SF-0603S Series - Slow Blow Surface Mount Fuses
|
|
- Allyson Hodge
- 5 years ago
- Views:
Transcription
1 SinglFuse SF-0603S Series Features n Slow blow thin film chip fuse for overcurrent protection n 608 (EI 0603) miniature footprint n Surface mount packaging for automated assembly n UL listed (UL 248-4) n RoHS compliant* and halogen free** Electrical Characteristics Model Rated Current (mps) SF-0603S Fusing ime Resistance (mω) yp.*** 350 Rated Voltage *** Resistance value was measured with less than 0 % of rated current. olerance ±25 %. ****ypical I 2 t value is measured at 0x rated current. reaking Capacity ypical I 2 t ( 2 s) **** DC 50 V / SF-0603S DC 50 V C 35 V SF-0603S SF-0603S SF-0603S SF-0603S SF-0603S25.25 Open within 5 sec SF-0603S50.50 at 250 % rated SF-0603S DC 32 V / current SF-0603S DC 32 V C 35 V 0.5 SF-0603S SF-0603S SF-0603S SF-0603S SF-0603S SF-0603S Reliability esting No. est Requirement est Condition Carrying Capacity No fusing Rated current, 4 hours 2 Fusing ime ithin 5 seconds 250 % of its rated current 3 Interrupting bility No mechanical damages 4 ending est No mechanical damages fter the fuse is interrupted, rated voltage applied for 30 seconds again Distance between holding points: 90 mm, ending: 3 mm, time, 30 seconds 5 Resistance to Solder Heat ±20 % 260 C ±5 C,0 seconds ± second 6 Solderability 95 % coverage minimum 7 emperature Rise <75 C 235 C ±5 C, 2 ±0.5 second 245 C ±5 C, 2 ±0.5 second (lead free) % of its rated current, measure of surface temperature 8 Resistance to Dry Heat ±20 % 05 C ±5 C,0 hours 9 Resistance to Solvent No evident damage on protective coating and marking 23 C ±5 C of isopropyl alcohol, 90 seconds 0 Residual Resistance 0k ohms or more Measure DC resistance after fusing hermal Shock DR < 0 % -20 C / +25 C /+25 C /+25 C, 0 cycles gency Recognition UL File Number... E98545 Environmental Characteristics Operating emperature C to +05 C Storage Conditions emperature...+5 C to +35 C Humidity...40 % to 75 % Shelf Life... 2 years from manufacturing date Moisture Sensitivity Level... ESD Classification (HM)...Class 6 RNING Cancer and Reproductive Harm * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 20/65/EU June 8, 20. ** ourns considers a product to be halogen free if (a) the romine (r) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total romine (r) and Chlorine (Cl) content is 500 ppm or less. SinglFuse is a trademark of ourns, Inc. he products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at
2 SinglFuse SF-0603S Series pplications n Portable memory n LCD monitors n Disk drives n PDs n Digital cameras n DVDs n Cell phones n Rechargeable battery packs n attery chargers n Set top boxes n Industrial controllers Solder Reflow Recommendations 250 Peak: /-5 C 230 C or higher EMPERURE ( C) C 50 C PRE-HEING ZONE 90 ± 30 Seconds PEK: /-5 C, 5 seconds PRE-HEING ZONE: 50 to 80 C, 90 ± 30 seconds SOLDERING ZONE: 230 C or higher, 30 ± 0 seconds 30 ± 0 Seconds SOLDERING ZONE 50 HEING IME Product Dimensions.6 ± 0. (.063 ±.004) 0.45 ± 0. (.08 ±.004) Recommended Pad Layout 0.8 ± 0. (.03 ±.004) 0.8 ± 0. (.03 ±.004) 0.35 ± 0.2 (.04 ±.008) 0.35 ± 0.2 (.04 ±.008) 0.9 ± 0. (.035 ±.004) 0.3 ± 0.2 (.02 ±.008) 0.3 ± 0.2 (.02 ±.008) 0.45 ± 0. DIMENSIONS: MM (INCHES) 2. ± 0. (.083 ±.004) Packaging Quantity hermal Derating Curve 5,000 pieces per 7-inch reel PERCEN OF RING (%) MIEN EMPERURE ( C) Construction & Material Content OVERCO Sn PLING FUSE ELEMEN Cu / Ni PLING CERMIC SUSRE
3 verage ime Current Curves Minimum I 2 V Clear ime Curves CLERING IME (S) 0. MIN. I2 (2 SEC) CURREN () CLERING IME (S) ypical Part Marking Represents total content. Layout may vary. RED CURREN () E = 0.40 N =.60 F = 0.50 S = 2.00 I = 0.63 = 2.50 J = = 3.00 K = 0.80 U = 3.5 L =.00 = 4.00 M =.25 Y = 5.00 P =.50 6 = 6.00 How to Order SinglFuse Product Designator SMD Footprint 608 (EI 0603) size Fuse low ype S = Slow blow Rated Current (400 m ) Packaging ype - 2 = ape & Reel (5,000 pcs./reel) SF S REV. J 0/9
4 SF-0603S Series ape and Reel Specifications SF-0603S Series ape Dimensions per EI ± 0.2 (.35 ±.008) P ± 0. (.57 ±.004) P 4.0 ± 0. (.57 ±.004) P ± 0.05 (.079 ±.002) F E. ± 0. (.043 ±.004).9 ± 0. (.075 ±.004) 3.5 ± 0.05 (.38 ±.002).75 ± 0. (.069 ±.004) D /-0 ( /-0) 0.64 ± 0. (.025 ±.004) Reel Dimensions Min. C 80 +0/-3.0 ( /-.8) 60.0 (2.362) 3.0 ±.0 (.52 ±.039) 9.0 ±.0 (.354 ±.039).4 ± 2.0 (.449 ±.079) DIMENSIONS: MM (INCHES) DI. DI. C DI. OOM PE OP PE D O P O F E PPER PE RESISOR PE P P 2 DIRECION OF UNREELING
