roll (m) Weight (kg) RedX universal hose RedX universal hose 9.0. 4..0 8900 000 09 8900 000 Imperial Inner diameter (in.) Thickness (in.) Maximum working pressure (psi) Length of roll (ft) Weight (lb) RedX universal hose 4 4 90 0 8.8 8900 000 08 RedX universal hose 90 0.0 8900 000 4 Water separator Metric 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D Hose connection (mm) Air flow (l/s) Weight (kg) Water separator ( 4 in. BSP) 0.8 8900 000 00 Imperial Hose connection (in.) Air flow (foot /min) Weight (lb) Water separator ( 4 in. NPT) 4 0.8 8900 000 0 Lubricator Metric Hose connection (mm) Air flow (l/s) Oil volume (l) Weight (kg) Lubricator 00 ( in. BSP) 40. 8900 000 0 Imperial Hose connection (in.) Air flow (foot /min) Oil volume (US gallon) Weight (lb) Lubricator 4 ( in. NPT) 0 0.4. 8900 000 0 CP airolene plus tool oil Metric l container 4 x l container Oil volume (l) 8099 0 49 8099 0 Imperial. US gallon container 4 x. US gallon container Oil volume (US gallon)..8 8099 0 49 8099 0 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D 8 9800 08 0a
CP 408 P, CP 4 P, CP 408 D, CP 4 D 9800 08 0a 9
No. 9800 08 0a Copyright Atlas Copco Construction Tools AB STOCKHOLM SWEDEN