PROUT TSHEET Series PT evices
Series PT evices escription JTFUSE Series Radial Leaded PTs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With maximum volts and maximum ampere short circuit rating, they offer an ideal solution for US protection. Features short circuit rating V Operating voltages Fast time to trip Meets all US protection requirements RoHS compliant, LeadFree and HalogenFree* gency pprovals gency File Number E472196 pplications omputers & peripherals ny US application General Electronics pending Regulation Standard 2002/95/E EN14582 Page 1/6
Series PT evices Performance Specification Model 090 V max (V dc) I max () I hold @25 () 0.90 I trip @25 () 1.80 P d Typ. (W) 0.60 Maximum Time To Trip urrent () Time (Sec) 1.2 R i min (Ω) 0.070 Resistance R1max (Ω) 0.180 110 1.10 2.20 0.70 2. 0.050 0.1 15 1.5 2.70 0.80 4.5 0.0 0.120 0 1.60.20 0.90 9.0 0.00 0.110 185 1.85.70 1.00 10.0 0.00 0.090 250 2.50 5.00 1.20 12.50 5.0 0.020 0.060 00.00 2.0 15.00 1.0 0.08 0.11 0 4.00 6.80 2. 20.00 1.7 0.021 0.080 500 5.00 8.50 2.60 25.00 2.0 0.015 0.02 600 6.00 2.80 0.00. 0.010 0.028 700 7.00 11.90.00 5.00.5 0.008 0.022 800 1.60.00.00 5.0 0.006 0.021 900 9.00 15.0.0 45.00 5.5 0.005 0.018 0 10.00 17.00.60 50.00 6.0 0.004 0.012 1 11.00 18.70.70 55.00 7.0 0.004 0.011 1200 12.00 20. 4.20 60.00 7.5 0.004 0.010 1.00 2.00 4. 65.00 8.5 0.002 0.009 10 14.00 2.80 4.60 70.00 9.0 0.00 0.008 I hold = Hold urrent. Maximum current device will not trip in 25 still air. I trip = Trip urrent. Minimum current at which the device will always trip in 25 still air. V max = Maximum operating voltage device can withstand without damage at rated current (Imax). I max = Maximum fault current device can withstand without damage at rated voltage (V max). Pd = Power dissipation when device is in the tripped state in 25 still air environment at rated voltage. Ri min/max = Minimum/Maximum device resistance prior to tripping at 25. R1max = Maximum device resistance is measured one hour post reflow. UTION : Operation beyond the specified ratings may result in damage and possible arcing and flame. Environmental Specifications Test onditions Resistance change Passive aging +85, 0 hrs. Humidity aging +85, 85% R.H., 8 hours Thermal shock +85 to, 20 times Resistance to solvent MILST202,Method 215 Vibration MILST202,Method 201 mbient operating conditions : to +85 Maximum surface temperature of the device in the tripped state is 125 ±5% typical ±5% typical ±% typical No change No change Page 2/6
Series PT evices Thermal erating urve erating urves for Series 1.8 1.6 Percentage of Rated urrent 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 20 10 0 10 20 0 50 60 70 80 Temperature ( ) verage Timeurrent urve Time In Seconds 0 10 1 0.1 0.01 1 10 urrent In mperes Typical TimeToTrip urve at 25 0.75 0.90 1.10 1.5 1.60 1.85 2.50.00 4.00 5.00 6.00 7.00 8.060 9.00 10.0 11.0 14.0 15.0.0 JT FUSE Electronics orp. Page /6
Series PT evices Soldering Parameters TP 260 PreHeating Soldering Gradual 1 Minute Min. 5Sea.MX ooling Temperature ( ) 25 Time WVE SOLERING INFORMTIONS PreHeating Zone Soldering Zone ooling Zone ramping rate should not exceed 4 /Sec. solder temperature should not exceed 260 ooling by natural convection in air. Specifications are subject to change without notice. Page 4/6
Series PT evices Physical imensions(mm.) E E F a GF15 = Trademark = Radial type Vrms = 1.5 hold current Model E Lead Style 090 7. 12.20 110 7. 14.20 15 8.90 1.50 0 8.90 15.20 185 15.70 250 10. 14.0 00 7.10 11.00 0 8.90 15.20 500 10. 15.70 600 10.70 18.0 700 12.70 19.70 800 1. 20.10 900 14.00 24.90 0.50 24.90 1 17.50 24.90 1200 18.50 26.70.5 2.50 27.90.5 10 2.50 27.90.5 PHYSIL SPEIFITIONS : Materials : Leads Lead Solderability : evice Labeling : 090~250 : Tin plated copperclad steel, 24 WG (0.51mm/0.020" ia.) 00~1 : Tin plated copper, 20 WG (0.81mm/0.02" ia.) 1200~10 : Tin plated copper, 18 WG (1.0mm/0.04" ia.) MILST202, Method 208E evice is marked with Logo, amperage rating, voltage rating & date code. Page 5/6
Series PT evices Packaging Quantity Model Reel QTY ag QTY 090 ~ 600 700 ~ 900 0 ~ 10 Tape & Reel packaging per EI468 standard. 000 1500 500 500 500 ross Reference Model ross Reference Tyco / PolySwitch ourns / POLYFUSE Polytronics / EVERFUSE 090 RUSF090 MFRHT070 RLP090F 110 RUSF110 RLP110F 15 RUSF15 RLP15F 0 RUSF0 RLP0F 185 RUSF185 MFRHT200 RLP185F 250 RUSF250 RLP250F 00 RGEF00 MFRG00 RLP00GF 0 RGEF0 MFRHT450 RLP0GF 500 RGEF500 MFRG500 RLP500GF 600 RGEF600 MFRHT650 RLP600GF 700 RGEF700 MFRHT750 RLP700GF 800 RGEF800 RLP800GF 900 RGEF900 RLP900GF 0 RGEF0 RLP0GF 1 RGEF1 MFR1 RLP1GF 1200 RGEF1200 RLP1200GF MFRHT 10 RGEF10 RLP10GF PolySwitch is a registered trademark of Tyco Electronics. POLYFUSE is a registered trademark of Littelfuse,Inc. EVERFUSE is a registered trademark of Polytronics Technology orp. Page 6/6