5 Legal Disclaimer Notice his legal disclaimer applies to purchasers and users of ourns products manufactured by or on behalf of ourns, Inc. and Unless otherwise expressly indicated in writing, ourns products and data sheets relating thereto are subject to change and complete before placing orders for ourns products. he characteristics and parameters of a ourns product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on ourns knowledge of typical requirements in generic applications. he characteristics and parameters of a ourns product with other components the actual performance of the ourns product as meeting the requirements of a particular industry of ourns products are responsible for ensuring compliance with safety-related requirements and standards applicable to ourns on a case-by-case basis, use of any ourns ourns standard products that are suitable for use in aircraft standard the user s sole risk. custom products shall be negotiated on a case-by-case basis by ourns and the user for which such ourns standard products shall also apply to such ourns custom products. Users shall not sell, transfer, export or re-export any ourns ourns products and ourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. ourns products may not, without bilingual versions are available at: eb Page: PDF:
SinglFuse SF-1206HIxxxM Series Features
E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen
More informationSF-0603SP150M SF-0603SP200M SF-0603SP250M
E SinglFuse SF-0603SPxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Time Lag fuse n UL 248-14 listed n RoHS compliant* and halogen free** n Multilayer
More informationSinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
More information0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
More informationn For use in telecommunication circuit applications requiring low current protection with high surge tolerance
*RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring
More informationSinglFuse SF-1206HVxxM Series Features
*RoHS COMPLIANT & **HALOGEN FREE V SinglFuse SF-1206HVxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High voltage rating applications n High current rating
More informationCRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
More informationSRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
More informationMF-PSMF Series - PTC Resettable Fuses
*RoHS COMPLIANT Features Compact design to save board space - 0805 footprint Small size results in very fast time to react to fault events Symmetrical design Low profile RoHS compliant* and halogen free**
More informationNo. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
More informationKCA Series A-Type Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE Features Formerly a product Miniature Thermal Cutoff (TCO) device High current type Optimal corrosion resistant properties Smaller body size: L5.4 x W3.2 x H0.89 mm Overtemperature
More informationBourns SinglFuse. Thin Film Chip Fuse. Short Form Brochure
Bourns SinglFuse Thin Film Chip Fuse Short Form Brochure Bourns SinglFuse Products What's New in this Edition SF-0402F Series 0402 fast acting fuses SF-0402S Series 0402 slow blow fuses SF-0603F Series
More informationSA2 Series High Voltage Gas Discharge Tube
*RoHS COMPLIANT Features n Formerly a n High insulation resistance n Quick response, long service life n Available DC breakdown range: 2.4 kv to 7.2 kv n Wide operating temperature range n RoHS compliant*
More informationSRP7030F Series - Shielded Power Inductors
*RoHS COMPLIANT 8R2 Features Shielded construction Flat wire Unit height as low as 3. mm Inductance range:.1 to 1 μh Rated current up to 32 A RoHS compliant* This series is currently available but not
More informationSC Series Breaker (Surface Mount Thermal Cutoff Device)
00 SC 7 7 A 4134N Features n Miniature Thermal Cutoff (TCO) device n Surface mount, smallest body size n Overtemperature and overcurrent protection n Controls abnormal, excessive current virtually instantaneously,
More informationmm Square Sealed Panel Control
*RoHS COMPLIANT Features n Conductive plastic n PC board and bushing mount n Plastic or metal bushing and plastic shaft n Withstands typical industrial washing processes n Compact package saves board and
More informationKCA Series A-Type Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n High current type n Optimal corrosion resistant properties n Smaller body size: L5.4 x W3.2 x H0.89
More informationData Sheet. Customer: Automotive Grade Current Sensing Chip Resistor CS..A Series Size: 0402/0603/0805/1206/1210/2010/2512/1225/3720/7520
Data Sheet Customer: Product: Size: 0402/0603/0805/1206/1210/2010/2512/1225/3720/7520 Issued Date: Edition: 12-Jan-18 REV.6 VIKING ECH CORPORION VIKING ECH CORPORION KOHSIUNG RNCH UXI MEC CO., LD. No.70
More informationMeiLong Electronic Co.,Ltd. Lead Free Thin Film Chip Fuse. 1. Scope. 2. Construction. 3. Type Designation. Over Coat Conductor.
Lead Free Thin Film Chip Fuse Page 1/20 1. Scope This specification applies for the Lead-Free fuse se ries of thin film chip fuse made by ML. 2. Construction Over Coat Conductor Sn Plating Ceramic Substrate
More informationSpecification Status: Released
PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released
More informationPositive Temperature Coefficient (PTC) Data Sheet
Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable
More informationCC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
More informationFeatures. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationDatasheet RS Pro RS Series Thick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063W ±100ppm/ C RS Stock No:
Datasheet RS Pro RS Series hick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063 ±100ppm/ C RS Stock No: 716-8721 Product Details RS Pro 0402 thick film surface mount resistor with ±1% tolerance, provides
More informationCYG Wayon Circuit Protection CO., LTD.
CATALOG (2014) CYG Wayon Circuit Protection CO., LTD. CONTENTS Surface Mount Fuses 1206F Series. 2 0603F Series.5 1206S Series.8 0603S Series.11 Applications..14 Product Identification...14 Reliability
More informationSurface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSpecification. N1206 F Series. Approved by. Date of Establish : (Ref. No : 1206 F_Rev.2)
Specification Product Type SMD(Micro) Fuse N1206 F Series Approved by Date of Establish : 2012.11.01(Ref. No : 1206 F_Rev.2) 1. Scope This specification covers the detail requirements for SMD Micro fuse
More informationFundamentals. Overview. Multi-layer Design for Chip Fuses. Wire-In-Air Design for 2410SFV, 1206SFV Fuses. Figure SF1. Figure SF2.
Fundamentals Overview TE Circuit Protection offers the widest selection of surfacemount fuses available for addressing a broad range of overcurrent protection applications. Helping to prevent costly damage
More informationSPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES
SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES Table F1 Environmental Specifications for Table F2 Fuses Operating Temperature Mechanical Vibration
More informationThick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode construction
More informationSurface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationLow profile Fast response to fault current Compatible with high temperature solders
Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable for ultra portable applications where space
More informationCurrent Sensing Chip Resistors
FEURES SURFCE MOUNE 0805, 1206, 2010 ND 2512 CSE SIZE O RESISNCE ME SRI CONSRUCION RECISON OERNCE (±1%) ED & REE CKGING FOR ESY ICK ND CE REFO COMIE SECIFICIONS ype EI Size Material (See Note on EMF Characteristics
More informationData Sheet. Customer: Automotive Grade Anti-Sulfurated Chip Resistor AS..A Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: S.. Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 12-Jan-18 REV.6 VIKING ECH CORPORION VIKING ECH CORPORION KOHSIUNG RNCH UXI MEC CO., LD. No.70
More informationSurface Mount Fuses 0603Size> Slow Blow> S0603-S-5.0A
Page: 1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS
More informationSurface Mount Fuses 0603Size> Slow Blow> S0603-S Series
Revision:F Page:1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity
More informationData Sheet. Customer: Automotive Grade Chip Resistor CR..A Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: CR.. Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 12-Jan-18 REV.8 VIKING ECH CORPORION VIKING ECH CORPORION KOHSIUNG RNCH UXI MEC CO., LD. No.70
More information1/4" Square Single-Turn Cermet Sealed Trimmer
/4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning
More information6125FF Fast-acting subminiature fuses
Fast-acting subminiature fuses Supersedes March 2015 Applications Power supplies Servers LED/LCD televisions Appliances and white goods LCD monitor/backlight inverters Laptops and notebooks Agency information
More informationSurface Mount Fuses 1206 Size >Fast Acting>S1206-FA-8A~15A. General
Page: 1/ 6 General Fastacting 3.10mm 1.55mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -55 ~125 operating temperature Excellent environmental integrity RoHS
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More informationPOLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description
2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationFeatures. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationHigh Voltage Thick Film Chip Resistor MCHVR Series
eatures Highly reliable multilayer electrode construction Higher component and equipment reliability xcellent performance at high voltage Reduced size of final equipment pplications Inverter Outdoor quipments
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at
More informationSMD 0805, NTC Thermistors AgPd Terminations
NTCS0805E4.../2381 615 1... SMD 0805, NTC Thermistors AgPd REMARK Non preferred type (replaced by NTCS0805E3...T/2381 615 5...) QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 2K to
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
More information2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationSURFACE-MOUNT FUSES Slow-Blow Chip Fuses
SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges
More informationSURFACE-MOUNT FUSES Slow-Blow Chip Fuses
SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges
More informationSurface-mount Fuses Fundamentals
Surface-mount Fuses Fundamentals Overview TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping
More informationSolid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL
Solid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL PERFORMANCE/ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40088 Operating Temperature: - 55 C to + 125 C (above 85 C voltage derating
More informationNB 21 IEC SIZE : (.063) 0.2 (.008) 0.8 (.031) ±0.2 (.008) 0.8 (.031) ±0.2 (.008) 0.2 (.008) min 0.2 (.008) min
NC SMD hermistors NB 21 (Ni Barrier/100% Sn ermination) Chip thermistors are high quality and low cost devices especially developed for surface mounting applications. hey are widely used for temperature
More informationSurface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationSurface Mount Fuses 0603Size> Fast Acting > S0603-F Series
Page:1 of 6 General Fast Acting 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS
More informationNTC Thermistors, 2-Point Radial Leaded, Automotive Grade
NTC Thermistors, 2-Point Radial Leaded, Automotive Grade FEATURES High accuracy over a wide temperature range High stability over a long life Exceptional thermal shock withstanding performance AEC-Q200
More informationIs Now Part of. To learn more about ON Semiconductor, please visit our website at
Is Now Part of o learn more about ON Semiconductor, please visit our website at pril 2017 S1FL - S1MFL Surface General-Purpose Rectifier Features Ultra hin Profile Maximum Height of 1.08 mm UL Flammability
More informationThick Film Chip Fuse
Thick Film Chip Fuse Thick Film Chip Fuse is the best choice for the most fields of modern electronics. The controlled manufacturing process guarantees stable fusing characteristics in standard applications
More informationAutomotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors
Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 C W LIMITING ELEMENT VOLTAGE
More informationNTC Thermistors, Flex Foil Sensors
NTC Thermistors, Flex Foil Sensors QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 10K, 47K Tolerance on R 25 -value ± 3 % B 25/85 -value 3960 K Tolerance on B 25/85 -value ± 1 % Operating
More informationFeatures. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B
RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationSurface Mount Fuses 0603Size> Slow Blow> S0603-S Series
Measured I I T Surface Mount Fuses age:1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element o o -50 C~125 C operating temperature
More informationLC Series Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE 0 8 1 2 2 1 5 IX L C 7 7 AY 1 Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Low current type n Overtemperature and overcurrent protection for
More information1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
More informationNR Series Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE 6 7 5 1 1 2 1 5 C N R 7 7 C B 0 1 1 5 5 C N R 7 2 A B 0 Features n Miniature Thermal Cutoff (TCO) device n Smallest body size, high current type n Overtemperature and overcurrent
More informationThin Film Chip Fuses
Thin Film Chip Fuses FEATURES Advanced thin film technology Very quick acting fuse characteristics Outstanding stability of fusing characteristics Green product, supports lead (Pb)-free soldering Merial
More informationCurrent Sensing Chip Resistors
NC Series FEAURES HIGH OER SURFACE MOUNAE CASE SIZE AEC Q-200 QUAIFIED IDE RANGE OF RESISANCE VAUES (U O 500m) MEA SRI CONSRUCION RECISON OERANCE (±1%) REFO COMAIE RoHS Compliant includes all homogeneous
More informationApplications SPC K 100 K33 TR12. Capacitance Tolerance G = ±2% H = ±2.5% J = ±5% K = ±10% F 127 S L 471 K 100 V
SPC Series Encapsulated Double Metallized, Size 2824 6560, 100 630 VDC Overview Film capacitor for surface mounting. Double sided metallized film as electrode. Plain polyphenylene sulfide (PPS) as dielectric.
More informationPolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description
Low Rho SMD Series Description PolySwitch low resistivity SMD (surface-mount device) is a versatile device well suited for general applications which have space-constrained, low power dissipation and high
More informationFast response to fault current. General electronics. Maximum Time To Trip Current (A) Pd typ (W) Imax (A)
Description The 1812 series provides surface mount resettable overcurrent protection with holding current from 0.1A to 3.0A. This series offers complete portfolio in terms of holding current and working
More informationData Sheet. Customer: Automotive Grade Chip Resistor CR..A Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: CR.. Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 15-Jul-16 REV.7 VIKING ECH CORPORION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou ownship, Hsinchu
More information74x Series Chip Resistor Arrays
Features Low Cost Thick Film Technology Leadless Surface Mount Construction Concave Convex Terminations Solder Coated Nickel Barrier Pads Isolated and Bussed Circuit Configurations Improved TCR Tracking
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More informationAutomotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
More information*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04
FETURES RECTNGULR PCKGE ITH METL STRIP FUSE ELEMENT EI SIZES 42, 63, 85 ND 126 CURRENT RTINGS FROM.2 ~ 5. MPS SFETY STNDRD PPROVL (UL and c-ul File Number E32168) Pb-FREE COMPTILE ITH FLO ND REFLO SOLDERING
More informationSA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
More information23-23B/R6GHBHC-A01/2A
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. The product itself
More informationLow profile Fast response to fault current Compatible with high temperature solders
Description The 1206 series provides miniature surface mount overcurrent protection with holding current from 0.05A to 2.0A. This series is suitable for wide range of applications in modern electronics
More informationData Sheet. Customer: Automotive Grade Anti-Sulfurated Chip Resistor AS..A Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: S.. Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 15-Jul-16 REV.5 VIKING ECH CORPORION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou ownship, Hsinchu
More informationA16 Series PTC Devices
PROUT TSHEET Series PT evices Series PT evices escription JTFUSE Series Radial Leaded PTs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With
More informationMTC2 Series Isolated 2W SM 2:1 Input Single Output DC-DC Converters
MTC2 Series SELECTION GUIDE FEATURES UL 9 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection Output
More informationSMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationLow profile Fast response to fault current Compatible with high temperature solders
Description The 1206 series provides miniature surface mount overcurrent protection with holding current from 0.12A to 2.0A. This series is suitable for wide range of applications in modern electronics
More informationNTC Thermistor for Automotive: TSM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 1206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating,
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
More information15-22/R6G6C-A32/2T SMD B
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi -color type. Pb-free. The product itself
More informationPTC Thermistor for Automotive:TPM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code
More informationSURFACE-MOUNT FUSES Pulse Tolerant Chip Fuses
SURFACE-MOUNT FUSES have high inrush current withstand capability and provide overcurrent protection for DC power systems. These devices combine a silver fusing element and monolithic, multilayer design
More informationAutomotive Grade Surface-Mount Fuses
Automotive Grade Surface-Mount Fuses AEC-Q200 qualified TS6949 certified Anti-sulfur construction SolidMatrix Platform, QF series AirMatrix Platform, QA series www.aemcomponents.com / www.aemchina.com
More informationFUZETEC TECHNOLOGY CO., LTD.
NO. PQ18-01ER Product Specification and Approval Sheet Version A9 Page 1/5 Surface Mountable PTC Resettable Fuse: FSMD1206 Series 1. Summary (a) RoHS Compliant & Halogen Free (b) Applications: All high-density
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationCurrent Sensing Resistor Metal Foil Type >SMF Series
Page: 1 of 6 General Chip size from 0603 to Resistance value from 3mΩ to 200mΩ Low thermal EMF. Low TCR. Lead free, RoHS compliant for global applications and halogen free Application Switching model power
More informationTablet PC Automotive applications Printer Security systems VOP (V) Ibreak (A)
Description Current Limiting Module (CLM) is a chip type surface mountable device that can protect against both overcurrent and overcharging. It comprises a fuse element to ensure stable operation under
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More information9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer FEATURES Conductive plastic element Ultra compact (extra miniature module size) Multiple assemblies (up to seven modules) Shaft and panel sealed option Center mechanical
More information